Related
ALL OF THIS WORK IS DONE BY whirleyes! PLEASE CREDIT HIM AND NOT I. LINK OF HIS THREAD IS BELOW!
http://forum.xda-developers.com/showthread.php?t=2005187
Same exact thing , compatible with the Droid 4 and tested out on my Droid 4 and works fine. All I did was uninstall safestrap and simply install this app from playstore
Playstore link: https://play.google.com/store/apps/details?id=com.projectlense.bootmenu.manager&hl=en
As usual I'm not responsible nor the developer of the app is responsible for any damaged to your device.
What is Boot Menu Manager?
Well boot menu manager is practically a custom recovery (not going over the system recovery) that launches a screen at each boot asking for rom you want to boot. There are 6 slots and you can edit the system slot, although please remember when entering the recovery, do switch to rom slot 1 if you don't want to mess with system, if you don't you'll edit your stock system.
As this recovery is discontinued, it does support 4.3 and other Roms. I haven't go to mess around with all the apps but it works just fine. Sometimes by entering the recovery there is a slight delay. The Recovery seems to optimize kexec better and handle Roms a bit better, but that's just in my experience.
ALL OF THIS WORK IS DONE BY whirleyes! PLEASE CREDIT HIM AND NOT I. LINK OF HIS THREAD IS AT TOP OF THREAD!
Sorry to dig up old threads, but Safestrap will not work for me. My phone gets stuck at a certain point in the install (60/100) and then just hangs.
I was told that this might be an alternative method to get a Custom ROM on my Droid 4.
Is there a version out there of BMM that I can use?
@joefuf Yep, but
Do you have root?
Fervi
ferviverus said:
@joefuf Yep, but
Do you have root?
Fervi
Click to expand...
Click to collapse
Yeah, I do. I found BMM 0.3.4 and installed that. I managed to get a good updater-script to allow my ROM to be flashed onto my Motorola Droid 4 in System 1.
Is there another version I should be using? It was tough to find v0.3.4.
Unfortunately, I am still experiencing a lot of lagging and slow response from my ROM. Is this common with BMM? Is there anything I can do to optimize the ROM? Should I install my ROM somewhere other than System 1?
@joefuf
Eee, System 1 is on top-right?
If it is top-left, you probably delete stock rom (if u install CM or other ROM)
Fervi
ferviverus said:
Eee, System 1 is on top-right?
If it is top-left, you probably delete stock rom (if u install CM or other ROM)
Fervi
Click to expand...
Click to collapse
System 1 is top-left. I know that I deleted the Stock ROM. It's running fine and reboots into System 1 fine. The ROM just runs very slow. Do you know how to fix it?
Is there a better version of BMM than 0.3.4?
@joefuf
Well, BMM is unsupported (dead)
Technically special version of safestrap or BMM is to install system on "hidden Droid partitions", and u have 2 systems
Probably it's bugged rom, because CM works really fast
Fervi
Hi all,
I want to use OOS4.1.7 as my primary rom and LOS14.1 as the secondary one.
So, I'll have to use DuelPatcher (https://dbp.noobdev.io/downloads/)
I want to know, have anyone tried it?
does it work properly? are there any risks of damaging something or it is stable?
I don't want to use unofficial one as that's out dated.
is there anything which I'll have to keep in mind before using/flashing this mod?
Is DuelPatcher trusted?
can anyone of you share your experiences with DuelPatcher please?
yep
I used it ,but it is very complicated to flash rom or even update it. It bricked my OP3T
I lost my data because of dualpatcher
sidbvm321 said:
I used it ,but it is very complicated to flash rom or even update it. It bricked my OP3T
I lost my data because of dualpatcher
Click to expand...
Click to collapse
No, you didn't lose your data because of DualBoot Patcher, but because you didn't backup your data before doing the process.
Stop blaming devs / software when you are not able to take safe measure before installing something which can lead to this.
This is your fault, not DualBoot Patcher's one.
I would suggest to use MultiROM as it is easier to use than Dual Boot Patcher though our device is not officially supported we have very stable unofficial builds and I do use it on my daily driver and have never faced any major issues.
Hi bro, unfortunately I can't use the multirom as I will need to flash the modified recovery and that twrp doesn't recognise the recovery commands properly and it also doesn't work well with ADB.
DelicatePanda said:
I would suggest to use MultiROM as it is easier to use than Dual Boot Patcher though our device is not officially supported we have very stable unofficial builds and I do use it on my daily driver and have never faced any major issues.
