Related
Iam using the Dell Streak 7 as a sat nav system in the car. Ive tried to charge it up on the usb car adapter but it seems to loose its charge over time, making the D7 unusable for the purpose of a sat nav. Am i doing something wrong or is there a special usb car adapter for the job?
Thanks, David.
Does it say it's charging when plugged in?
Depending on how powerful your charger is it's likely that it's draining faster then the charger can provide. At best on my s5 it's just barely faster then the charger and the s7 needs more power then that.
Thanks for peply, yes it states it is plugged in. I came to the same conclusion. Wonder if there are any other chargers that have more juice.
diddy64 said:
Thanks for peply, yes it states it is plugged in. I came to the same conclusion. Wonder if there are any other chargers that have more juice.
Click to expand...
Click to collapse
There are several that will do the job. Just look for specs that include putting out 5.5 volts and 2 amps. Several of the chargers that are made for the iPad2 will work. And you may want to install a lighter adapter that you can wire directly to the battery that will allow up to 2 or 3 amps from each port
Most standard USB ports do not put out enough power to charge the DS7. The best bet is to use a inverter that plugs into your cigarette lighter and then plug the charger into that, not just the USB cable.
http://www.amazon.com/Power-Inverter-Charger-Portable-SmartPhones/dp/B00144KS6W
I use this setup:
Bestek Adapter
Trans4m lighter adapter
The Bestek I have wired to the battery so I have no fuse problems with lighter, and with that I can charge either my iPad2 or my Streak7, IF I need to charge both, then I plug the Transform adapter into the Bestek and can then charge BOTH devices, the Ipad2 AND the Streak7 and a couple of other things if need be
Thank you guys, this gives me alot of hope. Once again you all get my thanks.
Cheers,
David.
Yea, like they previously stated not all chargers are created equal.
Unless it states it's a tablet/ipad charger you cant assume it's doing 2+ amps. Most phone/lower end ones can only do 500mA/1A.
Realistically you'd prob need at least 2 amps to get a net gain while using gps/anything demanding. But I dont know if it would even try and draw above that if given the chance. [email protected] is what the bundled wall charger does and can accept up to 5.5v (as it's still within the +/-10% tolerence of the usb spec, but just barely)
My fully charged stock S7 WiFi running 514 draws only 45-70mA. Maybe starting fully charged would help?
wptski said:
My fully charged stock S7 WiFi running 514 draws only 45-70mA. Maybe starting fully charged would help?
Click to expand...
Click to collapse
I don't know anything about how it works, but I imagine tablets are wired to know when they are receiving the correct amount of input. For instance, if you connect your Streak 7 to a powered USB hub that only puts out 5 volts, it won't charge nor will it charge when connect via usb to the PC, it has to be receiving 5.5 volts and 2 amps before it will let itself receive charge. I have an iPad that is the same way and have noticed all the tablets I have had my hands on are the same, Galaxy Tabs, Transformers, Xoom... all those have to receive higher numbers to charge. So you have to have a cigarrette lighter adapter that puts that out, if it's for a cell phone it won't do anything for it
cdzo72 said:
I don't know anything about how it works, but I imagine tablets are wired to know when they are receiving the correct amount of input. For instance, if you connect your Streak 7 to a powered USB hub that only puts out 5 volts, it won't charge nor will it charge when connect via usb to the PC, it has to be receiving 5.5 volts and 2 amps before it will let itself receive charge. I have an iPad that is the same way and have noticed all the tablets I have had my hands on are the same, Galaxy Tabs, Transformers, Xoom... all those have to receive higher numbers to charge. So you have to have a cigarrette lighter adapter that puts that out, if it's for a cell phone it won't do anything for it
Click to expand...
Click to collapse
The voltage is constant but current isn't. It won't know how much current is available unless it asks for it. It's like a 2A fuse, you can draw up to 2A, no more.
Even with a fully charged battery it'll show charging at 98% for a short time and that's when I saw the higher 70mA but I'm not sure if it's in the CC or CV part of a Li-Ion charge cycle but I'd guess CV because it's less than 100mA.
My bad thinking measuring AC input current instead of DC current since this thread is about USB power.
Used a cheap ReTrak USB extension cord that loses connections to seperate the wire to measure DC current. My fully charged S7 showing 100% charge still draws 150mA after hours of being plugged in. Since Li-Ion cells normally don't use a constant trickle charge, I "assume" something draws on the battery all the time along with the indicator light and buttons.
