Related
here u go folks my 2nd contribution to the Xperia Z tablet development
The 10.3.1.C.0.136 firmware in FTF format from the UK unbranded SGP312 32GB GB/B model, Enjoy
http://www.androidfilehost.com/?fid=23060877490004848
SwiftSmoke said:
here u go folks my 2nd contribution to the Xperia Z tablet development
The 10.3.1.C.0.136 firmware in FTF format from the UK unbranded SGP312 32GB GB/B model, Enjoy
http://www.androidfilehost.com/?fid=23060877490004848
Click to expand...
Click to collapse
Thanks for this.:good:
I've previously used the .370 FTF you posted on my 311 to get myself out of a mess. Worked fine.
GretaLewd said:
Thanks for this.:good:
I've previously used the .370 FTF you posted on my 311 to get myself out of a mess. Worked fine.
Click to expand...
Click to collapse
Have you experianced any issues flashing a 32gb firmware onto a 16gb device? does everything show correctly under storage?
I messed up mine too and had to flash a German firmware to my UK device but want to flash back to UK.
SWFlyerUK said:
Have you experianced any issues flashing a 32gb firmware onto a 16gb device? does everything show correctly under storage?
I messed up mine too and had to flash a German firmware to my UK device but want to flash back to UK.
Click to expand...
Click to collapse
I didn't use it for very long - it was just a "stepping-stone" when I was trying to get root on 4.2.2
So I did very little more than install gapps, boot it up, use Play store, download, install & configur SuperSU.
I may have used RootExplorer to check the content of my external SD card...but I'm not 100% sure
GretaLewd said:
I didn't use it for very long - it was just a "stepping-stone" when I was trying to get root on 4.2.2
So I did very little more than install gapps, boot it up, use Play store, download, install & configur SuperSU.
I may have used RootExplorer to check the content of my external SD card...but I'm not 100% sure
Click to expand...
Click to collapse
What version are you running on now?
I've just flashed it myself and there's no apparent issues but I'm desperate for the UK 16GB FTF. Did you update to 32GB 4.2.2?
SWFlyerUK said:
What version are you on now?
I've just flashed it myself and there are no apparent issues but I'm desperate for the UK 16GB FTF.
Click to expand...
Click to collapse
I'm using the latest PAC 4.3 Nighlty ROM at the moment - though just about to try a CM10.1 (4.2.2) "experimental" which has GPS fixed (this has been a problem with all the custom ROM using 4.2 or 4.3).
I've been off work recovering from an operation - so I'm filling my time flashing ROMs :laugh: - one of the advantages of unlocking my bootloader - but I wish I'd read about backing up the TA partition before unlocking - I've lost all my Sony DRM stuff :crying:
Flashed this FW and a different one to test, but can't seem to get Google Now on either.
When I swipe up from the bottom I get Google search and it looks like Google Now but there's no cards.
Is it just me or has Now been dropped?
SWFlyerUK said:
Have you experianced any issues flashing a 32gb firmware onto a 16gb device? does everything show correctly under storage?
I messed up mine too and had to flash a German firmware to my UK device but want to flash back to UK.
Click to expand...
Click to collapse
Yep, I am running this on a 16GB device for UK !
Full ODIN stock ATT files.
Download one file, unzip to 4 files and unzip this 4 files to md5 format. Put in ODIN and flash.
I'm not responsible to what happens to your phone if you flash this files. Flash in this files it is your and only your responsibility.
AP_G925AUCU6EQCF_CL10950877_QB12998210_REV02_user_low_ship_meta.tar.rar
BL_G925AUCU6EQCF_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
CP_G925AUCU6EQCF_CP6075908_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
CSC_ATT_G925AATT6EQCF_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
DOWNLOAD HERE - Status : Live
Link is up
that will solve lot of issues and answer lot of questions, thank you.
I wish I had this 3h ago.
vendo said:
that will solve lot of issues and answer lot of questions, thank you.
I wish I had this 3h ago.
Click to expand...
Click to collapse
It just pop up on servers some 30 min ago
Help.........!!!
