Related
I've followed the instructions to a T on the wiki but I'm having a few problems. I had to downgrade to RC29 and then put "recovery.img" and the HardSPL "update.zip" on the root of the memory card. I even finished with the telnet commands (which didn't seem to do anything) and flashed JesusFreke's 1.5 crb43. Now when I try to use the Terminal Emulator for abd commands I get a permissions error. In addition, nothing shows up in my Superuser Permission application leading me to believe that I may not have rooted properly.
Any help would be greatly appreciated.
I forgot to mention that I cheated and I don't know if that was a problem. I started with crb43 and used the old exploit to downgrade to rc29 (format sd card, copy rc29 update.zip to root of card, enter bootloader mode and flash).
SharpieMarker said:
I've followed the instructions to a T on the wiki but I'm having a few problems. I had to downgrade to RC29 and then put "recovery.img" and the HardSPL "update.zip" on the root of the memory card. I even finished with the telnet commands (which didn't seem to do anything) and flashed JesusFreke's 1.5 crb43. Now when I try to use the Terminal Emulator for abd commands I get a permissions error. In addition, nothing shows up in my Superuser Permission application leading me to believe that I may not have rooted properly.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
You should be using adb for terminal commands. If you type 'adb' in the terminal you will get nothing.
Go to terminal emulator and type 'su'
if it brings up the permission screen press 'allow'
if your command line changed from '$' to '#' then you have successfully rooted.
There shouldn't be anything in superuser permissions if you haven't given any apps permissions (every app is considered a different user)
Hope this helps, but this seems like a thread that would be better suited to the Q&A or Dream topics since this is the Development section not general questions...just thought I'd mention it.
Just AIM me: Breakthecycle2
Breakthecycle2 said:
Just AIM me: Breakthecycle2
Click to expand...
Click to collapse
I can't use AIM at work. I am better reached at [email protected]
I think that worked. su brought up permissions window and when I select allow I now have root. Brilliant. Thanks very much for the assistance.
EDIT:
Oops
Then what am I missing about this? I'm attempting to replace these files to increase my maximum volume and I'm unable to use any of the adb commands, even with root.
adb remount
- wait for the 'remount succeeded' message
adb push Desktop/AudioFilter.csv system/etc
adb push Desktop/AudioPara4.csv system/etc
adb push Desktop/AudioPara4_TMUS.csv system/etc - Optional
SharpieMarker said:
Then what am I missing about this? I'm attempting to replace these files to increase my maximum volume and I'm unable to use any of the adb commands, even with root.
adb remount
- wait for the 'remount succeeded' message
adb push Desktop/AudioFilter.csv system/etc
adb push Desktop/AudioPara4.csv system/etc
adb push Desktop/AudioPara4_TMUS.csv system/etc - Optional
Click to expand...
Click to collapse
adb is the Android Device Bridge that allows you to interface your G1/Magic with an x86 Windows system. It is included in the Android Developer Toolkit.
You need windows and to have your G1 connected to your computer. There are a few really good threads giving step by step walkthroughs on setting it up correctly, just use the search.
ADB for Dummies
ADB for Dummies
ADB can't be used from terminal emulator on the phone...you have to use it from your windows command prompt...read up on ADB first.
ok... i am a little confused to what "adb" is and how to get "su" (superuser) via a Terminal app that i downloaded for my phone.
I type "su" and and I get "su: not found" same with "adb"
what am i not understanding?
trying to follow http://forum.xda-developers.com/showthread.php?t=797397 but the commands are not working..
i am a little new to my captivate here, so help me out. I install 2.2 and i would like to root it..
thanks in advance, and forgive my ignorance.
ADB is the Android Debug Bridge. You can read what it is here Android Debug Bridge
To use this you must first install the Android Software Development Kit found here Download the Android SDK
Read up a bit on those and search the forums to find more help. Good luck.
I was / am in the same boat.
I spent 4 hours last night getting it figured out, I sure wish I could find an Android for dummies book.