Booting up it draws a little over 1A, fully charged while booted up, it draws around 600mA. While charging and powered up, it draws 914mA. Charging while off, it draws 1160mA. Far from 2A.
wptski said:
My bad thinking measuring AC input current instead of DC current since this thread is about USB power.
Used a cheap ReTrak USB extension cord that loses connections to seperate the wire to measure DC current. My fully charged S7 showing 100% charge still draws 150mA after hours of being plugged in. Since Li-Ion cells normally don't use a constant trickle charge, I "assume" something draws on the battery all the time along with the indicator light and buttons.
Booting up it draws a little over 1A, fully charged while booted up, it draws around 600mA. While charging and powered up, it draws 914mA. Charging while off, it draws 1160mA. Far from 2A.
Click to expand...
Click to collapse
I understand that, but you are missing the point, if the internal wiring of these tablets don't receive the 2A they want they WILL NOT even begin to charge. I tried literally dozens of chargers when I first got my S7, spent a couple hundred bucks actually, and none of the chargers not meant for larger devices won't work, and what those chargers all had in common, 2A output
The S7 can and will draw off low capacity ports, it just wont admit to charging unless it's at least 1A as it's just that.
I've had my S7 charge off a 500mA port on my pc at the rate of like 1%/hour while sleeping. As it's barely gaining even while idleing it's not really charging in the literal sense, but it's definitely charging in the technical sense.
Are your data lines shorted together? I believe most high draw devices wont attempt to pull 2A unless it detects that it's on a high draw charger (which I think do this to indicate it as such)
cdzo72 said:
I understand that, but you are missing the point, if the internal wiring of these tablets don't receive the 2A they want they WILL NOT even begin to charge. I tried literally dozens of chargers when I first got my S7, spent a couple hundred bucks actually, and none of the chargers not meant for larger devices won't work, and what those chargers all had in common, 2A output
Click to expand...
Click to collapse
I don't know why your various chargers didn't work but it doesn't seem to be because of current. It didn't charge at 2A or even close to that.
If what your saying correct, why was I able to charge at less than 2A then? Could this be a ROM issue? I only had Froyo for a few hours but I've read that it didn't support USB charging which came with HC but it only charges with the S7 OFF.
It's possible that the demand went higher and I just didn't see on my current clamp meter. I'll have to try a current clamp and a scope to see if I missed a peak level.
Also what we are refering to as the charger might not be a charger but only a power supply and the actual charging circuit is in the S7.
I did notice one odd thing though. The green LED lights up at around 90% battery level and it's still charging. I downloaded a battery app which read the same level.
wptski said:
I don't know why your various chargers didn't work but it doesn't seem to be because of current. It didn't charge at 2A or even close to that.
If what your saying correct, why was I able to charge at less than 2A then? Could this be a ROM issue? I only had Froyo for a few hours but I've read that it didn't support USB charging which came with HC but it only charges with the S7 OFF.
It's possible that the demand went higher and I just didn't see on my current clamp meter. I'll have to try a current clamp and a scope to see if I missed a peak level.
Also what we are refering to as the charger might not be a charger but only a power supply and the actual charging circuit is in the S7.
I did notice one odd thing though. The green LED lights up at around 90% battery level and it's still charging. I downloaded a battery app which read the same level.
Click to expand...
Click to collapse
You were able to charge because your charger was CAPABLE of outputting 2A at least... try charging with one that CAN'T put that out and you should find that the Streak will not charge, on ANY ROM has been my experience, custom or stock
cdzo72 said:
You were able to charge because your charger was CAPABLE of outputting 2A at least... try charging with one that CAN'T put that out and you should find that the Streak will not charge, on ANY ROM has been my experience, custom or stock
Click to expand...
Click to collapse
Capable is the magic word here. The wall wart isn't putting out 2A from what I've seen, unless it does for a split second at the start which I'm going to look into.
Most wall warts at whatever their rating is put out a higher voltage with no load and slightly higher than its marked voltage under a load. If it required [email protected] max., you used a [email protected], S7 needs more current, the voltage would decrease. What's been stated here might be that the voltage was being pulled down and that's why the S7 wouldn't charge, not "really" the 2A issue.
I have a battery pack/cell load testing device used on RC stuff that connects via USB port for its graphic software. There were issues with certain Dell laptops that had a low voltage at their USB ports.
Maybe starting fully charged would help?
I have the OEM T-Mobile car charger and I've found that if I have a full charge before plugging the Streak into the charger it maintains a full charge for as long as I'm driving/using it. Otherwise, with a less than full charge I've watched it slowly discharge even though it's plugged in and is charging.
