Before the 8.1 update to my A1/Fi phone, the locked phone would display the time when moved. Now, I have to unlock screen fully, unless I activate Approach to Wake Up. I am hesitant to leave this enabled.
Is there a setting that will activate the display when the phone moves like before? It was great to be able to pull the phone out of my pocket, and see the time.
jhedfors said:
Before the 8.1 update to my A1/Fi phone, the locked phone would display the time when moved. Now, I have to unlock screen fully, unless I activate Approach to Wake Up. I am hesitant to leave this enabled.
Is there a setting that will activate the display when the phone moves like before? It was great to be able to pull the phone out of my pocket, and see the time.
Click to expand...
Click to collapse
NVM. I figured it out. Could have sworn I tried this before, but Moto Display "on", with Approach "off", did the job.
Related
I'm not sure if it's just me... but I noticed the active display on my moto x (t-mo) is not active all the time. The good example is.. when the phone display is off (asleep) and you pick up the phone or move the phone, it is supposed to display the time and that pad lock - so you don't have press the lock key to get the time.
On my phone, that works for the most part... but after a while (and I can't figure out what is the trigger/cause), the active display would stop working. When that happens and phone display is off... i pick up/move the phone... screen is still blank. I now need to press the lock button on the side to bring up the unlock screen.
I did find that rebooting the phone will fix this. So, i want to see if anyone else is seeing this behavior, or if I should see about getting moto to fix/replace it - since I just received the phone yesterday.
lithium133 said:
I'm not sure if it's just me... but I noticed the active display on my moto x (t-mo) is not active all the time. The good example is.. when the phone display is off (asleep) and you pick up the phone or move the phone, it is supposed to display the time and that pad lock - so you don't have press the lock key to get the time.
On my phone, that works for the most part... but after a while (and I can't figure out what is the trigger/cause), the active display would stop working. When that happens and phone display is off... i pick up/move the phone... screen is still blank. I now need to press the lock button on the side to bring up the unlock screen.
I did find that rebooting the phone will fix this. So, i want to see if anyone else is seeing this behavior, or if I should see about getting moto to fix/replace it - since I just received the phone yesterday.
Click to expand...
Click to collapse
Do you have a screen protector?
after asking on the moto support site.. the issue may be related to one of the apps. So, I unselected all but the messaging/mail apps, rebooted and things seem to be back to normal now. Make sure you uncheck the box that automatically adds the app to active display and pare it down to the essential apps that really need/use active display.
So I have active display on and no other options checked to keep my screen on for any reason yet whenever I receive a notification (only while on charge does this occur) my lock screen shows up instead of active display and it doesn't shut itself off. This doesn't seem like that big of an issue until I wake up and my phone is 125°F. Any remedies for this?
thelogman said:
So I have active display on and no other options checked to keep my screen on for any reason yet whenever I receive a notification (only while on charge does this occur) my lock screen shows up instead of active display and it doesn't shut itself off. This doesn't seem like that big of an issue until I wake up and my phone is 125°F. Any remedies for this?
Click to expand...
Click to collapse
Sounds like maybe you should consider a factory reset, and if that doesn't fix the issue, a full SBF back to stock.
I cannot think of any setting that would cause this, unless you want to provide more details on what if any modifications you have made. Let us know what you do/decide...
Is it possible you have "Stay awake while charging" enabled in Developer settings?
I'm on 4.4.2 rooted with jcases pie exploit only thing I have done is gravity box. I double checked to make sure and I didn't have the screen always on activated.
Sent from my XT1058 using XDA Free mobile app
So for example, normally, you have active display turn on automatically showing you just the notifications (still need to slide to unlock/wake screen) by vibration (assuming also light is detected ie not in pocket).
Is there a mod that I can add or an option where I can have this 'on vibration' open the screen immediately and not just on active display?
So something like what it's doing now by skipping the active display screen directly and just waking the screen and go straight to the phone.
And of course I have no password on my lockscreen
Does that kinda make sense? Is there something like this out there or a setting somewhere?
I have rooted, unlocked bootloader XT1053 with xposed and gravity box.
Sounds like a dead battery waiting to happen to me. If I bump my desk wrong at work and my phone isn't face down, active display lights up. It can do this several times in the period of 10 minutes, in essence leaving the screen on permanently.
1dtms said:
So for example, normally, you have active display turn on automatically showing you just the notifications (still need to slide to unlock/wake screen) by vibration (assuming also light is detected ie not in pocket).
Is there a mod that I can add or an option where I can have this 'on vibration' open the screen immediately and not just on active display?
So something like what it's doing now by skipping the active display screen directly and just waking the screen and go straight to the phone.
And of course I have no password on my lockscreen
Does that kinda make sense? Is there something like this out there or a setting somewhere?
