Related
Hi, I've bought recently this phone and wanted a sturdy screen, preferably a glass tempered one but I've got no idea what brands to go for or if those that you can buy cheap on ebay are enough. I'm a bit clumsy so the possiblity of it slipping out of my hand by accident and falling on its screen is there. If anyone can give some input based on experiences, that'd be great.
Cheap plastic ones from amazon always seem to work fine on all my devices.. When they get scratched I have no issues throwing on a new one.
They are cheap but keep the screen flawless
HenryLeonheart said:
Hi, I've bought recently this phone and wanted a sturdy screen, preferably a glass tempered one but I've got no idea what brands to go for or if those that you can buy cheap on ebay are enough. I'm a bit clumsy so the possiblity of it slipping out of my hand by accident and falling on its screen is there. If anyone can give some input based on experiences, that'd be great.
Click to expand...
Click to collapse
hi, i am using nillkin H+, i bought it from amazon
Things i liked in this Nillkin :
1) my friends tempered glasses catches scratches, fades after long time use (4 months) and makes screen unusable in rain, but as nillkin is having real nano coating it helps me to operate my phone even in rain with out much problem
2) i bought a tempered glass before worth 270inr from ebay it was good to look, but when i was about to remove it as its not having Nano coating on it, then i observed that it cracked and formed small powder fragments on edges when i tried to remove it with hard plastic :silly:
later i installed nillkin, had to remove this also as i didnt manage to fit it perfectly on my screen.. i used the same hard plastic, this time Nillkin tempered didnt break nor atleast formed any tiny fragments, i lifted it and set again with out any problem
these are my observing on my tempered glass
I bought a tempered glass one for around $3 on eBay, haven't gotten it yet. I don't know if the more expensive ones are better, but better can mean 2 things. Either that it's stronger, so won't break easily; or that it protects the phone better. I doubt one will protect the phone more than the other.
Sent from my MotoG3 using XDA Free mobile app
hossman said:
Cheap plastic ones from amazon always seem to work fine on all my devices.. When they get scratched I have no issues throwing on a new one.
They are cheap but keep the screen flawless
Click to expand...
Click to collapse
I do the same thing. No problems yet.
I bought a nillkin H+ but removed it after a while because the phone screen is much less oleophobic. With the screen protector on, the fingerprints were extremely annoying, at least on my sample.
So can anyone recommend a really good high quality glass screen protector without flaws? If there is none then i'll order motorola official flip shell...
amirprog said:
So can anyone recommend a really good high quality glass screen protector without flaws? If there is none then i'll order motorola official flip shell...
Click to expand...
Click to collapse
The $3 ones on eBay don't have flaws. I have one and I know other people who have them, no one has any problems with them. Just first learn how to put it on so you don't break it.
Sent from my MotoG3 using XDA Free mobile app
Undersized
I bought a tempered glass one from an online (no brand). It's undersized, about 1.5mm all around. Probably useful to allow a case to grip the front edge, but the description didn't say so. I feel cheated, but for the price it'll do.
My previous tempered glass ones (branded) were excellent protection, and felt better on my finger than the plastic ones.
[edit] I forgot to say, the shape is one with cut-out north of the top speaker, rather than the others I've seen with speaker hole.
Moto G Premium Quality Screen Protector is Anti Glare Matte edition in my recommendation.
it Protects your device from scratches & dust. Easy to Apply , Fits perfectly and requires no cutting. Comes with a cleaning cloth and application card. Easily removable with no sticky residue or marks
Tempered glass screen protector from amazon
I've been using a SPARIN tempered glass screen protector since I got my moto g in August. (It's about $8 on amazon; unfortunately I can't post a link, but it should be easy to find)
I've managed to crack it in at least 8 places (my phone falls a lot), but it hasn't picked up any scratches yet, and it's protected the actual glass underneath. If you're even a little proficient at holding things, it should be fine.
Snakehive protector
I've only had it a few days, but I bought a Snakehive tempered glass protector for my new G3, from their Amazon store. Very pleased so far. It has cutouts for the mouthpiece at the bottom and for the earpiece, light sensor and camera at the top, although at the top it doesn't surround them for some reason, but that's only a couple of milimetres uncovered. It was a breeze to put on when compared to film protectors. I laid it over the mouthpiece and it simply eased itself into place over the rest of the screen. Seems a bargain at the current £3.95.
I'm wanting to get the flip down case from Snakehive too, assuming they get more stock in.
https://m.youtube.com/watch?v=ZQDXQyyL9wI
First day of smartphone, yes good idea to have a screen protection. But now with gorilla glass, useless.
It's my point of view.
