Guys, i just dont know what to do.
Everything was ok, but after flash a new rom my sensor files got corrupted.
I've tried flash stock rom and wipe Dalvik, anything worked, now i flash other roms and nothing.
I saw some guides about that in other phones, they fixed it looking for sensorfiles into the motherboard and switching with right one..
i can post some guides hear, bur the fact is, i dont know how do it on N8..
I heally hope you guys can help me, i cant sent it to sams back.
Im sorry for my english.
GUIDES:
https://www.androidgadgematic.com/2012/08/how-to-fix-accelerometer-compass-revert.html
https://forum.xda-developers.com/general/help/gt-i9060i-sensors-root-t3180568
That's never happened to me before. Did you flash an incorrect model bootloader?
What model Note 8 do you have & exactly what files did you flash? I'm confused by your post, did you get it working or did you still need help to get it working?
And you should change the thread title. TWRP has nothing to do with your sensors not working.
Sent from my Note 8 using XDA Labs
shouren04 said:
That's never happened to me before. Did you flash an incorrect model bootloader?
What model Note 8 do you have & exactly what files did you flash? I'm confused by your post, did you get it working or did you still need help to get it working?
Click to expand...
Click to collapse
N950F
No im still with this broken...
I dont know for sure, if a flash a wrong bootloader, but i've tried install the stock rom and nothing works.
So, do you have some advice?
panterpink said:
N950F
No im still with this broken...
I dont know for sure, if a flash a wrong bootloader, but i've tried install the stock rom and nothing works.
So, do you have some advice?
Click to expand...
Click to collapse
Not without more info. What all exactly did you flash before your sensors stopped working?
shouren04 said:
Not without more info. What all exactly did you flash before your sensors stopped working?
Click to expand...
Click to collapse
Install TWRP, MAGISK ..
Next flashed WETA ROM- So i saw sensors problem.. but i dont now if that happen before i flash it.
Alright, so a decide came back to Stock rom, so i did it and didnt back again..
A flashed 7.1.1 ZTO ..
Now im on N950FXXU3BRA8 BOOTLOADER
AND INSTALL DRKETAN ROM
panterpink said:
Install TWRP, MAGISK ..
Next flashed WETA ROM- So i saw sensors problem.. but i dont now if that happen before i flash it.
Alright, so a decide came back to Stock rom, so i did it and didnt back again..
A flashed 7.1.1 ZTO ..
Now im on N950FXXU3BRA8 BOOTLOADER
AND INSTALL DRKETAN ROM
Click to expand...
Click to collapse
What bootloader were you on before? Were you on Nougat or Oreo before flashing Weta? What version Weta rom did you flash & did you flash Weta bootloader & modem update?
I've been using Weta rom for a long time & never had this issue so I still think it's a bootloader issue or a coincidence that your phone's hardware failed.
shouren04 said:
What bootloader were you on before? Were you on Nougat or Oreo before flashing Weta? What version Weta rom did you flash & did you flash Weta bootloader & modem update?
I've been using Weta rom for a long time & never had this issue so I still think it's a bootloader issue or a coincidence that your phone's hardware failed.
Click to expand...
Click to collapse
no i didint..
Same bootloader before flash, 7.1.1..
if this is a bootloader issue, what should i do?
panterpink said:
no i didint..
Same bootloader before flash, 7.1.1..
if this is a bootloader issue, what should i do?
Click to expand...
Click to collapse
Since you won't say what Weta version you flashed & you didn't flash Weta bootloader update, I'm assuming you flashed Oreo version of Weta as Weta rom itself doesn't include bootloader & modem.
Since you won't give more details on what you flashed exactly I don't have a clue on what you should do or if it is a bootloader issue. Maybe kernel related I don't know.
So at this point all I can suggest is that if you are on BRA8 now, flash entire BRA8 or BRB2 firmware in Odin, BL, CP, AP, & CSC. Or at the least flash BL & CP.
shouren04 said:
Since you won't say what Weta version you flashed & you didn't flash Weta bootloader update, I'm assuming you flashed Oreo version of Weta as Weta rom itself doesn't include bootloader & modem.
