Related
Hi everyone!. I purchased my Huawei P9 dual sim (Chinese Version- AL00) 2 weeks ago. I unlocked its bootloader and changed OEM to EVA-AL19C636 and flashed Nougat Beta. Then I reflashed back to EMUI 4.1 (AL19C636B190) but I forgot to flash HUAWEI P9 Rollback Package (EVA-L19, from EMUI5.0+Android7.0 rollback to EMUI4.1+Android 6.0, C900B300). Everything flashed OK, the phone restarted but there is a bootloop at Huawei logo. It cannot be turned off. No recovery,no download mode, cannot force updat, nothing except fastboot. Bootloader is locked again and I cannot unlock it (though I have unlock code). I tried many times but no success. There is always an error:
"FAILED: Remote: Command not allowed"
I can't flash anything using fastboot.
Anybody helps me!. I really need help. Plz!
ledinhbac said:
Hi everyone!. I purchased my Huawei P9 dual sim (Chinese Version- AL00) 2 weeks ago. I unlocked its bootloader and changed OEM to EVA-AL19C636 and flashed Nougat Beta. Then I reflashed back to EMUI 4.1 (AL19C636B190) but I forgot to flash HUAWEI P9 Rollback Package (EVA-L19, from EMUI5.0+Android7.0 rollback to EMUI4.1+Android 6.0, C900B300). Everything flashed OK, the phone restarted but there is a bootloop at Huawei logo. It cannot be turned off. No recovery,no download mode, cannot force updat, nothing except fastboot. Bootloader is locked again and I cannot unlock it (though I have unlock code). I tried many times but no success. There is always an error:
"FAILED: Remote: Command not allowed"
I can't flash anything using fastboot.
Anybody helps me!. I really need help. Plz!
Click to expand...
Click to collapse
Sorry 4 u! I just wanna ask u if the nougat rom was working good! I want to flash EVA-L19 rom to EVA-AL00! Why u wanted to rollback? Can u tell me the method u used to flash... Thx
Addymore said:
Sorry 4 u! I just wanna ask u if the nougat rom was working good! I want to flash EVA-L19 rom to EVA-AL00! Why u wanted to rollback? Can u tell me the method u used to flash... Thx
Click to expand...
Click to collapse
As I said, I changed it into EVA-AL19C636 then updated to Nougat, not AL00 updated to Nougat.
There is no problems with EMUI 5.0 but I want to have rooted firmware so I returned to EMUI 4.1. But .....I'm facing with my problem
Anyone can help me?
Help me via Teamview
ledinhbac said:
As I said, I changed it into EVA-AL19C636 then updated to Nougat, not AL00 updated to Nougat.
There is no problems with EMUI 5.0 but I want to have rooted firmware so I returned to EMUI 4.1. But .....I'm facing with my problem
Click to expand...
Click to collapse
Can u tell me how u changed to EVA-L19? I want this EMUI 5 and it seems the EVA-AL00 is not getting it anytime soon....and I don't want the chinese stuffs....
You have to change the oem.info into Al19 (using SRK tool) then flash Al19 rom.
hi ledinhbac
I experienced the similar issue with you. I rollback to EMUI 4.1 (AL19C636B190) directly from (L19C636B190) by flashing a HUAWEI P9 Rollback Package (EVA-L19, from EMUI5.0+Android7.0 rollback to EMUI4.1+Android 6.0, C900B300) instead of updating to L19C636B361. [ wrong SD card inserted].
My phone restarted but there is a bootloop at Huawei logo. It cannot be turned off. It can only go into fastboot mode. Bootloader is locked and I cannot unlock it (though I havent unlock code). I tried
There is always an error:
"FAILED: Remote: Command not allowed"
Could you solve the above situation?
Hello everybody. I am looking for the oeminfo's file for p10 lite in order to debrand my phone as for my ex P9 Lite and ex P8 Lite.
French Carrier Orange : WAS-LX1AC109B100
I want c432 to debrand and enable dual sim option
Thanks in advance
Hello,
If you find it please tell me !
Thank you
bu3304 said:
Hello everybody. I am looking for the oeminfo's file for p10 lite in order to debrand my phone as for my ex P9 Lite and ex P8 Lite.
French Carrier Orange : WAS-LX1AC109B100
I want c432 to debrand and enable dual sim option
Thanks in advance
Click to expand...
Click to collapse
How do you debrand ? I want debrand mine
Hello,
I just unbranded mine and enabled Dual SIM.
I have to say it is not free... but the seller support is really great.
So from a bricked one (see my other topic) I revived it with DC Phoenix.
and then with DC-Unlocker seller'ss help, with HCU Client + DC Phoenix we succeeded to flash unbranded C432B105 ROM, and then enable the second SIM slot.
DC Phoenix is for flashing ROMs from DC-Unlocker's support area.
HCU Client is for changing values like Vendor, Country, Model...
I can't be very specific about the exact procedure (I'll let you guess why...) but the things I can tell :
1/ Flashed Warsaw-L01_C432B105_Firmware_United Kingdom_Nonspecific_Android7.0_EMUI5.1.APP with DC Phoenix (Fastboot mode and then Upgrade mode)
2/ Flashed Warsaw-L21A_C432B105_update_data_customization_hw_eu.APP with DC Phoenix (Upgrade mode only, no need for fastboot mode)
3/ Changed some values with HCU Client like :
- Model name : WAS-L01A -> WAS-L21A (not sure it was really usefull, a guess from P10 with its VTR-L09 and VTR-L29)
- Vendor : orange (default phone value from my carrier) -> hw (need to fit the custom APP flashed in step 2)
- Country : all (default phone value from my carrier) -> eu (need to fit the custom APP flashed in step 2)
- SIM card mode : Dual SIM (was already set to dual but forced it again, not sure it was usefull)
- ... (you'll have to guess what and why you have to guess it...)