Sent from my MotoG3 using XDA-Developers mobile app
I used and have a Mr shield or something like that from Amazon super easy too install i've had no bubbles when placing it on the phone also bought a case where there was enough space that should it fall on the screen side it's not touching the floor I've dropped my phone about 5 times over the course of a year. Took off the case and replaced the screen protector and it still looks like brand new minus where I've blindly inserted the USB cord.
10 days to 1 year since i purchased the device . never used any screen protector and been 8 month since i didnt use any case either.
no scratches
valkaizer2594 said:
10 days to 1 year since i purchased the device . never used any screen protector and been 8 month since i didnt use any case either.
no scratches
Click to expand...
Click to collapse
Yeah, just acquired this phone from roommate, and he hasn't used any screen protectors either. Otterbox commuter covering it but that's it. No scratches.
volcolm said:
Yeah, just acquired this phone from roommate, and he hasn't used any screen protectors either. Otterbox commuter covering it but that's it. No scratches.
Click to expand...
Click to collapse
my phone has some minor scuffs and little bend on bottom right corner but thats coz the phone fell from above 5 feet . must say the build quality is very solid
Honestly, you just don't need them these days. Had my G3 6 months, not a single scratch and I am hardly careful with it, gets thrown in pocket with keys and lose change, and dropped often because I am clumsy. Plenty of dents along the bezel but screen as good as new.
I've had my Note 8 for 9 days now and while I was thinking about buying a screen protector when it arrived, I must admit that I'm quite impressed by the quality of the screen. It just feels so hard to scratch, so much so that one would probably struggle trying to scratch it even on purpose. I don't really see myself scratching it by accident anytime soon, although I must admit I'm this kind of guy who never drops the phone and handles it with extreme care.
I'm just curious to read what you guys think, maybe somebody persuades me to buy a screen protector after all, who knows.
The Gorilla Glass 5 is more shatter-resistant than previous versions and that means it is softer also. I had my Note 7 only a few days before it started picking up micro scratches on the front and back. Your mileage may vary. I'm putting on a Whitestone done and a skin on the back of mine.
I bought a screen protector but am debating putting it on. I may try it and see how it goes
Many of us do fine with no protection. Others report getting scratches no matter how hard they try not to.
I've always put a protector on my previous phones but I'm using my Note 8 without a screen protector. Like you, I'm always very careful with my phone and never drop it. The pocket that I put my phone in only contains my phone; I never put loose change or key in there. My Spigen Slim Armor case protects most of the phone and keeps the screen off the table surface if I do put it face down. With all of the issues people have had with curved tempered glass screen protectors, it just seems like more hassle than it's worth. The only one I'd get is the Whitestone Dome but that costs $60 here. Bit pricey.
I always run a protectors. Better safe then sorry.
I take very good care of my stuff. If a scratch did happen you cant take it back. So there would be no way ti fit it without buying a no front glass or new phone.
With a protector you can simply remove it and put on another one.
Fwiw, 5 days and i have a scratch, no clue where it came from. Have never used screen protectors, but will now
Sent from my SM-N950U using XDA-Developers Legacy app
It's def worth it. On my S8 there was a scratch after few days and I am very careful about my phone so really don't know how it happened.
Same here...it is so minor and you cannot even feel it. Babied it too. Also a small one on the back and it had a case day 1. Something tells me it came like that
Going naked for now. Just watch out for sand, fine sand , seems to be the only thing. If it was a flat screen I would have tempered glass on it.
Sent from my Galaxy Note8 using XDA Labs
ANY sharp instrument will scratch if the point is pressed in to the display, period. It is MUCH easier to bang on it with a long blade edge and look like you did nothing than the tip of an x-acto knife. That is what those demos do. Resisting attack across a large area is really what you are seeing. Keys are small like that etc...
Finally, a big part of Gorilla Glass is that it also HIDES or better put doesnt show minor damage as much as other glass. In other words, its there you just don't see it.
I bet a screen for this will be $300-$400. How much is a protector that looks good?
Better safe than sorry. Once it's scratched it would bug the hell out of me. It's a £1000 device.
Throw a screen protector on it. In time, micro-scratches will appear on your screen if you dont!
Note FE, had it on the ironing board (and forgot about it). Folded the ironing board and it very gently slid down it onto the floor face down....very gently....resulted in a 7mm scratch.
Not got one on this yet but it does highlight how pathetically weak GG5 is.
I put one on from iq shield...works great with my ringke wave
Since its a huge pain to find a glass protector that fits and doesn't screw up touch sensitivity I just grabbed the $8 Skinomi wet install protector, works great including with the edge display and S-Pen.
I believe the micro-scratches are not the actual "glass" screen itself. It's the oleophobic coating that we see scratched.
princeasi said:
I believe the micro-scratches are not the actual "glass" screen itself. It's the oleophobic coating that we see scratched.
Click to expand...
Click to collapse
But if it still looks like a scratch....