FYI: I also have a top of the line car charger for an iPad2 that charges the iPad no matter what charge level I plug it in. This iPad charger has a USB port which I have plugged the Streak USB cord into and it also doesn't keep up with the Streak's discharge if the Streak isn't a full charge to begin with. Kind of strange because I would think the iPad would draw more than a Streak. (the iPad isn't plugged in at the same time the Streak is charging)
DCoop said:
Maybe starting fully charged would help?
I have the OEM T-Mobile car charger and I've found that if I have a full charge before plugging the Streak into the charger it maintains a full charge for as long as I'm driving/using it. Otherwise, with a less than full charge I've watched it slowly discharge even though it's plugged in and is charging.
FYI: I also have a top of the line car charger for an iPad2 that charges the iPad no matter what charge level I plug it in. This iPad charger has a USB port which I have plugged the Streak USB cord into and it also doesn't keep up with the Streak's discharge if the Streak isn't a full charge to begin with. Kind of strange because I would think the iPad would draw more than a Streak. (the iPad isn't plugged in at the same time the Streak is charging)
Click to expand...
Click to collapse
The S7 must run some check before it tries to charge . Whatever it is the OEM supplied power supply passes the test.
What's the specs on your two power supplies?
Just remember if you dont have the same 2A for charging in the car. You cannot charge the streak while its TURNED ON. Same with USB charging, just turn the streak OFF, then charge. It will work. =)
Otherwise, Id get a DC to AC converter for the car, plug in your normal adapter.
Hey all, I know this is a development area - but there is no General section for the G9... anyway...
I have an 80 Gen 9 original none hard drive none turbo which im installing in my car. So far it looks really really good - ill post a video when i finally get the facia on it. However I am struggling to keep up with the charge power wise.
I originally brought a tomtom microusb charger - which according to form puts out 1 amp (not enough). This works fine on my HTC evo 3d, but cant keep up with the power consumption of the 80. It does not show as a "slow" charger.
I then brought an adapter off ebay that has a 2.1a and a 1a port. These originally showed as slow, so I made an adapter cable shorting the data pins so it knows its a charger - but neither port can keep the thing powered, and both these and the tomtom 1 amp seem to discharge at the same speed while plugged in.
Im waiting on one from newmp3technology that is stated as a fast charger for the archos g9...
Now, on the device i have turned off bluetooth and wifi turned off, backlight always on at around 1/2 brightness, and i have it running an external laptop hard drive off the port on the back. GPS gets turned on when necassary - but doesnt really seem to negatively affect the power situation (which was kinda surpising). Ive set the maximum CPU usage at just 600mhz to try and kerb the power consumption also. While driving i have Poweramp continually playing, and have used copilot on and off for sat nav. It doesnt drop fast - but nor is it staying fully charged. Im sure I had no problems with this while on AC power in the house.
If anyone knows of a working fast charger, or has a suggestion I would be most greatful. I may between now and then test with an invertor and ac power supply. One other idea I have is to run the USB hard drive with a powered USB hub, to move the power consumption away from the device.
I believe there was one of those dual-usb chargers from Belkin, but knowing them the charger could be pretty expensive.
It also has one 2 amp and one 1 amp slot, though I have not tried it yet.
i have this
http://www.newmp3technology.com/francais/all-Archos-model-charger.htm
This is an other option www.newmp3technology.com/francais/archos-101-80-g9-cigar-split.htm
I also need to be able to run/ charge my 80G9 turbo on the road for long periods.
first the basics, the original Archos cable must be used to get max charge (its short and has the log like thing inline near tablet) every other cable/ wall charger I have tried will only give weak charge and if using tablet with other cable it may never charge at all *if you know this great, but everyday others have to find this out the slow or no charge way
now, that applies to the wall plug for sure but with a cigarette lighter usb adapter I'm not so sure you will get enough juice just with that cable. If there is a 12V adapter or complete plug and usb cord that gives full needed output, great. until its used and proven (real world) I don't know if it exist yet.
the best alternative may be to use a Power Inverter like one below, there are so many available I don't know if the ones with usb outlets would work, I have a cheap inverter I need to try but just with factory Archos wall plug & cable (I've used it in the past to power a hand grinder etc. with no problem, car battery stayed charged up even when vehicle was off)
http://www.amazon.com/Wagan-2003-6-...?s=electronics&ie=UTF8&qid=1329710122&sr=1-17
I use the original Wall-Charger that came with the Tablet in conjunction with an HTC USB Cable that came with my HTC Desire.
