Related
Hi, I wanted to flash the 5.1 update to my new Nexus 6.
I went all over the basic steps.
After I unlocked the bootloader I tried to flash the image with the flash-all command.
It failed, so I remembered maybe I forgot to click on USB debugging? (This confuses me because I think I shouldn't be able to unlock bootloader without this).
When I wanted to start android I locked it first, so I would unlock it afterwards and erase everything to start as new.
Whan I locked it, I could not unlock it again. I can't access Android, neither do anything else like factory reset nor Recovery Mode. I return to the bootloader as soon as I press anything.
There are red words at the top: AP Fastboot Flash Mode (Secure). Does this means anything?
Is there any way to force unlocking the bootloader? When I try it, the phone tells me to go to Developer Options but I can't access Android.
Please HELP! Is there any way to flash a rom or android again in locked state? Recovery?
Thanks for reading this and thinking about a solution! I really hope I won't be stuck forever in bootloader.
Uh oh... Were you trying to downgrade back to LRX22C from LMY47D so that you could upgrade to LMY47M, by any chance?
If so you might be fooked.
Actually no. I was trying to upgrade from 5.01 to 5.1. I'm really scared of having my Nexus 6 bricked. I can't do anything to unlock the bootloader. Maybe I could sideload a recovery? But do I need to be unlocked?
Sent from my Nexus 7 using XDA Free mobile app
Try here this might help you. I hope.
http://forum.xda-developers.com/showthread.php?t=3059518
I hope you get it sorted out. I have read SO many bad things regarding this topic and people being screwed that they cant get back in to re-unlock after relocking
toknitup420 said:
Try here this might help you. I hope.
http://forum.xda-developers.com/showthread.php?t=3059518
Click to expand...
Click to collapse
I already tried this solution, I think mine is a little different. At the end of the post it says to enter fastboot and restore with a factory image. I can't because I am not unlocked. In order to unlock my device I have to go to Developer Settings (it is the message when I use the OEM unlock command). but I can't access to Android. I am stuck in the bootloader but can run fastboot commands.
sotnasnauj said:
I already tried this solution, I think mine is a little different. At the end of the post it says to enter fastboot and restore with a factory image. I can't because I am not unlocked. In order to unlock my device I have to go to Developer Settings (it is the message when I use the OEM unlock command). but I can't access to Android. I am stuck in the bootloader but can run fastboot commands.
Click to expand...
Click to collapse
The solution that was posted should work, but you need to use RSD Lite in order to flash the factory image, not fastboot.
Read it over nice and slow again, because you are in panic mode right now, so take your time and you will get it back up and running with no problems.
idtheftvictim said:
The solution that was posted should work, but you need to use RSD Lite in order to flash the factory image, not fastboot.
Read it over nice and slow again, because you are in panic mode right now, so take your time and you will get it back up and running with no problems.
Click to expand...
Click to collapse
I think you are 100% right. I am in panic mode, thanks. I'll do it again following every step. I'll let you know.
sotnasnauj said:
I already tried this solution, I think mine is a little different. At the end of the post it says to enter fastboot and restore with a factory image. I can't because I am not unlocked. In order to unlock my device I have to go to Developer Settings (it is the message when I use the OEM unlock command). but I can't access to Android. I am stuck in the bootloader but can run fastboot commands.
Click to expand...
Click to collapse
You should be OK. People in that thread have reported success flashing the new factory image while locked. Check the last few pages of the thread.
toknitup420 said:
You should be OK. People in that thread have reported success flashing the new factory image while locked. Check the last few pages of the thread.
Click to expand...
Click to collapse
Thanks! I've been reading a lot from this thread but I get something unusual as the other people are experiencing. When I try to flash partition gpt.bin I get (bootloader) Unlock before flashin.
It is kind of contradictory as this fix supposedly fixes flashing without unlocking. I don't know if it is a problem of drivers. My PC sees my N6 as Google Nexus Bootlader Interface. In the thread, the PC sees the device as "Bulk" or "Qualcomm ....... etc etc".
My panic mode isn't turning off. I may be missing something.
sotnasnauj said:
Thanks! I've been reading a lot from this thread but I get something unusual as the other people are experiencing. When I try to flash partition gpt.bin I get (bootloader) Unlock before flashin.
It is kind of contradictory as this fix supposedly fixes flashing without unlocking. I don't know if it is a problem of drivers. My PC sees my N6 as Google Nexus Bootlader Interface. In the thread, the PC sees the device as "Bulk" or "Qualcomm ....... etc etc".
