Database Develop

Moto X TMO Dev Edition Freezing

Hi,
I just got my Moto X Dev Edition GSM TMO last week, but I got it very unstable, while I had try to wipe cache and factory reset few times.
Some problem that I have
Numeric Keypad is not shown while using google keyboard. The problem that my email is using 2FA from google to entry my 6-digit PIN
Chrome freeze while open quite complex pages
Gmail freezing while open communication more than 3 email on the messaging mode
Path also unstable while need to scroll down and request to reload more data.
Whatsapp stuck when there's few message has beeen received
Thinking to downgrade the os to 4.4, but when I read in some thread inform better not to downgrade that might cause device brick.
Is there any other solution so I can use my Moto X for daily, while waiting for T-Mobile latest 4.4.2 rom.
Please share
Thank you

If you have to downgrade to 4.4, but you're waiting for T-Mobile 4.4.2, what ROM are you running?
MotoX Developer Edition went from German 4.4.2 to Great Britain 4.4.2 to T-Mobile 4.4.2 no problem. Fastboot FTW!

SymbioticGenius said:
If you have to downgrade to 4.4, but you're waiting for T-Mobile 4.4.2, what ROM are you running?
MotoX Developer Edition went from German 4.4.2 to Great Britain 4.4.2 to T-Mobile 4.4.2 no problem. Fastboot FTW!
Click to expand...
Click to collapse
Currently I'm using T-Mobile 4.4.2 OTA
Is it possible to restore to factory image with T-Mobile 4. 4?

tyapeter said:
Currently I'm using T-Mobile 4.4.2 OTA
Is it possible to restore to factory image with T-Mobile 4. 4?
Click to expand...
Click to collapse
Yes. But don't flash motoboot.img or gpt.img, it won't let you downgrade those. This doesn't means that you won't brick with other version.

eksasol said:
Yes. But don't flash motoboot.img or gpt.img, it won't let you downgrade those. This doesn't means that you won't brick with other version.
Click to expand...
Click to collapse
Eksasol,
What did you mean with don't flash with those files? Is that means unzip the image files and take out those files and zip again?
Which images is the best one for downgrade, from the sbf Blur_Version.161.44.25.ghost_row.Retail.en.US.zip or TMO_RETAIL_XT1053_4.4-13.11.1Q2.X-69-3_MR2_1FF.xml.zip
And also what you mean with "This doesn't means that you won't brick with other version"? Is that mean that not guarantee that downgrade won't have brick on the devices?
Please advice thanks

Let me make it easier. Just flash the system and kernel files leave everything else alone. However the ability to go back depends on how you got to 4.4.2 to begin with, OP said he took the OTA, not sure about you.
My advice assuming you're stock is to call Motorola, tell them you took the ota and these are the issues you're having. Get them to send you a new phone. I'd rather see you do that than brick your phone trying to do it yourself.
MotoX Developer Edition went from German 4.4.2 to Great Britain 4.4.2 to T-Mobile 4.4.2 no problem. Fastboot FTW!

eksasol said:
Yes. But don't flash motoboot.img or gpt.img, it won't let you downgrade those. This doesn't means that you won't brick with other version.
Click to expand...
Click to collapse
Are you sure this is correct? I was told in this thread: http://forum.xda-developers.com/showthread.php?p=50330230#post50330230 (see post #12):
let me make this blunt before you even get your phone
your phone is a DE so you can root any version
is you come with 4.2.2 camera update or 4.4 you can upgrade and downgrade between thouse two versions only
if your phone comes with 4.4.2 you can not downgrade at all so just root it and enjoy because most people are trying to get there and bricking there phones half the time.
Click to expand...
Click to collapse
So the way I understand it one cannot downgrade from 4.4.2 to any other version because bootloader in 4.4.2 was changed and is not compatible with any previous release.

