Database Develop

[DEV][WIP] CyanogenMod 13 for Huawei P9 Lite | Honor 5c | Honor 7 Lite [METICULUS]

CyanogenMod 13 is a free, community built distribution of Android 6.0 (Marshmallow) which greatly extends the capabilities of your phone, tablet or PMP.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
These are CM13 builds for the Huawei P9 Lite. It may cause all the things in the disclaimer to happen, or steal your girlfriend while you are busy flashing ROMs.
GPL:
Meticulus said:
Source trees are up
kernel: https://github.com/Meticulus/android_kernel_huawei_hi6250
device: https://github.com/Meticulus/android_device_huawei_hi6250
vendor: https://github.com/Meticulus/android_vendor_huawei_hi6250
For you builders out there. there is a patch.sh file which must be run from the patches dir before building.
Also there are a few projects out side of CM that I build into my ROMs:
https://github.com/omnirom/android_packages_apps_PerformanceControl/tree/android-4.4
https://github.com/Meticulus/android_packages_apps_CodinalteParts.
Click to expand...
Click to collapse
Warning: Currently, this ROM is in BETA.
Notice: These are not "official" CyanogenMod builds.
PLEASE STAY INFORMED!
No one likes to repeat themselves over and over again.
Latest Development Activity: here
Development Blog: here
I am not your personal tech support/customer service!
Don't post in here just to get me to notice or help you!
If all you do is complain then I never help you. That's my choice.
If you are helpful and contribute to development by testing or helping out others, I am more likely to help you.
If I tell you to take your conversation out of this thread, it's because you are OFF TOPIC. So don't respond, just continue somewhere else!
If you try to tell me what to do or how I should be, then I HATE YOU! I can't help it. I HATE THAT!
If you don't read what I write then when you don't understand I laugh at you!
Download | Changelog | Install Instructions: meticulus.co.vu
Gapps [arm64 | 6.0 | you choose]: here
XDA:DevDB Information
CyanogenMod 13, ROM for the Huawei P9 Lite
Contributors
Meticulus, dady000, surdu_petru, The Marionette, XePeleato
Source Code: https://github.com/Meticulus
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Bootloader Unlocked / TWRP
Based On: CyanogenMod
Version Information
Status: Beta
Created 2016-09-20
Last Updated 2016-12-20

Working / Not working
Working
It boots
RIL (dual sim not tested)
LCD Display
Touch screen
Audio
Wifi
Bluetooth: File Transfers
Accelerometer sensor
Proximity sensor
Luminosity sensor
Magnetic Sensor
Deep Sleep
Wifi Hotspot
USB Tethering
Bluetooth Tethering
External SD Card: for "Portable storage" use
External SD Card: "Internal storage" use
Battery Usage Stats
GPS
Cameras
NFC
Not working
FM Radio
Emulated? Gyroscope sensor
Emulated? Air pressure sensor
Minor issues

Thank you @Meticulus that you have made this possible.
Now I 'm really very curious how this evolved .

AWESOME, eagerly following this thread.
Sent from my GEM-703L using XDA-Developers mobile app

Is there a basic working not working list as I haven't even rooted this phone yet.
Sent from my HUAWEI VNS-L31 using Tapatalk

Well,nothing works except for boot.
I don't suggest anyone who isn't experienced to try to flash it,it is a pain to come back to stock after you do everything to flash CM(not emotionally hard but literally hard).

that was fast...

Good! thanks for work on it!

Wow, good job !
That was fast

And the alpha build had a lift off! Way to go

THANK YOU VERY MUCH! Can't wait for it!!!

Does it have TWRP built in?
So can I flash it and then just restore my current setup? Or will I have to reinstall TWRP?