Can jump from version G925AUCS5DPK5 to this version ? when flash is stuck in odin, is there any way to do it, stays in file analysis for a long time but does not load, any idea how to fix it?:crying:
Here's everything I've tried
1) Change USB port
2) Administrator mode
4) Rebooted phone
5) rebooted computer
...... any other idea ?
Does this require a phone to be on a specific version before flashing? Just want to be sure everything is good to go before moving forward.
**Edit** found answer by searching. (sorry to jump post heheh
ivan.evg said:
Can jump from version G925AUCS5DPK5 to this version ? when flash is stuck in odin, is there any way to do it, stays in file analysis for a long time but does not load, any idea how to fix it?:crying:
Here's everything I've tried
1) Change USB port
2) Administrator mode
4) Rebooted phone
5) rebooted computer
...... any other idea ?
Click to expand...
Click to collapse
Did you unzip all 4 files all the way to md5 ?
norbarb did it again!
norbarb said:
Full ODIN stock ATT files.
Download one file, unzip to 4 files and unzip this 4 files to md5 format. Put in ODIN and flash.
I'm not responsible to what happens to your phone if you flash this files. Flash in this files it is your and only your responsibility.
AP_G925AUCU6EQCF_CL10950877_QB12998210_REV02_user_low_ship_meta.tar.rar
BL_G925AUCU6EQCF_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
CP_G925AUCU6EQCF_CP6075908_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
CSC_ATT_G925AATT6EQCF_CL10950877_QB12998210_REV02_user_low_ship.tar.rar
DOWNLOAD HERE - Status : Live
Click to expand...
Click to collapse
Thanks for another great post, norbarb!, your contributions are highly appreciated!
New update QE1
New update "925AUCS6EQE1" with May security patch is on the way...
ivan.evg said:
Can jump from version G925AUCS5DPK5 to this version ? when flash is stuck in odin, is there any way to do it, stays in file analysis for a long time but does not load, any idea how to fix it?:crying:
Here's everything I've tried
1) Change USB port
2) Administrator mode
4) Rebooted phone
5) rebooted computer
...... any other idea ?
Click to expand...
Click to collapse
Now it´s working, I unzip all 4 files to md5, and then load the ROM successfully, but it stuck on black screen for about 30 min and never started, I had to go down to the previous version now with imei corrupt and now my cell phone no longer has signal, I do not know what went wrong or where I was wrong?
I flash this files in my g925aucu4dph5 phone, I will upgrade to nougat? What about ADB files? Do you have a video tutorial to this process?
just received my g925a 128GB version, currently has the build number LMY47X.G925AUCU3BOJ7, can i use Odin 3.10.6 and just flash this on it after zipping all 4 files down to md5? (bl, ap, cp, csc)??/
I'mgoing to assume it will not b rootabe after this? If so, to what firmware can i. should i update to so that I may root as flash some other ROM? What I really want to accomplish is just rid myself of all the AT&T bloat, as I do not use AT&T.......and would like to be a more newer version of android then 5.1.1
excuse of it seems nubish, but been using OnePlus One for 3 years now, and stumbled upon getting this phone on a great deal on getting this phone for $240.....so new to the samsung scene, but not to the rooting/bootloading unlocking flashing scene....
Also saw that another poster lost his storage flashing odin....something not cool on a 128gb device and another lost his imei....not cool either
Thanks for the update! Worked beautifully. Now waiting for may update.
Once you load these are we supposed to get updates from ATT? I ask b/c when I hit update it never finds anything and I don't have the most current OS I have the previous to current using these methods to update
has anybody done this without losing original storage or imei??? have a 128GB att edge and would not want this error to occur on mine...still in 5.1.1 build OJ7....
localization of 7.0 AT&T
Hi guys. Sorry for possible offtopic, but I have a guestion for people who upgraded to Android 7 on this device:
Is there any changes in localizations list? Can this phone switch to russian language?
ty
ropotun said:
Hi guys. Sorry for possible offtopic, but I have a guestion for people who upgraded to Android 7 on this device:
Is there any changes in localizations list? Can this phone switch to russian language?
ty
Click to expand...
