Related
I decide to share it there because I don't know better place for this...
This is an Xposed framework variant built for MIUI based devices running Android 5.0, 5.1 and 6.0.
Tested and working on latest ROM's on various devices.
Fully working resource hooking and themes.
Prerequisite:
- Custom recovery (CWM, TWRP)
Bugs report:
- If you get any lag, broken feature or any App force closing, post your Xposed logs.
- If you get a boot-loop, reboot and get the logcat with "adb logcat -v time".
Please pay attention:
Archive with Xposed installation contains some necessary information and it is very important to successfully installation to choose right archive.
- "arm" means the devices that are running arm32 operating system and uses ARM architecture CPU.
- "arm64" means the devices that are running arm64 operating system and uses ARM64 architecture CPU.
- "x86" means the devices that are running x86 operating system and uses x86 architecture (Intel) CPU.
- "sdk21" means Android Lollipop 5.0.x
- "sdk22" means Android Lollipop 5.1.x
- "sdk23" means Android Marshmallow 6.0.x
If you try to install wrong archive it will not installed and error message appears in TWRP installation log.
Magisk
Magisk (systemless) variants of archives separated only by Android versions (sdk21, sdk22 and sdk23). CPU architecture will be detected automatically.
How to install:
- Install Xposed Installer app
- Make a nandroid backup
- Copy the Xposed file and the uninstaller to your sdcard
- Flash "xposed-vxx-sdkxx-armxx-MIUI-edition-by-SolarWarez-xxxxxxxx.zip" through a custom recovery (TWRP/CWM...)
- Reboot and wait, it may take several minutes to boot up depending on your ROM size and installed apps amount. If phone still not boot after 5 minutes then you need get boot log by "adb logcat -v time", reboot into recovery and restore backup or de install Xposed
Attention!
Starting from v86 official version of Xposed become more compatibly with ROMs that use a Resources subclass for e.g. theming, like MIUI.
So, try firstly official Xposed on your device. If it will works well (take a look at themes, if they works well, then all Ok), then you doesn't need this version of Xposed.
But I suppose that on some devices official Xposed still may cause bootloops.
Donate to @rovo89
All credits go to @rovo89 for his amazing job on Xposed framework
Can you post your sources? Are the "Resources" and "TypedArray" the only changes?
Share your sources please
Thanks
in mi4c works perfect!!!thanks man
the only thing that ''breaks'' is edge utility!!!and another that dowload modules manual not from inside app(doesnt care at all) just mention it!!!thanks again!!!
Can't download MODULES directly from xposed app.
Sent from my MI 4S using Tapatalk
ViTAMiNCHEG said:
Can't download MODULES directly from xposed app.
Sent from my MI 4S using Tapatalk
Click to expand...
Click to collapse
That was always a issue with xposed and miui, even when I've used it on my nexus 4. Guess it have something to do with permissions with miui.
Line app unable to open photo selector activity https://drive.google.com/file/d/0B3TzmNRa2nE6RE1kbHhuNUV5Y2c/view?usp=drivesdk
Sent from my hermes using XDA Labs
Nice! I submitted a request for include this in Material Design Xposed Installer. It would be awesome!
If i already flashed v80, do i need to flash the uninstall.zip before flashing v83, or can i flash v83 directly?
dagger1 said:
If i already flashed v80, do i need to flash the uninstall.zip before flashing v83, or can i flash v83 directly?
Click to expand...
Click to collapse
Flash it directly without uninstalling
Sent from my MI 4S using Tapatalk
Hey bro i was using miui v80 on mi4 wile long but accidently i flashed official xposed v83 file from xposed installer and got boot loopbafter that i had uninstalled xposed with zip and rebooted phone!! My mi4 booted normaly but now if i am flashing miui xposed v80 which i previously used and clear dalvik cach than phone does not optimizing any apps and system apps crashing!! Cant do any opration!! Same is happen with v83 also and also i updated my whole miui devloper rom to new version thus i cant flash xposed got same error!! Plzzz help!!
