Related
Hello,
I have bought an Honor 5C, chinese version (NEM-UL10).
Can i flash any of the international (european) roms?
Thank you
Miguel
mjjferreira said:
Hello,
I have bought an Honor 5C, chinese version (NEM-UL10).
Can i flash any of the international (european) roms?
Thank you
Miguel
Click to expand...
Click to collapse
nop, only flash the one intended for ur model no
otherwise u may brick ur device:crying:
It does not work for the model NEM-AL10 3GB RAM, get a brick! AL10-2GB - lost SIM 100%
CHANGE OF THE LOCATION OF CN - EU
for the further ROM installation
To UNBLOCK the LOADER! SURELY!
Using TWRP installed instead "eRecovery" (recovery2) !!!
BACKUP for TWRP is ALSO OBLIGATORY!
(surely drill the status of an unblocking of the loader)
1) We establish hw_EU.zip through TWRP (Using TWRP installed instead "eRecovery" (recovery2)), after installation click reload.
2) The device will not be able to load the system , reboot and launch itself stock recovery, will be reset to factory default settings , you press SHUTDOWN button.
3) Turn on phone. Long start and optimization. Tapping the build number in Settings -> About 7 times, then going back and selecting the option from the Development menu.
Enable "OEM unlock" in the Development menu. So we will have flashing opportunity phone through fastboot if we receive a brick!
4) We throw on the card dload folder with UPDATE.APP firmware file on the region -EU (NEM-L51C432Bxxx), insert the card into the phone turned off , click the three buttons , waiting for the start of the upgrade process and all !!!)))
:good::good:
PS: In my hw_EU.zip archive three files are used:
custom.bin - the file in which contains one record in which belonging to the region - Vendor Country Info is specified
oeminfo - the binary file, contains information on a phone model and on the version of a firmware
build.prop - the system file from a specific firmware
All these three files from the European firmware of NEM-L51
Don't use this archive for change of a location in other phone models of Honor!!!
This archive - it isn't simple to replace a method a location
This archive - preparation of phone for the subsequent updating by a firmware from the European NEM-L51 model
You need to debrand your phone.
DRUGER said:
method has
I made the transition from Russian (European) firmware to the Chinese , and the Chinese in the European , fingerprint scanner is 100 %
CHANGE OF THE LOCATION OF CN - EU
for the further ROM installation
To UNBLOCK the LOADER! SURELY! To establish TWRP!
BACKUP for TWRP is ALSO OBLIGATORY!
(surely drill the status of an unblocking of the loader)
1) We establish hw_EU.zip through TWRP, after installation, we SWITCH OFF phone, you don't reboot!!!!
2) We return stock recovery, we do reboot, the device won't be able to load system, itself to reboot and will start stock recovery, there will be a dumping to factory, press the SHUTDOWN button
3) We turn on the device as usual, minutes 2-3 can hang on HONOR'S prompt, control of system and start of the device will go!
4) In the engineering menu we check vendor, in information about phone model and number of assembly
5) We throw in the dload folder, on a SD card, the firmware file from the region-EU, we insert the card into the switched-off phone, we press three buttons and wait for the update process!!!
Click to expand...
Click to collapse
does this work?????
has anyone tried??
venom007 said:
does this work?????
has anyone tried??
Click to expand...
Click to collapse
Finalize instructions, now all quickly and easily!
tested 100%
DRUGER said:
Finalize instructions, now all quickly and easily!
tested 100%
Click to expand...
Click to collapse
Good job
DRUGER said:
Finalize instructions, now all quickly and easily!
tested 100%
Click to expand...
Click to collapse
thats cool
As it worked for the 5x, it should work on almost any recent honor device, again good job
PalakMi said:
As it worked for the 5x, it should work on almost any recent honor device, again good job
Click to expand...
Click to collapse
I don't advise to use my instruction in other Honor devices for the reason that I used files specifically for NEM model!
it would work on device which has twrp support.
venom007 said:
it would work on device which has twrp support.
