Related
Hi everyone.
Here's my build of TWRP 3.0.3-0 for Huawei P7.
Features:
Supports USB OTG, so you can use USB flash drive as external storage for backups, zip installations.
Added feature to make backup/restore of internal storage.
Added feature to make backup/restore of oeminfo partition. This partition contains info about vendor and current installed version. So in case if you want to rollback to 4.4.2, for example, or revert back your previous vendor version, you can just restore oeminfo from backup with 4.4.2 version or other vendor and flash appropriate firmware without flashing transition package, vendor and without getting "cust fail" error.
Combined with stock EMUI 3.1 recovery. In case of power-on by holding power + vol+ or rebooting into recovery by command or any 3rd party application: will boot in TWRP. In case of local update, OTA-update, factory reset from menu or "force update" (3buttons method): will boot into EMUI recovery. Thus you don't have to flash stock recovery before OTA-update, flashing official firmware or doing factory rest.
Off-mode charger updated from EMUI 3.1 (for 4.4.2)
custom.bin and cust symlinks are saved/restored (if they were exist) in case of Wipe/Format Data. So there is not gonna be "cust" issues after factory reset in TWRP.
Excluded SuperSU from build.
Enabled encrypted data support.
Screen lock by power button replaced with screen off.
Requirements:
Unlocked bootloader
Android 4.4.2 - 5.1.1
Installation:
Reboot in fastboot mode
Flash image via fastboot
Code:
fastboot flash recovery TWRP_P7-3.0.3-0.img
fastboot reboot
From TWRP: Press "Install" and select zip-archive
Notes:
Because internal storage is not a separate block device and just a subfolder of "userdata" partition, before you can make backup/restore of internal storage, first you should do Mount -> Data.
Download: TWRP_P7-3.0.3-0.img
For TWRP: TWRP_P7-3.0.3-0.zip
Previous:
Download: TWRP_P7-3.0.2-0.img
For TWRP: TWRP_P7-3.0.2-0.zip
Download: TWRP_P7-3.0.0-0.img
For TWRP: TWRP_P7-3.0.0-0.zip
Thanks for supportion the P7 devices, greate job
Is it possible, to restore 2.8.7.0-backups?
pokko said:
Is it possible, to restore 2.8.7.0-backups?
Click to expand...
Click to collapse
I can't tell you for sure about backups made by araca's 2.8.7.0 - I don't know his partition layouts and backup naming method, but if you were using my build of 2.8.7.0, then yes, you can.
Anyway, it's better to make a new backup, for any case...
Thanks . works great on my p7 especially the factory reset with cust .
can you explain how i can build similar twrp for the mate S . your help will be much appreciated
Hi !
Whenever I use 3buttons method my phone goes to EMUI recovery ,
Whenever I use 3rd party application my phone goes to TWRP recovery !
There is no update file on my storage so in both cases my phone should go to TWRP recovery ! What is the problem ? Please solve this !
andromodgod said:
can you explain how i can build similar twrp for the mate S . your help will be much appreciated
Click to expand...
Click to collapse
What do you mean by similar?
You'll have to make device tree to build TWRP. Mate S is much different from P7, so I think I couldn't help you with it.
mohammadsaa said:
Hi !
Whenever I use 3buttons method my phone goes to EMUI recovery ,
Whenever I use 3rd party application my phone goes to TWRP recovery !
There is no update file on my storage so in both cases my phone should go to TWRP recovery ! What is the problem ? Please solve this !
Click to expand...
Click to collapse
There is not any problem. 3 buttons method is used for "force update". If you want to boot into TWRP, use "power" + "vol+" instead of 3 buttons. Read the first post attentively!
@Kostyan_nsk_one question, why if internal storage is a subfolder of user data in recovery the size of internal storage partition is bigger of data partition?
complicazio said:
@Kostyan_nsk_one question, why if internal storage is a subfolder of user data in recovery the size of internal storage partition is bigger of data partition?
Click to expand...
Click to collapse
TWRP excludes /data/share folder from backup of /data folder. Thus, if you have a lot of photos, music, etc in your internal storage, its backup size will be greater than size of /data backup.
Kostyan_nsk said:
TWRP excludes /data/share folder from backup of /data folder. Thus, if you have a lot of photos, music, etc in your internal storage, its backup size will be greater than size of /data backup.
