Unbrick P9 Eva-L19 or where to get logic board - Huawei P9 Questions & Answers

Hi guys
I've mistakenly (I guess) placed an update.zip in dload folder from the internal memory.
When I booted it with key combo to force update from there, it reaches 5% and then I get an error regarding it does not correspond with original version
When I boot it I have 2 options
- Huawei erecovery, where I get it failed through WiFi
- Wipe data or factory reset, which cannot be done
After this I tried getting original ROMs, placed them in dload folder from sdcard, and I get same error as before. So I think it is not taking into consideration the files from there and I think it is still trying to update from internal memory
It had version B605C135
Then it went to b605c135custD003 or 007 and the problems started from there
My questions would be
Is there any procedure to unbrick and make it work again? ... or...
I was told in repair stores to replace the logic main board, but I cannot find a place to buy it. Does anyone know where I could find this spare part?
Thanks a lot in advance [emoji847]
Enviado desde mi ONE A2005 mediante Tapatalk

kabeza said:
Hi guys
I've mistakenly (I guess) placed an update.zip in dload folder from the internal memory.
When I booted it with key combo to force update from there, it reaches 5% and then I get an error regarding it does not correspond with original version
When I boot it I have 2 options
- Huawei erecovery, where I get it failed through WiFi
- Wipe data or factory reset, which cannot be done
After this I tried getting original ROMs, placed them in dload folder from sdcard, and I get same error as before. So I think it is not taking into consideration the files from there and I think it is still trying to update from internal memory
It had version B605C135
Then it went to b605c135custD003 or 007 and the problems started from there
My questions would be
Is there any procedure to unbrick and make it work again? ... or...
I was told in repair stores to replace the logic main board, but I cannot find a place to buy it. Does anyone know where I could find this spare part?
Thanks a lot in advance [emoji847]
Enviado desde mi ONE A2005 mediante Tapatalk
Click to expand...
Click to collapse
Try doing what I did when I was having issues installing the stock rom. https://forum.xda-developers.com/showpost.php?p=75788148&postcount=13

thedarkinvader said:
Try doing what I did when I was having issues installing the stock rom. https://forum.xda-developers.com/showpost.php?p=75788148&postcount=13
Click to expand...
Click to collapse
How could I Flash (as you quote)
I flashed BOOT.img, SYSTEM.img, RECOVERY.img, and RECOVERY2.img from the stock B381
Click to expand...
Click to collapse
..Without having usb debugging on?
I mean, phone does not have USB debugging on and I guess I won't be able to do anything without it, right?
Any clues about how to enable it from recovery or anywhere? Thanks again
Some images
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Try to recover with dload folder with UPDATE.APP (in update.zip from differrent FULLOTA versions) insided, by press and hold: Vol Up + Vol Down + Power buttons.
I have an EVA-L19C636 and it's worked and recovered with B320 version only.

Oh I see. The bootloader's locked. Just curious though, why is wiping and restoring to factory data not working?

thedarkinvader said:
Oh I see. The bootloader's locked. Just curious though, why is wiping and restoring to factory data not working?
Click to expand...
Click to collapse
I guess because I didn't put the right version in the dload folder :crying:

kabeza said:
I guess because I didn't put the right version in the dload folder :crying:
Click to expand...
Click to collapse
I'm not sure what that means, but can you post screenshots of your recovery? You should be able to access that by pressing Vol+ and Power at the same time.
At this point, I think what you should see are options to wipe and all. Can you also post pictures on what happens when you select either? And have you tried unlocking the bootloader through ADB?
The goal I have in mind at this point is for the device to be able to boot so that you can access the Settings app

I've finally paid DC Phoenix flash software license
Tried EVA-L19_C432B360_Firmware_Austria_Poland_Hungary_Bulgaria_Czech_Republic_Nonspecific.APP
And voila, it unlocked bootloader, unlocked frp, did everything and unbricked the phone
Now have to test network bands, etc.
But this is an advance