tyapeter said:
Eksasol,
What did you mean with don't flash with those files? Is that means unzip the image files and take out those files and zip again?
Which images is the best one for downgrade, from the sbf Blur_Version.161.44.25.ghost_row.Retail.en.US.zip or TMO_RETAIL_XT1053_4.4-13.11.1Q2.X-69-3_MR2_1FF.xml.zip
And also what you mean with "This doesn't means that you won't brick with other version"? Is that mean that not guarantee that downgrade won't have brick on the devices?
Please advice thanks
Click to expand...
Click to collapse
If you haven't already unlock the bootloader, then you should just send the phone back. Once you unlock the bootloader the warranty is voided and you'll be stuck with that phone. If you still intend on flashing:
You flash them using mfastboot while in flash mode, do not flash motoboot or gpt, also don't run "fastboot getvar". Manually perform these commands:
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase customize
mfastboot erase clogo
After flashing T-Mo 4.4, you can receive OTA update to get back to 4.4.2.
As for downgrading to other versions, read this sticky before flashing anything: http://forum.xda-developers.com/showthread.php?t=2635366

eksasol said:
If you haven't already unlock the bootloader, then you should just send the phone back. Once you unlock the bootloader the warranty is voided and you'll be stuck with that phone. If you still intend on flashing:
You flash them using mfastboot while in flash mode, do not flash motoboot or gpt, also don't run "fastboot getvar". Manually perform these commands:
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase customize
mfastboot erase clogo
After flashing T-Mo 4.4, you can receive OTA update to get back to 4.4.2.
As for downgrading to other versions, read this sticky before flashing anything: http://forum.xda-developers.com/showthread.php?t=2635366
Click to expand...
Click to collapse
Thanks a lot, it works

[Q] When is Lollipop going to be pushed?

So I just bought my Moto G 2014 (unlocked) and I have it all activated and set up. I was wondering though when Lollipop will be pushed so I can update to it? All I see articles are saying "It will get it" and "you should be able to update to it now" but I can't and I really don't want to void my warranty a day after I bought the phone. I want to try vanilla* Lollipop. Does anybody know when exactly?
( * = without having to manually install it via unlocking bootloader and using fastboot)

Motorola knows.

If it is the XT1063/4 ones, you can already install it via OTA.
Sent from my XT1064 using XDA Free mobile app

I have an Xt1064 and I still havent received the update. Is the update available here the same as the OTA? Im tempted to just install that one.
PerrottiX said:
If it is the XT1063/4 ones, you can already install it via OTA.
Sent from my XT1064 using XDA Free mobile app
Click to expand...
Click to collapse

I have XT1063 and I still didn't get the update through OTA as well. Is this normal?

i was trying
Hello, im from Perú. I got an XT1063 so when i am flashing i got two problems
1. hab check failed for boot
2. hab check failed for recovery
so anyone can help me?
I tried with Fastboot and with mfastboot, but same result.
I found this updates in other web which you can update to lollipop. Can anybody try them? I want to try but i can open the recovery...
getmovil dot com / motorola / root-moto-g-2014-android-lollipop /comment-page-1 /#comment-83348

Download the proper ota zip for your version from xda. Reboot into your stock bootloader. Apply update from sdcard. Done. No need to root or use fastboot. This can only be done on a completely stock phone with a locked bootloader. Its the same as end result that you'd get if you wait for the ota to arrive normally. Do not do this if you have unlocked your bootloader at any time. And make sure you use the proper ota zip for your model, there are three different models, the single sim us model ends in 1064.

Lokke9191 said:
Download the proper ota zip for your version from xda. Reboot into your stock bootloader. Apply update from sdcard. Done. No need to root or use fastboot. This can only be done on a completely stock phone with a locked bootloader. Its the same as end result that you'd get if you wait for the ota to arrive normally. Do not do this if you have unlocked your bootloader at any time. And make sure you use the proper ota zip for your model, there are three different models, the single sim us model ends in 1064.
Click to expand...
Click to collapse
...from where can i download the proper ota zip????
mine is MOTO G2 (2nd GEN) XT1068 dual sim europe

You can't. Lollipop isn't released for the XT1068 yet. But be patient. I suspect it to be there in the first or the second quarter of 2015! (And with a little luck maybe even this year...).

i understood we will take directly :angel:Android 6.0 (M) Milky Bar.......:good:

htcgr said:
i understood we will take directly :angel:Android 6.0 (M) Milky Bar.......:good:
Click to expand...
Click to collapse
Honestly, it should be there anytime now. But people keep asking the question over and over again: when is it coming? This is annoying, because no one really knows!

