Hi all
I have been looking around and browsed all similar threads but I have not found an answer
Can anyone that uses MI Mix on Verizon (successfully) with working data, calls and SMS help me.
Like tell me what ROM are you using, APN (if manually input), VoLTE on/off, what network mode is it on (CDMA-UMTS..etc)
I cannot get for the life of me to get it to work correctly. I have tried all the Lineage variations posted here and I can either have calls and no data or "No service"
Was thinking to try MIUI 9.5.1 since it just came out but I do not want any of the chinese apps that I won't use or menus half translated.
I will really appreciate any help.
Thank you
I am able to get Messaging and Data successfully, but no incoming or outgoing calls. I spent two days with their advanced Global support only to hear the IMEI isn't compatilble with Verizon. Then why does the data and messaging work?
I have a mi mix and Verizon work fine in my phone no problem everything works
It'll work if you live in an area with Verizon Band 4.
Related
I'm experiencing issues with VOLTE on T-Mobile. My phone switches immediately from an LTE+ DATA connection to HSPA the moment a call is placed. Of course, VOLTE is enabled on the settings side. I'm running an unmodified system, upgraded to PIE.
I've been on the phone with T-Mo to make sure the APN is correct (nothing special to mention here). I've also tried different connection combinations using the *#*#4636#*#* with different results but, even though the phone connects really fast to DATA (LTE+), I cannot get VOLTE to function in any case. On the other hand, WiFi calling works just fine.
On a chat with Razer, they just told me that VOLTE is unstable with T-Mobile and, to disable the function altogether from settings.
Before I give up, I'm asking the geniuses here for ideas or experiences? Any ideas anyone?
cabegol said:
I'm experiencing issues with VOLTE on T-Mobile. My phone switches immediately from an LTE+ DATA connection to HSPA the moment a call is placed. Of course, VOLTE is enabled on the settings side. I'm running an unmodified system, upgraded to PIE.
I've been on the phone with T-Mo to make sure the APN is correct (nothing special to mention here). I've also tried different connection combinations using the *#*#4636#*#* with different results but, even though the phone connects really fast to DATA (LTE+), I cannot get VOLTE to function in any case. On the other hand, WiFi calling works just fine.
On a chat with Razer, they just told me that VOLTE is unstable with T-Mobile and, to disable the function altogether from settings.
Before I give up, I'm asking the geniuses here for ideas or experiences? Any ideas anyone?
Click to expand...
Click to collapse
I hope this can be figured out. Im waiting for my Razer 2 phone delivery and also on T-Mobile. What OS are you running? Android Pie?
Yes, I'm on Pie.
Good news! with today's update (3-20-2019), my phone is using VOLTE technologies to connect audio calls. Phone calls sound immensely better now (the "HD" icon shows up during the call and the "LTE+" connection indicator in the status bar remains through the call).
Hello!
I hope someone can help me with this "little" problem that I'm experimenting with my Xiaomi mi 9T Pro running MIUI Global 10.3.3.0 (Stock) I checked everything before buying and the phone is fully compatible with my carrier (I'm from Venezuela), however, I noticed that when the phone is on 4G it switches to 3G/H/H+ in order to make/receive calls (which is pretty normal since my carrier does not support VoLTE). The problem comes when there is an incoming call, it should switch automatically to 3G/H/H+ BUT it does not happen all the time, in fact, I can say that it only happens 25% of the time when I was testing, of course, when it does not happen there is no way to receive the incoming call.
So far I tried:
- Forcing the phone to stay on 3G (everything works great)
- Testing the different network options (it switches from 4G to 3G but not always and it should)
- Switching from SIM slot 1 to slot 2
- At the moment the preferred network type LTE/TD-SCDMA/UMTS
Could it be a software issue? or could it be related to my carrier? I haven't tried using a SIM card from another carrier.
After all, I bought a PHONE that does not behave like an actual phone all the time, so, I hope someone can help me with this.
Thanks in advance.
Note: I noticed that I might be posted on the wrong section, I'm sorry for that.
Hello!
