MY PHONE CURRENTLY RUNS ATT AND I HAVE GOT MY HANDS ON THE MAY UPDATE FEEDBACK PHONE RUNS SMOOTHER BATTERY IS A LITTLE BETTER THERE HAS BEEN SOME SMALL CHANGES
DOWNLOAD LINKS TAKEN DOWN
THREAD CLOSED AS I HAVE MOVED ON TO ANDROID P FOR THE S9
THREAT LOCATED HERE https://forum.xda-developers.com/ga...ries--other-development/9-0-g960u-s9-t3858248
Pic of my other didn't show up
david11000 said:
MY PHONE CURRENTLY RUNS ATT AND I HAVE GOT MY HANDS ON THE MAY UPDATE FEEDBACK PHONE RUNS SMOOTHER BATTERY IS A LITTLE BETTER THERE HAS BEEN SOME SMALL CHANGES I HAVE NOTICED
Click to expand...
Click to collapse
Hands on as an OTA or some other way. ?
Tel864 said:
Hands on as an OTA or some other way. ?
Click to expand...
Click to collapse
Zip file
Care to upload? All the other mirrors are paid.
ChongoDroid said:
Care to upload? All the other mirrors are paid.
Click to expand...
Click to collapse
i flashed this via phone recovery http://www.mediafire.com/file/exb2y3vc8jkm133/update.zip
david11000 said:
i flashed this via phone recovery http://www.mediafire.com/file/exb2y3vc8jkm133/update.zip
Click to expand...
Click to collapse
It's only 330mb tho, most firmwares are upwards of 3.3gb
This sounds like an incremental update, if it is I might be able to flash this over existing ATT firmware
Let me know how it goes
Are you rooted?
Psyscope said:
Are you rooted?
Click to expand...
Click to collapse
No snapdragon phones are only exynos
ChongoDroid said:
No snapdragon phones are only exynos
Click to expand...
Click to collapse
If you have any trouble do this
Take the sim and sd card slot out of your phone
Download this rom
Extract
Put everything that matches in nodded Odin
Flash the CSC NOT THE HOME CSC
phone will reboot into recovery
Flash said zip that was on first post that you have put on your sd card
https://drive.google.com/file/d/1sdlMwx7xBvPlJdvA300pVWXfhntZbgCD/view?usp=drivesdk
david11000 said:
If you have any trouble do this
Take the sim and sd card slot out of your phone
Download this rom
Extract
Put everything that matches in nodded Odin
Flash the CSC NOT THE HOME CSC
phone will reboot into recovery
Flash said zip that was on first post that you have put on your sd card
https://drive.google.com/file/d/1sdlMwx7xBvPlJdvA300pVWXfhntZbgCD/view?usp=drivesdk
Click to expand...
Click to collapse
Change permission of the zip lol
Worked for me, thanks a lot.
Had to format first and then flash U1.
So I realized I am actually on the arc6 tmb update but they're both 960u.
I put the update.zip on the root of my SD card and when I boot to recovery it says installing update briefly and then goes to recovery. From there if click install update from SD card it says "can't mount SD" so I guess I'll copy this to my PC and then adb it over.
So my question is, can I install a ATT update.zip if I'm on 960u TMB? If so can I do it from recovery?
I don't think this update is certified yet / won't pass safety net. Someone on it correct me if I'm wrong.
david11000 said:
If you have any trouble do this
Take the sim and sd card slot out of your phone
Download this rom
Extract
Put everything that matches in nodded Odin
Flash the CSC NOT THE HOME CSC
phone will reboot into recovery
Flash said zip that was on first post that you have put on your sd card
https://drive.google.com/file/d/1sdlMwx7xBvPlJdvA300pVWXfhntZbgCD/view?usp=drivesdk
Click to expand...
Click to collapse
All the other guides say to flash the HOME_CSC and not the CSC, what's the difference?
---------- Post added at 03:33 PM ---------- Previous post was at 03:07 PM ----------
dbrohrer said:
I don't think this update is certified yet / won't pass safety net. Someone on it correct me if I'm wrong.
Click to expand...
Click to collapse
My device says uncertified with this, yes
Nardholio said:
All the other guides say to flash the HOME_CSC and not the CSC, what's the difference?