Click to expand...
Click to collapse
casual_kikoo said:
No, you didn't lose your data because of DualBoot Patcher, but because you didn't backup your data before doing the process.
Stop blaming devs / software when you are not able to take safe measure before installing something which can lead to this.
This is your fault, not DualBoot Patcher's one.
Click to expand...
Click to collapse
You, we need more people like you. Honestly, everyone is blaming the Devs for their own sloppiness.
sidbvm321 said:
I used it ,but it is very complicated to flash rom or even update it. It bricked my OP3T
I lost my data because of dualpatcher
Click to expand...
Click to collapse
i am not blaming dev for data loss but i am saying it is very complicated process for a average lad.
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about doing this to your device
YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
This is an Android 9.0 GSI (Generic system image ) specific for the Samsung A6!
WARNING: The GSI is unstable and some things are not working. Let me know what is not working please!
FLASHING GUIDE:
1. Formata Dalvik, System, Data and Cache.
2. Install the GSI and click on system image.
3. Reboot to recovery.
4. Install latest Magisk. (Not necessary)
5. Reboot.
BUGS:
No Storage and SD Card access. (On FN Variant)
FIXES
The SIM card reading has been fixed.
Download Link:
https://github.com/phhusson/treble_...9/system-arm32_binder64-aonly-gapps-su.img.xz
Telegram Group:
https://t.me/joinchat/AAAAAEWK3LnN80mnvcTUtA
My telegram username: Paxa202
Credits:
@BlackMesa123
@phhusson
IF THERE IS SOMEONE WHO WANTS TO HELP ME TO MAKE THE GSI STABLE, SEND ME AN PM ON XDA OR AN MESSAGE ON TELEGRAM.
Hello. Is there a thread where we can see how this prosses if done?
ariber14 said:
Hello. Is there a thread where we can see how this prosses if done?
Click to expand...
Click to collapse
The only thing "unusual" with the A6 is that it's a 64bits CPU running 32bits OS, with 64bits binder.
But that's standard in Android Pie.
So if you build pure AOSP GSI, you just use aosp_arm target.
For my GSI, that would be treble_a64_xxx (like treble_a64_avS-userdebug) target
phhusson said:
The only thing "unusual" with the A6 is that it's a 64bits CPU running 32bits OS, with 64bits binder.
But that's standard in Android Pie.
So if you build pure AOSP GSI, you just use aosp_arm target.
For my GSI, that would be treble_a64_xxx (like treble_a64_avS-userdebug) target
Click to expand...
Click to collapse
So is there a woring android p version for a6 plus or do we have to wait?
ariber14 said:
So is there a woring android p version for a6 plus or do we have to wait?
Click to expand...
Click to collapse
It probably works also with A6+
Shouldn't all GSI ROMs work with all devices with a or ab support or am I wrong?
DKzVeNgEnS said:
Shouldn't all GSI ROMs work with all devices with a or ab support or am I wrong?
Click to expand...
Click to collapse
Yeah but samsung A6 has something unusual, this commented phhusson earlier.
Phhusson: The only thing "unusual" with the A6 is that it's a 64bits CPU running 32bits OS, with 64bits binder.
But that's standard in Android Pie.
So if you build pure AOSP GSI, you just use aosp_arm target.
For my GSI, that would be treble_a64_xxx (like treble_a64_avS-userdebug) target
Because the 64bits CPU runs 32bits OS is the reason that normal GSI's doesn't boot on Samsung A6
Working on j6 too
sd card and working is j6.
camera not working and sim not working...
DaanDH12 said:
Yeah but samsung A6 has something unusual, this commented phhusson earlier.
Phhusson: The only thing "unusual" with the A6 is that it's a 64bits CPU running 32bits OS, with 64bits binder.
But that's standard in Android Pie.
So if you build pure AOSP GSI, you just use aosp_arm target.
For my GSI, that would be treble_a64_xxx (like treble_a64_avS-userdebug) target
Because the 64bits CPU runs 32bits OS is the reason that normal GSI's doesn't boot on Samsung A6
Click to expand...
Click to collapse
That's pretty normal for Samsung devices, especially lower spec variants.
A 64bit cpu is backward compatible with 32bit architecture, so shouldn't be an issue as long as the rom supports 32bit, built for ARM target as mentioned above.
ashyx said:
That's pretty normal for Samsung devices, especially lower spec variants.