You'll need 15 credits for DC Phoenix and 8 credits for HCU client... you can think it is expensive, but yesterday my phone was bricked, so his help and support saved my phone, and my day!
Don't ask me to upload my OEMinfo partition as I won't unlock again my bootloader (the crappy message at boot is just not for me...), I won't flash TWRP.
It is not a hidden promotion message, it is just to tell there is an alternative solution to unbrand it and add Dual SIM support.
Bye!
It's OK, I'm in no hurry. I will wait for a totally free alternative like for my ex p8 and p9 lite
bu3304 said:
It's OK, I'm in no hurry. I will wait for a totally free alternative like for my ex p8 and p9 lite
Click to expand...
Click to collapse
OEMINFO
WAS-LX1C432B102
mega.nz/#!56R1XDxT!90J3Hpii00f3IZR-6nJ8wYHS-2QMW9wjw9LyUCpMF8s[/url]
I need PRODUCT partition backup WAS-LX1
Przemoxy said:
OEMINFO
WAS-LX1C432B102
mega.nz/#!56R1XDxT!90J3Hpii00f3IZR-6nJ8wYHS-2QMW9wjw9LyUCpMF8s[/url]
Click to expand...
Click to collapse
Thank You very Much. I try today.
I can't use your file with TWRP.
I tried under TWRP to restore with the file
Don't work and brick the phone : only reboot in Erecovery Mode
Erecovery et Huawei Suite do not recognize the device
By luck device exchanged by operator Orange. I prefer to wait until the XDA community interferes with this model.
Deleted, error post.
HELP please!
HELP please!
Any one could give me a TWRP full backup (with data partition) of P10 Lite WAS-LX1AC02B113, please? My phone isn't working, I had a full backup of my device except (data partition) then restored another backup (to enable dual sim from here) and it was corrupted so! now after restoring my official backup I have 2 problems: 1 Sound isn't working. 2 Boot logo changed to "Android" not the Huawei animated video
Any help, please?
saprey said:
HELP please!
Any one could give me a TWRP full backup (with data partition) of P10 Lite WAS-LX1AC02B113, please? My phone isn't working, I had a full backup of my device except (data partition) then restored another backup (to enable dual sim from here) and it was corrupted so! now after restoring my official backup I have 2 problems: 1 Sound isn't working. 2 Boot logo changed to "Android" not the Huawei animated video
Any help, please?
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?s=&showtopic=824139&view=findpost&p=62856493
Do as I do, google translator to help.
Did you guys manage succesfully to convert to dualsim from singlesim the huawei P10 Lite?
I need it but there's no clear info.
Please help.
Originally Posted by stefanwe92
I don´t have extracted update.app because idk how to get partition table from P10 Lite (WAS-LX1A), but I have uploaded a full backup of my p10Lite from TWRP(w/o data-partition) here: twrp_backup_was-lx1a-c432-b102twrp_backup_was-lx1a-c432-b102 <-- I used highest compression level from twrp, so the download is not sooo big
Click to expand...
Click to collapse
Maybe this can help you
Edit:
On another thread somebody suggested it is Single SIM, you have to try after doing a backup of your for safety
Morphine1 said:
Did you guys manage succesfully to convert to dualsim from singlesim the huawei P10 Lite?
I need it but there's no clear info.
Please help.
Click to expand...
Click to collapse
If you want, i can help you.But you vender will be hw/ru DS
Here is the link to another OEMINFO C432, this should be Dual SIM.
Harlock1978 said:
Here is the link to another OEMINFO C432, this should be Dual SIM.
Click to expand...
Click to collapse
Thank you very much. I'm going to try.
Hello guys, I will explain my case and see how can you help me.
Model and rom: was lx1ac02b114
Carrier vodafone: single sim
Harlock1978 said:
Here is the link to another OEMINFO C432, this should be Dual SIM.
Click to expand...
Click to collapse
Modified the oeminfo backup and inserted the above provided oeminfo WAS-LX1C432B102 by @harlock1987
Restored this modded oeminfo via twrp.
Downloaded the full rom C432 and tried to install via holding three buttons but it failed at 5%
Had to unlock the bootloader again, got relocked.
Restored the first original twrp backup and now the nfc is blinking
I've read a lot googling , got the concepts, know how to do it but I have a lot of points to study and it's not clear.
Can anyone help me out? Again, was lx1ac02b114 vodafone, need working dualsim and stable system. I'm from Spain.
Please, any help is much appreciated!! Just need someone to guide me in the right direction with the right files, that's all.
I need the telephone to work, so I will do some test when I'll be in holiday. The method to debrand P10 and P10plus use a modded recovery that probably solve the error at 5%, but I don't know how to create one.
I'm wondering if extracting the different partition from update.app using update extractor and then flash them through fastboot would work.
If you tipe *#*#2846579#*#* then you find a menu with SDcard upgrade, to force the update, but on a forum about P9 they said that the 3 part that you download with firmware finder should have been so:
/dload/UPDATE.APP
/dload/dt/default/update_data_dt_default.app
/dload/hw/eu/update_data_hw_eu.app
/dload/hw/normal/update_data_hw_normal.app
Click to expand...
Click to collapse
but the data update only have a data directory and no update.app and the hw has both update.app and a data directory of 680 Mbyte full with programs.
Any suggestion?
Harlock1978 said:
I'm wondering if extracting the different partition from update.app using update extractor and then flash them through fastboot would work.
Click to expand...
Click to collapse
I've extracted each files using huawei extractor.
As my my bootloader said it was unlocked but actually was relocked, any attempt to flash system img was giving error
Took me a while to realize the phone was lying about being unlocked and thought about reunlocking it again. But was too late and had to sleep.
Gonna flash system img via fastboot command later on and report here, hopefully we will manage to do it.