Click to expand...
Click to collapse
Well, thus if I want to do a nandroid backup I have to check data and internal storage, not only data partition because of default it's not selected internal memory
complicazio said:
Well, thus if I want to do a nandroid backup I have to check data and internal storage, not only data partition because of default it's not selected internal memory
Click to expand...
Click to collapse
It's not mandatoryly for nandroid backup. Depends on what kind of data you want to save. /data contains user applications and system settings; /data/share (i.e. internal storage) contains your personal data (screenshots, photos, music, videos, etc) if you didn't moved them to sd-card. It's up to you, what to backup and what not.
@Kostyan_nsk I appreciate your work. I have already built TWRP for my Huawei device but I am struggling to fix custom.bin and /data/cust symlink being destroyed after factory reset. I have placed the necessary code in partitions.cpp under Wipe partition block. Can you tell me which method you used to fix this?
@Kostyan_nsk When I do a backup in the internal memory then via es file Explorer goes into TWRP folder in sdcard0 (internal memory) it is empty, and if I go into the folder media / share / 0 / TWRP I find the backup. They are not the same thing? While if I do backup in the external sdcard its all ok.
Sent from my Paris using XDA-Developers mobile app
Hi,, I am new here ... i think this very nice .. do you tell me how is instal for my phone p7?
albelushi7 said:
Hi,, I am new here ... i think this very nice .. do you tell me how is instal for my phone p7?
Click to expand...
Click to collapse
Read first post
RangerP7 said:
Read first post
Click to expand...
Click to collapse
What is the first post?
I mean instal twrp!!
How?
If you mean Buckup I do this ?!!
I'm new don't forget this hhh
Think you
albelushi7 said:
What is the first post?
I mean instal twrp!!
How?
If you mean Buckup I do this ?!!
I'm new don't forget this hhh
Think you
Click to expand...
Click to collapse
First post on first page
Kostyan_nsk said:
Hi everyone.
Here's my build of TWRP 3.0.0-0 for Huawei P7.
Features:
Supports USB OTG, so you can use USB flash drive as external storage for backups, zip installations.
Added feature to make backup/restore of internal storage.
Added feature to make backup/restore of oeminfo partition. This partition contains info about vendor and current installed version. So in case if you want to rollback to 4.4.2, for example, or revert back your previous vendor version, you can just restore oeminfo from backup with 4.4.2 version or other vendor and flash appropriate firmware without flashing transition package, vendor and without getting "cust fail" error.
Combined with stock EMUI 3.1 recovery. In case of power-on by holding power + vol+ or rebooting into recovery by command or any 3rd party application: will boot in TWRP. In case of local update, OTA-update, factory reset from menu or "force update" (3buttons method): will boot into EMUI recovery. Thus you don't have to flash stock recovery before OTA-update, flashing official firmware or doing factory rest.
Off-mode charger updated from EMUI 3.1 (for 4.4.2)
custom.bin and cust symlinks are saved/restored (if they were exist) in case of Wipe/Format Data. So there is not gonna be "cust" issues after factory reset in TWRP.
Excluded SuperSU from build.
Enabled encrypted data support.
Screen lock by power button replaced with screen off.
Requirements:
Unlocked bootloader
Android 4.4.2 - 5.1.1
Installation:
Reboot in fastboot mode
Flash image via fastboot
Code:
fastboot flash recovery TWRP_P7-3.0.0-0.img
fastboot reboot
From TWRP: Press "Install" and select zip-archive
Known issues:
Because internal storage is not a separate block device and just a subfolder of "userdata" partition, before you can make backup/restore of internal storage, first you should do Mount -> Data. Otherwise you will get error, saying that TWRP can't mount "storage". So don't bother if you'll see this error.
Download: TWRP_P7-3.0.0-0.img
For TWRP: TWRP_P7-3.0.0-0.zip
Click to expand...
Click to collapse
Download ADB/FASTBOOT
Download TWRP_P7-3.0.0-0.img
And put it into the ADB / FASTBOOT folder
Install drivers of your phone
Connect your phone to your computer
Enable USB debugging on your phone
Open ADB and type:
"adb devices" (you should see now your device)
"adb reboot bootloader"
Now you should see at the bottom unlocked or locked. That means if your bootloader is unlocked. You need to unlock your bootloader to install a custom recovery.