I personally really don't get the mentality of people who put huges cases and screen protectors on their phones. Most people here are obsessive on having 'the latest' and upgrade yearly when new stuff comes out so they can have the nicest, thinnest, prettiest shiny piece of hardware - Then they go wrap it all up in a thick rubber/plastic case and make it look sh*t. Why buy a device with no bezel if you're gonna put a huge thick case bezel around it!
I've had all my smartphones without cases/screen protectors as that's how they're meant to be and to honest I look after my devices. I usually get 2 year contracts on phones and at the end of 2 years, worst case, a few micro scratches on the screen - That's it. Do these guys bubble wrap their cars? It's a phone, it's designed to be used, it'll get the odd small scratch, just enjoy it for what it is IMO.
I have dropped my Pixel XL and the screen protector cracked but the screen was fine. Same on my Nexus 6. Dropped it on it's face from about 5' and the screen protector cracked all over it but the screen remained crack free. I fell that a glass screen protector takes the abuse of a drop. Granted, I've never dropped a phone with a screen protector so not sure if they would have cracked the screen without a protector but to me, It used to be relatively cheap protection. Some of the better protectors are 40+ now so it's not as easy a decision as it used to be for me.
So got my shiny new Note 8 week ago. Also with that got the Whitestone Dome screen protector and alcantara case.
Tried to install screen protector:
1st. attempt: The screen lined up incorrectly from the bottom, tried to "lift it up to the position" just created more airbubles and the glue poured out from the sides.
After cleaning my Note 8 with the alcohol swipes, (It was a mess to try to clean the phone AND the glass screen protector)
2. attempt with the second bottle of glue..... There was a dust particle on the glue itself. Great.
Wait for a week to mobilefun to ship me another one. (while doing so i was "dry- practicing" to get it 100% correct this time)
3. attempt was a charm.... until.... when the glue spread there was 2 small air bubbles... Take the second bottle and "tap" the small air bubbles away. (while doing so being extremely nervous about that the screen protector might move or great new bubbles). Managed to get the bigger one out but there was the small one... Didn't get that out.
Light up the UV light and call it a day. Only problem is now there is small air bubble that is pretttty distracting to say the least.
So, now i am with 50€ in my account from the order. (Because i demanded that they refund me this horrible product). I am left to choose new screen protector.
My options that i have read:
- Rearth invisible defender - The problem with this is that there is "snowfall" effect and the screen is too damn sticky (according to reviews)
- IQ Shield - The problem with this is that the S-pen (according to reviews) leaves trails to the TPU protector. Because it's so soft and it will not cure overtime.
-Zagg invisible shield - Unresponsivnes and the fact that it has "raimbow" -effect on the screen.
New one that i just founded out about:
-Powerpeak Base- According to this guy (Install Jimmy is Promo's "Base Screen protector for Samsung GALAXY S8 & Note 8 here) Its pretty good. Might be ad though... Does any of you have experience on this?
The whitstone does have pretty good responsiveness and all that good stuff. But the problem is the installation and even when i tried to be 100% accurate with the installation, it still greated air bubbles. And the fact that there is a HUGE risk that the glue when cured can cause damage to the screen.... More specifically if you manage to cure the glue when the glue is over the earpiece... you are ****ed with your 1000€ phone.
I am doing the poor mans whitestone. LOCA glue and cheap amazon tempered glass. Took me two tries to get it right. So with two screens and glue, out $20. I did buy a UV lamp for dual use. My phone and girlfriends nails. I had the ZAGG on my S8+, didn't like it at all, unresponsive. But i bet if you glued it on with LOCA it would be good.
Bullitt3309 said:
I am doing the poor mans whitestone. LOCA glue and cheap amazon tempered glass. Took me two tries to get it right. So with two screens and glue, out $20. I did buy a UV lamp for dual use. My phone and girlfriends nails. I had the ZAGG on my S8+, didn't like it at all, unresponsive. But i bet if you glued it on with LOCA it would be good.
Click to expand...
Click to collapse
I am sort of guy, who can easily mess things like that up... So not going to risk it.
Galaxy Note 8 Screen Protector [2-Pack][Not Glass], Yootech [Case Friendly] Galaxy Note 8 Wet Applied Screen Protector BUBBLE-FREE for Samsung Galaxy https://www.amazon.com/dp/B0756DBXWP/ref=cm_sw_r_cp_apap_xFOJgXZGMrAdo
This one seems a little less rubbery imho.
Sent from my SM-N950U using Tapatalk
DAvid_B said:
Galaxy Note 8 Screen Protector [2-Pack][Not Glass], Yootech [Case Friendly] Galaxy Note 8 Wet Applied Screen Protector BUBBLE-FREE for Samsung Galaxy https://www.amazon.com/dp/B0756DBXWP/ref=cm_sw_r_cp_apap_xFOJgXZGMrAdo
This one seems a little less rubbery imho.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
I did check that thanks! Only problem is that i live in EU (Finland) And Amazon will not ship that item to me.... Looked up in Ebay and they will add 20€+ to the original price...