So if I restore those oeminfo files C432 I should flash a C432 rom aswell, right?
Would that be enough?
now i know why everytime i manual update my p9 plus c636b103 to higher firmware is making it c900. its because my p9 plus is locked to its network carrier and the network smart is not releasing the ota for p9 plus. i have a vendor of smart country ph.,
pls bare to read as your knowledge/experience will help alot not only to me but to the future whom might get the same questions as mine. pls answer every questions./problems i have encountered thank you.
Q:#1 as i understand i think i need to do the debranding?? to unlock my p9 plus from my network, at first it made me so confused because my sim is unlocked i can use any sim. but then i realized its still locked in system updates from smart ph.
Q:#2 do i need to unlock bootloader install twrp and root the p9 plus first before contiunuing to the vdo of debranding?
Problem: #1, i dont fully understand the vdo of droidth in debranding the unit. i got lost of understanding in the changing of ro. build. id something like that. i tried to do the extracting the verlist but when i open the extracted verlist. img in notepad i only get random letters and symbols(ex. b&+g~), but in the video i should see vie/nxtc636b***. so i really got lost.
Problem: #2. i know i need the unlock code from huawei website.before i can unlock bootloader and i already get a code but the problem is i forgot to right it down as i only txted it to my number which i also use in my p9plus and i factory reset my p9 plus when i install back to c636b103 because if i dont factory reset after install b103 i got null imei, camera crashes, internal storage none. but after factory reset its ok.
so how am i gonna get a code again? is it still possible to get the code again? can someone pls put the link? thx.
thank you.
your reply will be much appreciated.
Yes, you need to debrand your phone and install the generic firmware for your region (for example, c432 firmwares for europe). In order to do this, you need unlocked bootloader and twrp. Root is optional, it depends on how you want to change the OEMinfo. For the unlock code I think you can ask it again to huawei in the same way you asked for it the First time. For problem#1, sorry but I have no idea what you are talking about because I didn't use that guide. Maybe try to root the phone and then edit the file directly on it with somethin like root explorer.
xtype23 said:
Yes, you need to debrand your phone and install the generic firmware for your region (for example, c432 firmwares for europe). In order to do this, you need unlocked bootloader and twrp. Root is optional, it depends on how you want to change the OEMinfo. For the unlock code I think you can ask it again to huawei in the same way you asked for it the First time. For problem#1, sorry but I have no idea what you are talking about because I didn't use that guide. Maybe try to root the phone and then edit the file directly on it with somethin like root explorer.
Click to expand...
Click to collapse
can i use any firmware in debranding? and should i first go back to b103? i have frimwares here b180 b190 b170 b130 b362.. all ar3 c636, what should i use? and can i do now the debranding process even if im still on c900b180?
Since you are on C900, I believe your cust is broken. Read here: https://www.google.it/amp/s/forum.xda-developers.com/p9/how-to/how-to-change-cust-c900-c432-t3392824/amp/ note: it's about p9, don't download or flash anything from there.
Now if you want you can try these steps:
1- unlock bootloader (if it's still locked)
2- install twrp
3- flash via twrp the attached file (ONLY if your phone is supposed to be L29-C636, which I believe it is)
4- install a C636 firmware with DLOAD metod
Now you should be on C636 firmware with a debranded phone.
i want to share my story, maybe it will help someone
I flashed HassanMirza01's Elite ROM using Elite TWRP and forgot to backup my partitions (very dumb move), and when i tried to return to stock using the dload method i couldn't, i even tried flashing the extracted partitions from UPDATE.APP using fastboot and it also didn't work, i was stuck because my OEMinfo partition was overwritten by the ROM so i tried to restore this Full Backup because it was for PRA-LA1C185 (same as my device), it worked but it caused me problems, i couldn't make calls and couldn't use the camera, and my boot screen changed from HUAWEI to HONOR, it turned out that GR3 2017 and Honor 8lite are both PRA-LA1C185 but the firmwares are different, so i kept looking for an OEMinfo backup for my GR3 so i can restore it and return to stock using eRecovery and i found this Thread that contains OEMinfo backups for LX1C432 (P8lite 2017) and LA1C185 (honor 8lite) but nothing for GR3 2017 (that is also LA1C185), soo i tried flashing honor8lite OEMinfo using Elite TWRP then i tried to return to stock using eRecovery but it gave me an error, then i tried OEMinfo for LX1 and flashed stock recovery over TWRP, then went into eRecovery and it worked, it started downloading stock PRA-LX1C432B160 and after booting everything worked great and i even recieved the PRA-LX1C432B194 update immediately, and now my phone says it is P8 lite 2017 (instead of GR3 2017) in Settings>About
What i learned :
1- DLOAD METHOD NEVER WORKS
2- ALWAYS BACKUP YOUR OEMinfo PARTITION SO YOU CAN RETURN TO STOCK USING eRECOVERY
3- ALWAYS BACKUP YOUR BOOTLOADER UNLOCK CODE BECAUSE WHEN YOU FLASH OEMinfo PARTITION THE PHONE WILL LOCK AND YOU CAN'T EVEN BOOT TO GET YOUR SERIAL NUMBER and EMEI TO UNLOCK IT
If you are in the same situation as me, follow this Tutorial made by @Youssef Reda who had the same problem with the same phone.
And if nothing works, use DC Phoenix software (not free) to force flash the stock UPDATE.APP, it works even if the bootloader is locked and FRP is locked.
