Database Develop

lg l90 405 is believed to be 410 dual sim

hi to all guys, I would like to draw your attention to what happened to me, and possibly know how to restore.
I am owner of a lg l90 model d405n, wanting to unlock the bootloader I used an application that I would have to just unlock the bootloader and install a modified recovery.
Actually 'cell after this hack is pretty much dead, he would not turn either.
I started looking for various tools and various programs in vain, the cell showed no signs of life.
Then, now giving it up for lost, I tried to go for broke, I low-level formatted, and then with an application (umbrick) I could flesciare boot and everything else. Now the cell was lit and was also in mode 'upgrade download.
I downloaded the firmware of KDZ 405 and I tried to use flash tool but the procedure is always blocked to 2%, giving an error.
With the tool of 'LG blatantly that I discovered the phone was identified as d410, exhausted by the various trials do not go into port I wanted to download the KDZ model 410d and, as if by magic, flash tool worked! I installed the latest version and the phone works wonders!
So now I have a cell phone with firmware that is not his (among other things the 410d is also dual sim).
I would like to restore its system orifginale, that of the 405, but I'm afraid to do other **** ....
I hope someone can help me out

sebasrul21 said:
hi to all guys, I would like to draw your attention to what happened to me, and possibly know how to restore.
I am owner of a lg l90 model d405n, wanting to unlock the bootloader I used an application that I would have to just unlock the bootloader and install a modified recovery.
Actually 'cell after this hack is pretty much dead, he would not turn either.
I started looking for various tools and various programs in vain, the cell showed no signs of life.
Then, now giving it up for lost, I tried to go for broke, I low-level formatted, and then with an application (umbrick) I could flesciare boot and everything else. Now the cell was lit and was also in mode 'upgrade download.
I downloaded the firmware of KDZ 405 and I tried to use flash tool but the procedure is always blocked to 2%, giving an error.
With the tool of 'LG blatantly that I discovered the phone was identified as d410, exhausted by the various trials do not go into port I wanted to download the KDZ model 410d and, as if by magic, flash tool worked! I installed the latest version and the phone works wonders!
So now I have a cell phone with firmware that is not his (among other things the 410d is also dual sim).
I would like to restore its system orifginale, that of the 405, but I'm afraid to do other **** ....
I hope someone can help me out
Click to expand...
Click to collapse
Did you still have your stock bootloader backup?

neverdies said:
Did you still have your stock bootloader backup?
Click to expand...
Click to collapse
unfortunately no

Stock bootloader (aboot and abootb) can be retrieved from your model KDZ. Every partition, except modemst1 & 2 can be re-flashed from the KDZ.
But the bootloader alone won't do anything, you must flash the entire bootstack of D405n, enter in Donwload Mode again and LG Flash Tool will allow you to flash the entire KDZ again in Emergency Mode without errors.
If you IMEI was lost or changed, it can be restored with other programs after.

F. Gacrux said:
Stock bootloader (aboot and abootb) can be retrieved from your model KDZ. Every partition, except modemst1 & 2 can be re-flashed from the KDZ.
But the bootloader alone won't do anything, you must flash the entire bootstack of D405n, enter in Donwload Mode again and LG Flash Tool will allow you to flash the entire KDZ again in Emergency Mode without errors.
If you IMEI was lost or changed, it can be restored with other programs after.
Click to expand...
Click to collapse
I thank you for the reply but unfortunately being very inexperienced I would need a guide more ' detailed . Excuse my English ( Google translation )

sebasrul21 said:
I thank you for the reply but unfortunately being very inexperienced I would need a guide more ' detailed . Excuse my English ( Google translation )
Click to expand...
Click to collapse
the premise that no sd card , I have to flash aboot ? adb push aboot.bin ? what are the steps for not briccarlo again ?

sebasrul21 said:
I thank you for the reply but unfortunately being very inexperienced I would need a guide more ' detailed . Excuse my English ( Google translation )
Click to expand...
Click to collapse
Answer so I can give you the proper response :
- Rooted?
- Unlocked bootloader?
- Custom recovery (twrp)?
- Variant model and country.
- Carrier model (if yes, which carrier)?

F. Gacrux said:
Answer so I can give you the proper response :
- Rooted?
- Unlocked bootloader?
- Custom recovery (twrp)?
- Variant model and country.
- Carrier model (if yes, which carrier)?
Click to expand...
Click to collapse
rooted yes
unlock bootloader I think not , how does a SEE?
custom recovery no
the phone is a lg d405n but now has become lg d410 dual sim version sw v20 - op1 - hq version Android 5.0.2 Italy no carrier

