Related
Hi,
Well my device which is S5 mini g800f working fine, since I have changed the firmware which was old like build on july so I tried to installed latest, but now there is emergency call showing, also I have tried manually and automatically to register on the network but it says unable to register to the (---network). I did it coz my device was not showing LTE network. However my sim supports the 4g and was working on S4 i9505. I have searched on Google and look out many threads on XDA but no success until now.
The biggest mistake was I didn't looked the firmware which was already there and was running with 3g support. I have tried these EUR-G800FXXU1ANL1-20141226162921, SER-G800FXXU1ANG1-20140709112536, MAT-G800FXXU1ANI3-20141218172328. Then I have installed Custom Lollipop but no success was there too.
So now any pro's here who can understand my problem ? My imei is showing, is there any procedure where I can put the imei and it will let me know what was installed on stock :crying:
Sorry for being noobish..
Please any buddy give me suggestions that what should I do ? Or should I look in the specific section of XDA forums ?
[email protected] said:
Hi,.....
So now any pro's here who can understand my problem ? My imei is showing, is there any procedure where I can put the imei and it will let me know what was installed on stock :crying:
Sorry for being noobish..
Click to expand...
Click to collapse
What do you mean by this? IMEI showing or Not?
02xda2 said:
What do you mean by this? IMEI showing or Not?
Click to expand...
Click to collapse
Its is mentioned mate what I have written, I said my imei is showing that by dialing *#06# I can see it, because there is a problem where the efs folder corrupted or gone you cant see imei or imei appears to be in these digits 00000 especially by installing custom roms. Anyways my only motive is that I know the imei and how ever I can see it too, so is there any procedure where I can put the imei to the website and see what was installed on stock. Because I dont have the box so I dont know which firmware was there when I installed another rom to get LTE, because it was working properly as I said in my earlier post.
Problem is due the baseband I am pretty sure which is not matching, this is the reason because I cant connect to the network---error msg (Unable to connect).
[email protected] said:
Hi,
Well my device which is S5 mini g800f working fine, since I have changed the firmware which was old like build on july so I tried to installed latest, but now there is emergency call showing, also I have tried manually and automatically to register on the network but it says unable to register to the (---network). I did it coz my device was not showing LTE network. However my sim supports the 4g and was working on S4 i9505. I have searched on Google and look out many threads on XDA but no success until now.
The biggest mistake was I didn't looked the firmware which was already there and was running with 3g support. I have tried these EUR-G800FXXU1ANL1-20141226162921, SER-G800FXXU1ANG1-20140709112536, MAT-G800FXXU1ANI3-20141218172328. Then I have installed Custom Lollipop but no success was there too.
So now any pro's here who can understand my problem ? My imei is showing, is there any procedure where I can put the imei and it will let me know what was installed on stock :crying:
Sorry for being noobish..
Click to expand...
Click to collapse
The baseband firmware is included in the firmware packages that are available on sammobile (.tar.md5 files). If you flash the firmware package with Odin, also the baseband firmware (contained in modem.bin) will be flashed.
If you have problems with a newly flashed stock firmware that were not present with the original firmware it might be because of one of the following reasons:
You flashed the wrong firmware. I don't think that the version name of the original firmware is stored somewhere. Instead check sammobile for the correct one: select the correct phone model and your country. EUR, SER (for Russia), MAT are country codes, choose the correct one for your country, the search function on sammobile will help you with that. You can also try Kies for restoring the firmware. Maybe that is able to determine the correct firmware according to the IMEI or some other information stored on the phone.
Maybe your EFS partition was changed and corrupted. The EFS partition is the partition that contains the IMEI and other information like calibration files that are specific for your device. If any of the files in this partition is damaged, the phone might not behave correctly. If you flash another firmware the EFS partition normally is not changed.
Your hardware is defect.
I guess that you simply flashed the wrong ROM. Otherwise the problem will be hard to fix.
[email protected] said:
...... where I can put the imei to the website and see what was installed on stock. ..........
Click to expand...
