So i was going to flash CM11 onto my Kindle fire HD using the freedomboot/twrp method, but i forgot to revert the os back. Now whenever i boot i get a red screen. Now i would be able to fix this (I have a fastboot cable) but ADB/Fastboot does NOT appear with the device. Everything always stays on < waiting for device >. My device manager says Tate-PVT-08, and the kindle goes into fastboot mode fine (Orange FASTBOOT with small kindle fire below it), but NOTHING recognizes it. I NEEEDDD HEELLLLPPPPPP :crying:
P.S I am using windows 8.1 if that helps
Edit: Solved!!! The key was entering the update driver window and click browse my computer, instead of the file option.
So i made the mistake of factory resetting my kindle from within cm 12 and now teamwin keeps flashing. I have tried to solve using the sr tool but it always says waiting for device.I also tried to use the unbricking utility but it says idme not found and does nothing for the stuck at logo option. i have the kindle adb drivers installed and whenever the kindle goes into fastboot mode it never shows a menu. Also my computer is not recognizing the kindle, however when i plug it in i hea the noise as if it is being recognized. Also when i open the adb console and use adb devices it shows up as in recovery. Any help will be much appreciated.
Hey guys i had my kindle fire hd 7 running cm13 and was running fine. i had alot of apps and data so decided to perform a factory reset within the rom, now i am stuck on the twrp screen which just blinks occasionally. i have tried connecting to a computer and using adb but it comes back my device isnt authorised and i cant authorise as i cannot boot. i have also tried some fastboot commands but it comes back (waiting for device) im guessing this is when the screen pops up for you to authorise adb but i get nothing. any help please or is this just done for.
any help geting this fixed will be appreciated thanks!!! :fingers-crossed:
UPDATE.
I managed to get into fastboot mode with a diy fastboot cable but fastboot still comes back (waiting for device) when I run the command "fastboot devices" it comes back with an empty list can someone please help I have tried uninstalling and reinstalling drivers but nothing . Please help anyone?
Dear specialists from XDA:
I'm from Brazil, and I bought a Kindle Fire HD 7 (MODEL x43z80 'tate') with the last original Fire OS, and the Amazon universe don't have a lot of things in Brazil, so I decided to put a Cyanogenmod based on Marshmallow. My guide is the Tekify Channel, and I got it.
But, after a soft reset, because I want to give a gift to my wife, I have the TWRP bootloop issue.
After a 1 week from search in XDA and a lot of English tutorials in youtube, today I have the kindle in stucked in the 'Kindle Fire' logo bootloop.
So, I search here in XDA wha I have to do, and I stucked.
I don't have a fastboot cable, in Brazil Amazon sold just the basic kindle e-reader, and I want the Kindle Fire good again... :crying:
Someone help me? I try ALL the aplications here, like: KFHD unbrick, Kindle Fire 1st Aid, but I1m stucked in the Kindle Fire logo.
I can't access the ADB or Fastboot, because the computer don't recognize the KFHD, and I can't access the TWRP or any screen, I tried a lot of times the command POWER+VOL DOWN, but I return to the 'Kindle Fire' logo.
Thanks for the help.
J.C.
From powered down condition, press power button, then hold POWER-UP, until blue fire logo appears and continue to hold for a couple of seconds, then release. It should go into TWRP. From there, ADB should work. If not, try powering up while connected to PC with USB cable. Hopefully it will boot into fastboot mode. I use linux because windows has too many problems with drivers.
basenjidad said:
From powered down condition, press power button, then hold POWER-UP, until blue fire logo appears and continue to hold for a couple of seconds, then release. It should go into TWRP. From there, ADB should work. If not, try powering up while connected to PC with USB cable. Hopefully it will boot into fastboot mode. I use linux because windows has too many problems with drivers.
Click to expand...
Click to collapse
hi,
i have Kindle Fire HD 7" after some issues i try to flashing, voip all data and delete backup etc, my WTRP V.2.7.8.0 changed to v.2.6.3.1 and stuck in kindle fire logo and not connected to pc or not show storage in my computer.
please help me and restore my kindle fire tate. thanks a lot (i am using Ubuntu 14.04 LTS)
Can you boot into TWRP? You need to update to at least V2.8.7.0. I'm running V3.0.0.0 but I can't find the download link anywhere. If you're in TWRP 2.6.3.1 try going the the boot menu and reboot to bootloader. This should put you in fastboot. Next, connect to PC via USB. Type fastboot devices to see if it's working. Now fastboot flash recovery /(path and filename to TWRP 2.8.7.0) Once you have the newer version installed, remove usb cable and reboot to twrp and make sure mtd is enabled in the mount menu. You sould be able to connect usb cable and drag and drop your chosen ROM and gapps into the internal storage where you can install them with TWRP.