---------- Post added at 03:33 PM ---------- Previous post was at 03:07 PM ----------
My device says uncertified with this, yes
Click to expand...
Click to collapse
Yes I would told by Samsung and Google
If I device says uncertified that means it hasn't updated the play store in wich the store don't no what apps are compatible with said device nor has Google play store has update with the compatible apps
But I will no longer be posting in Galaxy s9 fourm as there been a apple of Android
I have switched to the pixel today best of luck of all of you
Can you seriously not?..
To answer some questions I will no longer be supporting download links on this forum
I have moved and created a new one as I'm updating and releasing android p download links for the s9
New fourm located here
https://forum.xda-developers.com/ga...ries--other-development/9-0-g960u-s9-t3858248
Related
Hi
I have ATT galaxy note 3 first time I installed a rom I did it over the stock rom slot, no biggie, to make a long story short last rom I had was alliance last version, didn’t work for me, so I decided to install (FireNoteDeodexV20XGrandFinale)
So I booted into Safestrap 3.75(TWRP v2.7.1.0) by simply restarting my device and got that recovery or continue buttons.
So I did a factory wipe but I also did an advance wipe and checked (system).
After that I went to install and selected the above ROM zip and installed it and after I hit continue at the safestrap screen where it also says disabled it always has. It stays blank.
So I booted up to SS again and now whenever I select factory wipe or system wipe or try to mount I get the same message E:Unable to mount ‘/system’ and E:Unable to mount ‘/systemorig’
And now im stuck with no phone and cant install any ROM
Theres a lot of threads about this but please oh please masters bare with me I just need step by step, what should I do and what files do I need to download.
Your help is highly appreciated.
Are you on Jellybean or Kitkat..this should be in Q&A section. But we will try to get you going
FireKatV11...FireGearV16
Thx for the replay
On kitkat
mushtie2 said:
Thx for the replay
On kitkat
Click to expand...
Click to collapse
If you have a computer. And a sdcard slot on it download and install a kitkat rom of your choice from the att note 3 rom section. Because you most likely are on the newest bootloader you can't flash jb roms. You have to stick to kitkat roms.
done
i just downloaded UrDroid_ATT_Stock_KitKat_N900AATTCNC2_Rooted_Odexed_Ver_2.zip
warfenix said:
If you have a computer. And a sdcard slot on it download and install a kitkat rom of your choice from the att note 3 rom section. Because you most likely are on the newest bootloader you can't flash jb roms. You have to stick to kitkat roms.
Click to expand...
Click to collapse
done
i just downloaded UrDroid_ATT_Stock_KitKat_N900AATTCNC2_Rooted_Odexe d_Ver_2.zip
mushtie2 said:
done
i just downloaded UrDroid_ATT_Stock_KitKat_N900AATTCNC2_Rooted_Odexe d_Ver_2.zip
Click to expand...
Click to collapse
Put the card back in phone . Wipe phone like befor and flash the urdroid. Let me know if that doesn't work
warfenix said:
Put the card back in phone . Wipe phone like befor and flash the urdroid. Let me know if that doesn't work
Click to expand...
Click to collapse
Didnt work tried and it failed.
You should look in the general section for att note 3 and find the Odin files for kitkat and Odin restore your phone. Then start over rooting and installing a custom rom. Probably your best bet.
---------- Post added at 01:58 PM ---------- Previous post was at 01:56 PM ----------
mushtie2 said:
Didnt work tried and it failed.
Click to expand...
Click to collapse
Befor that. Thoufh. Did you check md5sum to make sure it was a complete download and not corrupted
warfenix said:
You should look in the general section for att note 3 and find the Odin files for kitkat and Odin restore your phone. Then start over rooting and installing a custom rom. Probably your best bet.
---------- Post added at 01:58 PM ---------- Previous post was at 01:56 PM ----------
Befor that. Thoufh. Did you check md5sum to make sure it was a complete download and not corrupted
Click to expand...
Click to collapse
how do i check md5sum?
mushtie2 said:
how do i check md5sum?
Click to expand...