Click to expand...
Click to collapse
In my hw_EU.zip archive three files are used:
custom.bin - the file in which contains one record in which belonging to the region - Vendor Country Info is specified
oeminfo - the binary file, contains information on a phone model and on the version of a firmware
build.prop - the system file from a specific firmware
All these three files from the European firmware of NEM-L51
Once again I repeat!!! Don't use this archive for change of a location in other phone models of Honor!!!
This archive - it isn't simple to replace a method a location
This archive - preparation of phone for the subsequent updating by a firmware from the European NEM-L51 model
DRUGER said:
I don't advise to use my instruction in other Honor devices for the reason that I used files specifically for NEM model!
Click to expand...
Click to collapse
Roger that
can I use this method to change my nmo-l31 to the European NEM-L51 model ?
LIONS1 said:
can I use this method to change my nmo-l31 to the European NEM-L51 model ?
Click to expand...
Click to collapse
as said,only for NEM model
LIONS1 said:
can I use this method to change my nmo-l31 to the European NEM-L51 model ?
Click to expand...
Click to collapse
Don't even think about it
Just did this on my NEM-L21, and now I have an NEM-L51 ... So it works just fine
LINJEinc said:
Just did this on my NEM-L21, and now I have an NEM-L51 ... So it works just fine
Click to expand...
Click to collapse
do u have any problems so far after changing???
venom007 said:
do u have any problems so far after changing???
Click to expand...
Click to collapse
No problems so far, but haven't testing so much, have other things to do right now so.
But i will test more tonight after school.
LINJEinc said:
No problems so far, but haven't testing so much, have other things to do right now so.
But i will test more tonight after school.
Click to expand...
Click to collapse
ok, test it and report back
Hello,
My P9 is completed Wiped and dont want to Install a Firmware via DLOAD everytime i try to install it fails.
I cant use Fastboot because i have the Bootloader Unlock but the OEM is Locked.
I dont have the TWRP Recovery i only have the eRecovery.
Please Help me ..Thank you...
Mangono said:
Hello,
My P9 is completed Wiped and dont want to Install a Firmware via DLOAD everytime i try to install it fails.
I cant use Fastboot because i have the Bootloader Unlock but the OEM is Locked.
I dont have the TWRP Recovery i only have the eRecovery.
Please Help me ..Thank you...
Click to expand...
Click to collapse
I guess you and I are stuck with the same problem.
jonezie said:
I guess you and I are stuck with the same problem.
Click to expand...
Click to collapse
I solved The Problem if you need help say it
Mangono said:
I solved The Problem if you need help say it
Click to expand...
Click to collapse
Please help me out
Guide
jonezie said:
Please help me out
Click to expand...
Click to collapse
So i cant Garantee that this will work for you but it worked verry fine with my (EVA-L09).
1. I started my P9 in Fastboot Mode (Hold Volume Down + Connect USB Cable)
2. I used the Programm DC Phonix 35 at First and used Method 2 (see Link). I used the File for the Dual Sim Version (EVA-L19, you find the File on the Data Base of the DC Phonix Tool) of the P9 because there is no Version for the Solo Sim. But it worked verry fine.
3. After i completed Method 2 i started the Phone and saw that it worked again but it is an verry small android version with no function exept Phone Settings and some Huawei Internal Software.
4. I restarted the Phone into the Fastboot Mode and used Method 1 with the Update.app of the Firmware EVA-L09C432B136. But only do step 1. Step 2 will not work !! After the Process was completed i restarted it and it worked.
5. After that i Searched in the Android Options for an Update and found the EVA-09C432B182. You need to install it to fix some errors. After the Phone installed by itself the B182. I used the Huawei Updater with the Hisuite to Upgrade to B361 because the Phone didnt found a new Version by itself. Guide for Huawei Updater with Software Links
And now my P9 is on the EVA-09C42B361 and can find updates by itself i know the new B383 is out but i will wait a week than the Phone will find the Update by itself and i dont want to Brick it again. In the next Days your Phone will show you that the B383 is avalible.