Since you won't give more details on what you flashed exactly I don't have a clue on what you should do or if it is a bootloader issue. Maybe kernel related I don't know.
So at this point all I can suggest is that if you are on BRA8 now, flash entire BRA8 or BRB2 firmware in Odin, BL, CP, AP, & CSC. Or at the least flash BL & CP.
Click to expand...
Click to collapse
NIce!
i will try, if i do it.. i gonna lost twrp??
thank u !
panterpink said:
NIce!
i will try, if i do it.. i gonna lost twrp??
thank u !
Click to expand...
Click to collapse
Not if you flash only BL & CP. But those won't flash kernel. If you still have the issue, trying flashing a custom kernel if you don't want to loose TWRP & reinstall.
First off, I feel there would be many more reports of this with either TWRP or Weta Mod if the issue lay there with either of them.
I have used both in the past and have always worked fine for me.
Did you follow the flashing instructions letter by letter?
Have you got the latest TWRP that works with Oreo?
Which I believe you need to flash the older version before flashing the newer TWRP via TWRP with the iso.image?
I would just flash the full stock image via Odin like others have suggested. If the phone then works fine, as it should after this, try again but just take your time doing it.
Related
As the thread states....has anyone tried to flash stock DOK2 firmware from the new MM update? I have searched and asked many questions but have not gotten a solid answer. And if no one knows or no one has tried yet, would someone who had already taken the update be willing to try flashing stock DOK2 firmware? For developmental purposes. Thanks in advance. ?
Anyone got root for Marshmallow?
viewsfromthepi said:
Anyone got root for Marshmallow?
Click to expand...
Click to collapse
Root works perfectly fine. Use SuperSu Systemless root. I believe the version number is 2.74-2. It's the latest beta if I'm not mistaken.
First use ODIN to get TWRP onto the device and then flash the supersu zip like usual.
I was thinking of just using flashfire to flash BL and modem only then install the rom..that way it doesnt overwrite recovery... bad idea ?
noob4598 said:
I was thinking of just using flashfire to flash BL and modem only then install the rom..that way it doesnt overwrite recovery... bad idea ?
Click to expand...
Click to collapse
Yes, bad idea. No shortcuts on base updates.
Sent from my SM-N910T using XDA-Developers mobile app
noob4598 said:
As the thread states....has anyone tried to flash stock DOK2 firmware from the new MM update? I have searched and asked many questions but have not gotten a solid answer. And if no one knows or no one has tried yet, would someone who had already taken the update be willing to try flashing stock DOK2 firmware? For developmental purposes. Thanks in advance. ?
Click to expand...
Click to collapse
I was able to downgrade to DOK2 but I only flashed the bootloader & modem file not the entire firmware
If you flashed BL then we are good. I wonder if the MM bootloader is like n910G.....they couldn't go from 5.1.1 to 4.4.4 but when they got 6.0.1 they were able to got back 2 steps to 4.4.4.like a magical BL unlock ha
xoxo_xdagirl91 said:
I was able to downgrade to DOK2 but I only flashed the bootloader & modem file not the entire firmware
Click to expand...
Click to collapse
What files did you use? I tried flashing the entire dok2 firmware through Odin and kept getting stuck in a bootloop. If I could just flash those 2 files that would be great.
Sent from my SM-N910T using XDA-Developers mobile app
nymikey said:
What files did you use? I tried flashing the entire dok2 firmware through Odin and kept getting stuck in a bootloop. If I could just flash those 2 files that would be great.
Sent from my SM-N910T using XDA-Developers mobile app
Click to expand...