Click to collapse
I believe urdroids op has it posted. And you can compare it to one you get. There are md5sum checkers on the playstore
you sir are the master of the universe thanks a million i actually went over to the soft brick thread and now my phone is fresh and new.
thx again and let me know if you need me to wash your car or pickup your groceries.
mushtie2 said:
you sir are the master of the universe thanks a million i actually went over to the soft brick thread and now my phone is fresh and new.
thx again and let me know if you need me to wash your car or pickup your groceries.
Click to expand...
Click to collapse
Lmao well its good you got it working again. I've been in the boat a few times
Someone can provide the update G900AUCU4COI5 file?
Thank you.
Our friend LoSt180 did great work to find the file and share with us.
(http://forum.xda-developers.com/att-...t3231280/page6)
My thanks! :good:
Dyone Aliano said:
Someone can provide the update G900AUCU4COI5 file?
Thank you.
Click to expand...
Click to collapse
SORRY, THIS IS NOT THE FILE...
Not out yet. Waiting, but it seems that your post has been looked at 155 times so far today...
What would you do with it anyway? If you Odin it, you won't have root when you get done and if you had root, it won't be there after....POOF...
MAYBE WHEN IT COMES OUT, SOMEONE MIGHT BE ABLE TO PRE-ROOT IT, BUT THEN IT WILL JUST BE CRAPPY STOCK ANYWAY....
I just want the original .zip file to put on the external card and update manually.
When this file does actually come out, do you think it can be used on the pre-installed OF3 firmware? I Realllllly need firmware OF3 or above... Thanks!
CreeperPVP said:
When this file does actually come out, do you think it can be used on the pre-installed OF3 firmware? I Realllllly need firmware OF3 or above... Thanks!
Click to expand...
Click to collapse
NEED??? LOL. Well if it stock OF3, then you can update it because you probably do not have root. If you have root with OF3, that means you used @muniz_ri procedures, and he said a while ago that 5.1.1 probably wont be rootable, but he also recently said he will look at it when/if the file is available , whenever that may be (I am watching several sites). If you are not rooted, you can always try to update thru OTA, when that is available. I will not download it because once it downloads it just updates and that ain't gonna happen on my phone and also because I am on a custom rom and am not willing to even try it unless he can come up with a rooted version which will keep the BL at OA1 so one can go back. For me this would only be a test to see if it was any better than 5.0, but soon after I would go back to my beloved TMS5 3.0 rom. IT'S GREAT!!!
Dyone Aliano said:
Someone can provide the update G900AUCU4COI5 file?
Thank you.
Click to expand...
Click to collapse
Our friend LoSt180 did great work to find the file and share with us.
(http://forum.xda-developers.com/att-galaxy-s5/general/5-1-1-phones-t3231280/page6)
My thanks! :good:
Direct link: https://drive.google.com/file/d/0B11_scgy1qonMW45T0lRbXQ3ZHM/view?usp=docslist_api
Hope it helps. Do NOT install if rooted, wait for an update.
@lowrider262 provided good instructions on how to install
lowrider262 said:
download the .cfg file, rename it update.zip, put it on the root of your external sd card. Then power off the phone and hold vol up+home+power until you see recovery in the corner, then let go of power and volume and keep olding home till you see the recovery menu. use volume down to choose update from sd card and power to select it then find the update.zip file and select it. BTW this will wipe your data so backup whatever you need before hand.
Click to expand...
Click to collapse
Do you think this could work to any g900a even if I don't have the AT&T Sim and unrooted ?
---------- Post added at 08:41 PM ---------- Previous post was at 08:09 PM ----------
LoSt180 said:
Direct link: https://drive.google.com/file/d/0B11_scgy1qonMW45T0lRbXQ3ZHM/view?usp=docslist_api
Hope it helps. Do NOT install if rooted, wait for an update.
@lowrider262 provided good instructions on how to install
Click to expand...
Click to collapse
The file says of3 to oi5, I'm in kit kat 4.4.2, will this work?
WesEd178 said:
Do you think this could work to any g900a even if I don't have the AT&T Sim and unrooted ?
---------- Post added at 08:41 PM ---------- Previous post was at 08:09 PM ----------
The file says of3 to oi5, I'm in kit kat 4.4.2, will this work?
Click to expand...
Click to collapse
if you are on Kit Kat, then update to OC4 using
Update to oc4 using what? And later, how to update to oi5?