I have rooted, unlocked bootloader XT1053 with xposed and gravity box.
Click to expand...
Click to collapse
There is nothing like this currently available....and IMO, that is a terrible idea. The whole point of AD is to provide notifications while just barely sipping battery power. Assuming such a modification was made consider this one of MANY scenarios:
You have your phone in your car, it 'sees light', it feels vibrations and so it turns on the screen. Now, not only are you using full battery power to light the display, but unless you reach over and click it back of with the power button, it is going to stay on for whatever length of time you have the display timeout set to.
Just imagine how quickly this could kill your battery....
samwathegreat said:
There is nothing like this currently available....and IMO, that is a terrible idea. The whole point of AD is to provide notifications while just barely sipping battery power. Assuming such a modification was made consider this one of MANY scenarios:
You have your phone in your car, it 'sees light', it feels vibrations and so it turns on the screen. Now, not only are you using full battery power to light the display, but unless you reach over and click it back of with the power button, it is going to stay on for whatever length of time you have the display timeout set to.
Just imagine how quickly this could kill your battery....
Click to expand...
Click to collapse
well for those reasons I understand and would expect some toggle feature for when you want this and when you don't
1dtms said:
well for those reasons I understand and would expect some toggle feature for when you want this and when you don't
Click to expand...
Click to collapse
Could you elaborate on which situations you would like the screen to turn on like that based on notifications instead or active display?
Enviado desde mi XT1058 usando Tapatalk 2
Set your screen timeout to 30 minutes and use the power button to turn it off. Then also turn off the lock screen. About as good as you're going to get, and short of coding the modification yourself, probably the best you'll get too.
I said in another thread recently.... Active Display is what it is. There's no way to modify it in anyway.
This may have been answered elsewhere , but I am coming from an S4 and I was wondering why my Droid Turbo when I pick it flashes the lock screen.
I have moto display turned on for notifications and I like that, I do not have the the wave/hand proximity turned on.
The phone will slide in the car seat and the lock screen will come on I pick it up and it flashes on. Then it goes on and I keep moving it around it will then flash back on again. Or every time I take it out of my pocket it comes on.
I heard something about Moto screens breathing or something.
thanks!
joeunc said:
This may have been answered elsewhere , but I am coming from an S4 and I was wondering why my Droid Turbo when I pick it flashes the lock screen.
I have moto display turned on for notifications and I like that, I do not have the the wave/hand proximity turned on.
The phone will slide in the car seat and the lock screen will come on I pick it up and it flashes on. Then it goes on and I keep moving it around it will then flash back on again. Or every time I take it out of my pocket it comes on.
I heard something about Moto screens breathing or something.
thanks!
Click to expand...
Click to collapse
Moto Actions controls that. I actually like it because I can check the time just by waving my hand over the phone without having to hit a button. You could try disabling Moto Actions to see if that helps.
Ally Android said:
Moto Actions controls that. I actually like it because I can check the time just by waving my hand over the phone without having to hit a button. You could try disabling Moto Actions to see if that helps.
Click to expand...
Click to collapse
All the moto actions are disabled, I only have active display on to show notifications. The one where you wave to turn the screen on is not enabled
thx
joeunc said:
All the moto actions are disabled, I only have active display on to show notifications. The one where you wave to turn the screen on is not enabled
thx
Click to expand...
Click to collapse
Did you just turn off the settings or disable the app?
Ally Android said:
Did you just turn off the settings or disable the app?
Click to expand...
Click to collapse
Here is what I see happening, if you turn on Moto Display to flash notifications, each time I just pick the phone or move it the lock screen and time flahes.
If I turn off Moto Display, no notifications flash and when I move the phone no lockscreen, no nothing.
Should be a way to see the notifications flash in and out, but not react to just moving the phone by flashing lock screen
thx
There are two separate apps in play here. Moto Display and Moto Actions.
Moto Display is what you want to keep active so that it will show you on the lock screen when you get a message, etc.
Moto Actions is what happens when you move your hand towards the phone.
If you go into your apps settings and manually disable the Moto Actions app. It will prevent the phone from flashing the lock screen when it detects movement.
Ally Android said:
There are two separate apps in play here. Moto Display and Moto Actions.
Moto Display is what you want to keep active so that it will show you on the lock screen when you get a message, etc.
Moto Actions is what happens when you move your hand towards the phone.
If you go into your apps settings and manually disable the Moto Actions app. It will prevent the phone from flashing the lock screen when it detects movement.
Click to expand...
Click to collapse
I know,. all the Moto Actions are turned off, I only have Moto Display on and have chosen the apps I want to show.
Phone sits on the desk, for a few minutes screen black I reach over and pick it up lock screen comes on
I just restarted and no change
thanks
Do you have "Approach" turned off under moto actions? Cuz that's exactly what it sounds like you have turned on.
