Related
I am not good at writing bigggg threads. So let's get straight to the point.
CWM v6.0.5.1 for YU Yureka
Please note: You need to unlock your bootloader to flash this.
1.)Unlocking Bootloader:
1.) Power Down the device.
2.) Attach USB cable to your pc and then to your device. The LED near the speaker at the top goes red.
3.) As soon as the LED glows keep the vol up button pressed. You will see the fastboot screen.
4.)Now type in terminal:
Code:
fastboot -i 0x1ebf oem unlock
5.)This may delete all your data including the internal memory. Your bootloader is now unlocked.
6.) Now type this in terminal:
Code:
fastboot -i 0x1ebf flash recovery recovery-yu.img
7.) Done! Press vol up+ vol down + power button to boot into recovery. Flash SuperSu zip from here and attain root
What's working:
-flashing zips
-internal memory detected
-backup is successfully done.
What's not working:
I didn't get time to test much. You tell me
Kernel Sources: here
Downloads: recovery-yu.img
WoW! That was quick!! Thanks
TheStrix said:
WoW! That was quick!! Thanks
Click to expand...
Click to collapse
Hi,
Great, as any body try to flash the ROM on a CoolPad F2 8675-W00 (same ?)
Regards
Marc
mslr said:
Hi,
Great, as any body try to flash the ROM on a CoolPad F2 8675-W00 (same ?)
Regards
Marc
Click to expand...
Click to collapse
I would try if I had the ROM. Any one knows where to get one?
mslr said:
Hi,
Great, as any body try to flash the ROM on a CoolPad F2 8675-W00 (same ?)
Regards
Marc
Click to expand...
Click to collapse
DiZet said:
I would try if I had the ROM. Any one knows where to get one?
Click to expand...
Click to collapse
I would not recommend doing that
vishal_android freak said:
I would not recommend doing that
Click to expand...
Click to collapse
Why ?
It's not the same hardware ? same CPU Snapdragon 615, same memory, same camera, etc ... ?
Regards
Mar
mslr said:
Why ?
It's not the same hardware ? same CPU Snapdragon 615, same memory, same camera, etc ... ?
Regards
Mar
Click to expand...
Click to collapse
fetch kernel from coolpad f2 then unpack recovery img and replace kernel and repack hopefully it will wrk same goes with roms replace kernel
dont try without replacing kernel
or if u could build it yourserlf here is device specific sources https://github.com/YUPlayGod
this is exact clone of coolpad f2 and the sources have been fetched from coolpad f2 device tree
https://github.com/YUPlayGod/androi...mmit/06504ddcc2cfa19e6a06fca0abc7f1856244fd83
loooooooooooooool
cp8675 was the codename for coolpad f2 which was renamed to yureka later
https://github.com/YUPlayGod/android_device_yu_tomato/commits/cm-11.0?page=7
vishal_android freak said:
I am not good at writing bigggg threads. So let's get straight to the point.
CWM v6.0.5.1 for YU Yureka
Please note: You need to unlock your bootloader to flash this.
1.)Unlocking Bootloader:
1.) Power Down the device.
2.) Attach USB cable to your pc and then to your device. The LED near the speaker at the top goes red.
3.) As soon as the LED glows keep the vol up button pressed. You will see the fastboot screen.
4.)Now type in terminal:
Code:
fastboot -i 0x1ebf oem unlock
5.)This may delete all your data including the internal memory. Your bootloader is now unlocked.
6.) Now type this in terminal:
Code:
fastboot -i 0x1ebf flash recovery recovery-yu.img
7.) Done! Press vol up+ vol down + power button to boot into recovery. Flash SuperSu zip from here and attain root
What's working:
-flashing zips
-internal memory detected
-backup is successfully done.
What's not working:
I didn't get time to test much. You tell me
Downloads: recovery-yu.img
Click to expand...
Click to collapse
Please provide link to the kernel source you used, or note which kernel is used.
jerdog said:
Please provide link to the kernel source you used, or note which kernel is used.