A 64bit cpu is backward compatible with 32bit architecture, so shouldn't be an issue as long as the rom supports 32bit, built for ARM target as mentioned above.
Click to expand...
Click to collapse
Guys i made a custom rom from stock rom oreo. Everything looks good.i installed it through twrp.it boots,passes the bootlogo and then asks for wifi. I connect to internet.on the next page as normally it searches for updates but is stays there forever.i don't know why. I did it a couple of times and still the same.Internet is ok.and i did not remove anything that could affect google apps or accounts. I would appritiate some advice
ariber14 said:
Guys i made a custom rom from stock rom oreo. Everything looks good.i installed it through twrp.it boots,passes the bootlogo and then asks for wifi. I connect to internet.on the next page as normally it searches for updates but is stays there forever.i don't know why. I did it a couple of times and still the same.Internet is ok.and i did not remove anything that could affect google apps or accounts. I would appritiate some advice
Click to expand...
Click to collapse
Seems you've possibly disabled/removed a component required to facilitate update checking.
ashyx said:
Seems you've possibly disabled/removed a component required to facilitate update checking.
Click to expand...
Click to collapse
But i didn't change anything to the rom
There are some questions that i'm still not sure what to do.like
1.should i choose sparse,raw or permissive?
2. Should i incloude vendorn, odm and cache folder inside the rom?
ariber14 said:
Guys i made a custom rom from stock rom oreo. Everything looks good.i installed it through twrp.it boots,passes the bootlogo and then asks for wifi. I connect to internet.on the next page as normally it searches for updates but is stays there forever.i don't know why. I did it a couple of times and still the same.Internet is ok.and i did not remove anything that could affect google apps or accounts. I would appritiate some advice
Click to expand...
Click to collapse
Skip the whole setup thing! IMPORTANT! skip everything and setup wifi later, if you connect to wifi he goes searching for updates, but if you not connected to wifi, it skips the update part!
DaanDH12 said:
It probably works also with A6+
Click to expand...
Click to collapse
Working on A6+ with sd card but sim card not working
DaanDH12 said:
Skip the whole setup thing! IMPORTANT! skip everything and setup wifi later, if you connect to wifi he goes searching for updates, but if you not connected to wifi, it skips the update part!
Click to expand...
Click to collapse
I did it. Rom is working good. Everything looks great. About the glitch during the setup i just install gapps 8 ARM after flashin Rom and it's ok.
Adb also work for me
The thing is i don't understand why something on google account breaks even though i dont make any changes at all from stock rom. I also get a difference at menu. T mobile, mobile networks and service provider are visible at custom rom menu like in the pic below. Another thing is that i used superr's kitchen 1.1.9.5 to do the job. When i use 2.0.0.5 the custom rom does not boot.
ariber14 said:
The thing is i don't understand why something on google account breaks even though i dont make any changes at all from stock rom. I also get a difference at menu. T mobile, mobile networks and service provider are visible at custom rom menu like in the pic below. Another thing is that i used superr's kitchen 1.1.9.5 to do the job. When i use 2.0.0.5 the custom rom does not boot.
Click to expand...
Click to collapse
I think you should post in a own thread. Otherwise people will confuse your post with the Treble Rom posts
nebkas said:
I think you should post in a own thread. Otherwise people will confuse your post with the Treble Rom posts
Click to expand...
Click to collapse
you are right. i will make a new thread for this
Codelyoko2409 said:
Working on A6+ with sd card but sim card not working
Click to expand...
Click to collapse
I think some proprietary binaries are missing in the rom. But shouldnt be so hard to figure out why sim is not working. What do you think @ashyx ? Should be to solve with tracking the log's?
Every Pie Rom I've installed with the February Update, kills my WIFI. It comes and goes, it's not stable. Check it guys, CHECK IT.
JJ5150 said:
Every Pie Rom I've installed with the February Update, kills my WIFI. It comes and goes, it's not stable. Check it guys, CHECK IT.
Click to expand...
Click to collapse
Strange, i'm running Ressurection Remix with no problems at all. Maybe you should check/reflash your radio?
Wisse said:
Strange, i'm running Ressurection Remix with no problems at all. Maybe you should check/reflash your radio?
Click to expand...
Click to collapse
Resurrection Remix is still UNOFFICIAL. Last version is 02/09. February OFFICIAL Security Update was Updated February 16-19, and all the PIE ROMS that are OFFICIALLY Updated with this update KILL THE WIFI.
