Database Develop

EDL Mode not working? Need urgent help!

Hi guys,
Recently did a big ****up with my device. Tried to unlock_critical which said already unlocked but wasnt in order to convert to 6x. Tried to oem lock again and im now locked out. Device doesnt boot and cant flash anything via fastboot.
I already figured i have to go to edl mode for flashing stock software, have opened my device now and tried to short the edl pins as explained in youtube videos.
However, no sign of this working! no light, nothing!
Im using manjaro linux which doesnt recognize the device only via adb or fastboot.
Already tried using virtualbox for miflash but i cant get the usb port to work with it.
Can you help me please?

In my case for EDL, i only need to unlock critical, then power + volume up

hafizhlf said:
In my case for EDL, i only need to unlock critical, then power + volume up
Click to expand...
Click to collapse
unlock critical does not work since the bootloader is locked and oem toggle cant be turned on since theres wrong software
Sent from my Samsung SM-T835 using XDA Labs

dr460nf1r3 said:
unlock critical does not work since the bootloader is locked and oem toggle cant be turned on since theres wrong software
Click to expand...
Click to collapse
Can you boot to fasboot and unlock bootloader, then critical_unlock

hafizhlf said:
Can you boot to fasboot and unlock bootloader, then critical_unlock
Click to expand...
Click to collapse
By flashing unlock? failed flashing unlock is not allowed..
Sent from my Samsung SM-T835 using XDA Labs

you can to find a windows laptop or pc from your friends for a while ?? I do not think you can run correctly edl mode + all the necessary tools & files from Linux,after test points...
the device must be have all the necessary drivers (first disable driver signature) fastboot etc as you know...
https://en.miui.com/thread-3524265-1-1.html
_ https://mega.nz/#!x6BkXY5A!hx8SXoBwd4-fW1UkZ1poHc7p-MFDaQ85FYH7Yk8bLZ8 (fastboot edl)
_ https://mega.nz/#!EqJwTIzB!KJF3CldYq_u7KylaL0iO6rs05RWs2_dcUfaENjJcDpU (QDLoader HS-USB Driver)
[The above driver is needed to be able to flash fastboot rom in EDL mode, with the MiFlash Tool on Xiaomi devices with Qualcomm processor and locked bootloader]
__test points > edl mode (edl no needs necessary unlocked BT) > miflash tool > fastboot rom : http://en.miui.com/download-353.html
sry for english

daitalos said:
you can to find a windows laptop or pc from your friends for a while ?? I do not think you can run correctly edl mode + all the necessary tools & files from Linux,after test points...
the device must be have all the necessary drivers (first disable driver signature) fastboot etc as you know...
https://en.miui.com/thread-3524265-1-1.html
_ https://mega.nz/#!x6BkXY5A!hx8SXoBwd4-fW1UkZ1poHc7p-MFDaQ85FYH7Yk8bLZ8 (fastboot edl)
_ https://mega.nz/#!EqJwTIzB!KJF3CldYq_u7KylaL0iO6rs05RWs2_dcUfaENjJcDpU (QDLoader HS-USB Driver)
[The above driver is needed to be able to flash fastboot rom in EDL mode, with the MiFlash Tool on Xiaomi devices with Qualcomm processor and locked bootloader]
__test points > edl mode (edl no needs necessary unlocked BT) > miflash tool > fastboot rom : http://en.miui.com/download-353.html
sry for english
Click to expand...
Click to collapse
Yes ill have access to one in a few days. thanks again for pointing out and giving those links so i dont have to search for them.
annoying as hell not to have access to my phone right now :/
Sent from my Samsung SM-T835 using XDA Labs

dr460nf1r3 said:
Yes ill have access to one in a few days. thanks again for pointing out and giving those links so i dont have to search for them.
annoying as hell not to have access to my phone right now :/
Sent from my Samsung SM-T835 using XDA Labs
Click to expand...
Click to collapse
I hope you can fix the device
take & this tool : https://mega.nz/#!cr4SUIqY!Rzlftk2OFun8XIkNQb2aXRtP7-t3f4DB92vMIl90pgw
(this is for xiaomi & not only...this tool can any work for you....for example : disable drivers signature,Install all drivers & puts the device on EDL mode ....Just,read & follow the instructions.Open this link in chrome browser & read carefully with translate help, is in Greek Language :
https://xiaomi-miui.gr/community/in...τά-Xiaomi-σε-όλα-τα-Windows-x64-x86/?pageNo=1 )
Gl

I have the same issue, fastboot mode is useless to flash anything. Booting with adb into edl mode reboots phone normally.