basenjidad said:
Can you boot into TWRP? You need to update to at least V2.8.7.0. I'm running V3.0.0.0 but I can't find the download link anywhere. If you're in TWRP 2.6.3.1 try going the the boot menu and reboot to bootloader. This should put you in fastboot. Next, connect to PC via USB. Type fastboot devices to see if it's working. Now fastboot flash recovery /(path and filename to TWRP 2.8.7.0) Once you have the newer version installed, remove usb cable and reboot to twrp and make sure mtd is enabled in the mount menu. You sould be able to connect usb cable and drag and drop your chosen ROM and gapps into the internal storage where you can install them with TWRP.
Click to expand...
Click to collapse
first thanks a lot basenjidad for you attention and quick reply.
yes divice boot in TWRP and < i have v.2.8.7.0 file > my kindle access to fasboot mode but after connecting to pc not reconize and in the mount menu mtd option not show.
(adb & kindle usb driver already installed) sorry my english is not good
Make sure USB 2.0 or less on PC port. Try a different cable. Try another Android device just to make sure everything works on the computer.
basenjidad said:
Make sure USB 2.0 or less on PC port. Try a different cable. Try another Android device just to make sure everything works on the computer.
Click to expand...
Click to collapse
Thanks again to you
Kindle show in my laptop but connect see pics.
Try installing mtp USB many times but not successfully installing in my laptop.
you need a newer version of twrp. If fastboot won't work, I don't know how you can flash a new recovery or bootloader.
The last thing to try would be to update adb and fastboot from Google or the Ubuntu repositories. https://developer.android.com/studio/releases/platform-tools.html
Try: fastboot -i 0x1949 getvar product
Try with root: sudo su
I have never used a fastboot cable. It hasn't been necessary but it may be in your case.
basenjidad said:
The last thing to try would be to update adb and fastboot from Google or the Ubuntu repositories. https://developer.android.com/studio/releases/platform-tools.html
Try: fastboot -i 0x1949 getvar product
Try with root: sudo su
I have never used a fastboot cable. It hasn't been necessary but it may be in your case.
Click to expand...
Click to collapse
hi,
many thanks bro.
has a my new issue > hi,
I have Kindle Fire HD 7" (2nd Generation)
model no X43Z60
FCC ID YJM-0725
(Operating System: Windows 7 & Linux)
On Yesterday Try with SRTool v1.3.5 Connect and Applying Option# 4th> remove cache and system and option# 1st> restore-factory rooted with super SU.apk uploading <recovery 7.3.0.image > Successfully Complete and Exit.
After Re Boot the Device Stuck in Kindle-fire Orange Logo and Logo Blink after Every 10 seconds and not detecting to pc.
Please help me and Recover the issue. Thanks so much
Hello guys,
I have a Kindle Fire HD7 with TWRP 3.0.2-0.
I was on an old Cyanogen mod ( from 2015) and try to flash the latest LineageOS for TATE.
I flash the rom with the Gapps, then after reboot, the device was looping on the lineage logo.
I did a hard reboot, then now the Kindle stuck on the KIndle Fire (white/blue).
I'm unable to enter in fastmod ( <Waiting for devices>) and if i try to go in TWRP, it stuck on TWRP splashscreen
What can i do to unbrick it please ?
I don't find my Amazon USB cable...I need it to enter in fastboot mod ? Any tutorial to do a DIY fastboot cable please ?
Any other tips please ?
I can only see the device As "MTP device" on my pc.
Thanks a lot,
Nix'
Nixeus said:
Hello guys,
I have a Kindle Fire HD7 with TWRP 3.0.2-0.
I was on an old Cyanogen mod ( from 2015) and try to flash the latest LineageOS for TATE.
I flash the rom with the Gapps, then after reboot, the device was looping on the lineage logo.
I did a hard reboot, then now the Kindle stuck on the KIndle Fire (white/blue).
I'm unable to enter in fastmod ( <Waiting for devices>) and if i try to go in TWRP, it stuck on TWRP splashscreen
What can i do to unbrick it please ?
I don't find my Amazon USB cable...I need it to enter in fastboot mod ? Any tutorial to do a DIY fastboot cable please ?
Any other tips please ?
I can only see the device As "MTP device" on my pc.
Thanks a lot,
Nix'
Click to expand...
Click to collapse
If you don't know how to solder, then just buy a fastboot cable, it works wonders.