(SOLVED) So I wanted to debrand my phone, and I saw this post https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903
problem is, the oem I flashed with twrp was for the p9 lite, now my phone doesn't boot inside the os, it only goes to huawei erecovery but the download always fails. I can boot to fastboot mode but everything I try to do it says command not allowed, only fastboot devices work
I hope someone can help me as I really need my phone for work, thanks very much
my original cust was C02
I also have a twrp backup I did, but I just cant get inside twrp because as soon the phone turns on it goes to erecovery
Edit: i finally resolved and I'm going to really help you if you flashed the wrong oem file just like me, just follow these steps:
1. since you installed a new oeminfo, you are gonna need to unlock the bootloader again, (just like you did the first time), but wait! here is what I did wrong, when you request an unlock code, huawei in the unlock page is gonna ask you for your imei and serial number, I was lazy and I got my imei via fastboot instead of checking the one on my phone's box, worst idea ever because when you flash another oem your imei is gonna change so that's why in the site it said sn and imei are mismatching, so take the IMEI on your phone's box and NOT via fastboot. Anyway, let's go to part 2
2. in the unlocking site they are gonna ask for a product id wich you can get by writing *#*#1357946#*#* in the phone's dialpad, but you're probably thinking "how can I do that if my phone does't boot the os?" but don't worry my brudda! just download this https://cloud.mail.ru/public/KGmS/1cEhHg1G6 , open it and chose huawei y300-0100 as product model, then put your IMEI (take the one from your phone's box!!) and it's gonna give you the product id you need in the huawei site.
3. once they give you the unlocking password, power off your huawei and connect it in your pc with your usb while holding the volume down button, you should go in fastboot mode
4. once you are in fastboot mode write in the cmd fastboot oem unlock (9982883838382365) <<(instead of this numbers write the unlocking password they gave you in the huawei unlocking site) aaaand done, you unlocked the bootloader once again.
5. if you previously had twrp (before flashing the wrong oem file) it's gonna pop up when you boot the phone, now you can use fastboot or twrp again to flash the right oem (or stock rom)
I REALLY HOPE I'M GONNA HELP YOU BECAUSE I KNOW HOW BAD IT FEELS WHEN YOU BRICK YOUR DEVICE LIKE I DID!!
Now bye everyone I need to go play soccer and I'm late
yeahboi99 said:
So I wanted to debrand my phone, and I saw this post https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903
problem is, the oem I flashed with twrp was for the p9 lite, now my phone doesn't boot inside the os, it only goes to huawei erecovery but the download always fails. I can boot to fastboot mode but everything I try to do it says command not allowed, only fastboot devices work
I hope someone can help me as I really need my phone for work, thanks very much
my original cust was C02
I also have a twrp backup I did, but I just cant get inside twrp because as soon the phone turns on it goes to erecovery
Click to expand...
Click to collapse
FRP status? (in fastboot)
Phone status? (in fastboot)
unlock the bootloader again, even if it says its locked, after that fastboot should work fine. then you can try again booting into twrp and flash the right oeminfo
Alex261099 said:
FRP status? (in fastboot)
Phone status? (in fastboot)
Click to expand...
Click to collapse
Hi thanks for the reply
when I open fastboot under the little android guy it says:
PHONE Unlocked
FRP Unlock
yeahboi99 said:
Hi thanks for the reply
when I open fastboot under the little android guy it says:
PHONE Unlocked
FRP Unlock
Click to expand...
Click to collapse
firstly try to unlock the bootloader
if nothing happens
a. start praying
b. relock and then unlock the bootloader.... it's the only thing that i have in mind
i'm not responsible for any damage
Striike said:
unlock the bootloader again, even if it says its locked, after that fastboot should work fine. then you can try again booting into twrp and flash the right oeminfo
Click to expand...
Click to collapse
hi thx for the tip but i'm in the huawei unlock page and it's asking me for my phone's product id, wich you can only get by dialing *#*#1357946#*#* in the dialpad
yeahboi99 said:
hi thx for the tip but i'm in the huawei unlock page and it's asking me for my phone's product id, wich you can only get by dialing *#*#1357946#*#* in the dialpad
Click to expand...
Click to collapse
have you ever unlocked your bootloader?
have you saved the code? it's the same
Alex261099 said:
have you ever unlocked your bootloader?
have you saved the code? it's the same
Click to expand...