Lokke9191 said:
Download the proper ota zip for your version from xda. Reboot into your stock bootloader. Apply update from sdcard. Done. No need to root or use fastboot. This can only be done on a completely stock phone with a locked bootloader. Its the same as end result that you'd get if you wait for the ota to arrive normally. Do not do this if you have unlocked your bootloader at any time. And make sure you use the proper ota zip for your model, there are three different models, the single sim us model ends in 1064.
Click to expand...
Click to collapse
any idea how to re-lock the bootloader? :good:

kevin_arthur said:
any idea how to re-lock the bootloader? :good:
Click to expand...
Click to collapse
Follow the guide at ( http://www.droidviews.com/restore-moto-g-2014-to-stock-and-lock-the-bootloader/ ). However there's a couple of things you have to do differently.
Your first command after you enter fastboot mode is gonna have to be "mfastboot.exe oem lock begin".
Theres also gonna be four system.img that you have to flash so after the command "mfastboot.exe flash system system.img_sparsechunk.2" you have to enter the command "mfastboot.exe flash system system.img_sparsechunk.3". Follow the rest of the guide, including the "mfastboot.exe oem lock" command at the end.
So basically the commands would be...
mfastboot.exe oem lock begin
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe oem lock
My phone automatically rebooted after that last command and my boot loader was locked even though it still displays the "Bootloader Unlocked" screen, I was able to flash the zip in the OP through the stock recovery after that.
COPIED AND PASTED FROM ANOTHER THREAD.
Courtesy of captivatingtab
---------- Post added at 11:29 AM ---------- Previous post was at 11:13 AM ----------
htcgr said:
...from where can i download the proper ota zip????
mine is MOTO G2 (2nd GEN) XT1068 dual sim europe
Click to expand...
Click to collapse
The xt1068 ota isnt available yet. There is a process to install another versions firmware on the xt1068 then upgrade to lollipop. But it looks buggy and super risky. I wouldn't recommend trying it. Id wait a little for the 1068 ota to be released. I know the other poster said it wont be available until 2015. But nobody knows for sure when itll be out. If i where to guess, id say itll be out fairly soon, sometime in the next 30 days. If I where you Id play it safe and wait it out.
---------- Post added at 11:32 AM ---------- Previous post was at 11:29 AM ----------
The only otas out so far are for the 1064 & 1063.

wish me luck!
Lokke9191 said:
Follow the guide at ( ). However there's a couple of things you have to do differently.
Your first command after you enter fastboot mode is gonna have to be "mfastboot.exe oem lock begin".
Theres also gonna be four system.img that you have to flash so after the command "mfastboot.exe flash system system.img_sparsechunk.2" you have to enter the command "mfastboot.exe flash system system.img_sparsechunk.3". Follow the rest of the guide, including the "mfastboot.exe oem lock" command at the end.
So basically the commands would be...
mfastboot.exe oem lock begin
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe oem lock
My phone automatically rebooted after that last command and my boot loader was locked even though it still displays the "Bootloader Unlocked" screen, I was able to flash the zip in the OP through the stock recovery after that.
COPIED AND PASTED FROM ANOTHER THREAD.
Courtesy of captivatingtab
Click to expand...
Click to collapse
okey, i will try.
thank you my friend!

smitharro said:
You can't. Lollipop isn't released for the XT1068 yet. But be patient. I suspect it to be there in the first or the second quarter of 2015! (And with a little luck maybe even this year...).
Click to expand...
Click to collapse
It'll be sooner than that. Within the next 6 weeks.
Sent from my XT1068 using XDA Free mobile app

Lokke9191 said:
Download the proper ota zip for your version from xda. Reboot into your stock bootloader. Apply update from sdcard. Done. No need to root or use fastboot. This can only be done on a completely stock phone with a locked bootloader. Its the same as end result that you'd get if you wait for the ota to arrive normally. Do not do this if you have unlocked your bootloader at any time. And make sure you use the proper ota zip for your model, there are three different models, the single sim us model ends in 1064.
Click to expand...
Click to collapse
i have the international unlocked xt1063. where can i get the zip?

