Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
My first Rom built for the Huawei Y6.
Resurrection Remix is the ROM that has been based on CM,Slim,Omni and original Remix ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device.
Devices Confirmed working:
SCL-L01
[All all of the Huawei Y6 2015 models should work fine]
Dowload link: https://mega.nz/#!7coTgT4I!YhbJcWLXfoGy-2r9-UrxhcTiYCH6_1UArxv6A5YR6lc
Features: Based on LineageOS 14.1 - Android 7.1.2 Nougat
Installation:
Wipe Data, Cache, Dalvik and System.
After that flash from Twrp 3.x
Known issues:
None.
If i helped press the thanks button. Also thanks Runner85sx for making this possible.
XDA:DevDB Information
Unofficial Resurrection Remix 5.8.5 , ROM for the Huawei Y6
Contributors
Thespartann, Runner85sx
Source Code: https://github.com/Runner85sx?tab=repositories
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Twrp 3.x
Based On: Lineage
Version Information
Status: Testing
Created 2018-06-01
Last Updated 2018-06-01
Hello,
is this Rom working with SCL-L21? I'm using RR 5.8.5 from Carlos. Sometimes it lags because of not enough free memory. Is this Rom better than the other version?
mime77 said:
Hello,
is this Rom working with SCL-L21? I'm using RR 5.8.5 from Carlos. Sometimes it lags because of not enough free memory. Is this Rom better than the other version?
Click to expand...
Click to collapse
Hi. Yes this work should work perfectly with SCL-L21
And yes, this ROMs works better, well I think its still eating most of the RAM. Well you may use Lineage or Slim for this to be fixed.
I didn't experience any lags until now because of the low RAM.
I will see if I may fix the RAM being eated by the OS.
Press the thanks button if I helped
I have tested the Rom 2 Days. It uses not so much RAM like the other RR version. Unfortunaly the battery usage is too high, even in flight mode.
mime77 said:
I have tested the Rom 2 Days. It uses not so much RAM like the other RR version. Unfortunaly the battery usage is too high, even in flight mode.
Click to expand...
Click to collapse
Well go with Lineage/Slim7/XenonHD then.
I know they don't have a lot of customizations, but they work well.
I am testing now LOS 14.1. If you make a new build, i can test it.
Works on SCL-L21. No bugs found yet.
Can i install it on lyf wind 7
my phone has the exact same specs as this phone has. so can i install this rom on my phone lyf wind 7.
Hi, flashing error on Y6 2017 MYA-L11 (HWMYA-L6737), how could I change the updater script in order to make it work?
Related
CyanogenMod 13 is a free, community built distribution of Android 6.0 (Marshmallow) which greatly extends the capabilities of your phone, tablet or PMP.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
These are CM13 builds for the Huawei P9 Lite. It may cause all the things in the disclaimer to happen, or steal your girlfriend while you are busy flashing ROMs.
GPL:
Meticulus said:
Source trees are up
kernel: https://github.com/Meticulus/android_kernel_huawei_hi6250
device: https://github.com/Meticulus/android_device_huawei_hi6250
vendor: https://github.com/Meticulus/android_vendor_huawei_hi6250
For you builders out there. there is a patch.sh file which must be run from the patches dir before building.
Also there are a few projects out side of CM that I build into my ROMs:
https://github.com/omnirom/android_packages_apps_PerformanceControl/tree/android-4.4
https://github.com/Meticulus/android_packages_apps_CodinalteParts.
Click to expand...
Click to collapse
Warning: Currently, this ROM is in BETA.
Notice: These are not "official" CyanogenMod builds.
PLEASE STAY INFORMED!
No one likes to repeat themselves over and over again.
Latest Development Activity: here
Development Blog: here
I am not your personal tech support/customer service!
Don't post in here just to get me to notice or help you!
If all you do is complain then I never help you. That's my choice.
If you are helpful and contribute to development by testing or helping out others, I am more likely to help you.
If I tell you to take your conversation out of this thread, it's because you are OFF TOPIC. So don't respond, just continue somewhere else!