I hope someone can help me with this "little" problem that I'm experimenting with my Xiaomi mi 9T Pro running MIUI Global 10.3.3.0 (Stock) I checked everything before buying and the phone is fully compatible with my carrier (I'm from Venezuela), however, I noticed that when the phone is on 4G it switches to 3G/H/H+ in order to make/receive calls (which is pretty normal since my carrier does not support VoLTE). The problem comes when there is an incoming call, it should switch automatically to 3G/H/H+ BUT it does not happen all the time, in fact, I can say that it only happens 25% of the time when I was testing, of course, when it does not happen there is no way to receive the incoming call.
So far I tried:
- Forcing the phone to stay on 3G (everything works great)
- Testing the different network options (it switches from 4G to 3G but not always as it should)
- Switching from SIM slot 1 to slot 2
- At the moment the preferred network type is LTE/TD-SCDMA/UMTS (default)
Could it be a software issue? or could it be related to my carrier? I haven't tried using a SIM card from another carrier.
After all, I bought a PHONE that does not behave like an actual phone all the time, so, I hope someone can help me with this.
Thanks in advance.
Thank you, I almost thought I was the only one.
I bought my Xiaomi mi 9T Pro running MIUI Global 10.3.3.0 (Stock) a week ago and I have the same symptoms like you.
Im on A1 Network in Austria running default network settings and I realized after hours I couldn't make calls (and obviously did't receive any).
This is the first phone I had this network problems, and I am on A1 network for 20 years with different phones....
I hope someone can share some light why this happens and what are the best settings for European (Austrian) A1 network.
Trying to switch to LTE/UMTS, but that setting is always reset to the default above after reboot.
As its also my work phone it would be very bad not recognizing for hours that I'm not reachable...
Thank you !
A1 supports VoLTE, try to enable it on your phone, I have no issues running a dual SIM config with A1 and 3 .....
pietropizzi said:
Thank you, I almost thought I was the only one.
I bought my Xiaomi mi 9T Pro running MIUI Global 10.3.3.0 (Stock) a week ago and I have the same symptoms like you.
Im on A1 Network in Austria running default network settings and I realized after hours I couldn't make calls (and obviously did't receive any).
This is the first phone I had this network problems, and I am on A1 network for 20 years with different phones....
I hope someone can share some light why this happens and what are the best settings for European (Austrian) A1 network.
Trying to switch to LTE/UMTS, but that setting is always reset to the default above after reboot.
As its also my work phone it would be very bad not recognizing for hours that I'm not reachable...
Thank you !
Click to expand...
Click to collapse
Hi! It feels better knowing that I'm not alone.
The fact is that I can actually make calls (it take from 3 to 5 seconds switching from 4G to 3G/H), the problem comes when there is an incoming call, sometimes it works (it switches to 3G/H and when the call is ended, it switches back to 4G) but most it does not. I just tried LTE/UMTS and it does work but not for long, I can see that it happens and sometimes it does not. I found a "solution" which involves forcing to 3G/H but it's not the point, there should be a real solution. At this moment, I haven't found a correct network configuration, all the ones that I've tried just have worked for me for some time, and then the problem is back without even rebooting the phone. Could it be caused by a faulty SIM or it's just a network/carrier issue? I don't want to think that it's a hardware issue.
error23 said:
A1 supports VoLTE, try to enable it on your phone, I have no issues running a dual SIM config with A1 and 3 .....
Click to expand...
Click to collapse
Whats your ROM Version ?
I alreaddy tried to enable VoLTE, I can switch it on and the VoLTE Symbol appears.
The problem is - I have no caller ID. I don't even see the phone number when someone calls me ("unbekannter Anrufer" - "unknown caller")
That's not conveniant, so as soon as I switched OFF VoLTE caller recognition was enabled again.
Is VoWIFI working at you with A1 ? I can enable it but I don't get the symbot at home in my WIFI network.
So for now I see two options:
- the correct (stable) network configuration for Austria that persist in the phone configuration
- enabling VoLTE but with a solution for a working caller ID
I finally got found the solution
Problem is the notification settings.
This was somehow reset after the update to mui 11.
To fix the issue:
1. Go to settings
2. Click notification
3. Click the notification badges (3rd icon)
4. Find the "phone" icon
5. Enable the show notification
6. Exit to settings and test
Having same problem
Can someone help me I am from Malta and have Xiaomi mi9t pro and from last night stopped receiving calls and incoming . Tried with sim 1 and it worked but it happened again . I tried the notification settings but still the same problem .