My panic mode isn't turning off. I may be missing something.
Click to expand...
Click to collapse
Did utry fastboot devices to see your device is connected...then fastboot oem unlock?
Also, I'm the one who has found a fix for the bricked issues when it comes to locking and unlocking the boot loader...in boot loader...when u go to recovery....what happens?
Yes, my device is connected. I've tried everything. I've been reading the last thread and posted what is happening to me, this is the URL of my posts.
http://forum.xda-developers.com/showthread.php?p=59659030
I can't go to recovery, I return to the BL.
idtheftvictim said:
The solution that was posted should work, but you need to use RSD Lite in order to flash the factory image, not fastboot.
Read it over nice and slow again, because you are in panic mode right now, so take your time and you will get it back up and running with no problems.
Click to expand...
Click to collapse
Now I've tried everything in that thread, when I was reading I thought flashing gpt.bin would be the solution but I can't do it, I can't flash it.. It says "Unlock before flashing". Supposedly flashing gpt.bin would allow me to flash without unlocking.
My last resource is trying this on a mac, I've read you don't need drivers so maybe it is a driver thing. I HOPE SO..
Can't access adb with my pc.
You don't need adb.
sotnasnauj said:
Yes, my device is connected. I've tried everything. I've been reading the last thread and posted what is happening to me, this is the URL of my posts.
http://forum.xda-developers.com/showthread.php?p=59659030
I can't go to recovery, I return to the BL.
Click to expand...
Click to collapse
Download factory images...extract them....pull the stick recovery and use the command fastboot flash recovery recovery.IMG
Also...did ubuse fastboot OEM unlock?
jamescable said:
Download factory images...extract them....pull the stick recovery and use the command fastboot flash recovery recovery.IMG
Also...did ubuse fastboot OEM unlock?
Click to expand...
Click to collapse
Yes, I used it but it tells me I need to go to Developer Settings and Allow OEM Unlock which I cant because cant access Android.
I can't flash anything as I am OEM Locked
sotnasnauj said:
Yes, I used it but it tells me I need to go to Developer Settings and Allow OEM Unlock which I cant because cant access Android.
I can't flash anything as I am OEM Locked
Click to expand...
Click to collapse
I think you should lock this thread. Following advice from different people in different threads is a really BAD idea.
rootSU said:
I think you should lock this thread. Following advice from different people in different threads is a really BAD idea.
Click to expand...
Click to collapse
I agree because op is somehow confused.....fastboot has nothing to do with develope settings USB enabled
Yes it does. He flashed the factory images, then relocked (which defaults to disabled oem unlocking). But something failed (guessing possibly userdata failed). I would recommend fastboot formats userdata to perform a factory reset from the boot loader to see if you can get android to boot.
Sent from my Nexus 6
hlxanthus said:
Yes it does. He flashed the factory images, then relocked (which defaults to disabled oem unlocking). But something failed (guessing possibly userdata failed). I would recommend fastboot formats userdata to perform a factory reset from the boot loader to see if you can get android to boot.
Sent from my Nexus 6
Click to expand...
Click to collapse
Yes.
Running
Code:
fastboot format cache
fastboot format userdata
Make sure it's FORMAT not erase.
Then walk away, watch some T.V. and don't check it for a while. (Panic mode will make it seem forever, trust me! I did the same thing as you!)
Hi everyone,
Was running cm12.1 happily then put a different kernel which caused a boot loop so I thought I'd reflash the cm12.1 zip but must have been an older zip which tried to downgrade the bootloader because after that it wouldn't turn on or even get into bootloader or recovery mode.
Managed to get fastboot up and running using this guide: http://forum.xda-developers.com/nexus-6/general/fix-fix-qhusbbulk-cm12-t3059518
However now I think I'm officially screwed because I didn't check "allow OEM unlock" in developer options so I cannot successfully flash any partition and "oem unlock" command does not work obviously.
The only hope I can see is if I somehow circumvent that and unlock the bootloader from fastboot using a specific motorola code?
Just want to know if there is any chance of a fix? Can you pay motorola to fix this stuff at all?
Thanks
dazman22 said:
Hi everyone,
Was running cm12.1 happily then put a different kernel which caused a boot loop so I thought I'd reflash the cm12.1 zip but must have been an older zip which tried to downgrade the bootloader because after that it wouldn't turn on or even get into bootloader or recovery mode.