If you try to tell me what to do or how I should be, then I HATE YOU! I can't help it. I HATE THAT!
If you don't read what I write then when you don't understand I laugh at you!
Download | Changelog | Install Instructions: meticulus.co.vu
Gapps [arm64 | 6.0 | you choose]: here
XDA:DevDB Information
CyanogenMod 13, ROM for the Huawei P9 Lite
Contributors
Meticulus, dady000, surdu_petru, The Marionette, XePeleato
Source Code: https://github.com/Meticulus
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Bootloader Unlocked / TWRP
Based On: CyanogenMod
Version Information
Status: Beta
Created 2016-09-20
Last Updated 2016-12-20
Working / Not working
Working
It boots
RIL (dual sim not tested)
LCD Display
Touch screen
Audio
Wifi
Bluetooth: File Transfers
Accelerometer sensor
Proximity sensor
Luminosity sensor
Magnetic Sensor
Deep Sleep
Wifi Hotspot
USB Tethering
Bluetooth Tethering
External SD Card: for "Portable storage" use
External SD Card: "Internal storage" use
Battery Usage Stats
GPS
Cameras
NFC
Not working
FM Radio
Emulated? Gyroscope sensor
Emulated? Air pressure sensor
Minor issues
Thank you @Meticulus that you have made this possible.
Now I 'm really very curious how this evolved .
AWESOME, eagerly following this thread.
Sent from my GEM-703L using XDA-Developers mobile app
Is there a basic working not working list as I haven't even rooted this phone yet.
Sent from my HUAWEI VNS-L31 using Tapatalk
Well,nothing works except for boot.
I don't suggest anyone who isn't experienced to try to flash it,it is a pain to come back to stock after you do everything to flash CM(not emotionally hard but literally hard).
that was fast...
Good! thanks for work on it!
Wow, good job !
That was fast
And the alpha build had a lift off! Way to go
THANK YOU VERY MUCH! Can't wait for it!!!
Does it have TWRP built in?
So can I flash it and then just restore my current setup? Or will I have to reinstall TWRP?
Schlengge said:
Does it have TWRP built in?
So can I flash it and then just restore my current setup? Or will I have to reinstall TWRP?
Click to expand...
Click to collapse
TWRP isn't included,and you will have a bad time trying to restore stock after doing all the things for CM.
Trust me,the build isn't anything special for now(only boots, the UI is glitchy(since we have to skip the Huawei hwcomposer like any other Hauwei phone on CM),the nav bar buttons are a bit too big and the phone won't wake up once it goes to sleep). That's all,to be honest.
The Marionette said:
TWRP isn't included,and you will have a bad time trying to restore stock after doing all the things for CM.
Trust me,the build isn't anything special for now(only boots, the UI is glitchy(since we have to skip the Huawei hwcomposer like any other Hauwei phone on CM),the nav bar buttons are a bit too big and the phone won't wake up once it goes to sleep). That's all,to be honest.
Click to expand...
Click to collapse
Ah okay thats what I expected.
No problem though. A booting ROM this fast is more than I imagined. Cool to see a build already
Meticulus said:
CyanogenMod 13 is a free, community built distribution of Android 6.0 (Marshmallow) which greatly extends the capabilities of your phone, tablet or PMP.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
These are CM13 builds for the Huawei P9 Lite. It may cause all the things in the disclaimer to happen, or steal your girlfriend while you are busy flashing ROMs.
GPL:
Code:
https://github.com/Meticulus
Warning: Currently, this ROM is EXTREMELY ALPHA.
Download meticulus.co.vu
Gapps: here
XDA:DevDB Information
CyanogenMod 13, ROM for the Huawei P9 Lite
Contributors
Meticulus
Source Code: http://github.com/Meticulus
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Bootloader Unlocked / TWRP
Based On: CyanogenMod
Version Information
Status: Testing
Created 2016-09-20
Last Updated 2016-09-20
Click to expand...