Click to collapse
I unlocked my bootloader once but I didn't save the code, I still have the account I used the first time tho
yeahboi99 said:
I unlocked my bootloader once but I didn't save the code, I still have the account I used the first time tho
Click to expand...
Click to collapse
have you used windows for unlocking?
if yes windows 10?
if yes have you used powershell?
if yes press arrow up until you see fastboot oem unlock "number", copy the number (it's the code!!!)
if no .... idk i'll do some research
yeahboi99 said:
I unlocked my bootloader once but I didn't save the code, I still have the account I used the first time tho
Click to expand...
Click to collapse
Lesson in life: ALWAYS save the bootlocker unlock code
Good luck
Alex261099 said:
have you used windows for unlocking?
if yes windows 10?
if yes have you used powershell?
if yes press arrow up until you see fastboot oem unlock "number", copy the number (it's the code!!!)
if no .... idk i'll do some research
Click to expand...
Click to collapse
I used cmd in windows 10 and it doesn't have the arrow key
thanks for helping me XD and by the way I checked my imei on a site and it says that my device is a p9 (what the heck?) I guess I need to install some p9 files to make my phone work again?
grazie
yeahboi99 said:
I unlocked my bootloader once but I didn't save the code, I still have the account I used the first time tho
Click to expand...
Click to collapse
you should have got an email with the code in it, it was like this for me.
Striike said:
you should have got an email with the code in it, it was like this for me.
Click to expand...
Click to collapse
I got it directly in the site I also tried this method https://forum.xda-developers.com/p9/help/how-to-product-id-bricked-p9-t3561156
but when I click on commit after writing all in the huawei unlock site bars it says SN and IMEI are mismatched
I mean you really f***ed up there. I thought that you could restore the device by eRecovery but If you would do that you would brick it completely bc it would Download everything for the p9...
you can't do anything without the unlock Code.
You could otherwise try to force upgrade via dload
---------- Post added at 09:05 PM ---------- Previous post was at 09:02 PM ----------
You could try this Generator https://cloud.mail.ru/public/KGmS/1cEhHg1G6
or DC unlocker (costs money)
You can use Firmware finder for PC and eRecovery DNS method to restore your phone to any firmware you want
Related
i accedently flashed stock recovery as in ramdisk recovery partition in twrp, now there no recovery , please help !
Flash stock recovery again!
In fastboot mode type: fastboot flash recovery_ramdisk recovery.img.
BS4388 said:
Flash stock recovery again!
In fastboot mode type: fastboot flash recovery_ramdisk recovery.img.
Click to expand...
Click to collapse
yeah sir i know , but my frb is locked and even cant enable in settings , oem option is untouchable , it cant be enabled , please help , wht should i do , and also i am on kingvip rom
Snober said:
yeah sir i know , but my frb is locked and even cant enable in settings , oem option is untouchable , it cant be enabled , please help , wht should i do , and also i am on kingvip rom
Click to expand...
Click to collapse
In this case I am unable to help you, but you can use dc-unlocker paid service.
It is here:
https://www.dc-unlocker.com/huawei-android-phone-frp-unlock
Sorry I never used it so can't give more information, you have a look and decide.
@Snober
you have now FRP-Lock ?
have you twrp/backup from last state (before install kangvip)
then test twrp/restore and look if phone work FRP=unlock
it is better if you need help - give more info : what is your build ? LLD-xxxxxxxx / what is delivered OS ( first delivered "7.xx", current "8.xx")
JamesBott said:
@Snober
you have now FRP-Lock ?
have you twrp/backup from last state (before install kangvip)
then test twrp/restore and look if phone work FRP=unlock
it is better if you need help - give more info : what is your build ? LLD-xxxxxxxx / what is delivered OS ( first delivered "7.xx", current "8.xx")
Click to expand...
Click to collapse
No sir i don't have backup of last state. And i can't go to twrp as i installed stock recovery
My build is 8.0.0142 c675 indian version
Now there is another problem now. I searched for solutions and got the answer as to relock bootloader. Then i relocked it with fastboot cammand. Now the phone is bricked and restarting to erecovery after honor logo. Currently status is phone relocled and frp lock in fastboot.
Please help
@Snober
sorry, now you have big problem !
