FRP LOCK (GREEN)
PHONE LOCK(GREEN)
System Version: 8.0(Oreo)
VTR-L09C432B360 (8.0.0.360)
system not work
erecovery method can't use without modem(not able change dns).
Stock recovery
and when flash twrp.
C:\Users\vincenzo\Desktop\platform-tools>fastboot flash recovery_ramdisk TWRP8_3.0.3.img
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (9780 KB)...
OKAY [ 0.449s]
writing 'recovery_ramdisk'...
FAILED (remote: Command not allowed)
finished. total time: 0.463s
how to unbrick ?
"fastboot oem-unlock YOUR CODE" doesn't unlock your phone?
Does the normal update method via wifi, without FubkyHuawei or Firmware Finder, work?
If not and if you're not able to change the DNS you can either open a hotspot on your PC, if it has the ability, for using FubkyHuawei (they have a quiet good tutorial for this).
Or you need to buy credits for DC Phoenix.
Without buy is possibile?
Oem unlock can t work because frp Locked..
Related
Hello Guys im attempting to install TWRP 3.0.2 on my Moto X 2nd Gen 2014 with Android 6.0 Official but im getting an error in my command prompt. I have already attempt to request and an unlock code for unlocking the bootloader but motorolas site state my phone is not authorize for unlocking it. Does my phone need to have boot loader unlocked to be able to follow this step? Im pretty much attempting to install this recover to be able to root following this method: http://forum.xda-developers.com/moto-x-2014/development/root-root-moto-x-2014-android-t3249105
C:\Users\****\AppData\Local\Android\sdk\platform-tools>fastboot flash recovery C:\Users\****\AppData\Local\Android\sdk\platform-tools\twrp-3.0.2-1-victara.img
(bootloader) has-slot:recovery: not found
target reported max download size of 536870912 bytes
sending 'recovery' (9160 KB)...
OKAY [ 0.329s]
writing 'recovery'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.356s
Click to expand...
Click to collapse
Yes, the bootloader needs to be unlocked to install a custom recovery (which is stated prior to the first step in the thread you mentioned). At one time there was an"unofficial" bootloader unlock that you might look into.
Hi,
I am trying to follow the instruction on http://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903 to debrand Vodafone UK P9 and then apply correct oeminfo to restore Android Pay functionality. I unlocked the bootloader and installed TWRP using SRK Tool.
Now when trying to flash oeminfo as sugested I am getting:
Code:
fastboot flash oeminfo oeminfo.img
target reported max download size of 471859200 bytes
sending 'oeminfo' (65536 KB)...
OKAY [ 1.451s]
writing 'oeminfo'...
FAILED (remote: Command not allowed)
finished. total time: 1.462s
Enable OEM Unlock is on in Developer options.
Stuck with this one. What am I doing wrong? Do I need to root the device?
Problem oeminfo
Hello, i have the same problem.
The phone is unlockeed but not root and not have twrp.
Hoow can i resolve this ?
Thank you.
Alessandro.
delta-bravo said:
Hi,
I am trying to follow the instruction on http://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903 to debrand Vodafone UK P9 and then apply correct oeminfo to restore Android Pay functionality. I unlocked the bootloader and installed TWRP using SRK Tool.
Now when trying to flash oeminfo as sugested I am getting:
Code:
fastboot flash oeminfo oeminfo.img
target reported max download size of 471859200 bytes
sending 'oeminfo' (65536 KB)...
OKAY [ 1.451s]
writing 'oeminfo'...
FAILED (remote: Command not allowed)
finished. total time: 1.462s
Enable OEM Unlock is on in Developer options.
Stuck with this one. What am I doing wrong? Do I need to root the device?
Click to expand...
Click to collapse
you need to root your device.
hi my devices is bricked and need to convert it to global version
pe-TL10v100c00
so i wana change it from chaina version to global but it's bricked and just fastboot mode work
i have oem ino.img and sys.img and cust.img and recovery.img
but oeminfo.img show error which friend up show that!
how must i do it?
Hi all,
I have an incorrect firmware installed for my P10 and lots of things are not working (oreo 8.0). I want to re-flash or rollback to other firmwares but problem is I can't get into TWRP anymore. flashing it doesn't work and although I see in fastboot Phone Unlocked and FRP unlock i have the idea it has to do with the OEM unlock not working properly. It's also not available in the developer options. What;s exactly the link to huawei's page where you can request your phone unlock ID ?
Thanks
Whats not working ?
What is it saying when flashing something through fastboot ?
virusdunil said:
Whats not working ?
What is it saying when flashing something through fastboot ?
Click to expand...
Click to collapse
When I go into the bootloader and want to flash TWRP I get following message:
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (16494 KB)...
OKAY [ 0.552s]
writing 'recovery_ramdisk'...