Managed to get fastboot up and running using this guide: http://forum.xda-developers.com/nexus-6/general/fix-fix-qhusbbulk-cm12-t3059518
However now I think I'm officially screwed because I didn't check "allow OEM unlock" in developer options so I cannot successfully flash any partition and "oem unlock" command does not work obviously.
The only hope I can see is if I somehow circumvent that and unlock the bootloader from fastboot using a specific motorola code?
Just want to know if there is any chance of a fix? Can you pay motorola to fix this stuff at all?
Thanks
Click to expand...
Click to collapse
Contact Motorola and request an RMA.
Note: THIS IS NOT A SOLUTION TO BYPASS FRP!
I am not responsible if you are dumb dumb and break your phone
This Solution is written in under 10 minutes AND WORKS ONLY AND ONLY FOR STOCK people with no experience stay away
This is not a comprehensive solution, if you don't know what you're doing then don't do it!
This solution might work for all huawei phones where:
1. The Oem-unlock is greyed out and NOT activated in Developer Options
2 .Bootloader is unlocked & FRP is locked.
3. You are on !!! STOCK !!!
Problem case:
Huawei P9 lite VNS-L31 on B380
Bootloader unlocked.
FRP Locked.
Fastboot commands fail with
Code:
FAILED (remote: Command not allowed)
except
Code:
fastboot oem get-bootinfo
and
Code:
fastboot devices
Solution:
Have ready your Unlock bootloader code from Huawei
Factory Reset your device. (Factory Reset implies removing Fingerprints and standard Factory Reset)
Reboot to fastboot ,in fastboot you should see:
Phone: unlocked
FRP: locked
Re-lock your bootloader and factory reset ( it will do it automatically)
Code:
fastboot oem relock *Here Huawei Code*
Reboot normally, skip everything
Activate Developer Options
Activate OEM unlocking from Dev Options
Reboot fastboot, now you should see:
Phone: locked
FRP: unlocked
Unlock bootloader again, it will factory reset again
Code:
fastboot oem unlock *Here Huawei Code*
Skip everything again
Reboot again to fastboot and flash recovery, now you will see:
Phone: unlocked
FRP: unlocked
Code:
fastboot flash recovery *imagename*
The OEM Unlock option now is greyed out and ACTIVE
Sucess!After a few hours of debugging and searching for answers I finally managed to flash TWRP, hope this helps.
Alexander33 said:
Note: THIS IS NOT A SOLUTION TO BYPASS FRP!
I am not responsible if you are dumb dumb and break your phone
This Solution is written in under 10 minutes, although I think I've covered everything, people with no experience stay away, this is not a comprehensive solution, if you don't know what you're doing then don't do it.
This solution might work for all huawei phones where:
1. The Oem-unlock is greyed out and NOT activated in Developer Options
2 .Bootloader is unlocked & FRP is locked
Problem case:
Huawei P9 lite VNS-L31 on B380
Bootloader unlocked.
FRP Locked.
Fastboot commands fail with except andfastboot devices
Solution:
Have ready your Unlock bootloader code from Huawei
Factory Reset your device.
Reboot to fastboot ,in fastboot you should see:
Phone: unlocked
FRP: locked
Re-lock your bootloader and factory reset ( it will do it automatically)
Solution:
Have ready your Unlock bootloader code from Huawei
Factory Reset your device.
Reboot to fastboot ,in fastboot you should see:
Phone: unlocked
FRP: locked
Re-lock your bootloader and factory reset ( it will do it automatically)
fastboot oem relock *Here Huawei Code*
Reboot normally, skip everything
Activate Developer Options
Activate OEM unlocking from Dev Options
Reboot fastboot, now you should see:
Phone: locked
FRP: unlocked
Unlock bootloader again, it will factory reset again
Skip everything again
Reboot again to fastboot and flash recovery, now you will see:
Phone: unlocked
FRP: unlocked
The OEM Unlock option now is greyed out and ACTIVE
Sucess!
After a few hours of debugging and searching for answers I finally managed to flash TWRP, hope this helps.
Click to expand...
Click to collapse
Can i have your permission to add this guide to the unified help thread (FAQ post> "error: command not allowed") in this subforum. I will credit you by mention ofc.
fu**ing great, if I try to relock its says stat not match!!!!! Anyone ?
title
Alexander33 said:
Note: THIS IS NOT A SOLUTION TO BYPASS FRP!
I am not responsible if you are dumb dumb and break your phone
This Solution is written in under 10 minutes, although I think I've covered everything, people with no experience stay away, this is not a comprehensive solution, if you don't know what you're doing then don't do it.