Schlengge said:
Does it have TWRP built in?
So can I flash it and then just restore my current setup? Or will I have to reinstall TWRP?
Click to expand...
Click to collapse
TWRP isn't included,and you will have a bad time trying to restore stock after doing all the things for CM.
Trust me,the build isn't anything special for now(only boots, the UI is glitchy(since we have to skip the Huawei hwcomposer like any other Hauwei phone on CM),the nav bar buttons are a bit too big and the phone won't wake up once it goes to sleep). That's all,to be honest.

The Marionette said:
TWRP isn't included,and you will have a bad time trying to restore stock after doing all the things for CM.
Trust me,the build isn't anything special for now(only boots, the UI is glitchy(since we have to skip the Huawei hwcomposer like any other Hauwei phone on CM),the nav bar buttons are a bit too big and the phone won't wake up once it goes to sleep). That's all,to be honest.
Click to expand...
Click to collapse
Ah okay thats what I expected.
No problem though. A booting ROM this fast is more than I imagined. Cool to see a build already

Meticulus said:
CyanogenMod 13 is a free, community built distribution of Android 6.0 (Marshmallow) which greatly extends the capabilities of your phone, tablet or PMP.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
These are CM13 builds for the Huawei P9 Lite. It may cause all the things in the disclaimer to happen, or steal your girlfriend while you are busy flashing ROMs.
GPL:
Code:
https://github.com/Meticulus
Warning: Currently, this ROM is EXTREMELY ALPHA.
Download meticulus.co.vu
Gapps: here
XDA:DevDB Information
CyanogenMod 13, ROM for the Huawei P9 Lite
Contributors
Meticulus
Source Code: http://github.com/Meticulus
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Bootloader Unlocked / TWRP
Based On: CyanogenMod
Version Information
Status: Testing
Created 2016-09-20
Last Updated 2016-09-20
Click to expand...
Click to collapse
Lol that was fast af... Just wondering, how much would it take to get to a semi-stable rom? Thanks for working on this device! Cheers

Acoca said:
Lol that was fast af... Just wondering, how much would it take to get to a semi-stable rom? Thanks for working on this device! Cheers
Click to expand...
Click to collapse
That depends. Huawei pretty much,politely put,urinated over the dev community by making heavy changes to Android and then refusing to give all the info to devs,making CM/AOSP impossible or extremely hard to port.
It is really hard to speculate,we have no idea what Huawei messed up on the software level. I mean,we do,but I am sure even more unpleasant surprises are on the way.

Either way great work just to get as far as a booting build. Lucky as this phone has zero dev appeal really.
Sent from my HUAWEI VNS-L31 using Tapatalk

Acoca said:
Lol that was fast af... Just wondering, how much would it take to get to a semi-stable rom? Thanks for working on this device! Cheers
Click to expand...
Click to collapse
Please do not quote the OP.

Source trees are up
kernel: https://github.com/Meticulus/android_kernel_huawei_hi6250
device: https://github.com/Meticulus/android_device_huawei_hi6250
vendor: https://github.com/Meticulus/android_vendor_huawei_hi6250
For you builders out there. there is a patch.sh file which must be run from the patches dir before building.
Also there are a few projects out side of CM that I build into my ROMs:
https://github.com/omnirom/android_packages_apps_PerformanceControl/tree/android-4.4
https://github.com/Meticulus/android_packages_apps_CodinalteParts
EDIT: I think I will have the hwcomposer fixed soon...

Omg, when this actually is gonna work We can't thank the developer enough...

[ROM][7.1.2][OpenKirin's LineageOS 14.1 - Huawei P8Lite ][Update 31/12/2017]