Thanks tho.
I am using pixel experience and there isn't any problem I encountered
SAPTADIP MALAKAR said:
I am using pixel experience and there isn't any problem I encountered
Click to expand...
Click to collapse
May I ask what model number you have?
I'm running AEX 6.3 and my wifi is perfectly fine.
JJ5150 said:
May I ask what model number you have?
Click to expand...
Click to collapse
Hey , I am using Moto G5s plus and the model number is XT1804.
SAPTADIP MALAKAR said:
Hey , I am using Moto G5s plus and the model number is XT1804.
Click to expand...
Click to collapse
I'm on XT1806
I was presented with a workaround... Disable WIFI scanning in settings. Fixes Wifi drops. NO DICE. Totally unstable wifi.
No problem with me too.. using pixel experience on xt1804
I'm using havoc os in my XT1806 and everything is working great, also most people don't have your problem, you should restore your stock ROM backup and try to clean flash any pie ROM, this is not the devs fault.
Juancasa14 said:
I'm using havoc os in my XT1806 and everything is working great, also most people don't have your problem, you should restore your stock ROM backup and try to clean flash any pie ROM, this is not the devs fault.
Click to expand...
Click to collapse
Hi, i have a XT1806 too, I want to have the gcam, I just unlocked the bootloader, but I'm afraid to root it and flash a rom, how did you do it, thanks
prophetgamer said:
Hi, i have a XT1806 too, I want to have the gcam, I just unlocked the bootloader, but I'm afraid to root it and flash a rom, how did you do it, thanks
Click to expand...
Click to collapse
Hi ! Don't be afraid, if you follow every step correctly you shouldn't have any problems, if you already unlocked your bootloader you should flash the latest version of TWRP if you want to root your phone, you can't use gcam unless you do it because you need to enable cam2api by adding a specific line to the build.prop.
If you decide to root it, just flash the treble version of TWRP and then flash the latest version of magisk, then you'll be able to modify your build.prop !
Ask me if you need any help
Juancasa14 said:
Hi ! Don't be afraid, if you follow every step correctly you shouldn't have any problems, if you already unlocked your bootloader you should flash the latest version of TWRP if you want to root your phone, you can't use gcam unless you do it because you need to enable cam2api by adding a specific line to the build.prop.
If you decide to root it, just flash the treble version of TWRP and then flash the latest version of magisk, then you'll be able to modify your build.prop !
Ask me if you need any help
Click to expand...
Click to collapse
hello again, I tried to make a backup of the system image but it always says backup failed, I already made the wipe data to decrypt, but it did not work
prophetgamer said:
Hi, i have a XT1806 too, I want to have the gcam, I just unlocked the bootloader, but I'm afraid to root it and flash a rom, how did you do it, thanks
Click to expand...
Click to collapse
prophetgamer said:
hello again, I tried to make a backup of the system image but it always says backup failed, I already made the wipe data to decrypt, but it did not work
Click to expand...
Click to collapse
You don't need to backup the system image, just backup system, data and boot, and also persist and efs just in case you lose your IMEI. Are you using treble TRWP?
sorry if these are noob questions, however GSI's and custom roms confuse me, and I really don't want to brick my phone on accident
Preface:
I have a rooted moto g6 with an unlocked bootloader that supports project treble. as per getprop ro.treble.enabled running pie 29.55-24 Software channel Retail US
1. Can I flash a GSI on my phone
2. Where is there a good guide on how to flash a gsi
3. Will it factory reset my phone
4, Is there anything I should do beforehand
5. Are there any GSI's I can't flash
(What I think is 1:yes 2:If i knew i wouldn't be here 3:yes 4:backup system images 5: Yes
Thanks
Android Adam said:
sorry if these are noob questions, however GSI's and custom roms confuse me, and I really don't want to brick my phone on accident
Preface:
I have a rooted moto g6 with an unlocked bootloader that supports project treble. as per getprop ro.treble.enabled running pie 29.55-24 Software channel Retail US
1. Can I flash a GSI on my phone
2. Where is there a good guide on how to flash a gsi
3. Will it factory reset my phone
4, Is there anything I should do beforehand
5. Are there any GSI's I can't flash
(What I think is 1:yes 2:If i knew i wouldn't be here 3:yes 4:backup system images 5: Yes
Thanks
Click to expand...