Relock Bootloader is the greatest Bull**** by phones ! (my opinion !) if you relock bootloader WITH damage-rom you have a "damage-phone" !!!
please search "repair bootloop with bootlooder relock".
for future if your phone again work
- unlock bootloader AND let it open
- download your build FULL-Update (now you have backup for repair - if needed)
this 2 point's is very important
i think you have 1 chance to self-repair : search "recovery_ramdisk_BKL-L04_nocheck.img"
but - this is no simple. you must read and understand before you do ! I DONT KNOW if this work for you !!!
@JamesBott
Isn't it possible to unlock the bootloader again after relocking?
@BS4388
usually yes, but if you relock bootloader WITH damage-rom you have a "damage-phone" !!!
that's the point. if user install dev-rom and this work not 100% good AND then relock bootloader ...
if now bootloader locked - you need "fastboot flash oem unlock your-unlock-code"
if you have FRP-lock you dont can "fastboot flash xyz"
my friend have many "help me" from other user with this problem
he found the way with "recovery_ramdisk_BKL-L04_nocheck.img" and say - this work only if on phone twrp installed BEFORE error AND boot to twrp work
usually you can bootloder unlock and relock with your-unlock-code many (not once only)
JamesBott said:
@BS4388
usually yes, but if you relock bootloader WITH damage-rom you have a "damage-phone" !!!
that's the point. if user install dev-rom and this work not 100% good AND then relock bootloader ...
if now bootloader locked - you need "fastboot flash oem unlock your-unlock-code"
if you have FRP-lock you dont can "fastboot flash xyz"
my friend have many "help me" from other user with this problem
he found the way with "recovery_ramdisk_BKL-L04_nocheck.img" and say - this work only if on phone twrp installed BEFORE error AND boot to twrp work
usually you can bootloder unlock and relock with your-unlock-code many (not once only)
Click to expand...
Click to collapse
Well, I think @Snober can still revive his H9L by flashing a stock firmware using a paid service such as dc-unlocker bypassing the frp lock.
@BS4388
i dont know if dc-unlocker work with frp lock.
but i think it is a test worth - only it cost 15€ (ca. 15$) (if not work only 15€ lost - new phone cost 230€ [in germany])
i think if it's not work, dc-unlocker rewrite money to user-account. but my last dc-unlocker use a little time before now
I am sending my phone to friend as there is no service center in my location .
Should I send .
Can the phone be warranty as my phone status in fastboot is phone relocked and frp lock .
Will they detect the phone was unlocked or something like that . I mean will any problems comes . ?
Got My phone repaired in service center for free. They didn't see as the phone was in relocked state. So happy ?
this is very very good for you
BEFORE you any things do in future with your phone - YOU NEED FULL-UPDATE on your PC
JamesBott said:
this is very very good for you
BEFORE you any things do in future with your phone - YOU NEED FULL-UPDATE on your PC
Click to expand...
Click to collapse
Yeah, i know now, thats why i will not do anything stupid till then!!,Thanks for the support
Snober said:
my frp is locked, oem option is untouchable
Click to expand...
Click to collapse
Snober said:
Got My phone repaired in service center for free
Click to expand...
Click to collapse
For future reference: Stock ROM appears to require a network connection in order to enable FRP, so, connect with WiFi and it should become touchable.
noobington said:
For future reference: Stock ROM appears to require a network connection in order to enable FRP, so, connect with WiFi and it should become touchable.
Click to expand...
Click to collapse
Nah. Tried that. Not working
Hi
I have a BIG problem with my P10 (L29C432) on Oreo 365.
Tried downgrade to nougat through Firmware Finder but update failed. Now i have this warning at every reboot.
I have LOCKED bootloader (never rooted phone). And i cant get bootloader unlock code (website not working).
Also cant enter fastboot mode because of that error.
Is there anyway to RESTORE phone with locked bootloader? I have tried to flash previous firmware with sdcard method (hold power,+,- keys) but update fails everytime.
Is there other way to flash new firmware?
I can use phone but at every reboot i get this message?
If there is no other way to flash new firmware than with unlocked bootloader... Where to get code for unlocking bootloader?
Thanks.
Edit:
I can enter fastboot mode but my bootloader is locked.
you have to unlock bootloader by sending all the needed info per email.
you need to send them IMEI, model version, S/N number, and product id and request for bootloader unlocking code this email: [email protected]
next time read about how to rollback to nougat...