If you see unlocked...
"fastboot flash recovery TWRP_P7-3.0.0-0.img"
That's it
Reboot your phone.
RangerP7 said:
First post on first page
Download ADB/FASTBOOT
Download TWRP_P7-3.0.0-0.img
And put it into the ADB / FASTBOOT folder
Install drivers of your phone
Connect your phone to your computer
Enable USB debugging on your phone
Open ADB and type:
"adb devices" (you should see now your device)
"adb reboot bootloader"
Now you should see at the bottom unlocked or locked. That means if your bootloader is unlocked. You need to unlock your bootloader to install a custom recovery.
If you see unlocked...
"fastboot flash recovery TWRP_P7-3.0.0-0.img"
That's it
Reboot your phone.
Click to expand...
Click to collapse
There are some nots ==
Where is ADB or link ADB/Fastboot
Where is folder Fastboot
albelushi7 said:
There are some nots ==
Where is ADB or link ADB/Fastboot
Where is folder Fastboot
Click to expand...
Click to collapse
Use the power of Google, maybe the force will be with you and you will find it
And please! inform you about flashing things on your phone. First learn how it work (your phone, bootloader, recovery, system, adb/fastboot) and after that start work...
If you are just flashing random **** on your phone without knowing what your are doing I will promise you, in less then one week you will ask for help because your phone won't start anymore...
RangerP7 said:
Use the power of Google, maybe the force will be with you and you will find it
And please! inform you about flashing things on your phone. First learn how it work (your phone, bootloader, recovery, system, adb/fastboot) and after that start work...
If you are just flashing random **** on your phone without knowing what your are doing I will promise you, in less then one week you will ask for help because your phone won't start anymore...
Click to expand...
Click to collapse
I know that
But This new for me ?
I want install this twerb ,because I think phone be better..
Just Try ?
Think you ?
Hello.
I'm having issues TWRP backups. Maybe I was undone system. I need a friend using the honor 7 PLK-L01 system backup of your phone by then compressed .zip TWRP.roi nk.len up for me to use. My machine is now no longer on the operating system.
*Help me.
thank you
There are many ways to bring your phone to life. But I can suggest this;
- Extract boot(if necessary) and recovery .imgs from a full rom(which one you want) via http://forum.xda-developers.com/showthread.php?t=2433454
- Flash them by adb commands
- Put the update.app file in your sd card and start the update by 3 button way
Another suggestion is more simple; use Multi-Tool to flash the stock recovery and that's it.
memht said:
There are many ways to bring your phone to life. But I can suggest this;
- Extract boot(if necessary) and recovery .imgs from a full rom(which one you want) via http://forum.xda-developers.com/showthread.php?t=2433454
- Flash them by adb commands
- Put the update.app file in your sd card and start the update by 3 button way
Another suggestion is more simple; use Multi-Tool to flash the stock recovery and that's it.
Click to expand...
Click to collapse
Thank.
multi tool can use the phone while I was hanging not. and restore them in any way.
memht said:
There are many ways to bring your phone to life. But I can suggest this;
- Extract boot(if necessary) and recovery .imgs from a full rom(which one you want) via http://forum.xda-developers.com/showthread.php?t=2433454
- Flash them by adb commands
- Put the update.app file in your sd card and start the update by 3 button way
Another suggestion is more simple; use Multi-Tool to flash the stock recovery and that's it.
Click to expand...
Click to collapse
after restore I saw this line
"MD5 failed to match on ... / ... twrp / backups /............./.........../ system.ext4.win001"
do not know why?
hotboymen2026 said:
after restore I saw this line
"MD5 failed to match on ... / ... twrp / backups /............./.........../ system.ext4.win001"
do not know why?
Click to expand...
Click to collapse
I don't know actually but md5 errors are usually harmless. But if your recovery is working, just do fresh installation.
memht said:
I don't know actually but md5 errors are usually harmless. But if your recovery is working, just do fresh installation.
Click to expand...
Click to collapse
Do not really undersand. I've manually restore your backup files, but only running to 99%. and restore fail.
Errors are displayed MD5 "system.ext4.win001"
hotboymen2026 said:
Do not really undersand. I've manually restore your backup files, but only running to 99%. and restore fail.