Anyway, here is what cha do....
once you dowload the adb package unzip it to the root of your c drive, you may want to rename it to some thing shorter, I just called it android.
next download the root package from the root thread here and unzip the files and copy or cut them into the tools folder of the ADB folder you placed on the root of C:
navigate to the tools folder and copy adb.exe and adbwinapi.dll to the system32 directory in windows, you will need to reboot. This will allow you to use the windows cmd line.
now I am on window 7 64 so I ran the commond line as administrator to be safe. to do this click start all prograns accessorires right click cmd and select run as admin.
change directory to the tools folder, for me "cd c:\android\tools"
Connect phone be sure usb debugging is on in the phone, (settings, application, development. it will install drivers. (I manually installed the samsung 64 bit drivers I had downloaded from samsung)
from the command promt type adb devices and hope fully it will see your phone and return with the serial number and them you are good to go with following the instructions to root from there.
I hope this helps...
Cappy
the information on how to use this is really not in one place, I spent 4 hours last night searching all over to figure it out, just so I would not ask and be belittled because there is NOT good information.
I have even been searching for any books I can find on Android so I can understand how this system works, but have found no good ones yet.
I need a nice Android for dummies type thing.
I spent an hour just to figure out it still won't run right unless you change directory to the tools folder where everything is at. ( it's been like 15 years since I messed with dos).
Some where in the wiki or bibles or all the other how toos being posted we really need better information on how to use the tools and what they are.
Cheers
Jeff
http://www.google.com/search?sourceid=chrome&ie=UTF-8&q=android+for+dummies
WOOT looks like they have one now...
Quick Tip: Once you get the Android SDK installed, you can add the location of the Tools directory to the Windows path variable and be able to call the programs from anywhere on your computer.
Masacrk said:
Cappy
the information on how to use this is really not in one place, I spent 4 hours last night searching all over to figure it out, just so I would not ask and be belittled because there is NOT good information.
Click to expand...
Click to collapse
Sorry you feel I was trying to belittle you. I was trying to be helpful by pointing you to the proper information. You know the old saying, "You'll never learn by letting others do it for you."
Sent from my SAMSUNG-SGH-I897 using XDA App
it's all good man I did not mean you.
I was taught along time ago that there are no dumb questions but it don't seem to hold true around here I have noticed.
Quess the new generation are not as patient or willing to help as mine was.
Ha ha ha. Guess I should have picked a better screen name.
Sent from my SAMSUNG-SGH-I897 using XDA App
ugg.. I dont get it.. I finaly got it to connect to the phone, but even in windows when i type in SU I get invalid command..
uggg..
i dont get it.. please help!
go to this thread
http://forum.xda-developers.com/showthread.php?t=797397
at the bottom of the first post you will see a link to Captivate2.2rootpack.zip.
http://forum.xda-developers.com/attachment.php?attachmentid=411708&d=1285997559
download , unzip, copy contents to the tools folder of the sdk package.
Also this thread was a help,
http://forum.xda-developers.com/showthread.php?t=502010
Cheers
Jeff
Masacrk said:
go to this thread
http://forum.xda-developers.com/showthread.php?t=797397
at the bottom of the first post you will see a link to Captivate2.2rootpack.zip.
http://forum.xda-developers.com/attachment.php?attachmentid=411708&d=1285997559
download , unzip, copy contents to the tools folder of the sdk package.
Also this thread was a help,
http://forum.xda-developers.com/showthread.php?t=502010
Cheers
Jeff
Click to expand...
Click to collapse
thanks.. i think i got that far,.. I copied the files into the tools folder and I still get
Code:
$ su,busybox,sqlite3
su,busybox,sqlite3
su,busybox,sqlite3: not found
$
i even copied the files to the android, and ran it from that folder.. still no luck
what am i doing wrong?!? gosh.. i never felt soo dumb about things like this before
eatonjb said:
thanks.. i think i got that far,.. I copied the files into the tools folder and I still get
Code:
$ su,busybox,sqlite3
su,busybox,sqlite3
su,busybox,sqlite3: not found
$
i even copied the files to the android, and ran it from that folder.. still no luck
what am i doing wrong?!? gosh.. i never felt soo dumb about things like this before
Click to expand...
Click to collapse
OK. took me a little while to figure this out, too. Not sure of your level of knowledge of the terminal. If I over-simplified please forgive me.
"Extract RootPack zip file" Did you do this? I think you did from you post. Make sure you've copied the files to your "tools" subfolder in the android sdk folder.
Click the start button, click run, type "cmd", press enter.