Getting disconnected after a half minute in EDL mode.
Hello guys, I'm having a big problem, some day earlier the A2 started to bootloop and fastboot, adb wasn't working.
So I opened the mi A2, disconnected the battery cable and booted in edl mode but after 20 sec it got disconnected and again I short it and boot in edl and it disconnecting.
A help would be amazing. Thanks in advance.

Rm789 said:
Getting disconnected after a half minute in EDL mode.
Hello guys, I'm having a big problem, some day earlier the A2 started to bootloop and fastboot, adb wasn't working.
So I opened the mi A2, disconnected the battery cable and booted in edl mode but after 20 sec it got disconnected and again I short it and boot in edl and it disconnecting.
A help would be amazing. Thanks in advance.
Click to expand...
Click to collapse
I'm in your position now. It reboots even in edl mode. How did you fix this?

hello guys
my xiaomi redmi 9a got hard bricked doe not turn on and i cant enter recovery or fastboot when i enter to edl mode does not showing up on my desktop please reply me

Help unbricking xiaomi mi 9t pro think its hard bricked

Hi i unlocked my bootloader earlier today, worked fine. Got twrp, fine. then tried to copy roms to my phone to flash but couldn't see the phone so rebooted, then twrp wouldn't load was stuck in fastboot.
So tried to miflash back to stock rom and now device is not even showing fastboot just black screen. Can see qualcomm hs-usb qdloader 9008 in device manager when device is connected.
What files do i need to unbrick? i think when i went back to recovery i installed davinci and not raphael. Would this have bricked? How to unbrick? I need EDL?
Model is: M1903F11G
Any help, thanks.

ldyte3 said:
Hi i unlocked my bootloader earlier today, worked fine. Got twrp, fine. then tried to copy roms to my phone to flash but couldn't see the phone so rebooted, then twrp wouldn't load was stuck in fastboot.
So tried to miflash back to stock rom and now device is not even showing fastboot just black screen. Can see qualcomm hs-usb qdloader 9008 in device manager when device is connected.
What files do i need to unbrick? i think when i went back to recovery i installed davinci and not raphael. Would this have bricked? How to unbrick? I need EDL?
Model is: M1903F11G
Any help, thanks.
Click to expand...
Click to collapse
Sadly Yes same happen to my friend
u need EDL mode + authurized xiaomi account to flash the fastboot rom

Antidote03 said:
Sadly Yes same happen to my friend
u need EDL mode + authurized xiaomi account to flash the fastboot rom
Click to expand...
Click to collapse
Ok thanks, i try miflash but get error cannot get hello packet.
how do i get EDL mode?

You flashed mi 9t recovery on mi 9t pro?

ldyte3 said:
Hi i unlocked my bootloader earlier today, worked fine. Got twrp, fine. then tried to copy roms to my phone to flash but couldn't see the phone so rebooted, then twrp wouldn't load was stuck in fastboot.
So tried to miflash back to stock rom and now device is not even showing fastboot just black screen. Can see qualcomm hs-usb qdloader 9008 in device manager when device is connected.
What files do i need to unbrick? i think when i went back to recovery i installed davinci and not raphael. Would this have bricked? How to unbrick? I need EDL?
Model is: M1903F11G
Any help, thanks.
Click to expand...
Click to collapse
ldyte3 said:
Ok thanks, i try miflash but get error cannot get hello packet.
how do i get EDL mode?
Click to expand...
Click to collapse
u need to open ur device and do test point ... search in youtube for k20 pro test point

Antidote03 said:
u need to open ur device and do test point ... search in youtube for k20 pro test point
Click to expand...
Click to collapse
no way man, its new phone, how i can do it without opening?