This solution might work for all huawei phones where:
1. The Oem-unlock is greyed out and NOT activated in Developer Options
2 .Bootloader is unlocked & FRP is locked
Problem case:
Huawei P9 lite VNS-L31 on B380
Bootloader unlocked.
FRP Locked.
Fastboot commands fail with
Code:
FAILED (remote: Command not allowed)
except
Code:
fastboot oem get-bootinfo
and
Code:
fastboot devices
Solution:
Have ready your Unlock bootloader code from Huawei
Factory Reset your device.
Reboot to fastboot ,in fastboot you should see:
Phone: unlocked
FRP: locked
Re-lock your bootloader and factory reset ( it will do it automatically)
Code:
fastboot oem relock *Here Huawei Code*
Reboot normally, skip everything
Activate Developer Options
Activate OEM unlocking from Dev Options
Reboot fastboot, now you should see:
Phone: locked
FRP: unlocked
Unlock bootloader again, it will factory reset again
Code:
fastboot oem unlock *Here Huawei Code*
Skip everything again
Reboot again to fastboot and flash recovery, now you will see:
Phone: unlocked
FRP: unlocked
Code:
fastboot flash recovery *imagename*
The OEM Unlock option now is greyed out and ACTIVE
Sucess!After a few hours of debugging and searching for answers I finally managed to flash TWRP, hope this helps.
Click to expand...
Click to collapse
i have situation:
Phone : Relocked
FRP: Lock
any idea? im stuck in Bootloader.
Thank you very much! I spent many hours looking for a solution to this problem!
Your solution is incredible! Can I share your steps in Spanish for more people? I live in Mexico and I know more people with this problem. And of course I give you the credits for this magnificent solution. I'm sorry for my English, I know I write badly in this language
I have strange problem... I have "Phone unlocked, frp lock". But on my P9 Lite only fastboot mode works.
Rrecovery mode (vol+ i power) or download mode (vol+, vol-, power) are not responding - phone reboots always to Huawei logo.
Any way to fix that?
My phone its f***
What i do
Honor 7x
skiswim said:
i have situation:
Phone : Relocked
FRP: Lock
any idea? im stuck in Bootloader.
Click to expand...
Click to collapse
Me too
Any idea?
tootysa said:
Me too
Any idea?
Click to expand...
Click to collapse
I have a solution for you both.
I mistakenly followed the instructions above but made the mistake of not skipping everything. I got the message "Data partition corrupted do you want to format the partition" or something similar, DO NOT FORMAT ANYTHING, it should boot up normaly. I'm a bit rusty in my rooting ways u_u
Now, I got exactly the same situation as you both "Relocked" and "FRP Locked". I was able to get into the eRecovery and this is way to restore your phone.
1.- You need to get the Huawei Firmware Finder (Team MT) (https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146)
2.- Unzip it and run FirmwareFinderRewrite.exe
3.- Go to the tab that says Common Base
4.- Search for the update that you know it works in my case was VNS-L31C432B388 (I tried to use VNS-L31C432B404 but its still "not active" whatever that means). Look for the FullOTA and copy the change log address (in my case: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1258/g104/v91282/f1/full/changelog.xml)
5.- In the icons above the Tabs pres on the cloud with a page infront, the tooltip should say Proxy
6.- Copy the changelog addres in the section Firmware for install and press Set.
7.- Press Register for Update
8.- Follow the instructions bellow this (Change your DNS temporarily)
9.- In your phone go to the eRecovery.
10.- Connect to WLAN and it should find a package.
10a.- In case it doesn't find it, go back to step 4. You probably got 2 packages with the same name. I do not enterily understand the differences but I assume one is for one region and the other for other region.
11.- Wait until it restores and be happy.
If you can not change the DNS in you router, as it was my case. You can set a hotspot with your laptop/desktop and change the DNS there but you still need and active internet conection.
I connected my cellphone to my laptop via WLAN and my laptop to the router via Ethernet which provides internet. I change both DNS's for both connections.
skiswim said:
i have situation:
Phone : Relocked
FRP: Lock
any idea? im stuck in Bootloader.
Click to expand...
Click to collapse
tootysa said:
My phone its f***
What i do
Honor 7x
Click to expand...
Click to collapse
tootysa said:
Me too
Any idea?
Click to expand...
Click to collapse
Did you guys unlock your bootloader prior to having this situation? aka did you start with
Phone unlocked.
FRP locked.
