Related
hi friends! I tried lineageos but can't live without reliable camera. Now trying to restore stock. but unsuccessful so far. My current status is,
1. I am able to boot to fastboot
2. I am able to boot to recovery. (twrp 3.2.1.0)
3. tried to flash OEM rom bellow (had to modify "updater-script", delete first two lines of code), after reboot, phone stuck on Leeco boot screen. This is the instructions I followed, https://youtu.be/v_aohNnvT_Q
S2_X522-NA-OP-IFXNAOP5802012141S-5.8.020S.zip
S2_X522-NA-OP-IFXNAOP5802102141S-5.8.021S.zip
Any helps are much appropriated. :good::good::good:
apparently, I didn't do anything wrong. tried to flash again and again, suddenly it booted back to stock.
What am I missing here, your description says x522, even the filenames you list and the video say x526...
leo221 said:
apparently, I didn't do anything wrong. tried to flash again and again, suddenly it booted back to stock.
Click to expand...
Click to collapse
Where are you from?
leo221 said:
hi friends! I tried lineageos but can't live without reliable camera. Now trying to restore stock. but unsuccessful so far. My current status is,
1. I am able to boot to fastboot
2. I am able to boot to recovery. (twrp 3.2.1.0)
3. tried to flash OEM rom bellow (had to modify "updater-script", delete first two lines of code), after reboot, phone stuck on Leeco boot screen. This is the instructions I followed,
S2_X522-NA-OP-IFXNAOP5802012141S-5.8.020S.zip
S2_X522-NA-OP-IFXNAOP5802102141S-5.8.021S.zip
Any helps are much appropriated. :good::good::good:
Click to expand...
Click to collapse
I am also having same problem on letv x526 indian version. After installing stock rom the phone stucks in bootloop. I tried using the chinese recovery also but no luck. I waited atmost 30 min for the phone to get out of boot loop.
Any solution. Pls help
amrit0 said:
I am also having same problem on letv x526 indian version. After installing stock rom the phone stucks in bootloop. I tried using the chinese recovery also but no luck. I waited atmost 30 min for the phone to get out of boot loop.
Any solution. Pls help
Click to expand...
Click to collapse
I flashed multiple times to make it work. you try the same. follow the exact wipe...restore sequence in the video.
leo221 said:
I flashed multiple times to make it work. you try the same. follow the exact wipe...restore sequence in the video.
Click to expand...
Click to collapse
Kk i will try that.
By the way which rom version have you flashed?
amrit0 said:
Kk i will try that.
By the way which rom version have you flashed?
Click to expand...
Click to collapse
S2_X522-NA-OP-IFXNAOP5802102141S-5.8.021S.zip
my phone is X522 US version.
leo221 said:
S2_X522-NA-OP-IFXNAOP5802102141S-5.8.021S.zip
my phone is X522 US version.
Click to expand...
Click to collapse
And which recovery were u using? Were you wiping cache immidiately after installing the rom?
Also should i wipe internal storage or not?
amrit0 said:
And which recovery were u using? Were you wiping cache immidiately after installing the rom?
Also should i wipe internal storage or not?
Click to expand...
Click to collapse
twrp 3210. I followed EXACT steps in the video and must be in that wiping sequence. if i don't, phone wouldn't boot.
leo221 said:
twrp 3210. I followed EXACT steps in the video and must be in that wiping sequence. if i don't, phone wouldn't boot.
Click to expand...
Click to collapse
I installed the rom 7-8 times but phone didnt booted. What should i do now?
Is this for rom mtk or not snapdragon?
When you flash stock rom via twrp successfully then before reboot flash andromax kernel for le2 after flash kernel then reboot system now this time your phone starts eui rom but remember first boot take some time maybe 2-5 minutes.
Use Red Wolf Recovery
For le S3 X522 US Version
--------------------------------
leo221 said:
hi friends! I tried lineageos but can't live without reliable camera. Now trying to restore stock. but unsuccessful so far. My current status is,
1. I am able to boot to fastboot
2. I am able to boot to recovery. (twrp 3.2.1.0)
3. tried to flash OEM rom bellow (had to modify "updater-script", delete first two lines of code), after reboot, phone stuck on Leeco boot screen. This is the instructions I followed, https://youtu.be/v_aohNnvT_Q
S2_X522-NA-OP-IFXNAOP5802012141S-5.8.020S.zip
S2_X522-NA-OP-IFXNAOP5802102141S-5.8.021S.zip
Any helps are much appropriated. :good::good::good:
Click to expand...
Click to collapse
Hi i also suffered from this problem very long time.
But phone stuck on Leeco boot screen
I accidentally found custom recovery "Red Wolf"
which supports EUI ROMs
which was mentioned in features as "Automatic EUi boot image patching"
Recovery X52X V3.1-017
You can download it from my Google drive also.
Steps to Install ( For le S3 X522 US Version)
----------------------------------------------
1. delete first two lines in update-script
2. Install red wolf recovery
3. This can be installed from fastboot
Or you can install it directly from
twrp. (if you dont know ask here / google)
4. Go to recovery > swipe to allow modifications
5. wipe all partitions (excluding boot)
6. plug your le S3 X522 to computer
7. Go to my computer and copy
S2_X522-NA-OP-IFXNAOP5802012141S-5.8.020S.zip
to internal storage
8. you can copy supersu also at same time
and root if you want
9. Steps from 9-11 only needed if you have ever
encountered no os installed after flashing and reboot
10. press power button long and restart system
your phone wont have any os this time so your phone
will go to boot screen and show leeco logo
11. wait 30 seconds and press volume up(+) button and power key
you will go to recovery
12. Now you have followed step 6 so you will have
S2_X522-NA-OP-IFXNAOP5802012141S-5.8.020S.zip
in internal storage(additionally supersu file if you copied)
13. install S2_X522-NA-OP-IFXNAOP5802012141S-5.8.020S.zip
and ( additionally you can install supersu).
wait until all install finishes.