When that window opens type "cd.." and press Enter. Keep typing "cd.." and pressing Enter until the only thing you see at the prompt is "c:\"
Now navigate to the Tools folder where ever it is you put the android sdk.
I put mine at "c:\android_sdk" so I would type "cd c:\android_sdk\tools"
Plug your phone into your computer.
Go to home screen>menu>settings>applications>development and select "USB debugging".
At the command prompt type "adb devices" and your phone should return a value (the serial number).
If that works you should be able to follow the directions below.
It's been mention that you should be able to copy the commands from the web page and right click the terminal window and select "Paste". Makes everything faster, easier and more accurate. One other thing to mention: after you perform these steps and you want to do something else through adb where you're instructed to type "su" you'll need to open the SuperUser application on your phone and press "approve" after typing "su".
adb push rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage-arm5.bin
adb shell
cd /data/local/tmp
chmod 0755 rageagainstthecage-arm5.bin
./rageagainstthecage-arm5.bin
(wait for you to get kicked from adb)
adb shell
mount -o rw,remount /dev/block/stl9 /system
exit
adb push su /system/bin/su
adb push busybox /system/bin/busybox
adb push sqlite3 /system/bin/sqlite3
adb push superuser.apk /system/app/superuser.apk
adb shell
cd /system/bin
chmod 4755 su
chmod 4755 busybox
chmod 4755 sqlite3
reboot
eatonjb said:
thanks.. i think i got that far,.. I copied the files into the tools folder and I still get
Code:
$ su,busybox,sqlite3
su,busybox,sqlite3
su,busybox,sqlite3: not found
$
i even copied the files to the android, and ran it from that folder.. still no luck
what am i doing wrong?!? gosh.. i never felt soo dumb about things like this before
Click to expand...
Click to collapse
those arent even commands. just random words you put into the terminal....
follow the instructions exactly like PersonOfKnownOrigin has posted. it works
I too was having trouble, turns out the files were extracted and were in a sub folder in the Tools folder so I copied and pasted them directly into the tools folder one by one, that worked great for me. Also, I find it easier to open command shell and use the Android Tools by holding the shift key and right clicking on the Tools folder and choose open command window here. I hope this helps.
I have a stupid path becaue my laptop messed up when I first got it and I haven't been able to fix it because DOS is difficult to me. It works fine but I am too lazy to type such a long path and if you are off at all it dosen't work.
just copy and paste the commands so you don't get them wrong, worked for me. The command is su then hit enter then enter the next command line and hit enter, works like a charm.
ok, I got it.. I misinturpted that the first line (the 3 commands in one line) was a command that I was supposed to run..
it was not..
dohh.. thanks guys for all the help... i felt kinda dumb, but now I think I am kinda smrt. I mean Smart!! (Simpsons Humor)
thanks again for the paitence.
Eaton
I have been trying to make this whole adb think work for about twenty hours strait and I still have not gotten very far. I own a mac and no pc and updated to froyo with my buddies pc. I have followed all the directions to a T over and over using terminal on the mac and I can get to the ADB commands and even to where I can see my phone by clicking devices but I must be missing something important. ANY HELP WOULD BE REALLY APPRECIATED I AM ABOUT TO PULL MY FREAKING HAIR OUT!!!
Ok, so if you can see your phone through adb, then you are definitely on the right track. Unfortunately, I'm not really familiar with OS X anymore so I'm not quite sure how to do it. Just sit tight for now until someone who does use a Mac, or has more of a clue then I do can help you out.
But seriously, don't pull your hair out. It won't stay on your head forever ya know...
Edit: oops, just saw this is JI6 (Froyo) not JF6, so I can't help you, but here is a general overview:
from terminal inside Android sdk main directory:
tools/adb devices -> list all devices connected that ADB can see
tools/adb shell -> gets a normal user shell on your phone
tools/adb reboot recovery -> reboots into recovery mode, suitable for update.zip root method
--------------------------------
Place the root update.zip on internal sdcard.
from terminal inside Android sdk directory:
tools/adb reboot recovery
Select the update software option, and you will be done.
laxwillsch said:
I have been trying to make this whole adb think work for about twenty hours strait and I still have not gotten very far. I own a mac and no pc and updated to froyo with my buddies pc. I have followed all the directions to a T over and over using terminal on the mac and I can get to the ADB commands and even to where I can see my phone by clicking devices but I must be missing something important. ANY HELP WOULD BE REALLY APPRECIATED I AM ABOUT TO PULL MY FREAKING HAIR OUT!!!