Sent from my MI 4W using Tapatalk
saiyammorakhiya said:
Hey bro i was using miui v80 on mi4 wile long but accidently i flashed official xposed v83 file from xposed installer and got boot loopbafter that i had uninstalled xposed with zip and rebooted phone!! My mi4 booted normaly but now if i am flashing miui xposed v80 which i previously used and clear dalvik cach than phone does not optimizing any apps and system apps crashing!! Cant do any opration!! Same is happen with v83 also and also i updated my whole miui devloper rom to new version thus i cant flash xposed got same error!! Plzzz help!!
Sent from my MI 4W using Tapatalk
Click to expand...
Click to collapse
I had similar problem, fixed by deleting the xposed folder in /data partition
@SolarWarez Got bootloop after install xposed tweak (ROM: 6.4.28)
Firstly i was install xposed in my phone (arm x64 v83 hermes) and i just need to wait until it finished boot
Then i install extMIUIv7, check tickbox for enabled it, and reboot
And voila, i got bootloop
I tried to format art cache in TWRP and it fixed it.
Well this is weird seems global beta + xposed break ART Caching
Sent from my hermes using XDA Labs
Not working
Can't install on Redmi Note 2, MIUI 7.3.1 stable (Android 5.0.2).
Error is: "chown: /system/lib/libart.so.orig.gz: Read-only file system".
Manual mounting in r/w mode does not help =(
Actually, this file libart.so.orig.gz is not the first in batch and not the last, but error happens only with it.
update: I have modified SolarWarez's package, now installs normally. Tested, working.
(what i did is disabled script interruption on some errors while setting owner and permissions on files).
Download here: https://drive.google.com/open?id=0B4lahQDWFyqqOHJKaFFfbEtmZlE
How to uninstall Xposed?
I have flashed xposed-v83-sdk22-arm64-MIUI-edition-by-SolarWarez-20160428 but any downloaded and enabled module won't work (even after reboot).
Moreover my Xiaomi Redmi 3 Pro is laggy now.
How can I unistall it?
ROM MIUI 7 by miui.it 6.5.5 based on Android 5.1.1.
Edit:
Uninstalled flashing xposed-uninstaller-20150831-arm64.zip by TWRP
I'll use it when I buy my Xiaomi... in the future...
Hi just discovered a bug: when in stock browser I go to bookmarks/history browser force closes. This also happens when browser tries to show a dialog window (for instance, when you go to xiaomi.eu it asks to install tapatalk). Log attached
Edit: attached another log got when getting to copy text in stock browser
I have flashed xposed-v83-sdk22-arm64-MIUI-edition-by-SolarWarez-20160428 on MIUI7 using Lenovo A7000-a
Xposed give error, Phone freezes and I have to retart it by pulling battery of mobile phone. I am using Xposed for only XInternalSD because its mount SD Card as internal Memory.
When is v84 coming? Hope bugs get resolved and there's compatibility with miui 8
-This methode is old but working with emui 4 Android MM (6). Not work with Android N (7).
-Xposed not work in systemless mode if your Android security patch is >= november 2016
-Try to search the last version of zip files and apk on google, the version on this tutorial is old.
Hi!
This tutorial will install Magisk, phh's superuser, xposed and busybox on your Huawei P9 lite device!
Tested on a VNS-L31C432B151 version but normally work on all VNS-L31 and VNS-L21.
Magisk will allow you to "hide" the root... not realy just hide because Magisk and phh's superuser systemless edition create the root outside the system folder!
Magisk feature for common user:
-"hide" root (PokémonGo, Androidpay, banking app, ... all work!) work with
-Magisk not only allow you to replace existing file and directories, but also support adding new files and directories into system!
-Update OTA work! (not tested by me)
For more detail visite this post: http://forum.xda-developers.com/android/software/mod-magisk-v1-universal-systemless-t3432382
Phh's superuser work at 100% on this device
After a lot of Xposed version tested I can say that Xposed systemless edition is by far the best for P9 lite!
DONT install busybox on system folder!