Click to collapse
Lol that was fast af... Just wondering, how much would it take to get to a semi-stable rom? Thanks for working on this device! Cheers
Acoca said:
Lol that was fast af... Just wondering, how much would it take to get to a semi-stable rom? Thanks for working on this device! Cheers
Click to expand...
Click to collapse
That depends. Huawei pretty much,politely put,urinated over the dev community by making heavy changes to Android and then refusing to give all the info to devs,making CM/AOSP impossible or extremely hard to port.
It is really hard to speculate,we have no idea what Huawei messed up on the software level. I mean,we do,but I am sure even more unpleasant surprises are on the way.
Either way great work just to get as far as a booting build. Lucky as this phone has zero dev appeal really.
Sent from my HUAWEI VNS-L31 using Tapatalk
Acoca said:
Lol that was fast af... Just wondering, how much would it take to get to a semi-stable rom? Thanks for working on this device! Cheers
Click to expand...
Click to collapse
Please do not quote the OP.
Source trees are up
kernel: https://github.com/Meticulus/android_kernel_huawei_hi6250
device: https://github.com/Meticulus/android_device_huawei_hi6250
vendor: https://github.com/Meticulus/android_vendor_huawei_hi6250
For you builders out there. there is a patch.sh file which must be run from the patches dir before building.
Also there are a few projects out side of CM that I build into my ROMs:
https://github.com/omnirom/android_packages_apps_PerformanceControl/tree/android-4.4
https://github.com/Meticulus/android_packages_apps_CodinalteParts
EDIT: I think I will have the hwcomposer fixed soon...
Omg, when this actually is gonna work We can't thank the developer enough...
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices But i have tested so no chance, dead SD cards is not my fault,
* thermonuclear war, or you getting fired. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hello guys, recently I developed my first ROM for Nexus 4 (mako), and wanted to share, it is the first of many that can come, and I first chose to develop a Cyanogenmod 13 (6.0.1), because in my opinion it is Atally the most stable, I hope you like, any bug, please let me know, grateful.
Changelog:
Code:
1. Init
Download ROM (1.0) Stable
GAPPS
CUSTOM RECOVERY (CWM)
XDA:DevDB Information
Cyanogenmod 13 for Nexus 4 (MAKO), ROM for the Google Nexus 4
Contributors
BadGuy
Source Code: https://github.com/BadGuy552/
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Custom Recovery
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-12-22
Created 2016-12-23
Last Updated 2016-12-23
Reserved
BadGuy said:
Based On: CyanogenMod
Click to expand...
Click to collapse
Well well!
Developers are racing on the N, and here suddenly appears MM.
Please write more, except that it is based on CM.
ROM is much smaller than cm-13.0-20160820-SNAPSHOT-ZNH5YAO0J5-mako.zip, so presumably something is not.
ze7zez said:
Well well!
Developers are racing on the N, and here suddenly appears MM.
Please write more, except that it is based on CM.
ROM is much smaller than cm-13.0-20160820-SNAPSHOT-ZNH5YAO0J5-mako.zip, so presumably something is not.
Click to expand...
Click to collapse
But it is based on CM, I also noticed that it got smaller, but so far the rom did not show bugs, and since it is my first build for Nexus 4, I decided to test it first with the CM-13.0, but soon I'm going Start trying a Nougat.
Hey ,
Welcome to the goodness of Oreo. This topic will be dedicated to our bring up of Oreo for Moto G 2015
Disclamier:
* Include <std_disclaimer.h>
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
We have Gapps here.
http://opengapps.org
***USE Gapps of your choosing, we prefer Open Gapps***
- Please Do Not Mirror our files without talking to us. We can do that ourselves should we desire to. -
What's working?
Camera ( USE footej to record videos)
RIL
WiFi
Storage
4G
What's not working?