Click to expand...
Click to collapse
Start simple:
If you open a terminal on the mac, and go to your android SDK tools folder; what happens when you type ADB shell?
Or if you type any of the ADB push commands?
You need to give more detail around what you are seeing for us to help you.
Ok so if I am in terminal and i type in my /android-sdk-mac_x86/tools nothing happens and it just says /android-sdk-mac_x86/tools is a directory. But if I type the same but with /tools/abd it opens the abd command lines, like how to write code. Then when I try to "adb push rageagainstthecage-arm5.bin /data/local/tmp/rageagainstthecage-arm5.bin"
it says "-bash: adb: command not found"
however when I type laxwillsch$ /android-sdk-mac_x86/tools/adb shell
it does give me the drop down $
but when I then try to write the next line of code "chmod 0755 rageagainstthecage-arm5.bin"
it says "chmod: rageagainstthecage-arm5.bin: No such file or directory"
I am stumped I am beginning to think i need to buy a pc as I am very interested in android development and want to learn more, but it seems all the tutorials are run assuming you are on a PC
EDIT** I have downloaded the android SDK started pack, and the 2.2 root pack and they are all in my /android-sdk-mac_x86/tools folder that is directly on my Macintosh HD for simplicity
Do you know how to change directories (cd command)?
The problem is that you are trying to work in one directory, but all your tools are in another.
So change directories to the tools directory:
cd /android-sdk-mac_x86/tools/
now run your adb commands - you may have to type ./adb to tell your mac to look in the current directory for the adb command (that is what ./ means "start here")
Also, try to understand what is happening so you can more easily troubleshoot: chmod is a command to change permissions, and you are running it on the phone. If you can't push the file to the phone, then you can change it's permisssions. I guess you never got rageagainstthecage on the phone, so there is no way to chmod it.
If you can't do this on a mac, a PC is not easier. I use both, and like both, but you need to learn basic commands first - they apply to the mac terminal and the windows cmd prompt.
Getting root means moving in and out of the phone - adb shell - puts you in a terminal on the phone. So you really need to understand cd (change directory); pwd (present working directory - shows you where you are); cp (copy); and know your current path - what the ./ does.
I hope this helps, not trying to sound condescending - maybe practice a linux terminal tutorial would help
Thanks so much, I am at school right now and cant test out all that but you are really helping me understand all this! I will post tonight and let you know how it goes. again thank you
ok so i dont have my usb cable with me but I was playing around with the commands that you suggested and ureka! i finally got to a point where it says "h70-33-65-19:tools laxwillsch$" thats a first! and when i type pwd it shows "/android-sdk-mac_x86/tools" so that means I am working out of the right directory right? and from here I enable usb debugging connect my phone then just copy and paste the codes from the thread correct?
yes, it sounds like you are on the right track. But take it nice and slow when you follow the steps. It is very important that the commands are entered exactly as you see them.
Also, one step tells you to wait for something to run and kick you out of ADB - wait just like it says - takes about 45 seconds but feels like forever.
If you are in the tools directory - just by typing "adb" no quotes will give you whole page of adb commands - if you get a "command not found", then you need to add the ./ and make it ./adb
Hope this helps and again, read the commands step by step a couple times first so you understand what is happening.
In a nutsell, you push the rage file;
change its permissions, run it;
get kicked out of ADB and then open a new ADB shell;
you are now root;
remount the system partition to give you write access when it reboots;
reboot;
push over some files;
change permissions on files you pushed;
reboot;
Some things to know - SU is a command for gaining root access; when you use SU your prompt changes (in adb shell) from $ to #
If you are succesful you should see the SuperUser app listed in your apps.