Related

[Q] Please help savage my Z1

So the other day I confirmed for an OTA update for my Z1. Little did I know, 3 seconds and an auto shut down later, I would end up with my Z1 being stuck in a bootloop with no access to recovery mode.
I really need help on getting my Z1's internal memory (photos, notes, contacts) extracted. I tried a few of the local repair shops and they said that the data inside is corrupted.
I've try ADB but it says "permission denied" whenever I try getting in the storage>sdcard. Probably due to me putting a swipe pattern lock screen on it.
So if there's any hope at all, I'm willing to even disassemble it if that could even help.
I've not rooted it but I do believe the bootloader is unlocked.
- I should also mention I'm a real amateur at this stuff so please be very patient and specific with the instructions. Thanks!
Try using this guide: http://www.ibtimes.co.uk/how-instal...z3-z2-devices-via-xperifirm-flashtool-1492498
it's for updating your os with flash tool just use an ftf file for z1. And in the final stage of the update untick the 3 wipe options and this should save your data.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i'm not totally sure this will work, depends on how much your memory is ruined. If it was just an installation of your os error this should reinstall an updated os without erasing data. first try other methods for saving your data and if you won't find any, try this one
btw, in the picture i posted i didnt untick those 3 wipe options, don't forget to untick them else you'll wipe your memory!!!
silentmax24 said:
Try using this guide: http://www.ibtimes.co.uk/how-instal...z3-z2-devices-via-xperifirm-flashtool-1492498
it's for updating your os with flash tool just use an ftf file for z1. And in the final stage of the update untick the 3 wipe options and this should save your data.
i'm not totally sure this will work, depends on how much your memory is ruined. If it was just an installation of your os error this should reinstall an updated os without erasing data. first try other methods for saving your data and if you won't find any, try this one
Click to expand...
Click to collapse
I tried with all 3 available firmware (SG) but still not able to boot up the phone normally, nor was I able to access the memory through adb. Any other thoughts on that?
qazamy said:
I tried with all 3 available firmware (SG) but still not able to boot up the phone normally, nor was I able to access the memory through adb. Any other thoughts on that?
Click to expand...
Click to collapse
give it a try..since ur bootloader was already unlock flash kernel and boot into twrp, then connect ur phone, now in ur computer u can now see the storage of ur mobile, look for the pics u've been talking about, in DCIM folder, for the notes i dont know the path..hehe
mizukage said:
give it a try..since ur bootloader was already unlock flash kernel and boot into twrp, then connect ur phone, now in ur computer u can now see the storage of ur mobile, look for the pics u've been talking about, in DCIM folder, for the notes i dont know the path..hehe
Click to expand...
Click to collapse
Do you have like a more specific step-by-step guide of what you're talking about?
qazamy said:
Do you have like a more specific step-by-step guide of what you're talking about?
Click to expand...
Click to collapse
1. dl kernel for lolli if ur on lolli and vice versa
2. unpack/ectract it and lookg for boot.img
3. run flashtool and select fastboot mode look for the boot.img [dont flash it yet]
4. device is turned off, connect it into fastboot mode and flash.
5. click reboot into system and keep pressing vol down until u go into recovery
connect ur device and u will see ur mobile into ur computer that it was detected, now browse for the pics that u wanted to back up
qazamy said:
So the other day I confirmed for an OTA update for my Z1. Little did I know, 3 seconds and an auto shut down later, I would end up with my Z1 being stuck in a bootloop with no access to recovery mode.
I really need help on getting my Z1's internal memory (photos, notes, contacts) extracted. I tried a few of the local repair shops and they said that the data inside is corrupted.
I've try ADB but it says "permission denied" whenever I try getting in the storage>sdcard. Probably due to me putting a swipe pattern lock screen on it.
So if there's any hope at all, I'm willing to even disassemble it if that could even help.
I've not rooted it but I do believe the bootloader is unlocked.
- I should also mention I'm a real amateur at this stuff so please be very patient and specific with the instructions. Thanks!
Click to expand...
Click to collapse
1. try flash ftf again, unstick applog and data, stick on cache ( wipe cache). try several times maybe it will bootup.
2. you sure your bootloader is unlocked ?
use flashtool to check your bootloader status, if it really unlocked just flash a custom kernel have build in recovery to save your data.
if it is locked bootloader, you can unlock via flashtool, it wont wipe you data like fastboot unlock, and flash kernel but you will lose your sony function forever if you dont have any TA backup before. you should consider to choose your data or sony function.
Are you sure your bootloader is unlocked?
Dude, Are you sure that your bootloader is unlocked?
1st confirm that and accordingly there are ways by which you can recover your data.
Guys here have already recommended methods by which you can get your data back. I suggest read through general an Q&A forums. Read thread for soft bricking. Do not panic and carefully follow the instructions. You should get your data back.
similar case has happened with me few times and I was sucessfully able to get my data back.. so dont worry..