Click to expand...
Click to collapse
Well my bad there. Completely forgot about it. Done.
sooorajjj said:
fetch kernel from coolpad f2 then unpack recovery img and replace kernel and repack hopefully it will wrk same goes with roms replace kernel
dont try without replacing kernel
or if u could build it yourserlf here is device specific sources https://github.com/YUPlayGod
this is exact clone of coolpad f2 and the sources have been fetched from coolpad f2 device tree
https://github.com/YUPlayGod/androi...mmit/06504ddcc2cfa19e6a06fca0abc7f1856244fd83
loooooooooooooool
cp8675 was the codename for coolpad f2 which was renamed to yureka later
https://github.com/YUPlayGod/android_device_yu_tomato/commits/cm-11.0?page=7
Click to expand...
Click to collapse
It's seen a little complicated for me, maybe with more information ?
I have a custom recovery TWRP Coolpad_8675_W00_Recovery
and i have two rom the official ota_full_040_P1_signed.zip and the custom Lollypop_Rom_coolpad_F2_w00.zip
maybe with this and a Yureka rom i can made a rom for coolpad but how ?
Regards
Marc
i tried this but it stands at waitinng for device for a long time .. its not detecting mine as a fastboot device
pls help
vishal_android freak said:
I am not good at writing bigggg threads. So let's get straight to the point.
CWM v6.0.5.1 for YU Yureka
Please note: You need to unlock your bootloader to flash this.
1.)Unlocking Bootloader:
1.) Power Down the device.
2.) Attach USB cable to your pc and then to your device. The LED near the speaker at the top goes red.
3.) As soon as the LED glows keep the vol up button pressed. You will see the fastboot screen.
4.)Now type in terminal:
Code:
fastboot -i 0x1ebf oem unlock
5.)This may delete all your data including the internal memory. Your bootloader is now unlocked.
6.) Now type this in terminal:
Code:
fastboot -i 0x1ebf flash recovery recovery-yu.img
7.) Done! Press vol up+ vol down + power button to boot into recovery. Flash SuperSu zip from here and attain root
What's working:
-flashing zips
-internal memory detected
-backup is successfully done.
What's not working:
I didn't get time to test much. You tell me
Kernel Sources: here
Downloads: recovery-yu.img
Click to expand...
Click to collapse
@vishal_android freak Do we need some software installed in PC to connect our phone??? Because, how to use a fastboot command without any drivers???
janajackie said:
i tried this but it stands at waitinng for device for a long time .. its not detecting mine as a fastboot device
pls help
Click to expand...
Click to collapse
aashking said:
@vishal_android freak Do we need some software installed in PC to connect our phone??? Because, how to use a fastboot command without any drivers???
Click to expand...
Click to collapse
See this thread HERE
is there any way to check the botloader status .. i flashed the recovery successfully .. but i am not sure wethere my bootloader got properly unlocked.. so is there a way to check it
janajackie said:
i tried this but it stands at waitinng for device for a long time .. its not detecting mine as a fastboot device
pls help
Click to expand...
Click to collapse
aashking said:
@vishal_android freak Do we need some software installed in PC to connect our phone??? Because, how to use a fastboot command without any drivers???
Click to expand...
Click to collapse
You need to add the vendor id. Without that it won't get detected. If you want to check if device is connected in fastboot, type in terminal:
Code:
fastboot -i 0x1ebf devices
Without "0x1ebf" it won't detect the device. Security measures Just follow steps in the first post
janajackie said:
is there any way to check the botloader status .. i flashed the recovery successfully .. but i am not sure wethere my bootloader got properly unlocked.. so is there a way to check it
Click to expand...
Click to collapse
If the recovery got flashed successfully that itself proves your bootloader is unlocked
thank you dude .. so i successfully did it ...this link also helped me
http://www.informationlord.com/unlock-bootloader-micromax-yu/
---------- Post added at 11:05 AM ---------- Previous post was at 11:02 AM ----------
so nw i got the device. its bootloader unlocked , cwm flashed and rooted.. i dont know any coding or rom development.. but if someone here has time.. pls give me a guide .. i will help you with my device.