Thank you. So I need to unlock bootloader.
Will try to get code.
tomzzi said:
Thank you. So I need to unlock bootloader.
Will try to get code.
Click to expand...
Click to collapse
If you don't have your "product id", you can't have the code for unlock the bootloader :/
The "Product ID" is a code into the system info on android :s
I am waiting for code from Huawei. They will send me code in next days...
you can get product id on imei24. com by typing your imei.
Now i have another problem. I think phone is "dead" now. Unuseable.
Tried to root phone and now nothing works.
Phone does not recognize SIM card at all.
If I go into settings and system information there is no IMEI number?
Can i restore this?
Or need to take it to service center? Or dead phone?
send the device against wall. Buy another one and forget averything about rooting and unlocking bootloader. Its for your safety, trust me.
I have experience with rooting and flashing phones (Sony). Never had problem.
So there is no way to restore phone?
maybe in repair store. Never heard about bricked device without imei. You can still try to flash original firmware.
I have a Huawei Mate 10 wich after hard brick (COM1) 6 mounth ago wake up himself!!!
Fastboot is works
Bootloader locked
eRecovery works
Stock recovery works
I have a my phone bootloader key
But DC Phoenix not flash any update.app or board.dgtks file (DC gives evrytime ERROR... device not supported, flashing incomplet). Flashing stops befor DC phoenix can open backdoor.
In fastboot works only one command, that is FASTBOOT DEVICES, and result is 123456789ABCDEF
I can*t flash nothing in fastboot vommand line: gives me error for example:
FASTBOOT FLASH OEMINFO OEMINFO.IMG
sending `oeminfo` 378kb...
OKAY
Writing `oeminfo`...
FAILED remote: Command not allowed
Any fastboot command ends with that error
eRecovery get errors after try flash WIFI DNS firmware finder.
Device lost all: oeminfo, vendor, IMEI, model
And only founded information by DC/HCU/fastboot is device name 0123456789ABCDEF
What i can to do to fix that?
Thanks
Have you tried an update via erecovery?
mikaole said:
Have you tried an update via erecovery?
Click to expand...
Click to collapse
Yes, of course i tryed. But i said...nothing is works. All methods gives error
I know my bootloader code, but i dont change to use it for open.
OEMINFO is damaged, lost all device information parameters
Edkalax said:
Yes, of course i tryed. But i said...nothing is works. All methods gives error
I know my bootloader code, but i dont change to use it for open.
OEMINFO is damaged, lost all device information parameters
Click to expand...
Click to collapse
You should try the test point method that wr are discussing here - > https://forum.xda-developers.com/mate-10/how-to/discussion-hard-brick-infos-t3789044/page28
Pretoriano80 said:
You should try the test point method that wr are discussing here - > https://forum.xda-developers.com/mate-10/how-to/discussion-hard-brick-infos-t3789044/page28
Click to expand...
Click to collapse
YES, i can access to testpoint, but what i can do next? DC phoenix and board with COM1? Thats no working, or works?
Edkalax said:
YES, i can access to testpoint, but what i can do next? DC phoenix and board with COM1? Thats no working, or works?
Click to expand...
Click to collapse
Yes, you must flash the board with DC Phoenix. And if you don't have the nvme backup, then avoid flashing that when you flash the board.
Follow the latest posts from that thread, to understand how to put it in COM1 with the test point.
Pretoriano80 said:
Yes, you must flash the board with DC Phoenix. And if you don't have the nvme backup, then avoid flashing that when you flash the board.
Follow the latest posts from that thread, to understand how to put it in COM1 with the test point.
Click to expand...
Click to collapse
Ok, yes i know about all that you say me, but 6 month ago if my phone is hard bricked, i tryed with COM1 and over world i think trying with my 10 000 peoples or more do that, but DC Phoenix gives ERROR: Bootloader flashing incompleted
Today, my phone wake up, that is amazing, but still have problem about wghat UP my post im starting
Edkalax said:
Ok, yes i know about all that you say me, but 6 month ago if my phone is hard bricked, i tryed with COM1 and over world i think trying with my 10 000 peoples or more do that, but DC Phoenix gives ERROR: Bootloader flashing incompleted
Today, my phone wake up, that is amazing, but still have problem about wghat UP my post im starting
Click to expand...