So, since the other thread is pretty clogged up, I have decided to create a new one (even tough I know this is going to get even more clogged up...)
So the day has come, since the closed beta I have fixed some bugs and I have (finally) setup the downloads server, it's the right time.
I am not really good writing this kind of posts, you know what you want, and I am too tired to talk about the risks of not being careful flashing, etc...
Installation Instructions
Your device must be updated to EMUI 4.1 !
You should have already installed TWRP 3.1.1-0 !
Format data in TWRP and reboot device again into TWRP ( if you come from stock EMUI 4.1 )
Wipe Factory Reset in TWRP
Flash LOS 14.1 zip and reboot to System
Reboot device in TWRP and install Gapps ( optional )
Install Magisk or SuperSU if you need ROOT ( optional )
Enjoy
Currently Working List
Audio
Camera fully working with Footej Camera ( via PlayStore )
WiFi
BT with a2dp
dual SIM with data network connecting
Lights
Sensors
Off-mode charging
adb & mtp
Internal/External Storage
Flash
Touch-screen
LiveDisplay
Screenrecord
HWC partially
GPS
NFC
DT2W
Currently Not Working
Encryption
SIM without LTE/4G support
Stock camera video recording, please use Footej Camera via PlayStore !
There may be others small issues !
Downloads
lineage-14.1-20171231_141649-UNOFFICIAL-alice.zip md5 : 1078349b8c78652ba1aaf2ed7548d361
Gapps ( recommended version : ARM64 - 7.1 - nano )
Please use always the latest update from Gapps
Misc
If you have a Honor 4X and the rom isn't compatible (it shouldn't be compatible so don't worry) send me a PM (unless you are @panchovix because I already know that he is interested lol), because I need a little group of people to test the adapted 4X version, but that rom will be published in the correct subforum, so please let's keep it tidy.
Please think before you post, I wouldn't like to reach 50 pages within 2 weeks, so if you just want to post "OMG SO HYPED" do it in the other thread or don't do it at all.
P.S: The Github repo will be updated as fast as I can, I understand that some people want to port roms now that we have reached 'certain stability', but I am just one person and my time is limited.
Kernel GPLv2 compliant : android_kernel_huawei_hi6210sft !
This ROM is provided by OpenKirin TEAM (XePeleato, OldDroid, surdu_petru )​
XDA:DevDB Information
LOS 14.1, ROM for the Huawei P8lite/P8 Lite
Contributors
XePeleato, surdu_petru, OldDroid, olrak2
Source Code: https://github.com/OpenKirin
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Android MM (EMUI 4.1)
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2017-10-15
Created 2017-01-21
Last Updated 2017-12-31

@XePeleato OMG SO HYPED, ok nope haha, thanks man, finally it is here now on XDA, good luck on the rest (because just watching there are just little bugs, atleast for me), as always i say it to you, Good job! and Thanks for remembering us 4X users!
@MarcoPLs @Zizo17 @ericotena @keikari good luck here, we have someone that want to help us send him a PM, and if you know more people using the 4X (i know there are more, probably you that are you reading this :I), PM him (don't comment here, he doesn't want to inundate the thread)
And for you P8 lite users that can get the rom working already, you are lucky! enjoy the rom, for me it is stable for daily use in my case

it's the same rom from the other thread? but on a zip file?
what are the requirements to safely flash this trough twrp?

@Z3NG3R1 this is different one from htcmania, this one has a lot of less bugs, and yes on a zip file
i think you should know how to flash roms at this moment, make a backup and flash it, if something goes wrong restore lol (flashing custom roms has no requeriments, except for having OBV unlocked bootloader and twrp)

Oh wow! So, those are the only bugs? Everything else is up and running? Cool. I'll try this. I can't say thanks enough. @XePeleato the site isn't loading??

@panchovix yeah, I know how to backup and flash a ROM...but what I was saying is that in the toher post, the were saying that you needed a different twrp recovery bro...so that's why I asked...but I'll install it right away then! I'm so happy that this phone is getting custom roms!!!

@Z3NG3R1 oh i see, reading the update binary it seems you need that twrp itself recognizes your phone as hi6210sft (this depends on TWRP) and ALE-L21 (this depends of build.prop), so if you have both you are good

@panchovix well...I think I have both..my twrp version is 3.0.2.0 and my phone is ALE-21 converted to dual sim..do you think I'm good?