Mate S L09 Stuck on Huawei logo

I have sold my Mate S L09 in perfect working state,but the buyer returned it tom e.
The phone boots but get stuck on Huawei logo and want go further,
Ik can get into TWRP and Fasboot mode and even in stock recovery when it's connected to PC.
In fastboot mode and connected to pc and i type Fastboot Devices it shows up.
I have downloaded a suitable stock rom in Update.zip format but cant flash it since i can't get in the phone.
So im looking for a rom that can be flasht with TWRP
Someone who have such a rom or a Nandroid back up,would be very greatful.
Or another soution to make the phone work again ,
Please help
Edit:
When i try to make a backup with TWRP it says NO OS INSTALLED.
What can i do ? Flash stock recovery ?
Flash stock recovery . save stock rom to micro SD card and flash it . if fastboot works it should work.
Отправлено с моего HUAWEI CRR-L09 через Tapatalk
yevgeni.raber said:
Flash stock recovery . save stock rom to micro SD card and flash it . if fastboot works it should work.
Отправлено с моего HUAWEI CRR-L09 через Tapatalk
Click to expand...
Click to collapse
Thanks, can you explain the steps i have to take ? whitch files i have to flash and what are the commands
I have d.load map with UPDATE.APP in it ,how to flash in fastboot ? I have no .img files
SOLVED !!!
Did it by placing the dload map with UPDATE APP in it os sd card, flashed via fasfboot stock recovery ,booted up with volume up +volume down togheter and then power button.
Upgrade started and after finish i got red exclamation mark :failed. After second attempt ,the same.
After a minute or so i was surprised,suddenly on the phone the language settings popped up. Me and buyer happy
ludoke said:
SOLVED !!!
Did it by placing the dload map with UPDATE APP in it os sd card, flashed via fasfboot stock recovery ,booted up with volume up +volume down togheter and then power button.
Upgrade started and after finish i got red exclamation mark :failed. After second attempt ,the same.
After a minute or so i was surprised,suddenly on the phone the language settings popped up. Me and buyer happy
Click to expand...
Click to collapse
Can you explain verbatimly what you did for a fix?
I am having the same problem with the European model. Every install leaves me with this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I made the same mistake. You have to disconnect USB to update through UPDATE.APP
LNK|82 said:
I made the same mistake. You have to disconnect USB to update through UPDATE.APP
Click to expand...
Click to collapse
Tried your advice and when it booted into a bootloop of the Huawei pink logo.
FIXED: Ended up using MM goodness.
cooltranier13px said:
Tried your advice and when it booted into a bootloop of the Huawei pink logo.
Click to expand...
Click to collapse
how did you fix this mate ? i had b146 and i tried to update to b303 but i'm getting a pink Huawei bootloop
clsheppard said:
how did you fix this mate ? i had b146 and i tried to update to b303 but i'm getting a pink Huawei bootloop
Click to expand...
Click to collapse
Just update to MM. You should be fine if you are using stock.

unlock the bootloader (Unofficial free way)