Click to collapse
That COM1 was kind of "fake" and Phoenix couldn't flash anything. With test point it should work just fine.
Pretoriano80 said:
That COM1 was kind of "fake" and Phoenix couldn't flash anything. With test point it should work just fine.
Click to expand...
Click to collapse
For knowing to all. Testpoint not help, tryed
@Edkalax
Did you tryed a working dload image for your model in dload-firmware mode?
-with a build GREATER than the one you previously were on with your ALP ?
I don't know if your cust was blanked like boardnumber and imeis in your previous doing with your phone and what it does imply for dload images which are normally not cross cust compatible...
If bootloader is locked that's the reason why you can't flash. You'd have to unlock it.
Also, oeminfo can not be flashed with fastboot with "regular" unlock.
oslo83 said:
@Edkalax
Did you tryed a working dload image for your model in dload-firmware mode?
-with a build GREATER than the one you previously were on with your ALP ?
I don't know if your cust was blanked like boardnumber and imeis in your previous doing with your phone and what it does imply for dload images which are normally not cross cust compatible...
Click to expand...
Click to collapse
Yes i tried DLOAD with SD card and 3 buttons Vol +; Vol -; Power...not flashed, getting information failed
ante0 said:
If bootloader is locked that's the reason why you can't flash. You'd have to unlock it.
Also, oeminfo can not be flashed with fastboot with "regular" unlock.
Click to expand...
Click to collapse
I have bootloader code for my phone, but i cant use it. How i do that?
Edkalax said:
I have bootloader code for my phone, but i cant use it. How i do that?
Click to expand...
Click to collapse
Well, it's fastboot oem unlock UNLOCK_CODE, but if you tried that already it won't work.
If your oeminfo is corrupt that might be why, as it reads imei and SN from oeminfo to calculate unlock code.
return in warranty if bootloader locked
the only fix is to send it to huawei service what ever bootloader locked or unlocked
i received my mate 10 ( hard brick ) today from huawei service ,, they replaced Motherboard cos still under warranty
---------- Post added at 11:43 PM ---------- Previous post was at 11:38 PM ----------
one more thing ,, tried to fix it with all paid &free tools available but No .
the only solution is to send it to huawei service and do not mention any thing about unlocked bootloader . and they will fix it
Hello.
i have a Huawei P10. [VTR-L29 9.0.1.159(C185E3R1P9)]. I updated it using hisuite and firmware finder via erecovery 2 weeks ago, then recently i tried to check for updates in hisuite, an update is available, with the same build number(developer) with size of 880mb and i updated it, after completion of update, phone restarts, verify installation packages and proceed with update installing, after 99% phone restarts again and not turning on itself, i tried manually turning it on, not successful. so I tried plugging it in my computer, hisuite detects it, and system recovery is the only option. i tried but it failed, and should be taken to the service center.
What should I do?
-my phone was purchased abroad
-warranty expired a year ago
-i dont have the box of it and the imei infos.
If anyone can help me, please I need it. THANKS
itsjhndnllclrg said:
Hello.
i have a Huawei P10. [VTR-L29 9.0.1.159(C185E3R1P9)]. I updated it using hisuite and firmware finder via erecovery 2 weeks ago, then recently i tried to check for updates in hisuite, an update is available, with the same build number(developer) with size of 880mb and i updated it, after completion of update, phone restarts, verify installation packages and proceed with update installing, after 99% phone restarts again and not turning on itself, i tried manually turning it on, not successful. so I tried plugging it in my computer, hisuite detects it, and system recovery is the only option. i tried but it failed, and should be taken to the service center.
What should I do?
-my phone was purchased abroad
-warranty expired a year ago
-i dont have the box of it and the imei infos.
If anyone can help me, please I need it. THANKS
Click to expand...
Click to collapse
Hope that bootyloader still working, else there's a chance for you to get another phone.
If I had to go thru what you have today... I would try to flash Emui 9 based RR or Los just to revived while enjoying the pure android interface.
If all else fails... Go back to basic maybe there is a thing or two that you've missed
fr3ker said:
Hope that bootyloader still working, else there's a chance for you to get another phone.
If I had to go thru what you have today... I would try to flash Emui 9 based RR or Los just to revived while enjoying the pure android interface.
If all else fails... Go back to basic maybe there is a thing or two that you've missed
Click to expand...