Not working Website :crying:
Not working website :crying:

WoW!! Great work thanks!
The Play store is working?

seems the link died or it is saturated, atleast i got the download before the site went down, weird

So, if you get the ear speaker working i will flash it on my Honor 4c, and try it for daily use
Sent from my Honor 4c using Tapatalk.

link error?
link no funciona?

Please report bugs to Xepeleato only with a logcat file. There are free Apps for logcats available in playstore. The Dev can only fix bugs if he knows what went wrong.

http://lineageos.org/Update-and-Build-Prep/
We will NOT be shipping root baked into the ROM.
Root will be a downloadable zip based install similar to gapps installation (only need to flash it once).
Home builders that want to bake su back into the ROM can use the command ‘export WITH_SU=true’ prior to building.

Link is not working

Is there ota updates yet?

Btw https://stats.lineageos.org/
84. hi6210sft 163

panchovix said:
seems the link died or it is saturated, atleast i got the download before the site went down, weird
Click to expand...
Click to collapse
Can you please upload it somewhere

The link is fixed, the backend server died in the middle of the night, it should be fine now.
Sent from my FRD-L04 using Tapatalk

Huawei ALE L21 Update Android 7

Hy guys,
I'm new on this forum, and I'm French, so sorry for my English if is not very good. I have Huawei P8 lite ALE L21. So I installed Lineage OS 14.1 UNOFFICIAL on my Huawei. But i have some questions. This versions of LIneage OS is UNOFFICIAL, but the version of this Lineage OS can will be updated later for the new Android O or updated with new features?
And Can I install android 7 without custom rom just with update firmware?
And last questions, do you know custom rom 7.1.2 stable for Huawei ALE L21? And can will be updated?
I hope I have a answer soon, sorry for my English but I hope you'r undestanding what I'd said.
Thx a lot,
Bye ,
Polo

I have to disappoint you but there won't be probably further custom ROMs (especially Android O) . The devs are mainly focused at other devices.

And Can I install android 7 without custom rom just with update firmware?
Click to expand...
Click to collapse
P8 Lite will not be updated further, to EMUI 5.x+ (Nougat and beyond) afaik
do you know custom rom 7.1.2 stable for Huawei ALE L21?
Click to expand...
Click to collapse
The LineageOS and ResurrectionRemix ROMs are similarly stable. The problem is that they don't get actively developed any more. Make sure to use the appropriate CPU fix. (UPDATE: INCLUDED IN NEW BUILD) I'd go with RROS because it has more customisation options and is designed to work with substratum.
That said:
* GPS doesn't work
* Video Recording only works on some apps, e.g. an app called Footej Camera will become your camera option
* I couldn't recieve calls, but that might have been only for me
* Use ForceDoze to save battery
And always make sure to look around in the thread, not just the main post. There are small and big fixes hidden in there sometimes
As for android O, OpenKirin repository has an android-O branch. We shall see if we get it.
UPDATE: RROS has been updated. Maybe there's still hope for this device.
---------- Post added at 06:51 PM ---------- Previous post was at 06:37 PM ----------
Track changes in Github:
OpenKirin
haky86: here and here

[ROM] LineageOS 15.0 Huawei Y6 (2018)

Code:
/*
* Your warranty is now void.
*
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
First i want to thank @phhusson for his work on Treble GSI!
Offical supported by me:
ATU-L2x
Features:
Based on LineageOS 15.0 - Android 8.0.0
First Android ROM released for Huawei Y6 (2018).
Installation:
Unlock your Bootloader!
Download the ROM
Enter fastboot mode on your device
Flash the ROM with: fastboot flash system [LOCATION AND FILE HERE]
Your device will reboot to erecovery and will do a factory reset so make a backup of important things!
Reboot your phone after the factory reset
Enjoy!
Bugs:
I haven't found one but report me bugs please!
Download:
Build 02072018
Build 05072018 (Including GApps and SU)
Enjoy!:good:

Can you add support for ATU-L22 too?

pascua28 said:
Can you add support for ATU-L22 too?
Click to expand...
Click to collapse
It will work on ATU-L22 but I don't have this model, but you can install it
Best regards?