There is no way to know if the bootloader is unlocked, unless you make aboot partition image and hash check to compare with the original bootloader.
You have first to flash the hacked bootloader (aboot), since you don't know if it's unlocked, it won't hurt to flash again.
First enable USB debugging, at this point I assume you know how to do this.
Download the hacked aboot for D405n v20a:
http://www.mediafire.com/download/bn39rz7ojtosqm3/D405n_v20a_patched_aboot.zip (taken from this thread: http://forum.xda-developers.com/lg-l90/development/recovery-twrp2-7-1-0lgl90w7xxshoxx-t2826150)
Extract the zip and copy aboot.bin to the root of your sdcard. Open android terminal ou adb, take su permission and allow it on your phone screen, flash the hacked bootloader with:
If you copied to the external microSD: dd if=/storage/external_SD/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot
If you copied to the internal sd: dd if=/sdcard/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot
Now flash custom recovery. Download http://forum.xda-developers.com/devdb/project/dl/?id=13334 (taken from the same thread).
Copy TWRP_2.8.7.0_270615_L90.img to the root of your sdcard. To make things easier, rename it to recovery.img. Take su permission and flash with adb or android terminal with:
If you copied to the external microSD: dd if=/storage/external_SD/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
If you copied to the internal sd: dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Now reboot into twrp custom recovery, you can either send reboot recovery command in adb shell or terminal, or with your phone off, hold VOL - and PWR button, when lg logo appears, release and hold PWR button again until a blank screen appears, select YES twice (navigate with VOL buttons and PWR to select). Since now you are on custom recovery, twrp will boot instead a factory reset routine.
Download your D405n bootstack: https://www.androidfilehost.com/?fid=24052804347759484 (taken from this thread: http://forum.xda-developers.com/lg-l90/development/bootstack-kk-l-l90-t3118632)
Copy to your sdcard (do not extract the file). In TWRP recovery, select INSTALL and flash the zip.
Download your italy D405n v20a lollipop kdz: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW932KU032N9A1T29B55QPQ/D405n20a_00.kdz
Follow this thread to flash with LG Flash Tool (if you already have usb drivers installed, start at step 5): http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
If you face force closes after the first boot, do a factory reset (VOL- and PWR button, like I described before, but since now you are all stock, factory reset will be applied).
Now you are 100% on your italy d405n v20a lollipop.

F. Gacrux said:
There is no way to know if the bootloader is unlocked, unless you make aboot partition image and hash check to compare with the original bootloader.
You have first to flash the hacked bootloader (aboot), since you don't know if it's unlocked, it won't hurt to flash again.
First enable USB debugging, at this point I assume you know how to do this.
Download the hacked aboot for D405n v20a:
http://www.mediafire.com/download/bn39rz7ojtosqm3/D405n_v20a_patched_aboot.zip (taken from this thread: http://forum.xda-developers.com/lg-l90/development/recovery-twrp2-7-1-0lgl90w7xxshoxx-t2826150)
Extract the zip and copy aboot.bin to the root of your sdcard. Open android terminal ou adb, take su permission and allow it on your phone screen, flash the hacked bootloader with:
If you copied to the external microSD: dd if=/storage/external_SD/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot
If you copied to the internal sd: dd if=/sdcard/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot
Now flash custom recovery. Download http://forum.xda-developers.com/devdb/project/dl/?id=13334 (taken from the same thread).
Copy TWRP_2.8.7.0_270615_L90.img to the root of your sdcard. To make things easier, rename it to recovery.img. Take su permission and flash with adb or android terminal with:
If you copied to the external microSD: dd if=/storage/external_SD/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
If you copied to the internal sd: dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Now reboot into twrp custom recovery, you can either send reboot recovery command in adb shell or terminal, or with your phone off, hold VOL - and PWR button, when lg logo appears, release and hold PWR button again until a blank screen appears, select YES twice (navigate with VOL buttons and PWR to select). Since now you are on custom recovery, twrp will boot instead a factory reset routine.
Download your D405n bootstack: https://www.androidfilehost.com/?fid=24052804347759484 (taken from this thread: http://forum.xda-developers.com/lg-l90/development/bootstack-kk-l-l90-t3118632)
Copy to your sdcard (do not extract the file). In TWRP recovery, select INSTALL and flash the zip.
Download your italy D405n v20a lollipop kdz: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW932KU032N9A1T29B55QPQ/D405n20a_00.kdz
Follow this thread to flash with LG Flash Tool (if you already have usb drivers installed, start at step 5): http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
If you face force closes after the first boot, do a factory reset (VOL- and PWR button, like I described before, but since now you are all stock, factory reset will be applied).
Now you are 100% on your italy d405n v20a lollipop.
Click to expand...
Click to collapse
thank you so much I immediately start work hoping to do no harm

sebasrul21 said:
thank you so much I immediately start work hoping to do no harm
Click to expand...
Click to collapse
perdona un altra cosa, io in questo momento non uso schede microsd, come cambia questa: "if you copied to the external microSD: dd if=/storage/external_SD/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot
If you copied to the internal sd: dd if=/sdcard/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot"

sebasrul21 said:
perdona un altra cosa, io in questo momento non uso schede microsd, come cambia questa: "if you copied to the external microSD: dd if=/storage/external_SD/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot
If you copied to the internal sd: dd if=/sdcard/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot"
Click to expand...
Click to collapse
forgive one other thing , I do not at this time use cards microSD , as changes this

I gave you the two options, to copy the necessary files to microSD or internal memory, and what part you didn't understand?
If you don't use microSD, you must use the internal SD command (If you copied to the internal sd: dd if=/sdcard/... etc).
In android, both storage is called SD, the internal one that comes with the phone is the internal SD (sdcard0, media, sdcard, etc), the other one that you stick in the phone is the external SD (external_SD).

sebasrul21 said:
thank you so much I immediately start work hoping to do no harm
Click to expand...
Click to collapse
I run everything perfectly but in the end , When I go to run the flash tool gives me Error
"upgrade because of error ...
lg mobile support tool detects : sw : D41020A LG V500 version sw : V50020F are AVAILABLE agggiornamenti :crying:

sebasrul21 said:
I run everything perfectly but in the end , When I go to run the flash tool gives me Error
"upgrade because of error ...
lg mobile support tool detects : sw : D41020A LG V500 version sw : V50020F are AVAILABLE agggiornamenti :crying:
Click to expand...
Click to collapse
flash tool: Wait until software extraction is complete. stop

sebasrul21 said:
flash tool: Wait until software extraction is complete. stop
Click to expand...
Click to collapse
continues to be invecie 410 of 405

upgrade stopped due to an error

This is not possible. If you flashed D405n bootstack, there is no way LG Flash Tool recognize your phone as D410.
Are you running the LG Flash Tool mod or the official LG Mobile Support Tool? Are you using Download Mode set to Emergency?
On Read Phone Information, you don't need to run it (sometimes it hangs), and click on Clear phone Software update Registry on Select Country % Language Window.
Also check if the KDZ you downloaded is not corrupted. It's a common error the flash tool fail because the kdz is corrupted.