AT&T Samsung Galaxy S5 (G900A) device with Cricket Wireless service.
I upgraded to OC4 by downloading the OTA update and tried doing the same to OI5 from the link shared in this thread and received 'E: Error in /..../package.zip (status 7)' the following preceding the error. 'Package expects build fingerprint of samsung/...../G900AUCU4BOF3' and then says I'm on G900AUCU3BOC4, which is accurate.
Device is not rooted, nor have any system files been altered.
These are the listed updates on the AT&T website. I don't see OF3 update.
Released 2015 OCT 22: G900AUCU4COI5
Released 2015 AUG 12: G900AUCU2AOA2
Released 2015 JUL 1: G900AUCU4BOF2
Released 2015 APR : G900AUCU3BOC4
Why are they expecting OF3 if they've only released OF2 and OA2 after the OC4 update?
And ... anyone else running into this?
UPDATE: As others have said (from searching) Best Buy can do the update at no charge. That's what a Samsung rep told me and also said since I have the device from AT&T, but service through Cricket Wireless, I will have to get updates from Best Buy and will not get them OTA.
UPDATE2: Saturday I went to Best Buy, they updated my phone to OF3 and I went home and used the file posted earlier in the thread to update to 5.1.1. No issues.
l_facundo said:
Hello, sorry for the delay.
The stock update files for update in Recovery Mode from an external memory are:
OA1 to OC4: 1drv.ms/1l3kSFp
OC4 to OF2: 1drv.ms/1l3kTco
OF2 to OF3: 1drv.ms/1l3kVky
OF3 to OI5: 1drv.ms/1l3kUgy
These are URL links to my onedrive. Since I'm new and I can not have tagged links.
Best Regards!
Facundo
Click to expand...
Click to collapse
And that's how you update from OC4 stock to 5.1.1
---------- Post added at 08:37 AM ---------- Previous post was at 08:33 AM ----------
l_facundo said:
Is this file: androidfilehost.com/?fid=24052804347773475
Inside, the version_info file said: "Current Firmware :G900AUCU3BOC4/G900AATT3BOC4/G900AUCU3BOC4
Update Firmware :G900AUCU4BOF2/G900AATT4BOF2/G900AUCU4BOF2"
This is correct, my current version is: G900AUCU3BOC4.
Any idea?
---------- Post added at 12:37 PM ---------- Previous post was at 11:54 AM ----------
Finally i can update
First: Install by ODIN the G900A_OF2_Stock_Kernel.tar.md5
Second: G900A_OF2_tF3_OTA.zip
And the miracle happened
After, install G900A_OF2_tF3_OTA.zip
And then finally install G900A_OF3_tI5_OTA.zip
Thanks for your help!
Click to expand...
Click to collapse
And here is if OC4 to OF2 doesn't work right away! thank Facundo!!
https://www.androidfilehost.com/?fid=24052804347773469
WesEd178 said:
And that's how you update from OC4 stock to 5.1.1
---------- Post added at 08:37 AM ---------- Previous post was at 08:33 AM ----------
And here is if OC4 to OF2 doesn't work right away! thank Facundo!!
https://www.androidfilehost.com/?fid=24052804347773469
Click to expand...
Click to collapse
Thanks for files!
Can anybody explain how-to update from recovery? Should I rename this files to "Update.zip" ? Or I can use its own name?
Can I update from stock recovery? I'm unrooted on OC4.
Oh YEAH! I'm on 5.1.1 now!!!
bender19911 said:
Oh YEAH! I'm on 5.1.1 now!!!
Click to expand...
Click to collapse
Awesome! Just flash then like that, for those who are wondering
---------- Post added at 08:25 AM ---------- Previous post was at 08:25 AM ----------
bender19911 said:
Oh YEAH! I'm on 5.1.1 now!!!
Click to expand...
Click to collapse
Awesome! Just flash them like that in recovery, for those who are wondering
WesEd178 said:
Awesome! Just flash then like that, for those who are wondering
---------- Post added at 08:25 AM ---------- Previous post was at 08:25 AM ----------
Awesome! Just flash them like that in recovery, for those who are wondering
Click to expand...