14. reboot it eui should appear within 5 minutes
enjoy
Finally when you rebooting if wolf recovery said os not installed
system will stuck on boot screen so
concentrate on steps 9-11
I have tested installation more than 10 times around 4 times i received os not installed message.
Have my Mi 8 about a week, loving it BUT as the bootloader is unlocked I couldn't use Google Pay so I decided to install TWRP and get the Xiaomi.eu ROM.
I just installed TWRP and tried backing up the phone, but I got an error saying it Can not create the folder. I reinstalled TWRP, thinking maybe there was an issue with the first install but now it's stuck in a recovery boot loop. It loads to the MI screen with the unlocked icon but doesn't get to the powered by android, it goes straight into recovery.
The Rom is not on the device and I thought maybe could install it through the recovery but if I have the phone plugged into the laptop (Windows 10) and go into recovery, the touch screen on the phone doesn't work and the phone keeps rebooting itself.
I can also get into Fastboot and the device is detected by miFlash.
What should I do next, I don't trust my instincts. Any advice would be much appreciated. I'm currently downloading the Global Rom off Xiaomi (going to take a while on my 3mb broadband) and hoping I can flash that with miFlash tool, good or bad idea??
U can use otg usb and put the rom on it.
Boot to twrp and wipe data (the one that ask you to say yes? Than install the rom(choose one for recovery flashing not fastboot)
gm007 said:
U can use otg usb and put the rom on it.
Boot to twrp and wipe data (the one that ask you to say yes? Than install the rom(choose one for recovery flashing not fastboot)
Click to expand...
Click to collapse
Cheers for the reply! Unfortunately I don't have an adapter to put the rom on the phone. I'll order one now, always good to have for situations like this.
Any other way of getting the phone up and running sooner? If not, no problem, I'll just have to wait for the adapter.
cherbe.3 said:
Cheers for the reply! Unfortunately I don't have an adapter to put the rom on the phone. I'll order one now, always good to have for situations like this.
Any other way of getting the phone up and running sooner? If not, no problem, I'll just have to wait for the adapter.
Click to expand...
Click to collapse
Sure there must be a fastboot method but didn't tried it yet, i had this phone 3 days ago
Not sure if after formatting data and reboot to twrp you can copy the rom from pc to phone.
One more thing if you use fastboot method be sure not to relock the bootloader cause you may brick ur phone.
If you want to install xiaomi.eu rom dont just wipe data but you have to format data then type yes. Reboot to twrp again. And at twrp recopy the xiaomi.eu rom.
Sent from my MI 8 using Tapatalk
Flash last MIUI global dev. Flash twrp. Wipe only data. Transfer Rom to phone. Flash Xiaomi eu Rom. Done
ariekumbang said:
If you want to install xiaomi.eu rom dont just wipe data but you have to format data then type yes. Reboot to twrp again. And at twrp recopy the xiaomi.eu rom.
Sent from my MI 8 using Tapatalk
Click to expand...
Click to collapse
the only right answer, all other are more or less useless.
you need to wipe data, then format data (confirm with yes)
after that, hold power+up to reboot in twrp again
(or go to mainmenu and choose reboot to recovery),
connect your Mi8 with Usb cable to PC and copy the xiaomi.eu rom to your mi8
and then flash it.
gm007 said:
One more thing if you use fastboot method be sure not to relock the bootloader cause you may brick ur phone.
Click to expand...
Click to collapse
Oh yes, thank you for the reminder, that slipped my mind with this whole mess.
ariekumbang said:
If you want to install xiaomi.eu rom dont just wipe data but you have to format data then type yes. Reboot to twrp again. And at twrp recopy the xiaomi.eu rom.
Click to expand...
Click to collapse
Cheers for the advice, I'll make sure to format before installing. Only issue now is that I can't get the rom onto the phone to install it. Do you reckon if I format the data through TWRP it will then allow me to copy over the rom onto the device? Currently, unless in fastboot, the laptop doesn't recognise the device - constantly reboots the phone causing it to connect and disconnect.
SPOCK_VULKAN said:
Flash last MIUI global dev. Flash twrp. Wipe only data. Transfer Rom to phone. Flash Xiaomi eu Rom. Done
Click to expand...
Click to collapse
I like the sound of this solution but I have a few questions/need clarification as this mess has made me doubt myself (no issue flashing my previous phone mi5)
I downloaded the Global rom from here: http://en.miui.com/download-346.html#523 (just want clarification this is the official rom) I have the latest version of the miFlash. Am I right in thinking, put phone into fastboot, launch tool, locate unzipped rom folder, select 'Clean all' (and not save user data / clean all and lock (presume this means bootloader)) and click Flash??
And then do I start again, flash TWRP and hope it works?
deepblue2000 said:
the only right answer, all other are more or less useless.
you need to wipe data, then format data (confirm with yes)
after that, hold power+up to reboot in twrp again
(or go to mainmenu and choose reboot to recovery),
connect your Mi8 with Usb cable to PC and copy the xiaomi.eu rom to your mi8
and then flash it.
Click to expand...
Click to collapse
If I do this (wipe data and format) will the laptop detect the device to allow me to move the rom onto the phone, currently it doesn't (well it loops between connecting and disconnecting when in TWRP, no issue detecting in fastboot)
normally if twrp is launched, you can copy files as usual from pc to your Mi8
should be a stable connection.. (Win7/10 or any other Win)
if it keeps connecting/disconnecting you can try an other usb port.
do you use the right twrp ?
https://forum.xda-developers.com/mi-8/development/recovery-twrp-3-2-3-0-mi-8-t3837745
and you enabled usb debugging in settings before you flashed twrp ?