Happy to help :highfive:
dz3ro said:
i want to share my story, maybe it will help someone
I flashed HassanMirza01's Elite ROM using Elite TWRP and forgot to backup my partitions (very dumb move), and when i tried to return to stock using the dload method i couldn't, i even tried flashing the extracted partitions from UPDATE.APP using fastboot and it also didn't work, i was stuck because my OEMinfo partition was overwritten by the ROM so i tried to restore this Full Backup because it was for PRA-LA1C185 (same as my device), it worked but it caused me problems, i couldn't make calls and couldn't use the camera, and my boot screen changed from HUAWEI to HONOR, it turned out that GR3 2017 and Honor 8lite are both PRA-LA1C185 but the firmwares are different, so i kept looking for an OEMinfo backup for my GR3 so i can restore it and return to stock using eRecovery and i found this Thread that contains OEMinfo backups for LX1C432 (P8lite 2017) and LA1C185 (honor 8lite) but nothing for GR3 2017 (that is also LA1C185), soo i tried flashing honor8lite OEMinfo using Elite TWRP then i tried to return to stock using eRecovery but it gave me an error, then i tried OEMinfo for LX1 and flashed stock recovery over TWRP, then went into eRecovery and it worked, it started downloading stock PRA-LX1C432B160 and after booting everything worked great and i even recieved the PRA-LX1C432B194 update immediately, and now my phone says it is P8 lite 2017 (instead of GR3 2017) in Settings>About
What i learned :
1- DLOAD METHOD NEVER WORKS
2- ALWAYS BACKUP YOUR OEMinfo PARTITION SO YOU CAN RETURN TO STOCK USING eRECOVERY
3- ALWAYS BACKUP YOUR BOOTLOADER UNLOCK CODE BECAUSE WHEN YOU FLASH OEMinfo PARTITION THE PHONE WILL LOCK AND YOU CAN'T EVEN BOOT TO GET YOUR SERIAL NUMBER and EMEI TO UNLOCK IT
If you are in the same situation as me, follow this Tutorial made by @Youssef Reda who had the same problem with the same phone.
And if nothing works, use DC Phoenix software (not free) to force flash the stock UPDATE.APP, it works even if the bootloader is locked and FRP is locked.
Click to expand...
Click to collapse
thanx For Your Help. So like to know if you have changed your model GR3 2017 Pra-la1 to européen P8 lite 2017 Pra-lx1 ??? it's work for you without problem !!!
I asked you because i flashed Pra-lx1 and it installed with problem for me i don't have many system app and the software update.
jalel25 said:
thanx For Your Help. So like to know if you have changed your model GR3 2017 Pra-la1 to européen P8 lite 2017 Pra-lx1 ??? it's work for you without problem !!!
I asked you because i flashed Pra-lx1 and it installed with problem for me i don't have many system app and the software update.
Click to expand...
Click to collapse
It works perfectly with 0 problems, how did u flash ?
dz3ro said:
It works perfectly with 0 problems, how did u flash ?
Click to expand...
Click to collapse
I know it's worked for you because the firmware istalled with Erecovery it's legal for Huawei server. but i installed this pra-lx1 with twrp i flashed him with many problem. i know your experience is the right way. but i'm surprised how the européen version pra-lx1 worked in middle east version pra-la1 i have the some one like you GR3 2017 with pra-lac185b188 software.
i like to change my GR3 2017 in the européen version but my smartphone is out of granti now and i'm affraid lol. if you can help me to know more fir that and thnx a lot ? .
im jalel from Tunisia
jalel25 said:
I know it's worked for you because the firmware istalled with Erecovery it's legal for Huawei server. but i installed this pra-lx1 with twrp i flashed him with many problem. i know your experience is the right way. but i'm surprised how the européen version pra-lx1 worked in middle east version pra-la1 i have the some one like you GR3 2017 with pra-lac185b188 software.
i like to change my GR3 2017 in the européen version but my smartphone is out of granti now and i'm affraid lol. if you can help me to know more fir that and thnx a lot ? .
im jalel from Tunisia
Click to expand...
Click to collapse
What happens when you go into eRecovery ? Does it show error ?
dz3ro said:
What happens when you go into eRecovery ? Does it show error ?
Click to expand...
Click to collapse
yes show error with my software GR3 2017 Pra-la1
I asked you if eRecovery work with pra-lx1 oeminfo ?
jalel25 said:
yes show error with my software GR3 2017 Pra-la1
I asked you if eRecovery work with pra-lx1 oeminfo ?
Click to expand...
Click to collapse
Yes it works, but back up your original OEMinfo, and then restore pra-lx1 OEMinfo from the link in OP
Ps: if you can, upload your backup of OEMinfo so we can all use it to return to GR3 2017 stock
dz3ro said:
Yes it works, but back up your original OEMinfo, and then restore pra-lx1 OEMinfo from the link in OP
Ps: if you can, upload your backup of OEMinfo so we can all use it to return to GR3 2017 stock
Click to expand...
Click to collapse
Now we can Restore with européen pra-lx1 right ?
but pra-la1 OEMinfo we can Restore software with him !!! i asked you because when we are in the default software i tried to restore the phone but he said error ?
why ?
jalel25 said:
Now we can Restore with européen pra-lx1 right ?
but pra-la1 OEMinfo we can Restore software with him !!! i asked you because when we are in the default software i tried to restore the phone but he said error ?
why ?
Click to expand...
Click to collapse
I don't know about original pra-la1 eRecovery because i never tried it, i tried honor 8lite OEMinfo and it gave me the same error.
But pra-lx1 I'm sure it works because i tried it
It is weird that we can't use our original OEMinfo to restore but we can use European OEMinfo
dz3ro said:
I don't know about original pra-la1 eRecovery because i never tried it, i tried honor 8lite OEMinfo and it gave me the same error.
But pra-lx1 I'm sure it works because i tried it
It is weird that we can't use our original OEMinfo to restore but we can use European OEMinfo
Click to expand...