VoLTE
Downloads:
Download [osprey]
Credits:
Xenon HD
AOSP
Open Gapps
LineageOS
TheMuppets
XDA:DevDB Information
[ROM][8.0.0]Xenon HD [OSPREY] [UNOFFICIAL], ROM for the Moto G 2015
Contributors
althafvly, Alberto97, ishubhamsingh, pavanjadhaw Firelord
Source Code: https://github.com/LineageOS/android_device_motorola_osprey
ROM OS Version: 8.x Oreo
Based On: Lineage
Version Information
Status: Beta
Created 2017-11-09
Last Updated 2017-11-09
Reserved
8-11-2017
-initial release
althafvly said:
8-11-2017
-initial release
Click to expand...
Click to collapse
Great..
After over 24 hours of running, rom is smooth and clean. Few forse close on a couple of settings, such as..... before I discovered battery charging light is off by default, I searched for it, and got a forse close.
You're on fire man. Great. Thanks
I clean flashed this rom and got error7 ,can someone help me try this out . I tried flashing with gapps nano and su .
stonny20 said:
I clean flashed this rom and got error7 ,can someone help me try this out . I tried flashing with gapps nano and su .
Click to expand...
Click to collapse
Have you updated to latest squid2 TWRP ?
If not then you can get it here https://forum.xda-developers.com/devdb/project/?id=11051#downloads
rahul9999 said:
Have you updated to latest squid2 TWRP ?
If not then you can get it here https://forum.xda-developers.com/devdb/project/?id=11051#downloads
Click to expand...
Click to collapse
Thanks for the help. Nice ROM build
stonny20 said:
Thanks for the help. Nice ROM build
Click to expand...
Click to collapse
It's the best Oreo rom.
Wifi no works :'(
Hunimix said:
Wifi no works :'(
Click to expand...
Click to collapse
Working here.
melp57 said:
Working here.
Click to expand...
Click to collapse
My bad, works very good
everything smooth and stable....but there are some issues in mobile network reception especially 4G...and battery backup is on the lower side compared to LOS 15 latest build by alberto
Hunimix said:
My bad, works very good
Click to expand...
Click to collapse
Glad to hear!
Note:
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Thanks to @Displax
Thanks to Google & Xiaomi Team providing this Rom for Beta Tester
Guys Before flashing rom Think twice if you want to come back to Andriod 7.1, you need to flash Fastboot method or Mi flash tool this will wipe you data(Internal Storage)
Instructions:
Backup Your All Data & System
Download the Zip
Extract the zip
Paste the extracted folder TWRP/BACKUPS/df0bdeb70404/[UNOFFICIAL] AOSP OREO - tissot
Reboot to recovery
Wipe Data , System , Caches , Davlik Caches
Restore [UNOFFICIAL] AOSP OREO - tissot
Enjoy the rom
Bugs are there because its beta rom - Whatsapp and telegram sucks - use telegram plus
Download Link
[url]https://www.androidfilehost.com/?fid=817906626617952463[/URL]
XDAevDB Information
[ROM][8.0.0][UNOFFICIAL] AOSP OREO - tissot, ROM for the Xiaomi Mi A1
Contributors
@ramesh1686
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Version Information
Status: Testing
Created 2017-12-14
Last Updated 2017-12-14
Bangggg!
Holy moly..tats great man :good:
Is it same as the official beta build?
So this is a working dump of the beta?
Is everything working in this rom?
Very good work .... Awesome
Great.
is it working?
jazzthe#1 said:
Is it same as the official beta build?
Click to expand...
Click to collapse
yes
ihormaniuk said:
is it working?
Click to expand...
Click to collapse
Yes
What about stability so far? Great work man. Thanks
Finalyy its there!
Thanks a ton!
Is every bug fixed in this ??
What version of TWRP should we use ?
Thnks for your work brother ...
What are the bugs in initial beta ?
great !
great work man :good:
thanks a lot !
Deleted
Is it really a custom rom or just twrp backup file of official beta?
Apoorv AR said:
Is it really a custom rom or just twrp backup file of official beta?
Click to expand...
Click to collapse
TWRP backup of official beta
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my preview build version of LineageOS 18.1 for our Samsung Galaxy Note 10.1 devices.
At first I want to thank @forkbomb444, @rINanDO, @ChronoMonochrome for all your work which helped me a lot to bring this up.
