Hello,
I'm from germany and got my tab a few days ago and most is working fine.
The only thing ist the 3G network, I can't get it working, neither in Android(build V1.03_20160307) nor in Windows(Version 1511 Build 10586.104.
In android the tab is asking for the SIM PIN and is displaying the provider info and the signal bars with a small exclamation mark.
In windows 10 he also displays the network provider but network is deactivated
Regards
Oliver
How to detect SIM card!
solution is only one. (no rootting)
1. Install IMEI changer app. and than run.
2. Input IMEI code. and than apply.
3. run windows mode change app.
4. windows os : run android mode changer sw.
5. will be detect SIM card.
but. it is temporary method.
Hi
I have the same issue with the Sim card not recognize on android ' on windows it recognized but i cant use phone on windows side (any way to use phone calls on windows 10 ? how ? ) , i have just internet.
Please hep cause i dont sure i understand al the steps u wrote
can u elaborate abit on every step ?
Thank you
captain choi said:
solution is only one. (no rootting)
1. Install IMEI changer app. and than run.
2. Input IMEI code. and than apply.
3. run windows mode change app.
4. windows os : run android mode changer sw.
5. will be detect SIM card.
but. it is temporary method.
Click to expand...
Click to collapse
hi guys
i've note5 sm-n9200 hong kong default sim work as GSM:SIM1--GSM:SIM2 but if u want use CDMA just u have only SIM1 , Unfortunately NOT ACTIVATED.
so i try to do my best to activate to work but no way just either cdma in sim1 and automatic sim2 locked or let both sim work as GSM...
IF YOU WANT TO ACTIVATE SIM1 as CDMA do the following :
1- download "Shortcut Master.apk"
2- open it and from " MORE or OPTION button " select " Secret Code Explorer "
3- among 202 codes just select " 27663368378 " click it " Launch 0 "
--- now you get " Service Mode "
4- select [5] HW TEST
5- select [1] CDMA TEST
now use Key input of MENU for set 0 after that reboot your mobile and enjoy ony sim1 : cdma and sim2: locked
--to back to the both sim as GSM just :
select [7] NV REBUILD ALL
then reboot and enjoy.
if anybody have a way to let both sim work in same time like SIM1:CDMA , SIM2: GSM then tell us.
no one can reply !!!!!!!!!!!
Try other service menu codes like on Note 4. Did you look at all menu? I don't have Note 5 to look and help. If you send me full service mode menu. I can try to help you.
need help...problem n9200 insirt sim card
I have n9200 ...Plz need help i flashed magsik with twrb then i got bootloop so i flashed device with stock rom from sammobile and problem shown insert sim card to acces internet...plz need help how to fix it plz ???
Hi guys,
This is a simple guide for changing the 4g icons to LTE or the way around
Requirements:
* ADB, you can download it here
* Bootloader: I don' t know if this guide works with bootloader locked, I tried with the unlocked one
Make sure that your device can be recognized by PC
FOR SHOWING LTE INSTEAD OF 4G:
Code:
[CENTER]adb shell
settings put system hw_show_lte "mcccodeofcountry;260"[/CENTER]
FOR SHOWING 4G INSTEAD OF LTE:
Code:
[CENTER]adb shell
settings put system hw_show_lte "260"[/CENTER]
Best Regards !
Works in Android 9 Stock?
Pls give me an example, what i have to put here?
"mcccodeofcountry;260"
DarkJoker360 said:
Hi guys,
This is a simple guide for changing the 4g icons to LTE or the way around
Requirements:
* ADB, you can download it here
* Bootloader: I don' t know if this guide works with bootloader locked, I tried with the unlocked one
Make sure that your device can be recognized by PC
FOR SHOWING LTE INSTEAD OF 4G:
Code:
[CENTER]adb shell
settings put system hw_show_lte "mcccodeofcountry;260"[/CENTER]
FOR SHOWING 4G INSTEAD OF LTE:
Code:
[CENTER]adb shell
settings put system hw_show_lte "260"[/CENTER]
Best Regards !
Click to expand...
Click to collapse
You can edit hw_default.xml on cust for that, you can show 4.5G if you want it to.
But doesn't means that is true.
You can e in 4G zone but no LTE.
Example my icon shows 4Glte because is on 4G network with LTE.
Huawe have a prop written wrong, i fixed and stars to show like this.
I can't remember for sure but i think is this
persist.volte_enabled_by_hw=1
.
BBJFdez said:
Pls give me an example, what i have to put here?
"mcccodeofcountry;260"
Click to expand...
Click to collapse
Hi, I don't know if this information is still useful for you.
I have a P20 pro running on EMUI 8.1 and the device no longer displays "LTE+" anymore after I changed my device model from L04(Canada) to L09(Europe).