You can upload backup cwm for which we coolpad?
I can retrieve the software if Brick.
If you want to send me the link for private and if it works I put it here.
Thanks for everything guys.
request for proprietary blobs
@vishal_android freak
if you have the device could u pls upload vendor propritary blobs to github by running extract-files.sh
thank you
janajackie said:
thank you dude .. so i successfully did it ...this link also helped me
http://www.informationlord.com/unlock-bootloader-micromax-yu/
---------- Post added at 11:05 AM ---------- Previous post was at 11:02 AM ----------
so nw i got the device. its bootloader unlocked , cwm flashed and rooted.. i dont know any coding or rom development.. but if someone here has time.. pls give me a guide .. i will help you with my device.
Click to expand...
Click to collapse
That link itself is based on this. Anyways, I have compiled cm11 for personal use. It's of no use making an altogether different thread for it because you are already running cyanogen
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Me_Ashish_ said:
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Click to expand...
Click to collapse
Don't worry have you backup you data?
if you have, just install the driver for qhusb
then your phone should be able to recognises by MIflash then flash any fastboot rom, You phone should be good to go.
I had a similar issue but i tried to hold the power button for like 30 seconds and the phone booted. If it didn't work, you should follow this thread: en.miui.com/forum.php?mod=viewthread&tid=73348&highlight=Mi3%2Bunbrick&mobile=no
partition error
u must download fastboot rom this link : http://en.miui.com/a-234.html > Xiaomi Mi 4 CDMA/WCDMA/LTE Latest Global Stable Version Fastboot File Download
and unzip change flash_all.bat file special this flash_all.bat link https://drive.google.com/file/d/0B2UMSvqNe0deMXFVeE13VGNHTTg/view
use flash_all.bat after max 6 minutes ready your phone
murattiy said:
partition error
u must download fastboot rom this link : http://en.miui.com/a-234.html > Xiaomi Mi 4 CDMA/WCDMA/LTE Latest Global Stable Version Fastboot File Download
and unzip change flash_all.bat file special this flash_all.bat link https://drive.google.com/file/d/0B2UMSvqNe0deMXFVeE13VGNHTTg/view
use flash_all.bat after max 6 minutes ready your phone
Click to expand...
Click to collapse
Did you personally tried that? Because flash all bat do uses fastboot to flash, which can't be accessed.
I wonder whether the other one u poster doesn't use fastboot, cant check the file content atm
I have tried many times
last times tried 3 hours ago, for alpha 5.12.24
my video under explain
http://m.youtube.com/watch?v=fSl9xrR_J4g
@murattiy that flash file didn't help either as it was based upon fastboot
But, the device was directly detected in MiFlash and simple flashing made it run lol
you need to do İnstall spacial flash_all.batt change to in flash_all.batt "cancro_global_images_V7.0.5.0.KXDMICI_20151016.0000.3_4.4_global"
dont use miFlash .. enough u clik speical flash_all.batt
If your device not boot into fastboot/recovery mode press power button for around 30-40 seconds .
and still not boot into fastboot/recovery mode
battery cable exist than try.. i tried many times))
Me_Ashish_ said:
I installed the latest 12.24 alpha version (http://bigota.d.miui.com/5.12.24/miui_MI3WMI4WAlpha_5.12.24_1e8fc7c2ed_6.0.zip) of MIUI 7 - MM (someone posted link on CM13 thread: http://forum.xda-developers.com/showpost.php?p=64500712&postcount=154)
I was on extended partition before. Everything succesfully got flashed in TWRP. But after rebooting system, phone died.
Connecting to PC I can see the device as QHUSUB (might have misspelled) and can see lots of drives connected (which it asks to format to use, which I won't as it ends up badly)
Any solution now? Otherwise like last time it got bricked, I will wait a day to battery get drained and than possibly hope for Fastboot to come back though I believe this issue can be fixed via PC only, not sure.