Ok let's go:
1 Update your system on last emui version and swipe data/factory reset to get a clean and untouched device!
2 Unlock your bootloader (see multiple method on this forum)
3 Install TWRP 3.0.2.0 (see multiple method on this forum)
4 Download this files: Magisk V6.zip / phh's superuser 17.zip / xposed-v86.5-sdk23-topjohnwu.zip / Magisk Manager.apk / XposedInstaller_by_dvdandroid.apk. Put all this files on your externalSD.
5 Go to TWRP recovery and flash in order [Magiskv6.zip > phh's_superuser.zip > Xposed-v.86.5.zip] also reboot your device.
6 When you are on the homescreen go reboot again.
7 Install Magisk Manager.apk and XposedInstaller.apk, then go to the playstore download and install Phh's SuperUser app AND Busybox meefik. Reboot after this step.
8 Open your setting app and allow permission SD card to Busybox.
9 Open Busybox >> settings. Remplace the path file /system/xbin/ with /data/busybox/ and check "Remplace Applets". Also go Menu Zip Archive and download this zip.
10 Go on TWRP recovery and flash the busybox zip file.
10 please perform 3 or 4 reboot
DONE!
So, please try to open yours setting app. if it appears you have done! If not, please try again this method
Now, go Magisk Manager (app) and switch root togle off, launch your protected against root app and normally work!
(Dont need reboot between switch root off/on!)(Selinux switch work, but not persist a boot)
Have fun!
Well done. Works perfect.
The are no files any more
Links are dead
deleted
Evas0r said:
Battery draining after the process...
Is this xposed fault?
Click to expand...
Click to collapse
yes u have to flash another version
Did anyone try this on Nougat/Android 7?
Alexander33 said:
Did anyone try this on Nougat/Android 7?
Click to expand...
Click to collapse
TWRP with this [RECOVERY]Revolution Recovery Android Nougat {15-12-16} Beta .9 in Nougat but anything I tried to flash failed.
Is there anything one can do to get Pokémon Go working while having all of these installed?
Alexander33 said:
Did anyone try this on Nougat/Android 7?
Click to expand...
Click to collapse
Hey, man I've tested it on my Huawei P9-LITE B370 and it all works perfectly. To flash Magisk, you need this custom recovery (https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356)
this really helped me thanks
Helped me alot. Still, post is a bit old, so what I did on b380 version:
FLASH RECOVERY twrp-3.1.1-0-venus.img
FLASH KERNEL Elite+Kernel+for+P9+Lite+CxxB3xx+v10.1.zip
ROOT with Magisk-v13.0(96f8efc).zip
INSTALL busybox archive via recovery to /sbin (for me it installed on /system/xbin, still ok.)
REBOOT after each step
Finally works ! :good:
is this Magisk work on Huawei P9?
I have Emui 5.0 and Android 7.0. I flashed everything except xposed but I still can't use Pokémon Go or Snapchat. Is it beacause i can't flash xposed? And when yes, how can I fix it?
Lg ThePrinoob
ThePrinoob said:
I have Emui 5.0 and Android 7.0. I flashed everything except xposed but I still can't use Pokémon Go or Snapchat. Is it beacause i can't flash xposed? And when yes, how can I fix it?
Lg ThePrinoob
Click to expand...
Click to collapse
flash magisk v13
simo255 said:
flash magisk v13
Click to expand...
Click to collapse
Ok, I will test it!
I installed magisk v13 and got the app but it when it check safety net it doesnt work. What should I do?
ThePrinoob said:
I installed magisk v13 and got the app but it when it check safety net it doesnt work. What should I do?
Click to expand...
Click to collapse
enable magisk hide and see if usb debugging is enabled
simo255 said:
enable magisk hide and see if usb debugging is enabled
Click to expand...
Click to collapse
Okey thank you it worked.
Hey,
If I open the camera app or snpachat I cant make any picture so I have a blackscreen. What should I do? And in youtube or Instagram I cant see videos, they dont load and I also cant hear any sound.
Sorry for my bad english.
Hi all!
So I recently bought a Cubot Max but cant get any Xposed Modules to work!