(I think without it will not work, even to flash twrp it is needed, so you did it)
deepblue2000 said:
the only right answer, all other are more or less useless.
you need to wipe data, then format data (confirm with yes)
after that, hold power+up to reboot in twrp again
(or go to mainmenu and choose reboot to recovery),
connect your Mi8 with Usb cable to PC and copy the xiaomi.eu rom to your mi8
and then flash it.
Click to expand...
Click to collapse
deepblue2000 said:
normally if twrp is launched, you can copy files as usual from pc to your Mi8
should be a stable connection.. (Win7/10 or any other Win)
if it keeps connecting/disconnecting you can try an other usb port.
do you use the right twrp ?
https://forum.xda-developers.com/mi-8/development/recovery-twrp-3-2-3-0-mi-8-t3837745
and you enabled usb debugging in settings before you flashed twrp ?
(I think without it will not work, even to flash twrp it is needed, so you did it)
Click to expand...
Click to collapse
I've tried several USB ports and different cables, no luck getting it to connect.
No the TWRP installed is 3.2.1-0611-XIAOMI8, yours uses the code name and seems to be a newer version and more legit, I'm going to flash that onto the phone. I presume do it the way I did it before - fastboot, shift right click to get to cmd line...etc.
I did indeed enable usb debugging when I installed it originally.
By the way, thanks so much for your help, I'm lost without my phone - it was love at first sight
Fastboot Flashing Code
Code:
Fastboot boot Twrp.img
Flash the recovery img again inside twrp and reboot to recovery again and it will stay.
If u are new to twrp, format data in twrp and reboot to recovery again and flash this file https://androidfilehost.com/?fid=3700668719832238534 after that u can flash the rom.
If u have already twrp installed, just flash the img in twrp
Click to expand...
Click to collapse
Actually I'm confused now, is this probably where I went wrong in the first place.
Boot the TWRP img and then flash it through TWRP, I've never done it this way before (have I been doing this worng all along?)
and whats the other file about? Disable_Dm-Verity_FEC_v1.1.zip
Sorry about all the questions
you can flash/update twrp inside twrp itself, but you dont need it.
I never used any tools or bat files, just normally installed adb,
and put the twrp.img in the same folder.
then open cmd:
fastboot flash recovery twrp.img
to boot into twrp again:
fastboot boot twrp.img
never heard from this fec1.1 zip, so ignore it.
you should go to the xiaomi.eu forum for help,
https://xiaomi.eu/community/threads...ing-xiaomi-eu-8-8-30.46378/page-2#post-444327
there are the steps posted what to do
deepblue2000 said:
you can flash/update twrp inside twrp itself, but you dont need it.
I never used any tools or bat files, just normally installed adb,
and put the twrp.img in the same folder.
then open cmd:
fastboot flash recovery twrp.img
to boot into twrp again:
fastboot boot twrp.img
never heard from this fec1.1 zip, so ignore it.
you should go to the xiaomi.eu forum for help,
https://xiaomi.eu/community/threads...ing-xiaomi-eu-8-8-30.46378/page-2#post-444327
there are the steps posted what to do
Click to expand...
Click to collapse
Right, so I got TWRP 3.2.3 installed and seems to be working (not disconnecting and reconnecting) BUT the phone is still not recognsed - It says unspecified in the devices . I ran through the ADB set up, all installed including drivers but still no phone showing up. I hate windows 10 and drivers, can't get them to play nice (or it's me)
I had never any problems with Win10 x64,
I dnever installed any driver for my Mi5/6 and now 8,
win10 detects everything automatically, if you have installed any driver, maybe just
uninstall them and restart win10
deepblue2000 said:
I had never any problems with Win10 x64,
I dnever installed any driver for my Mi5/6 and now 8,
win10 detects everything automatically, if you have installed any driver, maybe just
uninstall them and restart win10
Click to expand...
Click to collapse
AND WE'RE IN!!! THANK YOU, THANK YOU!! If you were here I'd hug you and get you a drink.
Forget my above nonsense and babble, PC wasn't happy with whatever was going on, once I got brave enough and actually followed your instructions in all fell into place!!
So conclusion -
I had the wrong TWRP (3.2.3 is needed)
PC didn't like whatever was happening without the OS
Wiped and formatted through TWRP - Phone was recognised
Dragged Xiaomi.eu rom over - copied perfectly
Flashed rom - successful and the wiped cache again to be safe
Rebooted and my smile came back the moment I saw the 'powered by android' icon
Went through set up and I'm back in.
Mi 8 - bootloop and locked device, no system, help?
Hi guys,
I did a pretty much bad thing on my phone, I've just bought it 2 weeks ago and I was loving the phone, my phone is unlocked but today I was rooting to install google camera with night sight and I don't know why my twpr was really weird, when pressing install all the folder that was showing was very different from youtube videos about mi 8 root and even compared to my old devices, it was showing folders like licence and others, but the weirdest was inside the sdcard folder that was showing a lot of unnamed folders(like this: 54u3hu6ijj4!ji5), the thing got worse when I've flashed magisk and the phone got stuck on bootloop, after that tried to flash a stock global rom from official Mi website on fastboot mode using Mi Flash Toll, what I did wrong is that I didn't see that the Lock option was ticked and than I pressed to flash, everything was going good when my device showed a message saying that the Miui wasn't compatible with my phone. After that I've tried to install TWPR again but my phone was locked by the Mi flash toll and know my device is without system and unlocked. I've also tried to unlock but is saying that my account is not bound to my device, so I have no idea what to do, I'm gonna never root any phone ever, worse thing I did.
Can Anybody know what I can do to unlock the phone?
Sorry about my English, that's not my native language.
Hi, sorry for bad English.