Bummer tho,.
Hello, this is Whitestone.
I am so sorry that you had a terrible experience with our product. Air bubbles can be very frustrating on a new screen protector. We are constantly trying to solve the problem of air bubbles, and the seesaw type has drastically reduced it but not fully eliminated it.
I am very thankful for your patience to give our product three tries before you made your decision and also for a detailed feedback on what became wrong.
Since you have given a lot of effort on our product, we will try and help you out if you are willing to give our product another chance.
Feel free to contact us through here, or our homepage, or any social media.
Again I am terribly sorry.
Base TGSP is a piece of shot
That Jimmy guy sounds like an infomercial
Only use skinomi wet i stall protectors.
Use it before on my note edge 4. The spen did leave marks.
But with the note 8. I dont see any marks. So either the protector is better or the tips are softer
xile6 said:
Only use skinomi wet i stall protectors.
Use it before on my note edge 4. The spen did leave marks.
But with the note 8. I dont see any marks. So either the protector is better or the tips are softer
Click to expand...
Click to collapse
do you forsee it lifting up on the edges? did you get the techskin one that comes in a twopack?
I'm currently going through a batch of clear protection film HD skins on my Note 8. Generally are average, but some dont cover the edges that well or some have too much orange peel, or some are not cut correctly. Typical chinese "dog" turd.
So far. Spigen, coverage is excellent, but suffer from a lot of orange peel. Illumi Shield , coverage is rubbish, one side ( left side ) is cut shorter than the other. But less orange peel.
Amovo front and back clear film, the worst ever. The pikeys didnt even inc a lubrication spray with their aggrssive adhesive film. Secondly the film that you remove to apply was stuck like gorilla glue to the actual film. You know, the tab that say "peel here first" and " peel here last".
I dont care less for the glass crap for curved screens, but in search of a half decent clear film currently. The search continues...
Limeybastard said:
I'm currently going through a batch of clear protection film HD skins on my Note 8. Generally are average, but some dont cover the edges that well or some have too much orange peel, or some are not cut correctly. Typical chinese "dog" turd.
So far. Spigen, coverage is excellent, but suffer from a lot of orange peel. Illumi Shield , coverage is rubbish, one side ( left side ) is cut shorter than the other. But less orange peel.
Amovo front and back clear film, the worst ever. The pikeys didnt even inc a lubrication spray with their aggrssive adhesive film. Secondly the film that you remove to apply was stuck like gorilla glue to the actual film. You know, the tab that say "peel here first" and " peel here last".
I dont care less for the glass crap for curved screens, but in search of a half decent clear film currently. The search continues...
Click to expand...
Click to collapse
I'm looking at IQShield and Skinomi right now but don't have enough info to decide on one or the other. Would love to hear about your experiences with other non-TGSPs and if you ever come across one you would recommend.
KBeckett said:
I'm looking at IQShield and Skinomi right now but don't have enough info to decide on one or the other. Would love to hear about your experiences with other non-TGSPs and if you ever come across one you would recommend.
Click to expand...
Click to collapse
Im primarily using and trying non glass type films, similar to the stuff used to protect car paint protection. My background includes being able to apply paint protection film on cars so these are all from the same mold that I have been trying. BTW, heat of a hairdryer will aid in adhering the curved edges once applied- slight tip.
I have not tried IQShield yet, sorry. So far the Spigen one fitted well coverage wise,but their film is very aggressive in the orange peel front,
I might try Skinomi next, but I have heard they cut their films short to save a few bucks.
Lets liase and share our experiences with these type of films, cheers.
Thanks for all of you for the help and responses.
Yes the IQshield and Skinomi are on the top of my list... They are around 20€ including shipping to Finland from Ebay. A bit expensive but lets see....
Im currently using IQshield version 2 (case friendly) for about a week now.
I've done a lot of wet install before so i know what to expect using this type of screen protector. Its been a week now and so far no lifting on the curve part of the screen. it is smooth to touch, sensitivity is normal and very good. Im using a VRSdesign slim case and it works well, all corners fitted very well.
I also used skinomi before and if i remember it right IQshield is more smoother than skinomi in-terms of orange peel feeling. The only problem that is s-pen will leave marks when used with this kind of screen protector. (i tried it at the very bottom and its still have mark after a week)
I can give this IQshield a 7.5/10 score. LOL
YesThisIs said:
The whitstone does have pretty good responsiveness and all that good stuff. But the problem is the installation and even when i tried to be 100% accurate with the installation, it still greated air bubbles. And the fact that there is a HUGE risk that the glue when cured can cause damage to the screen.... More specifically if you manage to cure the glue when the glue is over the earpiece... you are ****ed with your 1000€ phone.