Specs:
Cubot Max
Android 6.0
FW v11
arm64
I got the zip and apk off the official thread and used the latest sdk23 arm64 version obviously.
I mainly need the modules "Youtube Adawy" and "Youtube background playback".
But for the sake of testing if the issue is a result of incompatibility I also installed the modules
"PinNotif" and "SlideBack".
None of them worked.
The UI of "SlideBack" seemd to work properly while the UI of Youtube Adaway said that the app was not actived, even tho i tried it several times.
The log file read "cannot read log/data/data/de.robv.android.xposed.installer/log/error.log: open failed: ENOENT" so i created the missing txt file and gave it - rw rw permissions.
Does anyone has a clue what causes this problem?
greets
wambooo23 said:
Hi all!
So I recently bought a Cubot Max but cant get any Xposed Modules to work!
Specs:
Cubot Max
Android 6.0
FW v11
arm64
I got the zip and apk off the official thread and used the latest sdk23 arm64 version obviously.
I mainly need the modules "Youtube Adawy" and "Youtube background playback".
But for the sake of testing if the issue is a result of incompatibility I also installed the modules
"PinNotif" and "SlideBack".
None of them worked.
The UI of "SlideBack" seemd to work properly while the UI of Youtube Adaway said that the app was not actived, even tho i tried it several times.
The log file read "cannot read log/data/data/de.robv.android.xposed.installer/log/error.log: open failed: ENOENT" so i created the missing txt file and gave it - rw rw permissions.
Does anyone has a clue what causes this problem?
greets
Click to expand...
Click to collapse
Exactly I am also facing the same problem.
Same here
Can we have a thread to get the Cubot Max working with Xposed? A 500+ page general thread is difficult to follow. Thanks!
Success!
I did it! This is what I did.
The problem is that there is a firmware error which affects a number of MTK6735 phones and stops Xposed from working. You have to install another module called grorkmod first, but this will not work if you have previously tried to install Xposed. So what I did was set the phone back to its initial state (after backing up data etc.).
1. Download the Custom TWRP and the Cubot Max official ROM from here:
mod edit: link removed
2. Unrar the official ROM, and, using SP Flash Tool, set to "Format and Download", Flash the ROM in full. You will now have an unrooted, untouched factory-set phone.
3. When I did this, the Firmware version (Build Number) was V04 — check this through your system settings as my phone originally arrived with Build Number V09. So, after unzipping the TWRP download, I had to use the older version of the Scatter file. So use SP Flash Tool again, and Flash TWRP and reboot the phone, you will have an unrooted phone but with TWRP installed. Do the usual stuff with becoming a developer and changing the necessary permissions.
4. Now you can transfer files to your phone's memory.
UPDATE-SuperSU-xxx,zip
grorkmod_v1.1+lite.zip
xposed-v87-sdk23-arm64.zip
XposedInstaller_3.1.1.apk
5. Boot to Recovery, and, from TWRP:
(a) Install UPDATE-SuperSU-xxx.zip but do not reboot.
(b) Clear Dalvik cache etc
(c) Install grorkmod do not reboot.
(d) Install xposed — this time reboot.
6. Run your file manager and attempt to install the .apk file. If you are diverted to give permission for this, change the settings and do it again.
Hope this helps.
Hi everyone !
I'm currently running XPosed on my One Plus 3 (Oxygen V4.5.0, Android 7.1.1), but impossible to use Xposed installer. I try to flash from recovery to install Xposed, and also from Xposed Installer. But when the installation is "finish", an my phone reboot, if I go on Xposed Installer to search for modules (better with modules I guess...), impossible to install anyone. The download start and stop a 64Kb, and no install button even if I download manually the apk. I also try to install from apk, but the module "must be activated". I try activae it from XposedInstaller, and also look in root folder for the "disable" file (see this solution on another thread) but none of these worked.
Also, I install Xposed 88.2, and when I open xposedinstaller, it's always saying to me a little notification "Please update Xposed Installer".
I try everythink, wipe my phone twice, reboots, wipe only cache after every step, reboots, reinstall Xposed, reboots, reinstall module manually, reboots, and also some reboots.