Redmi 4 (Santoni) bricked. Please help.

I unlocked my redmi 4 (Santoni) boot loader and flashed pixel experience ROM (https://mega.nz/#F!INZgnAZI!9fuWhfCuazOO5YPBjxGlmA). It was working fine for a few days (Small heating issue was there). Then one day while i was charging the phone the phone turned off and never turn back on. When i try to switch on the mi logo flashes for a split second and then turns off. I tried to get into recovery but couldn't.
I can get into fastboot mode. I tried flashing the phone using Mi flash tool and fastboot rom. But it shows an error "flash tz error". When i tried an old version of mi flash tool i get the "Unspecified error (0x80004005: FAILED (remote: Critical partition flashing is not allowed))
Please Help.....

can you access the twrp?

foneiamone said:
can you access the twrp?
Click to expand...
Click to collapse
No. I can only access fastboot.

Somebody please help...

unbrick
u can get to edl fastboot with testpoints.
redmi 4x edl fastboot
in edl fastboot flashing should work again :angel:

PierceB said:
u can get to edl fastboot with testpoints.
redmi 4x edl fastboot
in edl fastboot flashing should work again :angel:
Click to expand...
Click to collapse
Dont know how to do that. But i saw some tutorials on how to. Gonna try it. Thank you for the suggestion.

jaseemharry said:
Dont know how to do that. But i saw some tutorials on how to. Gonna try it. Thank you for the suggestion.
Click to expand...
Click to collapse
Did already share a description! https://forum.xda-developers.com/showpost.php?p=74818435&postcount=3 Or U can buy a deepflash cable this should also work.

jaseemharry said:
No. I can only access fastboot.
Click to expand...
Click to collapse
Have you tried installing TWRP via fastboot?

I had the same exact problem, i put my phone on charge & when i came back to check it was switched off. It wouldn't turn on except the mi logo. I tried to flash through fastboot turns out my bootloader was re-locked for some reason. I had to re-unlock it then proceed on to fash fastboot miui rom. Check if your bootloader is locked or not.

foneiamone said:
Have you tried installing TWRP via fastboot?
Click to expand...
Click to collapse
obstinate_penguin said:
I had the same exact problem, i put my phone on charge & when i came back to check it was switched off. It wouldn't turn on except the mi logo. I tried to flash through fastboot turns out my bootloader was re-locked for some reason. I had to re-unlock it then proceed on to fash fastboot miui rom. Check if your bootloader is locked or not.
Click to expand...
Click to collapse
This is a good idea! Probably u first try to install trwp in fastboot mode. If this doesn't work try to unlock bootloader again and then install trwp.
When all these Option doesn't work u still can open the phone and use edl fastboot mode to flash miui again.

jaseemharry said:
I unlocked my redmi 4 (Santoni) boot loader and flashed pixel experience ROM (https://mega.nz/#F!INZgnAZI!9fuWhfCuazOO5YPBjxGlmA). It was working fine for a few days (Small heating issue was there). Then one day while i was charging the phone the phone turned off and never turn back on. When i try to switch on the mi logo flashes for a split second and then turns off. I tried to get into recovery but couldn't.
I can get into fastboot mode. I tried flashing the phone using Mi flash tool and fastboot rom. But it shows an error "flash tz error". When i tried an old version of mi flash tool i get the "Unspecified error (0x80004005: FAILED (remote: Critical partition flashing is not allowed))
Please Help.....
Click to expand...
Click to collapse
No big problem just go in edl mode
Search how to go in edl Redmi 4 in Google
Problem is your boot loader is locked

Harshad patel R said:
No big problem just go in edl mode
Search how to go in edl Redmi 4 in Google
Problem is your boot loader is locked
Click to expand...
Click to collapse
but he already unlocked his bootloader before so it should be easier to unlock in again and then flash whatever he wants...

PierceB said:
but he already unlocked his bootloader before so it should be easier to unlock in again and then flash whatever he wants...
Click to expand...
Click to collapse
One time fail in flashing = locked boot loader
Or for unlocking bootloader from official (easy) need live mobile not dead

foneiamone said:
Have you tried installing TWRP via fastboot?
Click to expand...
Click to collapse
Tried but failed. Boot loader was locked again somehow.