Errors are displayed MD5 "system.ext4.win001"
Click to expand...
Click to collapse
Actually I am really confused.. What is your phone's condition right now? And what do you want to do?
memht said:
Actually I am really confused.. What is your phone's condition right now? And what do you want to do?
Click to expand...
Click to collapse
Status phone rom I'm wrong. logo only lead to hang on is TWRP, connect PC and Fastboot. but when I rom stock (PLK-L01 C432B270) is successful but unable to reboot the operating system. H7 is due to the security, it's hard to be rescued. I also put it into the service center (not the local machine), they also confused with my H7. I need to find ways to revive it, no matter how well!
hi,
I bought a new Huawei P10 lite phone, unlocked the bootloader, installed TWRP and with this I installed SuperSU via microSD card.
Everything worked fine, until now. Now I want to backup my current modified stock ROM, but TWRP failes.
I got the problem very fast: TWRP can read all files and folders on the microSD car, but not in the internal storage folder.
The file structure is like the following:
acct
boot
cache
config
data
...
etc
external_sd <-- the microSD card
mnt
...
sbin
sdcard
storage
...
Click to expand...
Click to collapse
Everything can be read by TWRP, except the sdcard folder.
Here he only shows strange names (crypted I guess):
something like:
2h8P9lGY8I1A884LMsBjaA
2u+nb0LdBNopRSa5LehsvB
75aTrCvYkWG+R+lrcRz6WA
DcwYkwSKokq8Rm5lYc4YYC
...
Click to expand...
Click to collapse
This strange folders occure within TWRP itself and also if I mount the storage to the computer via TWRP.
I also can not modify, delete or add anything in this cryted folder.
So what am I doing wrong? Why is this crypted and can not be read?
During my research I found this post on reddit with the same problem. But the solution is not clear to me and also not working.
Thanks for any help
greetings
Christopher
PS.: Here some specific information about the phone:
brand new Huawei P10 lite
model WAS-LX1A
build nr. WAS-LX1AC432B102
no updates avaible, checked twice
EMUI 5.1 with Android 7.0
TWRP v3.1.0-2 from here (named "TWRP_P10_Lite_Beta.img")
Hey
It's because your files are encrypted due to forceecnryption and dm-varity in the kernel you can try formating the data to see if it removes the encryption from the data.
My infos may not be correct you can read more about dm-varity and forceecnryption in the internet
aburezk said:
Hey
It's because your files are encrypted due to forceecnryption and dm-varity in the kernel you can try formating the data to see if it removes the encryption from the data.
My infos may not be correct you can read more about dm-varity and forceecnryption in the internet
Click to expand...
Click to collapse
Ok, thanks a lot. This was helful so far.
From what I read, I now must flash a new "boot.img" in order to disable force encryption. But where do I get such a file for my Huawei P10 lite (WAS-LX1A)? I did not found one. Maybe the phone is too new? Or am I just blind?
greetings
christopher2007 said:
Ok, thanks a lot. This was helful so far.
From what I read, I now must flash a new "boot.img" in order to disable force encryption. But where do I get such a file for my Huawei P10 lite (WAS-LX1A)? I did not found one. Maybe the phone is too new? Or am I just blind?
greetings
Click to expand...
Click to collapse
you can't find it anywhere
aburezk said:
you can't find it anywhere
Click to expand...
Click to collapse
Ok, so too new ... damn. That is very bad.
christopher2007 said:
Ok, so too new ... damn. That is very bad.
Click to expand...
Click to collapse
I managed to disable force encryption on my device
Download this and flash it
Backup your data and wipe data from twrp
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
I tryed no-verity-opt-encrypt-6.0.zip but now do not start anymore... I have restore boot and system but none... what can I do? I think i will sell this p10 lite...
simona70 said:
I tryed no-verity-opt-encrypt-6.0.zip but now do not start anymore... I have restore boot and system but none... what can I do? I think i will sell this p10 lite...
Click to expand...
Click to collapse
i had the same issue by using no-verity-opt-encrypt-6.0.zip. The phone was brick after that.