Click to expand...
Click to collapse
I used the tip of placing painter's tape over the speaker. I covered the speaker enough to not interfere with the glass. It worked great! I do have three small bubbles after two tries but can't see them unless I try. My wife's has one bubble in about the same spot as mine. The lower left corner about 1/3 up the screen where the curve starts. There a number of ways to avoid the creation of bubbles. I couldn't say them all because I'm not an expert in LOCA glue and it's properties. Experimentation is the only way to find out.
Whitestone Dome Glass said:
Hello, this is Whitestone.
I am so sorry that you had a terrible experience with our product. Air bubbles can be very frustrating on a new screen protector. We are constantly trying to solve the problem of air bubbles, and the seesaw type has drastically reduced it but not fully eliminated it.
I am very thankful for your patience to give our product three tries before you made your decision and also for a detailed feedback on what became wrong.
Since you have given a lot of effort on our product, we will try and help you out if you are willing to give our product another chance.
Feel free to contact us through here, or our homepage, or any social media.
Again I am terribly sorry.
Click to expand...
Click to collapse
I am glad that you have started beeing more on forums and social media. I want to thank you for sending me a new one. Now i am waiting for it. Hope this time works.
To be honest, it will be difficult to actually get most tempered glass protectors to stay on this curved glass.. Its a pain and it sucks because I would actually like to get one. I just ordered the whitestore myself..., but they wont be in stock again until the 30th...
I got the PowerPeak Base and it is utter garbage. I lost atleast 30% touch sensitivity and then it just eventually slid off of my phone from me trying to swipe so hard. The middle actually dried up and there was nothing holding the middle to the phone.
I despise the wet installs. They are too soft and will leave indents as you said.. So really its either try tempered glass protectors until you find the one you want, go with indents and wet installs, or just go no screen protector like me!
I have the wet install spigen ones but I tbh would rather go with no protector than use them.
I ordered and installed this on my Note 8 : https://smile.amazon.com/gp/product/B074G1W2RC/ref=oh_aui_detailpage_o01_s02?ie=UTF8&psc=1
Along with a Spigen Tough Armor case. It seems to work well and no real screen sensitivity issues either.
twistanesh said:
do you forsee it lifting up on the edges? did you get the techskin one that comes in a twopack?
Click to expand...
Click to collapse
I get the case friendly 2pack. And havent had problems with lifting.
Had my note 8 since sept 8 and been caseless and no lifting.
Anyone planning on using a cheap protector with LOCA glue needs to check the strength of the LOCA. Some have reported they were not able to remove the protector after using some LOCA glue.
I had 3 attempts at the Dome Glass myself. The first one I got had a broken bridge. I could not get the glue in the right spot. Whitestone refunded me. I bought the next set from Amazon. Everything was perfect until I peeled the plastic off the back of the protector. There must have been a fleck of dirt near the side. I did not see it as I did not have enough light.
I sent the second one back to Amazon and just had to pay return shipping. With the third one I took a different approach. I used a totally level counter top in the bathroom. I ran the shower with hot water for about 10 minutes so the whole bathroom was steamed up. This kept the dust down. I cleaned the phone screen and when I removed the plastic from the protector, it somehow grabbed another piece of dirt. Due to the extreme lighting, I saw it and removed it before installing. It installed perfectly with no dust/dirt or air bubbles. I did the first cure with the UV light then took it out of the jig and wiped the sides, top and bottom with an alcohol pad. I then did the final cure. Not one ounce of glue seeped out. I did not protect the speaker or anything else. If this is done perfectly, this is the absolute best protector available IMHO. The problem is anything short of a perfect install will drive many of us with OCD crazy.
On Monday we traded in my Mothers iPhone and she went with a Note 8. The Dome Glass arrived today. This time, perfect install the first time. I wish Whitestone would include 2 pieces of glass per package since this is the most expensive Note 8 protector. Their CS is a bit slow but they did take care of me in the end. It's a bit of a ripoff to sell the kit for 49 but then only sell the glass and one tube of glue for 39. The refill pack should be 15-20 at the highest.
After a week, none of my edges are lifting at all. Some may be using cases that are not compatible. My protector does not touch my case at anyplace. I think cases that touch the protector have a good chance of raising the edges. Even if the case looks fine after install, if grabbing it makes the case touch the glass, it will eventually lift and get bubbles.
Received my OTAO Tempered Glass for my Note 8 Today. The Product arrived quickly and was packaged well.
The Package Included : (1) Installation Tray, (1) Glass Protector, (1) Cleaning Cloth, (1) Alcohol Wipe, (1) Sticker for dust/lint removal,
(1) Instruction Card W/Photos, (1) Thank You Card with Contact info for OTAO.