Click to collapse
Probably THIS is what you want, hope so
02xda2 said:
Probably THIS is what you want, hope so
Click to expand...
Click to collapse
Thanks but for me its not working... its showing device Nokia 6303i
Recently tried to install Android Pay onto the P9 hoping to make use of the contactless payments made via NFC. After installing the android pay app successfully when going to add a card I get the following message' Android pay can't be used- google is unable to verify that your device or the software running on it is android compatible' I have made no changes to the software, not flashed any rom etc. Has anyone else encountered the same problem, is there something I am doing wrong? I'd assume the P9 would support this feature in the UK.
Mine works fine in uk running b166.
Does the b number relate to build number? If so mine shows as B131
Salty1863 said:
Recently tried to install Android Pay onto the P9 hoping to make use of the contactless payments made via NFC. After installing the android pay app successfully when going to add a card I get the following message' Android pay can't be used- google is unable to verify that your device or the software running on it is android compatible' I have made no changes to the software, not flashed any rom etc. Has anyone else encountered the same problem, is there something I am doing wrong? I'd assume the P9 would support this feature in the UK.
Click to expand...
Click to collapse
Hi mate,
Same issue here. Just got my p9 yesterday second hand and it says the same thing about not being able to verify the device.
Is it safe to assume previous owner rooted?
Salty1863 said:
Does the b number relate to build number? If so mine shows as B131
Click to expand...
Click to collapse
Yes b number is build number. The latest in Europe is 166/170 .
xodeus said:
Yes b number is build number. The latest in Europe is 166/170 .
Click to expand...
Click to collapse
I'm assuming I should have received some sort of OTA update by now then? Recently purchased the phone new from EE
sstanton86 said:
Hi mate,
Same issue here. Just got my p9 yesterday second hand and it says the same thing about not being able to verify the device.
Is it safe to assume previous owner rooted?
Click to expand...
Click to collapse
That could be one of the reasons but then it could not. I purchased mine brand new from EE but unfortunately experiencing the same problem. Seems like I am behind most on some sort of software update
Made a thread about this a week or so ago. Bought a P9 locked to Vodafone and unlocked it. Still had a Vodafone splash screen so flashed the unbranded firmware.
The advice was that the OEM info doesn't match what Google requires, hence needed fixing. I'm away on business at present so can't test the fix, but check my thread and test it!
Sent from my EVA-L09 using Tapatalk
sstanton86 said:
Hi mate,
Same issue here. Just got my p9 yesterday second hand and it says the same thing about not being able to verify the device.
Is it safe to assume previous owner rooted?
Click to expand...
Click to collapse
@Salty1863
I got mine brand new from EE. Build number C440B138
Just tried the Android Pay app and it worked fine. Let me add a card. I do know unlocking bootloader / rooting does intentionally stop the app from working. It's for security. But your phone should not have come from EE in that state brand new.
I think this comes from flashing the C900 variant. You need to change the country code to 432 and then flash B166
Try here for the guide:
http://forum.xda-developers.com/p9/how-to/how-to-change-cust-c900-c432-t3392824
Hi,
Not sure if this address your problem as I cannot remember the exact error message I received but I've been using Android Pay from day 2. On day 1 I couldn't add my card and it kept failing for no reason but I realised this card was already on my Google account.
I can't remember if I added the card via the pay Chrome page or deleted the card from my account and started again but it was one of those two and been working fine ever since. Have even factory reset the phone and reinstalled the app without a hitch.
Like I said - it could help or I could be Barking up the wrong tree.
T
I've had a look around on the net, and other users are suggesting the problem lies with the screen resolution of 480dpi, and that it's too high for the app to recognise it as "official" Android.
Is there a way of changing the dpi of your handset WITHOUT root?
I'm having the same trouble with Android Pay.
Get the message that Google cannot verify my handset or software is Android compatible, when I try to add a card.
Never unlocked the bootloader, or rooted.