While searching for a way to unlock the bootloader i found a way
​Hello. Instructions for unlocking the bootloader.
-------------- Responsibility for your bricks I do not take over. Everyone does at their own peril and risk .--------------
Downloa ( Google)
1) Install the driver for the phone (in the header);
2) Install a special driver, find it in the Unlock_BootLoader \ Driver for Winwos \ DriverSetup.exe folder;
3) It is necessary to unwind the phone, remove the cover;
4) It is necessary to disconnect the battery;
5) It is necessary to close the contacts (Photo);
6) Connect the phone to the PC;
7) Open the program Unlock_BootLoader.exe, there is a menu at the top, the item: "Operations> Settings> You need to select the Unlock_BootLoader.xml file"
8) After selecting the Unlock_BootLoader.xml file, click "Operations" again and click Start. Or press the green play button.
9) Done. Now you have TWRP_Mod installed in the Recovery section.
Additionally
The method works both with a locked bootloader and an unlocked bootloader. The only difference is that how to use this program at the moment when the bootloader is unlocked, then you do not need to disassemble the phone and put it into TEST POINT mode.
If the bootloader loader, then the program flashes TWRP_Mod.img to the Recovery section. After flashing, the phone will automatically reboot and the bootloader will remain locked. But TWRP_Mod.img will work. If you need a full unlocking of the bootloader, then you need to prepare several other files. There was no time for that. I made the method only for flashing custom recovery.
In the video, my bootloader is unlocked. I had a chance to block the bootloader and delete all data, so I made a video with the unlocked bootloader.
With a locked bootloader, exactly the same thing, the only difference is that you will need to switch the phone to TEST POINT mode​Youtube video
All thanks Goes for SergeySan27 for his work...
this made for 4pda and i am just sharing his work
This is 100% not working. Pls dont waste your effort
Wow
Specific what version of Pie do you have on Honor Play?
can u also tell if we have a method by which we can unlock our bootloader. If its possible using this technique then we can have development for our device. More people will be available to use the roms.
Excuse me, sir. Where is the TEST POINT?
Up for this...
Up for this...
Cor-L29 firmware 9.0.0.184 Not working....
PM me plz, need you to change my configue xml
Test Point or EDL Mode requires physically opening the phone
nuteyha said:
Up for this...
Click to expand...
Click to collapse
I know lot of people already know but for everyone else's clarification Test Point or EDL Mode requires physically opening the phone and shorting 2 electric points together something like the following video.
https://www.youtube.com/watch?v=W8salW6m-z8
I do not know exactly where those 2 point are on honor play.
But one good thing is opening honor play is comparatively easy as it does not require heating the screen with some heatgun. There are 2 special screws and then the screen is clasped.
Cor-L29 firmware 9.0.0.184 (SP53C636) Not working....
Tried on Huawei P20 EML-L29
Hello,
I have tried this method on my Huawei P20 EML-L29.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the IDT started to flash the image and I got the successful PASS green message in the end.
The bootloader is temporary unlocked in testpoint mode
however, even if I have kept the VOL UP button pressed and removed the usb cable to reboot directly in the recovery mode (to prevent the overwrite with the default eRecovery) it still brings me to the default eRecovery menu.
I have even tried to flash TWRP manually in fastboot (using the tespoint mode to temporary unlock the bootloader) and I got the img file sent and written.
However, it still brings me to the default eRecovery.
Do I do something wrong or miss something? becase flashing of any image is successful but I can't get anything changed on the phone (just getting OKAY or success messages on the pc)
For everyone here trying by opening up the phone, make sure you DON'T touch any other 2 points or your motherboard will short-circuit and become unusable.
sorinbotirla said:
Hello,
I have tried this method on my Huawei P20 EML-L29.
the IDT started to flash the image and I got the successful PASS green message in the end.
The bootloader is temporary unlocked in testpoint mode
however, even if I have kept the VOL UP button pressed and removed the usb cable to reboot directly in the recovery mode (to prevent the overwrite with the default eRecovery) it still brings me to the default eRecovery menu.
I have even tried to flash TWRP manually in fastboot (using the tespoint mode to temporary unlock the bootloader) and I got the img file sent and written.
However, it still brings me to the default eRecovery.
Do I do something wrong or miss something? becase flashing of any image is successful but I can't get anything changed on the phone (just getting OKAY or success messages on the pc)
Click to expand...
Click to collapse
Did you try going to recovery through command line?
Code:
fastboot reboot recovery
(or reboot-recovery)
Sent from my COR-L29 using Tapatalk
Why would people have to take this tedious route to unlock their Huawei or Honor smartphones? Huawei as a company should listen and release bootloader to those who wish to unlock their system. They can put in place an agreement to be accepted by those who want to unlock their phones and expected no warranty after doing so. This is very simple to do.
Can someone confirm test point connectors on the play please?
Doesn't look too difficult imho.
https://4pda.ru/forum/index.php?showtopic=932709
Original thread ?
nuteyha said:
Cor-L29 firmware 9.0.0.184 (SP53C636) Not working....
Click to expand...
Click to collapse
Did you try this then and didn't work??
Does/can this work with Honor View 10?
I tried it with EML-L29C432, program showed me OK, but I still have stock recovery... Any idea?