Hi, thanks for the nice rom.
However, I can't install google apps on it.
Care to advise how to restore it to stock rom?
Can't find any of its stock firmware on the web.
Thanks.

y62018 said:
Hi, thanks for the nice rom.
However, I can't install google apps on it.
Care to advise how to restore it to stock rom?
Can't find any of its stock firmware on the web.
Thanks.
Click to expand...
Click to collapse
You might root your boot image with Magisk, download Gapps for Android 8.0 from OpenGapps.org and flash MagicGapps Magisk module. This module will install Gapps systemlessly.
Press the thanks button if i helped

Thespartann said:
You might root your boot image with Magisk, download Gapps for Android 8.0 from OpenGapps.org and flash MagicGapps Magisk module. This module will install Gapps systemlessly.
Press the thanks button if i helped
Click to expand...
Click to collapse
Do you mean to patch the stock boot image with Magisk?
I'm not very sure about that but will check it out and try.
Thanks!

iDecrypt said:
Code:
/*
* Your warranty is now void.
*
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
First i want to thank @phhusson for his work on Treble GSI!
Offical supported by me:
ATU-LXX
Features:
Based on LineageOS 15.0 - Android 8.0.0
First Android ROM released for Huawei Y6 (2018).
Installation:
Unlock your Bootloader!
Download the ROM
Enter fastboot mode on your device
Flash the ROM with: fastboot flash system [LOCATION AND FILE HERE]
Your device will reboot to erecovery and will do a factory reset so make a backup of important things!
Reboot your phone after the factory reset
Enjoy!
Bugs:
I haven't found one but report me bugs please!
Download:
Build 02072018
Enjoy!:good:
Click to expand...
Click to collapse
Thank you can you make a video of the ROM ?

It's working for scl-l01?

Kurajmo said:
It's working for scl-l01?
Click to expand...
Click to collapse
Please learn to read. LineageOS 15.0 FOR HUAWEI Y6 2018.
SCL-L01 is Huawei Y6 2015.

Thespartann said:
Please learn to read. LineageOS 15.0 FOR HUAWEI Y6 2018.
SCL-L01 is Huawei Y6 2015.
Click to expand...
Click to collapse
It's Y6 2015 custom rom forum you know that?
For Y6 2018 Must be new forum

y62018 said:
Do you mean to patch the stock boot image with Magisk?
I'm not very sure about that but will check it out and try.
Thanks!
Click to expand...
Click to collapse
Ah. As GSI images work in another way, you will have to wait until TWRP comes for your device.
Or if your rom is already rooted you could install Magisk directly from the Rom
If you want to restore Stock you should download Ereocovery from here: https://mega.nz/#!6eplUQAB!K4hfh2s-b_sSVSJ_Xxg65sywdpJHNRKtzs2ZMRr2bVk
Flash it from Fastboot.
After that get the stock rom for your device( An update.zip that should contain an update.app)
Something like this: http://huawei-firmware.com/rom/huawei-y6-2018/atu-l21/19931
And just do what it says here
Good luck

Hi, thanks for your notes about flashing stock rom.
Will try it out once I find the update file or the firmware.
Thank you!

pascua28 said:
Can you add support for ATU-L22 too?
Click to expand...
Click to collapse
y62018 said:
Hi, thanks for the nice rom.
However, I can't install google apps on it.
Care to advise how to restore it to stock rom?
Can't find any of its stock firmware on the web.
Thanks.
Click to expand...
Click to collapse
I will upload a new build later which includes the gapps
Best regards ?

That will be nice. Hopefully with root optional.
By the way, the backlight of my phone ATU-L22 seems dimmer after flashing the LOS15.0.
Not sure it's just my phone or the rom.
However appreciate the effort in making the rom!