F. Gacrux said:
This is not possible. If you flashed D405n bootstack, there is no way LG Flash Tool recognize your phone as D410.
Are you running the LG Flash Tool mod or the official LG Mobile Support Tool? Are you using Download Mode set to Emergency?
On Read Phone Information, you don't need to run it (sometimes it hangs), and click on Clear phone Software update Registry on Select Country % Language Window.
Also check if the KDZ you downloaded is not corrupted. It's a common error the flash tool fail because the kdz is corrupted.
Click to expand...
Click to collapse
unfortunately so I assure you , I used the flash tool set to emergency and it always fails with the KDZ 405 , invecie loading the KDZ 410 installs easily

sebasrul21 said:
unfortunately so I assure you , I used the flash tool set to emergency and it always fails with the KDZ 405 , invecie loading the KDZ 410 installs easily
Click to expand...
Click to collapse
I followed step by step your guide, a KDZ files are not corrupt , I have tried several of the 405 does not work and no one , instead the KDZ 410 works .
The IMEI is zero

type password to decrypt storage

help
my huawei p9 type password to decrypt storage
after soft reset and restart
on phone >put password>decryption unsuccessful >restart> factory reset >on phone >put password again
sorry for bad english

this pasword is pasword you used to log in in google account in phone!

Arnys said:
this pasword is pasword you used to log in in google account in phone!
Click to expand...
Click to collapse
it not work

soul4454 said:
it not work
Click to expand...
Click to collapse
what is error or message when you enter password ? are there, pasword are incorect, or, pasword was corect but somthing wrong blablabla, what is mesage ?
if you played with nuget and root, you maybe broke your data parttition, thats why need to return to nuget twrp and need to flash properdatafix.zip, after that you need to be able to fix isue!

Arnys said:
what is error or message when you enter password ? are there, pasword are incorect, or, pasword was corect but somthing wrong blablabla, what is mesage ?
if you played with nuget and root, you maybe broke your data parttition, thats why need to return to nuget twrp and need to flash properdatafix.zip, after that you need to be able to fix isue!
Click to expand...
Click to collapse
Decryption unsuccessful
You entered the correct password but the data on your phone is corrupt.
To resume using your phone,you must perform a factory reset.
After the reset ,you can restore any data that was backed up to your google account.

soul4454 said:
Decryption unsuccessful
You entered the correct password but the data on your phone is corrupt.
To resume using your phone,you must perform a factory reset.
After the reset ,you can restore any data that was backed up to your google account.
Click to expand...
Click to collapse
bootloader locked /unlocked ?
reset is done thro twrp or huawei recovery ?

All you need to do is go into your recovery and do a wipe partition and do a factory reset. You will need to reboot your phone a few times before you get back into EMUI.

Huawei P9 Solution
helpful links
http://www.hardreset.info/devices/huawei/huawei-p9/recovery-mode/
Unlock bootloader of your phone
(How to unlock?) http://ministryofsolutions.com/2016/04/official-huawei-bootloader-unlock-tool.html
go to : https://forum.xda-developers.com/p9/how-to/guide-root-huawei-p9-t3367800
1 - DOWNLOAD THIS FILE
Oficial EGTV - http://bit.ly/OficialROOTP9EGTV
-
Mirror - http://bit.ly/Mirror2ROOTp9
2 - Put the phone in fastboot mode
Power off device
Press the volume button down and keep
USB connected to the computer, connect the phone, hold the volume down
3- INSTALL TWRP
Open folder 1
Doble click in windows the .bat file.
repair data and system partitions using twrp
If you just flash the UPDATE.APP then you'll end up with a broken /cust partition with incorrect icons, theming not working, etc.
EMUI recovery will flash UPDATE.APP then flash the dt, then hw updates after.
then FOLDER 3 IS INSTALL RECOVERY STOCK - EVA-L09 MODEL
The solution to unlock your bootloader (using the official method or dc-unlocker), flash TWRP, flash this zip then reflash the dload file.
https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903
Download Marshmallow which matches your new regional files.
download update zip for your model and extract into dload folder on sdcard
Install stock recovery by choosing option 4 in SRK tool
Then copy dload folder from firmware zip file to your sd card
Switch off phone and hold all button, keep holding until update starts

