Database Develop

[REVIEW] Ghostek Bullet Case

The Ghostek Bullet case ($14.95 on Amazon) might just be my favorite daily case. However, there are some things you should be aware of...
Pros:
The bottom of the case is completely flat and can be stood up on all sides if propped properly (Has a lot of straight edges).
Power button/ir blaster is unobstructed.
Volume rocker gives a very satisfying click when depressed.
Very sturdy design (The case and phone will survive several drops without shattering to pieces).
Has a nifty kick-stand (Case can be used as an impromptu tripod).
Very easy to remove and to install.
Camera portions have deep ridges (protects the lens from scratches).
Very modular (Consists of 3 pieces [top, middle, and rear]).
Easy to grip.
Not too pricy.
Cons:
Top, bottom, both sides of the screen, and both camera areas are not sealed from dust (There's a lot of gaps between portions of the case and the phone).
Did not come with a screen protector as advertized (maybe a miscommunication from the seller).
A bit bulky compared to a lot of cases out there.
Fingerprint and dust magnet.
Portrait View
Landscape View
In pieces
Gaps for dust and debris on Rear cameras
Huge gap on bottom of the volume and micro-usb ports.
Gap near the power button.
Conclusion:
Now we all know our awesome phone is aesthetically curved and is very thin. In an attempt to protect this case from falls, this case makes the phone bulker and have flatter edges.
Although this case will let in lots of dust and debris, this is my favorite case to date. It's very durable and very serviceable. I'm sure with some Sugru or some silicone sealant, all the dust issues can be addressed, making this the perfect case.

thats a nice review.. however, i read in a few places that not all 4 corners are a perfect fit. the fit for one of the corners is not perfect i heard. did u come across anythin like that?
i got a love mei case.. but i get an annoying rainbow-like streak on my screen. it happens when i tighten the screws and the screen of the case and m8 screen come into contact. can i use this case with nilkin 9H tempered glass screen protector?

this is a good case but imo it is a bit too bulky for daily use. and the gaps also makes a lot of dust go in and there is a slight chance of scratching the phone if not kept clean from time to time,

Rantrave07 said:
this is a good case but imo it is a bit too bulky for daily use. and the gaps also makes a lot of dust go in and there is a slight chance of scratching the phone if not kept clean from time to time,
Click to expand...
Click to collapse
so what slim dustproof case do u suggest.. that are shockproof to a certain extent?
Spigen slim armor + nilkin temprerd glass... is that a good combo?

CyrilBritto said:
so what slim dustproof case do u suggest.. that are shockproof to a certain extent?
Spigen slim armor + nilkin temprerd glass... is that a good combo?
Click to expand...
Click to collapse
well thats obviously a good combo that you mentioned. but if you want a little more slimmer that i suggest supcase unicorn beetle with a tempered glass protector. i am using UAG scout case with a glass protector. this case is quite nice too. :good:

Rantrave07 said:
well thats obviously a good combo that you mentioned. but if you want a little more slimmer that i suggest supcase unicorn beetle with a tempered glass protector. i am using UAG scout case with a glass protector. this case is quite nice too. :good:
Click to expand...
Click to collapse
I heard the unicorn beetle case covers the lens quite a lot and it affects photography when its late evenings... low light basically.. what do u think..
and someone posted this about the nillkin 9H screen protector.
"Worst ever tempered glass used , after application everything was good but when I removed it after a month it took out the oleophobic coating of the display now I can't use my phone without screen protector I guess the adhesive is too strong better I use your phone without this "
whats ur take on this?

CyrilBritto said:
I heard the unicorn beetle case covers the lens quite a lot and it affects photography when its late evenings... low light basically.. what do u think..
and someone posted this about the nillkin 9H screen protector.
"Worst ever tempered glass used , after application everything was good but when I removed it after a month it took out the oleophobic coating of the display now I can't use my phone without screen protector I guess the adhesive is too strong better I use your phone without this "
whats ur take on this?
Click to expand...
Click to collapse
i have read the same about nilkin protector. there are plenty of other brands i heard Zagg, skinomi, noot, intelliarmor etc. all has good and bad reviews. i personally use a slim glass protector from retail store (forgot the brand name). but i maybe switching to a full glass protector too. my personal preference is Zagg as it covers almost the full front except the speaker grills. http://www.amazon.com/ZAGG-InvisibleShield-Glass-Screen-Protector/dp/B00JZYF7QO/ref=sr_1_16?ie=UTF8&qid=1422376922&sr=8-16&keywords=tempered+glass+protector+m8
but supcase i don't think it cause image disturbance. in some cases when using flash some problems occurred. i think someone mentioned it was only on the clear back version. In the black\black version i think it does not happen. i am not sure as i am not using one currently.