This method works for me.
For the Mobile Country Code(MCC) you can find it in this link. Open the link then try to find your country.
en.wikipedia.org/wiki/Mobile_country_code
For example, I'm in Canada and my Mobile Country Code(MCC) is 302.
So, I will input something like this in my terminal
settings put system hw_show_lte "302;260"
then reboot the device.
Some findings:
1. After I changed MCC to 302, the device doesn't display "LTE+" anymore.
2. I tried 310(US) and my device displays "4G+" icon, not “LTE” or "LTE+"(Maybe every country is different).
Laoguang said:
Hi, I don't know if this information is still useful for you.
I have a P20 pro running on EMUI 8.1 and the device no longer displays "LTE+" anymore after I changed my device model from L04(Canada) to L09(Europe).
This method works for me.
For the Mobile Country Code(MCC) you can find it in this link. Open the link then try to find your country.
en.wikipedia.org/wiki/Mobile_country_code
For example, I'm in Canada and my Mobile Country Code(MCC) is 302.
So, I will input something like this in my terminal
settings put system hw_show_lte "302;260"
then reboot the device.
Some findings:
1. After I changed MCC to 302, the device doesn't display "LTE+" anymore.
2. I tried 310(US) and my device displays "4G+" icon, not “LTE” or "LTE+"(Maybe every country is different).
Click to expand...
Click to collapse
I have to put the quotes? You have put a number after your MCC, what is it?
BBJFdez said:
I have to put the quotes? You have put a number after your MCC, what is it?
Click to expand...
Click to collapse
Yes, you have to put the quotes. I don't know what 260 means. I just follow the instruction form DarkJoker360.
settings put system hw_show_lte "mcccodeofcountry;260" This is the DarkJoker360's original command.
settings put system hw_show_lte "302;260" Then I changed mcccodeofcountry to the actual number
Helllo everybody, I´ve just bootloader ulonck my Huawei Mate 20 lite and i want to convert it from single sim to dual sim but i don´t find a oeminfo for a dual SIM Mate 20 lite. Can you help me? Thanks!
sne-lx1
ye
what you need?
soundi1337 said:
ye
what you need?
Click to expand...
Click to collapse
I need the oeminfo of a dual sim huawei mate 20 lite to convert mine to it. Do you have it?
Thanks.
rareba121 said:
I need the oeminfo of a dual sim huawei mate 20 lite to convert mine to it. Do you have it?
Thanks.
Click to expand...
Click to collapse
How did you unlock it
nice question
Barebonet said:
How did you unlock it
Click to expand...
Click to collapse
svejia said:
nice question
Click to expand...
Click to collapse
He did it, check here how:
https://forum.xda-developers.com/showpost.php?p=77898855&postcount=10
@rareba121
1. You should correct in the thread the device name, is SEN and should be SNE
2. Give more details about the location, is oeminfo for europe C432 or for other location?
kilroystyx said:
He did it, check here how:
https://forum.xda-developers.com/showpost.php?p=77898855&postcount=10
@rareba121
1. You should correct in the thread the device name, is SEN and should be SNE
2. Give more details about the location, is oeminfo for europe C432 or for other location?
Click to expand...
Click to collapse
Thank you @kilroystyx, I´ve just edit the thread.
The location is oeminfo for europe, now i have C109 and i don´t know what oeminfo i need to convert my device in to dual sim.
Thanks in advance.
rareba121 said:
Thank you @kilroystyx, I´ve just edit the thread.
The location is oeminfo for europe, now i have C109 and i don´t know what oeminfo i need to convert my device in to dual sim.
Thanks in advance.
Click to expand...
Click to collapse
Your device is a Single SIM and locked to Orange provider and you want unlock it from provider and enable the dual SIM, am I correct?
If yes, oeminfo dual SIM from C432 is the right one for your case (SNE-LX1C432).
When someone share the oeminfo I'll guide you.
Please note that after rebrand the IMEI from second SIM will be null (000000000000000)
You should check first if this will be an issue for you?
kilroystyx said:
Your device is a Single SIM and locked to Orange provider and you want unlock it from provider and enable the dual SIM, am I correct?
If yes, oeminfo dual SIM from C432 is the right one for your case (SNE-LX1C432).
When someone share the oeminfo I'll guide you.
Please note that after rebrand the IMEI from second SIM will be null (000000000000000)
You should check first if this will be an issue for you?
Click to expand...
Click to collapse
Thanks for your answer, I hope someone share it as soon as possible!
kilroystyx said:
Your device is a Single SIM and locked to Orange provider and you want unlock it from provider and enable the dual SIM, am I correct?