Very frustrating
This could be a long shot but I can see that you're from sheffield warface so I may have an odd solution. My contactless wouldn't work anywhere until I paid for a drink in the bar on West Street called Cavendish and ever since then it has been absolutely fine although this was after removing the card and entering the details again.
willhumph said:
This could be a long shot but I can see that you're from sheffield warface so I may have an odd solution. My contactless wouldn't work anywhere until I paid for a drink in the bar on West Street called Cavendish and ever since then it has been absolutely fine although this was after removing the card and entering the details again.
Click to expand...
Click to collapse
It won't even let me add a card
I just got my p9 yesterday and it's taken card details fine. The security test app (can't remember name) passes. Now I just have to try it in a shop
My P9 fails the Google safety net test.
I did try the nougat beta, and have come back down to MM.
I didn't root or unlock bootloader though. I wonder if I triggered something when I was messing about with it. All root test apps show me as locked.
Same issue here. Received my phone back from Huawei repairs and no longer allows Android Pay or fingerprint login for Natwest app. No flashing or rooting whatsoever. Fails SafetyNet test with the "CTC Profile Match:False" nonsense too.
Currently on EMUI 4.1 Build EVA-C900B166 and Android 6.0
Don't really want to be flashing anything onto the phone and have seen the OnePlus 3 seemed to have a similar issue before it was resolved with an update however I got nowhere when speaking to Huawei this afternoon. Has anybody having any luck resolving this without too much tinkering with the software?
JacquesPollard said:
Same issue here. Received my phone back from Huawei repairs and no longer allows Android Pay or fingerprint login for Natwest app. No flashing or rooting whatsoever. Fails SafetyNet test with the "CTC Profile Match:False" nonsense too.
Currently on EMUI 4.1 Build EVA-C900B166 and Android 6.0
Don't really want to be flashing anything onto the phone and have seen the OnePlus 3 seemed to have a similar issue before it was resolved with an update however I got nowhere when speaking to Huawei this afternoon. Has anybody having any luck resolving this without too much tinkering with the software?
Click to expand...
Click to collapse
You are on C900 which is a "Frankenfirmware" (flashing a C432 build over a C636 make appear C900 for example)
To succeed the safetynet check you mustn't be on C900.
Envoyé de mon EVA-L09 en utilisant Tapatalk
Marsou77 said:
You are on C900 which is a "Frankenfirmware" (flashing a C432 build over a C636 make appear C900 for example)
To succeed the safetynet check you mustn't be on C900.
Envoyé de mon EVA-L09 en utilisant Tapatalk
Click to expand...
Click to collapse
Hi and thank you for your reply.
I have no idea about anything like this, what is C900 and a "frankenfirmware" and ultimately is it simply going to have to be a matter of me waiting on a manufacturer update? Sorry for the more than likely stupid questions?!
JacquesPollard said:
Hi and thank you for your reply.
I have no idea about anything like this, what is C900 and a "frankenfirmware" and ultimately is it simply going to have to be a matter of me waiting on a manufacturer update? Sorry for the more than likely stupid questions?!
Click to expand...
Click to collapse
You can read more here.
http://forum.xda-developers.com/showthread.php?t=3384748
A C900 can't receive OTA nor accept manual update. You have to unlock bootloader then do some manipulation. Read this thread
Envoyé de mon EVA-L09 en utilisant Tapatalk
Device: Samsung A10e
Chipset: Exynos 7884
Hi, I was trying to Change my phone's IMEI, but my phone doesnt allow me to unlock bootloader and so I thought nothing can be done about it, because I tried everything from restarting the phone into Recovery mode to Changing the date and time trick... But nothing works...
Today I came across Virtual Xposed and thought this might be a good way to use a different IMEI for my use, but it does not change system settings(which I expected), I also noticed that the IMEI is already changed in this VirtualXposed app env and so I thought i should install some type of dialer and try it out, but I cant seem to find and install any dialer for this purpose, I tried installing a Phone app from somewhere but it doesnt work.
I would appreciate any help to:
Install some Phone app compatible with Virtualapp or VirtualXposed.