PierceB said:
This is a good idea! Probably u first try to install trwp in fastboot mode. If this doesn't work try to unlock bootloader again and then install trwp.
When all these Option doesn't work u still can open the phone and use edl fastboot mode to flash miui again.
Click to expand...
Click to collapse
Tried unlocking boot loader and was not successful because the phone was bricked. My only option was to use edl test point. Now i installed miui 11. (Aprart from some minor bugs which can be eliminated by reflashing some other roms) Thank you guys. Now my phone is successfully unbricked.

For somebody who is having the same issues,
My phone (Redmi 4_Santoni) was completely bricked. The only thing i can access was fastboot by pressing the volume down + Power button combination. But i could not install twrp or any other recovery because my boot loader was locked. I got it fixed completely with the help of you guys (Thanks again) and i want to share the procedure i went through.
Condition: Completely bricked with only fastboot access, Locked bootloader.
I tried this video (https://www.youtube.com/watch?v=j27x5iJSS40) but failed because i could not access recovery. So my only solution was to use edl test point flashing. I followed this guide https://forum.xda-developers.com/showpost.php?p=74818435&postcount=3. It was very easy to do. But in the device manager (Press Windows key + R and then type devmgmt.msc and press enter) instead of showing "Qualcomm HS-USB QDloader 9008", the device is shown as "Qualcomm HS-USB Diagnostics 900E". The problem was you have to plug in in USB cable while the test points is being connected with a pair of tweezers or a paperclip as shown in the link above.
Make sure you already downloaded the latest mi flash tool from here https://xiaomiflashtool.com/ and download fast boot rom from the official website. (Go to https://en.miui.com/ Click rom downloads. Click flashing guide. Download the fastboot rom from there for your device.) Now flash your device using mi flash tool and voila. your phone is unbricked.
Thank you guys..

mi a2 stuck in edl state

My mi a2 stuck in edl state any one help me.... First i'm trying to flash miui 10.3.2.0 (mi 6x) on mi a2 in edl mode.... i flashed successfully...then i start my device it starts and suddenly go in edl state. i can't go fastboot.So, please help friends, i'm not able to go mi service center at this time, all are lockdown in home. plz help:crying::crying::crying: and sry for my english

The device is identified on the computer, if not, you will have to disassemble it, and make a test point

jeangraff30 said:
The device is identified on the computer, if not, you will have to disassemble it, and make a test point
Click to expand...
Click to collapse
Yes bro, device is identified in qc Hs 9008 but i can't flash roms....it asks edl authorisation... If i try testpoint method it asks edl authorization or not????

ajithkumarcm007 said:
Yes bro, device is identified in qc Hs 9008 but i can't flash roms....it asks edl authorisation... If i try testpoint method it asks edl authorization or not????
Click to expand...
Click to collapse
https://miui.blog/mi-6x/unbrick-mi-6x-wayne/
you have ARB 4 triggered

KevMetal said:
https://miui.blog/mi-6x/unbrick-mi-6x-wayne/
you have ARB 4 triggered
Click to expand...
Click to collapse
thank you, that worked wonders

General One Time Free log in to MSM only for Oneplus 10 pro

Here is free log in info . Not sure how long it will last ...you must hurry...lol . You have to follow what I say . First need to downloader loader v4.1.7.2 heres the link .
https://www.gaprologin.com/download
Now you need to find your file needed to unbrick .
You need Qualcomm drivers install . Open up device manger , put phone in edl mode.
Under ports you should see your phone show up " Qualcomm HS-USB QDLoader 9008 (COM?) what ever comport you in. once you have all that done ...Next open up loader v4.1.7.2 .
Here is a must do or wont work ... where it says " In Company" change to India and leave second line ASY/Changan
Now enter this info
INOPTP000669
ii53JC&x&^
000000
Loader will open , next Open OFP on loader. Find your file . Or drag and paste it. " Hit start ". Have all three buttons pushed in on phone and plug into USB . should start to flash
Have fun until it expires