My solution is for this situation ^ and this situation only, not for any other case.
One other thing it springs right now in my mind is, did you factory reset and delete the fingerprints ? As this might be related...
Kucharskov said:
I have strange problem... I have "Phone unlocked, frp lock". But on my P9 Lite only fastboot mode works.
Rrecovery mode (vol+ i power) or download mode (vol+, vol-, power) are not responding - phone reboots always to Huawei logo.
Any way to fix that?
Click to expand...
Click to collapse
That's called a soft brick and have you tried eRecovery?
You need to go back to stock using a stock firmware which you have to find on the internet, then make a folder on your SDCard called DLOAD and put it in there, then press all three buttons and the eRecovery should boot up and detect the stock firmware.
EDIT: The guys that got stuck didn't read the part where I said VNS-L31 On B380 and did this having a custom ROM. How I know this? I've also followed my own guide and in the moment you relock your bootloader you will NOT be able to boot into your ROM anymore and you will boot to e-recovery
(which doesn't give too many options), if you were on Nougat or even on Marshmallow (skip the rollback part? )follow the rollback tutorial from N to MM from this Forum Section to get back to stock C432B160/1 , if you can't find the link just PM me
Again, I have VNS-L31 and I'm talking only from what I did, I don't know anything about your device
Man it's not working for me to relock the bootloader. its the same result. what can i do?
really need your help sir
Alexander33 said:
Note: THIS IS NOT A SOLUTION TO BYPASS FRP!
I am not responsible if you are dumb dumb and break your phone
This Solution is written in under 10 minutes AND WORKS ONLY AND ONLY FOR STOCK people with no experience stay away
This is not a comprehensive solution, if you don't know what you're doing then don't do it!
This solution might work for all huawei phones where:
1. The Oem-unlock is greyed out and NOT activated in Developer Options
2 .Bootloader is unlocked & FRP is locked.
3. You are on !!! STOCK !!!
Problem case:
Huawei P9 lite VNS-L31 on B380
Bootloader unlocked.
FRP Locked.
Fastboot commands fail with
Code:
FAILED (remote: Command not allowed)
except
Code:
fastboot oem get-bootinfo
and
Code:
fastboot devices
Solution:
Have ready your Unlock bootloader code from Huawei
Factory Reset your device. (Factory Reset implies removing Fingerprints and standard Factory Reset)
Reboot to fastboot ,in fastboot you should see:
Phone: unlocked
FRP: locked
Re-lock your bootloader and factory reset ( it will do it automatically)
Code:
fastboot oem relock *Here Huawei Code*
Reboot normally, skip everything
Activate Developer Options
Activate OEM unlocking from Dev Options
Reboot fastboot, now you should see:
Phone: locked
FRP: unlocked
Unlock bootloader again, it will factory reset again
Code:
fastboot oem unlock *Here Huawei Code*
Skip everything again
Reboot again to fastboot and flash recovery, now you will see:
Phone: unlocked
FRP: unlocked
Code:
fastboot flash recovery *imagename*
The OEM Unlock option now is greyed out and ACTIVE
Sucess!After a few hours of debugging and searching for answers I finally managed to flash TWRP, hope this helps.
Click to expand...
Click to collapse
Sir please help me , I need step by step tutorial from you please I need your facebook account name and I will pm you.
I'm on stock ROM and already do factory reset. But the bootloader still unlocked. When I'm trying to lock, its failed. Can someone help me?
my phone seems to be stuck at emui circled been about 5mins like that
honor 9 lite
Alexander33 said:
Did you guys unlock your bootloader prior to having this situation? aka did you start with
Phone unlocked.
FRP locked.
My solution is for this situation ^ and this situation only, not for any other case.
One other thing it springs right now in my mind is, did you factory reset and delete the fingerprints ? As this might be related...
That's called a soft brick and have you tried eRecovery?
You need to go back to stock using a stock firmware which you have to find on the internet, then make a folder on your SDCard called DLOAD and put it in there, then press all three buttons and the eRecovery should boot up and detect the stock firmware.
EDIT: The guys that got stuck didn't read the part where I said VNS-L31 On B380 and did this having a custom ROM. How I know this? I've also followed my own guide and in the moment you relock your bootloader you will NOT be able to boot into your ROM anymore and you will boot to e-recovery
(which doesn't give too many options), if you were on Nougat or even on Marshmallow (skip the rollback part? )follow the rollback tutorial from N to MM from this Forum Section to get back to stock C432B160/1 , if you can't find the link just PM me
Again, I have VNS-L31 and I'm talking only from what I did, I don't know anything about your device
Click to expand...