You can purchase them from here : https://www.amazon.com/Tempered-Pro...=1517931940&sr=8-3&keywords=otao+glass+note+8
The un-boxing was fun, was able to lay out everything and see what all came with the product, packaging felt premium and was well tailored to a Note 8 customer. The process to get the tray over device and screen protector on was slightly awkward and honestly if you have a steady hand you could install it without the tray IMO. I used the tray and the protector was installed perfectly center and square so at least there was 0 risk in getting it crooked or anything.
I was really worried about going to full glass protector on a infinity type screen. The curved glass has been hell to cover with anything but liquid glass (that provided 0 real protection) and not interfere with touch / operation.
The screen protector has glue 360* around the glass so there is not any movement or feeling of it being loose or poorly seated. I read other reviews where the glass had become loose or cracked and I can attest that this should NOT be the case. The only way its breaking is a drop or accident that resulted in a good bit of force onto the screen/glass. This protector IS case friendly as well, I tried it with my OtterBox as well as my UAG and neither case lifted or pushed the screen protector in any way!
Overall im really glad I tried the OTAO branded protector, as all the others do NOT have a 360* seal or the ability to work with many cases on the market, and OTAO has both and a really good price!
Check out the photos i took so you can see what to expect! The case in the photos is the UAG Clear Smoked Case btw!
Pros:
Actual Tempered Glass @ a Fair Price ( Under 15$ Shipped )
Has adhesive around the entire glass ( 360 sealed )
Touch response was unaffected / no gaps or air
Cons:
Tray is a little awkward to use, I would say try to do it without if you feel comfortable.
Adhesive around edges seems to be grabbing some lint / hair over time, kinda annoying
Screen has "Dot Matrix" and is slightly visible and certain angles.
Photos
Photos
I had one like this, another brand, it broke easy. So my question is, did you break it yet?
Mine popped off in 3 days
onlyatbenco said:
I had one like this, another brand, it broke easy. So my question is, did you break it yet?
Click to expand...
Click to collapse
I did not break it, i had it on my device for 30 days, it was really a decent glass protector, but like me2151 said i did notice the adhesive wasnt nearly as strong as i would have liked.
Otherwise it was a nice all glass protector.
I did not like i could see the dot matrix, and the installer tray was garbage.
Otherwise at the cheaper price compared to the white dome, and seeing people complain about it at 60$ + , its worth the investment for a cheaper one that may last 1/4 of the time but be easily replaced and nearly 1/6 the cost.
I'm on my second one. Not because it broke, but because it popped off when I dropped my note and I got dust beneath. Finally changed it yesterday after weeks with the dust. I know I prolly have micro scratches. I really like this one. But, oh well...
Interesting thoughts.
I am getting a new Note 8 tomorrow and this is in my shopping cart. I have been wondering about this as I have heard traditional screen protectors don't work well on the rounded glass.
dtaylorr said:
Interesting thoughts.
I am getting a new Note 8 tomorrow and this is in my shopping cart. I have been wondering about this as I have heard traditional screen protectors don't work well on the rounded glass.
Click to expand...
Click to collapse
So how did you like the OTAO screen protector?
Sent from my Galaxy Note 8 using XDA Labs
I am using the screen protector that came with the phone but I am worried that it might not be that good to rely on.
I am not taking about dropping the phone or something. All am I caring about is scratches from the pen or stuff in my pocket. Can this screen protector help against these or it is useless?
The reason I kept it, because it fit so well and it does not affect the screen quality.
Obviously experience may vary quite a bit due to different conditions. For me so far the stock protector works quite well and protects the screen from scratches.
But as I like the "Glass feeling" a bit more I'll fit a tempered glass protector sometime in the future....
Agree. I will do the same. It is just not easy to find a glass protector that actually fits
Khalid Madkour said:
Agree. I will do the same. It is just not easy to find a glass protector that actually fits
Click to expand...
Click to collapse
Well, both Amfilm and Whitestone have UV-based tempered glass protectors that fit really good, but do you want to spend the money for those?
They're not like $10 for 3 pieces or something
MasterThiefGarrett said:
Well, both Amfilm and Whitestone have UV-based tempered glass protectors that fit really good, but do you want to spend the money for those?
They're not like $10 for 3 pieces or something
Click to expand...
Click to collapse
Spending 70~100 USD to protect 1200$ is worth it but the problem these kind of screen protectors can not be found in Egypt I think so until I find a way to get them without paying much taxes and fees I will stick with the default S.protector
I remember Samsung saying that a glass screen cover would interfere with the fingerprint scanner. I'm curious as to whether or not that's actually the case...