I recently dropped my phone/case and the frame split ?.
I've never had an issue with the case fitment. It's a snug fit and you'll have to uncomfortably stretch the frame to get it on.
Got a pretty good replacement on eBay. As per my original case, I taped the openings and made cut outs of the ports to prevent scratches when plugging things in.

Supcase Unicorn Beetle rugged case w/holster

This isn't a review. Just a first impression/initial thoughts.
I handle otterbox cases of all variety everyday. This unicorn beetle feels just as good, quality wise. Its mostly comparable to the defender series however. Both have built in screen protection, port covers. Both utilize a tongue in groove like method of securing the plastic 'inner' to the rugged rubber 'outer'
Overall it feels very secure and robust, but not quite as bulky as a defender in my opinion.
The orzly glass screen protector on my g4 (edge to edge) does not interfere with the 'front' cover of the case. I have removed the built in plastic protector, so i cannot comment on how it feels etc.
I should also note that i have the plastic back on while in this case. I have not and will not attempt installation with the leather back. This case seems to meet and exceed my needs for when rugged protection is required. My typical day to day is case-less, alternating between plastic and leather backs.
The holster seems to be robust. Made with thick plastic and a 360 degree rotating belt clasp. Almost identical to the defenders holster.
Please excuse the purple tint from my m7 camera.

Do you feel like the holster would snap eventually? How did you remove the screen protector? The screen protector is a major drawback to me.

The holster feels very sturdy. However it is plastic after all and im sure it will break under certain conditions. Im at work right now so ill take some photos of the defender series holster for the g3 and post a comparison in this thread later in the evening. The screen protector was attached to the 'front' with an adhesive. It was easy to pop it out. As i mentioned in my original post, my edge to edge tempered glass protector does not interfere with the fitment of this case.

I removed the screen cover the case had built in, and all I did was push it out and pull on it. The glue used is like a double sided tape, so get as much off when removing the screen and peel the rest. DO NOT USE GOO OFF, you'll mess up the case, trust me. Removing the sticky residue is the hardest part honestly.
Sent from my LG-H811 using Tapatalk

Tempered glass

Does anyone use a tempered glass? Because of the curved edges I suppose that a tempered glass will not cover the hole screen and might look ugly. I currently have a simple screen protector that looks fine, but I am thinking of buying a Nillkin tempered glass like e.g the one in the link http://m.ebay.com/itm/HOT-NILLKIN-9...en-For-HUAWEI-MATE-S-/262097328806?nav=SEARCH
In general I am satisfied with the quality of this brand. Any other suggestions?
Sent from my Huawei Mate S using Tapatalk

https://www.amazon.de/dp/B0199KN38M/ref=cm_sw_r_awd_gir7wbFZ9A00F

have you tried this one yourself? how does it fit? so far all the ones i have tried are too small i would like it to fit nearer the edges so it is not so obvious.
has anyone been able to find one that fits very close to the edges.

There's now some companies making Tempered Glass specifically for curved edges like iPhone 6/s, Galaxy etc etc.
The trick is apply silicone on the edges of the tempered Glass.
But i haven´t found for Mate S yet...

has anyone found a tempered glass that fits correctly and does not leave too much of a gap at the edges and most of all reduces fingerprints on this thing?

My best fitment guess would be nillkin tempered h+pro. I just ordered it to my phone its ultra thin and it really protects screen from shattering if you drop (hand to floor). I have owned that protector on my Nexus5, G3 and G4 and i really love it.

dekr94 said:
My best fitment guess would be nillkin tempered h+pro. I just ordered it to my phone its ultra thin and it really protects screen from shattering if you drop (hand to floor). I have owned that protector on my Nexus5, G3 and G4 and i really love it.
Click to expand...
Click to collapse
Replying to my own post nillkin protectors leave huge gap betweeen edges and protector dont buy if you want sleek look!!