Click to collapse
If you have this situation : phone Relocked --> its mean that the phone has been unlocked before and then relocked
If you have this situation : phone locked --> its mean that the phone has never been unlocked before
it's a security from huawei to know if the phone still have a warranty
I have the same situation : phone relocked and frp lock (P20 lite with ANE-LX1 C652 )
because i relocked the bootloader without leaving the frp unlocked.
When you relock the bootloader ( relock phone) the phone will do an automatic factory reset, and if he fail with, you can't unlock bootloader again because of the frp lock, and you can not unlock frp from developper option because the phone won't start.
I tried the Firmware Finder solution to get erecovery working with DNS, i found an update for (ANE-LX1 C652 not FullOTA) and i register it for download, the phone start downloading, after finish downloading i get a fail install error.
i tried register many version C432 C185 ..... but the erecovery is not reconizing them i think that i need a FullOTA for my ANE-LX1 C652.
Installing update with sdcard dload, always fail .
re
Hello dear,
so i have unlocked my phone and this was the beginning of the problems, I had to deal with samsung phones before but the huawei was very sensitive, so i got into a problem and broke the phone system, which had taken the phone to an expert and had restored the stock phone system n it was good to roll back ,phone to work at least, he tells me that he did relock the bootloader but the message of warning still appears everytime i booted up ,
now ive the same problem as u have, and i noticed that the adb commands works only when the phone is on system ,either when i enter the FASTBOOT MODE ,ADB commands do not work anymore ,even the gray OEM unlocking,, and now i do not know if this solution works with me or not ,if i can get rid the warning message?? i dont need that silly unlocking anymore
ِِCan u advise me PLEASE !!!!
markraiem said:
Hello dear,
so i have unlocked my phone and this was the beginning of the problems, I had to deal with samsung phones before but the huawei was very sensitive, so i got into a problem and broke the phone system, which had taken the phone to an expert and had restored the stock phone system n it was good to roll back ,phone to work at least, he tells me that he did relock the bootloader but the message of warning still appears everytime i booted up ,
now ive the same problem as u have, and i noticed that the adb commands works only when the phone is on system ,either when i enter the FASTBOOT MODE ,ADB commands do not work anymore ,even the gray OEM unlocking,, and now i do not know if this solution works with me or not ,if i can get rid the warning message?? i dont need that silly unlocking anymore
ِِCan u advise me PLEASE !!!!
Click to expand...
Click to collapse
The warning will always appear as long as the Bootloader is unlocked. read the first 3 conditions . If you are on stock and can boot on stock, delete fingerprints and any PINs and Google accounts, then Factory Reset and this should set you to FPR Unlocked, BL Unlocked. Here just lock the bootloader back and then reboot normally and use the device as you normally do, the moment you add your Google Account and/or Fingerprint the FRP will lock back. If you want to continue flashing custom ROMs etc. follow the tutorial but read all the comments (relevant ones) before you do it.
This solution might work for all huawei phones where:
1. The Oem-unlock is greyed out and NOT activated in Settings -> Developer Options
2 .Bootloader is unlocked & FRP is locked.
3. You are on !!! STOCK !!!
Click to expand...
Click to collapse
if that applies to you, you can try my tutorial, otherwise I have no other suggestion for you, I quit tampering with my Huawei long ago, stock is quite fine for me.
I don't have the code, how do i lock and unlock bootloader? thx
to me puts
PHONE Locked
FRP Lock
phone stuck on recovery mode
I was trying to install Camera2 on it. Unlocked it with developer options ->Unlock OEM
After try some things I reset factory the cellphone and decide to forget camera2 things...
So I went to developer options and LOCKED OEM.
After that I reboot in fastboot mode and did fastboot oem lock
Now the cellphone is locked in a bootloop saying that my deveice loaded a differente operational system and a screen to visit miui.com/unlock.
The unlock aplication doesn't work. Says that I can't unlock the device.
So that means I lost my crazy brand new phone? THere's any solution? The Test Point solution will work? Is that the only solution???
Thiank you for any response.
foxdanger said:
I was trying to install Camera2 on it. Unlocked it with developer options ->Unlock OEM
After try some things I reset factory the cellphone and decide to forget camera2 things...
So I went to developer options and LOCKED OEM.
After that I reboot in fastboot mode and did fastboot oem lock
Now the cellphone is locked in a bootloop saying that my deveice loaded a differente operational system and a screen to visit miui.com/unlock.