It's charging as fast as with the original Archos USB Cable.
Even the small Wall-Charger from the Desire charges the Tablet very fast.
OK Ive received the so called fast charger from newmp3technology and it registers as a slow charger using the original supplied cable from archos. It took 17 days to arrive... not particularly happy with newmp3technology.
Anyway, I have found that the tomtom charger does actually charge the system while it is active - even though its only a 1 amp charger and the system requires 1.5 amp. Over about a week of driving for approx 1.5 - 2 hours a day the charge has risen from 0% to 19%. I had a USB extension (no more than 1 meter long) in line with the charger and that actually slowed the rate of charge.
The system is active the whole time - usually playing music through power amp, and sometimes using GPS via copilot. Ill test again to see that it can still maintain charge with GPS running. These devices really only require a small amount of power - I used to run a full computer in car and that pulled a bunch of power.
Here's the general section
http://forum.xda-developers.com/forumdisplay.php?f=1511
No Probs - unfortunately that section did not exist when i created this thread...
Background
Hi all, I, for a very short period of time was suffering from the problem of my phone DISCHARGING while it was charging. This made no logical sense to me until I did some research, which I will detail below.
How USB Power works (Roughly)
Firstly let's discuss USB power provisioning. Strictly speaking, the specifications say that any given USB port should provide a maximum of 500mA (or 0.5A) at 5 volts. *Don't shoot me electronics guys, I'm simplifying for ease of explanations sake*. Imagine that ampage as the actual force of the charger, how quickly it can ram power into your phone. Like the rate of flow on a pipe.
The beginning of the problem
This was all fine and dandy when all USB was really used for was Keyboards, Mice, Memory, etc, low current draw devices. Something else I should mention here is that the Ampage that a port CAN provide is not the Ampage it DOES provide - the device draws a certain Ampage and if the USB controller agrees it outputs said Ampage. Later, when USB was beginning to be used for more power hungry applications, ie External hard drives, these required more power than the port could (In theory) provide. However, most more modern motherboards/USB controllers were more than capable of supplying plenty more Ampage if it was requested. This was breaking the specification but not in any massively dangerous way so as such nothing bad happens.
This is where we get to the actual issue people are experiencing here. The Nexus 4 is a standards compliant device in the respect that it seems to only draw 500mA from any USB port no matter what it's potential, unless it's an AC Wall wart. If you're experiencing problems with wakelocks (see XDA) and other things, this causes your phone to draw more than 500mA which means your phone actually discharges while it's charging! Terrible!
This is quite easy to get around, but again I'm going into detail so let's explain how the phone tells the difference between a dumb wall wart and a USB controller. Easily! The USB controller obviously makes use of the data pins found within the USB cable, whereas a wallwart just (almost always) shorts them out. The Nexus 4 can detect this short, and as such draw more power *While still in quotation marks staying in spec*.
The root problem is not with how the N4 is charging, it's with the wakelock you're experiencing which is causing the phone to draw so much power while the screen is off. While the screen is off and the phone is in Deepsleep (A CPU state where it uses very little power) - it should draw no more than 50mA leaving 450mA for charging the battery, but you guys are probably experiencing a wakelock of some sort.
Solutions to the problem or How to break a specification for the good of mankind
The simple solution is to install this app: https://play.google.com/store/apps/details?id=com.rootuninstaller.batrsaver
This forces the device into a Deep sleep when the screen goes off by killing applications and turning off all internal chipsets that have wakelock capability, most commonly networking on the Nexus 4. This will allow your phone to charge (slowly) off USB without an issue. Another common wakelock is when the device is picked up by your desktop as a media device. The USB controller inside the Nexus 4 forces a wakelock which keeps it from charging. Stupid design, I know.
* A more hackish solution is to install Francos kernel, buy his app, and tick the Fast charging option in the kernel settings dialog. This will force the phone to think that everything is an AC adaptor and will force the phone to draw as much current as it can from the USB port (which on most modern motherboards is fine, and results in extremely quick charging).
* An even simpler solution than all this is to just use a 'USB Charging cable' - this is simply a cable that does not have the Data pins, and as such does exactly the same as what enabling USB fast charge above does. http://www.ebay.co.uk/itm/Micro-USB...487076?pt=PDA_Accessories&hash=item51a465d124
If you live near a Poundland store here in the UK they sell a 4 in one USB cable type thing which turns 1 USB port into Ipod sync connector, Nokia connector, MicroUSB and MiniUSB, and this doesn't have the data pins and as such is excellent.