And I guess it got bricked due to extended partition as the ZIP probably merges both System.
Click to expand...
Click to collapse
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
From where can i get QHUSUB Bulk drivers?
Now Mi4 is not even getting detected by USB?
Prince Chandela said:
From where can i get QHUSUB Bulk drivers?
Now Mi4 is not even getting detected by USB?
Click to expand...
Click to collapse
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!
coolkillermax said:
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!
Click to expand...
Click to collapse
You don't need Qhusb driver. secondly can you boot in fast boor mode (power +vol-)?
回复: Bricked Mi3 - Showing QHUSUB Bulk in PC
Prince Chandela said:
You don't need Qhusb driver. secondly can you boot in fast boor mode (power +vol-)?
Click to expand...
Click to collapse
Fastboot can & if press volume up+power button Phone won't boot to twrp recovery… Just MI logo blinking……
Sent from S660 using xda premium 4
coolkillermax said:
Fastboot can & if press volume up+power button Phone won't boot to twrp recovery… Just MI logo blinking……
Sent from S660 using xda premium 4
Click to expand...
Click to collapse
flash miui fastboot rom then
Prince Chandela said:
flash miui fastboot rom then
Click to expand...
Click to collapse
Flashed many ROMs including MIUI 7 fastboot ROM = Not working After flash MI logo keep blinking
coolkillermax said:
Flashed many ROMs including MIUI 7 fastboot ROM = Not working After flash MI logo keep blinking
Click to expand...
Click to collapse
can you boot in recovery now?
Prince Chandela said:
can you boot in recovery now?
Click to expand...
Click to collapse
No...
http://forum.xda-developers.com/xiaomi-mi-3/help/mi3w-lost-partition-userdata-img-t3293583
Me_Ashish_ said:
@murattiy that flash file didn't help either as it was based upon fastboot
But, the device was directly detected in MiFlash and simple flashing made it run lol
Click to expand...
Click to collapse
Really need your help..
Can you explain it further?
please..
:crying: I was trying to root the phone with twrp in fastboot mode, but all of a sudden my pc shut down while still in fastboot twrp mode. and now my phone wont turn on. I cant boot into recovery, fastboot, no charge led, please guys help me.
Is it recognized when you plug it to your computer ?
mysa50 said:
Is it recognized when you plug it to your computer ?
Click to expand...
Click to collapse
it is recognized like qualocom 9008 usb bulk somethink like it, i dont remember, please help me and sorry for late reply I/m litterelly crying right now, please help me
mysa50 said:
Is it recognized when you plug it to your computer ?
Click to expand...
Click to collapse
My Pc recogonizes it as " Qualcomm HS-USBQDloader 9008 (COM10) "
https://forum.xda-developers.com/mi-5/help/bricked-mi5-t3528810
Good news so. Just download the fastboot version of the miui rom you want, download miflash tool (Google it) and use it to flash the rom. You can find full steps by step somewhere in the xda threads.
mysa50 said:
Good news so. Just download the fastboot version of the miui rom you want, download miflash tool (Google it) and use it to flash the rom. You can find full steps by step somewhere in the xda threads.
Click to expand...
Click to collapse
Sorry but i cant get into fastboot mode or recovery mode, will mi flash work without getting into fastboot mode?
vicky 1859 said:
Sorry but i cant get into fastboot mode or recovery mode, will mi flash work without getting into fastboot mode?
Click to expand...
Click to collapse
No need to enter in fastboot mode with miflash that's the point with this method. But you'll loose everything on your phone
mysa50 said:
No need to enter in fastboot mode with miflash that's the point with this method. But you'll loose everything on your phone
Click to expand...
Click to collapse
Thank you, will try now, but will take some time to download the rom, will definitely update on the process once i tried it. i really appreciate your reply, hope this works. thanks once again.
a million thanks
It worked, You are a life saver,:good::good::good::good: thank you very much for your assistance.