Click to collapse
forgot to include that my bootloader is locked, my bad fastboot and adb only detects my phone. thanks for replying btw
itsjhndnllclrg said:
forgot to include that my bootloader is locked, my bad fastboot and adb only detects my phone. thanks for replying btw
Click to expand...
Click to collapse
a better reason to get it unlocked isn't it?
fr3ker said:
a better reason to get it unlocked isn't it?
Click to expand...
Click to collapse
how can I unlock it? like what method?
itsjhndnllclrg said:
how can I unlock it? like what method?
Click to expand...
Click to collapse
Can you get to the bootyloader or recovery? As long as bootyloader still working there's still a chance for revival.
You can try flash stock recovery & try to get it to flash the stock fw from it.
I have solution
contanct to me
fr3ker said:
Can you get to the bootyloader or recovery? As long as bootyloader still working there's still a chance for revival.
You can try flash stock recovery & try to get it to flash the stock fw from it.
Click to expand...
Click to collapse
my bootloader in locked, i havent unlocked it before, is there any way to unlock it without spending money? the only thing i know , it is detected in fastboot and also in dc unlocker.
itsjhndnllclrg said:
my bootloader in locked, i havent unlocked it before, is there any way to unlock it without spending money? the only thing i know , it is detected in fastboot and also in dc unlocker.
Click to expand...
Click to collapse
I don't see any articles on for unpaid versions to unlock the bootloader. The only safe & easy is thru dcunlocker.
Hav u tried boot to erecovery & see if it can recover that stock firmware??
fr3ker said:
I don't see any articles on for unpaid versions to unlock the bootloader. The only safe & easy is thru dcunlocker.
Hav u tried boot to erecovery & see if it can recover that stock firmware??
Click to expand...
Click to collapse
I tried erecovery as you said but I failed to do so, the only hope I think is just the fastboot mode. also, I would like to ask if what option or how many credits should I get in DC Unlocker?
itsjhndnllclrg said:
I tried erecovery as you said but I failed to do so, the only hope I think is just the fastboot mode. also, I would like to ask if what option or how many credits should I get in DC Unlocker?
Click to expand...
Click to collapse
I spent roughly not more than 5usd for a code & that's about it. Nothing more... Now I'm happily unlocked that bootyloader :good:
I think the only ways is thru pc or with a small payment at the huawei service centre to get that firmware up and running again.
fr3ker said:
I spent roughly not more than 5usd for a code & that's about it. Nothing more... Now I'm happily unlocked that bootyloader :good:
I think the only ways is thru pc or with a small payment at the huawei service centre to get that firmware up and running again.
Click to expand...
Click to collapse
is this the only required credits to unlock bootloader? see attached photo
and after you pay for credits, you will get unlock code? and use that unlock code to unlock bootloader in fastboot mode?
itsjhndnllclrg said:
is this the only required credits to unlock bootloader? see attached photo
and after you pay for credits, you will get unlock code? and use that unlock code to unlock bootloader in fastboot mode?
Click to expand...
Click to collapse
Yeah that's just about it. Safe keep the code very carefully.
fr3ker said:
Yeah that's just about it. Safe keep the code very carefully.
Click to expand...
Click to collapse
Hello, I just wanna make sure that I will get the unlock code but I dont know where I should get it. I dont know what tool should I use, HCU Client? , DC-Unlocker? or DC-Phoenix? I dont wanna waste my credits. THANKS
itsjhndnllclrg said:
Hello, I just wanna make sure that I will get the unlock code but I dont know where I should get it. I dont know what tool should I use, HCU Client? , DC-Unlocker? or DC-Phoenix? I dont wanna waste my credits. THANKS
Click to expand...
Click to collapse
The only app i ever used to get the unlock codes = https://play.google.com/store/apps/details?id=dc.huaweibootloadercodes
Then follow directions on how to unlock via fastboot
Hello
I purchased the device of the title already unlocked and would like to return it to stock rom and lock the bootloader but I don't have the unlock code. I followed a guide found here using an otg cable and a pendrive to return to stock in hopes that it would also lock my bootloader but it did not. The procedure completed successfully twice, 1st going from .178 to .185 and second attempt from .185 back to .178. Every time the phone was factory reset but the bootloader remained unlocked. Any ideas on how to relock the bootloader on this thing without having the unlock code?
tassos_chry said:
Hello
I purchased the device of the title already unlocked and would like to return it to stock rom and lock the bootloader but I don't have the unlock code. I followed a guide found here using an otg cable and a pendrive to return to stock in hopes that it would also lock my bootloader but it did not. The procedure completed successfully twice, 1st going from .178 to .185 and second attempt from .185 back to .178. Every time the phone was factory reset but the bootloader remained unlocked. Any ideas on how to relock the bootloader on this thing without having the unlock code?