Click to collapse
Yes you can
On Edge of Galaxy
Once you use these methods must I always? Rather then getting the it's update - my phone doesn't get current version and says I'm up to date .I'm on QCF.
36dbldz said:
Once you use these methods must I always? Rather then getting the it's update - my phone doesn't get current version and says I'm up to date .I'm on QCF.
Click to expand...
Click to collapse
Are you on AT&T network and using at&t sim card, are you in USA?
On Edge of Galaxy
norbarb said:
Are you on AT&T network and using at&t sim card, are you in USA?
On Edge of Galaxy
Click to expand...
Click to collapse
Do we need to be on a certain version before flashing this w/odin?
Sent from my SAMSUNG-SM-G925A using XDA-Developers Legacy app
I flashed my Galaxy A8+ using Stock Firmware for KSA by only flashing AP. After successful flashing, my phone which has total 64GB memory, is now showing total only 16GB. Where and what did I do wrong ?
noob_coder said:
I flashed my Galaxy A8+ using Stock Firmware for KSA by only flashing AP. After successful flashing, my phone which has total 64GB memory, is now showing total only 16GB. Where and what did I do wrong ?
Click to expand...
Click to collapse
I have not this happen to me and I have flashed a lot stock roms but did do a reset and I never update with sim card in.
Sent from my SM-A730F using xda premium
mchlbenner said:
I have not this happen to me and I have flashed a lot stock roms but did do a reset and I never update with sim card in.
Sent from my SM-A730F using xda premium
Click to expand...
Click to collapse
I only did AP Flash. I read in some forum here on XDA that for fixing this 64GB into 16GB problem, Flash CSC File. It will fix it.
my phone is 32 gb but I had the same problem , I flashed the combination file, then full flash and works again with the real memory
noob_coder said:
I only did AP Flash. I read in some forum here on XDA that for fixing this 64GB into 16GB problem, Flash CSC File. It will fix it.
Click to expand...
Click to collapse
The CSC not HOME_CSC contains a PIT file which has information on the size of the device partitions. It seems you have flashed firmware which has defaulted your internal storage to16gb.
I suggest you try flashing the WHOLE firmware for your device but flash the CSC not HOME_CSC. Be aware this will also wipe your device.
ashyx said:
The CSC not HOME_CSC contains a PIT file which has information on the size of the device partitions. It seems you have flashed firmware which has defaulted your internal storage to16gb.
I suggest you try flashing the WHOLE firmware for your device but flash the CSC not HOME_CSC. Be aware this will also wipe your device.
Click to expand...
Click to collapse
Yup I had it fixed. Can you share some idea on getting OEM UNLOCK button visible. I tried waiting 7 days it didn't show up. I read some places, many people shared their experience that waiting for 7 days + Nougat Easter Egg game (CAT GAME) enabled the OEM UNLOCK button for them.
any thoughts on this ?
I Downloaded The Fw From Sammobile, Yes Its Was Very Slow, Thats Why I Re-upped It Untouched To Androidfilehost, Much Faster To Dl For Others.
Only For Snapdragon Variants, Its The Universal Firmware, Its Free Of Carrier Bloat But Has Some Samsung Useless Apps.
Not For Exynos Variants Like The Sm-g935f, Etc.
MORE ABOUT UNIVERSAL FW READ THIS
The Zip Has The Att Extension But All Universal Snapdragon Fw Are The Same Afaik, It Does Not Install Anything Specific For Att,
Im On Telus/koodo Using The Sm-g935a Without Issues, Shows Lte Signal When On Data Mode.
Idk If Auto Updates Work, Although Update Options Are Available From The System Menu
Instructions:
Dl Zip, Extract Zip, Put Phone In Dl/odin Mode. Run Odin As Admin, And Load Each Cp, Ap, Bl And Csc(Dont Use The Home Csc As I Read Its Fracks Things Up), Just Use "Csc_oym" File In Odin
Fyi. I Used Princes Odin But Failed, Used Untouched Odin And It Flashed Successfully. Was On Nougat 7.0 Sim Unlocked SM-G935A At&t Branded Stock Fw. I Included Both For Your Pleasure.