I hope my Little Guide can Help you. If you have any Problems please write me I know that the DC Phonix tool costs Money but it was the only way it helped me. But i have some credits left at my account i think you can use them if you want
Sorry for my Bad english if there are some questions left please write me
Mangono said:
So i cant Garantee that this will work for you but it worked verry fine with my (EVA-L09).
1. I started my P9 in Fastboot Mode (Hold Volume Down + Connect USB Cable)
2. I used the Programm DC Phonix 35 at First and used Method 2 (see Link). I used the File for the Dual Sim Version (EVA-L19, you find the File on the Data Base of the DC Phonix Tool) of the P9 because there is no Version for the Solo Sim. But it worked verry fine.
3. After i completed Method 2 i started the Phone and saw that it worked again but it is an verry small android version with no function exept Phone Settings and some Huawei Internal Software.
4. I restarted the Phone into the Fastboot Mode and used Method 1 with the Update.app of the Firmware EVA-L09C432B136. But only do step 1. Step 2 will not work !! After the Process was completed i restarted it and it worked.
5. After that i Searched in the Android Options for an Update and found the EVA-09C432B182. You need to install it to fix some errors. After the Phone installed by itself the B182. I used the Huawei Updater with the Hisuite to Upgrade to B361 because the Phone didnt found a new Version by itself. Guide for Huawei Updater with Software Links
And now my P9 is on the EVA-09C42B361 and can find updates by itself i know the new B383 is out but i will wait a week than the Phone will find the Update by itself and i dont want to Brick it again. In the next Days your Phone will show you that the B383 is avalible.
I hope my Little Guide can Help you. If you have any Problems please write me I know that the DC Phonix tool costs Money but it was the only way it helped me. But i have some credits left at my account i think you can use them if you want
Sorry for my Bad english if there are some questions left please write me
Click to expand...
Click to collapse
Thanks so much for your help. I'll follow these steps as you've stated and see how it goes. By the way, I'm on single-sim Eva-L09C432B378. I'll try use the DC Phoenix 35 but it will cost me money as you've said. May I please use your leftover credits at your account?
Thanks in advance
jonezie said:
Please help me out
Click to expand...
Click to collapse
No Problem Please write me a Personal Message i dont Post My Account in this Public Thread
ADVICE, THIS IS A HARD HOW-TO AND YOU LOST ALL DATA ON YOUR DEVICE, THE RISK OF BRICK IS LOWWelcome to a V1 Version of th tutorial for convert the Single-SIM to Dual-SIM on Huawei P10+, based on experience of Huawei P9 Lite and researching for Huawei P10/P10+/Mate9
Requirements:
Pacience, more, more, pacience
BOOTLOADER Unlocked
Custom Recovery
Have a Unlock CODE (its needed for re-unlock the bootloader, for any mistake the bootloader relock after this how-to)
READ ALL HOW-TO
How-To:
First download the L29 ROM: THERE
Download OEMINFO DualSIM.zip from THERE
Download the Custom eRecovery without online comprobation of Firmware/Version of device (this can open the possibility of install any ROM for this Device with 3 Buttons of VKY-) : THERE
Copy the ROM of the L29, in External SD in the HWOTA folder, entire .zip files downloaded previusly
Extract .zip OEMINFO file and go to External SD TWRP/Backups/NUMEROSERIENUESTRODISPOSITIVO/ *and copy in this the folder of DualSIM*
Backup all data with Huawei Backup Utility
Reboot in RECOVERY and Backup all data
In recovery go to "restore" and select: VKY-L29C432DualSIM
Via Fastboot flash the erecoverycustom.img file with this commands:
fastboot flash recovery erecoverycustom.img
fastboot flash recovery2 erecoverycustom.img
REINSTALL Firmware (L29C432):
With the ROM on HWOTA of External SD Card
PowerOFF the device
Press simultanius VOL+, VOL- and POWER, you see the installation process, release the buttons
After the REINSTALATION, in SETTINGS, before Wi-Fi you seed "Setting Dual-Card" this is the important, its de Magic MENU! all finished
AVOID DONT RESTORE FROM RECOVERY BACKUP O YOU LOST ALL RELATED WITH DUAL-SIM
Only restore with the Huawei Backup app.