Done and Done just rooted successfully couldnt have done it without you! thanks so much
I have wiped and restored more times tonight than I can count....HELP!!!! I have a very lean rom. So lean it that it has no file explorer and I don't want to install gapps. All I want to do is install Titanium Backup (the .apk file is on the root of my SD card) with the terminal emulator and I'll be all set. I have had all different error messages, and I'm more confused now then when I started this adventure, 6+ hours ago. Any help would be great.
hockeyfamily737 said:
I have wiped and restored more times tonight than I can count....HELP!!!! I have a very lean rom. So lean it that it has no file explorer and I don't want to install gapps. All I want to do is install Titanium Backup (the .apk file is on the root of my SD card) with the terminal emulator and I'll be all set. I have had all different error messages, and I'm more confused now then when I started this adventure, 6+ hours ago. Any help would be great.
Click to expand...
Click to collapse
Just download a file manager, (es fileexplorer, or root explorer) and install it that way. or if you have adb and all the drivers you need for it.
Put the .apk in the tools folder in the SDK
and go to it in a command prompt and type adb install titaniumbackup.apk..
Or whatever you apk is named.
if you need help, dont quote this, just send me a pm for help =]
(Posting this again for others reference all this is pulled from my previous post which you can find in my signature - "Terminal/adb shell commands")
Adb commands are completely different than terminal commands.
First enter "su" to get substitute user (the # sign)
Then enter "mount -o remount,rw -t yaffs2 /dev/block/mtdblock4 /system" to make the root r/w
to copy files use "cp" command
to move files use "mv" command
to remove files use "rm" command
to change file/dir permissions use "chmod"
to change directories use "cd" - "cd .." will bring you back one directory - "cd //" brings you back to root
to list files in the dir use "ls"
to read/mod/combine a file use "cat"
to edit a value use "echo"
to see running processes use "top"
to kill a process use "kill -9 PID#HERE"
ex) cp /sdcard/download/myapplication.apk /data/app/myapplication.apk
If you know any linux commands then you should know your way around terminal emulator. If you want i can give you more examples just let me know. Hope this helped
To answer your question OP, just follow my example. Except in your case it'd be something like this:
Code:
su
cp /sdcard/TitaniumBackup.apk /data/app/TitaniumBackup.apk
replace "titaniumbackup.apk" with the actual file name of your apk file.
Sent from my Android using Tapatalk
kyouko said:
(Posting this again for others reference all this is pulled from my previous post which you can find in my signature - "Terminal/adb shell commands")
Adb commands are completely different than terminal commands.
First enter "su" to get substitute user (the # sign)
Then enter "mount -o remount,rw -t yaffs2 /dev/block/mtdblock4 /system" to make the root r/w
to copy files use "cp" command
to move files use "mv" command
to remove files use "rm" command
to change file/dir permissions use "chmod"
to change directories use "cd" - "cd .." will bring you back one directory - "cd //" brings you back to root
to list files in the dir use "ls"
to read/mod/combine a file use "cat"
to edit a value use "echo"
to see running processes use "top"
to kill a process use "kill -9 PID#HERE"
ex) cp /sdcard/download/myapplication.apk /data/app/myapplication.apk
If you know any linux commands then you should know your way around terminal emulator. If you want i can give you more examples just let me know. Hope this helped
To answer your question OP, just follow my example. Except in your case it'd be something like this:
Code:
su
cp /sdcard/TitaniumBackup.apk /data/app/TitaniumBackup.apk
replace "titaniumbackup.apk" with the actual file name of your apk file.
Sent from my Android using Tapatalk
Click to expand...
Click to collapse
i know theyre different,i was getting a point across, in which if he cant get it too work, try adb. Even though errors with TE usually means youre not entering something correct
davidevan said:
i know theyre different,i was getting a point across, in which if he cant get it too work, try adb. Even though errors with TE usually means youre not entering something correct
Click to expand...
Click to collapse
Yea they are. Besides, personally I'd do it the way you mentioned; either first using a filemanager (easiest imo) or via adb install
Only reason I replied was in case there was a specific reason he'd only want to use terminal emulator and not adb or a FileMan
Edit: Oh I see what I think you're referring to, the line:
Adb commands are completely different than terminal commands.
Click to expand...