The note 4 glass fits pretty good
Sent from my HUAWEI CRR-UL00 using XDA-Developers mobile app

Best Combination of Case+Screen Film S7 Edge

Hello!
Currently I'm using
Spigen Slim Armor:
http://www.amazon.com/gp/product/B01AUR18D0?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00
IQ Shield Matte
http://www.amazon.com/gp/product/B01BG2ELRI?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00
Its working horribly, there's bubble in all corners (See photos attached). If i'm not mistaken the spigen case is pushing hard on the corners top and bottom.
Is this happening to some of you guys?
What combination of case and screen protector are you guys using so that this doesn't happens?
Thanks in Advance

I have been using the ZAGG invisible shield hd dry combined with a Supcase Unicorn Beetle Pro.
I LOVE this combo.
The screen protector went on relatively easily. did that day one. no bubbles anywhere and it's super clear. it wrapped around the sides easily with the special applicator included in the box. this is NOT a typical credit card squeegee install. I had it just like that for a few days until the case showed up.
What i like about this case is the two part sandwich effect. There is a frame that clips on the front of the phone and the whole ting then inserts into the back. sort of like the ottorbox cases. only half the price. The frame completely protects the edges of the screen protector, i don't thing there really is a way to accidentally rub on the edges of the screen protector and work it loose.
And bonus, it works in my QI wireless charger with no problems whatsoever.

I've got the IQ shield non matte and a Ringke Fusion Crystal case. It's shock simple and has dust covers.
Case > https://www.amazon.com/dp/B01A16BCMW/ref=cm_sw_r_other_awd_bTE6wb4Q9ZZK8
Sent from my SM-G935V using Tapatalk

mvpulsts said:
I have been using the ZAGG invisible shield hd dry combined with a Supcase Unicorn Beetle Pro.
I LOVE this combo.
The screen protector went on relatively easily. did that day one. no bubbles anywhere and it's super clear. it wrapped around the sides easily with the special applicator included in the box. this is NOT a typical credit card squeegee install. I had it just like that for a few days until the case showed up.
What i like about this case is the two part sandwich effect. There is a frame that clips on the front of the phone and the whole ting then inserts into the back. sort of like the ottorbox cases. only half the price. The frame completely protects the edges of the screen protector, i don't thing there really is a way to accidentally rub on the edges of the screen protector and work it loose.
And bonus, it works in my QI wireless charger with no problems whatsoever.
Click to expand...
Click to collapse
Does the zagg protector should help in case of drops? And is it as good as a tempered glass in that case?
Sent from my SM-G935F using Tapatalk

I don't know about best combo (because this is my first combo) but I have the Spigen Ultra Hybrid crystal clear and the Skinomi TechSkin on my gold platinum S7 Edge and so far so good. I just installed the Skinomi last night since I got it yesterday. My Spigen case I've had on the phone since March 5th when the case arrived. I ordered both products from Amazon.

The Skinomi I had did the same as the op, as for the Zagg HD amazon refunded my order yesterday saying something was wrong the product and they were canceling it.
Sent from my SM-G935V using Tapatalk

I got a similar case for my S7E ... Spigen Tough armor with the Armour Suit Military Shield... still awaiting my phones frm T-mobile

Zagg HD Dry front and back with Otterbox Symmetry Clear Series
My UAG case pushed the top right corner had to trim just a little. This case seems to be more screen protector friendly. Both cases are pretty much identical is size. The otterbox is much stiffer and back seems more scratch resistant, the UAG is already scratched. UAG offers a little more screen protection in the corners and the buttons are much easier to press. Pics are taken on top of the UAG case for size comparison.

Bodyguardz HD Curved with the UAG ICE, No problems with the protector peeling.