Or even an IMEI changer that can work without root on this chipset
or a method to unlock bootloader
Hello guys!
Six months ago I bought a used note 8 SM N950F once I tried to install another rom (custom one) after backing up the whole mobile by twrp, after installing the rom, the phone couldn't detect sim cards and imei, when I returned to the backed up rom everything were fine.
I searched for my phone's imei and the result was these imei numbers belong to another samsung device, samsung ace I think.
What is the problem? I can't use any rom exept the original stock rom which already installed to this device, help me finding a solution to install another roms with working sim cards.
Which ROM u tried? And also did u make a backup of efs?
soyuz4u said:
Which ROM u tried? And also did u make a backup of efs?
Click to expand...
Click to collapse
Could I make an EFS back up and use this back up for the other rom?
Yes i think it can be done
... Quite a few tutorials to do that online. Go ahead and Google it.... I have not done it myself. So i will not be held responsible if anything goes wrong. But it should work. All the best.
abo we2am said:
Hello guys!
Six months ago I bought a used note 8 SM N950F once I tried to install another rom (custom one) after backing up the whole mobile by twrp, after installing the rom, the phone couldn't detect sim cards and imei, when I returned to the backed up rom everything were fine.
I searched for my phone's imei and the result was these imei numbers belong to another samsung device, samsung ace I think.
What is the problem? I can't use any rom exept the original stock rom which already installed to this device, help me finding a solution to install another roms with working sim cards.
Click to expand...
Click to collapse
You need to return that device immediately it's never going to work you cannot use ANY efs folder from ANY other devices and even if they do flash they will not work!! Stop wasting your time and send it back!!
hainguyenthao said:
Can you tell me your bit version maybe i can help
Click to expand...
Click to collapse
SM-N950F
N950FXXUZDSH1
The stock rom which installed seems to be "claro"
but I have claro sim app installed on my phone
Hi, im kinda desperate cause i really dont know what to do , here is my issue:
I bought a second hand s20fe i didnt know but its rooted and i want to remove it
The problem is that i tried booting it to download mode removing the root and trying to flash a original samsung stock firmware from odin, but it keep getting a error. Well i realized that the phone original model is SM G780G
And that the software that it had , was the SM G780F
So i downloaded a software for the G780F and apparently it worked with odin
But i want the original G780G software... what can i do?
fawkes1234 said:
Hi, im kinda desperate cause i really dont know what to do , here is my issue:
I bought a second hand s20fe i didnt know but its rooted and i want to remove it
The problem is that i tried booting it to download mode removing the root and trying to flash a original samsung stock firmware from odin, but it keep getting a error. Well i realized that the phone original model is SM G780G
And that the software that it had , was the SM G780F
So i downloaded a software for the G780F and apparently it worked with odin
But i want the original G780G software... what can i do?
Click to expand...
Click to collapse
I'm pretty sure your problem is:
you want to install a system with wrong binary.
Go into download mode and see what binary you have.
After you are sure which binary has downloaded the system you need and that's it.
if you have binary 3
upgrade to binary 3
If you can show a photo of what binary you have to observe.
Binario 1
mezacorleehone said:
Binario 1
Click to expand...
Click to collapse
I would like to tell you the full problem tho if you are so kind to give me a hand. I bought the s20fe second hand and it was rooted with a patched imei (the box and the software imei didnt match), i checked both imei and they are not blocked , so the phone isnt stolen. But here is the thing, the model in the box says 780G, and this software is 780F, the soft and the imei doesnt match. I tried rooting and unrooting, but now i dont have signal and i still have the same imei and software version, i would like to switch to the original imei cause im sure im able to use it , as well i would like to install the proper software version.
fawkes1234 said:
I would like to tell you the full problem tho if you are so kind to give me a hand. I bought the s20fe second hand and it was rooted with a patched imei (the box and the software imei didnt match), i checked both imei and they are not blocked , so the phone isnt stolen. But here is the thing, the model in the box says 780G, and this software is 780F, the soft and the imei doesnt match. I tried rooting and unrooting, but now i dont have signal and i still have the same imei and software version, i would like to switch to the original imei cause im sure im able to use it , as well i would like to install the proper software version.