This is a early BETA build, so don't install it if you want a completley stable rom and don't report my already listet bugs!
I'm working nearly every day on our N80xx devices, because LOS18 runs much smoother than LOS17.1, I will continue here.
When you have BitGapps installed, you have to reflash them after every update!
Here you can see how far everything is working for now.
Spoiler: Whats working
N8000, N8010, N8013, N8020:
Boot
Audio
Bluetooth
Graphics
Cameras
Sensors
Wifi
GPS
USB
Video playback (HW/SW)
Tethering via USB, WIFI and Bluetooth
consumerir transmitter
Stylus with gestures and hovering icon
sec keyboard dock
RIL on N8000 (mobile connection)
much more...
Spoiler: Whats not working
Screen Cast, Chromecast did work, Samsung TV not
Main camera sometimes can't take a picture (reopen app or lower resolution)
Random reboots
N8020: RIL works 90%
Screen lightning bug, nearly eliminated
SD-Card can't be formatted as internal storage, this will cause a bootloop
Spoiler: Links
TWRP
N8000 / N8005 Rom
N8010 / N8013 Rom
N8020 Rom
Magisk zip file
Spoiler: Changelog
22.12.2020
23.12.2020
24.12.2020
11.01.2021
14.01.2021
11.03.2021
28.04.2021
29.04.2021
30.04.2021
01.07.2021
06.07.2021
15.07.2021
24.07.2021
18.08.2021
19.08.2021
23.09.2021
29.09.2021
07.10.2021
08.10.2021
26.10.2021
05.11.2021
08.11.2021
03.12.2021
14.12.2021
06.01.2022
07.01.2022
25.02.2022
15.04.2022
Spoiler: How to improve GPS
You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /system/etc/gps.conf.
Or you try GPS Server Optimizer app for a faster 3D fix.
For both methods you need root rights.
If you are going to use Gapps,
here you can download them:
Open Gapps
For the others, you can use microG in future.
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Wanna improve your sound configs?
Now you can use my app to access all boeffla sound configurations.
Exynos4 Kernel Manager - Apps on Google Play
This app provides Boeffla sound control and other kernel + charging tweaks
play.google.com
Spoiler: How to install it?
Instructions
XDA:DevDB Information
[ROM][11.x][N8000/N801x/N8020][BETA] LineageOS 18.1, ROM for the Samsung Galaxy Note 10.1
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 11.x R
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.4.0
Based On: LineageOS
Selinux: permissive, this only makes sense as soon the ROM is stable.
Version Information
Status: Beta
Created 2020-12-21
Last Updated 2022-04-15
Wow. Thanks for this. I will test it out later but in the meantime, I don't see any Gapps for Lineage 18.1/Android 11 that is for ARM (only ARM64)...
xtoad said:
Wow. Thanks for this. I will test it out later but in the meantime, I don't see any Gapps for Lineage 18.1/Android 11 that is for ARM (only ARM64)...
Click to expand...
Click to collapse
OpenGApps - Browse /arm/test at SourceForge.net
OpenGApps daily releases
sourceforge.net
Wow, really? Thanks a lot!
Debvgger said:
Wow, really? Thanks a lot!
Click to expand...
Click to collapse
I will upload a new update today with better stability.
Update 22.12.2020:
Some Bugfixes, but still not stable.
Good Morning!
Are we going to have a rom for the N8000?
Alexfs said:
Good Morning!
Are we going to have a rom for the N8000?
Click to expand...
Click to collapse
Yes, I'm already having a version, but I'm still struggling with ril.
It crashes every 5 seconds, as soon as I have resolved this issue,
I will upload it.
I have been unable to get through setup without reboots or boot loops. (I had also the same problem with the last few Lineage 16 builds). I was ready to accept device failure (as it has all original parts from ~9 years ago). However, RR 7.1.2 is stable for me, as is the 10/28 build of L16)
It has occurred to me that was around the time you added some slight overclocking? Does this sound possible?
Again, Thank You for your quality work!
xtoad said:
I have been unable to get through setup without reboots or boot loops. (I had also the same problem with the last few Lineage 16 builds).