REGARDS!!
Thanks for the guide, but can anyone please explain the benefit in performing such a hack, for a phone to 'think' its another model if it doesn't have all the same features as the one it is imitating?
RoOSTA
Link for L29 ROM for convert to DUAL-SIM uploaded: https://mega.nz/#!dQ1XjTLR!c4bOE-GUs25WvLfb89VKXOwFJT5DqEX6wq7idOI-JBE
roosta said:
Thanks for the guide, but can anyone please explain the benefit in performing such a hack, for a phone to 'think' its another model if it doesn't have all the same features as the one it is imitating?
RoOSTA
Click to expand...
Click to collapse
The benefit is that it BECOMES dual SIM as it is only disabled in software not hardware.
---------- Post added at 03:42 PM ---------- Previous post was at 03:32 PM ----------
Great you have posted this How To BadWolfYe - only bits i am not sure of are the 'unlock boto loader' as see no instructions for this (unless i am being completely dim, which is possible!) and where to find an unlock code in case we need to relock the bootloader... or do we have to re-lock it after to get OTA? Actually if we do get OTA will be get the dual or single SIM OTA once upgradng to this?
Thank you for the guide.
Will it work for the P10 also?
Thank you
ioannis
Has anyone got this to work? This is my first Hauwei device so I wasn't 100% sure how to complete some of the steps. What I have a the moment is a phone that reports as having 2GB of RAM, 16GB of storage space and running Android 5.1. Could anyone please expand on this guide or let me know where I went wrong?
Okay, I don't really know how I managed to do it but I've managed to change the software of my L09 to that of an L29 and it works fine. So thanks for this guide.
After stumbling through this guide I ended up with a device that had some weird software with ndr90m test keys (whatever that means0. However he Dual SIM worked. So then I followed the guide from here with the firmware from this post and now I have phone that correctly (or should that be incorrectly as strictly speaking it was originally an L09) identifies a P10 Plus L29.
dave852 said:
Okay, I don't really know how I managed to do it but I've managed to change the software of my L09 to that of an L29 and it works fine. So thanks for this guide.
After stumbling through this guide I ended up with a device that had some weird software with ndr90m test keys (whatever that means0. However he Dual SIM worked. So then I followed the guide from here with the firmware from this post and now I have phone that correctly (or should that be incorrectly as strictly speaking it was originally an L09) identifies a P10 Plus L29.
Click to expand...
Click to collapse
Which one of the guides did you follow on that page? First or second?
Also... Just to confirm that all you did was use the 29 rom from here rather than the 09 from there?
Plus (sorry for all questions).... Your second sim now works ok?
Thanks
Adam
Sent from my VKY-L09 using Tapatalk
Hi all,
First of all: BadWolfYe! Thank you the guide!
So yesterday I got my new P10 plus, but I became really upset when I realized it is only one SIM version, so decided to make it 2
But!
OK, I did not do anything like this in the last few years, but I am not totally amateur. But I had problem wit it...
I did everything as written.
I restored the VKY-L29C432DualSIM and now I do not know what to do...
I know, next point, but my pc doesn't recognize the phone. And ADB doesn't either.
When I turn it on, it goes to Huawei erecovery, wants wifi and download something to recover.
It was TWRP recovery before on it, but it seems it disappeared after VKY-L29C432DualSIM...