I would first recommend you to download any Mi 5 Fastboot image from MIUI forums than install it in Fastboot mode (Hold Volume down+ Power button) through ADB or MIflash tool.
Afterwards recharge your phone fully and then proceed to install TWRp and custom ROM (provided you have unlocked bootloader)
vicky 1859 said:
It worked, You are a life saver,:good::good::good::good: thank you very much for your assistance.
Click to expand...
Click to collapse
I have exactly the same problem
Can you tell us PLZ what you did?
And what tools are required
< new Mi5
ty
Sir Mohd said:
I have exactly the same problem
Can you tell us PLZ what you did?
And what tools are required
< new Mi5
ty
Click to expand...
Click to collapse
http://en.miui.com/a-234.html
Guys I wanted to install custom roms in my Xiaomi mi 5 , therefore got my bootloader unlocked and installed twrp recovery through adb . After that , I wiped my miui ROM after taking its backup and tried flashing aoscp ROM , which didn't flash . Thereafter , I restored the previous ROM and now whenever I reboot , it gets stuck on the initial startup screen where Mi logo is there .
Kindly suggest on what to do next since this is very worrying issue for me . Regards
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install Clarity kernel for better battery performance.
I try to tell you all the steps and informations you will need to help me :
1 - I unloacked bootloader using Mi unlock.
2 - I installed TWRP 3.1.1-0 and root my device this way : LINK (method 2)
3 - I flash in recovery mode last MIUI rom 9.5.5.0, phone still running well after that
4 - I boot in recovery and flash this firmware in order to flash Clarity Kernel after
5 - After flashing the firmware I reboot and Im stuck at MIUI logo. I can go to fastboot mode though. But unable to reach recovery mode neither switch off the phone.
6 - I install MiFlash and tried to flash different version of rom MIUI santoni from official website (9.5.5.0 / 8.2.10.0) neither work SEE IMAGE I tried with mi flash 2016.08.30 same result
I get different status on mi flash, one is (image not matching device), even though I think I did everything well.
7 - Since last try of flashing my computer does not even recognise my phone in fastboot mode like before :/ and MiFlash doesn't see my phone :/
Please give me some advice/clue to revive my phone :crying:
In advance I thank you so much :good:
I use Windows 10 - 64 bits
try booting recovery from fastboot "fastboot boot *twrp image*.img"
Niaph said:
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install..........
In advance I thank you so much :good:
I use Windows 10 - 64 bits
Click to expand...
Click to collapse
Well i am not at all an expert in miui, infact this is my first mi phone. But i think this tool called xiaomi adb/fastboot tool can help u. Google it.... It is available in reddit. One piece of general advice : before any kind of experiment always keep a preparation for the worst case scenario. I think ur phone is stuck at boot. U can try to hold the power button for about 10-15 seconds to turn off. Also just relax and have patience... It will b solved. Let me know how it goes.
Niaph said:
Hello Xda community,
I need help badly , I bricked my phone one week after receiving it !! My goal was to install Clarity kernel for better battery performance.
I try to tell you all the steps and informations you will need to help me :
1 - I unloacked bootloader using Mi unlock.
2 - I installed TWRP 3.1.1-0 and root my device this way : LINK (method 2)
3 - I flash in recovery mode last MIUI rom 9.5.5.0, phone still running well after that
4 - I boot in recovery and flash this firmware in order to flash Clarity Kernel after
5 - After flashing the firmware I reboot and Im stuck at MIUI logo. I can go to fastboot mode though. But unable to reach recovery mode neither switch off the phone.
6 - I install MiFlash and tried to flash different version of rom MIUI santoni from official website (9.5.5.0 / 8.2.10.0) neither work SEE IMAGE I tried with mi flash 2016.08.30 same result
I get different status on mi flash, one is (image not matching device), even though I think I did everything well.
7 - Since last try of flashing my computer does not even recognise my phone in fastboot mode like before :/ and MiFlash doesn't see my phone :/
Please give me some advice/clue to revive my phone :crying:
In advance I thank you so much :good:
I use Windows 10 - 64 bits
Click to expand...