Kurajmo said:
It's Y6 2015 custom rom forum you know that?
For Y6 2018 Must be new forum
Click to expand...
Click to collapse
Haha?
"Y6 2015 forum" - You are completly wrong.
This is Huawei Y6 forum. All of them 2015 2017 2018
Please do not provide information that is not correct.

Kurajmo said:
It's Y6 2015 custom rom forum you know that?
For Y6 2018 Must be new forum
Click to expand...
Click to collapse
You do know that creating a new forum isn't all that easy, right?
Also even if a new forum is made it'll be a subforum in our main fourms.
Also it clearly says (2018) in the title.

Thespartann said:
Haha?
"Y6 2015 forum" - You are completly wrong.
This is Huawei Y6 forum. All of them 2015 2017 2018
Please do not provide information that is not correct.
Click to expand...
Click to collapse
Don't be mad, its not my fool you create thread in Y6 2015 forum. Without scl-l01 support rom.
It's your fault and problem not mine.
Almost all custom roms available here have support multiple Y6 version of this phone.
You are not God, and not only one Active developer here. It's big community, with many Y6 available version of this phone.
That's why i just ask.
Not like my comments? Fine, but don't be rude against other people how just ask.
That's all from me.

y62018 said:
That will be nice. Hopefully with root optional.
By the way, the backlight of my phone ATU-L22 seems dimmer after flashing the LOS15.0.
Not sure it's just my phone or the rom.
However appreciate the effort in making the rom!
Click to expand...
Click to collapse
Build 05072018 (Including GApps and SU)
Here with GApps and SU activatable with developer options

Wow..that was fast!
Will try it out, thanks a lot! :good:

y62018 said:
Wow..that was fast!
Will try it out, thanks a lot! :good:
Click to expand...
Click to collapse
No problem!

[ROM][9.0.0_r46][A2017X][OFFICIAL] Resurrection Remix 7.0.2

https://postimages.org/
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
​
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to, the LineageOS team, Omni team, SlimRoms and of course to all the supporters.​
​
see below​
​
see below​
​
see below​
https://postimages.org/
@DahakePL XDA Developers LineageOs Team Omni Team And Of Course To All The Supporters, Donators And Users​
Installation:
0. unlocked, O bootloader (universal v2 to start with or the one you prefer), suited twrp (I used the twrp3218), correct modem ...you know the drill
1. Copy RR zip, 9.0.0 gapps zip and Magisk 19.3 to your device
2. Boot into twrp recovery
3. Wipe cache, system, vendor & data
4. Flash ROM
5. Flash gapps
5a Reboot and setup phone ( if not booted first time, force reboot...and wait )
6. Flash Magisk 19.3
7. Reboot and enjoy !
Build :
A2017X RR 9.0.0 r46 v7.0.2 2019.08.12
A2017X RR 9.0.0_r46 v7.0.2 2019.08.23
RR-P-v7.0.2-20190920-axon7-Official.zip
RR-P-v7.0.2-20190922-axon7-Official.zip
RR-P-v7.0.2-20191027-axon7-Official.zip
RR-P-v7.0.2-20200112-axon7-Official.zip
Gapps : https://opengapps.org/
Magisk : https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Contributors
@raystef66
Source Code: https://github.com/ResurrectionRemix/platform_manifest
KERNEL SOURCE: https://github.com/OrdenKrieger/android_kernel_zte_msm8996 thnx @OrdenKrieger
ROM OS Version: 9.x PIE
ROM Kernel: Linux 3.18.x
ROM Firmware Required: Unlocked Bootloader, Latest TWRP Recovery
Based On: LineageOS device, vendor, kernel
Version Information : 9.0.0 v7.0.2
Status: Pure & Stable...afaik
Sec. Patches : 2020.01.01
Created : 2019.08.03
Last Updated : 2020.01.12

nice

thank you bro

Gonna try this one as well. Devs have flooded some great roms recently. thanks to all.