I had problems with the finger reader. He caught the fourth, fifth time. (I added the same one a couple of times and it didn't help.) Today I took off the factory foil and magic. The reader catches off the shot every time!
NippleSauce said:
I remember Samsung saying that a glass screen cover would interfere with the fingerprint scanner. I'm curious as to whether or not that's actually the case...
Click to expand...
Click to collapse
I tried a cheap UV-based tempered glass (10 euros) and on my Note 10 it works flawless every time.
And since the S21 series has a much bigger sensor I expect it to work fine as well, I know Whitestone Dome works fine, AND the AmFilm one too.
I used Note 8 for 3 years without screen protector and had maybe 1 micro scratch that was only visible when screen off. Now still using S21U with pre installed screen protector but the feeling of it is not so good, very rubbery especially if fingers are wet. Debetaing to take it of because I have some problems with fingerprint reader too, it's not bad but sometimes it's not detecting the finger.
Make sure your case has a lip guard. That has always worked for me.
I really liked the factory fitted screen protector.
It is more than adequate to protect the screen from scratches from everyday use. Unfortunately the corner peeled off after getting caught on some fabric on the couch so I had to replace it.
I decided against a tempered glass protector for the following reasons:
1. Regular tempered glass SP interfere with the ultrasonic fingerprint reader. Go to amazon and search for s21U TP screen protectors and you'll see what i mean.
2. There are some TG screen protectors that use UV light hardened resins to stick to screen. These are supposed to be fingerprint reader friendly but the good ones like Whitestone Dome are very expensive (for a disposable item) and you have to get a perfect installation, with the resin being a potential hazard if it seeps into the phone.
The cheap ones on the other hand are usually not very good and have a thinned out layer of glass overlying the fingerprint reader that is really irritating to look at.
3. I'm not sure what that UV hardening adhesive does to the oleophobic coating on the screen over a long time.
4. TG screen protectors do not have an anti-reflective coating like the phone screen. So once you apply it, the surface becomes shiny and reflective like glossy screens. This doesnt happen with the softer TPU protectors. Maybe someone who has recently applied a TG SP can post his experience here?
3. TG also adds thickness to the screen as compared to TPU screen protectors, and this is a pretty chunky phone already.
I moved away from tempered glass protectors about 3 years ago after trying a bunch of them and have been using TPU (liquid skin type) SP since then. They are cheap, easy to install, usually come in multi-packs so you can swap them out when it gets dirty or peels off or scratches etc, without breaking the bank or feeling sorry that you have to throw away a $30 - $50 tempered glass protector that you applied with utmost care. The newer materials are also very nice to touch, virtually indistinguishable from the underlying glass.
Having said all this, I have friends that swear by tempered glass protectors and are willing to pay anything to have the feel of glass under their fingers. There's no right or wrong answer here, just what works for you.
enigmaamit said:
I really liked the factory fitted screen protector.
It is more than adequate to protect the screen from scratches from everyday use. Unfortunately the corner peeled off after getting caught on some fabric on the couch so I had to replace it.
I decided against a tempered glass protector for the following reasons:
1. Regular tempered glass SP interfere with the ultrasonic fingerprint reader. Go to amazon and search for s21U TP screen protectors and you'll see what i mean.
2. There are some TG screen protectors that use UV light hardened resins to stick to screen. These are supposed to be fingerprint reader friendly but the good ones like Whitestone Dome are very expensive (for a disposable item) and you have to get a perfect installation, with the resin being a potential hazard if it seeps into the phone.
The cheap ones on the other hand are usually not very good and have a thinned out layer of glass overlying the fingerprint reader that is really irritating to look at.
3. I'm not sure what that UV hardening adhesive does to the oleophobic coating on the screen over a long time.
4. TG screen protectors do not have an anti-reflective coating like the phone screen. So once you apply it, the surface becomes shiny and reflective like glossy screens. This doesnt happen with the softer TPU protectors. Maybe someone who has recently applied a TG SP can post his experience here?
3. TG also adds thickness to the screen as compared to TPU screen protectors, and this is a pretty chunky phone already.
I moved away from tempered glass protectors about 3 years ago after trying a bunch of them and have been using TPU (liquid skin type) SP since then. They are cheap, easy to install, usually come in multi-packs so you can swap them out when it gets dirty or peels off or scratches etc, without breaking the bank or feeling sorry that you have to throw away a $30 - $50 tempered glass protector that you applied with utmost care. The newer materials are also very nice to touch, virtually indistinguishable from the underlying glass.
Having said all this, I have friends that swear by tempered glass protectors and are willing to pay anything to have the feel of glass under their fingers. There's no right or wrong answer here, just what works for you.
Click to expand...
Click to collapse
A case with enough lip protection is good enough.