If yes, oeminfo dual SIM from C432 is the right one for your case (SNE-LX1C432).
When someone share the oeminfo I'll guide you.
Please note that after rebrand the IMEI from second SIM will be null (000000000000000)
You should check first if this will be an issue for you?
Click to expand...
Click to collapse
@kilroystyx if i find someone that has a mate 20 lite dual sim, can i backup the oeminfo?do you know how can i do it?
Thanks.
rareba121 said:
@kilroystyx if i find someone that has a mate 20 lite dual sim, can i backup the oeminfo?do you know how can i do it?
Thanks.
Click to expand...
Click to collapse
First you have to check and post here your partition layout.
Connect your device to PC
In the terminal run this command to check the communication => adb devices
You should see something like this:
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>[B]adb devices[/B]
List of devices attached
9WVXXXXXXXXXXXX device
Then adb shell
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>[B]adb shell[/B]
HWANE:/ $
And finally to get layout partition run this command => ls -l /dev/block/platform/hi_mci.0/by-name/
Code:
HWANE:/ $ [B]ls -l /dev/block/platform/hi_mci.0/by-name/[/B]
Please post here the result.
kilroystyx said:
First you have to check and post here your partition layout.
Connect your device to PC
In the terminal run this command to check the communication => adb devices
You should see something like this:
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>[B]adb devices[/B]
List of devices attached
9WVXXXXXXXXXXXX device
Then adb shell
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>[B]adb shell[/B]
HWANE:/ $
And finally to get layout partition run this command => ls -l /dev/block/platform/hi_mci.0/by-name/
Code:
HWANE:/ $ [B]ls -l /dev/block/platform/hi_mci.0/by-name/[/B]
Please post here the result.
Click to expand...
Click to collapse
Hi @kilroystyx, here i post the result of what you tell me:
C:\Program Files (x86)\Minimal ADB and Fastboot>adb shell
HWSNE:/ $ ls -1 /dev/block/platform/hi_mci.0/by-name/
bootfail_info
cache
certification
cust_a
ddr_para
dfx
dto_a
dts_a
erecovery_kernel_a
erecovery_ramdisk_a
erecovery_vbmeta_a
erecovery_vendor_a
fastboot_a
frp
fw_hifi_a
fw_lpm3_a
hdcp_a
hhee_a
hisee_encos
hisee_fs_a
hisee_img_a
isp_boot_a
isp_firmware_a
kernel_a
misc
modem_fw_a
modem_om
modem_secure
modemnvm_backup
modemnvm_cust_a
modemnvm_factory
modemnvm_img
modemnvm_update_a
nvme
odm_a
oeminfo
patch_a
persist
product_a
ramdisk_a
recovery_ramdisk_a
recovery_vbmeta_a
recovery_vendor_a
reserved1
reserved2
reserved3_a
reserved4_a
reserved6
reserved7
rrecord
secure_storage
sensorhub_a
splash2
system_a
teeos_a
trustfirmware_a
userdata
vbmeta_a
vector_a
vendor_a
veritykey
version_a
vrl
vrl_backup
Thank you!
At this point you need root.
Backup your oeminfo, identify as Single SIM and then save in PC
In the terminal use these commands:
adb shell
su (You have to grant su permissions on the device)
dd if=/dev/block/platform/hi_mci.0/by-name/oeminfo of=/sdcard/oeminfo.img
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>adb shell
HWANE:/ $ su
HWANE:/ # dd if=/dev/block/platform/hi_mci.0/by-name/oeminfo of=/sdcard/oeminfo.img
131072+0 records in
131072+0 records out
67108864 bytes transferred in 0.913 secs (73503684 bytes/sec)
HWANE:/ #
Flash a new oeminfo placed in internal storage with name "oeminfo.img"
adb shell
su
dd if=/sdcard/oeminfo.img of=/dev/block/platform/hi_mci.0/by-name/oeminfo
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>adb shell
HWANE:/ $ su
HWANE:/ # dd if=/sdcard/oeminfo.img of=/dev/block/platform/hi_mci.0/by-name/oeminfo
131072+0 records in
131072+0 records out
67108864 bytes transferred in 4.597 secs (14598404 bytes/sec)
HWANE:/ #
After oeminfo you have to flash a full firmware, dload package should be the best choice.
Search on this site https://androidhost.ru/search.html
Use this for searching MATE 20 LITE SNE-LX1 SNE-L21 and download the latest firmware for Europe C432
Note, be careful with dd command...
Before flash new oeminfo, place on the external SDCard the dload folder with full firmware, and you are ready to proceed with SW upgrade.
I did it all this steps on my device, your device is different, so do it at your own risk.