Click to collapse
yes that's right the original stock doesn't work for eRecovery.
another question man. if i flash Elite Twrp i can backup my phone. and he can work without problem if i restore it ?
dz3ro said:
i want to share my story, maybe it will help someone
I flashed HassanMirza01's Elite ROM using Elite TWRP and forgot to backup my partitions (very dumb move), and when i tried to return to stock using the dload method i couldn't, i even tried flashing the extracted partitions from UPDATE.APP using fastboot and it also didn't work, i was stuck because my OEMinfo partition was overwritten by the ROM so i tried to restore this Full Backup because it was for PRA-LA1C185 (same as my device), it worked but it caused me problems, i couldn't make calls and couldn't use the camera, and my boot screen changed from HUAWEI to HONOR, it turned out that GR3 2017 and Honor 8lite are both PRA-LA1C185 but the firmwares are different, so i kept looking for an OEMinfo backup for my GR3 so i can restore it and return to stock using eRecovery and i found this Thread that contains OEMinfo backups for LX1C432 (P8lite 2017) and LA1C185 (honor 8lite) but nothing for GR3 2017 (that is also LA1C185), soo i tried flashing honor8lite OEMinfo using Elite TWRP then i tried to return to stock using eRecovery but it gave me an error, then i tried OEMinfo for LX1 and flashed stock recovery over TWRP, then went into eRecovery and it worked, it started downloading stock PRA-LX1C432B160 and after booting everything worked great and i even recieved the PRA-LX1C432B194 update immediately, and now my phone says it is P8 lite 2017 (instead of GR3 2017) in Settings>About
What i learned :
1- DLOAD METHOD NEVER WORKS
2- ALWAYS BACKUP YOUR OEMinfo PARTITION SO YOU CAN RETURN TO STOCK USING eRECOVERY
3- ALWAYS BACKUP YOUR BOOTLOADER UNLOCK CODE BECAUSE WHEN YOU FLASH OEMinfo PARTITION THE PHONE WILL LOCK AND YOU CAN'T EVEN BOOT TO GET YOUR SERIAL NUMBER and EMEI TO UNLOCK IT
If you are in the same situation as me, follow this Tutorial made by @Youssef Reda who had the same problem with the same phone.
And if nothing works, use DC Phoenix software (not free) to force flash the stock UPDATE.APP, it works even if the bootloader is locked and FRP is locked.
Click to expand...
Click to collapse
thank you very very much It's work for me too
i Rebranding my GR3 2017 north africa model to P8 LITE 2017 Européen Model it's amazing Software it's very faster and smoother model. the best model is the européen and it's a best solution to Restore The phone thank's for your best idea it's work without problem ???
jalel25 said:
thank you very very much It's work for me too
i Rebranding my GR3 2017 north africa model to P8 LITE 2017 Européen Model it's amazing Software it's very faster and smoother model. the best model is the européen and it's a best solution to Restore The phone thank's for your best idea it's work without problem ???
Click to expand...
Click to collapse
You're welcome mate
dz3ro said:
You're welcome mate
Click to expand...
Click to collapse
hi man how are you am filling good with europeen model very fast and stable but
this software work with one sim card hehe . i have many software update like B169 and B191 wich one
is better for device ????
jalel25 said:
hi man how are you am filling good with europeen model very fast and stable but
this software work with one sim card hehe . i have many software update like B169 and B191 wich one
is better for device ????
Click to expand...
Click to collapse
Really ???
Mine is dual sim, and i am on B194
Go to settings>update>click on three dots> download latest full package
dz3ro said:
Really ???
Mine is dual sim, and i am on B194
Go to settings>update>click on three dots> download latest full package
Click to expand...
Click to collapse
oh my god i flashed oem info by haky86 it.s for one sim mobile ???
plz tell me your oem info is for dual sim ?
how i can get ?
about software update i get B193 FULL its for one sim .
jalel25 said:
oh my god i flashed oem info by haky86 it.s for one sim mobile ???
plz tell me your oem info is for dual sim ?
how i can get ?
about software update i get B193 FULL its for one sim .
Click to expand...
Click to collapse
You should have flashed OEMinfo that i linked in first post, so u get the same firmware as me
dz3ro said:
You should have flashed OEMinfo that i linked in first post, so u get the same firmware as me
Click to expand...
Click to collapse
another question plz . if i flash OEMinfo for my PRA-LA1 and show me error ( didnt work ) .
how i can reflash another OEMinfo for example PRA-LX1 because the bootloader is loocked and the device dont boot and the twrp didnt work
that problem we can show in boot right .
jalel25 said:
another question plz . if i flash OEMinfo for my PRA-LA1 and show me error ( didnt work ) .
how i can reflash another OEMinfo for example PRA-LX1 because the bootloader is loocked and the device dont boot and the twrp didnt work
that problem we can show in boot right .
Click to expand...
Click to collapse
Unlock your bootloader using your unlock code and try again
dz3ro said:
Unlock your bootloader using your unlock code and try again
Click to expand...
Click to collapse
its worked for you when you unlock the bootloader again ???
you say tried to flash OEMinfo of PRA-LA1 and show error right here the bootloader is locked
then you unlock again and flash twrp and flash OEMinfo of PRA-LX1 this is the method right :good:
Hey everyone,
So, a couple months back I rebranded my EVA-L09 to a VIE-AL10 through the rebrand tool.
A couple weeks back I wanted to revert back to EVA-L09 to go back to Magic Rainbow v4 or v3.
I failed in trying to rebrand it back and ended up where I am now, I have TWRP installed, I can do the dload methods to install whatever, but I can't for the life of me get any ROM or firmware to boot. It either doesn't go past the "Your device is not trusted" screen or it hangs at the boot animation.
Extra notes: Yes I was on Oreo when I tried to revert, I am currently not on Oreo as I tried to flash a Nougat VIE-AL10 firmware to attempt to get the phone to at least boot to a usable state for the time being, however now it's stuck on a boot animation.
Would appreciate any help,
Cheers.