Click to collapse
does anyone have these files in Odin-flashable way? I would prefer not to install a Custom Recovery and I am stuck on NG3 because ATT won't allow me to upgrade as my SIM is from a different carrier.
sensei22 said:
does anyone have these files in Odin-flashable way? I would prefer not to install a Custom Recovery and I am stuck on NG3 because ATT won't allow me to upgrade as my SIM is from a different carrier.
Click to expand...
Click to collapse
I guess you don't need a custom recovery
WesEd178 said:
I guess you don't need a custom recovery
Click to expand...
Click to collapse
Thanks and that is awesome, so I can just go ahead and use the factory recovery? not even rename the files?
sensei22 said:
does anyone have these files in Odin-flashable way? I would prefer not to install a Custom Recovery and I am stuck on NG3 because ATT won't allow me to upgrade as my SIM is from a different carrier.
Click to expand...
Click to collapse
sensei22 said:
Thanks and that is awesome, so I can just go ahead and use the factory recovery? not even rename the files?
Click to expand...
Click to collapse
Not even rename files buddy that's how I did it all from stock. Keep us updated!
WesEd178 said:
Not even rename files buddy that's how I did it all from stock. Keep us updated!
Click to expand...
Click to collapse
thanks man, you are awesome. did you have to wipe anything or just dirty flashing?
Inside of zip you got 4 files :
AP_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
BL_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
CP_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
CSC_ATT_G920AATT6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
Unzip and put in appropriate file windows in ODIN
BL file in BL window
AP file in AP window
CP file in CP window
CSC file in CSC window.
Wait for every file to load in ODIN, put your phone in Download mode connect to PC look for get connected to ODIN, then click start. All data will be lost so remember to backup all files you need it.
If you don't know how to use ODIN search YouTube.
Good luck
Download files
Odin here 3.12.7
G920AATT6DQC1 ODIN files - status " UP"
I will not post this files because seems like nobody want them.
norbarb said:
I will not post this files because seems like nobody want them.
Click to expand...
Click to collapse
I would like the files please. Please post them or PM me.
Publish the download link please
tracer200 said:
I would like the files please. Please post them or PM me.
Click to expand...
Click to collapse
cesarsuarez said:
Publish the download link please
Click to expand...
Click to collapse
Ok. Link is UP
norbarb said:
Ok. Link is UP
Click to expand...
Click to collapse
So does this firmware have the version 6 Bootloader? Like I currently have EQC9, if I change to this one will the phone work?
tracer200 said:
So does this firmware have the version 6 Bootloader? Like I currently have EQC9, if I change to this one will the phone work?
Click to expand...
Click to collapse
Yes. Bootloader version is number after U or S. So this one is G920AUCS6DQC1. This indicate that bootloadr is V6
norbarb said:
Yes. Bootloader version is number after U or S. So this one is G920AUCS6DQC1. This indicate that bootloadr is V6
Click to expand...
Click to collapse
Thank you, I flashed it and and I'm restoring apps now.
Anyone here has the odin file of nougat for g920a? Please do share. Im currently on dqb3..
Beasty2215 said:
Anyone here has the odin file of nougat for g920a? Please do share. Im currently on dqb3..
Click to expand...
Click to collapse
In order to have some Odin files it have to be officially realised
Clicking from Edge of Galaxy
Worked good. Thank you.
You can upload the Nougat firmware
will it work on an unlocked samsung s6 smg920a
After flash this, I have the dm verity verification failed, what can I do? TIA..
is it really Nougat firmware?
norbarb said:
Inside of zip you got 4 files :
AP_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
BL_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
CP_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
CSC_ATT_G920AATT6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
Hi, I flashed this QC1 firmware a couple of times but still I see Android 6.0 under Software info after installing. What could be the issue? No Nougat!
Click to expand...
Click to collapse
raakaysh said:
norbarb said:
Inside of zip you got 4 files :
AP_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
BL_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
CP_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
CSC_ATT_G920AATT6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
Hi, I flashed this QC1 firmware a couple of times but still I see Android 6.0 under Software info after installing. What could be the issue? No Nougat!
Click to expand...
Click to collapse
Because this is not Nougat.