Click to expand...
Click to collapse
the equipment is not G780G.
1.G780G goes up to binary 4
2.G781B arrives
up to binary 5
3.G781U /U1 /V / N / W . go up to binary A(10)
4.G780F reaches binary A(10)
your equipment is a G780F and not a G780G. You can never load a system from another team, only from your variant.
Download an example system:
G780FXXUAFWB6
Currently there is the binary B(11).
luck.
unfortunately
it was advisable to leave it as it was when buying it.
if everything worked fine, there was no need to update.
just leave it with the system that was already installed.
since to change the imei, chimeratools, z3x is used. etc
They are paid applications and experience is required for it.
I used the z3x, that's why I'm telling you.
I dont understand, cause the model is in the back of the phone...
mezacorleehone said:
unfortunately
it was advisable to leave it as it was when buying it.
if everything worked fine, there was no need to update.
just leave it with the system that was already installed.
since to change the imei, chimeratools, z3x is used. etc
They are paid applications and experience is required for it.
I used the z3x, that's why I'm telling you.
Click to expand...
Click to collapse
It didnt worked fine tho, i had a very low signal, now that i made a mess of course i would love to be back, but i dont know how to install a signal patch and i doubt that samsung would help me if im out of warranty, so i basically lost half of my saves on a phone that i can barely use now... what a luck
fawkes1234 said:
I dont understand, cause the model is in the back of the phone...
Click to expand...
Click to collapse
Personally, it is impossible to install an exynos system on a snapdragon.
It's like putting the engine from one car to another, just like that.
the cover says one thing, your phone another.
the caps are interchangeable.
Those can be put from an s20 fe exynos to a snapdragon.
check well.
personally you have a G780F.
try not to upload to binary B(11)
you will have to pay to solve the problem.
install software that it had initially, if the system was binary 9, it will be impossible.
install
G780FXXUAFWB6
android 13 one ui 5.1 february 2023
Download Galaxy S20 Fan Edition SM-G780F (MXO) G780FXXUAFWB6 in Samfw - Samsung firmware download
Galaxy S20 Fan Edition SM-G780F (MXO - Mexico) G780FXXUAFWB6 T(Android 13) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
the interchangeable cap make sense and also solve the imei trouble, i will choose to believe in your experience. But logically, then the email should be the one that is on the software right? and not in the cap? i already installed that version you told me, but how can i restore the signal? i just need to restore that and i will be able to sleep cause ive been awake almost 10 hours trying to figure out this mess
I really don't know if you can fix it.
I think your equipment was only rooted. The signal always worked.
I never touched the imei of your equipment.
It may even be that you are presenting a software error. once going to binary B. you will not be able to return to binary A.
if the problem does not recover without any update. It could be a problem with the internal antennas.
that they are disconnected.
I realized the problem, the case was switched indeed. And the original imei was changed because it was blocked. Since i update to the most recent binary and there is no chance to downgrade that, i wont be able to use sim cards anymore or at least until there is a new versión for patching the signal. I dont know which program the technicians use so i dont know if im ever going to recover the phone. An awful purchase and a even better movement from my part trying to update the android and removing the root. Im just disappointed, i hope this thread helps someone to not make the same mistakes...
At this point i dont even mind to pay for a signal patch, but there isnt a update for the system they use to do it. If someone knows anything about it, would be pretty helpful.
I understand what you're saying:
As a technician I understand.
Always before making changes, you have to know what we are getting into.
If you already knew that the imei was repaired and patched, for nothing in the world to update.
as advice, do not upgrade to binary B
stay in binary A.
The solution will come out, it always comes out for computers with an unlockable bootloader.
stay on february patch one ui 5.1 with binary A.
The rest are security updates.
Before listening to me, check that the system does not contain bugs.
in the best of cases, repair and sell, buy a G780G or G781B
luck.