Click to expand...
Click to collapse
That's very strange, service firmware always lock bootloader but in your case it can't. Anyway I have two suggestions for you first go to developer option and uncheck OEM Unlock option then try dload.
Second is try this method Thread Link Click here. Third and last use erecovery for stock firmware restore.
Hope this will help you.
Thanks,
goldybewon
goldybewon said:
That's very strange, service firmware always lock bootloader but in your case it can't. Anyway I have two suggestions for you first go to developer option and uncheck OEM Unlock option then try dload.
Second is try this method Thread Link Click here. Third and last use erecovery for stock firmware restore.
Hope this will help you.
Thanks,
goldybewon
Click to expand...
Click to collapse
is a bad idea uncheck "oem unlock" if you have problem on a flash and need an open bootloader for something simply you are fu..ed
goldybewon said:
That's very strange, service firmware always lock bootloader but in your case it can't. Anyway I have two suggestions for you first go to developer option and uncheck OEM Unlock option then try dload.
Second is try this method Thread Link Click here. Third and last use erecovery for stock firmware restore.
Hope this will help you.
Thanks,
goldybewon
Click to expand...
Click to collapse
Hello and thanks for your answer. How do you suggest to follow the second method as I am already on emui 9.1?
maurydes said:
is a bad idea uncheck "oem unlock" if you have problem on a flash and need an open bootloader for something simply you are fu..ed
Click to expand...
Click to collapse
My lord he doesn't know BL Code and desperately trying to lock it.:laugh:
tassos_chry said:
Hello and thanks for your answer. How do you suggest to follow the second method as I am already on emui 9.1?
Click to expand...
Click to collapse
Hi did you tried above methods? What's the result? If not try TWRP tool which I've suggested you.
Another guide for you follow this link CLICK HERE.
I personally advise don't lock bootloader, if you don't know code ask your seller for it.
Thanks,
goldybewon
Hi. I'm in the same situation. I have a Huawei P30 Pro that came with an unlocked bootloader. The yellow message at startup is really disturbing. I would like to relork the bootloader but in vain. The fastboot oem relock command does not work. I flashed the firmware in ota and also by erecovery but nothing works. Recently I noticed on the back of the phone the inscription NOT FOR SALE. I don't know if it has anything to do with it or not.
Translated with www.DeepL.com/Translator (free version)
Hi guys,
Sorry for this stupid question but how do you check your bootloader status on this device?
fastboot oem relock command need oem bootloader code.
you can try with full ota upgrade via OTG via Dload metod. long press the volume up key + volume down key + power button.
Choose the right firmware ,same country of your PHone (example europe C432).
But you are very lucky to have an P30 pro unlocked...don't relock.....
look here
https://androidhost.ru/search.html
torytory said:
Hi. I'm in the same situation. I have a Huawei P30 Pro that came with an unlocked bootloader. The yellow message at startup is really disturbing. I would like to relork the bootloader but in vain. The fastboot oem relock command does not work. I flashed the firmware in ota and also by erecovery but nothing works. Recently I noticed on the back of the phone the inscription NOT FOR SALE. I don't know if it has anything to do with it or not.
Translated with www.DeepL.com/Translator (free version)
Click to expand...
Click to collapse
tassos_chry said:
Hello
I purchased the device of the title already unlocked and would like to return it to stock rom and lock the bootloader but I don't have the unlock code. I followed a guide found here using an otg cable and a pendrive to return to stock in hopes that it would also lock my bootloader but it did not. The procedure completed successfully twice, 1st going from .178 to .185 and second attempt from .185 back to .178. Every time the phone was factory reset but the bootloader remained unlocked. Any ideas on how to relock the bootloader on this thing without having the unlock code?
Click to expand...
Click to collapse
lets exchange phones i'll give you a locked one gimme your unlocked one friend
so, how can you do relock if you do not have the code? I have the same problem...