Click to collapse
Nevermind I misread... If you think clarity or the firmware messed up your phone I could give you my kernel and firmware for you to restore it
Though if you're desperate for a solution, I'd transfer a ROM into your phone and start over with it, you can flash MIUI also by flashing https://drive.google.com/file/d/0ByWEieei-0nyMTR4R0dxWk9BTms/view after it
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Ok I solved the problem using this method.
So I removed back cover, disconnected battery, connected the 2 points with a twizzer then flashed STOCK rom and it worked!! So relieved!
Thank you for the help anyway.
Speaker87 said:
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Click to expand...
Click to collapse
Dear sir,
flashing redmi4 with miflash tool in edl shows me "object reference is not set to an instance of the object". Any solution please. This was second time i try flashing soft bricked redmi4 , first time few days ago flashed successfully and was using it properly in edl with miflash tool. Then During downloading update shown in setting by ota and rebooting it, and again got stuck on mi logo, means softbricked again.but try edl this time gives an error mentioned.
Speaker87 said:
Your version of miflash is a little bit outdated! The last One is from may, last year if my memory doesnt fail. Install latest version of miflash and try to flash again stock ROM.
You can try also flashing stock ROM with miflash but in edl mode (emergency download mode) , instead of fastboot mode, but to do that you have to acess stock recovery, and then use this command " adb reboot edl", connect your phone to PC, and then see of detects, then flash then stock ROM. To acess stock recovery, press volume up + Power, if that not works, press volume up + volume down+ Power. Hope i helped
Click to expand...
Click to collapse
chandan shah said:
Dear sir,
flashing redmi4 with miflash tool in edl shows me "object reference is not set to an instance of the object". Any solution please. This was second time i try flashing soft bricked redmi4 , first time few days ago flashed successfully and was using it properly in edl with miflash tool. Then During downloading update shown in setting by ota and rebooting it, and again got stuck on mi logo, means softbricked again.but try edl this time gives an error mentioned.
Click to expand...
Click to collapse
Problem solved.
I got revived my redmi 4 again from softbricked locked bootloader,
By trying an older rom
santoni_global_images_V8.2.12.0.MAMMIEA_20170629.0000.00_6.0_global_751410291c.tgzWith miflash-20220218 in edl mode .
Hi can somebody help me? i was on caos gsi and i tried to flash with fastboot the new global miui 12,now my phone wont boot.
i mean i still can access to fastboot and i tried to flash the gsi back,now my phone is stuck on '"redmi powered by android" but it's stuck there,no bootloop at all and i still can access recovery and fastboot
NorternLights said:
Hi can somebody help me? i was on caos gsi and i tried to flash with fastboot the new global miui 12,now my phone wont boot.
i mean i still can access to fastboot and i tried to flash the gsi back,now my phone is stuck on '"redmi powered by android" but it's stuck there,no bootloop at all and i still can access recovery and fastboot
Click to expand...
Click to collapse
May be your fastboot process failed...try again or go to recovery and clean all usure data
i tried,but now my phone is a pricey brick.
never again an mtk devices.
I have suffered this situation few days ago, I was using platform-tool to install MIUI 12.01 recovery rom using flash_all.bat but got bootloop everytime. Then I tried to flash the fastboot rom via Miflash tool and finally it booted up, it also re-locked bootloader after flashing, but the phone is live again!
I also tried to Wipe User Data in Recovery ([Volume up] + [Power]) before flashed the ROM with Miflash. Didn't know if it'd fixed the problem.
Have you try spflash tool yet?
fortunately i was able to recover the device using miflashtool then i sold it and i bought a redmi 9s
dont buy mtk devices guys,worst experience ever
You must know what you do on MTK than its ok!!!
-CALIBAN666- said:
You must know what you do on MTK than its ok!!!
Click to expand...
Click to collapse
Mtk is made for poor people..if mtk is not available then we can not buy a smart phone....