Unfortunately I had to come to work, so could not play with it and to be honest I am too tired after this to think clearly.
Does anybody know how can I do the next step? (Via Fastboot flash the erecoverycustom.img file with this commands
Thanks.
adamelphick said:
Which one of the guides did you follow on that page? First or second?
Also... Just to confirm that all you did was use the 29 rom from here rather than the 09 from there?
Plus (sorry for all questions).... Your second sim now works ok?
Thanks
Adam
Sent from my VKY-L09 using Tapatalk
Click to expand...
Click to collapse
I used method 1 and the 29 ROM from here.
---------- Post added at 07:38 PM ---------- Previous post was at 06:57 PM ----------
I'll attempt a guide here that's maybe not the quickest way of doing it but it's the way that works for me. The guide also assumes you can manage to download a quick adb setup and use adb from the command line. Bear in mind that BadWolfYe has written guides on what I'm about to cover below and that's how I learnt. TWRP install by BadWolfYe.
0) Take working L09 phone and bootloader unlock code (I put the details of my phone into the Huawei website and got a code in return)
1) Enable developer options by going to Settings>About phone and tapping 'Build number' a bunch of times until it says you have enabled developer options.
2)Now go to Settings>Developer options and select 'enable OEM unlock'. Also enable USB debugging and ADB etc.
3)Download and rename twrp to twrp.img from the link in the BadWolfYe thread here
4)ADB reboot bootloader' from the command line and enter 'fastboot flash recovery twrp.img'
5)Press and hold volume up and power until you are in TWRP and then back up your OEM partition. (if you can't get into TWRP then you may need to repeat step 4 and also do 'fastboot flash recovery2 twrp.img).
6)Use the File manager in TWRP to replace the OEM files with files from the zip file download link in this thread above.
7)Restore OEM partition and then use the Shutdown option in TWRP.
8)Download the ROM from above This BadWolfYe link and unzip to find 3 files.
9)Place files in a folder called HWOTA on a microSD card and place card into phone
10) Download this file from this guide and extract to your computers hard drive.
11) run update.bat from that extracted contents as an administrator and follow the on screen instructions. The on screen instructions basically take you through from step four on the stechguide.com method 1 through to the end of the guide. I think I remember you get some options and I just use option 1 twice, from SD card and not rebrand.
If you can follow the guides they should work fine and you'll end up with a completely stock dual SIM phone with a locked bootloader.
From that point on I unlock the bootloader on mine again, install TWRP again and use it to flash Magisk 12 for root. Using root and Titanium Backup I restore my old device ID and a bunch of apps and settings and things are fine. However on the next reboot the launcher refuses to run and I'm left with an unusable phone (I don't know how to launch apps without the launcher) and I get error messages about running short of space as something has filled the internal memory with what appears to be junk files. I then start from step 8 in my guide and get a phone with a locked bootloader and no root but the device ID I want and all my apps and data.
If someone could offer me any help with regards to this last part I'd be grateful. I don't understand what causes the launcher issue.
Fixed...
Device ID, I think same - unfortunately my PC was stupid (nooo, not me) and I make the note in it so I lost it
2 SIM works - however only EE ones so the phone is locked. (Testing the online unlock code sellers )
Bootloader locked
Met "ndr90m test keys" as dave852, but hes linked page and 1. method helped. Oh, and could not install L29 ROM with volume + - and power, only with the linked method. I think that method could do everything after you opened bootloader, but will not test it. I am happy with my L29
But the important, there is a way to make L29 from L09
resch13 said:
Fixed...
Device ID, I think same - unfortunately my PC was stupid (nooo, not me) and I make the note in it so I lost it
2 SIM works - however only EE ones so the phone is locked. (Testing the online unlock code sellers )
Bootloader locked
Met "ndr90m test keys" as dave852, but hes linked page and 1. method helped. Oh, and could not install L29 ROM with volume + - and power, only with the linked method. I think that method could do everything after you opened bootloader, but will not test it. I am happy with my L29
But the important, there is a way to make L29 from L09
Click to expand...