I'm having trouble installing Custom ROMs on my Mi 8 Global. Any custom rom I install, after reboot on TWRP, the mobile does not start, it only stays on the fastboot screen or returns to the TWRP.
I already unlocked the bootloader, ADB ON, drivers installed on PC, TWRP OK, all neededs WIPEs ...
I can only install the STOCKs ROMs. I think the problem is when doing FLASH in the ROMs. It may be that I can only install ROM by Fastboot, but by Recovery not.
In the TWRP LOG, there is not a single error after installing the ROMs, always success.
I follow all the tutorials, but never start the system after installing by recovery.
Another thing I noticed is that when I install the custom rom, if I go in the TWRP file browser and go there in the SDCard folder, the files do not appear as it usually gets, such as the "Android" folder for example.
I've had several Androids since the Galaxy Y time and I've never had this problem.
Any idea?
format data "yes" then flash dm variety fix re oot recovery then flash any rom
Sent from my MI 8 using Tapatalk
altvolt74 said:
format data "yes" then flash dm variety fix re oot recovery then flash any rom
Sent from my MI 8 using Tapatalk
Click to expand...
Click to collapse
I followed all the tutorials, including the WIPEs
try another dm variety or recovery ........make sure is format data and not just wipe it and last ensure ur in pie firmware and not oreo
Sent from my MI 8 using Tapatalk
altvolt74 said:
try another dm variety or recovery ........make sure is format data and not just wipe it
Sent from my MI 8 using Tapatalk
Click to expand...
Click to collapse
Ill try this. Thanks!
null
I have the same problem as you, and my rom is only 10gb. Other roms can't recognize it. How do you solve this problem?
not
altvolt74 said:
try another dm variety or recovery ........make sure is format data and not just wipe it and last ensure ur in pie firmware and not oreo
Sent from my MI 8 using Tapatalk
Click to expand...
Click to collapse
i tried ,very bad,my phone still into fastboot.
Bruno Wagner said:
Hi, sorry for bad English.
I'm having trouble installing Custom ROMs on my Mi 8 Global. Any custom rom I install, after reboot on TWRP, the mobile does not start, it only stays on the fastboot screen or returns to the TWRP.
I already unlocked the bootloader, ADB ON, drivers installed on PC, TWRP OK, all neededs WIPEs ...
I can only install the STOCKs ROMs. I think the problem is when doing FLASH in the ROMs. It may be that I can only install ROM by Fastboot, but by Recovery not.
In the TWRP LOG, there is not a single error after installing the ROMs, always success.
I follow all the tutorials, but never start the system after installing by recovery.
Another thing I noticed is that when I install the custom rom, if I go in the TWRP file browser and go there in the SDCard folder, the files do not appear as it usually gets, such as the "Android" folder for example.
I've had several Androids since the Galaxy Y time and I've never had this problem.
Any idea?
Click to expand...
Click to collapse
1. wrong section
2. which twrp do you use, which firmware do you use...., what a rom do wanna flash
unlock bootloader , flash this Twrp
reboot to trwp, factory rest with "yes" reboot again to trwp flash the rom that u want
Bruno Wagner said:
I followed all the tutorials, including the WIPEs
Click to expand...
Click to collapse
Follow this step
1. Copy Miui rom 9.0.zip and which rom you want to sdcard.
2. Boot into twrp, then wipe data, cache.
3. Install Miui rom 9.0.zip (dont reboot after done)
4. In twrp, choose reboot twrp again, then then wipe data, cache
5. Install any custom rom you want. And flash disable dm-variety
6. Done and reboot
romano19 said:
Follow this step
1. Copy Miui rom 9.0.zip and which rom you want to sdcard.
2. Boot into twrp, then wipe data, cache.
3. Install Miui rom 9.0.zip (dont reboot after done)
4. In twrp, choose reboot twrp again, then then wipe data, cache
5. Install any custom rom you want. And flash disable dm-variety
6. Done and reboot
Click to expand...
Click to collapse
I ll try this. Thank u
You have to format data via typing "yes", it is not wiping data, it is button in twrp. After that everything gonna be ok.
maybe you should flash a miui based on android pie （globe developer version）
then use the latest twrp recovery （both wzsx and black pitch is ok）
Murik01 said:
You have to format data via typing "yes", it is not wiping data, it is button in twrp. After that everything gonna be ok.
Click to expand...
Click to collapse
Yes, I do. Dont work
Bruno Wagner said:
I ll try this. Thank u
Click to expand...
Click to collapse
Did you do something or you fix your problem?
NewbyCmUser said:
Did you do something or you fix your problem?
Click to expand...
Click to collapse
No, not a tip has solved the problem. Yesterday I spent all day trying different things, searching in several sites but nothing works. I'll have to settle for the ROM stock.
I had the same problem installing pixel experience you need to flash stock fastboot rom via miflash be careful, do not select the relock option, then install twrp, wipe system, caches and data and install your custom rom It worked for me.
Murik01 said:
You have to format data via typing "yes", it is not wiping data, it is button in twrp. After that everything gonna be ok.
Click to expand...
Click to collapse
i had same problem. and this format data has worked with "miui_MI8Global_8.12.20_c7a9af8587_9.0" i can flash it. phone working now but i will change rom tomorrow again.. i guess it will be brick in a couple days
Problem solved!
Sorry bad english, translated by Google Translate ...
Now I've been able to install custom ROMs. :laugh:
I tested Havok and Pixel Experience.
I'll speak the steps I did:
1 - Install the Stock Pie: MIUI Global Stable 10.1.2.0 (dipper_global_images_V10.1.2.0.PEAMIFI_20181211.0000.00_9.0_global_0099f5af5f)
Install with XiaomiMiFlash, at the bottom, check the option "Clean All".
NO INSTALL ON TWRP MODE.