I am having same problems....
type password to decrypt>> password correct but data on phone corrupt must reset phone>>> press factory reset >>> reset successful>>
then warning message 'device failed verification and may not work properly' >>>> goes back to step 1
Any help much appreciated
mr.charlespeter said:
helpful links
http://www.hardreset.info/devices/huawei/huawei-p9/recovery-mode/
Unlock bootloader of your phone
(How to unlock?) http://ministryofsolutions.com/2016/04/official-huawei-bootloader-unlock-tool.html
go to : https://forum.xda-developers.com/p9/how-to/guide-root-huawei-p9-t3367800
1 - DOWNLOAD THIS FILE
Oficial EGTV - http://bit.ly/OficialROOTP9EGTV
-
Mirror - http://bit.ly/Mirror2ROOTp9
2 - Put the phone in fastboot mode
Power off device
Press the volume button down and keep
USB connected to the computer, connect the phone, hold the volume down
3- INSTALL TWRP
Open folder 1
Doble click in windows the .bat file.
repair data and system partitions using twrp
If you just flash the UPDATE.APP then you'll end up with a broken /cust partition with incorrect icons, theming not working, etc.
EMUI recovery will flash UPDATE.APP then flash the dt, then hw updates after.
then FOLDER 3 IS INSTALL RECOVERY STOCK - EVA-L09 MODEL
The solution to unlock your bootloader (using the official method or dc-unlocker), flash TWRP, flash this zip then reflash the dload file.
https://forum.xda-developers.com/p9/development/c432-oeminfo-flash-twrp-t3384903
Download Marshmallow which matches your new regional files.
download update zip for your model and extract into dload folder on sdcard
Install stock recovery by choosing option 4 in SRK tool
Then copy dload folder from firmware zip file to your sd card
Switch off phone and hold all button, keep holding until update starts
Click to expand...
Click to collapse

How to repair soft bricks and bootloops

Im writing this because i have gone through this and realised some things and basics about this phone.As Meticulus has wrote on his page about dumping files,that is the key of getting back to safety.Usually people here get stuck while getting back from Nougat to MM.So most important things to have :
-backup of oem info(i will post link later of flashable zip for l21 model) (or someone else's files but for specified model(l21 can flash someone else's l21 oem info)
link : C4320 DUALSIM OEMINFO https://drive.google.com/file/d/0B3sZyHMlYDO0S1c2Y1lNMlJaVXM/view credits to guy who made this file i have just uploaded it
-dump of system and boot (you can find tutorial on Meticulus page)
-downloaded stock MM ROM and extracted UPDATE.APP
-Revolution nougat recovery
-Meticulus TWRP
So lets say you are in bootloop and there is nothing you can do to get your phone back to life.
*if you are on nougat and dont have recovery:
-turn off the device and insert your sd card to PC/laptop and make folder "dload" on sd.
-extract UPDATE.APP from MM ROM package and move it to dload folder
-download revolution nougat recovery and make a path on desktop for example
-connect your usb cable to pc (not phone)
-now (assuming that your device is off) hold volume down for few seconds and connect to our usb cable and phone will boot to bootloader/rescue mode
-open cmd on pc
-write ~ fastboot flash recovery path/recovery.img (path should be folders where is recovery.img and recovery.img name of img)
-when done,hold power and volume up power and phone will go to recovery
-if you havent done that yet,move dload folder and flashable oem info to sd card
-flash oeminfo and turn off the device
-now hold volume up + volume down + power button to install that update from sd card
phone should boot now
*If you have nougat recovery :
-turn off the device and insert your sd card to PC/laptop and make folder "dload" on sd.
-extract UPDATE.APP from MM ROM package and move it to dload folder
-flash oem info and turn off the device
-now hold volume up + volume down + power button to install that update from sd card
phone should boot now
*Now if the device is still stuck in bootloop and now you dont have recovery:
-download meticulus recovery and extract recovery.img
-move your dump files to sd card (folder name meticulus)
-if your phone is off again hold volume down for few seconds than connect usb cable
-open cmd and type : fastboot flash recovery path/recovery.img (path should be folders where is recovery.img and recovery.img name of img)
-when done hold volume up + power button until phone gets into TWRP
-go to advanced/extras/restore dump and wait while device is restoring your stock system and boot img
after done reboot your device and it should boot without any problem
write down other ways of bootloops so we can fix it together

where is the meticulus page?

diorenzo said:
where is the meticulus page?
Click to expand...
Click to collapse
www.meticulus.co.vu

Bluezzy said:
www.meticulus.co.vu
Click to expand...
Click to collapse
ok and where is the dump?

diorenzo said:
ok and where is the dump?
Click to expand...
Click to collapse
You must dump files manually (Marshmallow) with Meticulus recovery.I said to follow instructions​ on his page not to download

Bluezzy said:
You must dump files manually (Marshmallow) with Meticulus recovery.I said to follow instructions​ on his page not to download
Click to expand...
Click to collapse
lol sorry, btw i have nougat twrp and there isn't dumb in advances so i don't know...
i think the only thing that can saves me is a backup of twrp
cause i can't flash anything from twrp nor from fastboot

diorenzo said:
lol sorry, btw i have nougat twrp and there isn't dumb in advances so i don't know...
i think the only thing that can saves me is a backup of twrp
cause i can't flash anything from twrp nor from fastboot
Click to expand...
Click to collapse
Ohhh then,you should have done that while you was on MM with Meticulus TWRP...