Thank you for this rom, I think is the best rom posted recently.
Just one thing, and sorry for the noob question and my english, I feel that GSI roms are more faster than this device specific roms, I have the vendor partition, so, should I flash treble zip in vendor first?
Sent from my Phh-Treble vanilla using Tapatalk

Any trip reports on battery standby drain and screen on time?

Phone Call Audio
I installed this ROM and loved it (I've used RR in the past).
Everything worked fine but for one major thing: while I can place and receive calls I cannot hear or be heard on said calls.
From what I've read this is likely because I have the wrong modem installed, but I cannot for the life of me determine which I should be using, so:
if I have U variant, what bootstack and modem should I flash? Any help truly appreciated!

BarbbasKid said:
I installed this ROM and loved it (I've used RR in the past).
Everything worked fine but for one major thing: while I can place and receive calls I cannot hear or be heard on said calls.
From what I've read this is likely because I have the wrong modem installed, but I cannot for the life of me determine which I should be using, so:
if I have U variant, what bootstack and modem should I flash? Any help truly appreciated!
Click to expand...
Click to collapse
If you have the U model, you need the universal bootstack and the U modem
Sent from my ZTE A2017X using Tapatalk

BarbbasKid said:
if I have U variant, what bootstack and modem should I flash? Any help truly appreciated!
Click to expand...
Click to collapse
I have a U variant and I used
A2017U_OreoModem.zip
and
A2017x_LineageOS15.1_UniversalBootstack_v2_by_DrakenFX.zip
from https://androidfilehost.com/?w=files&flid=270519
I am able to hear and be heard on calls with those and this rom.
Thanks for your work, raystef66!

eeyan said:
I have a U variant and I used
A2017U_OreoModem.zip
and
A2017x_LineageOS15.1_UniversalBootstack_v2_by_DrakenFX.zip
from https://androidfilehost.com/?w=files&flid=270519
I am able to hear and be heard on calls with those and this rom.
Thanks for your work, raystef66!
Click to expand...
Click to collapse
I appreciate you help identifying those files.
Now, however, I am getting an error when flashing RR everything flashes like normal, but at the end I get a red error:
"e2001: failed to update vendor image"
and then (obviously) a #7 error as result.
The only thing I can see that may be the cause is my device does not have a "Vendor" partition (though it didn't the first time I installed RR, either).
I'm in 3.2.1-8 by NFound then:
Flash A2017x_LineageOS15.1_UniversalBootstack_v2
Flash Modem
Flash RR
Then the error.
Any idea on how to fix this issue? I appreciate your help.

BarbbasKid said:
I appreciate you help identifying those files.
Now, however, I am getting an error when flashing RR everything flashes like normal, but at the end I get a red error:
"e2001: failed to update vendor image"
and then (obviously) a #7 error as result.
The only thing I can see that may be the cause is my device does not have a "Vendor" partition (though it didn't the first time I installed RR, either).
I'm in 3.2.1-8 by NFound then:
Flash A2017x_LineageOS15.1_UniversalBootstack_v2
Flash Modem
Flash RR
Then the error.
Any idea on how to fix this issue? I appreciate your help.
Click to expand...
Click to collapse
Use the PARTY vendor creation tool and take 500Mb from your System
Sent from my ZTE A2017X using Tapatalk

@raystef66 what's your preference between this boy and sl!m 8? I just saw this now so I'm a bit late to the party