The unlock aplication doesn't work. Says that I can't unlock the device.
So that means I lost my crazy brand new phone? THere's any solution? The Test Point solution will work? Is that the only solution???
Thiank you for any response.
Click to expand...
Click to collapse
"So I went to developer option and LOCKED OEM" can you be a little more clear. Because unlocking the bootloader locks the OEM unlock option in the developer settings.
Possible cause of your bootloop is the change in your build.prop file.
I did a similar mistake as well. My phone was stuck in a bootloop. My mistake was that I installed Magisk and forgot to uninstall it through the Magisk manager before locking the bootloader and so the system were not in their stock state.
What I did was, I just booted my phone into fastboot.
Unlocked the bootloader again by using "fastboot OEM unlock". Went into fastboot again. Checked the current active slot by "fastboot getvar current-slot" and flashed the stock boot image from the stock pie rom found on Mi website.
Njaiker said:
"So I went to developer option and LOCKED OEM" can you be a little more clear. Because unlocking the bootloader locks the OEM unlock option in the developer settings.
Possible cause of your bootloop is the change in your build.prop file.
I did a similar mistake as well. My phone was stuck in a bootloop. My mistake was that I installed Magisk and forgot to uninstall it through the Magisk manager before locking the bootloader and so the system were not in their stock state.
What I did was, I just booted my phone into fastboot.
Unlocked the bootloader again by using "fastboot OEM unlock". Went into fastboot again. Checked the current active slot by "fastboot getvar current-slot" and flashed the stock boot image from the stock pie rom found on Mi website.
Click to expand...
Click to collapse
What I did was with the phone working I entered on configuration, developer, and turned of the oem lock option.
Than I reboot in fastboot and did fastboot oem lock.
This made the cellphone unbootable. Bootloop saying that I'm trying to start a different operational system.
And I can't make fastboot unlock because I turned off the option in the system, so I can't send fastboot commands like oem edl, unlock, unlock-critical and etc...
I can't do nothing :/
I don't know how the option was working, but was... I know it should be locked, but this time wasn't. Was after I factory reset the cellphone
Your fault that you locked bootloader on a modified system. Do a research next time
Hi guys,
Accidentally, im locked the bootloader of my moto z3 play and i cant boot because a previous bad installation that results in a bootloop.
I cant unlock from fastboot because the acctual system is new but unbootable (usb debugging and oem unlock disable by default...
I saw that there is some toolkits for many brands and models to fix this...
Will there be any for moto z3 play? or any other way to fix this brick?
I can access fastboot and stock recovery... Can i flash anything from adb sideload?
ty in advance
sprays said:
Hi guys,
Accidentally, im locked the bootloader of my moto z3 play and i cant boot because a previous bad installation that results in a bootloop.
I cant unlock from fastboot because the acctual system is new but unbootable (usb debugging and oem unlock disable by default...
I saw that there is some toolkits for many brands and models to fix this...
Will there be any for moto z3 play? or any other way to fix this brick?
I can access fastboot and stock recovery... Can i flash anything from adb sideload?
ty in advance
Click to expand...
Click to collapse
You should be able to reflash the firmware
Use
Code:
fastboot getvar all
To get the codename and software channel
https://mirrors.lolinet.com/firmware/moto
More in my
Motorola Flashing Guide
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my mata using XDA Labs
sd_shadow said:
You should be able to reflash the firmware
Use
Code:
fastboot getvar all
To get the codename and software channel
https://mirrors.lolinet.com/firmware/moto
More in my
Motorola Flashing Guide
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my mata using XDA Labs
Click to expand...
Click to collapse
I forgot to say that i ran by mistake flashing lock command, in way that oem is lock AND flashing too.
I have tried many times flash stock 9.0 firmware, but most part of lines out are permission denied (cause of flashing locked, i guess...)
After try flash, i get only bootloop and stock recovery.
I even already try apply update from adb sideloa to twrp or cwm but doesnt work (((
Plus, i try TOO boot on edl mode to use blank flash but doenst work, going to fastboot reason qcom boot failed ! ((((((((
I suppose can reflash the firmware with flashing locked? I have tried one of these beckham 9.0... I confess that not tried all of them.
Ty, man, for help!
sprays said:
You should be able to reflash the firmware
Use
I forgot to say that i ran by mistake flashing lock command, in way that oem is lock AND flashing too.
I have tried many times flash stock 9.0 firmware, but most part of lines out are permission denied (cause of flashing locked, i guess...)