Is there any official source on the release date?

Kobro said:
i have the international unlocked xt1063. where can i get the zip?
Click to expand...
Click to collapse
Its in the general section under a thread titled ota-index 1063-1064 update to lollipop.

I have a complete stock, nothing flashed or rooted or anything xt1064 and it says the zip needs a fingerprint when I try to install it from this thread...
http://forum.xda-developers.com/moto-g-2014/development/lollipop-moto-g-2014-xt1064-t2937361/page11

htcgr said:
i understood we will take directly :angel:Android 6.0 (M) Milky Bar.......:good:
Click to expand...
Click to collapse
its a Marshmallow 6.0

Wifi and 3g not working after manual ota

MOTO X 2014
I need help guys, it's urgent!!! So sometime ago (Dec 13 2014 ) i did this with adb to my phone to get it from android 4.4.4 to 5.0:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
Now i have been waiting for the ota of 5.1 since a lot of time but yesterday i got tired and installed the zip by going in recovery, i downloaded the 400MB zip from this forum link:
http://forum.xda-developers.com/moto-x-2014/general/ota-t3132045
But it didnt work it was saying something about a signature then i installed the 11MB zip which was a fix for users at 5.0 (me) found on the same forum link..
After installing that which installed successfully i installed the 400MB one and it completed, booted and now it's not detecting any sim and the wifi wont turn on, it keeps saying turning on wifi, please guys help i need my sim to work...thanks in advance, bye

First try clearing cache on the phone.
If that does not work, try wiping the phone.
If both of those fail, you probably will need to flash the full firmware.
Sent from my XT1095 using Tapatalk

AGISCI said:
First try clearing cache on the phone.
If that does not work, try wiping the phone.
If both of those fail, you probably will need to flash the full firmware.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
I will try and wipe the phone since i already tried clearing the cache...if i need to flash the full firmware, which firmware is it and do i need to root/unlock bootloader? i don't want to loose my warranty... what if i go to rma it like this? Is my warranty invalidated by what i did with adb? I mean will they find out?
Bye

splashzed said:
I will try and wipe the phone since i already tried clearing the cache...if i need to flash the full firmware, which firmware is it and do i need to root/unlock bootloader? i don't want to loose my warranty... what if i go to rma it like this? Is my warranty invalidated by what i did with adb? I mean will they find out?
Bye
Click to expand...
Click to collapse
I need to know what model and carrier you have to link the correct firmware.
As far as warranty goes. Warranty is only void if you unlock the bootloader. Except model xt1095, which does not lose warranty.
Sent from my XT1095 using Tapatalk

Firmware/Rom downgrade XT1072 -No sound-

Hi All!
Here is my situation, I have a moto g xt1072 (Jan 2016) which came with a faulty problem, no sound after 5 seconds of been started. I checked everything (Factory reset via recovery), including both speakers, (both working at 7.5 ohms). Do you think a firmware change or a different ROM can help or it's time to let it go?
Base band: M8926_309101.02.03.19R THEA_EMEA_CUST
Kernel: 3.4.42-gef77327 [email protected] #1
System Version: 24.41.34.thea_retes.retesall.en.EU retes
Complation numer: MPB24.65-34
Everything is stock, no changes were made.
Thanks in advance!!!
@lost101

did you look here
http://forum.xda-developers.com/moto-g-lte

sd_shadow said:
did you look here
http://forum.xda-developers.com/moto-g-lte
Click to expand...
Click to collapse
Yep, if you are familliar with this process could you mind writing me a list of steps in order? I'll investigate 1 by 1 later, I've found so much info that's confusing. My phone is unlcock for any cellphone company, but It's not root, it's stock.
I used to install custom ROM's on my old Defy + but I things are very different now for what I'm seening. :S