I had trouble not receiving calls also...
After looking here, and also on YouTube, I started going through my phone again. I too was not getting my calls a lot, but I have only had my phone maybe 2 weeks, so there's not much on it yet. One thing I am always adding is themes. The theme feature is it's own pre installed app as I'm sure we've all seen. Different one's have been doing/blocking certain features at times on my phone. My husband's calls were being sent to voicemail, and some other important calls. I noticed the other day when I tried a new theme it locked me out of my phone with no preface to get back to the lock screen. I had to take a picture and select send to get back to the lock screen. Remembering this, I decided to go back to the original developer theme for the phone. My phone now rings. Original developer mode also controls the call feature, not just the theme, which I did not know or read until now. Going back to it I believe kind of reset my configuration. I would say give this a try for sure. Hope it helps someone else I love my phone and didn't want to lose it. FYI, I am on TMobile network in the USA.
Hi!
I have a very similar problem on a xiaomi redmi note 8t. I tried various settings, but failed. This is annoying because the phone is relatively new. I think it is a hardware problem.
Saulor said:
Hello!
I hope someone can help me with this "little" problem that I'm experimenting with my Xiaomi mi 9T Pro running MIUI Global 10.3.3.0 (Stock) I checked everything before buying and the phone is fully compatible with my carrier (I'm from Venezuela), however, I noticed that when the phone is on 4G it switches to 3G/H/H+ in order to make/receive calls (which is pretty normal since my carrier does not support VoLTE). The problem comes when there is an incoming call, it should switch automatically to 3G/H/H+ BUT it does not happen all the time, in fact, I can say that it only happens 25% of the time when I was testing, of course, when it does not happen there is no way to receive the incoming call.
So far I tried:
- Forcing the phone to stay on 3G (everything works great)
- Testing the different network options (it switches from 4G to 3G but not always as it should)
- Switching from SIM slot 1 to slot 2
- At the moment the preferred network type is LTE/TD-SCDMA/UMTS (default)
Could it be a software issue? or could it be related to my carrier? I haven't tried using a SIM card from another carrier.
After all, I bought a PHONE that does not behave like an actual phone all the time, so, I hope someone can help me with this.
Thanks in advance.
Click to expand...
Click to collapse
I have the same issue here in same phone but on EU MIUI 12.0.3.0 .. with the same symptoms u described .. i suspected in sim card and i replaced it with a new one and the issue still there .. did u find a solution for this issue?
I'm not sure if this is the same issue as what's described by OP, but it's somewhat similar (not receiving calls). Sometimes my colleagues will call me on Whatsapp and state that they're unable to reach me via the cellular network. This is what fixed it for me:
Settings - SIM cards & mobile networks - Select your sim card - turn off 'use volte (use volte to improve the quality of voice calls)'
scarmage said:
I'm not sure if this is the same issue as what's described by OP, but it's somewhat similar (not receiving calls). Sometimes my colleagues will call me on Whatsapp and state that they're unable to reach me via the cellular network. This is what fixed it for me:
Settings - SIM cards & mobile networks - Select your sim card - turn off 'use volte (use volte to improve the quality of voice calls)'
Click to expand...
Click to collapse
I tried this option and also not working the issue still there since 10 daysi also tried
Settings all specs then internal storage then sim 1 then change the setting to gsm only
After that the line working for 10 min and then again i can't receive calls or make ones
I have the same problem i have a redmi note 9 pro, i can't receive calls in 4G, i only can receive calls in Edge someone could resolve this? I tried all of these methods but nothing works
Bought a global version and was setting it up. MVNO's APN was already there, so just used it.
Tried to register some apps, but realised no SMS or calls can come through. Tried sending a SMS and also no luck.
Data works just fine and I tripled checked band frequencies to ensure my MVNO and the X2 Pro were compatible. (If anyone wants to check, it's UQ Mobile).
Asked on Reddit and was pointed here. Is there anything I can do or should I just accept that I only have data?