Click to collapse
That was just directly copied from a post I made before something about wanting to "adb push" with TE, it had nothing to do with your response
Sent from my Android using Tapatalk
Thank you everyone. I need to use Terminal Emulator, because I'm not allowed to install the ADB drivers on my work computer, the ROM I want to use did not have a file manager packed in it and I don't want to install gapps to download one from the market. I simply want to install Titanium, so I can add a file manager and a couple of other select apps so as not to clutter up the system. As soon as I flash back to that rom, I'll try it the above mentioned way.
hockeyfamily737 said:
Thank you everyone. I need to use Terminal Emulator, because I'm not allowed to install the ADB drivers on my work computer, the ROM I want to use did not have a file manager packed in it and I don't want to install gapps to download one from the market. I simply want to install Titanium, so I can add a file manager and a couple of other select apps so as not to clutter up the system. As soon as I flash back to that rom, I'll try it the above mentioned way.
Click to expand...
Click to collapse
Ah thats sucks bro, it come in handy now and then, Listen to this guy up here since he knows more about TE than I. Also a simple google "terminal emulator" command and it might add on to your comprehension.
And judt to get this outta of the way, in TE if you do type su <enter> you get #? if you dont #,you get acces denied; denied meaning youre not rooted. Meaning it cant find an su in the bin or xbin, rendering TE pointless. So make sure youre root
hockeyfamily737 said:
Thank you everyone. I need to use Terminal Emulator, because I'm not allowed to install the ADB drivers on my work computer, the ROM I want to use did not have a file manager packed in it and I don't want to install gapps to download one from the market. I simply want to install Titanium, so I can add a file manager and a couple of other select apps so as not to clutter up the system. As soon as I flash back to that rom, I'll try it the above mentioned way.
Click to expand...
Click to collapse
btw click my thanks meter ;]
its the ony thing i have left lmao! :'(
davidevan said:
Ah thats sucks bro, it come in handy now and then, Listen to this guy up here since he knows more about TE than I. Also a simple google "terminal emulator" command and it might add on to your comprehension.
And judt to get this outta of the way, in TE if you do type su <enter> you get #? if you dont #,you get acces denied; denied meaning youre not rooted. Meaning it cant find an su in the bin or xbin, rendering TE pointless. So make sure youre root
Click to expand...
Click to collapse
and how is your computer not compatible with SDK. You dont have Windows, linux or Macc?
davidevan said:
and how is your computer not compatible with SDK. You dont have Windows, linux or Macc?
Click to expand...
Click to collapse
It's not an issue of compatibilty..... It's an issue of the IT people at work having our computers locked up so we can't install / uninstall anything from them. All I can do is transfer files from the pc to my sd. I don't have authorization to install the necessary drivers for my phone.
hockeyfamily737 said:
It's not an issue of compatibilty..... It's an issue of the IT people at work having our computers locked up so we can't install / uninstall anything from them. All I can do is transfer files from the pc to my sd. I don't have authorization to install the necessary drivers for my phone.
Click to expand...
Click to collapse
If you can transfer files from a computer to a device, then you should be able to take files from a USB drive and put them on the C drive of your computer.
waffle_ said:
If you can transfer files from a computer to a device, then you should be able to take files from a USB drive and put them on the C drive of your computer.
Click to expand...
Click to collapse
To clarify.... Yes I can access my sd card from my computer. Yes I can transfer files between my sd card and my hard drive. However, when I try to install the ADB drivers to access the rom in my phone I get a little message that I'm not authorized to add / remove hardware or software from the computer....to please contact my IT administrator. Maybe it's something I'm doing wrong, maybe it's not. If I can learn to use this emulator though, it doesn't really matter. I have ADB on my computer at home if I really need it, I'm just not inclined to turn the computer at home on very often. Thanks again to everyone for the help.
"
hockeyfamily737 said:
To clarify.... Yes I can access my sd card from my computer. Yes I can transfer files between my sd card and my hard drive. However, when I try to install the ADB drivers to access the rom in my phone I get a little message that I'm not authorized to add / remove hardware or software from the computer....to please contact my IT administrator. Maybe it's something I'm doing wrong, maybe it's not. If I can learn to use this emulator though, it doesn't really matter. I have ADB on my computer at home if I really need it, I'm just not inclined to turn the computer at home on very often. Thanks again to everyone for the help.
Click to expand...
Click to collapse
Search the dev thread for my guide on how to install adb. Might do the job for your work computer. Or just hit my avatar and find the thread that way. If you do try it let me know if it works.
#Root/Hack_Mod-Always®
laie1472 said:
"
Search the dev thread for my guide on how to install adb. Might do the job for your work computer. Or just hit my avatar and find the thread that way. If you do try it let me know if it works.