One final point, an excellent app for monitoring whether your device is actually charging or not and how quickly is Current widget: https://play.google.com/store/apps/details?id=com.manor.currentwidget&hl=en
This widget will tell you how much Ampage is going into or leaving your battery. If the battery icon is green, then it's discharging, if it's black/white then it's charging. The bigger the number, the faster the discharge/charge. This is an extremely easy way to test speed of chargers too.
Recommendations
Another solution, just use an AC Wall wart - they're cheap as hell and the one supplied with the Nexus 4 is an extremely fast charging one. Shame I've gone and lost mine.
A way to roughly monitor charging current draw
I'd also recommend you install https://play.google.com/store/apps/details?id=com.manor.currentwidget&hl=en and monitor, if the battery is green while charging it's discharging and you need a more powerful charger/to figure out what's causing your phone to use so much power.
General good values in Current Widget
I generally saw a max draw of about 750mA for charging (not including draw for powering the device, the Nexus 4 can draw more power to charge and power the device) on my old Rev10 first generation Nexus 4. On my new Rev12 board I'm noticing this increase to about 850mA.
Are higher amperage chargers any benefit to anyone?
Yes and no. You will not notice faster charging unless you use your device while charging. Your nexus will draw as much power as it needs to power the phone while charging at the fastest rate. For example on the stock 1.2a charger
1200mA | 800mA goes to charging 400mA goes to powering the phone idling
Let's say you start a stability test. Your phone will obviously be using a lot more power so this will happen
1200mA | -600mA goes to charging and 1800mA goes to powering the phone stability testing
That minus value above may look strange! Let me explain. If the phone needs more power than the charger can supply, it will draw from the battery. That's the minus number.
If you have a higher ampage charger like for example a 2.5a charger
2500mA | 800mA goes to charging 400mA goes to powering the device
Stability testing
2500mA | 700mA goes to charging 1800mA goes to powering the device
Can you see the difference?
DISCLAIMER: I am not an electronics engineer nor do I claim to be, I am simply a hobbyist and this is what I've found to be the case. Please correct me if I've made any mistakes, I want to learn.
Thanks!
Thanks so much for this post. It's very helpful.
kn100 said:
Another common wakelock is when the device is picked up by your desktop as a media device. The USB controller inside the Nexus 4 forces a wakelock which keeps it from charging. Stupid design, I know.
Click to expand...
Click to collapse
This isn't true for everyone then as mine connects and charges just fine off of my laptop and desktop when connected as a media device. In fact its on my laptop right now charging, gone from 68% to 81% in about 30 minutes and it shows connected as a portable media player.
Great info! Thanks for writing this!
In certain use cases the Nexus4 discharges faster than it charges and this is a very useful guide.
I use my phone for navigation in my car and having the GPS on and the screen at high brightness
drains the battery faster than the 0.5A car chargers can supply. Car chargers rated for 2.0A work well.
I haven't tried a 'USB charging cable' with the data pins shorted, it may work as well.
-Mindroid- said:
Great info! Thanks for writing this!
In certain use cases the Nexus4 discharges faster than it charges and this is a very useful guide.
I use my phone for navigation in my car and having the GPS on and the screen at high brightness
drains the battery faster than the 0.5A car chargers can supply. Car chargers rated for 2.0A work well.
I haven't tried a 'USB charging cable' with the data pins shorted, it may work as well.
Click to expand...
Click to collapse
was over in Nexus 7 forums and the 4.2.x kernel should have solved the problem at least for having to use shorted cables. have to wait and see if 4.2.2 brings any more changes.
http://forum.xda-developers.com/showthread.php?t=1984838
Section 6 in this link is about power supplied through USB
http://en.wikipedia.org/wiki/Universal_Serial_Bus
I can't tell if we have an updated kernel allowing faster usb charging as I'm limited by the power output of the usb port in my laptop. The output (5V at 500mA max) is controlled by the laptop (USB Standards) and it doesn't matter what the phone or cable is capable of as that's the max it will give out and that's about what I'm charging at. If I had a dedicated charging port in my laptop then it would be different and I could see if its able to draw more power. I have a 1.0 amp port in my car and it does charge at the higher amperage, I would assume it would do the same thing if I had a 2 amp usb port in the car. So I think the stock kernel has the fast usb charge built in it just depends upon if you have a usb port capable of providing a faster charger, it has nothing to do with the cable as I'm using a standard unmodified micro usb cable and its able to draw the max a usb device is able to put out.
thanks
thanks for a great detailed post!!!