Do you know your Build of your Phone ? If yes you can download the right Update.app from Huawei and extract the BOOT.IMG, RECOVERY.IMG and the SYSTEM.IMG (Maybe CUST.IMG) and restore it in the fastboot Mode. After that it started again to the UI.
If you dont know the Build of your Phone there will be some Fastboot oem commands to get it (i dont have them in my mind right now).
I flashed the ZIPs in TWRP after that with an external SD card witch arent crypted names...
ChipCollector said:
i had the same issue by using no-verity-opt-encrypt-6.0.zip. The phone was brick after that.
Do you know your Build of your Phone ? If yes you can download the right Update.app from Huawei and extract the BOOT.IMG, RECOVERY.IMG and the SYSTEM.IMG (Maybe CUST.IMG) and restore it in the fastboot Mode. After that it started again to the UI.
If you dont know the Build of your Phone there will be some Fastboot oem commands to get it (i dont have them in my mind right now).
I flashed the ZIPs in TWRP after that with an external SD card witch arent crypted names...
Click to expand...
Click to collapse
I solved using "update_data_full_public.zip" and clearing /data, after restoring previuos boot.img and system.img .
My phone was WAS-LX1AC432B102 4gb EMUI5.1 Android 7.0. I had bricked before and the only way to unbrick was to use "Warsaw-L21_C432B182_EU_SERVICE_androidhost.ru"
I do not trust to install data into a phone i can't backup and restore with TWRP... there is another way to make /data not crypted?
Exist the hope one day TWRP read also crypted /data or it is better search another phone?
ChipCollector said:
i had the same issue by using no-verity-opt-encrypt-6.0.zip. The phone was brick after that.
Do you know your Build of your Phone ? If yes you can download the right Update.app from Huawei and extract the BOOT.IMG, RECOVERY.IMG and the SYSTEM.IMG (Maybe CUST.IMG) and restore it in the fastboot Mode. After that it started again to the UI.
If you dont know the Build of your Phone there will be some Fastboot oem commands to get it (i dont have them in my mind right now).
I flashed the ZIPs in TWRP after that with an external SD card witch arent crypted names...
Click to expand...
Click to collapse
Hey, I am having the exact same problem, my phone is soft bricked after no-verity-opt-encrypt-6.0.zip. (https://forum.xda-developers.com/p10/help/stuck-device-booting-flashing-rom-t3713503).
I know the build of my phone, and I downloaded the update.app and extracted it to boot.img, recovery.img, system.img, but how exactly can I restore it in the fastboot mode. What commands?
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
---------- Post added at 04:35 PM ---------- Previous post was at 04:32 PM ----------
Anymore I think P10lite is a lost cause. I sell to my mother. I bought a xiaomi redmi note 4 global. Never again a Huawei. What a disappointment.
You'll sale your phone to your? Mother? To your mother?
Anyway the same story is on redmi note and all xiaomi
Phones
All the Chinese are difficult to modify.
I was have all Nexus thru 2011 very easy phones but the Chinese... My...
I have a doubt, I have bundled it when trying to install root on my device and I ended up in bootloop what I did was install a (official) rom which when entering the internal files, the folders were with strange names appear, so you recommend removing the credentials (decrypt), to be able to install root? My Device is Xiaomi mi A2
Bro did you find a solution..I am having same problem help
Had my phone bricked two days ago after a failed Motorola system update. Decided do ditch it and go with LineageOS, wich I got working after a few failed install attempts. When I tried to acess my internal storage, I had only those randomly named folders. Deleted them all, but couldn´t write to my storage after. Even tried a camera app, and it said that couldn´t work without a sdcard.
SOLUTION: boot recovery on TWRP > Wipe > Advanced Wipe> select ONLY internal storage > swipe to wipe :good:
Rebooted after internal storage wipe and everything is fine now. It seems all the install attempts made some sort of mess.
chimeralounge said:
Had my phone bricked two days ago after a failed Motorola system update. Decided do ditch it and go with LineageOS, wich I got working after a few failed install attempts. When I tried to acess my internal storage, I had only those randomly named folders. Deleted them all, but couldn´t write to my storage after. Even tried a camera app, and it said that couldn´t work without a sdcard.
SOLUTION: boot recovery on TWRP > Wipe > Advanced Wipe> select ONLY internal storage > swipe to wipe :good:
Rebooted after internal storage wipe and everything is fine now. It seems all the install attempts made some sort of mess.