Click to collapse
DOK2 Bootloader: https://www.androidfilehost.com/?fid=24269982087008410
DOK2 Modem: https://www.androidfilehost.com/?fid=24269982087008409
I used odin 3.11.1: http://dl.sammobile.com/Odin3-v3.11.1.zip
put the bootloader in the BL section & the modem in the CP section of odin
xoxo_xdagirl91 said:
DOK2 Bootloader: https://www.androidfilehost.com/?fid=24269982087008410
DOK2 Modem: https://www.androidfilehost.com/?fid=24269982087008409
I used odin 3.11.1: http://dl.sammobile.com/Odin3-v3.11.1.zip
put the bootloader in the BL section & the modem in the CP section of odin
Click to expand...
Click to collapse
Thanks, I'm gonna give this a try.
Sent from my SM-N910T using XDA-Developers mobile app
I have downgraded from a full PE3 to OK2. Worked fine.
Awesome...that makes me feel safer...I might try to odin nk4 later just for ships and giggles haha
does anyone know if you can downgrade from MM PE3 to KK ANK4? I know that you can't go from DOK2 to ANK4. Love firekat too much
noob4598 said:
If you flashed BL then we are good. I wonder if the MM bootloader is like n910G.....they couldn't go from 5.1.1 to 4.4.4 but when they got 6.0.1 they were able to got back 2 steps to 4.4.4.like a magical BL unlock ha
Click to expand...
Click to collapse
Someone needs to try this ASAP.
Karina Kapri said:
Someone needs to try this ASAP.
Click to expand...
Click to collapse
I had a T-mobile Note 4 (N910T) on 5.0.1 , downgraded to KitKat 4.4.4, when Lolipop 5.1.1 came out I upgraded. rooted, and then flashed custom rom Tekxodus .. phone used to restart randomly .. later discovered that once you upgrade OK2 you get locked and no longer can downgrade to KK.
later on, the phone started to give mmc error and then just died.
Lesson Learned, stay on 5.0.1 or downgrade to 4.4.4 and stay there.
I still wonder if Android 6.0.1 Locks down the downgrade process to 4.4.4. I doubt it will allow it.
DeeXii said:
I have downgraded from a full PE3 to OK2. Worked fine.
Click to expand...
Click to collapse
Ok. You just downgrade, but I have a question.
After you flashed BL and CS, you still have to flash the firmware, right? So, I have to have the firmware OK2 too, right?
Chrisayami said:
Ok. You just downgrade, but I have a question.
After you flashed BL and CS, you still have to flash the firmware, right? So, I have to have the firmware OK2 too, right?
Click to expand...
Click to collapse
im also waiting for this reply hehehe...
SeerePetrova said:
im also waiting for this reply hehehe...
Click to expand...
Click to collapse
Yea if you want everything to be OK2 but its not necessary....if you are gonna use twrp, u dont need to odin recovery....and if you are gonna use a custom rom instead of stock then you dont need to odin system...so basically anyone with twrp and a custom OS is only using BL and Modem
But i always just flash it all just to be thorough....
xoxo_xdagirl91 said:
DOK2 Bootloader: https://www.androidfilehost.com/?fid=24269982087008410
DOK2 Modem: https://www.androidfilehost.com/?fid=24269982087008409
I used odin 3.11.1: http://dl.sammobile.com/Odin3-v3.11.1.zip
put the bootloader in the BL section & the modem in the CP section of odin
Click to expand...
Click to collapse
Can i flash that with flashhire app? (Without odin) And without loose my twrp?
Thanks!
Hi guys. It's been a while since I rooted this phone because my work wouldnt allow it. Anyway I finally got it rooted (v 6.0.1) and TWRP going. I was thiking about flashing the CMRemix rom and they mention "You MUST be on the Latest Bootloader and Modem for your Carrier - D0K2 for Tmo SM-N910T". Where do I even find out if im using that? My current baseband is N910TUVSEPG2 if that helps.
kuthedude said:
Hi guys. It's been a while since I rooted this phone because my work wouldnt allow it. Anyway I finally got it rooted (v 6.0.1) and TWRP going. I was thiking about flashing the CMRemix rom and they mention "You MUST be on the Latest Bootloader and Modem for your Carrier - D0K2 for Tmo SM-N910T". Where do I even find out if im using that? My current baseband is N910TUVSEPG2 if that helps.