2 - Start the system normal and make ADB ON
3 - Make Root
4 - Start the system normal again
5 - Install TWRP: recovery-TWRP-3.2.2-0711-XIAOMI8-CN-wzsx150 (use this version)
6 - WIPE > Advanced> System, Data, Cache
7 - Flash ROM: PixelExperience_dipper-9.0-20190111-2226-OFFICIAL
8 - Reboot System
9 - Ready!
10 - Optional Step (*recommended*) - Go again in TWRP and Wipe > System, Data, Cache, Internal Storage > Flash ROM > Reboot.
After this procedure I was able to install custom roms without problems.
Hello guys,
just wanna asking again,.. I was going to flash magisk on red magic. I already succeed in flashing the TWRP. But, unfortunately, the TWRP was asking for a password to Decrypt Data...
Does anyone know the solution for this?
I already try to put pin on android and use it on TWRP still no luck here. Is there is a way to decrypt the phone from the system itself??
any suggestions will be great :fingers-crossed:
ianseer said:
Hello guys,
just wanna asking again,.. I was going to flash magisk on red magic. I already succeed in flashing the TWRP. But, unfortunately, the TWRP was asking for a password to Decrypt Data...
Does anyone know the solution for this?
I already try to put pin on android and use it on TWRP still no luck here. Is there is a way to decrypt the phone from the system itself??
any suggestions will be great :fingers-crossed:
Click to expand...
Click to collapse
Flash official recovery from twrp website. If I remember right it will work. But change language to English
If you haven't already find solution you must do factory reset through twrp option to unlock it ,of course this action will wipe all your data.
strakell said:
If you haven't already find solution you must do factory reset through twrp option to unlock it ,of course this action will wipe all your data.
Click to expand...
Click to collapse
Data partition he needs to wipe.
ianseer said:
Hello guys,
just wanna asking again,.. I was going to flash magisk on red magic. I already succeed in flashing the TWRP. But, unfortunately, the TWRP was asking for a password to decrypt Data...
Does anyone know the solution for this?
I already try to put pin on android and use it on TWRP still no luck here. Is there is a way to decrypt the phone from the system itself??
any suggestions will be great :fingers-crossed:
Click to expand...
Click to collapse
1. You need to go in boot-loader mode: VOL DOWN and POWER - preferable from power off state and when logo appear release buttons.
2. unlock boot-loader (every time is needed if you want to modify recovery or anything else)
3. install original international recovery: http://www.mediafire.com/file/s3dyqlhsytsflpd/recovery-114.img/file
4. restart in RECOVERY...now you see original recovery : choose English and go and wipe USER DATA (!!!!!!IT WILL ERASE EVERYTHING, ANY IMG< MP# < EVERYTHING FROM INTERNAL MEMORY and DECRYPT IT !!!!!),
erase also cache!!!!!
5. Power OFF
6. Unlock boot-loader (yes, again!)
7. install TWRP 3.3.1 : http://www.mediafire.com/file/nsu9nr0pdknruxw/recovery-331.img/file
8. Boot into TWRP Recovery
9. now install "Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip" : http://www.mediafire.com/file/hquo5qjoi45hy9c/Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip/file
In this way you will decrypt your phone and prevent to encrypt it again on reboot. If you don't Disable verity and force encrypt phone will re-encrypt itself on reboot because Vendor partition contain settings to encrypt data. There is a chance that after step 8 you will need to reinstall original international ROM ver. 114 and immediately after that the "Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip"
After reboot successfully (and no encrypting data) go back to TWRP and flash the last magisk.
....If you want to try something else: Download the Resurrection Remix 8. 1, version 64 bit A only gapps from here: https://forum.xda-developers.com/project-treble/trebleenabled-device-development/resurrection-remix-phh-treble-t3767688
This one I found that is working also gapss.
You can find also other ROM (as system image!) here:
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-%28GSI%29-list ,
or here:
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
About treble experimentation here: https://github.com/phhusson/treble_experimentations/wiki/Frequently-asked-questions-%28FAQ%29
For example I like the DESCENDANT 3.1.1 : https://forum.xda-developers.com/project-treble/trebleenabled-device-development/descendant-android-pie-custom-rom-ver-t3840578 but I can not make working gapps on it....till now at least
So, I think i have opened your appetite!
have fun!
ABM30 said:
1. You need to go in boot-loader mode: VOL DOWN and POWER - preferable from power off state and when logo appear release buttons.
2. unlock boot-loader (every time is needed if you want to modify recovery or anything else)
3. install original international recovery: http://www.mediafire.com/file/s3dyqlhsytsflpd/recovery-114.img/file
4. restart in RECOVERY...now you see original recovery : choose English and go and wipe USER DATA (!!!!!!IT WILL ERASE EVERYTHING, ANY IMG< MP# < EVERYTHING FROM INTERNAL MEMORY and DECRYPT IT !!!!!),
erase also cache!!!!!
5. Power OFF
6. Unlock boot-loader (yes, again!)
7. install TWRP 3.3.1 : http://www.mediafire.com/file/nsu9nr0pdknruxw/recovery-331.img/file
8. Boot into TWRP Recovery
9. now install "Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip" : http://www.mediafire.com/file/hquo5qjoi45hy9c/Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip/file
In this way you will decrypt your phone and prevent to encrypt it again on reboot. If you don't Disable verity and force encrypt phone will re-encrypt itself on reboot because Vendor partition contain settings to encrypt data. There is a chance that after step 8 you will need to reinstall original international ROM ver. 114 and immediately after that the "Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip"
After reboot successfully (and no encrypting data) go back to TWRP and flash the last magisk.
....If you want to try something else: Download the Resurrection Remix 8. 1, version 64 bit A only gapps from here: https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
This one I found that is working also gapss.