#Root/Hack_Mod-Always®
Click to expand...
Click to collapse
Sitll no good installing ADB at work, but I did get a good ADB workout at home this weekend rooting my son's Optimus......Wholy crap!!! Revert to old software, lose the lcd display, root with rage against the cage, push recovery to the phone, revert back to current version of software, lose root, and then re-root on current software with recovery already installed, what a process that was!!!! BTW.... Terminal Emulator commands worked perfect. Mistake I was making was trying to "push" from my SD card instead of "copy".
Trying to be charitable and cautious, I'm trying to back up my EFS folder before I go messing around and it is consistently failing. I'm using:
SGS Tools Vz 0.5.7
Busy Box Vz1.17.2
On my previous captivate this works just fine. Now I get
"could not create backup folder /sdcard/SGSToolbox/backup (date string)" and then the bluebox saying creating backup. This never goes away and to clear I have to reboot.
Any helpful hints?
I tried to download the latest and greatest SGS Tools but Google knows I have it installed and won't let me get the newest one. Haven't figure out how to get around that unless I just have to un-install my current one.
Rooted 2.2, KB2, running existz KB1 kernel.
Knowing there are no successful backups... just successful restores.
If you're willing to use your computer and can get the Android SDK and ADB going, just get into a command prompt in the ADB directory and type "adb pull /efs". That will back it up to your computer.
Or you could open a file explorer and copy the directory from there to your sd card
You could use an app called nitrality
Sent from my SGH-I897 using XDA App
Try to update your su binary, the simpliest way is use Root Explorer to backup whatever u want
Well just to be daring, I tried to install the ADB tools. Had to install the Java development software first. After I installed what I thought was the ADB suite, I can't seem to find the place to type in commands, dumb as that sounds. I may not have gotten the right package. Going to tinker with it though.
My SU is up to date.
I can see the folder with Super Manager so I guess I'll just copy with that. Interesting though I can't see anything in the /efs directory. Probably just something else I don't understand.
Still curious though as to why SGS Tools is failing... part of my nature.
Thanks to all that replied.
Make a note of where adb is installed (e.g. c:\users\person\Android-sdk-windows\platform-tools). Then hit the windows key and R, and type cmd. Once in the prompt, type CD (directory from before, no parentheses) and hit enter. From there, type your adb commands.
Ahhhh.... I get it. Was expecting something a bit more elegant. Gotta love DOS commands.
Well..there are a couple more elegant ways to do it.
Open up a new note in NotePad, just type:
Cmd
Exit
And save, but instead of a .txt file extension save it as a .bat, now drop that into your adb directoty, then just double click on that to open a prompt in that directory, so you don't have to do the cd command every time.
Or..the most elegant way is to add adb to your environmental variables so you can enter adb commands from anywhere
That's a good solution. I've got a set of files put into my C:\Users\(my username) folder called "adb", "adbr" (adb reboot), "adbrd" (adb reboot download), and "adbrr" (adb reboot recovery).
Each of these is a .bat file with a version of this text in it:
@ echo off
cd "C:\Users\(me)\Other\tools\android-sdk-windows\platform-tools"
adb reboot
That way, all I have to do is hit Win-R and type one of those file names and it does that command for me. Or, I can type cmd, then adb, and automatically be where adb is installed without cd'ing through a long file list.
My suggestion is Root Explorer. I was able to backup the EFS directory without problems also create a .tar file.
I used root explorer to do my backups, another option is the explorer inside the rom tollbox aplication its also very good
Now I have another adb question...
First off, now I'm just trying to learn and get better. I've built my bat files and I can get adb working. Thanks to those that helped with that. When I tried to pull the /efs folder it said there was no device recognized. I was in "mass storage" mode at the time.
Whenever I've seen people talk about using adb, I don't recall anything being said about if it should be in Download, debug or what. One of those assumed knowledge things.
So what do I have to do to the phone to let adb recognize it?
gnawing on the bone....
I'm also thinking of pulling a logcat or something when SGS tools fails... just to see. That's my next step.
Enable usb debugging in settings> applications> development
SGS Toolbox doesn't work with efs backups. Are there easier ways to do the backup?
Adb or root explorer.
I did both... just to say I did it and finally got adb working.