Click to expand...
Click to collapse
Here you go
Modem dok2
https://www.androidfilehost.com/?fid=312978532265371269
Bootloader dok2
https://www.androidfilehost.com/?fid=457095661767112946
Choose BL tab in odin to flash bootloader
Choise CP tab in odin to flash modem
Must Flash both files otherwise simcard and wifi will not work in cm13.
On cm13 first boot if sim does not work just restart device and it will work fine
Trex888 said:
Here you go
Modem dok2
https://www.androidfilehost.com/?fid=312978532265371269
Bootloader dok2
https://www.androidfilehost.com/?fid=457095661767112946
Choose BL tab in odin to flash bootloader
Choise CP tab in odin to flash modem
Must Flash both files otherwise simcard and wifi will not work in cm13.
On cm13 first boot if sim does not work just restart device and it will work fine
Click to expand...
Click to collapse
Thanks! I used it for a bit, but im still doing some tinkering around. But that definately got me going!
guys need a question. i have already upgraded my phone to this firmware (N9208XXS4CRA1). then i intstall twrp and flash custom rom. now i want to go back to stock but my back up odin flashable firmware is
N9208XXS3CQJ1_N9208OLB3CQJ1_N9208XXU3CQG2_HOME.tar. now i cant flash it coz of error. do i neeed to download the latest firmware or there is something wrong with my phone. coz i cant restore my twrp back up if i flash twrp again. hope someone can help.
pattriccio said:
guys need a question. i have already upgraded my phone to this firmware (N9208XXS4CRA1). then i intstall twrp and flash custom rom. now i want to go back to stock but my back up odin flashable firmware is
N9208XXS3CQJ1_N9208OLB3CQJ1_N9208XXU3CQG2_HOME.tar. now i cant flash it coz of error. do i neeed to download the latest firmware or there is something wrong with my phone. coz i cant restore my twrp back up if i flash twrp again. hope someone can help.
Click to expand...
Click to collapse
You cant flash a firmware with a lower bootloader number. The fifth digit from the right is the bl version. You are trying to flash a firmware with bl version 3 over you're current version 4 so just flash a firmware with version 4 and you should be good.
bsharp8 said:
You cant flash a firmware with a lower bootloader number. The fifth digit from the right is the bl version. You are trying to flash a firmware with bl version 3 over you're current version 4 so just flash a firmware with version 4 and you should be good.
Click to expand...
Click to collapse
thanks mate. problem is every firmware im downloading right now always corrupt. and very slow. but thanks anyway for the help and knowledge.
thanks mate i changed pc and got a successful download.
No problem glad you got it worked out.
Never ever try to downgrade your bootloader to go to an older rom by the way. I tried it and had to replace my phones motherboard.just fyi
successfully ..close
Are the pictures that bad? Both cameras? I do not think oreo has something to do with it, the forum would be flooded with the issue, it must be something else, check carefully
Yes, i think so, because i often take picture so i find some diffrent between android 8.0 and 7.1.1.. Dual camera often has noise.
You should be able to flash back to Nougat no problem as long as you flash Nougat FW with v3 bootloader.
shouren04 said:
You should be able to flash back to Nougat no problem as long as you flash Nougat FW with v3 bootloader.
Click to expand...
Click to collapse
@@
Ngdatdisoco said:
Can N950FXXU3CRC1 (android 8.0) downgrade to N950FXXU3BRA8 (andorid 7.1.1) ? v3 to v3?
maybe i haveto wait 7 days, now setting unlock oem in download mode still on.. and oem unlock in dev setting is hidden
Click to expand...