After try flash, i get only bootloop and stock recovery.
I even already try apply update from adb sideloa to twrp or cwm but doesnt work (((
Plus, i try TOO boot on edl mode to use blank flash but doenst work, going to fastboot reason qcom boot failed ! ((((((((
I suppose can reflash the firmware with flashing locked? I have tried one of these beckham 9.0... I confess that not tried all of them.
Ty, man, for help!
Click to expand...
Click to collapse
have you tried unlocking your bootloader again?
sd_shadow said:
You should be able to reflash the firmware
Use
Code:
fastboot getvar all
To get the codename and software channel
https://mirrors.lolinet.com/firmware/moto
More in my
Motorola Flashing Guide
https://forum.xda-developers.com/general/rooting-roms/guide-flashing-motorola-firmware-t4042039
Sent from my mata using XDA Labs
Click to expand...
Click to collapse
kewlzter said:
have you tried unlocking your bootloader again?
Click to expand...
Click to collapse
Yeah... But an actual rom doesnt have oem unlock neither usb debbuging actives...
sprays said:
You should be able to reflash the firmware
Use
Yeah... But an actual rom doesnt have oem unlock neither usb debbuging actives...
Click to expand...
Click to collapse
Unlocking your Bootloader, you know where you enter that long code from the email that Motorola sent you.
I say this because sometimes people think, unlocking in the Dev-options, is actually unlocking the BL, when it's not.
Nor is a carrier unlock the same thing.
Your bootloader sounds locked from your Description of "access denied" errors.
I just want you to clearify that you are actually unlocked.
kewlzter said:
Unlocking your Bootloader, you know where you enter that long code from the email that Motorola sent you.
I say this because sometimes people think, unlocking in the Dev-options, is actually unlocking the BL, when it's not.
Nor is a carrier unlock the same thing.
Your bootloader sounds locked from your Description of "access denied" errors.
I just want you to clearify that you are actually unlocked.
Click to expand...
Click to collapse
Yeah, i have the code from motorola and i try unlock with "fastboot oem unlock code", but:
(bootloader) Check 'OEM unlocking' in Android Settings > Developer
But, as i said, i cant boot o.s. to active oem unlocking.
sprays said:
Yeah, i have the code from motorola and i try unlock with "fastboot oem unlock code", but:
(bootloader) Check 'OEM unlocking' in Android Settings > Developer
But, as i said, i cant boot o.s. to active oem unlocking.
Click to expand...
Click to collapse
Although you're on Z3, this problem is generic. Ask in the Z2 forum, as they are more active. I also think the G-series (or other popular Moto phones) forums could help you with this.
Can you get to the recovery menu, and wipe factory reset (BL->recovery, up+pwr, Wipe/Factory restore)?
?
kewlzter said:
Although you're on Z3, this problem is generic. Ask in the Z2 forum, as they are more active. I also think the G-series (or other popular Moto phones) forums could help you with this.
Can you get to the recovery menu, and wipe factory reset (BL->recovery, up+pwr, Wipe/Factory restore)?
Click to expand...
Click to collapse
Ty for the advice... I will do that.
Yea, i can wipe data/factory reset, but its the same. Bootloop until stuck to "fastboot reason: fall-through from normal boot mode."
I've read about this scenario for months on several different model forums and I imagine my best chance is to use the blankflash in edl mode but i can't boot into edl mode. Wherever I connect it is always recognized as a Motorola PCS or Motorola ADB device. I'm thinking of buying the deep flash cable and see if it works ...
$ fastboot getvar current-slot
//Getting and setting the slot should not cause any harm, but you never know.
$ fastboot --set-active=<a/b - whichever "current-slot" isn't.>
$ fastboot reboot
EDIT0:
In addition, you should plan ahead if you do get in. Like doing everything it takes to allow you to unlock/flash (adb).
You don't want to miss anything critical and screw up that other slot too.
Moto z3 play
I have the exact same prob.... Did you ever find a fix for this?? I have tried about everything with no luck....
Hazardous2u said:
Moto z3 play
I have the exact same prob.... Did you ever find a fix for this?? I have tried about everything with no luck....
Click to expand...
Click to collapse
Aún no hay solución
To everyone who is having this problem, just run the command multiple times in a row and it works! I don't know why, but just running it a few times in a row (I had to do like 9 times) gave me the unlock code.
Same thing for applying the code after getting it from Moto. Had to do it like 9 times in a row again, but it worked.