Sent from my XT1254 using XDA Free mobile app
Mine does the same thing it may be because the twist for camera is on? all other options are turned off (battery Saving)
Every time I move the phone the notification screen lights up but I noticed if you cover the proximity sensor on the top of phone it doesnt light up at all
Its part of the active display. It comes on when the phone is moved. I do wish there was a setting for it to only come on when you have a notification, but there isn't a setting for that that I know of. I know a lot of ppl like this "feature," but I do miss just the simple notification led.
i do not have approach or twist for camera on at all. I only have the notify on notifications.
phone sitting there , black screen just lift one side up and the screen comes on
Moto Actions/Moto Dispaly
Interesting thread because it illustrates the various preferences we all have in interacting with our phones. I think it's pretty neat that Moto developed these options despite the fact that I've turned off some of the features.
For example, I don't need it to sense my eyes, so I turned off that. I don't need it to turn on each time I wave my hand. It was turning on with shadows/sun/clouds while driving and anytime I'd move my arm. Don't like that.
What I do like is the intermittent notifications as well as the screen turning on if I move the phone. What we do with the notifications is pretty cool too. I like my Turbo Droid.
Cheers!
joeunc said:
i do not have approach or twist for camera on at all. I only have the notify on notifications.
phone sitting there , black screen just lift one side up and the screen comes on
Click to expand...
Click to collapse
Seems to be some confusion in here.
Moto Display uses two methods to turn on the screen. It uses the phone's accelerometer to tell if you move the device. If you move the device at all, Moto Display will turn on. Only way to stop this is to turn off Moto Display.
The other method uses the front IR sensors to detect if you wave your hand in front of the screen. This method can be turned off within Moto Actions.
The screen constantly flashing (especially in the car) is annoying, but it has almost no battery impact.
That's what I was looking for, so it's the accelerometer making it come on as I don't have the hand activation turned on, I just have the moto notifications in Moto display turned on
joshm.1219 said:
Seems to be some confusion in here.
Moto Display uses two methods to turn on the screen. It uses the phone's accelerometer to tell if you move the device. If you move the device at all, Moto Display will turn on. Only way to stop this is to turn off Moto Display.
The other method uses the front IR sensors to detect if you wave your hand in front of the screen. This method can be turned off within Moto Actions.
The screen constantly flashing (especially in the car) is annoying, but it has almost no battery impact.
Click to expand...
Click to collapse
Here is the right solution
Go to settings > App > In all app tab select these two app 1) Moto Display 2) Moto Action, now disable these both app and now the phone wont flash clock..
If you have RR Rom installed I think there is an option to turn on and off the hand wave and/or the "pick-up" sensing.
I found out how to stop the clock and battery circle when I move. You set it by just clicking the Moto app. And turn it off.
It's not done I'm settings. You have to open the app from the home screen.
Trust me, the thing blinking every time I moved when the screen was turned off was driving me nuts!
Anyone know if there's a way to disable the fingerprint scanner activating any time I pick up the phone now? Never did that before the update, it's pretty annoying. Already have lift to wake turned off, but that doesn't fix it. Went through every setting and didn't see a way to fix it. And it's not the lift to wake option, the whole screen doesn't turn on, just the fingerprint scanner and icon. Seems to be making my battery life way worse.
paulson64 said:
Anyone know if there's a way to disable the fingerprint scanner activating any time I pick up the phone now? Never did that before the update, it's pretty annoying. Already have lift to wake turned off, but that doesn't fix it. Went through every setting and didn't see a way to fix it. And it's not the lift to wake option, the whole screen doesn't turn on, just the fingerprint scanner and icon. Seems to be making my battery life way worse.
Click to expand...
Click to collapse
Because Blu cust support has not duplicated it, others with update didn't duplicate it.
Makes it seem like just your phone.
Did you try to factory reset it.
Fully. Remove saved fingerprint remove accounts,
Reboot to recovery and do factory reset. Setup phone again
paulson64 said:
Anyone know if there's a way to disable the fingerprint scanner activating any time I pick up the phone now? Never did that before the update, it's pretty annoying. Already have lift to wake turned off, but that doesn't fix it. Went through every setting and didn't see a way to fix it. And it's not the lift to wake option, the whole screen doesn't turn on, just the fingerprint scanner and icon. Seems to be making my battery life way worse.
Click to expand...
Click to collapse
Late reply I know but I found out how to disable this option.
In the settings go to:
Display->Ambient Display
Turn off the option for New Notifications.
I have no idea why it is called this as new notifications (SMS at least from my quick test) still wake the screen,but the fingerprint sensor no longer shows when you lift or move your phone. Completely mislabeled but hey at least you can turn it off.