Afaik It Will Wipe Your Phone, Do A Backup As Needed
make a backup by using adb, search for this method, and a twrp nandroid
always make a backup, and never just one, and save them somewhere safe in multiple locations and clouds, hard drives die all the time
Disclaimer, Im Not Responsible For What You Do To Your Phones
G935UUES4CRG3_G935UOYM4CRG3_ATT.zip - 2.9GB
Odin3_v3.13.1.zip
Odin3+v3.12+(PrinceComsy).zip - not working with this fw
does wifi calling work this way or no bc its the unlocked version primarily?
Hi , can you confirm if this has no issue? im planning to flash my rom into oreo as well. thanks for sharing this.
Misslys9 said:
does wifi calling work this way or no bc its the unlocked version primarily?
Click to expand...
Click to collapse
rhayann77 said:
Hi , can you confirm if this has no issue? im planning to flash my rom into oreo as well. thanks for sharing this.
Click to expand...
Click to collapse
most answers to questions are linked in the op
MORE ABOUT UNIVERSAL FW READ THIS
vincom said:
answers, if any, are linked in the op
MORE ABOUT UNIVERSAL FW READ THIS
Click to expand...
Click to collapse
Hi Vincom, yes i have already read the article. the main reason im flashing the rom is because of the hidden DATA icon in the toggle screen. and also i want my phone to have the OREO update as well. this is my first samsung phone. i have experience in flashing ROMs in my xiaomi redmi 1s phone. so im a bit skeptical if i can do this on my own. this odin process is very new to me. so what is the worst thing that can happen it i brick my phone? can i do a hard reset and will it default to the stock AT&T ROM if ever?
rhayann77 said:
Hi Vincom, yes i have already read the article. the main reason im flashing the rom is because of the hidden DATA icon in the toggle screen. and also i want my phone to have the OREO update as well. this is my first samsung phone. i have experience in flashing ROMs in my xiaomi redmi 1s phone. so im a bit skeptical if i can do this on my own. this odin process is very new to me. so what is the worst thing that can happen it i brick my phone? can i do a hard reset and will it default to the stock AT&T ROM if ever?
Click to expand...
Click to collapse
odin is as easy as it gets, its made for samsung phones.
safe is to do nothing if ur happy as is.
NEVER EVER USE THE "PIT" OPTION UNLESS DIRECTIONS SAY SO IN XDA FORUM ONLY
read/watch vids on using odin
make a backup by using adb, search for this method, and a twrp nandroid
always make a backup, and never just one, and save them somewhere safe in multiple locations and clouds, hard drives die all the time
vincom said:
odin is as easy as it gets, its made for samsung phones.
safe is to do nothing if ur happy as is.
read/watch vids on using odin
make a backup by using adb, search for this method, and a twrp nandroid
always make a backup, and never just one, and save them somewhere safe in multiple locations and clouds, hard drives die all the time
Click to expand...
Click to collapse
Thanks again, ill watch some youtube videos first and if i feel confident enough then i will go thru with this. will keep you posted.
---------- Post added at 09:58 AM ---------- Previous post was at 09:36 AM ----------
rhayann77 said:
Thanks again, ill watch some youtube videos first and if i feel confident enough then i will go thru with this. will keep you posted.
Click to expand...
Click to collapse
Vincom, by the way this Oreo update has nothing to do with my CSC right? i just check its G935AATT4BQK2. my device model is SM-935A
rhayann77 said:
Vincom, by the way this Oreo update has nothing to do with my CSC right? i just check its G935AATT4BQK2. my device model is SM-935A
Click to expand...
Click to collapse
yes and no, csc controls what bloatware and which settings are setup by default dependant on carrier and country, hence why this is a universal fw and not dependant on original csc files.
if u truly have the att s7edge g935a, which is what i had, then yes.
vincom said:
yes and no, csc controls what bloatware and which settings are setup by default dependant on carrier and country, hence why this is a universal fw and not dependant on original csc files.
if u truly have the att s7edge g935a, which is what i had, then yes.
Click to expand...