Fastboot flash the latest full factory firmware image for your model.
mfastboot download: https://www.androidfilehost.com/?fid=24052804347778493
XT1072 Retail Spain Android 6.0 Factory Firmware Image: https://www.androidfilehost.com/?fid=24533103863143791
Fastboot tutorial: http://forum.xda-developers.com/showthread.php?t=2542219 (See specific fastboot commands below)
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot​

murrayhawk said:
Yep, if you are familliar with this process could you mind writing me a list of steps in order? I'll investigate 1 by 1 later, I've found so much info that's confusing. My phone is unlcock for any cellphone company, but It's not root, it's stock.
I used to install custom ROM's on my old Defy + but I things are very different now for what I'm seening. :S
Click to expand...
Click to collapse
please dont mess up the flash.. because then you're pretty much ****ed.. as far ive seen and read and heard and tried, there will be no fix..

lost101 said:
Fastboot flash the latest full factory firmware image for your model.
mfastboot download: https://www.androidfilehost.com/?fid=24052804347778493
XT1072 Retail Spain Android 6.0 Factory Firmware Image: https://www.androidfilehost.com/?fid=24533103863143791
Fastboot tutorial: http://forum.xda-developers.com/showthread.php?t=2542219 (See specific fastboot commands below)
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot​
Click to expand...
Click to collapse
mfastboot download: Done
firmware download : Done
Fastboot: I'm not quite sure what is this about, is this for the new firmware installation? The guide you point says something about downgrading 4.3 to 4.2 and I'm running 6.0 stock.
I tried the first command (mfastboot flash partition gpt.bin) and it got stuck at : Waiting for device.
should I root the phone first?
can I use RSD Lite?

ora69 said:
please dont mess up the flash.. because then you're pretty much ****ed.. as far ive seen and read and heard and tried, there will be no fix..
Click to expand...
Click to collapse
I don't have anything to lose, this phone is rebooting itselft every 2 minutes.

murrayhawk said:
I don't have anything to lose, this phone is rebooting itselft every 2 minutes.
Click to expand...
Click to collapse
please, if anything gives a fail, post it on the thread! I myself have hard bricked this device, and now im trying to find the testpoint for it, ive already invested hours into this.. and i have no progress!, its worth it to post it on a thread

murrayhawk said:
mfastboot download: Done
firmware download : Done
Fastboot: I'm not quite sure what is this about, is this for the new firmware installation? The guide you point says something about downgrading 4.3 to 4.2 and I'm running 6.0 stock.
I tried the first command (mfastboot flash partition gpt.bin) and it got stuck at : Waiting for device.
should I root the phone first?
can I use RSD Lite?
Click to expand...
Click to collapse
The guide I linked to is not about downgrading. Ignore references to Android 4.3 - it still applies to Android 6.0. It sounds like you have not installed the usb drivers for your phone in Windows. This is a prerequisite. These Moto G drivers will also work for your phone:
Moto G USB Drivers (WinXP/7/8/10 32Bit-64Bit)​
Test Fastboot is working by typing: fastboot devices
You may also be able to use RSD Lite - but this again will require you have installed USB drivers for your phone.

murrayhawk said:
mfastboot download: Done
firmware download : Done
Fastboot: I'm not quite sure what is this about, is this for the new firmware installation? The guide you point says something about downgrading 4.3 to 4.2 and I'm running 6.0 stock.
I tried the first command (mfastboot flash partition gpt.bin) and it got stuck at : Waiting for device.
should I root the phone first?
can I use RSD Lite?
Click to expand...
Click to collapse
my opinion is use RSD lite first, unless there is not a specific firmware file for your carrier/region...
or there is a high rate of flashing failure with the firmware available.
if RSD lite fails, best to post errors from pc and phone here
before try again, if there's not an obvious fix
then try mfastboot.exe
fastboot.exe is generic android, mfastboot.exe is Motorola specific, for moto's unique system.img...
avoid usb 3.0 ports
make sure the firmware downloaded is correct size, verified MD5 is best.
verify drivers are correct when the device is in fastboot mode
I have generic moto instructions in my
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Sent from my KFFOWI using XDA Labs

sd_shadow said:
my opinion is use RSD lite first, unless there is not a specific firmware file for your carrier/region...
or there is a high rate of flashing failure with the firmware available.
if RSD lite fails, best to post errors from pc and phone here
before try again, if there's not an obvious fix
then try mfastboot.exe
fastboot.exe is generic android, mfastboot.exe is Motorola specific, for moto's unique system.img...
avoid usb 3.0 ports
make sure the firmware downloaded is correct size, verified MD5 is best.
verify drivers are correct when the device is in fastboot mode
I have generic moto instructions in my
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools
Sent from my KFFOWI using XDA Labs
Click to expand...
Click to collapse
i think the tip you gave to avoid usb 3.0 ports will really help, didnt realize i was using the usb 3.0 port