Go here to continue to Nougat
https://forum.xda-developers.com/att-galaxy-s6/general/adb-official-updates-t3601009
Click to expand...
Click to collapse
Im runing this firmware, is it okay to directly upgrade to nougat? and what firmware?
norbarb said:
Inside of zip you got 4 files :
AP_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
BL_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
CP_G920AUCS6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
CSC_ATT_G920AATT6DQC1_CL9462607_QB12845089_REV02_user_low_ship.tar.rar
Unzip and put in appropriate file windows in ODIN
BL file in BL window
AP file in AP window
CP file in CP window
CSC file in CSC window.
Wait for every file to load in ODIN, put your phone in Download mode connect to PC look for get connected to ODIN, then click start. All data will be lost so remember to backup all files you need it.
If you don't know how to use ODIN search YouTube.
Good luck
Download files
Odin here 3.12.7
G920AATT6DQC1 ODIN files - status " UP"
Click to expand...
Click to collapse
---------- Post added at 05:31 PM ---------- Previous post was at 05:23 PM ----------
RoryB said:
raakaysh said:
It is okay to update this while samsung account is logon on my device and the reactivation lock is on.
I cannot logout my account. please advise.
Because this is not Nougat.
Go here to continue to Nougat
https://forum.xda-developers.com/att-galaxy-s6/general/adb-official-updates-t3601009
Click to expand...
Click to collapse
Click to expand...
Click to collapse
jrosea said:
Im runing this firmware, is it okay to directly upgrade to nougat? and what firmware?
---------- Post added at 05:31 PM ---------- Previous post was at 05:23 PM ----------
YES !
Click to expand...
Click to collapse
How to root G920AUCS6DQC1
will this root my phone? I need to root my 920A.
S6 AT&T 920a DPJ1 to Dqc1
sir iam on 6.0.1 baseband version G920AUCS5DPJ1 can i directly update to 7.0 BB DQC1
So I just installed Lineage 14.1 on my phone but discovered that it has a HUGE bug where it will not load in the contacts off of my SIM
I did make a System Backup using TWRP but it wont let me RoolBack!!! When I go to the file that I saved on my laptop, I dont see it in a zip so so I do not know how to rollback. I picture of what I see in the folder will be here - [IMG="1 - Picture of the TWRP Backup!!!"]https://ibb.co/c2FJCv[/IMG]
I also have a FULL OTA UPDATE as well... PLEASE let me know how to get back to stock rom and what I have to do
storm313 said:
So I just installed Lineage 14.1 on my phone but discovered that it has a HUGE bug where it will not load in the contacts off of my SIM
I did make a System Backup using TWRP but it wont let me RoolBack!!! When I go to the file that I saved on my laptop, I dont see it in a zip so so I do not know how to rollback. I picture of what I see in the folder will be here - [IMG="1 - Picture of the TWRP Backup!!!"]https://ibb.co/c2FJCv[/IMG]
I also have a FULL OTA UPDATE as well... PLEASE let me know how to get back to stock rom and what I have to do
Click to expand...
Click to collapse
since the contacts are in sim card,
first i would suggest you to take out your sim card and then perform a dload flash
or else manually flash boot.img and system.img either by fastboot or through twrp
next time when you backup, do a backup of both system and boot with data partitions so that you wont have a problem restoring it
thilak devraj said:
since the contacts are in sim card,
first i would suggest you to take out your sim card and then perform a dload flash
or else manually flash boot.img and system.img either by fastboot or through twrp
next time when you backup, do a backup of both system and boot with data partitions so that you wont have a problem restoring it
Click to expand...
Click to collapse
I dont know where to find those though... Thats the thing. Please tell me where to get those image files
storm313 said:
I dont know where to find those though... Thats the thing. Please tell me where to get those image files
Click to expand...
Click to collapse
do you have a stock firware with you?? something like update.zip ? for your mmodel?
---------- Post added at 11:07 AM ---------- Previous post was at 11:06 AM ----------
btw, whats your model number?
thilak devraj said:
do you have a stock firware with you?? something like update.zip ? for your mmodel?
---------- Post added at 11:07 AM ---------- Previous post was at 11:06 AM ----------
btw, whats your model number?
Click to expand...
Click to collapse
No I dont.