Click to collapse
Thanks for the clarification. the download path keeps on failing on me for some reason. i already downloaded 1.8G or maybe its my internet speed perhaps?
rhayann77 said:
Thanks for the clarification. the download path keeps on failing on me for some reason. i already downloaded 1.8G or maybe its my internet speed perhaps?
Click to expand...
Click to collapse
could be android file host is having issues today
or u can try ur luck with sammobile.com which is where i initially got the file
edit. ya, i just tried, issues on their end
vincom said:
could be android file host is having issues today
or u can try ur luck with sammobile.com which is where i initially got the file
edit. ya, i just tried, issues on their end
Click to expand...
Click to collapse
i finally finished downloading the zip file earlier. i will flash it later after i go home from work. and one other thing i need to make sure. with this Oreo rom, the DATA connection icon will be available in the toggle screen right?
@vincom, this Oreo rom has already the DATA icon to be toggled on/off right? this is one of the reason i want to flash the att rom as well.
vincom said:
most answers to questions are linked in the op
MORE ABOUT UNIVERSAL FW READ THIS
Click to expand...
Click to collapse
I did read all of it but your description was vague on the att part so I didnt know if you modified it which it sounds like its just the 935u firmware and Im not a newb n00b
@vincom, initially got an error sha256 when i started to flash it. and my phone started to boot loop after i use a different odin, the prince odin. but after some searching. i fount out i just need to use the newer patch version of odin - Odin3 v3.13.1_3B_PatcheD and now im running Oreo on my s7 edge. hopefully this can help others too.
rhayann77 said:
@vincom, initially got an error sha256 when i started to flash it. and my phone started to boot loop after i use a different odin, the prince odin. but after some searching. i fount out i just need to use the newer patch version of odin - Odin3 v3.13.1_3B_PatcheD and now im running Oreo on my s7 edge. hopefully this can help others too.
Click to expand...
Click to collapse
did u try the one i have in the op, Odin3_v3.13.1.zip
vincom said:
did u try the one i have in the op, Odin3_v3.13.1.zip
Click to expand...
Click to collapse
yup i tried that one the first time. thats when it gave me the error message sha256. then i tried the prince odin that gave me the error mmc something.
The author claims performance and battery improvements but has anyone that switched over really noticed that big of a improvement?
I mean i already disabled all the carrier bloat with adhell isn't that basically the same as installing this rom? Does the universal maybe have a different kernal/different system level tweaks?
Bro , what will happen if my unlocked at&t s7edge installing this ? Is there sim will be locked again or not ? Thanks in advance and sorry for my bad english...
Rifuki18 said:
Bro , what will happen if my unlocked at&t s7edge installing this ? Is there sim will be locked again or not ? Thanks in advance and sorry for my bad english...
Click to expand...
Click to collapse
will not change your current sim lock status, no fw exists that would change it
Thanks
Thanks a lot, this firmware works for me with the 3b patched odin on the first try.
Hi there, I'm sick of waiting for my dual-sim Note 9 to get the Pie 9.0 One UI update from Samsung. What I did before on my S7 was flash firmware to it via ODIN. I was wondering if I could flash the single-sim made firmware SM-N960F onto my Note 9 SM-N960F/DS and still have the dual-sim functionality and if it would still receive the dual-sim firmware OTAs in the future. Any help on my issue would be greatly appreciated!
As far as I know the Dual SIM models share the same firmware as the single.
RiotStorm said:
Hi there, I'm sick of waiting for my dual-sim Note 9 to get the Pie 9.0 One UI update from Samsung. What I did before on my S7 was flash firmware to it via ODIN. I was wondering if I could flash the single-sim made firmware SM-N960F onto my Note 9 SM-N960F/DS and still have the dual-sim functionality and if it would still receive the dual-sim firmware OTAs in the future. Any help on my issue would be greatly appreciated!
Click to expand...
Click to collapse
Can you post the screenshot *#1234# To see if you can maunally update to pie! As i have i have dual sim Note 9!
benjaminllim said:
As far as I know the Dual SIM models share the same firmware as the single.
Click to expand...