AndroiderM said:
My UAG case pushed the top right corner had to trim just a little. This case seems to be more screen protector friendly. Both cases are pretty much identical is size. The otterbox is much stiffer and back seems more scratch resistant, the UAG is already scratched. UAG offers a little more screen protection in the corners and the buttons are much easier to press. Pics are taken on top of the UAG case for size comparison.
Click to expand...
Click to collapse
Any problems with the Otterbox peeling up the sides of the protector?

felloffthetruck said:
Any problems with the Otterbox peeling up the sides of the protector?
Click to expand...
Click to collapse
Nope, everything is laying down with no signs of peeling. The zagg did stay on the phone for 3 days with no case while I was waiting for Amazon to deliver and I did blow dry the edges. I don't think this made a difference, otterbox just seems like it sits on top protector better. The case seems to lack screen protection though, the raised edge on top and bottom of screen is only about 1/16 thick. I've never broke a phone but this might be a deal breakerbreaker for some.

I don't have a way of taking taking a pic right now, but I have the Spigen Tough Armor on my GS7E with a Skinomi MatteSkin screen protector.
The Skin has may be 1-2 mm taller than optimal, I have just the slightest push from the case on the top of the skin, but that could also be my fault for not as well aligning the skin as possible. Tough call. I'll probably be putting a new skin on this week anyway just because I'm OCD about it.
addendum 2016/3/23: replaced the MatteSkin last night and put the Tough Armor back on this morning. Alignment seems good. One 'speck' maybe under the skin near the top under the Samsung logo, you'll see some squiggles there where I was working against it this morning to see if it was a bubble that could be pushed out. {shrug}
Fit between the two seems *tight* but *may* be good or great.
After putting the Tough Armor back on I got some push against the bottom left edge of the MatteSkin but a few passes with a spudger seems to have smoothed it back out. See if it stays.
The inner edge of the Tough Armor on the front top/bottom seems tight and sharp-edged where it meets the phone. If this was backed off 0.5mm-ish there would definitely be no issue.
I know some don't like how much the Tough Armor stiffens up the buttons on the sides, but that works in my favor as it cuts down on unintended activation when the phone is in a backpack or pocket, and the shape of the Armor edge makes for a nice flat stance when using the kickstand or otherwise leaning on the side.
Final word: 97% perfect fit. The case ended up pushing the bottom of the screen protector a bit, the inner most lip edges on the Tough Armor was about 1 mm too far to play nice with the MatteSkin. Trimming the edge of the case with a sharp knife though does resolve it, if you can do that with a truly even hand it probably would be a great combo, my hand isn't that perfect so I had a bit of an irregular edge. Worked well though, otherwise.

I'm currently using the IQ Shield HD Wet screen protector:
http://www.amazon.com/gp/product/B01BG2EJYS?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
With the SUPCASE Unicorn Beetle Rugged Full Body Case:
http://www.amazon.com/SUPCASE-Full-...sr=1-1&keywords=galaxy+s7+edge+unicorn+beetle
I just received the Tech21 Frame case in the mail so will be seeing if that works well with the screen protector. Unfortunately I have heard it doesn't but here's to hoping.
Update: Tech21 Frame case will indeed push up on the edges of the screen protector.

The best screen protector I have used to date is from bestskinsever and their customer service is top notch. It isn't noticble at all and the cutouts are scary accurate.
I have ordered some from xtremeguard and the cutouts are too big and I ended up tossing them. The other brand I tried was some from illumni and they scratch up real easy, the fit was better than extremeguard but not by that much and their customer service sucked.
http://www.bestskinsever.com/samsung-galaxy-s7-skin

Here's the Symmetry with the Bodyguardz HD curved.

ipaq_101 said:
The best screen protector I have used to date is from bestskinsever and their customer service is top notch. It isn't noticble at all and the cutouts are scary accurate.
I have ordered some from xtremeguard and the cutouts are too big and I ended up tossing them. The other brand I tried was some from illumni and they scratch up real easy, the fit was better than extremeguard but not by that much and their customer service sucked.
http://www.bestskinsever.com/samsung-galaxy-s7-skin
Click to expand...
Click to collapse
I just ordered the case friendly and edge to edge to see which one I like better. I agree, their screen protectors are top notch.

Zagg HD Dry + Speck Candyshell Clear
Only been on 24 hrs but it looks like a win so far. Both are seriously good quality products, but then they better be for the price.

Galaxy S7 Edge Case, Spigen® [Ultra Hybrid] AIR CUSHION [Crystal Clear] Clear back panel + TPU bumper for Samsung Galaxy S7 Edge (2016) - 556CS20034 with the hollow bumpers in the corner works well with screenknight protector.