Mazupicua said:
@raystef66 what's your preference between this boy and sl!m 8? I just saw this now so I'm a bit late to the party
Click to expand...
Click to collapse
:cyclops: you're not late to the party at all. The rom development has got a huge boast now since we can rely on Orden's sources.
I'm on Pie ofc and not on Oreo anymore since this all is happening. Slim would be ok but get a taste of this all going from PE over RR, VIPER, Havoc, LOS16....and more in the pipeline
Choices enough. My preference till now is ViperOS PIE
So enjoy the ride

raystef66 said:
:cyclops: you're not late to the party at all. The rom development has got a huge boast now since we can rely on Orden's sources.
I'm on Pie ofc and not on Oreo anymore since this all is happening. Slim would be ok but get a taste of this all going from PE over RR, VIPER, Havoc, LOS16....and more in the pipeline
Choices enough. My preference till now is ViperOS PIE
So enjoy the ride
Click to expand...
Click to collapse
ViperOS is really great,hope for Long-term support

​
NEW BUILD 2019.08.12
RR-P-v7.0.2-20190812-axon7-Unofficial
changelog :
*android-9.0.0_r46
*latest sec. patches 2019.08.01
*fixed MAC
*key reverse on boot (recent/home/back)
*SELinux enforcing
* ...
E N J O Y

raystef66 said:
​
NEW BUILD 2019.08.12
RR-P-v7.0.2-20190812-axon7-Unofficial
changelog :
*android-9.0.0_r46
*latest sec. patches 2019.08.01
*fixed MAC
*key reverse on boot (recent/home/back)
*SELinux enforcing
* ...
E N J O Y
Click to expand...
Click to collapse
Great work. Please do not be deterred by the low interest in your pie roms thus far. I believe in time the interest will pick up. Please keep at it.

@raystef66
Thx for the ROM it's really nice. Booted on the first try. For now I have one issue though. Can't get VoLTE to work. On the lastest Liquid Remix with VoLTE MOD and Speedy vendor I have working VoLTE. I can call and receive calls. On latest Resurrection Remix, ViperOS, DotOS when I select LTE only I can't get any signal. I've tried flashing Oreo modem but that didn't help either. Without selecting this opition I can't get working VoLTE. What could be the problem here?

squicky said:
@raystef66
Thx for the ROM it's really nice. Booted on the first try. For now I have one issue though. Can't get VoLTE to work. On the lastest Liquid Remix with VoLTE MOD and Speedy vendor I have working VoLTE. I can call and receive calls. On latest Resurrection Remix, ViperOS, DotOS when I select LTE only I can't get any signal. I've tried flashing Oreo modem but that didn't help either. Without selecting this opition I can't get working VoLTE. What could be the problem here?
Click to expand...
Click to collapse
Thnx ! Afaik VoLTE works out-of-the-box on ViperOS. @Masterjuggler confirmed that to me.
On RR, DotOS I cannot confirm this. I cannot check this myself since my carrier doesn't provide this.
Also, the Volte Mod isn't suited for device specific roms like the ones mentioned above.
So try ViperOS first and see if you can get VoLTE working
EDIT : updating Viper to latest august sec patches now. So perhaps wait a little bit to flash again

raystef66 said:
Thnx ! Afaik VoLTE works out-of-the-box on ViperOS. @Masterjuggler confirmed that to me.
On RR, DotOS I cannot confirm this. I cannot check this myself since my carrier doesn't provide this.
Also, the Volte Mod isn't suited for device specific roms like the ones mentioned above.
So try ViperOS first and see if you can get VoLTE working
EDIT : updating Viper to latest august sec patches now. So perhaps wait a little bit to flash again
Click to expand...
Click to collapse
First I tried all these ROMs without VoLTE Mod and then I tried with the Mod. When I choose LTE in IMS app I simply lose signal (No Service). It doesn't matter if it's RR, ViperOS or DotOS. Apart from this on ViperOS somehow Pixel Launcher was force closing.

squicky said:
@raystef66Can't get VoLTE to work.
Click to expand...
Click to collapse
Like ray said, I had it working fine for me. I even confirmed I had the ims LTE service registration in the phone hidden settings. Didn't have to change anything in the settings, worked on the first boot out of the box. I'm on a t-mobile based carrier for what it's worth.