Model number NMO-L23
Was trying to get the image via Firmware Finder but no working
Also I made a Backup using TWRP Tool and that's not working either *sighs*
storm313 said:
No I dont.
Model number NMO-L23
Was trying to get the image via Firmware Finder but no working
Click to expand...
Click to collapse
give me a minute, ill check out
thilak devraj said:
give me a minute, ill check out
Click to expand...
Click to collapse
Okay thanks you
Rommco05 said:
Why TWRP backup don't work?
Click to expand...
Click to collapse
Whenever I try, I gives some error about check device...while other times after restarting it, it just doesnt do anything.
Any suggestions?
Rommco05 said:
Why TWRP backup don't work?
Click to expand...
Click to collapse
because , he just backed up system partition, and not boot partition,
you have to backup all the three partitions for a twrp backup to work perfectly
for similar incidents in future i recommend backuping contacts to your google account.
storm313 said:
Okay thanks you
Click to expand...
Click to collapse
sorry , didnt find any firmware related ti nmo-l23
---------- Post added at 11:25 AM ---------- Previous post was at 11:24 AM ----------
thelous said:
for similar incidents in future i recommend backuping contacts to your google account.
Click to expand...
Click to collapse
i recomend it @storm313
So there isnt any way of reverting to stock rom? OR any other custom firmware that works?
storm313 said:
So there isnt any way of reverting to stock rom? OR any other custom firmware that works?
Click to expand...
Click to collapse
you can flash custom roms
thilak devraj said:
you can flash custom roms
Click to expand...
Click to collapse
what if i was able to get the update.zip
Would that solve the problem and get me back to stock?
thilak devraj said:
you can flash custom roms
Click to expand...
Click to collapse
Also any custom rom you recommend that I should try to flash
storm313 said:
what if i was able to get the update.zip
Would that solve the problem and get me back to stock?
Click to expand...
Click to collapse
yes, that would revert you back to stock firmware, which, i think, has an option to import contacts from sim card
---------- Post added at 11:42 AM ---------- Previous post was at 11:42 AM ----------
storm313 said:
Also any custom rom you recommend that I should try to flash
Click to expand...
Click to collapse
lineage is the best
thilak devraj said:
yes, that would revert you back to stock firmware, which, i think, has an option to import contacts from sim card
---------- Post added at 11:42 AM ---------- Previous post was at 11:42 AM ----------
lineage is the best
Click to expand...
Click to collapse
Well I dont think it is after all that happened so far
Will try to use firware finder again as I did see a full OTA Package on it for NMO-L23 so I see if I can get the Update.zip from there
storm313 said:
Well I dont think it is after all that happened so far
Will try to use firware finder again as I did see a full OTA Package on it for NMO-L23 so I see if I can get the Update.zip from there
Click to expand...
Click to collapse
all the best! :good:
storm313 said:
Well I dont think it is after all that happened so far
Will try to use firware finder again as I did see a full OTA Package on it for NMO-L23 so I see if I can get the Update.zip from there
Click to expand...
Click to collapse
Does your device have support for emui 5.0 ?
When I try to flash a ins firmware to my Note 8 It is allways write fail!
Einavbs1 said:
When I try to flash a ins firmware to my Note 8 It is allways write fail!
Click to expand...
Click to collapse
It's having issues with opening a com port to phone.
So try another USB port and/or cable. Make sure Odin says that phone is recognized by Odin.
BluePhnx said:
It's having issues with opening a com port to phone.
So try another USB port and/or cable. Make sure Odin says that phone is recognized by Odin.
Click to expand...
Click to collapse
I Tried to change a port and I have the original cable.
I don't know what to do?
I need to try install other firmware?
Einavbs1 said:
I Tried to change a port and I have the original cable.
I don't know what to do?
I need to try install other firmware?
Click to expand...
Click to collapse
Is the port on phone clean?
Try another Odin version?
Which firmware you are on?
And what firmware are you trying to flash?
List the full firmware name. Eg. N950FXXU5CRK1
BluePhnx said:
It's having issues with opening a com port to phone.
So try another USB port and/or cable. Make sure Odin says that phone is recognized by Odin.
Click to expand...
Click to collapse
Look at this error now
Einavbs1 said:
Look at this error now
Click to expand...
