this issue happen when ever i check adaptive brightness and go from a lighted room to dark room it happens fast and only one time
uncheck adaptive brightness and the problem goes away ! does this happen to all droid turbo users, maybe the issue is how fast is brightness sensor.
Related
So I just got Tasker and I've been playing around with the light sensor and I've noticed something strange. If I set the display brightness is below 12% (12% is the lowest brightness setting in display settings), the light sensor stops working. Has anyone else noticed this?
It would be nice to be able to set the display brightness to 0% to save battery and still be able to use the light sensor. I'm running Perception 10.1 with glitterballs OC/UV kernel.
(I'm using Extended Controls to set and see the brightness %)
Dc5e said:
So I just got Tasker and I've been playing around with the light sensor and I've noticed something strange. If I set the display brightness is below 12% (12% is the lowest brightness setting in display settings), the light sensor stops working. Has anyone else noticed this?
It would be nice to be able to set the display brightness to 0% to save battery and still be able to use the light sensor. I'm running Perception 10.1 with glitterballs OC/UV kernel.
(I'm using Extended Controls to set and see the brightness %)
Click to expand...
Click to collapse
The lowest I could go is 8% using brightness level widget. If I am not wrong, 0% would be screen off. U could use "screen filter" app to further reduce brightness at night so it does not strain eyes. This lets u go as dark as u want, even upto literally where u cannot see anything on screen.
hello. today I saw that after playing and the screen is blackened . I always bring the manual and the maximum brightness . happens you know ?
Maybe your low battery mode was on...
As far as the device gets warmer, the screen dims automatically to prevent overheating.
I've noticed the LED brightness varies. I like my brightness to the max. I did notice one day that once the Power Saving is enabled, the LED gets dimmer. I have the Power Saving feature to turn on only when it reaches 20%. Anyways, most of the time I barely hit that mark before I charge it up again. I notice that sometimes I will have a very bright LED notification and other times it's not as bright. Is there any way to force it to be bright all the times (except when Power Saving kicks in of course)? Auto brightness on the screen is off by the way. Not sure if that would affect the LED brightness but it's off.
I am pretty sure the notification LED is also controlled by screen brightness. That way you don't get blinded at night by it. Also just so you know with auto turned off, even at full brightness you will have issues in sunlight. If you set it to auto, in sunlight you will get about 30% more brightness then you would just set at max.
Solarenemy68 said:
I am pretty sure the notification LED is also controlled by screen brightness. That way you don't get blinded at night by it. Also just so you know with auto turned off, even at full brightness you will have issues in sunlight. If you set it to auto, in sunlight you will get about 30% more brightness then you would just set at max.
Click to expand...
Click to collapse
I could understand that if the auto brightness was enabled, but it's not and the LED brightness fluctuates.
I've had this weird glitch with adaptive brightness and it seems to happen occasionally. When adaptive brightness is enabled the brightness get's set to 70% ( Estimate ) This doesn't happen all time I would say once a day. When I try and lower the brightness it will not get lowered until I turn adaptive brightness off. The only way I can get adaptive brightness to work correctly is when I power cycle the device. At first I thought it was the light sensor was malfunctioning, but did a test and it seems to be functioning properly.
Things that I have tried:
- *#0*# then went to Sensor then light senor. Confirmed that the sensor is working
- I also cleared data in device care via settings > apps
- Wiped cache partition via recovery
Any ideas? wiping the device is a last resort
Bump
dia_naji said:
I've had this weird glitch with adaptive brightness and it seems to happen occasionally. When adaptive brightness is enabled the brightness get's set to 70% ( Estimate ) This doesn't happen all time I would say once a day. When I try and lower the brightness it will not get lowered until I turn adaptive brightness off. The only way I can get adaptive brightness to work correctly is when I power cycle the device. At first I thought it was the light sensor was malfunctioning, but did a test and it seems to be functioning properly.
Things that I have tried:
- *#0*# then went to Sensor then light senor. Confirmed that the sensor is working
- I also cleared data in device care via settings > apps
- Wiped cache partition via recovery
Any ideas? wiping the device is a last resort
Click to expand...
Click to collapse
The Twilight blue filter works wonders with adaptive brightness on your phone. I love it.
I've seen a lot of talk about adaptive brightness turning itself off but my problem is the opposite, it won't go off. When I go outside it's almost impossible to see the screen because it's adjusting when I have adaptive brightness turned off. I like a very bright screen and keep my brightness set the to the max but it refuses to stay that bright outside. And for what it's worth it always shows that brightness at max but again you can tell it's adjusted on its own. Any ideas?