Click to collapse
Thanks for the reply, I have been searching around for separate firmware for my dual SIM but can't find it so has to share it I guess.
N1NJATH3ORY said:
Can you post the screenshot *#1234# To see if you can maunally update to pie! As i have i have dual sim Note 9!
Click to expand...
Click to collapse
https://imgur.com/a/cYp4rjZ
https://imgur.com/a/3N2Zq5Q
RiotStorm said:
https://imgur.com/a/cYp4rjZ
https://imgur.com/a/3N2Zq5Q
Click to expand...
Click to collapse
Here follow this guide, you will be on ONE UI PIE 9 within 15 mins enjoy --> https://forum.xda-developers.com/showpost.php?p=78660727&postcount=384
Please NOTE this is not my guide!! All Thanks and all credits go to @jaylence for taking the effort to reset his device, and getting the "update.zip" for you!
Original Thread --> https://forum.xda-developers.com/sho...&postcount=384
N1NJATH3ORY said:
Here follow this guide, you will be on ONE UI PIE 9 within 15 mins enjoy --> https://forum.xda-developers.com/showpost.php?p=78660727&postcount=384
Please NOTE this is not my guide!! All Thanks and all credits go to @jaylence for taking the effort to reset his device, and getting the "update.zip" for you!
Original Thread --> https://forum.xda-developers.com/sho...&postcount=384
Click to expand...
Click to collapse
Thanks for that, I have no clue what I'm doing though. I think I might just continue with flashing the Single-SIM firmware. I don't want to factory reset either.
RiotStorm said:
Thanks for that, I have no clue what I'm doing though. I think I might just continue with flashing the Single-SIM firmware. I don't want to factory reset either.
Click to expand...
Click to collapse
You are in the Multi-CSC, so there's no need to factory reset either. I followed that same guide a couple weeks ago and it worked just fine, didn't need to reset. Just make sure when you update to ARL3 through Odin to choose the Home CSC file so data remains the same.
daLareid said:
You are in the Multi-CSC, so there's no need to factory reset either. I followed that same guide a couple weeks ago and it worked just fine, didn't need to reset. Just make sure when you update to ARL3 through Odin to choose the Home CSC file so data remains the same.
Click to expand...
Click to collapse
I'm not entirely advanced with this stuff tho, I'm not sure how to follow it :/
RiotStorm said:
I'm not entirely advanced with this stuff tho, I'm not sure how to follow it :/
Click to expand...
Click to collapse
it's super easy you first download this as i have check your firmware--> ARL3 -> CSA2 once downloaded onto your pc/laptop rename to UPDATE.ZIP once renamed. You need to copy it to your NOTE 9 sd card..
Then you turn off your phone, once your phone is off.. You need to into boot to recovery by holding power up + power +bixby button . Then use volume button to go to update from zip will see the menu on your NOTE 9 and hit yes to update it's so easy!
N1NJATH3ORY said:
it's super easy you first download this as i have check your firmware--> ARL3 -> CSA2 once downloaded onto your pc/laptop rename to UPDATE.ZIP once renamed. You need to copy it to your NOTE 9 sd card..
Then you turn off your phone, once your phone is off.. You need to into boot to recovery by holding power up + power +bixby button . Then use volume button to go to update from zip will see the menu on your NOTE 9 and hit yes to update it's so easy!
Click to expand...
Click to collapse
Damn man you are amazing <3 I love you! I never knew this was a thing, I really appreciate it. It's updating now! Seriously good job man.
RiotStorm said:
Damn man you are amazing <3 I love you! I never knew this was a thing, I really appreciate it. It's updating now! Seriously good job man.
Click to expand...
Click to collapse
No Worries your welcome XDA ROCKS!!!
Hi
Please someone help me.
I have used Odin and the the firmware from SamMobile to upgrade my note 9 dual sim to Pie...It upgraded to Pie perfectly, but the main reason was to change my phone to South African version (XFE)...Before i flashed it was XME/XME/XFE/XME, and after i flashed it looks exactly the same..It is not allowing me to get wifi calling...Please tell me why it didnt change the first 3 all to XFE, and how i can achieve this..
Thank you for any help