I have the same trouble with my N4 when I was charging while using my phone...
I find it very slow... I guess I've been spoiled by my previous iPhone (which charges fairly fast)....
i might be stating the obvious but I find the phone charged "a lot" faster when it's OFF
if you are running low with your battery and need a quick 10 min charge, just do yourself a favour by turning off your phone...
the difference is quite significant!
kzoodroid said:
This isn't true for everyone then as mine connects and charges just fine off of my laptop and desktop when connected as a media device. In fact its on my laptop right now charging, gone from 68% to 81% in about 30 minutes and it shows connected as a portable media player.
Click to expand...
Click to collapse
Yup, me too. It only discharges while charging when I am playing like NFS most wanted.
Sent from my Nexus 4 using xda app-developers app
The issue with cables is with the LG usb wall charger as the one supplied isn't capable of getting the 5 volts at 1.2 amps that the charger is rated at, mine is getting around 300 - 400 mA. The micro usb cable I have in my car and use with my laptop (for charging and data transfer) is able to handle the higher amperage, it gets around 1 amp with the LG plug. There are no specs on these cables so I can't list a definitive difference and I would assume that the cable mod in the OP might help with the LG cable. It also might just be simpler to only buy those cables capable of handling higher amperage as obviously they are out there from my experience.
The cable I'm using is an RCA coiled charging/syncing cable model AH732CBR (has data pins). The maximum I'm getting from this is about 870 mA regardless of the amperage of the usb port, I've tried a 1.0, 1.2 and 2.1 and they are all around 870 mA on current widget. I would suppose if I could find a strictly charging cable I could get higher (link to ebay in OP is outdated) but this is still 2x that which I'm getting from the LG cable supplied with the phone which only puts out 300-400 mA. Our phone also has Qualcomm's quick charge which is supposed to improve battery charging times by 40%.
http://www.droid-life.com/2013/02/1...allows-your-device-to-charge-up-to-40-faster/
How do you measure how much mA the device draw from the charger?
Sent from my Nexus 4 using Tapatalk 2
omrij said:
How do you measure how much mA the device draw from the charger?
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
current widget, link is in the OP
kzoodroid said:
The cable I'm using is an RCA coiled charging/syncing cable model AH732CBR (has data pins). The maximum I'm getting from this is about 870 mA regardless of the amperage of the usb port, I've tried a 1.0, 1.2 and 2.1 and they are all around 870 mA on current widget. I would suppose if I could find a strictly charging cable I could get higher (link to ebay in OP is outdated) but this is still 2x that which I'm getting from the LG cable supplied with the phone which only puts out 300-400 mA. Our phone also has Qualcomm's quick charge which is supposed to improve battery charging times by 40%.
http://www.droid-life.com/2013/02/1...allows-your-device-to-charge-up-to-40-faster/
Click to expand...
Click to collapse
Bit of a late reply but please bear in mind the Nexus will NOT draw anything more than about 800mAh from the wall for charging alone. That is the absolute max and is a hardware limit - If the cable is transmitting that and it's showing in current widget you've got a good setup. See the added section in OP for more info on higher amperage chargers.
Yesterday I've received my Tab S2 8.0". After the first charge I connected the tablet to my computer to upload some files and I get a red "X" on the battery and the message: "Slow charger connected"
In the notification area I get a constant red "Device charging slowly. To charge faster, use the original charger".
Is this normal? Cause I'm using the USB cable that came with the device and tried with USB3.0 and USB2.0 with the same results.
Oh, extra info! The tablet was bought in France, I'm from Argentina.
XinsaX said:
Yesterday I've received my Tab S2 8.0". After the first charge I connected the tablet to my computer to upload some files and I get a red "X" on the battery and the message: "Slow charger connected"
In the notification area I get a constant red "Device charging slowly. To charge faster, use the original charger".
Is this normal? Cause I'm using the USB cable that came with the device and tried with USB3.0 and USB2.0 with the same results.
Oh, extra info! The tablet was bought in France, I'm from Argentina.
Click to expand...
Click to collapse
Yes it's normal.
USB ports cannot put out as much current as a decent charger (like the one the tablet came with). Hence it charges more slowly using USB (or indeed some inferior or lower powered plug-in chargers), and it's warning you that it is doing so. I think the maximum a USB2 port can provide is about 500mA, with USB3 about 900mA or so.
Compare that to the proper plug-in charger, which is 2A (if I remember correctly).
Some motherboards etc do have higher current USB ports for charging etc, but that's non-standard and they are usually specially labelled as such.