Bluezzy said:
Im writing this because i have gone through this and realised some things and basics about this phone.As Meticulus has wrote on his page about dumping files,that is the key of getting back to safety.Usually people here get stuck while getting back from Nougat to MM.So most important things to have :
-backup of oem info(i will post link later of flashable zip for l21 model) (or someone else's files but for specified model(l21 can flash someone else's l21 oem info)
link : C4320 DUALSIM OEMINFO https://drive.google.com/file/d/0B3sZyHMlYDO0S1c2Y1lNMlJaVXM/view credits to guy who made this file i have just uploaded it
-dump of system and boot (you can find tutorial on Meticulus page)
-downloaded stock MM ROM and extracted UPDATE.APP
-Revolution nougat recovery
-Meticulus TWRP
So lets say you are in bootloop and there is nothing you can do to get your phone back to life.
*if you are on nougat and dont have recovery:
-turn off the device and insert your sd card to PC/laptop and make folder "dload" on sd.
-extract UPDATE.APP from MM ROM package and move it to dload folder
-download revolution nougat recovery and make a path on desktop for example
-connect your usb cable to pc (not phone)
-now (assuming that your device is off) hold volume down for few seconds and connect to our usb cable and phone will boot to bootloader/rescue mode
-open cmd on pc
-write ~ fastboot flash recovery path/recovery.img (path should be folders where is recovery.img and recovery.img name of img)
-when done,hold power and volume up power and phone will go to recovery
-if you havent done that yet,move dload folder and flashable oem info to sd card
-flash oeminfo and turn off the device
-now hold volume up + volume down + power button to install that update from sd card
phone should boot now
*If you have nougat recovery :
-turn off the device and insert your sd card to PC/laptop and make folder "dload" on sd.
-extract UPDATE.APP from MM ROM package and move it to dload folder
-flash oem info and turn off the device
-now hold volume up + volume down + power button to install that update from sd card
phone should boot now
*Now if the device is still stuck in bootloop and now you dont have recovery:
-download meticulus recovery and extract recovery.img
-move your dump files to sd card (folder name meticulus)
-if your phone is off again hold volume down for few seconds than connect usb cable
-open cmd and type : fastboot flash recovery path/recovery.img (path should be folders where is recovery.img and recovery.img name of img)
-when done hold volume up + power button until phone gets into TWRP
-go to advanced/extras/restore dump and wait while device is restoring your stock system and boot img
after done reboot your device and it should boot without any problem
write down other ways of bootloops so we can fix it together
Click to expand...
Click to collapse
The OEMInfo is for C432 VNS-L31 version or L21?

RazOne said:
The OEMInfo is for C432 VNS-L31 version or L21?
Click to expand...
Click to collapse
L21 ,sorry i forgot to write

After I flash the OEMinfo it stays a while at the Huawei Logo then goes in eRecovery

themetester said:
After I flash the OEMinfo it stays a while at the Huawei Logo then goes in eRecovery
Click to expand...
Click to collapse
After flashing oeminfo,did you restore Upadate.app MM eith 3 buttons method??

Bluezzy said:
After flashing oeminfo,did you restore Upadate.app MM eith 3 buttons method??
Click to expand...
Click to collapse
So.. I flash oeminfo , I turn the phone off and I press the 3 buttons. Nothing happens , only after some time it kicks into eRecovery
---------- Post added at 06:53 PM ---------- Previous post was at 06:44 PM ----------
Bluezzy said:
After flashing oeminfo,did you restore Upadate.app MM eith 3 buttons method??
Click to expand...
Click to collapse
I GOT IT TO WORK. I redownloaded the oeminfo.
**EDIT**
And it failed to verify I used 151 trying 130 rn. Mine shipped with the August Security Patch what shall i use?

themetester said:
So.. I flash oeminfo , I turn the phone off and I press the 3 buttons. Nothing happens , only after some time it kicks into eRecovery
---------- Post added at 06:53 PM ---------- Previous post was at 06:44 PM ----------
I GOT IT TO WORK. I redownloaded the oeminfo.
And it failed to verify I used 151 trying 130 rn. Mine shipped with the August Security Patch what shall i use?
Click to expand...
Click to collapse
Uhhh easy.. So you flashed oeminfo and also flashed update?

Bluezzy said:
Uhhh easy.. So you flashed oeminfo and also flashed update?
Click to expand...
Click to collapse
yea and it says at around 50% Failed to check the package content.

Great guide. I succesfully downgraded from B336 to B160 . Thanks!
If you follow the steps .. nothing can go wrong!

RazOne said:
Great guide. I succesfully downgraded from B336 to B160 . Thanks!
If you follow the steps .. nothing can go wrong!
Click to expand...
Click to collapse
On what model?

themetester said:
yea and it says at around 50% Failed to check the package content.
Click to expand...
Click to collapse
Try different version of MM

Bluezzy said:
Try different version of MM
Click to expand...
Click to collapse
I tried 151 and 131 now trying 150 and downloading 130. Do you have a telegram?

themetester said:
I tried 151 and 131 now trying 150 and downloading 130. Do you have a telegram?
Click to expand...
Click to collapse
Man if you have L21 and followed instructions for your problem here,Im sure you wont be stuck like that..Try again only i can tell you is already written in first post

Bluezzy said:
Man if you have L21 and followed instructions for your problem here,Im sure you wont be stuck like that..Try again only i can tell you is already written in first post
Click to expand...
Click to collapse
L21 of course. And yea , thanks.
---------- Post added at 08:08 PM ---------- Previous post was at 07:49 PM ----------
Bluezzy said:
Man if you have L21 and followed instructions for your problem here,Im sure you wont be stuck like that..Try again only i can tell you is already written in first post
Click to expand...
Click to collapse
yea my phone is dead. nothing flashes i tried 151 150 131 130 and now I am trying the first one available.

Bricked p10, need help.

So I have a p10, and decided to see what i could do with it. Having little experience, I managed to get somewhere. Unlocked the bootloader, got twrp, installed it with the command fastboot flash recovery recovery.img and got:
target reported max download size of 471859200 bytes
sending 'recovery' (32034 KB)...
OKAY [ 1.012s]
writing 'recovery'...
OKAY [ 0.200s]
finished. total time: 1.222s
WOOT! Awesome! No problems! Then I issued: fastboot boot recovery.img
And got
downloading 'boot.img'...
OKAY [ 1.020s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 1.030s
WTF?!
So after a bit, I misread and flashed boot.img with: fastboot flash boot boot.img
I guess I flashed the wrong image. I dunno. But now it boots into the screen that tells me "Your device is unlocked and can'r be trusted" tells me its booting, reboots, goes to the same screen again, says its rebooting again, then brings me to Huawei eRecovery. I connect to my wifi network, telling it to download the latest version and recover, and it says "getting package info failed" So I ma stuck with a device that won't boot.
Oh yes, and down volume and power don't bring me to fastboot anymore.
Begging for help here please.