Click to expand...
Click to collapse
With lineageos 16? Really? This should be stable, no one reported such issues before.
This rom is early alpha, so it could be, but my devices are all booting and are still on switched since yesterday,
but there is still much work to do.
xtoad said:
It has occurred to me that was around the time you added some slight overclocking? Does this sound possible?
Click to expand...
Click to collapse
And yes, with 1600 MHz the device runs stable!
I tried full wipes and both alpha versions (and the Gapps you referenced), but I always get restarts and boot loops during setup. Incidentally, the same for the December versions of your newest Android 9.
I have the October 28 version of your Android 9 currently and it seems stable. Also your latest RR is stable for me. I will continue to try the new releases.
xtoad said:
Incidentally, the same for the December versions of your newest Android 9.
Click to expand...
Click to collapse
Strange, please could you do a last_kmsg and send it to me?
But, so far you are the only person, I will try a fresh installation.
And further problems of LOS16, please post them there .
I will upload a new Testversion today (LOS18.1).
html6405 said:
Strange, please could you do a last_kmsg and send it to me?
But, so far you are the only person, I will try a fresh installation.
And further problems of LOS16, please post them there .
I will upload a new Testversion today (LOS18.1).
Click to expand...
Click to collapse
I will continue to test. Possibly just my device. Years ago I tried playing with overclock settings and was never able to get anything stable.
html6405 said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my preview build version of LineageOS 18.1 for our Samsung Galaxy Note 10.1 devices.
At first I want to thank @forkbomb444, @rINanDO, @ChronoMonochrome for all your work which helped me a lot to bring this up.
This is a preview build, so don't install it if you want a stable rom and don't report my already listet bugs!
I'm working nearly every day on our N80xx devices, because LOS18 runs much smoother than LOS17.1,
I will continue my work there.
Uncheck to overwrite recovery when you set it up, otherwise twrp will be gone and you have to reflash it!
When you have BitGapps installed, you have to reflash them after every update!
Here you can see how far everything is working for now.
Spoiler: Whats working
N8000, N8010, N8013, N8020:
Boots
Audio
Bluetooth
Graphics
Cameras
Sensors
Wifi
USB
Video playback (HW/SW)
Tethering via USB, WIFI and Bluetooth
consumerir transmitter
Stylus with gestures and hovering icon
sec keyboard dock
Spoiler: Whats not working
Video recording with both cameras
GPS
LiveDisplay
Magisk Root
OTA Updates
Screen Cast
Random reboots
Maybe more
Links:
Spoiler: N8010, N8013
TWRP 3.4.0 GT-N8010 for Odin
TWRP 3.4.0 GT-N8010 IMG
N8010 / N8013 Rom
If you are going to use BitGapps,
here you can download them:
BiTGApps
Custom Google Apps Project
bitgapps.github.io
For the others, you can use microG in future.
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Spoiler: How to install it?
Instructions
XDA:DevDB Information
[ROM][11.x][N8000/N801x/N8020][ALPHA] LineageOS 18.1, ROM for the Samsung Galaxy Note 10.1
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 11.x R
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.4.0
Based On: LineageOS
Version Information
Status: Alpha
Created 2020-12-21
Last Updated 2020-12-21
Click to expand...
Click to collapse
Thanks a lot.
are you also working for the rom for n8020?
fastjoy77 said:
are you also working for the rom for n8020?
Click to expand...
Click to collapse
Yes, but this will take some time.
Update 23.12.2020:
Build for N8000 and fixed RIL
Further ported palm rejection
Fixed some graphic crashes
Fixed some kernel crashes
Removed dangerous recovery flash option
More small things... It was a long day
I'm really struggling these day's with AFH, all servers are very slow.
As soon as I managed this, the links will be updated.
And dont forget, if you had BitGapps installed, you must flash them afterwards,
otherwise it wont boot.
Links are up!
html6405 said:
Links are up!
Click to expand...
Click to collapse
Thanks. You are Ironman.