Huawei starts up with ERROR MODE

Hey. I have a huawei p8 lite 2017 and whenever I turn on my phone, I get this:
ERROR FUNC NO 8 (hifi image)
ERROR FUNC NO 1 (security verify failed)
Is there something I can do? I can't even access fastboot. If you got any idea whatsoever, please, send a message. I don't want to buy another phone. Also, if you need more info about the phone, I'll try to give it to you.
Hey,
If fastboot doesn't work or bootloader mode is not accessible, I only see one option : use manufacturer rescue update mode. You may try this (you need an micro SD card with a least 4.5 GB free)
download this image : PRA_LX1_8.0.0.400(C432)
Extract it and put the dload folder into the root of our sdcard (as your phone doesn't boot you cannot copy directly : you need to remove your card from the phone then use a card reader in order to copy the dload content, then insert it back into the phone)
Turn off the phone
Press power and vol + & - buttons at the same time
Once you see the huawei logo stop pressing power but keep pressing on volume buttons
It should restore your phone with emergency update.
If it doesn't work there is a chance that internal emmc memory chip is dead.
Andrei1744 said:
Hey. I have a huawei p8 lite 2017 and whenever I turn on my phone, I get this:
ERROR FUNC NO 8 (hifi image)
ERROR FUNC NO 1 (security verify failed)
Is there something I can do? I can't even access fastboot. If you got any idea whatsoever, please, send a message. I don't want to buy another phone. Also, if you need more info about the phone, I'll try to give it to you.
Click to expand...
Click to collapse
Hi,
I forgot to use the reply button. I hope that my previous post will help.
damiendroid said:
Hi,
I forgot to use the reply button. I hope that my previous post will help.
Click to expand...
Click to collapse
My friend is having this same issue with her phone.
The button combo to reboot to recovery or bootloader or the download mode don't work at all. It just boots back to the same screen. For us tho the error message is error 10 instead of error 8.
pic related:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Helhound0 said:
My friend is having this same issue with her phone.
The button combo to reboot to recovery or bootloader or the download mode don't work at all. It just boots back to the same screen. For us tho the error message is error 10 instead of error 8.
pic related:View attachment 5710285
Click to expand...
Click to collapse
After some attempts trying to fix the issue my device definitively stopped powering up at all. It's probably a sign of dying infernal storage. I am sorry for your friend as there is probably no solution for his problem.
damiendroid said:
After some attempts trying to fix the issue my device definitively stopped powering up at all. It's probably a sign of dying infernal storage. I am sorry for your friend as there is probably no solution for his problem.
Click to expand...
Click to collapse
Thanks. I already told her now that she's been using it for so long it's probably dying. But she wanted to see if we could recover the data in it? I'm guessing that's not possible?
Helhound0 said:
Thanks. I already told her now that she's been using it for so long it's probably dying. But she wanted to see if we could recover the data in it? I'm guessing that's not possible?
Click to expand...
Click to collapse
Maybe it is possible to retrieve data using adb sideload as the device still powers on but I'm not skilled enough to help with this. My new device is not from Huawei so I cannot test what is possible, sorry. Maybe someone could help you if you open a new thread. Good luck though
damiendroid said:
Maybe it is possible to retrieve data using adb sideload as the device still powers on but I'm not skilled enough to help with this. My new device is not from Huawei so I cannot test what is possible, sorry. Maybe someone could help you if you open a new thread. Good luck though
Click to expand...
Click to collapse
I did open a new thread on this but there were no replies. I got her to get a new phone and give up on the old data. Thanks anyway.