Click to expand...
Click to collapse
Legend. This fixed the same issue we were facing on the t510 Samsung tablet. Saved us a lot of trouble. Thanks for this.
memz180 said:
Legend. This fixed the same issue we were facing on the t510 Samsung tablet. Saved us a lot of trouble. Thanks for this.
Click to expand...
Click to collapse
-----------
Cool, glad to help! In fact, this issue happened to me once again a few weeks back, when LegacyOS updated. I had this "f*** here we go again" moment, but before wiping, I decided to use TWRP > Advanced > Fix Content. Not only I got the system working again, but *all my data was intact*. System updates are messing file tables, apparently.
I want to marry TWRP.
chimeralounge said:
Had my phone bricked two days ago after a failed Motorola system update. Decided do ditch it and go with LineageOS, wich I got working after a few failed install attempts. When I tried to acess my internal storage, I had only those randomly named folders. Deleted them all, but couldn´t write to my storage after. Even tried a camera app, and it said that couldn´t work without a sdcard.
SOLUTION: boot recovery on TWRP > Wipe > Advanced Wipe> select ONLY internal storage > swipe to wipe :good:
Rebooted after internal storage wipe and everything is fine now. It seems all the install attempts made some sort of mess.
Click to expand...
Click to collapse
God bless you! i've struggle with this s]+t for hours!
what worked for me is installing siankatabg-twrp , now i can see names fine
after that i changed back to official version (which was missy before) and still fine !!!!!!!!
then installed orange fox (which was missy before) and still fine !!!!!!!!
WTH !!!!!!!!!!!!
so i think best shot (if u dont have siankatabg-twrp) is installing codeworkx (Lineage recovery) make sure all good then go back to ur favorite.
lemme know if its works
Hello J3 Pop users. I have here a "backup" of the PL1 firmware made using TWRP. This flash procedure may be necessary if one can not flash the Odin ROM because of any number of failures (there seems to be a common problem with this). I am not positive if this is stock, or pre-rooted.
If you're looking for an Odin file, check here https://forum.xda-developers.com/general/general/rom-pl1-samsung-galaxy-j3-emerge-sm-t3580396
First off, DISCLAIMER: This is not a factory approved flash method, and if you haven't done so already, may void your warranty, or brick your device. Use at your own risk.
Now, with that out of the way, you will need to install TWRP, if you haven't already. That can be obtained from this link:
https://forum.xda-developers.com/ga...overy-twrp-3-1-0-1-samsung-galaxy-j3-t3573607
Just follow the flash instructions, but you don't need to attempt to root it... that part might fail in this case anyways.
Download the file from this link. you will need to extract the folder inside to ".\TWRP\BACKUPS\{device serial}" on your SD card. If you don't see this folder, just create any kind of backup from inside TWRP, even just the "EFS" partition will create the folder you need.
With the files and SD card in place, select "restore" inside TWRP. Select the partitions to restore, and there are two partitions labeled with system, i would recommend restoring both. The "EFS" and "EFS2" partitions should never be restored unless you know beyond a shadow of a doubt that those partitions are corrupted (it rarely happens, even when a device is bricked).
https://drive.google.com/open?id=0BxL3I-2U6frBOFRaSG1UYXd3WWc
So is this flashable via TWRP recovery, or Odin?
Schmitin said:
So is this flashable via TWRP recovery, or Odin?
Click to expand...
Click to collapse
clearly it is flashable via twrp (the last link)
thepcwiz101 said:
clearly it is flashable via twrp (the last link)
Click to expand...
Click to collapse
so on TWRP when I go to flash the recovery nothing shows. is there anyway to fix that?
EDIT: I fixed it. I put it in the wrong folder.
Hey! I really need this file! please send me if you have a backup, I would really appreciate it!
@Greaper88 Please give me access
I made an ADB backup via TWRP of each partition (boot, system, data, cache) individually direct to my PC prior to flashing a new ROM. After flashing the new ROM, I realized I forgot to backup texts and wifi netwroks via Titanium Backup. I tried to restore each partition so I could go back and copy the texts and wifi networks but it didn't work. TWRP reported no OS installed and it didn't boot either. I did update the bootloader after I created the backup and am not sure if that's why it's failing.