Ok, this is what I did so far: (I'm running Windows 7 64b).
1. RSD Lite 6.2.4: Installed
2. Motorola Mobile Drivers Installation 6.4.0: Installed
3. Motorola Device Manager: Installed
1. I started the mobile into the recovery mode
2. Connected the moto cable to the pc
3. Opened RSD Lite, loaded the new firmware and hit start boton
4. The process reached a "please reboot manually...."
5. The phone starts but with the old firmware in it.

More Updates: I ran mfastboot sequence and every command returned OKAY. The issue still remains intact, sound works for 5 seconds, and the firmware has not been updated.
Any thoughts?

murrayhawk said:
More Updates: I ran mfastboot sequence and every command returned OKAY. The issue still remains intact, sound works for 5 seconds, and the firmware has not been updated.
Any thoughts?
Click to expand...
Click to collapse
I want to see a full and complete log of the fastboot flashing process. Copy and paste command prompt screen. Take screenshots if necessary.

lost101 said:
I want to see a full and complete log of the fastboot flashing process. Copy and paste command prompt screen. Take screenshots if necessary.
Click to expand...
Click to collapse
Ok, please check the attachment.

It looks increasingly like your issue is hardware, not software related. The only remaining software option I can suggest is via PC, do the following wipe: (requires working ADB setup - google it)
http://forum.xda-developers.com/showpost.php?p=65431978&postcount=22​

lost101 said:
It looks increasingly like your issue is hardware, not software related. The only remaining software option I can suggest is via PC, do the following wipe: (requires working ADB setup - google it)
http://forum.xda-developers.com/showpost.php?p=65431978&postcount=22​
Click to expand...
Click to collapse
Can you explain why does it retain the original firmware after mfastboot commandas ran well?

Just a quick reminder. This moto g XT1702 Jan2016, is not rooted, bootloader is locked and has everything stock, it came with Android 6.0 installed.

murrayhawk said:
Can you explain why does it retain the original firmware after mfastboot command as ran well?
Click to expand...
Click to collapse
How do you mean original Firmware? You are flashing a Stock Android 6.0 firmware image.

lost101 said:
How do you mean original Firmware? You are flashing a Stock Android 6.0 firmware image.
Click to expand...
Click to collapse
What I have right now is : System Version: 24.41.34.thea_retes.retesall.en.EU retes and after flashing to XT1072_THEA_RETES_6.0_MPB24.65-34_cid7_subsidy-DEFAULT_CFC.xml. I'm still having 24.41.34.thea_retes.retesall.en.EU retes.

I bricked my device after doing some stupid thing, what stock ROM do I get to fix it?

I had installed the latest January patch on my stock ROM Moto One Power XT1942, and after rooting and tinkering, I accidentally put my phone in a bootloop. I tried to get hold of a stock ROM image but I only found ROMs with November patch, and comments warning me to not downgrade. So what do I do? Can anyone provide me with a January updated stock ROM?