Click to collapse
Yes, BRA8 should work. I haven't tried for myself as I don't want to install Oreo yet but in the past I have "downgraded" fine as long as bootloader version is the same. I have seen others going back to Noguat from Oreo so it is possible.
shouren04 said:
Yes, BRA8 should work. I haven't tried for myself as I don't want to install Oreo yet but in the past I have "downgraded" fine as long as bootloader version is the same. I have seen others going back to Noguat from Oreo so it is possible.
Click to expand...
Click to collapse
but lock oem in downloadmode in my phone is on? can i flash it? or must turn off?
Ngdatdisoco said:
but lock oem in downloadmode in my phone is on? can i flash it? or must turn off?
Click to expand...
Click to collapse
Oh, now that I really don't know. OEM lock shouldn't matter whether off or on. You should be able to flash stock FW without OEM unlock on. If it's on then it should definitely work. Worse that will happen is it won't flash so it won't hurt to try.
Now whether you will loose OEM after flashing back to Noguat I don't know. I rarely flash in Odin, I only use Odin to flash TWRP, after that I do on my flashing in TWRP. My phone doesn't suffer from the 7 day thing so I don't have any experience with loosing OEM.
shouren04 said:
Oh, now that I really don't know. OEM lock shouldn't matter whether off or on. You should be able to flash stock FW without OEM unlock on. If it's on then it should definitely work. Worse that will happen is it won't flash so it won't hurt to try.
Now whether you will loose OEM after flashing back to Noguat I don't know. I rarely flash in Odin, I only use Odin to flash TWRP, after that I do on my flashing in TWRP. My phone doesn't suffer from the 7 day thing so I don't have any experience with loosing OEM.
Click to expand...
Click to collapse
thanks, i will try,some pp said cant flash anything if oem lock is on. >.<
Ngdatdisoco said:
thanks, i will try,some pp said cant flash anything if oem lock is on. >.<
Click to expand...
Click to collapse
Ah I see. Just try with it off. I don't think you need it on to flash official firmware. But I know I have flashed official firmware fine with it on. I haven't turned it off since I first turned it on the day I got my phone.
shouren04 said:
Ah I see. Just try with it off. I don't think you need it on to flash official firmware. But I know I have flashed official firmware fine with it on. I haven't turned it off since I first turned it on the day I got my phone.
Click to expand...
Click to collapse
I will try downgrade v3 to v3, i tried downgrade v3 to v2 with oem lock is on, odin failed.. @@. Thanks sir
Ngdatdisoco said:
I will try downgrade v3 to v3, i tried downgrade v3 to v2 with oem lock is on, odin failed.. @@. Thanks sir
Click to expand...
Click to collapse
Yes v3 to v2 will fail no matter what regardless if oem is on. Can't downgrade bootloader.
I flashed back 7.1.1 successfully, but I flashed back to combination firmware first, then flashed to 7.1.1
hinnn said:
I flashed back 7.1.1 successfully, but I flashed back to combination firmware first, then flashed to 7.1.1
Click to expand...
Click to collapse
whats your phone? n950f international ? u successfully downgrade android 8 to 7.1.1?? wowww
can u show me step by step? thanks
thanks
shouren04 said:
Yes v3 to v2 will fail no matter what regardless if oem is on. Can't downgrade bootloader.
Click to expand...
Click to collapse
v3 to v3 worked.. i am flashing , @@
Ngdatdisoco said:
whats your phone? n950f international ? u successfully downgrade android 8 to 7.1.1?? wowww
can u show me step by step? thanks
Click to expand...
Click to collapse
Yes, N950F
Download COMBINATION_FA71_N950FXXU3ARA5_CL12991683_QB16751804_REV00_user_mid_noship.tar.md5
Search here or google,
Flash to this rom,
Then flash to your 7.1.1
Or just try to flash to 7.1.1 directly, should works because it's not test firmware, you are allowed to flash back to 7.1.1
Ngdatdisoco said:
v3 to v3 worked.. i am flashing , @@
Click to expand...
Click to collapse
:good:
shouren04 said:
:good:
Click to expand...
Click to collapse
successfully !!!