Click to collapse
I would guess it would be possible using the files from the OEM backup you made (if you kept them) and a downloaded L09 ROM (available in a few places) but I'm not 100% sure and I'm not going to try it.
dave852 said:
I would guess it would be possible using the files from the OEM backup you made (if you kept them) and a downloaded L09 ROM (available in a few places) but I'm not 100% sure and I'm not going to try it.
Click to expand...
Click to collapse
No, I have not any backup. I forgot to made any so I am lucky that I did not need it
I somehow managed to convert my single sim to dual-sim but unfortunately i cannot modify nor set any ringtone to the 2nd sim. Any ideas of how i can fix it ?
LOL. I gave this several attempts, alas, without success. I kept ending up with the test keys / strange device ID (ION something).
So I decided to skip my rebranding attempt and go back to L09. After "rebranding" it to L09 again and after flashing B130 for L09 I ended up with dual SIM support anyway. Eveything seems to be checking out as far as I can tell. Not sure if OTA will work though, time will tell I guess. Safety net etc. also checks out.
The options for dual SIM are showing and I've tested it. Everything just works.
Can anyone confirm that after enabling the second SIM slot that their phone now has 2 x IMEI numbers?
I just recently purchased p10 plus . for 3days the Fone was working fine both sims 3/virgin then suddenly emergency calls only on 2nd sim. I tried to deactivate activate ect ect . until I lost both sims. Soft hard reset sim 1/working sim2 emergency calls only. If I swap the sims around in the tray same issue . then with only one sim either 3/virgin full teceotuin if I make or receive a call after the call I have no reception I wil l need to swap the sim from tray1 to tray 2 . and the funny thing is both sims will receive and send texts all day long with no issues
Any ideas
Thanks in advance
Has anybody done this and checked warranty status in Huawei Hi Care app?
I can confirm this works 100%. Dualsim working. Serial, imei all still the same. Recovery back to original too
Sent from my VKY-L29 using Tapatalk
Hello and THX for the HowTo whch worked well!!!
My Phone is shoing that there is an update (VKY-L29C432B133-FULL 2.76GB) which i try to install via the regular updater, however the updates always failes. I already installed the default recovery image.
Any Idears?
ERROR: Package Checksum
... Never mind - it was a network error on my e1000 :fingers-crossed:
After installing twrp recovery i decided to install SU too. After that my phone is stuck in bootloop, before SU installation it worked just fine (with just the twrp) ;[
So here's my phone info (all i could get):
Model: PRA-LX1 (other ppl place here some diffrent numbers but i dont know where to find them since i cant even start my phone)
FCC ID: QIPRA-LX1
Well if someone could find a stock frimewere (or pre-rooted custom rom that would work on this phone) and give a link to it i would be greatfull couse i searched a lot and i'm still with nothing.
Now im left with empty brick with no OS at all...
Help! ;[
Maybe you should try this, it may find the proper firmware for your device.
Firicel69 said:
Maybe you should try this, it may find the proper firmware for your device.
Click to expand...
Click to collapse
The problem is there are a ton of diffrent versions of this PRA-LX1 and i dont know which one to chose...
Wilchu said:
The problem is there are a ton of diffrent versions of this PRA-LX1 and i dont know which one to chose...
Click to expand...
Click to collapse
Wrong thread mate, open this in P9Lite not in P8Lite
If this is P8 Lite 2017, we have seperate subforum for it :highfive:
D1stRU3T0R said:
Wrong thread mate, open this in P9Lite not in P8Lite
Click to expand...
Click to collapse
... But this is P9 Lite "2017" and what i heard is that this model comes with name of P8 Lite 2017 and if im not wrong there is no P9 Lite "2017" thread just P9 Lite which is completly diffrent device!