Update:
I tried to follow this: https://forum.xda-developers.com/showpost.php?p=77161313&postcount=2
But as mentioned above the phone hangs on "Your device is booting now..." after HWOTA copies the Nougat firmware files.
gamr13 said:
Hey everyone,
So, a couple months back I rebranded my EVA-L09 to a VIE-AL10 through the rebrand tool.
A couple weeks back I wanted to revert back to EVA-L09 to go back to Magic Rainbow v4 or v3.
I failed in trying to rebrand it back and ended up where I am now, I have TWRP installed, I can do the dload methods to install whatever, but I can't for the life of me get any ROM or firmware to boot. It either doesn't go past the "Your device is not trusted" screen or it hangs at the boot animation.
Extra notes: Yes I was on Oreo when I tried to revert, I am currently not on Oreo as I tried to flash a Nougat VIE-AL10 firmware to attempt to get the phone to at least boot to a usable state for the time being, however now it's stuck on a boot animation.
Would appreciate any help,
Cheers.
Click to expand...
Click to collapse
EVA is P9, VIE is P9 Plus
Don't mix firmwares, you wll (no wonder if you really mixed), brick the phone
One procedure is for P9 = EVA (and this is P9 portal here):
rebranding from EVA L09/L19 to EVA AL00c00b535 and back
https://forum.xda-developers.com/p9-plus/development/rebrand-update-tool-hwota7-p9-plus-vie-t3843930
The other is for P9 Plus = VIE (different phone, eg bigger display)
rebranding from VIE L09/L29 to VIE AL00c00b535 and back
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
zgfg said:
EVA is P9, VIE is P9 Plus
Don't mix firmwares, you wll (no wonder if you really mixed), brick the phone
One procedure is for P9 = EVA (and this is P9 portal here):
rebranding from EVA L09/L19 to EVA AL00c00b535 and back
https://forum.xda-developers.com/p9-plus/development/rebrand-update-tool-hwota7-p9-plus-vie-t3843930
The other is for P9 Plus = VIE (different phone, eg bigger display)
rebranding from VIE L09/L29 to VIE AL00c00b535 and back
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
Click to expand...
Click to collapse
I was reading through the first link there, as mentioned in the second post I made in here. After following the steps one-by-one the device is stuck at "Your device is booting now..."
gamr13 said:
I was reading through the first link there, as mentioned in the second post I made in here. After following the steps one-by-one the device is stuck at "Your device is booting now..."
Click to expand...
Click to collapse
Be more specific, confirm
- Your phone is P9 or P9 Plus?
If P9, was it L09 (single SIM) or L19 (dual SIM)
- On exactly which Chinese Oreo have you been (cannot be VIE, you must well know what you exactly had and what you were flashing), was it EVA -AL00c00 or what and which build number bXX it was
- Did you go to some Open Kirin/AOSP custom ROM or stayed on that stock Chinese ROM?
You first had to come back to Chinese stock Oreo, not downgrading to Nougat directly from Open Kirin / AOSP
- Downgrading consists of several steps, HiSuite to go to Chinese Nougat and then HWOTA7 to rebrand to eg c432 Nougat.
Up to each step did you exactly do when you got stuck in Booting?
-More precisely, if you downgraded by HiSuite to AL10c00 Nougat, did it boot successfully (or were you here stuck at booting)?
If that step was successful, which (full build name and number) you were flashing by HWOTA7 to rebrand to from the Chinese Nougat?
-Have you tried to switch off and boot again?
Have you tried booting to Recovery and do Factory reset and Wipe Cache and Internal mem and then tried to teboot?
zgfg said:
Be more specific, confirm
- Your phone is P9 or P9 Plus?
If P9, was it L09 (single SIM) or L19 (dual SIM)
- On exactly which Chinese Oreo have you been (cannot be VIE, you must well know what you exactly had and what you were flashing), was it EVA -AL00c00 or what and which build number bXX it was
- Did you go to some Open Kirin/AOSP custom ROM or stayed on that stock Chinese ROM?
You first had to come back to Chinese stock Oreo, not downgrading to Nougat directly from Open Kirin / AOSP
- Downgrading consists of several steps, HiSuite to go to Chinese Nougat and then HWOTA7 to rebrand to eg c432 Nougat.
Up to each step did you exactly do when you got stuck in Booting?
-More precisely, if you downgraded by HiSuite to AL10c00 Nougat, did it boot successfully (or were you here stuck at booting)?
If that step was successful, which (full build name and number) you were flashing by HWOTA7 to rebrand to from the Chinese Nougat?
-Have you tried to switch off and boot again?
Have you tried booting to Recovery and do Factory reset and Wipe Cache and Internal mem and then tried to teboot?
Click to expand...
Click to collapse
Sure,
EVA-L09 is a regular P9. Not a P9 Plus.
I never honestly checked which Oreo firmware I was on. I downloaded the VIE-AL10C00B535 (8.0.0.535) firmware and used that.
Yes, at one point I did go to the OpenKirin AOSP ROMs. However, I was able to do the volume + & - + Power to return to Nougat and then re-flash Oreo. After this I stayed on the EMUI 8.0 firmware.
I did not use HiSuite as it never worked for me. It would always just tell me to go to a service center.
I did not use HiSuite. When I returned to EMUI 5.0.1 from eRecovery (?) Restoring over WiFi on the actual phone it booted fine and I then upgraded again to the Oreo firmware.
Yes, I have tried rebooting.
Yes, I have tried a factory reset.
When I tried to revert from a VIE-AL10 rebrand, my phone ended up getting stuck between an AL10 and an EVA-L09. Meaning that I can use the EVA-L09 TWRP but not an EVA-L09 compatible firmware or ROM. I can only boot AL10 firmwares or ROMs however they hang at the boot animation.
gamr13 said:
Sure,
EVA-L09 is a regular P9. Not a P9 Plus.