OEM Unlock can be on or off when you use odin to flash firmware. It doesn't matter either way. OEM Unlock is only when flashing custom stuff.
You really should not need to use Combination Firmware when downgrading from OREO to NOUGAT as long as you are using the right bootloader. BRA8 I thnk is the is the most recent NOUGAT and you can just flash that bootloader and you should be fine. I did it and it wasn't a problem.
Hi, I had a problem where I flashed a custom ROM and lost my IMEI / baseband - none of the SIMs worked.
I fixed it by flashing the Devbase ROM from this forum. The only issue is, whenever I flash any other ROM, I lose my IMEI / Baseband, including the stock from SamMobile.
As the battery is so awful on One UI V1 I'd love to be able to go back to stock so I can get the pending One UI update.
Any ideas?
Thanks
Jamie
pedro_mcdodge said:
Hi, I had a problem where I flashed a custom ROM and lost my IMEI / baseband - none of the SIMs worked.
I fixed it by flashing the Devbase ROM from this forum. The only issue is, whenever I flash any other ROM, I lose my IMEI / Baseband, including the stock from SamMobile.
As the battery is so awful on One UI V1 I'd love to be able to go back to stock so I can get the pending One UI update.
Any ideas?
Thanks
Jamie
Click to expand...
Click to collapse
because uve not updated your baseband(modem) and or bootloader are too old or too new compared to the rom you are on. but usualy its too old.
often people flash roms left and right and never ever think about updating BL and CP. they eventually will need to get those updated as well, not just the rom. its the users responsibility to manually flash the aforementioned files with Odin.
so all in all flash november 2019 firmware.( bl.md5 and cp.md5) you wint loose data by flashing those. nor do you need to reroot/twrp.
bober10113 said:
because uve not updated your baseband(modem) and or bootloader are too old or too new compared to the rom you are on. but usualy its too old.
often people flash roms left and right and never ever think about updating BL and CP. they eventually will need to get those updated as well, not just the rom. its the users responsibility to manually flash the aforementioned files with Odin.
so all in all flash november 2019 firmware.( bl.md5 and cp.md5) you wint loose data by flashing those. nor do you need to reroot/twrp.
Click to expand...
Click to collapse
Thank you for getting back to me Bober, I'll give this a go today.
bober10113 said:
because uve not updated your baseband(modem) and or bootloader are too old or too new compared to the rom you are on. but usualy its too old.
often people flash roms left and right and never ever think about updating BL and CP. they eventually will need to get those updated as well, not just the rom. its the users responsibility to manually flash the aforementioned files with Odin.
so all in all flash november 2019 firmware.( bl.md5 and cp.md5) you wint loose data by flashing those. nor do you need to reroot/twrp.
Click to expand...
Click to collapse
Hi, I just flashed the Bl & Cp. Unfortunately I now have no SIM access, no IMEI and baseband
Any ideas?
pedro_mcdodge said:
Hi, I just flashed the Bl & Cp. Unfortunately I now have no SIM access, no IMEI and baseband
Any ideas?
Click to expand...
Click to collapse
its important to state:
what did you flash( revision number)
what rom are you on(base rev. number)
bober10113 said:
its important to state:
what did you flash( revision number)
what rom are you on(base rev. number)
Click to expand...
Click to collapse
Hi, I am on Devbase 6.0 (Pie) & I flashed 14.11.19 UK BTU firmware N960FOXM4CSJ1 BL & CL with Odin.
I reflashed Devbase again from TWRP and the phone is working again, but unable to get on any other ROM.
Thanks
Jamie
pedro_mcdodge said:
Hi, I am on Devbase 6.0 (Pie) & I flashed 14.11.19 UK BTU firmware N960FOXM4CSJ1 BL & CL with Odin.
I reflashed Devbase again from TWRP and the phone is working again, but unable to get on any other ROM.
Thanks
Jamie
Click to expand...
Click to collapse
when you flash roms, have you made a habit to wipe before?
try to go to wipe menu and do factory wipe then flash a rom.