You can find also other ROM (as system image!) here:
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list ,
or here:
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
About treble experimentation here: https://github.com/phhusson/treble_experimentations/wiki/Frequently-asked-questions-(FAQ)
For example I like the DESCENDANT 3.1.1 : https://forum.xda-developers.com/pr...escendant-android-pie-custom-rom-ver-t3840578 but I can not make working gapps on it....till now at least
So, I think i have opened you appetite!
have fun!
Click to expand...
Click to collapse
Does the songs are getting played into the gsi? Treble GSI have issues like overheating and no sound while playing music. Means no ringtones either. I had put logs for phh but he didn't worked as he is busy. As all gsi uses phh base and fixes, the issues are same across the gsi.
Plus- in pie Chinese vendor the treble support is gone. So no more treble in pie update. Only we have legacy support on 8.1.
I had tried to work onto updating Omni but my motherboard went down. It got burnt. You know how to cook ROMs right ! Why don't you try?
Plus the latest gsi no longer boot idk the reasons with the July updates. Reply to me I am trying to donate a device to anyone who can work on this phone
ABM30 said:
1. You need to go in boot-loader mode: VOL DOWN and POWER - preferable from power off state and when logo appear release buttons.
2. unlock boot-loader (every time is needed if you want to modify recovery or anything else)
3. install original international recovery: http://www.mediafire.com/file/s3dyqlhsytsflpd/recovery-114.img/file
4. restart in RECOVERY...now you see original recovery : choose English and go and wipe USER DATA (!!!!!!IT WILL ERASE EVERYTHING, ANY IMG< MP# < EVERYTHING FROM INTERNAL MEMORY and DECRYPT IT !!!!!),
erase also cache!!!!!
5. Power OFF
6. Unlock boot-loader (yes, again!)
7. install TWRP 3.3.1 : http://www.mediafire.com/file/nsu9nr0pdknruxw/recovery-331.img/file
8. Boot into TWRP Recovery
9. now install "Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip" : http://www.mediafire.com/file/hquo5qjoi45hy9c/Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip/file
In this way you will decrypt your phone and prevent to encrypt it again on reboot. If you don't Disable verity and force encrypt phone will re-encrypt itself on reboot because Vendor partition contain settings to encrypt data. There is a chance that after step 8 you will need to reinstall original international ROM ver. 114 and immediately after that the "Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip"
After reboot successfully (and no encrypting data) go back to TWRP and flash the last magisk.
....If you want to try something else: Download the Resurrection Remix 8. 1, version 64 bit A only gapps from here: https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688
This one I found that is working also gapss.
You can find also other ROM (as system image!) here:
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list ,
or here:
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
About treble experimentation here: https://github.com/phhusson/treble_experimentations/wiki/Frequently-asked-questions-(FAQ)
For example I like the DESCENDANT 3.1.1 : https://forum.xda-developers.com/pr...escendant-android-pie-custom-rom-ver-t3840578 but I can not make working gapps on it....till now at least
So, I think i have opened you appetite!
have fun!
Click to expand...
Click to collapse
You answering all of my question very nice and clear... Yes i will having fun next week, i hope... (Still in other city now, i need my phone)... But, when the time comes, i will try it and post the update here... big thanks, Appriciate it... Yes i'm hungry now
methuselah said:
Does the songs are getting played into the gsi? Treble GSI have issues like overheating and no sound while playing music. Means no ringtones either. I had put logs for phh but he didn't worked as he is busy. As all gsi uses phh base and fixes, the issues are same across the gsi.
Plus- in pie Chinese vendor the treble support is gone. So no more treble in pie update. Only we have legacy support on 8.1.
I had tried to work onto updating Omni but my motherboard went down. It got burnt. You know how to cook ROMs right ! Why don't you try?
Plus the latest gsi no longer boot idk the reasons with the July updates. Reply to me I am trying to donate a device to anyone who can work on this phone
Click to expand...
Click to collapse
If only i can help you guys out cooking the rom... I'm only animator and designer... Not chef programmer or coder
methuselah said:
Does the songs are getting played into the gsi? Treble GSI have issues like overheating and no sound while playing music. Means no ringtones either. I had put logs for phh but he didn't worked as he is busy. As all gsi uses phh base and fixes, the issues are same across the gsi.
Plus- in pie Chinese vendor the treble support is gone. So no more treble in pie update. Only we have legacy support on 8.1.
I had tried to work onto updating Omni but my motherboard went down. It got burnt. You know how to cook ROMs right ! Why don't you try?
Plus the latest gsi no longer boot idk the reasons with the July updates. Reply to me I am trying to donate a device to anyone who can work on this phone
Click to expand...
Click to collapse
YES, at this moment sound is a problem in GSI ROMs. In call you have sound but not in media.
I am still looking for solutions.
ABM30 said:
YES, at this moment sound is a problem in GSI ROMs. In call you have sound but not in media.
I am still looking for solutions.
Click to expand...
Click to collapse
There are logs on phh thread about sound and other issues on gsi. Take a look if you have any knowledge. You don't need to take logs again I guess. But new GSI don't even boot last time this month when I checked. Maybe I was wrong.
It's just my point of view. You should try to bring up lineageOs with Omni sources coz lot of developers are there to help you if you have knowledge. The device tress are there from Omni. Well 8.1 is still there as lineageOs is still updating and giving security fixes. And most of commits are there for ok our phones in Omni GitHub.
ABM30 said:
1. You need to go in boot-loader mode: VOL DOWN and POWER - preferable from power off state and when logo appear release buttons.
2. unlock boot-loader (every time is needed if you want to modify recovery or anything else)
3. install original international recovery: http://www.mediafire.com/file/s3dyqlhsytsflpd/recovery-114.img/file
4. restart in RECOVERY...now you see original recovery : choose English and go and wipe USER DATA (!!!!!!IT WILL ERASE EVERYTHING, ANY IMG< MP# < EVERYTHING FROM INTERNAL MEMORY and DECRYPT IT !!!!!),
erase also cache!!!!!