Do the whole rebranding to unbrick, not sure if you flashed wrong image on boot.
Advice: When flashing recovery boot it by powering off and using key combo. Or adb command. Not from fastboot as IMG.

I did a google search on rebranding to unbrick, and found a guide on the 9. So I assume its similar. It first tests me to boot into twrp. I can't. Twrp never got installed. The next step is to get the offical firmware and put it on the SD card. I can't find it. I am in Canada, and can't find any firmware for canada, nevermind anything north american. It is however possible I have found the wrong guide, as I don't really know what I am doing. As a complete noob, links to guides would be nice when possible and available when making recommendations.

The guide is the same for Mate 9/pro and P10/plus
Original: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Explained as easy as posible:
Unlock bootloader (check again that boot loader is unlocked)
Download Update ZIP. I suggest rebrand to VTR-L29 C432 !
A. Get ROM update link through hwmt.ru. Click "filelist.xml". ---> http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=VTR-L29&firmware_page=0
B. Observe "update.zip" size, choose more than 1GB file size FULL OTA . Example VTR-L29C432B164 filelist Link, all three update files and path are in the filelist.xml content.
update.zip: Change URL last "filelist.xml" to "update.zip" download file.
update_data_public.zip: Change URL last "filelist.xml" to "public/update_data_full_public.zip" download file, and rename it to "update_data_public.zip"
update_all_hw.zip: Change URL last "filelist.xml" to "hw/spcseas/update_full_hw_spcseas.zip" download file, and rename it to "update_all_hw.zip" Where spcseas is the model of the file you are downoloading.
Update Package (Download these at original post)
Base: HWOTA_2017050101_Base.zip
OS: Windows -> HWOTA_2017050101_Windows.zip
Model: P10 -> HWOTA_2017050201_VTR.zip [Thanks to @crucky verify]
Put HWOTA on pc desktop and on your external SD card (if you have one, otherwise update process will took a couple of minutes more)
Those 3 downloaded files goes on UPDATE dir, inside HWOTA
Run batch file "update.bat" for same model update or rebrand with/without sdcard.
Select rebrand chose what model is desired (Must be the same as the update package)
Always check the process continues (Sometimes it stucks on twrp or need reconnect to PC)
Once finished Factory default reset will start
Do the process twice! select "Same model update" on the second time.
After update successfully, device might be locked again.

smariob said:
The guide is the same for Mate 9/pro and P10/plus
Original: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Explained as easy as posible:
Unlock bootloader (check again that boot loader is unlocked)
Download Update ZIP. I suggest rebrand to VTR-L29 C432 !
A. Get ROM update link through hwmt.ru. Click "filelist.xml". ---> http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=VTR-L29&firmware_page=0
B. Observe "update.zip" size, choose more than 1GB file size FULL OTA . Example VTR-L29C432B164 filelist Link, all three update files and path are in the filelist.xml content.
update.zip: Change URL last "filelist.xml" to "update.zip" download file.
update_data_public.zip: Change URL last "filelist.xml" to "public/update_data_full_public.zip" download file, and rename it to "update_data_public.zip"
update_all_hw.zip: Change URL last "filelist.xml" to "hw/spcseas/update_full_hw_spcseas.zip" download file, and rename it to "update_all_hw.zip" Where spcseas is the model of the file you are downoloading.
Update Package (Download these at original post)
Base: HWOTA_2017050101_Base.zip
OS: Windows -> HWOTA_2017050101_Windows.zip
Model: P10 -> HWOTA_2017050201_VTR.zip [Thanks to @crucky verify]
Put HWOTA on pc desktop and on your external SD card (if you have one, otherwise update process will took a couple of minutes more)
Those 3 downloaded files goes on UPDATE dir, inside HWOTA
Run batch file "update.bat" for same model update or rebrand with/without sdcard.
Select rebrand chose what model is desired (Must be the same as the update package)
Always check the process continues (Sometimes it stucks on twrp or need reconnect to PC)
Once finished Factory default reset will start
Do the process twice! select "Same model update" on the second time.
After update successfully, device might be locked again.
Click to expand...
Click to collapse
okay, i know you are trying to be helpful, but I just can't follow it...
You said "Download Update ZIP. I suggest rebrand to VTR-L29 C432 !" Which one of them? Is the B just a build number, and I should get the latest? please remember, you are talking to a noob.
You talk about 3 files, update.zip, update_data_public.zip and update_all_hw.zip Do I need them all? If so the last one, where I change filelist.xml to all /cn/update_full_all_cn.zip doesn't work. See the following link http://update.hicloud.com:8180/TDS/.../v92067/f2/full/all/cn/update_full_all_cn.zip
Also, rename the file, "Where spcseas is the model of the file you are downoloading" Huh? I know I have to replace the word spcseas with something, but with that?
Now it says to run update.bat Whats the point? I have not been directed to plug the phone into the computer, and even if I did, the computer won't recognize it because I can't get it into any mode... Where do I put these files? They all go in the same directory? I just can't follow this guide as much as I try..
THERE IS GOOD NEWS HOWEVER!
I have been able to get it into TWRP! This means I can get into fastboot, which means I can re-flash the correct boot.img, IF I can get my hands on it (and assuming that's the actual issue It likely is. It was working until I flashed this other boot.img file.). So if I can get direction on how to get it, I should be okay. Double triple and quadruple bonus points for just providing me a direct link to the boot.img file to use without having to play around trying to follow guides I can't seem to understand.
UPDATE!!
Now although I can get into TWRP, its hit and miss, but I can get there eventually, it will no longer boot into fastboot/recovery. When I click reboot, and choose bootloader in TWRP, it just freezes..
This is getting frustrating. Apparently getting into the bootloader is hit and miss, but i can do it.