Bootloop, can't access download/fastboot mode or recovery

Phone stuck rebooting over and over
Power+Vol down > doesn't show fastboot
Power+Vol up > doesn't show recovery (was twrp)
can't turn off the phone, had to wait like 8 hours because I thought maybe I could reach fastboot mode after it runs out of battery, once I plug it in the pc, it continues to loop even if I don't press the power button
I had a custom rom (PixelPlusUI) but i'm not sure that a part of the problem.
I don't care about the data, I just want to be able to reach fastboot so I can install stock rom or be able to do anything.
Thanks in advance.
Edit: This video helped me fix it:
Yep I also got hard bricked by Pixelplusui I also wrote a text guide here: https://forum.xda-developers.com/t/...ricked-redmi-note-9-merlin-hard-brick.4347025
vagelis199 said:
Yep I also got hard bricked by Pixelplusui I also wrote a text guide here: https://forum.xda-developers.com/t/...ricked-redmi-note-9-merlin-hard-brick.4347025
Click to expand...
Click to collapse
I managed to recover my phone and install stock miui rom, but couldn't get twrp recovery to work again.
I installed it a couple times (along with the vbmeta thingy) but it never worked and always booted into system, did you get it to work after you unbricked your phone?
20Holmes20 said:
I managed to recover my phone and install stock miui rom, but couldn't get twrp recovery to work again.
I installed it a couple times (along with the vbmeta thingy) but it never worked and always booted into system, did you get it to work after you unbricked your phone?
Click to expand...
Click to collapse
Didn't touch it since then, you probably would have to downgrade your firmware before installing twrp
vagelis199 said:
Didn't touch it since then, you probably would have to downgrade your firmware before installing twrp
Click to expand...
Click to collapse
I couldn't find V12.0.1.0 but I found V12.0.3.0 and V11.0.5.0. Do you know which one I should go with?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
20Holmes20 said:
I couldn't find V12.0.1.0 but I found V12.0.3.0 and V11.0.5.0. Do you know which one I should go with?
View attachment 5432517
Click to expand...
Click to collapse
That's not firmware, look here https://xiaomifirmwareupdater.com/firmware/merlin/ but they are all the latest versions so idk, maybe the ROM also contains firmware? i guess, I think I read that somewhere on xda threads about downgrading
I just realized, by flashing the stock fastboot rom, the bootloader gets locked again, that's why the TWRP wont install, you have to unlock the bootloader again
20Holmes20 said:
Phone stuck rebooting over and over
Power+Vol down > doesn't show fastboot
Power+Vol up > doesn't show recovery (was twrp)
can't turn off the phone, had to wait like 8 hours because I thought maybe I could reach fastboot mode after it runs out of battery, once I plug it in the pc, it continues to loop even if I don't press the power button
I had a custom rom (PixelPlusUI) but i'm not sure that a part of the problem.
I don't care about the data, I just want to be able to reach fastboot so I can install stock rom or be able to do anything.
Thanks in advance.
Edit: This video helped me fix it:
Click to expand...
Click to collapse
does the battery need to be drained before connecting to pc? thanks, have the same problem
riceandsunchess said:
does the battery need to be drained before connecting to pc? thanks, have the same problem
Click to expand...
Click to collapse
honestly I'm not sure, but if i had to guess, i don't think so
20Holmes20 said:
honestly I'm not sure, but if i had to guess, i don't think so
Click to expand...
Click to collapse
thank you so much
20Holmes20 said:
honestly I'm not sure, but if i had to guess, i don't think so
Click to expand...
Click to collapse
it keeps rebooting forever the filter thing doesnt work

Categories

Resources