Click to collapse
What firmware are you on and what firmware are you flashing?
BluePhnx said:
What firmware are you on and what firmware are you flashing?
Click to expand...
Click to collapse
India last firmware
Einavbs1 said:
India last firmware
Click to expand...
Click to collapse
Then that's ur issue. You can not downgrade your bootloader version from version 5 to version 4, 3,2,1.
Can't go from N950FXXU"5"CSA3 (latest firmware) to N950FXXS"1"AQK9.
You can only flash any firmware with "5" or higher # .
BluePhnx said:
Then that's ur issue. You can not downgrade your bootloader version from version 5 to version 4, 3,2,1.
Can't go from N950FXXU"5"CSA3 (latest firmware) to N950FXXS"1"AQK9.
You can only flash any firmware with "5" or higher # .
Click to expand...
Click to collapse
My Baseband version is:
N950FXXU5CRHA
Maybe I can flash Korea last firmware?
I want join the beta and I saw only India and Korea can join the beta on Note 8.
Einavbs1 said:
My Baseband version is:
N950FXXU5CRHA
Maybe I can flash Korea last firmware?
I want join the beta and I saw only India and Korea can join the beta on Note 8.
Click to expand...
Click to collapse
Not going to work for the Korean one the updat.zip is for n950f not n950n.
Try this:
Download N950FXXU5SCA3 for INS using samfirm
Use the latest Odin to flash it.
Make sure that your on N950FXXU5SCA3 after flash.
Download the update.zip from the pie beta thread.
Place it on a sd card (no folders just root directory)
Reboot into recovery and update from sd card and select update.zip file.
For you to join the beta program you have to have a phone that's from India/UK/Korea and have a SIM card that's from there and be there as well. It won't work if your outside the region with a different SIM card.
---------- Post added at 02:37 AM ---------- Previous post was at 02:29 AM ----------
I have tried to join the pie beta with my n950f XEU from UK (which beta pie is available for) but since I'm in Canada with a Canadian sim card the Samsung member app won't allow me to join because of my Canadian sim card.
So the only way to get the beta pie is to do it manually by doing the above steps.
BluePhnx said:
Not going to work for the Korean one the updat.zip is for n950f not n950n.
Try this:
Download N950FXXU5SCA3 for INS using samfirm
Use the latest Odin to flash it.
Make sure that your on N950FXXU5SCA3 after flash.
Download the update.zip from the pie beta thread.
Place it on a sd card (no folders just root directory)
Reboot into recovery and update from sd card and select update.zip file.
For you to join the beta program you have to have a phone that's from India/UK/Korea and have a SIM card that's from there and be there as well. It won't work if your outside the region with a different SIM card.
---------- Post added at 02:37 AM ---------- Previous post was at 02:29 AM ----------
I have tried to join the pie beta with my n950f XEU from UK (which beta pie is available for) but since I'm in Canada with a Canadian sim card the Samsung member app won't allow me to join because of my Canadian sim card.
So the only way to get the beta pie is to do it manually by doing the above steps.
Click to expand...
Click to collapse
I'm outside of those countries..
And I cant find the pie beta thread
I am downloading the new zip now
Einavbs1 said:
I'm outside of those countries..
And I cant find the pie beta thread
I am downloading the new zip now
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-note-8/how-to/galaxy-note-8-sm-n950f-official-oneui-t3890126
Read the first post!
BluePhnx said:
https://forum.xda-developers.com/galaxy-note-8/how-to/galaxy-note-8-sm-n950f-official-oneui-t3890126
Read the first post!
Click to expand...
Click to collapse
It is the last odin version.
I dont know what to do..
BluePhnx said:
https://forum.xda-developers.com/galaxy-note-8/how-to/galaxy-note-8-sm-n950f-official-oneui-t3890126
Read the first post!
Click to expand...
Click to collapse
Tried change COM
BluePhnx said:
https://forum.xda-developers.com/galaxy-note-8/how-to/galaxy-note-8-sm-n950f-official-oneui-t3890126
Read the first post!
Click to expand...
Click to collapse
Ok I'm sorry for alot quotes but I solved the problem I had to Start the EXE as admin.
" odin error can't open the specified file line 1892 "