Search for Huawei update extractor in order to get BOOT.IMG from update.app (inside update zip) I could upload one myself, but I'm not at home right now.
TWRP doesn't support reboot atm. You must power off completly. To boot to recovery press power on and vol + until huawei logo appears, then relase power. It should boot to recovery TWRP in this case.
For boot bootloader you press vol - when you are connecting usb cable to PC.

smariob said:
The guide is the same for Mate 9/pro and P10/plus
Original: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Explained as easy as posible:
Unlock bootloader (check again that boot loader is unlocked)
Download Update ZIP. I suggest rebrand to VTR-L29 C432 !
A. Get ROM update link through hwmt.ru. Click "filelist.xml". ---> http://hwmt.ru/hwmtsite/firmware-database/?firmware_model=VTR-L29&firmware_page=0
B. Observe "update.zip" size, choose more than 1GB file size FULL OTA . Example VTR-L29C432B164 filelist Link, all three update files and path are in the filelist.xml content.
update.zip: Change URL last "filelist.xml" to "update.zip" download file.
update_data_public.zip: Change URL last "filelist.xml" to "public/update_data_full_public.zip" download file, and rename it to "update_data_public.zip"
update_all_hw.zip: Change URL last "filelist.xml" to "hw/spcseas/update_full_hw_spcseas.zip" download file, and rename it to "update_all_hw.zip" Where spcseas is the model of the file you are downoloading.
Update Package (Download these at original post)
Base: HWOTA_2017050101_Base.zip
OS: Windows -> HWOTA_2017050101_Windows.zip
Model: P10 -> HWOTA_2017050201_VTR.zip [Thanks to @crucky verify]
Put HWOTA on pc desktop and on your external SD card (if you have one, otherwise update process will took a couple of minutes more)
Those 3 downloaded files goes on UPDATE dir, inside HWOTA
Run batch file "update.bat" for same model update or rebrand with/without sdcard.
Select rebrand chose what model is desired (Must be the same as the update package)
Always check the process continues (Sometimes it stucks on twrp or need reconnect to PC)
Once finished Factory default reset will start
Do the process twice! select "Same model update" on the second time.
After update successfully, device might be locked again.
Click to expand...
Click to collapse
smariob said:
Search for Huawei update extractor in order to get BOOT.IMG from update.app (inside update zip) I could upload one myself, but I'm not at home right now.
TWRP doesn't support reboot atm. You must power off completly. To boot to recovery press power on and vol + until huawei logo appears, then relase power. It should boot to recovery TWRP in this case.
For boot bootloader you press vol - when you are connecting usb cable to PC.
Click to expand...
Click to collapse
Thats good to know. I was getting TWRP more often when I did it from off. What was happening was I would holds power and volume up, release power when the logo appeared, and MOST of the time I would boot into TWRP. Sometimes it would just reboot, I would continue to hold up, and it would either reboot, or boot into TWRP. Occasionally I would get the recovery that came with the phone ?!?!
In any event, I managed to get into TWRP, boot into recovery, extract the boot.img, flash it... AND IT WORKED! Phone booted!
So after all this, I backed up EVERYTHING I could using TWRP. The Boot partition, System partition, EVERYTHING! It kept failing on the Data partition, but from my research that wasn't that important anyway. I then installed SuperRoot_noverity_nocrypt.zip, rebooted, installed phh's SuperUser, installed Root Checker, and finally, I have root!!
Thank you so much for the help. About to go "thank clicking" for all the help you provided.

HELP!! (Soft-) bricked my P20Pro CLT-L29

He guys,
as you've read I bricked my phone and I don't know how or where I did the mistake?
Status before brick:
-) FW: EMUI 8.xxx (not exactly sure which one it was)
-) TWRP: 3.2.3.0
-) Rooted
-) BL: unlocked
-) PHONE Unlock
-) FRP Unlock
What I wanted to do:
-) FW Update to: EMUI 9.0 via FirmwareFinder
What I've done:
-) Did a Titanium Backup
-) Installed Firmware Finder
-) Downloaded the Firmware CLT-L29C432E5R1P9B195 (9.0.0.195) (BUT there were ONLY 2 files)
-) 1. file was "update.zip"
-) 2. file was "update_full_CLT-L29_hw_eu.zip"
-) Renamed the files to
-) 1. kept file name "update.zip"
-) 2. file renamed "update_full_CLT-L29_hw_eu.zip" --> update_all_hw.zip
-) Put the 2 files + hurupdater_04.zip + recovery.img (TWRP 3.2.1.0.img) to a folder in Root on my device
-) Reboot to recovery -> TWRP
-) TWRP -> Install -> hurupdater_04.zip
ERRORS:
-) first I saw a message --> "CLT-L09 "Firmware installing --> how can that happened, if I downloaded the CLT-L29 version?
-) Then it aborted the installing process
Current situation:
-) TWRP is installed again --> TWRP 3.2.1.-0 by Pretorian
-) PHONE Unlock
-) FRP Unlock
-) no OS
!! Cannot access my files either via TWRP or Windows explorer --> all files are encrypted and have totally weird names
So please, please help me installing an OS again!
!! And is there a chance to get access to my pictures back???
I appreciate every helpfull advise.
Thanks in advance!!!