FAILED (remote: Command not allowed)
finished. total time: 0.566s
What is the ADB command youre using ?
virusdunil said:
What is the ADB command youre using ?
Click to expand...
Click to collapse
fastboot flash recovery_ramdisk twrporeo.img
and my twrp oreo name is twrporeo.img
Thats why its not working...
TRY....... fastboot flash ramdisk twrporeo.img
virusdunil said:
Thats why its not working...
TRY....... fastboot flash ramdisk twrporeo.img
Click to expand...
Click to collapse
Same problem...:
C:\Android>fastboot flash ramdisk twrporeo.img
target reported max download size of 471859200 bytes
sending 'ramdisk' (16494 KB)...
OKAY [ 0.532s]
writing 'ramdisk'...
FAILED (remote: Command not allowed)
finished. total time: 0.546s
i did a mistake...its really recovery_ramdisk
Look Here...
TWRP
virusdunil said:
i did a mistake...its really recovery_ramdisk
Look Here...
TWRP
Click to expand...
Click to collapse
I already tried that but no success. Did a factory reset and now the bootloader is locked again. How can I unlock the bootloader again?
Thanks
1-is your phone working now ?
for bootloader unlock,do what you did first time... fastboot oem unlock yourcode123
how did you get the last update ?....firmware finder ?
virusdunil said:
1-is your phone working now ?
for bootloader unlock,do what you did first time... fastboot oem unlock yourcode123
how did you get the last update ?....firmware finder ?
Click to expand...
Click to collapse
First of all, I've tried to update from Nougat to Orea via Blackballs method in this thread https://forum.xda-developers.com/p10-plus/development/oreo-update-thread-l29c432-t3729907 with the firmware mentioned there
What is not working:
I've managed to do the first part (oreo install), but:
- SImcard has 'No service
- Can't flash TWRP
- Bootloader / phone locked in Fastboot
- I can't remember how I unlocked the P10 last year (I have a P10 L09-VTR, rebranded to L29-VTR and now 'working' on a VKY P10 plus rom)
Hi all...I am looking for this amazon firmware for the xt1900-1. I have a corrupted phone and the bootloader can not be unlocked, my only choice afaik is to fastboot with the identical or newer firmware, and I have been unable to find either. Thanks in advance!
Bigbird521 said:
Hi all...I am looking for this amazon firmware for the xt1900-1. I have a corrupted phone and the bootloader can not be unlocked, my only choice afaik is to fastboot with the identical or newer firmware, and I have been unable to find either. Thanks in advance!
Click to expand...
Click to collapse
https://mirrors.lolinet.com/firmware/moto/payton/official/AMZ/
Here's my error:
fastboot flash boot boot.img
target reported max download size of 536870912 bytes
sending 'boot' (22253 KB)...
OKAY [ 0.484s]
writing 'boot'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.956s
Hey all, new poster but long time user of the site, just never needed an account until today lol. Anyways, just got a Pixel 5a5G that I am trying to install LineageOS on. I am following the instructions from here, and once I get to the point of flashing the vendor_boot partition, I receive this:
Code:
PS C:\Windows\system32> fastboot flash vendor_boot C:\Users\bobby\Downloads\vendor_boot.img
target reported max download size of 268435456 bytes
sending 'vendor_bootb' (98304 KB)...
OKAY [ 2.225s]
writing 'vendor_bootb'...
FAILED (remote: Not allowed to flash (vendor_bootb))
finished. total time: 2.307s
When running fastboost unlock bootloader, I receive this:
Code:
PS C:\Windows\system32> fastboot flashing unlock
...
(bootloader) Device already unlocked
OKAY [ 0.055s]
finished. total time: 0.056s
I have reflashed the stock firmware with the Android Flashing Tool to 13.0.0, both keeping the bootloader locked and unlocked. I have tried unlocking and relocking the bootloader. I used the utility's "full-flash" feature to flash both partitions, all to no avail. Research on here seems to point that the bootloader is locked, but fastboot says it isn't, settings is greyed out saying the bootloader is already unlocked, and fastboot mode on the phone says Device state: unlocked.
Any ideas?
Did you remove your screenlock and Google account before flashing?
Leberkuchen said:
Did you remove your screenlock and Google account before flashing?
Click to expand...
Click to collapse
Yes. I've flashed from a factory install with no passcode or account ever set. Same issue
From the output it's trying to write vendor_bootb??? Some combination of this should fix it:
-Make sure to use platform tools r33.0.3, the latest r34 has at least one known problem with fastboot and I don't trust it
-If you're using powershell you have to run the command as .\fastboot flash you can only run fastboot flash if you are in cmd
-Make sure both slots are on latest February firmware (probably not really necessary but a last ditch effort)