Let's do this in a diffrent way...
If there is a person who owns the same phone and the same model PRA-LX1 which is the only thing written on the box,
then i ask you to do a twrp system backup and maybe give the file to me.
Wilchu said:
If there is a person who owns the same phone and the same model PRA-LX1 which is the only thing written on the box,
then i ask you to do a twrp system backup and maybe give the file to me.
Click to expand...
Click to collapse
https://forum.xda-developers.com/huawei-p9lite/development/rom-custom-rokangtex-rom-t3624816
I hope it's working.
D1stRU3T0R said:
https://forum.xda-developers.com/huawei-p9lite/development/rom-custom-rokangtex-rom-t3624816
I hope it's working.
Click to expand...
Click to collapse
Thanks! I'll test it out but i have another question is there a way to install rom through pc maybe couse twrp is acting weird and i dont trust it so much...
To be more precise i get updater error: 7 every time when i try to flash the rom
And after that phone booted but i got encryption error, and cant do much
Wilchu said:
Thanks! I'll test it out but i have another question is there a way to install rom through pc maybe couse twrp is acting weird and i dont trust it so much...
To be more precise i get updater error: 7 every time when i try to flash the rom
(but i will still try tho)
Click to expand...
Click to collapse
Yeah, with flash. Search universal flashboot anf than flash everything in order (these are not the orders, just an ex) flashboot boot boot.img flashboot recovery recovery.img etc(extracted from the zip file, maybr with huawei extractor)
But try to update you're TWRP, either to personas one or OpenKirin's TWRP, you should not have any problem on TWRP 3.1.1-0
Quick update nothing new, nothing works just gonna go to huwaei service room and hope that they can fix this... :[
Wilchu said:
Quick update nothing new, nothing works just gonna go to huwaei service room and hope that they can fix this... :[
Click to expand...
Click to collapse
Did you go to the P8 Lite 2017 thread? I think that device has the same model number
Wilchu said:
Quick update nothing new, nothing works just gonna go to huwaei service room and hope that they can fix this... :[
Click to expand...
Click to collapse
First.. i supose you have TWRP ...
So, if im not wrong, your phone use 3 files to install the firmware ( like P8 Lite 2017 )...
Must be like this:
Download the 3 zip files (update.zip, cust and public data) of the firmware you want to flash and copy them to your phone’s memory.
Unplug the USB cable and power off your device.
Now hold Vol up + Power keys for a few seconds to boot into TWRP mode.
In TWRP, go to Install and flash the update.zip package.
After that, install the remaining two update files (cust and then the public data package).
Wipe the dalvik cache( or do a factory reset ) and then reboot normally into the new system.
Now the ROM... i don´t know where you can find it, sorry ...
.
REALLY IN NEED FOR HELP:crying:
Followed this guide youtube.com/watch?v=2tAeNZdTyeY to install Resurrection Remix on my P9 EVA-L19. After booting the phone, it is just stuck on the boot animation. I panicked and restored to the stock rom. After booting the device, it gets stuck at the "unlocked bootloader" screen.
So I tried to restore the rom through the eRecovery process but gave me an error.
So then I tried the dload process where I copy the UPDATE.APP to my SD card(FAT32) and failed. it stopped at 5% and said "Software install failed!"
I really don't know what to do next.
Any suggestions will be highly appreciated.
Thanks.
Béresford_G said:
REALLY IN NEED FOR HELP:crying:
Followed this guide youtube.com/watch?v=2tAeNZdTyeY to install Resurrection Remix on my P9 EVA-L19. After booting the phone, it is just stuck on the boot animation. I panicked and restored to the stock rom. After booting the device, it gets stuck at the "unlocked bootloader" screen.
So I tried to restore the rom through the eRecovery process but gave me an error.
So then I tried the dload process where I copy the UPDATE.APP to my SD card(FAT32) and failed. it stopped at 5% and said "Software install failed!"