He guys,
nobody has an idea to solve/help me with my issues/situation?
I searched the forum and also other forums and pages to find a solution to "my" problem, but without any helpful results.
I am afraid of doing an eRecovery restore because of losing all my data.
I have currently: TWRP installed -> Files/folders with weird names (shown in TWRP & Phone connected to PC "Explorer")
What can I do to save, restore, copy my pictures and files from phone to PC?
Please give me some hints.

This way brought me back
Try downloading the firmware here: FIRMWARE
Then follow these instructions: HEREhttps://forum.xda-developers.com/huawei-p20-pro/development/huawei-p20-pro-charlotte-l29c432b131-8-t3809964
Got me out of a pinch a few times.

Vedrick said:
Try downloading the firmware here: FIRMWARE
Then follow these instructions: HEREhttps://forum.xda-developers.com/huawei-p20-pro/development/huawei-p20-pro-charlotte-l29c432b131-8-t3809964
Got me out of a pinch a few times.
Click to expand...
Click to collapse
Thanks for the help and the links.
BUT before I'll start doing this, there is just one issue left: the encrypted "storage / files" (pics etc.) in TWRP.
BEFORE I want to say, that I've removed all the security barriers like fingerprint, pattern and faceID !!!!
I tried using this https://forum.xda-developers.com/huawei-p20-pro/development/recovery-twrp-3-2-1-0-t3779400
with different kinds of TWRP versions:
TWRP 3.2.1-0.img
twrp_clt_0.1.img frome here
https://forum.xda-developers.com/huawei-p20-pro/development/recovery-twrp-3-2-1-0-t3779400
twrp-3.2.1-0-charlotte-mod.img frome here
https://forum.xda-developers.com/huawei-p20/how-to/how-to-how-to-unbrick-clt-l29c432-t3878714
twrp-3.2.3-4-charlotte.img
But nothing works, my files shown in TWRP -> storage are still encrypted and still shown with weird gibberish names?
Do you know how to solve this, or where I can get the right TWRP version?
I'm totally at the end of ideas and not finding the right way to get access to my pictures and stuff again.

Da_Hausa said:
Thanks for the help and the links.
BUT before I'll start doing this, there is just one issue left: the encrypted "storage / files" (pics etc.) in TWRP.
BEFORE I want to say, that I've removed all the security barriers like fingerprint, pattern and faceID !!!!
I tried using this https://forum.xda-developers.com/huawei-p20-pro/development/recovery-twrp-3-2-1-0-t3779400
with different kinds of TWRP versions:
TWRP 3.2.1-0.img
twrp_clt_0.1.img frome here
https://forum.xda-developers.com/huawei-p20-pro/development/recovery-twrp-3-2-1-0-t3779400
twrp-3.2.1-0-charlotte-mod.img frome here
https://forum.xda-developers.com/huawei-p20/how-to/how-to-how-to-unbrick-clt-l29c432-t3878714
twrp-3.2.3-4-charlotte.img
But nothing works, my files shown in TWRP -> storage are still encrypted and still shown with weird gibberish names?
Do you know how to solve this, or where I can get the right TWRP version?
I'm totally at the end of ideas and not finding the right way to get access to my pictures and stuff again.
Click to expand...
Click to collapse
I honestly don't think any twrp will work, another reason i'll never buy a huawei again. You could try extracting the image files from the update.app that you get from the update.zip file. then manually flash:
You can extract the image files using EMUI Extractor Application.
fastboot flash cust cust.img
fastboot flash system system.img
I believe the pictures are located on the userdata partition. be sure to flash the right android version as it may depend on what framework you have and how far you got when it was updating. You may want to verify the location of those pictures first.

SO I replicated your soft brick, after I backup up my photos. I ccouldn't save them. I'm up and running though. Turns out I had to first manually flash those image files located in update.app. Then I had to do this

Modified\Updated (Bricked device fix)
1) Try downloading the firmware here: FIRMWARE
2) Extract the update.app file from the update.zip, then use EMUI extractor to extract all the image files. You'll then need to manually flash a few of them: (You can move all these images into the main folder of the Reflash tools located in step 3, then run CMD-HERE)
Commands: (Some might error, i forget which but its alright)
fastboot flash cust cust.img
fastboot flash cache cache.img
fastboot flash kernel kernel.img
fastboot flash recovery_ramdisk recovery_ramdis.img (Very Important)
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash vbmeta vbmeta.img
fastboot flash vector vector.img
fastboot flash system system.img
fastboot reboot, unplug the USB-C cable and hold the volume up button. this will put you into recovery mode.
Then you'll need to format data using with the EMUI recovery and if given the option format cache.
Reboot back into bootloader\Download mode.
3) Then follow these instructions: HEREhttps://forum.xda-developers.com/huawei-p20-pro/development/huawei-p20-pro-charlotte-l29c432b131-8-t3809964
Got me out of a pinch a few times.

Unfortunately I seem to have the same issue. I followed @Vedrick's tutorial.
However after fastboot reboot I'm stuck on 'Your device is booting now...'
Any ideas?
I worry that perhaps the 'boot image' on my p20 is messed up. However in the .APP file I can't find the boot image to restore. I do however see 2 SYSTEM images.
nvm! Got it! Had to fastboot erase userdata.