Is there a way to extract the texts and wifi networks from the backed up file(s)? Do I need to flash a previous bootloader to get the backup to work?
Thanks
pongolo said:
I made an ADB backup via TWRP of each partition (boot, system, data, cache) individually direct to my PC prior to flashing a new ROM. After flashing the new ROM, I realized I forgot to backup texts and wifi netwroks via Titanium Backup. I tried to restore each partition so I could go back and copy the texts and wifi networks but it didn't work. TWRP reported no OS installed and it didn't boot either. I did update the bootloader after I created the backup and am not sure if that's why it's failing.
Is there a way to extract the texts and wifi networks from the backed up file(s)? Do I need to flash a previous bootloader to get the backup to work?
Thanks
Click to expand...
Click to collapse
I would say no but I'm drunk at the moment:laugh:. WiFi and text should be a part of data part of the backup. I see that you backup data so it should be there but I don't think you can do it the way you tried. Let's see what smarter people have to say.
pongolo said:
I made an ADB backup via TWRP of each partition (boot, system, data, cache) individually direct to my PC prior to flashing a new ROM. After flashing the new ROM, I realized I forgot to backup texts and wifi netwroks via Titanium Backup. I tried to restore each partition so I could go back and copy the texts and wifi networks but it didn't work. TWRP reported no OS installed and it didn't boot either. I did update the bootloader after I created the backup and am not sure if that's why it's failing.
Is there a way to extract the texts and wifi networks from the backed up file(s)? Do I need to flash a previous bootloader to get the backup to work?
Thanks
Click to expand...
Click to collapse
Nope, I've never heard of a way to extract anything from a TWRP backup file without restoring it. I've never had to flash a different bootloader to get a TWRP restore to work, even after the bootloader was upgraded by the new ROM I installed. I assume that the bootloader is restored when restoring the TWRP backup. How did you restore the backup? Did you restore the entire backup (all of the partitions) at the same time or try to do them one at a time? I've only had luck with restoring the entire backup at the same time.
alryder said:
Nope, I've never heard of a way to extract anything from a TWRP backup file without restoring it. I've never had to flash a different bootloader to get a TWRP restore to work, even after the bootloader was upgraded by the new ROM I installed. I assume that the bootloader is restored when restoring the TWRP backup. How did you restore the backup? Did you restore the entire backup (all of the partitions) at the same time or try to do them one at a time? I've only had luck with restoring the entire backup at the same time.
Click to expand...
Click to collapse
The first backup I made which had all the partitions in one file didn't seem to work properly as it did not copy the file locally to the PC. I tried it again but created a separate file for each partition which seemed to work so I have 4 files in total. I restored the files in this order: boot, system, data, cache. When it finished I got a message when exiting TWRP that there was no OS installed. I rebooted anyway and it failed.
Is there any way of restoring it to an emulator running on the PC?
pongolo said:
The first backup I made which had all the partitions in one file didn't seem to work properly as it did not copy the file locally to the PC. I tried it again but created a separate file for each partition which seemed to work so I have 4 files in total. I restored the files in this order: boot, system, data, cache. When it finished I got a message when exiting TWRP that there was no OS installed. I rebooted anyway and it failed.
Is there any way of restoring it to an emulator running on the PC?
Click to expand...
Click to collapse
It's likely too late for this now but I've backed up to and restored from a single file on my PC by following this guide quite a few times in the past without any issue. My thoughts are if the files won't restore to your phone they probably won't restore to an emulator either but I honestly have no experience with emulators.
Hi, I recently made an adb backup through twrp and now want to open the file with droid explorer. It asks for a password, when entering the one I had on the phone it doesn't open, I even tried restoring it through twrp -> didn't work, with booted phone it asked too for a password -> also didn't work. Do you guys know if twrp has a password which it sets automatically?
alryder said:
It's likely too late for this now but I've backed up to and restored from a single file on my PC by following this guide quite a few times in the past without any issue. My thoughts are if the files won't restore to your phone they probably won't restore to an emulator either but I honestly have no experience with emulators.
Click to expand...
Click to collapse
In the recovery terminal with the restored backup, delete "/data/system/locksettings.db". That should allow you to boot to system without a password. There is a benefit to removing PIN/pattern locks before making backups.