You can try flashing your OP 11 ...DONT DO IT .... need different loader

Not working, it does not detect the device even with windows in test mode.
Log shows this:
2023/03/07 22:59:15][0x35a0][op_device_scan_connected_devices:436] [opdevice][95BDCFF8] [COM4] INFO: Device connection detected.
[2023/03/07 22:59:15][0x35a0][oplus_device_manager_notify:48] [opdevice][FTGUIDev] Notifing new device information to 3 listeners.
[2023/03/07 22:59:15][0x35a0][qcom_flash_agent_device_callback:4630] [FTGUIDev] Device manager is not activated. Ignore. (Device Name: Qualcomm HS-USB QDLoader 9008 (COM4))
[2023/03/07 22:59:15][0x35a0][op_device_scan_connected_devices:445] [opdevice] scan port stop
[2023/03/07 22:59:19][0x3584][WndProc:156] [opdevice] receive WM_DEVICECHANGE wParam: 7
[2023/03/07 22:59:19][0x3584][WndProc:170] [opdevice] receive WM_DEVICECHANGE lParam NULL
[2023/03/07 22:59:19][0x3584][WndProc:180] [opdevice] not DBT_DEVICEREMOVECOMPLETE, quit
[2023/03/07 22:59:19][0x3584][WndProc:156] [opdevice] receive WM_DEVICECHANGE wParam: 7
[2023/03/07 22:59:19][0x3584][WndProc:170] [opdevice] receive WM_DEVICECHANGE lParam NULL
[2023/03/07 22:59:19][0x3584][WndProc:180] [opdevice] not DBT_DEVICEREMOVECOMPLETE, quit
[2023/03/07 22:59:27][0x2fd0][OpFlashLogManager:rint:24] [UI] {
"Name": "IDC_SYSLINK_OPEN_CUR_LOG",
"Value": 10007
}

Dude it working

Canuck Knarf said:
Dude it working
Click to expand...
Click to collapse
Login works, but it doesn't detect the device.. is there any tricks ?

zopostyle said:
Login works, but it doesn't detect the device.. is there any tricks ?
Click to expand...
Click to collapse
Yeah you need the right ofp file with out that login info ...loader dont work

Canuck Knarf said:
Yeah you need the right ofp file with out that login info ...loader dont work
Click to expand...
Click to collapse
I already have. It's not detect the com3

zopostyle said:
I already have. It's not detect the com3
Click to expand...
Click to collapse
Once the loader open, lick on Open OFP find your file . another part of loader will pop up click ok ...that will load your file ...hit start ...push all three buttons and plug into USB

zopostyle said:
I already have. It's not detect the com3
Click to expand...
Click to collapse
try another port..and dose it show up in device manager under ports...? in edl mode

Same results, tried different port, different cable...

zopostyle said:
Same results, tried different port, different cable...
Click to expand...
Click to collapse
you have to hit start first...then hold all three button and plug in should bring up starting to download once edl pop up in device manager

Canuck Knarf said:
you have to hit start first...then hold all three button and plug in should bring up starting to download once edl pop up in device manager
Click to expand...
Click to collapse
Hum that did the trick. But now I get this error

zopostyle said:
Hum that did the trick. But now I get this error
Click to expand...
Click to collapse
do it again

Canuck Knarf said:
do it again
Click to expand...
Click to collapse
Same thing.

zopostyle said:
Same thing.
Click to expand...
Click to collapse
Is it hard bricked..??

Canuck Knarf said:
Is it hard bricked..??
Click to expand...
Click to collapse
Yes, I have to use the edl test point to it to enter in EDL Mode. Fastboot enhanced bricked it.

Im going to try it on my oneplus 10 pro NE2210..see if a problem with it

Canuck Knarf said:
Im going to try it on my oneplus 10 pro NE2210..see if a problem with it
Click to expand...
Click to collapse
I've also tried different ofp files, ne2210, ne2213 and ne2215 all stops at VIP.

zopostyle said:
I've also tried different ofp files, ne2210, ne2213 and ne2215 all stops at VIP.
Click to expand...
Click to collapse
OK I'm flashing mine rate now

Im going to give you another loader