Oh, thanks for the help. I got a little scare with the warning.
I got the same tablet, and also noticed this warning about battery charing slowly, and asking me to use original charger.
It's working resonably ok with original charger, though it charges slow with other chargers with the same AMP rating. E.g. it charges slowly with the larger iPad charger, which is also 2 AMP rated ...
Charing with iPad charger is so slow, that when I use the device with during charging, it drains faster than it charges! Quick unusual ...
Anyone? Any comments?
Theres an excellent app called Ampere which gives you info on the tablets charging and power consumption - useful and interesting.
Cant post links yet so just search for it on Play
Also don't forget that (when not built-into the charger) the cable is also important to the amount of current reaching the tablet.
The best charger in the world may well struggle if a long cable with hair-thin high resistance wiring is used to transfer the power into the tablet.
Lastly even though many chargers are labelled as 5v 2A, they may not actually be able to provide that under load, and if things drop when a hungry device like a tablet is connected then things will slow up.
I have a few 5v 2A chargers which come up as slow charging, whereas others which were more purposefully designed (e.g. the 5v 2A charger from my old Nexus 7) work just as well as the supplied Samsung one.
DarrenHill said:
Also don't forget that (when not built-into the charger) the cable is also important to the amount of current reaching the tablet.
The best charger in the world may well struggle if a long cable with hair-thin high resistance wiring is used to transfer the power into the tablet.
Lastly even though many chargers are labelled as 5v 2A, they may not actually be able to provide that under load, and if things drop when a hungry device like a tablet is connected then things will slow up.
I have a few 5v 2A chargers which come up as slow charging, whereas others which were more purposefully designed (e.g. the 5v 2A charger from my old Nexus 7) work just as well as the supplied Samsung one.
Click to expand...
Click to collapse
this is such onfortunate ongoing issue
i got my Tab S2 - SM-T715Y in Thailand as i am backpacking Asia ..
I know the warranty is per country .. so I can not use it where I am now - in Vietnam .. or back home in USA
I realized that this was a major factor before buying .. so I can go through my credit cards extended warranty ..
in the future I will buy Acer or Asus or alike that have international warranty ..
yesterday I was on a road trip
and I was using my 12V car charger
and then a battery bank .. and I think it rigered this problem or fact that I drained my S2 to 0%
fact is that now it is showing "slow charger connected" .. I am using the original charger and cable
now it is slowly *discharging* when connected to AC!!
also will try to whipe the cache..
this is so terrible
I am losing faith in Samsung :/ (had charging issues with my Note 3 .. 8 months in .. motherboard issue)
I can not find a solution to this problem
I am thinking of putting it in a refrigirator? maybe it will do something to the battery?
I've been having a repeatable problem. I have a Note 9 that will charge faster when I disable fast charging under battery settings. I tested the load being drawn with a USB Power meter these are the results I got.
Using a USB-A to USB-C cable:
When QC is enabled:
Phone draws 0.5amp charge, 10ohms resistance at 5.02V.
When QC is disabled:
Phone draws 1.2 amps, 3.9 ohms resistance, at 5.02V
I am using the same cable, same power bank. The power bank's USB-A port is able to draw ~1.9 amps at 5V, tested using a USB Meter and Load Tester that will put the USB under 1 amp and 2 amp loads at 5V, with resistance being ~2.7 ohms without the power bank turning off. I haven't tested the power bank at 9V, I don't have a 9V load tester
When I immediately switch from QC to non QC, the results above are repeatable.
Things I Have Done So Far:
Reboot Phone
Clear Phone Cache
Reboot Into Safe Mode
Try Different Charging Cables, Blocks, including OEM parts.
Every once in a while, it will switch back to being able to QC fast charge but it is random.
If I use a Power delivery capable block charger, it will charge at ~2750mA (I dont have other numbers like amps, voltage, or resistance, I'm still waiting on a USB-C meter)
My phone's wireless charging has no problem operating at it's max capacity
Any one else have this problem? Anything else I could do before I factory reset my phone?
I posted about losing Fast Charge thru the stock cable a while back and got no answers or a fix. I have not tried turning off the option to see if it charges any faster. It takes almost 2 to 3hrs to fully charge at this point. I'll take any fix or work around at this point.
TokedUp said:
I posted about losing Fast Charge thru the stock cable a while back and got no answers or a fix. I have not tried turning off the option to see if it charges any faster. It takes almost 2 to 3hrs to fully charge at this point. I'll take any fix or work around at this point.
Click to expand...