5. Power OFF
6. Unlock boot-loader (yes, again!)
7. install TWRP 3.3.1 : http://www.mediafire.com/file/nsu9nr0pdknruxw/recovery-331.img/file
8. Boot into TWRP Recovery
9. now install "Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip" : http://www.mediafire.com/file/hquo5qjoi45hy9c/Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip/file
In this way you will decrypt your phone and prevent to encrypt it again on reboot. If you don't Disable verity and force encrypt phone will re-encrypt itself on reboot because Vendor partition contain settings to encrypt data. There is a chance that after step 8 you will need to reinstall original international ROM ver. 114 and immediately after that the "Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip"
After reboot successfully (and no encrypting data) go back to TWRP and flash the last magisk.
....If you want to try something else: Download the Resurrection Remix 8. 1, version 64 bit A only gapps from here: https://forum.xda-developers.com/project-treble/trebleenabled-device-development/resurrection-remix-phh-treble-t3767688
This one I found that is working also gapss.
You can find also other ROM (as system image!) here:
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-%28GSI%29-list ,
or here:
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
About treble experimentation here: https://github.com/phhusson/treble_experimentations/wiki/Frequently-asked-questions-%28FAQ%29
For example I like the DESCENDANT 3.1.1 : https://forum.xda-developers.com/project-treble/trebleenabled-device-development/descendant-android-pie-custom-rom-ver-t3840578 but I can not make working gapps on it....till now at least
So, I think i have opened your appetite!
have fun!
Click to expand...
Click to collapse
Hello, me again...
I'm trying to do the method that you've explained...
there's a new problem... right now, already try to connect my phone to USB on pc, it always says "USB supplying power on attached device" even for fastboot mode it doesn't work the computer still not recognize anything.. already tried different computer, already tried different cables too... no luck...
Now, I can go to emergency recovery with stock nicely but cannot go to the usual recovery cuz i already installed twrp but the phone itself is encrypted device so nothing to do there, I'm thinking about wiping userdata from emergency recovery,... is it okay to do this? cuz maybe I'm thinking after I wiping the userdata and everything I can get my USB connection again (cuz before i've had similar issue but after install new rom it's working nicely almost with every cable),... what do u guys think? thanks in advance
ianseer said:
Hello, me again...
I'm trying to do the method that you've explained...
there's a new problem... right now, already try to connect my phone to USB on pc, it always says "USB supplying power on attached device" even for fastboot mode it doesn't work the computer still not recognize anything.. already tried different computer, already tried different cables too... no luck...
Now, I can go to emergency recovery with stock nicely but cannot go to the usual recovery cuz i already installed twrp but the phone itself is encrypted device so nothing to do there, I'm thinking about wiping userdata from emergency recovery,... is it okay to do this? cuz maybe I'm thinking after I wiping the userdata and everything I can get my USB connection again (cuz before i've had similar issue but after install new rom it's working nicely almost with every cable),... what do u guys think? thanks in advance
Click to expand...
Click to collapse
Well, if you are encrypted you will need to uncrypt your phone.
!!!!!!!But you will lose everithing saved in internal memory!!!!!!!!
Just follow steps 1 to 8 from my previous guide. Then you can reinstall the ROM. If you will install International ROM you will get encrypted again if you don't run Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip right after installing ROM in TWRP!!!!!!!
Wiping everything with original recovery is the best way to clear your phone!!! sometimes is mandatory this, even with advanced wipe in TWRP you wont achieve what you can with original recovery wipe!
Back to report...
Already finished all the things need to be done... and ABM30 method is working nicely.... now, I can enjoy all the root goodness in my red magic with original global rom.
really this is what I'm looking for... Thanks a lot.
Ps: just wanna share for the USB to pc connectivity problems: what I did was connect it on fastboot mode, and do fastboot command for unlocking your red magic.... wait around 5 min, unplug it if nothing happens, plug it again and wait again (until many times), after that you will see your fastboot command from wait mode into something successful... (i dunno why).
and then do reflash the recovery...
for the resurrection remix, I will try it and post it on new thread.... seems interesting
ianseer said:
Back to report...
Already finished all the things need to be done... and ABM30 method is working nicely.... now, I can enjoy all the root goodness in my red magic with original global rom.
really this is what I'm looking for... Thanks a lot.
Ps: just wanna share for the USB to pc connectivity problems: what I did was connect it on fastboot mode, and do fastboot command for unlocking your red magic.... wait around 5 min, unplug it if nothing happens, plug it again and wait again (until many times), after that you will see your fastboot command from wait mode into something successful... (i dunno why).
and then do reflash the recovery...
for the resurrection remix, I will try it and post it on new thread.... seems interesting
Click to expand...
Click to collapse
Why are flashing without any output. Flash phh treble and help in sorting out bugs.
methuselah said:
Why are flashing without any output. Flash phh treble and help in sorting out bugs.
Click to expand...
Click to collapse
I will... btw, do u know if we in treble. what happened with led strip on the back? is it only for notification? or turned off completely?
ianseer said:
I will... btw, do u know if we in treble. what happened with led strip on the back? is it only for notification? or turned off completely?
Click to expand...
Click to collapse
well it doesn't work. It's a part of kernel I guess. There are no sounds from loudspeaker. and there are huge issues with pie in phh treble. He needs logs for that. You can't even login into the google account. There are logs with on treble Phh thread. August images are there. Start taking logs after reading the thread. You will be happy to help him.
ianseer said:
I will... btw, do u know if we in treble. what happened with led strip on the back? is it only for notification? or turned off completely?
Click to expand...
Click to collapse
Did you posted any log?
ABM30 said:
1. You need to go in boot-loader mode: VOL DOWN and POWER - preferable from power off state and when logo appear release buttons.