Hey so I've had my Rog phone 3 for over 3 months now, updated to A12. A constant problem has been the mobile network. Works fine for WhatsApp, but for normal browser (different browsers), other apps requiring internet, though the mobile data is on, it acts like it's offline, showing offline. I have to toggle on and off airplane mode for it to eventually work. Then if I turn off mobile data and turn back on, the cycle repeats. Please help
I'm having the same issue here too. The A12 Beta had choppy Network Connectivity that would just crumple my phone and not allow me to use Communications or Data, the random disconnects were absolutely infuriating, and after updating to the stable build, it was just not allowing Mobile Communication at all. (No Incoming or Outgoing calls)
I'm extremely happy about the downgrade FW however to allow me to revert to A11 that at least allows my phone to function as intended, even if I cannot enjoy the update that A12 has to offer.
Downgrading from A12 to A11 is an Upgrade. A12 has little to offer beyond making your OS look like a kindergarten app ...
Upgraded to A12 last night with the OTA. Data is fine but I cannot make calls, network immediately drops. no other issues with the phone though, 4g data works.5g never worked but volte did (At&t network) VoLte doesn't show up and I cannot find a place to enable it however there is a toggle for it in notifications. I spent about 3 hours at AT&T. So. here is info if it helps anyone. They told me that the phone is somehow locked to 3g calling even though the sim card shows LTE voice. After the update only calls dont work. The guy said he helped me before by provisioning an older sim card and using VoLte, however from what i understand The phone Does support more than 3g voice but if someone can correct me that would be cool. Also I found out if I put a sim card from an ATT iPhone it will connect at 5g (20mbps speed tested). I said well if I lose voice and have to figure out a wifi calling plan I would rather do it with 5G, however when they provisioned a 5G sim for me on my account it wont link above 4g+ (1-3mbps) same tower. So im at a loss. I know part of it is the new android 12 update, I know some of it is the stupid account provisioning and i know some is the phone. I DO NOT know what is what so any help would be awesome. If there is some way to add VoLte back to the phone in android 12, flash a new radio or something... but if someone can shed some light onto what is really happening so I know where I can press that would be slick. if the phone does communicate through something other than 3g voice then I can push back on At&t but i have kept this "less" a development platform and more a daily driver. I guess that has to now change LOL!
Andrologic said:
Downgrading from A12 to A11 is an Upgrade. A12 has little to offer beyond making your OS look like a kindergarten app ...
Click to expand...
Click to collapse
How can I downgrade. This new update is killing me
TheMightyElk said:
Upgraded to A12 last night with the OTA. Data is fine but I cannot make calls, network immediately drops. no other issues with the phone though, 4g data works.5g never worked but volte did (At&t network) VoLte doesn't show up and I cannot find a place to enable it however there is a toggle for it in notifications. I spent about 3 hours at AT&T. So. here is info if it helps anyone. They told me that the phone is somehow locked to 3g calling even though the sim card shows LTE voice. After the update only calls dont work. The guy said he helped me before by provisioning an older sim card and using VoLte, however from what i understand The phone Does support more than 3g voice but if someone can correct me that would be cool. Also I found out if I put a sim card from an ATT iPhone it will connect at 5g (20mbps speed tested). I said well if I lose voice and have to figure out a wifi calling plan I would rather do it with 5G, however when they provisioned a 5G sim for me on my account it wont link above 4g+ (1-3mbps) same tower. So im at a loss. I know part of it is the new android 12 update, I know some of it is the stupid account provisioning and i know some is the phone. I DO NOT know what is what so any help would be awesome. If there is some way to add VoLte back to the phone in android 12, flash a new radio or something... but if someone can shed some light onto what is really happening so I know where I can press that would be slick. if the phone does communicate through something other than 3g voice then I can push back on At&t but i have kept this "less" a development platform and more a daily driver. I guess that has to now change LOL!
Click to expand...
Click to collapse
Any developments on this? I am having the same issue.
Mine seems to lose connectivity after returning from do not disturb or when I'm inside with no signal for a while. I have to toggle airplane mode for sec, then I can use the phone. My wife texts me a few times a week, "It's going straight to voicemail again.", then I toggle it and call her. It will work fine for the rest of the day. Doesn't happen every time, though. Bizarre, though most of the time it's in the morning after returning from do not disturb mode. Kind of a hassle, but I'm coping. I'm going to start logging when it happens to see if any settings may be causing this.