I never honestly checked which Oreo firmware I was on. I downloaded the VIE-AL10C00B535 (8.0.0.535) firmware and used that.
Yes, at one point I did go to the OpenKirin AOSP ROMs. However, I was able to do the volume + & - + Power to return to Nougat and then re-flash Oreo. After this I stayed on the EMUI 8.0 firmware.
I did not use HiSuite as it never worked for me. It would always just tell me to go to a service center.
I did not use HiSuite. When I returned to EMUI 5.0.1 from eRecovery (?) Restoring over WiFi on the actual phone it booted fine and I then upgraded again to the Oreo firmware.
Yes, I have tried rebooting.
Yes, I have tried a factory reset.
When I tried to revert from a VIE-AL10 rebrand, my phone ended up getting stuck between an AL10 and an EVA-L09. Meaning that I can use the EVA-L09 TWRP but not an EVA-L09 compatible firmware or ROM. I can only boot AL10 firmwares or ROMs however they hang at the boot animation.
Click to expand...
Click to collapse
>> I downloaded the VIE-AL10C00B535 (8.0.0.535) firmware and used that.
In yout previous post:
>> I tried to follow this: https://forum.xda-developers.com/sho...13&postcount=2
Guide you cited is for rebranding European P9 EVA to Chinese P9 EVA-AL10c00b535 - see attached screenshots from the guide, observe it is everywhere EVA-AL10, not VIE-AL10
Once again, it must be EVA before rebranding and EVA after rebranding.
VIE is different phone (different hardware - bigger display), P9 Plus.
If you didn't care about difference between EVA and VIE, maybe you really downloaded and flashed AL10c00b535 for VIE (P9 Plus) to your EVA (P9)
----
>> Yes, at one point I did go to the OpenKirin AOSP ROMs. However, I was able to do the volume + & - + Power to return to Nougat
This is procedure to boot to Recovery (eRecovery if charging by USB), not to Nougat
----
Details are important, not just when writing posts but really when reading guides and flashing, otherwise bad things can happen ;(
So please, consider again, did you really flash VIE AL10 to your P9 (5,2 inch display)?
(Maybe it worked somehow for AL10b535 because packages for Chinese P9 = EVA and P9 Plus = VIE are similar, but now when returning to Nougat it stays on VIE and doesn't boot)
zgfg said:
>> I downloaded the VIE-AL10C00B535 (8.0.0.535) firmware and used that.
In yout previous post:
>> I tried to follow this: https://forum.xda-developers.com/sho...13&postcount=2
Guide you cited is for rebranding European P9 EVA to Chinese P9 EVA-AL10c00b535 - see attached screenshots from the guide, observe it is everywhere EVA-AL10, not VIE-AL10
Once again, it must be EVA before rebranding and EVA after rebranding.
VIE is different phone (different hardware - bigger display), P9 Plus.
If you didn't care about difference between EVA and VIE, maybe you really downloaded and flashed AL10c00b535 for VIE (P9 Plus) to your EVA (P9)
----
>> Yes, at one point I did go to the OpenKirin AOSP ROMs. However, I was able to do the volume + & - + Power to return to Nougat
This is procedure to boot to Recovery (eRecovery if charging by USB), not to Nougat
----
Details are important, not just when writing posts but really when reading guides and flashing, otherwise bad things can happen ;(
So please, consider again, did you really flash VIE AL10 to your P9 (5,2 inch display)?
(Maybe it worked somehow for AL10b535 because packages for Chinese P9 = EVA and P9 Plus = VIE are similar, but now when returning to Nougat it stays on VIE and doesn't boot)
Click to expand...
Click to collapse
I honestly can't remember how I did it now, it's been a while, but it did go through successfully, and it was working fine after applying the patch.
But yeah, as of now all I can use is fastboot and TWRP. That's all. I've tried flashing EVA-L09 firmware, it doesn't boot. I've flashed AL10 firmware and it gets to a boot animation, but no further than that.
gamr13 said:
I honestly can't remember how I did it now, it's been a while, but it did go through successfully, and it was working fine after applying the patch.
But yeah, as of now all I can use is fastboot and TWRP. That's all. I've tried flashing EVA-L09 firmware, it doesn't boot. I've flashed AL10 firmware and it gets to a boot animation, but no further than that.
Click to expand...
Click to collapse
Boot to Fastboot:
- connect by USB to PC and boot by: press and keep pressing Vol-, then Pow
Ececute from the PC side and copy/paste back your results (is Bootloader still unlocked, what the phone thinks it is current model, cust, build number)
Code:
fastboot oem get-bootinfo
PAUSE
fastboot oem get-product-model
PAUSE
fastboot getvar vendorcountry
PAUSE
fastboot oem get-build-number
PAUSE
fastboot oem oeminforead-SYSTEM_VERSION
@gamr13 Please enter the shown commands by @zgfg in Fastboot mode and tell us the result.
There is not much hope to restore your device after all that you have done wrong → but if you try, what we recommend, we may can recover it.
I can confirm: EVA-L09 is not the same device as VIE-L09 → you can not rebrand EVA-L09 to VIE-AL10, and it is not possible to rebrand VIE-L09 to EVA-AL10 - That causes a lot of problems and you should not be surprised if your device does not boot again.
If your original device was an EVA-L09 you can rebrand to all EVA models, but not to VIE models - That's why there are two threads - one for P9 and the other for P9 Plus.
If you flash oeminfos and related Firmware → it must match with your device!
But if you think, you can flash whatever you like, then your device get "bricked". And here we are now.
BTW: Rebranding back to your originally model can not be done with HWOTA7 - as long the device is on Android 8 ! First a downgrade from Chinese Brand Oreo to Chinese Brand Nougat is required → after this step it is possible to use hwota7 again to rebrand. I have written all the steps in separate Posts after the main Thread.