I really don't know what to do next.
Any suggestions will be highly appreciated.
Thanks.
Click to expand...
Click to collapse
There is a RR thread for P9, I'd suggesr to ask there about the RR installation and issues (these topics opened under Q&A practically nobody reads, specially not those few who know more about RR)
https://forum.xda-developers.com/p9/development/rom-t3767344
For safe reverting back to stock you should have used HWOTA method (maybe it will still work if your Bootloader is unlocked and/or you have TWRP for EMUI 5.x)
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
zgfg said:
There is a RR thread for P9, I'd suggesr to ask there about the RR installation and issues (these topics opened under Q&A practically nobody reads, specially not those few who know more about RR)
https://forum.xda-developers.com/p9/development/rom-t3767344
For safe reverting back to stock you should have used HWOTA method (maybe it will still work if your Bootloader is unlocked and/or you have TWRP for EMUI 5.x)
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
Click to expand...
Click to collapse
thanks for the links. How can I find out my phone model name and cust number. I already know that it is the EVA-L19 version but I dont know the cust number due to the fact that I cant boot.
Béresford_G said:
thanks for the links. How can I find out my phone model name and cust number. I already know that it is the EVA-L19 version but I dont know the cust number due to the fact that I cant boot.
Click to expand...
Click to collapse
I don't know if that is possible, I know it's too late now but whenever I'm going to play with ROMs or so, I save screenshots of my Settings/About and all things like that (IMEI, etc), just in case (like this case).
Maybe you can figure out by:
- was it International cust c432, Mideast c185, or provided by some operator, see
https://www.huaweiblog.de/firmware-update-was-bedeutet-cust-emui-und-co/
- have you debranded the phone
- btw, before installing RR did you check if RR is compatible to install over your (at that time) stock ROM
- Have you installed a firmware from FirmwareFinder, by DLOAD, HWOTA or other methods
Eg, if it was c432 and if you did not manually update, it was likely b393 as the last approved build for L19
zgfg said:
I don't know if that is possible, I know it's too late now but whenever I'm going to play with ROMs or so, I save screenshots of my Settings/About and all things like that (IMEI, etc), just in case (like this case).
Maybe you can figure out by:
- was it International cust c432, Mideast c185, or provided by some operator, see
https://www.huaweiblog.de/firmware-update-was-bedeutet-cust-emui-und-co/
- have you debranded the phone
- btw, before installing RR did you check if RR is compatible to install over your (at that time) stock ROM
- Have you installed a firmware from FirmwareFinder, by DLOAD, HWOTA or other methods
Eg, if it was c432 and if you did not manually update, it was likely b393 as the last approved build for L19
Click to expand...
Click to collapse
I fixed the phone! I used the link u shared about the HWOTA and followed the steps. I did a lot of research about the model number and the cust and found out on the Huawei site that my phone is the EVA-19C185. So I installed the update and it worked! Thank you so much for your help. Really appreciate it.
Béresford_G said:
I fixed the phone! I used the link u shared about the HWOTA and followed the steps. I did a lot of research about the model number and the cust and found out on the Huawei site that my phone is the EVA-19C185. So I installed the update and it worked! Thank you so much for your help. Really appreciate it.
Click to expand...
Click to collapse
Ok - good. Please help to others when they will simlarly seek for help
zgfg said:
Ok - good. Please help to others when they will simlarly seek for help
Click to expand...
Click to collapse
Hi There, i followed the same link and instructions, i was in RR 7.1.2 and didnt rember witch version i had before updating to it. i've downloaded the eva-l09 c342 b394 (wich seemed to me similir or identical by memory) i'v done the folder in the correct way. lauched trwp installed the script, it opened what it was suposed to but as soon i got to 57% the phone rebooted.. and now doesnt go beyond a dark screen after the logo. i'm able to open the erecovery and fastboot mode . what do i have to do now? install trp? bootloader its stil unlocked.