In the previous post you used a wrong command, you used "-1" instead of "-l"
To avoid mistakes use copy/past instead of.
So repeat again:
Code:
HWANE:/ $[B] ls -l /dev/block/platform/hi_mci.0/by-name[/B]/
kilroystyx said:
Your device is a Single SIM and locked to Orange provider and you want unlock it from provider and enable the dual SIM, am I correct?
If yes, oeminfo dual SIM from C432 is the right one for your case (SNE-LX1C432).
Click to expand...
Click to collapse
I have the SNE-LX1
CUSTC432D1
How do I get oeminfo to him?
Never done that before :-/
JonasStomp said:
I have the SNE-LX1
CUSTC432D1
How do I get oeminfo to him?
Never done that before :-/
Click to expand...
Click to collapse
Your device is dual SIM?
You need root to get oeminfo from him, or a TWRP installed.
Root should be easier with Magisk help.
But the show begins after you unlook bootloader.
What is your status right now?
kilroystyx said:
Your device is dual SIM?
You need root to get oeminfo from him, or a TWRP installed.
Root should be easier with Magisk help.
But the show begins after you unlook bootloader.
What is your status right now?
Click to expand...
Click to collapse
Yup. Rocking a Dual sim version.
It Is the only Mate 20 Lite version In Denmark :-/
Haven't unlocked the bootloader, due to Huawei removing the request page.
I am thinking about rooting, but I don't really know the benefits of it :-/
JonasStomp said:
Yup. Rocking a Dual sim version.
It Is the only Mate 20 Lite version In Denmark :-/
Haven't unlocked the bootloader, due to Huawei removing the request page.
I am thinking about rooting, but I don't really know the benefits of it :-/
Click to expand...
Click to collapse
To have the bootloader unlocked you have to payed, unfortunately is around 30 eur.
"Unlock bootloader" to install custom ROM is the most important benefit that I can remember, so far I see none, with Huawei politic to stopped provide codes , what I see is developers moving to another brands.
kilroystyx said:
To have the bootloader unlocked you have to payed, unfortunately is around 30 eur.
Install custom ROM is the most important benefit that I can remember, so far I see none, with Huawei politic to stopped provide codes , what I see is developers moving to another brands.
Click to expand...
Click to collapse
Yeah. I see that almost all Custom Rom devs. Is moving away from HUAWEI due to this new stupid policy.
Right after I bought my phone, I found out about this....
Also heard some rumors, that the newest updates, Is trying to make modded phones unbootable from a John Wu tweet.
JonasStomp said:
Yeah. I see that almost all Custom Rom devs. Is moving away from HUAWEI due to this new stupid policy.
Right after I bought my phone, I found out about this....
Also heard some rumors, that the newest updates, Is trying to make modded phones unbootable from a John Wu tweet.
Click to expand...
Click to collapse
Yes, so far is rumor because nothing happened in the latest updates.
If it comes true I'll move to another brand too.
kilroystyx said:
Yes, so far is rumor because nothing happened in the latest updates.
If it comes true I'll move to another brand too.
Click to expand...
Click to collapse
I guess I should think about using my 14 days full refund thing on my phone :-/
It Is really stupid of them to just make a real sharp U turn, and stop supporting the Community
I recently found a way to fix missing imei, sim card related issues.
My problem was the dual sim. I'd insert a sim in sim 1 and sim 2, sim 2 would have no service.
I don't know if this works in other MI variants, it worked on my 2014812.RequirementsQFIL tool flash tool
Qualcomm Drivers
A brain
I will not be held sh!t if your device gets bricked.STEPSPut your phone in diag mode. Turn on usb debugging in developer options in custom roms, power off the phone, press and hold vol up and plug in your usb cable.
MIUI ROM users, dial *#*#717717#*#* or*#*#13491#*#*. if they don't work then search online
Open QFIL, make sure build type on META BUILD. Plug in your phone while in diag mode and click select port, it will show up.
Click tools and click QCN backup and restore.
Click on browse, find the file wherever you saved it, click on Restore QCN and let itflash.
Reboot device and everything will be fixed.
i will attach the file i used for the baseband.
And i've attached the link i used to download.LINKS
File QCN Xiaomi Hasil Backup UFI Box
Download,BI Only,Firmware SP Flashtool,firmware Android,Samsung,Xperia,Blackberry,Rapido,Crack,Tool Flasher,Cara,Trik Jumper,Matot,Tutorial,Deadboot
bocah-ajar.blogspot.com
ADDITIONAL INFORMATIONMy baseband version: MPSS.DPM.1 ... ANUZM-1.33887.1.41528.1
Cross check your Ram, Storage and baseband version to avoid hard brick.
Works on Windows 8/10/11.