Obliq Naked Shield Black + ArmorSuit MilitaryShield FullScreen Extreme Clarity HD
Case : Obliq Naked Shield
Screen : ArmorSuit MilitaryShield
While I like the look of the Skinomi MatteSkin on the screen I wanted to try something else, for comparison. So I got the ArmorSuit and put it on, along with the Obliq case - changing over from a more stealth to more bling kind of look, truly.
Both the case and shield are a very nice fit for the device. Not as large nor thick as the Tough Armor I had been using, time will tell whether that's good or bad.
The ArmorSuit screen protector, once on and de-bubbled basically disappears. It's only the 1st day of use but it's very much NOT there, visually.
The Obliq case is also very lean, and the back is very clear, letting the look of the silver phone I have glare out at you.
Combined they seem to work seamlessly together. I was concerned in particular because the ArmorSuit is a full coverage, and not their case-friendly version, however in this case they seem to be working well together. I truly must have gotten lucky with the screen protector install because I literally can't see the edges of it vs the edges of the Obliq case. Nice.
The Obliq is NOT as much protection as the Tough Armor, to be sure, but it is prettier and alters the ergonomics and looks of the phone dramatically less.
The Obliq DOES appear to be a "fingerprint magnet" though ... time will tell.
The ArmorSuit does NOT appear to be a fingerprint magnet, which is nice. It is very glossy/reflective though, as a couple of the pics I've attached show.

I initially had this Roya kickstand case.. plus this tempered glass protector
I've decided to give the iq shield (not the matte one) a try per some recommendations on here.. hoping sensitivity is at least "close" to having no protector (like with regular phones + tempered).. i've had iq shield in the past and its been solid though i seem to recall sensitivity taking a hit.
I'm going with the Beetle Pro Full case (not hybrid one).. i guess its harder to get off if you use gear vr.. but i saw a rumor if you cut the bumpers off near the usb on gear vr a case may fit, unsure.
I saw the Spigen with kickstand.. it looks similar to the Beetle Pro.. can anyone comment on how slippery it is, or if its got a good grip like the Beetle Pro (full) and protects the edges too (easier to get off maybe)? Spigen appears to not have edge protection, so similar to Beetle Hybrid ($11.99 vs Spigen at $17.99).. I would think the Beetle Pro Hybrid would make more sense price wise.
I guess if you get the $99 2 year accidental damage samsung warranty then the hybrid is a no brainer.

Spigen Rugged Armour vs Ringke Onyx Brushed Metal Case comparison

Heres my Spigen Rugged Armour vs Ringke Onyx Brushed Metal Case comparison reviews with side by side photos
Just a foreword I've only had Spigen cases for my OP3 and its saved me a least a few time I've dropped it either at the airport or the road - brown trouser time where u think the screen will be smashed/cracked. All times walked away with slight mark/scuffs to original OP screen protectors. Fancied something different for my OP5T so went for the Ringke as well.
Look and feel
As you can see both made of same material
The back of Ringke feels unique very sandstone type texture which provides excellent grip whereas the Spigen is very smooth rubber
However the Ringke case feels much thinner so not sure if offers same protection as Spigen
Cutouts and Front lip protection
Front lip protection to protect the screen - think the Spigen wins slight extra thickness to the the lip
Extra protection for the camera both same - few extra mm to protect the rear cameras
Again both have cutouts for all key ports - Ringke also has dust covers for USB-C port and headphone jack which is actually a good thing (fluff stopping charging situations) However a big negative - very hard to access the alert slider using the Ringke due to the top lip so Spigen wins
Both are compatible with the original OP screen protector with no lift off but I think this may be due to human error as I assume applied by hand at factory and I seen some when not fully lined up with screen /front camera etc.
Costs well the Ringke is the slightly cheaper and it came with a free lanyard both premiums products but for me the alert slider access is key issue for me I will keep both and swap due to how I feel. Any questions fire away

I used the Spigen rugged armour on my oneplus 2 and 3. I was thinking about getting it for my OP5T, but I got the sandstone case when I bought the phone and that is just absolutely fantastic... probably doesn't do much when it comes to protecting the phone.. but, it looks amazing.
Once I get tired of looking at this beautiful thing, I will probably end up buying the Rugged Armour
It would be nice to see a pic of the phone in the cases...