Do anyone can help me ?
Thank's a lot, and pardon my English
Solved by installing the unofficial Xposed Installer
Hello ! Every time I install BusyBox from PlayStore or Magisk Repository , I go into a bootloop ... I want to try viper audio on Android 10 Miui 11 but he needs BusyBox installed ... So , how to solve this ? I have the latest global stable 11.0.3.0 / 11.0.5.0 MIUI 11
Try to install orange fox recovey -> reinstall magisk -> install busybox from magisk. I have no bootloop when install busybox from magisk. If you bootloop when magisk module install, you easy delete module from orangefox recovey. Sorry for my bad english
mrback007 said:
Try to install orange fox recovey -> reinstall magisk -> install busybox from magisk. I have no bootloop when install busybox from magisk. If you bootloop when magisk module install, you easy delete module from orangefox recovey. Sorry for my bad english
Click to expand...
Click to collapse
Are you sure you don't have bootloop on the last MIUI 11 EEA stable 11.0.5.0 ? I tried 3 times ...
ManDone.vRs said:
Are you sure you don't have bootloop on the last MIUI 11 EEA stable 11.0.5.0 ? I tried 3 times ...
Click to expand...
Click to collapse
Your phone bootloop when install magisk or busybox ?? If bootloop when install magisk try to "format data" not " wipe data" . note " format data" will delete all internal storage
I don't use EEA but every rom i use eg : xiaomi eu, miuimix, lineage os,PE ... No bootloop when install busybox, just bootloop when install magisk
mrback007 said:
Your phone bootloop when install magisk or busybox ?? If bootloop when install magisk try to "format data" not " wipe data" . note " format data" will delete all internal storage
I don't use EEA but every rom i use eg : xiaomi eu, miuimix, lineage os,PE ... No bootloop when install busybox, just bootloop when install magisk
Click to expand...
Click to collapse
It's bootloop after flashing or install BusyBox . The last version of miui 11 and Android 10
same case on me
im on miui 12 android 10, global stable 12.0.1.0, waiting for solution, because i want instal v4a like before when im on miui 11
ManDone.vRs said:
It's bootloop after flashing or install BusyBox . The last version of miui 11 and Android 10
Click to expand...
Click to collapse
This is SAR. Do not install BusyBox app but BusyBox (systemless) Magisk Module from Magisk Manager
zgfg said:
This is SAR. Do not install BusyBox app but BusyBox (systemless) Magisk Module from Magisk Manager
Click to expand...
Click to collapse
That`s works on all SAR devices or not? I have Samsung SM-T510 (all new Samsung`s going with system-as-root) and root it through Magisk app like in official guide from John Wu for Sams devices, but i have any doubts about installing Magisk modules on modified (but still commonly stock) ROM.
vlrgamaley said:
That`s works on all SAR devices or not? I have Samsung SM-T510 (all new Samsung`s going with system-as-root) and root it through Magisk app like in official guide from John Wu for Sams devices, but i have any doubts about installing Magisk modules on modified (but still commonly stock) ROM.
Click to expand...
Click to collapse
Unfortunately, there is no such thing - "works on all devices" or things like that.
Nobody can guarantee you in advance (if not willing to test yourself, afraid of nuclear blast or something, then don't root your phone )
There are differences between vendors, Android version, etc, specially who knows in advance what you might have in your custom ROM xxx on the device yyy and would something work or not
However, if SAR is read only, then any BusyBox installation (like older apps, maybe older modules) that attempt.to write directly to /system will fail.
Therefore suggestion was to use the given BB module, that uses the systemless mechanism provided by Magisk - in that case it SHOULD work no matter if your SAR is read-only or not
Plus, you just later disable the module and reboot, and BB is gone.
Similarly for any other systemless module and all their artefacts they 'install' to the System - hence, the systemless changes are much more 'secure' than old methods that attempt to make hard changes directly to the System (if something ever goes wrong you then have to reinstall the ROM or manually search and revert changes left by those apps)
If you are you are not familiar with the systemless concept, wether your SAR is read-only or not, etc - please google