Thank you for sharing you experience. I decided to stay with the factory screen protector. It really love it as it fits the screen so well and is clear as if there was no screen protector.
enigmaamit said:
I really liked the factory fitted screen protector.
It is more than adequate to protect the screen from scratches from everyday use. Unfortunately the corner peeled off after getting caught on some fabric on the couch so I had to replace it.
I decided against a tempered glass protector for the following reasons:
1. Regular tempered glass SP interfere with the ultrasonic fingerprint reader. Go to amazon and search for s21U TP screen protectors and you'll see what i mean.
2. There are some TG screen protectors that use UV light hardened resins to stick to screen. These are supposed to be fingerprint reader friendly but the good ones like Whitestone Dome are very expensive (for a disposable item) and you have to get a perfect installation, with the resin being a potential hazard if it seeps into the phone.
The cheap ones on the other hand are usually not very good and have a thinned out layer of glass overlying the fingerprint reader that is really irritating to look at.
3. I'm not sure what that UV hardening adhesive does to the oleophobic coating on the screen over a long time.
4. TG screen protectors do not have an anti-reflective coating like the phone screen. So once you apply it, the surface becomes shiny and reflective like glossy screens. This doesnt happen with the softer TPU protectors. Maybe someone who has recently applied a TG SP can post his experience here?
3. TG also adds thickness to the screen as compared to TPU screen protectors, and this is a pretty chunky phone already.
I moved away from tempered glass protectors about 3 years ago after trying a bunch of them and have been using TPU (liquid skin type) SP since then. They are cheap, easy to install, usually come in multi-packs so you can swap them out when it gets dirty or peels off or scratches etc, without breaking the bank or feeling sorry that you have to throw away a $30 - $50 tempered glass protector that you applied with utmost care. The newer materials are also very nice to touch, virtually indistinguishable from the underlying glass.
Having said all this, I have friends that swear by tempered glass protectors and are willing to pay anything to have the feel of glass under their fingers. There's no right or wrong answer here, just what works for you.
Click to expand...
Click to collapse
nixnixnixnix4 said:
A case with enough lip protection is good enough.
Click to expand...
Click to collapse
Yes. For most purposes, I agree with you that it's enough. I used to think so too... Never used a screen protector on any of my phones. Tried the tempered glass one on my last phone but felt it was too thick and reflective, so there is away and went with a naked screen. The experience was amazing, interfacing with the screen without any barriers. At least until I got two mysterious scratches on my OnePlus 6 screen, about 2 months apart, one after the other. Never dropped the phone, didn't put it face down, just used it normally. Must've been a grain of sand in my pocket... I'm still not sure to this day what caused the scratches...
I was using a spigen case without a screen protector then. Had to live with those scratches for 2 years. It was heartbreaking to see them everytime... See attached pics.
Since that experience, I vowed never to go with the screen naked again. Maybe I was just unlucky. But the fact that it happened twice is something I cannot ignore, and cannot risk on this new phone. It's too beautiful and too expensive to gamble with, at least based on my personal experience.
Second day I had my Note 10+ it faceplanted on a rough piece of 1/8" thick aluminum angle from pocket height. The metal hit the curve portion of the screen. Oh Yeah... isn't that special?
The case soaked up some of the impact but the factory screen protect was hit and savaged.
It protected the screen, zero damage. gulp.
Been using wet apply Gorilla IQ Sheild after trying a bunch of products including Whitestone.
After 9 months it's still on and while it's due to be replaced it's held up amazing well for $5 a pop.
Unlike the other junk, it's easy to apply and line up properly
I use the Zizo Bolt case to provide to majority of the protection. Raised screen guards on all sides are needed as I learned earlier
After 1.5 years, zero damage.
enigmaamit said:
Must've been a grain of sand in my pocket... I'm still not sure to this day what caused the scratches...
I was using a spigen case without a screen protector then. Had to live with those scratches for 2 years. It was heartbreaking to see them everytime... See attached pics.
Since that experience, I vowed never to go with the screen naked again. Maybe I was just unlucky. But the fact that it happened twice is something I cannot ignore, and cannot risk on this new phone. It's too beautiful and too expensive to gamble with, at least based on my personal experience.
Click to expand...
Click to collapse
Sand will do it every time. I tried the same experiment over 2 years ago with the same results. I always use a good case and screen protector because permanent scratches pi$$ me off.
Clarification: Case with a lip everywhere and a regular TPU screen protector is great for the majority of use-cases out there. And, it is the cheapest option.
nixnixnixnix4 said:
Clarification: Case with a lip everywhere and a regular TPU screen protector is great for the majority of use-cases out there. And, it is the cheapest option.
Click to expand...
Click to collapse
And very effective when using a good case.
BDU upper pant leg cargo pockets are great for smartphones...just make sure to keep the rear facing button, buttoned or your will lose it