If your phone is defined in the device manager as COM port 9008, you can restore it according to this instruction.
https://forum.xda-developers.com/moto-z/how-to/guide-how-to-unbrick-moto-z-hardbricked-t3590133
The file 'blank-flash.bat' can be taken in the folder "mbm-ci", the cat will be in the unpacked firmware.
https://mirrors.lolinet.com/firmware/moto/chef/official/RETAIL/fastboot_chef_oem_user_9_PPT29.74-25_64be_release-keys-cid50_oem.tar.gz
After installing this file, the phone will be able to boot into fastboot.
After that, you can restore the phone by flashing the same downloaded firmware using the method described here.
https://web.telegram.org/#/[email protected]
[1:27:03 PM]
smyaknti.tar.gz
:
admin
Set your device in fastboot mode do the following and skip the
fastboot -w
step if you don't want to format everything :
fastboot oem fb_mode_set
fastboot -w
fastboot flash bootloader bootloader.img
fastboot flash partition gpt.bin
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
(If you have more or less sparsechunk files then continue or terminate beforehand accorfingly)
fastboot flash system_b system_other.img
fastboot flash vendor vendor.img
fastboot flash oem oem.img
fastboot oem fb_mode_clear
fastboot reboot
Just yesterday, I so restored my phone from a brick, obtained after installing an unofficial TWRP and firmware RR.
Good luck.

https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
This is the January Patch Stock ROM

NitrodiumSK said:
I had installed the latest January patch on my stock ROM Moto One Power XT1942, and after rooting and tinkering, I accidentally put my phone in a bootloop. I tried to get hold of a stock ROM image but I only found ROMs with November patch, and comments warning me to not downgrade. So what do I do? Can anyone provide me with a January updated stock ROM?
Click to expand...
Click to collapse
You did not "Brick" your device per se. Probably some improper file was flashed. If you have not wiped your phone, you can just simple try to fastboot flash the stock boot image. It may solve the issue. If not then do a clean flash to either the stock ROM or any custom ROM from this AFH link.
Note that the Custom ROMs are still in beta due to a VoLTE issue and thus are not released on XDA Dev DB yet. They are safe to flash though and are stable if you do not need VoLTE.
You can also ask for more help at the official telegram channel for the device.

smyaknti said:
You did not "Brick" your device per se. Probably some improper file was flashed. If you have not wiped your phone, you can just simple try to fastboot flash the stock boot image. It may solve the issue. If not then do a clean flash to either the stock ROM or any custom ROM from this AFH link.
Note that the Custom ROMs are still in beta due to a VoLTE issue and thus are not released on XDA Dev DB yet. They are safe to flash though and are stable if you do not need VoLTE.
You can also ask for more help at the official telegram channel for the device.
Click to expand...
Click to collapse
I thank you very much for your help. I was able to successfully flash the stock firmware from the link you provided. I only have a small question. The stock ROM zip, is it updated after every security patch OTA update?

NitrodiumSK said:
I thank you very much for your help. I was able to successfully flash the stock firmware from the link you provided. I only have a small question. The stock ROM zip, is it updated after every security patch OTA update?
Click to expand...
Click to collapse
Yes, the complete firmware file is different with every new build released. You can install OTA with the current fastboot flashed stock ROM but provided it has to be "FULLY STOCK". Else the update will fail.

smyaknti said:
Yes, the complete firmware file is different with every new build released. You can install OTA with the current fastboot flashed stock ROM but provided it has to be "FULLY STOCK". Else the update will fail.
Click to expand...
Click to collapse
Alright gotcha! Thanks a lot for your help

Hello dear Mates!
I purchased a cellphone yesterday Motorola Power One. its working fine, but I want to ask n know two things,
1. It has unlocked "bootloader" and on all restart it says to relock it to secure it. If I relock it, will still work or stop working?
2. It has Android 8.1.0 SKU XT1942-1 BUILD NUMBER OPT28.81-45 When I click update it shows Your Device is up-to-date
Android version 8.1.0
Current Version OPT28.81-45
Security Patch level September 1, 2018
But today I saw this update
XT1942-2_CHEF_RETAIL_9.0_PPTS29.74-29-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
I want to know can I update this version and how to?
Please help me as quickly as possible
Thanks and regards
azhar

No issue downgrade
You can downgrade one power there is no issue of you downgrade it don't worry
NitrodiumSK said:
I had installed the latest January patch on my stock ROM Moto One Power XT1942, and after rooting and tinkering, I accidentally put my phone in a bootloop. I tried to get hold of a stock ROM image but I only found ROMs with November patch, and comments warning me to not downgrade. So what do I do? Can anyone provide me with a January updated stock ROM?
Click to expand...
Click to collapse