Click to collapse
There are different types of treble devices you know. Only a couple GSI work on the g6.
GSI is a system image, so usually flash with fastboot.
Fastboot flash system system.img
Or in TWRP with the "install image" option.
The G6 does not have a b partition. So only try ones that say "arm A only". Meaning arm, not arm 64, and a - only, not a/b.
There is an entire section of this site devoted to it. Search "Project Treble". Without the quotes obviously
Here you go
https://forum.xda-developers.com/project-treble
Better yet here ya go
Built for the g6.
All GSIs are generic system images, so technically they can Flash on any device that has treble (with the correct CPU architecture and partitioning scheme) but when one gets built for your device most of the bugs have been worked out
madbat99 said:
There are different types of treble devices you know. Only a couple GSI work on the g6.
GSI is a system image, so usually flash with fastboot.
Fastboot flash system system.img
Or in TWRP with the "install image" option.
The G6 does not have a b partition. So only try ones that say "arm A only". Meaning arm, not arm 64, and a - only, not a/b.
There is an entire section of this site devoted to it. Search "Project Treble". Without the quotes obviously
Here you go
https://forum.xda-developers.com/project-treble
Better yet here ya go
Built for the g6.
All GSIs are generic system images, so technically they can Flash on any device that has treble (with the correct CPU architecture and partitioning scheme) but when one gets built for your device most of the bugs have been worked out
Click to expand...
Click to collapse
Thank you so much. I installed Lineage OS from https://forum.xda-developers.com/pr...i-lineageos-16-0-gsi-arm64-ab-how-to-t3908029 and my phone is working HOWEVER I can't read battery usage from setting but /data/system/batterystats.bin exists
Android Adam said:
Thank you so much. I installed Lineage OS from https://forum.xda-developers.com/pr...i-lineageos-16-0-gsi-arm64-ab-how-to-t3908029 and my phone is working HOWEVER I can't read battery usage from setting but /data/system/batterystats.bin exists
Click to expand...
Click to collapse
I would try the one I linked to. It is the most likely to have everything working. Descendant two dot two
The one you're trying to use says it's extremely specific to his device. Majorly buggy for others. Including A only devices.
Android Adam said:
Thank you so much. I installed Lineage OS from https://forum.xda-developers.com/pr...i-lineageos-16-0-gsi-arm64-ab-how-to-t3908029 and my phone is working HOWEVER I can't read battery usage from setting but /data/system/batterystats.bin exists
Click to expand...
Click to collapse
Did you ever manage to get battery to work? Mine doesn't either nor does the USB-C port
Sorry I need help installing the ROM GSi RR I get an error in the text of insufficient space and I get error 70 to someone else happens? And I tried to fix the problem and when I managed to install the gapps the phone did not start someone can help me?
ACM1PT said:
Sorry I need help installing the ROM GSi RR I get an error in the text of insufficient space and I get error 70 to someone else happens? And I tried to fix the problem and when I managed to install the gapps the phone did not start someone can help me?
Click to expand...
Click to collapse
Please link to the rom so I can try to help. describe what you're trying to do
Android Adam said:
Please link to the rom so I can try to help. describe what you're trying to do
Click to expand...
Click to collapse
Could you give me a guide on how to install with gapps? Sorry I have to write in English everything I did my language is Spanish sorry
ACM1PT said:
Could you give me a guide on how to install with gapps? Sorry I have to write in English everything I did my language is Spanish sorry
Click to expand...
Click to collapse
I need to know which rom you are using. Please post a link to it. Is this it https://www.google.com/amp/s/forum....urrection-remix-v7-0-arm64-32-b-t3891636/amp/
Android Adam said:
I need to know which rom you are using. Please post a link to it. Is this it https://www.google.com/amp/s/forum....urrection-remix-v7-0-arm64-32-b-t3891636/amp/
Click to expand...
Click to collapse
Are you using Oreo or pie
Android Adam said:
Are you using Oreo or pie
Click to expand...
Click to collapse
pie bro,
I will try to install again have it happen
ACM1PT said:
pie bro,
I will try to install again have it happen
Click to expand...
Click to collapse
I found the problem. The system partition is too small so GApps always fails. To solve it go to twrp adb push your rom, and flash it. Then go to format then system hit repair then resize and confirm. Of you are flashing a big GApps (Super) do it again. Flash GApps then Magisk (for root) then you're done