First we need this Fastboot mode information, then we can see in which status, on which firmware and which oeminfo your device is currently.
Then it's time to flash exactly this firmware with the correct method → for this step, wait for instructions from us.
Only when the device works again, it is possible to downgrade with the correct method and return to the original model, or whatever.
As long as the device is in a "brick", nothing works, since the "brick" must first be resolved.
If it is a "semi brick", a "hard brick" can happen as well, after that the device will be dead and without any function → It teaches you to be careful with flashing and get all the information before you flash anything.
We've also had other issues caused by users doing wrong actions - not knowing what they're actually doing. But both cases were solved successfully - which was not easy:https://forum.xda-developers.com/p9/help/huawei-p9-potentally-bricked-t3841197/
Hey guys,
I've attached a screenshot below which contains all the commands and what I got from them below.
Note about the get-build-number, that was the most recent firmware I tried to flash out of literally 10 other firmwares I tried.
I appreciate everything you guys are trying to do to help me fix this problem. I'm currently trying to survive with a Galaxy S3 Mini, and it's not going well in the slightest.
Cheers.
EDIT: Just as a note, which may be obvious from the screenshots to you or not, the partitions are like Nougat, meaning I do not flash the recovery to ramdisk.
gamr13 said:
Hey guys,
I've attached a screenshot below which contains all the commands and what I got from them below.
Note about the get-build-number, that was the most recent firmware I tried to flash out of literally 10 other firmwares I tried.
I appreciate everything you guys are trying to do to help me fix this problem. I'm currently trying to survive with a Galaxy S3 Mini, and it's not going well in the slightest.
Cheers.
EDIT: Just as a note, which may be obvious from the screenshots to you or not, the partitions are like Nougat, meaning I do not flash the recovery to ramdisk.
Click to expand...
Click to collapse
Looks promissing
It says EVA, not VIE - ok
Somehow you are on c900b182 which means MM (not Nougat) - did you rollback to MM?
In Fastboot screen, does it show in red, at the bottom, both Phone (=Bootloader) and FRP Unlocked?
zgfg said:
Looks promissing
It says EVA, not VIE - ok
Somehow you are on c900b182 which means MM (not Nougat) - did you rollback to MM?
In Fastboot screen, does it show in red, at the bottom, both Phone (=Bootloader) and FRP Unlocked?
Click to expand...
Click to collapse
Yes, I tried to flash MM as well.
In fastboot mode it only shows PHONE Unlocked.
gamr13 said:
Yes, I tried to flash MM as well.
In fastboot mode it only shows PHONE Unlocked.
Click to expand...
Click to collapse
Why didn't you wait, you attempted to rollback?
Now Bootloader is unlocked but FRP is locked (and you cannot boot to System to unlock OEM=FRP)
It can block you fir further flashing ;-(
Do you want to go to c432, is it L09 (Single SIM) or L19 (Dual SIM)?
zgfg said:
Why didn't you wait, you attempted to rollback?
Now Bootloader is unlocked but FRP is locked (and you cannot boot to System to unlock OEM=FRP)
It can block you fir further flashing ;-(
Do you want to go to c432, is it L09 (Single SIM) or L19 (Dual SIM)?
Click to expand...
Click to collapse
This was around a week ago, and the FRP lock thing went away when I did the rebrand - as it's supposed to
But yeah, I can't boot the system.
It's the single SIM EVA-L09.
gamr13 said:
This was around a week ago, and the FRP lock thing went away when I did the rebrand - as it's supposed to
But yeah, I can't boot the system.
It's the single SIM EVA-L09.
Click to expand...
Click to collapse
Procedure for rebranding from c900b182 to c432 is here:
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
Once on c432b182 you should receive OTAs to get back to Nougat.
However, procedure requires flashing OEMIFO, which most likely will be forbidden to you because your FRP is locked and you cannot boot to Systen to unlock OEM.
Which means serious brick
In that case you can try with DC Unlock (sorry, I don't know a better method), it will cost you 15 EUR (probably) and you must ask them for on-line help if needed
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
zgfg said:
Procedure for rebranding from c900b182 to c432 is here:
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
Once on c432b182 you should receive OTAs to get back to Nougat.
However, procedure requires flashing OEMIFO, which most likely will be forbidden to you because your FRP is locked and you cannot boot to Systen to unlock OEM.
Which means serious brick
In that case you can try with DC Unlock (sorry, I don't know a better method), it will cost you 15 EUR (probably) and you must ask them for on-line help if needed
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Click to expand...
Click to collapse
I'll follow the first link carefully and report back, thanks!
gamr13 said:
I'll follow the first link carefully and report back, thanks!
Click to expand...
Click to collapse
Try but you most likely you will need second link
Here was another user who also had to use DC Unlocker, take a look into the thread (posts #6-#11), in the last post he described how it was resolved for him by DC Unlocker
https://forum.xda-developers.com/p9/help/bought-phone-ebay-registration-wizard-t3840803
zgfg said:
Try but you most likely you will need second link
Here was another user who also had to use DC Unlocker, take a look into the thread (posts #6-#11), in the last post he described how it was resolved for him by DC Unlocker
https://forum.xda-developers.com/p9/help/bought-phone-ebay-registration-wizard-t3840803
Click to expand...
Click to collapse
I used DC Unlocker before to get my bootloader unlock key.
gamr13 said:
I used DC Unlocker before to get my bootloader unlock key.
Click to expand...
Click to collapse
I was not writing you about getting the code but to use DC Unlocker to unlock FRP ( carefully read the story, posts #6 till #11, I gave you in the previous post)
Because their tool can unlock both FRP and Bootloader, but it costs more than just getting the Bootloader code
Personally I didn't use their tool (never bricked the phone or so to need it), and cannot help you about the tool further