Any how can anybody provide stock rom oem fastboot mode with March update???

azhar63 said:
Hello dear Mates!
I purchased a cellphone yesterday Motorola Power One. its working fine, but I want to ask n know two things,
1. It has unlocked "bootloader" and on all restart it says to relock it to secure it. If I relock it, will still work or stop working?
2. It has Android 8.1.0 SKU XT1942-1 BUILD NUMBER OPT28.81-45 When I click update it shows Your Device is up-to-date
Android version 8.1.0
Current Version OPT28.81-45
Security Patch level September 1, 2018
But today I saw this update
XT1942-2_CHEF_RETAIL_9.0_PPTS29.74-29-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
I want to know can I update this version and how to?
Please help me as quickly as possible
Thanks and regards
azhar
Click to expand...
Click to collapse
Yeah bro flash this room via fastboot commands

motorola one power
my moto one power starts freezing and when i restart its touch stop working....i flashed stock rom using twrp but still same problem and also try to flash rom using fastboot but still its system ui not responding and phone freezes and touch not working after reboot...please help please!!!:crying:

aum25 said:
Yeah bro flash this room via fastboot commands
Click to expand...
Click to collapse
Did you flash that rom in 1942- 1 ??? I have the same model num and running oreo... Want to update pie??? Were you successful in doing that ? Because that firmware file was for 1942-2 ? Plz share experience.

rudranshrajput said:
my moto one power starts freezing and when i restart its touch stop working....i flashed stock rom using twrp but still same problem and also try to flash rom using fastboot but still its system ui not responding and phone freezes and touch not working after reboot...please help please!!!:crying:
Click to expand...
Click to collapse
Did you install any third party app or it happens by itself? I had the same problem but i was messing around with the moto app launcher. Anyhow, try flashing this stock rom with latest june security patch. Don't use TWRP, it is a full rom. Use Fastboot mode. Also backup your device, if you want your files back. This will do a clean install of the rom.
Here is the link: https://drive.google.com/file/d/1lLmDvX4R4o2Jqrhp1RQflap27jxe4hXS/view
Steps:
1) Boot your device into fastboot mode
2) Open flashall.bat and wait for flashing
3) Reboot

colorist said:
If your phone is defined in the device manager as COM port 9008, you can restore it according to this instruction.
https://forum.xda-developers.com/moto-z/how-to/guide-how-to-unbrick-moto-z-hardbricked-t3590133
The file 'blank-flash.bat' can be taken in the folder "mbm-ci", the cat will be in the unpacked firmware.
https://mirrors.lolinet.com/firmware/moto/chef/official/RETAIL/fastboot_chef_oem_user_9_PPT29.74-25_64be_release-keys-cid50_oem.tar.gz
After installing this file, the phone will be able to boot into fastboot.
After that, you can restore the phone by flashing the same downloaded firmware using the method described here.
https://web.telegram.org/#/[email protected]
[1:27:03 PM]
smyaknti.tar.gz
:
admin
Set your device in fastboot mode do the following and skip the
fastboot -w
step if you don't want to format everything :
fastboot oem fb_mode_set
fastboot -w
fastboot flash bootloader bootloader.img
fastboot flash partition gpt.bin
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
(If you have more or less sparsechunk files then continue or terminate beforehand accorfingly)
fastboot flash system_b system_other.img
fastboot flash vendor vendor.img
fastboot flash oem oem.img
fastboot oem fb_mode_clear
fastboot reboot
Just yesterday, I so restored my phone from a brick, obtained after installing an unofficial TWRP and firmware RR.
Good luck.
Click to expand...
Click to collapse
thanks by you my device just boot up in fastboot mod
thank you very much
best regard

Need help with phone bricked.
I was installing the Arrows OS in Motorola one power and after rebooting, the set is in the bricked mode now it's not responding to anything. Can anyone please guide how can I fix it?

I got similar problem.when I'm flashing arrows or others custom ROMs(1custom ROM,2twrp installer)and restart my phone no restarting only bricked.help only blankflash

Phone bricked after installing arrow is on p30 note xt1942-1
I tried the blankflash method but not working, I'm getting I/O error
Any ideas?