2. unlock boot-loader (every time is needed if you want to modify recovery or anything else)
3. install original international recovery: [url]http://www.mediafire.com/file/s3dyqlhsytsflpd/recovery-114.img/file[/URL]
4. restart in RECOVERY...now you see original recovery : choose English and go and wipe USER DATA (!!!!!!IT WILL ERASE EVERYTHING, ANY IMG< MP# < EVERYTHING FROM INTERNAL MEMORY and DECRYPT IT !!!!!),
erase also cache!!!!!
5. Power OFF
6. Unlock boot-loader (yes, again!)
7. install TWRP 3.3.1 : [url]http://www.mediafire.com/file/nsu9nr0pdknruxw/recovery-331.img/file[/URL]
8. Boot into TWRP Recovery
9. now install "Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip" : [url]http://www.mediafire.com/file/hquo5qjoi45hy9c/Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip/file[/URL]
In this way you will decrypt your phone and prevent to encrypt it again on reboot. If you don't Disable verity and force encrypt phone will re-encrypt itself on reboot because Vendor partition contain settings to encrypt data. There is a chance that after step 8 you will need to reinstall original international ROM ver. 114 and immediately after that the "Disable_Dm-Verity_ForceEncrypt_02.04.2019.zip"
After reboot successfully (and no encrypting data) go back to TWRP and flash the last magisk.
....If you want to try something else: Download the Resurrection Remix 8. 1, version 64 bit A only gapps from here: [url]https://forum.xda-developers.com/project-treble/trebleenabled-device-development/resurrection-remix-phh-treble-t3767688[/URL]
This one I found that is working also gapss.
You can find also other ROM (as system image!) here:
[url]https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-%28GSI%29-list[/URL] ,
or here:
[url]https://forum.xda-developers.com/project-treble/trebleenabled-device-development[/URL]
About treble experimentation here: [url]https://github.com/phhusson/treble_experimentations/wiki/Frequently-asked-questions-%28FAQ%29[/URL]
For example I like the DESCENDANT 3.1.1 : [url]https://forum.xda-developers.com/project-treble/trebleenabled-device-development/descendant-android-pie-custom-rom-ver-t3840578[/URL] but I can not make working gapps on it....till now at least
So, I think i have opened your appetite!
have fun!
Click to expand...
Click to collapse
Hello sir, I followed each and every step, but device ended up in bootloop. Mostly a soft brick. Every time I power on the device, the logo comes and phone turns off.
I even tried to patch the fstab in /vendor/etc. Same results.
By the way, I could not get the V114 stock global rom which you have mentioned but was able to get V109 stock global rom. If you have the link of the stock rom you mentioned, please provide a link for it. I will just revert back to stock and use it that way. Seems like the device doesn't wants to have an unlocked bootloader and a uncrypted data state ?
ianseer said:
Back to report...
Already finished all the things need to be done... and ABM30 method is working nicely.... now, I can enjoy all the root goodness in my red magic with original global rom.
really this is what I'm looking for... Thanks a lot.
Ps: just wanna share for the USB to pc connectivity problems: what I did was connect it on fastboot mode, and do fastboot command for unlocking your red magic.... wait around 5 min, unplug it if nothing happens, plug it again and wait again (until many times), after that you will see your fastboot command from wait mode into something successful... (i dunno why).
and then do reflash the recovery...
for the resurrection remix, I will try it and post it on new thread.... seems interesting
Click to expand...
Click to collapse
I'm facing issues with this. I followed every step as mentioned by ABM30. But the device in now on bootloop. Infact, I do have the twrp as recovery but device state is locked and the system isnt booting up. Help please
Zenith9082 said:
I'm facing issues with this. I followed every step as mentioned by ABM30. But the device in now on bootloop. Infact, I do have the twrp as recovery but device state is locked and the system isnt booting up. Help please
Click to expand...
Click to collapse
you mean twrp mentioned that your device is locked?
Hi guys, i wanted to change my rom, from pixel launchher from october to newest one, as always i downloaded it, and newest twrp for mi a2, I turned phone in fast boot mode, flashed img of twrp using adb, then I copied .zip of newest pixel launcher to phone and wiped system data and cache, then wanted to flash my .zip and I did...but during the 'flashing' it stuck on step 1/2 for about 5 minutes, then changed to step 2/2 for a minute and finally told me thats its done. but its not, when i wanted to reboot it told me that 'no os installed' wth? help me please
tried to repeat all steps, change twrp image to older one, tried to change rom to another (but every one rom i tried was android 10 - no going back to 9 i know), nothing worked.
Im in a big need of this phone getting to work
BIG BEER for someone who will help me
After you flashed the ROM zip in TWRP go to Reboot and from there change slot (if you're on A select B and if you're on B select A). After that, reboot to system, the warning about not having an OS installed is normal, don't worry.
Lurensu said:
After you flashed the ROM zip in TWRP go to Reboot and from there change slot (if you're on A select B and if you're on B select A). After that, reboot to system, the warning about not having an OS installed is normal, don't worry.
Click to expand...
Click to collapse
I've never got that 'no os installed' when i was flashing any custom OS, anyway, wiped everything once again, booted twrp using adb, flashed once again and totally ignored that message, as you said, and wow there is system even if twrp is saying that there is not. thank you bro.
glabarovski said:
I've never got that 'no os installed' when i was flashing any custom OS, anyway, wiped everything once again, booted twrp using adb, flashed once again and totally ignored that message, as you said, and wow there is system even if twrp is saying that there is not. thank you bro.
Click to expand...
Click to collapse
It always happened to me with this device, I don't know why. You're welcome, I'm glad you fixed it
guys please, i need a quick help
I cant find the zip file in twrp, i wiped the data, and its gone now
I need a quick help, please