Click to collapse
Turning off fast charge made my charging a bit better. With Fast Charge (FC) turned on, I was getting 0.5amps (gave around 400-500mA). Turning FC off, sped up my charging by 50%, charging at 1.2 amp (roughly gave me 800-1000mA; Both charges were at 5V). Im able to charge at around 1000 mA with this setup, a little less than wireless quick charge. No idea why turning it off helped.
Another workaround that brought my charging speed WAY UP, to 2500mA, was buying a Power Delivery (PD) capable block WITH A USB-C to USB-C cable. I can get normal fast charging speeds with that setup.
I cant get FC with USB-A to USB-C cables, which is frustrating as most of my charging blocks are the regular USB-A input port.
Hope this helps you. 2-3 hour charge is brutal.
What's even weirder is in my car my phone would barely charge. But since I lost FC at home, it started working in the car. So in my car I can FC but not at home. I even tried the wire I use in the car and still nothing. Idk what is going on
Is it possible that turning off QC is turning off a regulation in the software to keep the battery from overheating? With this regulation turned off that would normally be on when quickcharging, the regulation is not active, thus causing the battery to charge at a less regulated speed, causing charging to be faster? Maybe there's a QC bug currently that's hampering it's full potential? What software version are you guys currently?
I just checked QC on mine on the latest Xfinity version and no matter what charger or cable I use with the function, it is working.
It's def not a software thing. I'm on latest October patch. Samsung told me that they have seen some issue with the charging port and once it goes bad there is nothing to do but replace it. They told me to bring it in to a store for repair thru my carrier. Haven't had a chance to go.
---
Jammol said:
Is it possible that turning off QC is turning off a regulation in the software to keep the battery from overheating? With this regulation turned off that would normally be on when quickcharging, the regulation is not active, thus causing the battery to charge at a less regulated speed, causing charging to be faster? Maybe there's a QC bug currently that's hampering it's full potential? What software version are you guys currently?
I just checked QC on mine on the latest Xfinity version and no matter what charger or cable I use with the function, it is working.
Click to expand...
Click to collapse
That what I was thinking. Something is actively limiting the charge coming in. Everytime I had quick charge enabled I've been monitoring the ohms and the resistance would automatically jump to 10ohms. Then I disable QC and the resistance automatically drops to around 6 ohms.
I'm running Android Pie 9.0, Kernel version 4.9.112
TokedUp said:
It's def not a software thing. I'm on latest October patch. Samsung told me that they have seen some issue with the charging port and once it goes bad there is nothing to do but replace it. They told me to bring it in to a store for repair thru my carrier. Haven't had a chance to go.
Click to expand...
Click to collapse
Nocturncal said:
That what I was thinking. Something is actively limiting the charge coming in. Everytime I had quick charge enabled I've been monitoring the ohms and the resistance would automatically jump to 10ohms. Then I disable QC and the resistance automatically drops to around 6 ohms.
I'm running Android Pie 9.0, Kernel version 4.9.112
Click to expand...
Click to collapse
Yeah it could definitely be hardware related as well, due to each pin on a type c charging serving different purposes. There are two specific pins(I think it's two), that are responsible for enabling higher input of electricity. Couple years ago Google made comments about the cheap Amazon knock off cables and why they failed after a short while. Wouldn't surprise me if Samsung cheaped up for the cables and port on the device. I'll have to try and find the articles I read concerning the pins.
Here's a good start to understanding Type C.
https://www.allaboutcircuits.com/te...pe-c-which-pins-power-delivery-data-transfer/
Its the **** cable they supply with the phone.
I had all the same problems.
I noticed that when I turn off quick charge the phone can charge at 5v 1.7 amps. (USB doctor).
When I turn on quick charge it can only charge at 5 volts 0.40 amps.
The phone is trying to charge at 9 volts but for some reason cant so it goes into this safe mode.
I purchased a new Samsung cable it lasted for a week and developed the same problem.
A hint when it develops this problem Dex stops working.
I tried all kinds of cables. One Plus 5, and a few others. I finally got it to work again with my wifes one plus 6 cable.
Im now researching USB Type C ports and USB standard 2, 3, 3.1, 3.2
As well the quick charge tech used by Samsung. Its not Quick Charge 2. Its a proprietary standard.
So if your having problems with quick charge it could be due to your cable or your Port. Things very rarely go wrong with the charger. Also get yourself a USB Doctor. Its a big help. And only costs a few bucks.
Hope this helps somebody out there.
Right now I am trying to compare Note 9 vs Note 20 USB cable.