Related
I've got a problem with calls. On stock ROMs and Paranoid Android, with every kerenels.
Sometimes I can't hear the person with who I'm talking but only on "normal mode". When I activate loudspeaker or plug in headphones I can hear without problems but after deactivating or plugging out the problem comes back and I can't hear anything. This occurs not always but very often.
Can someone helps?
I had this issue you may want to check with other people around here who are running cyanogenmod as far as I know mine was spoiled so I had to change it no idea if it was cause by cyanogenmod highly doubt it
I have the same issue! I actually had it when I was running OEM software, before rooting I sent it in to sony with the complaint 3 times. Each time they returned it with simply a software update applied.
I find if you cover and uncover the light sensor a couple of times it tends to fix itself, but its frustrating!
Yes, very frustrating! But this must be a software defect.
Maybe someone could make a fix...
Any help?
I highly doubt that it is a software defect issue but if it is a really software defect issue causing the ear speaker to fail then sony has some explaining to do nevertheless some of them reported the same issue with cyanogenmod 11.0 so honestly I dont know what is causing this but overall it seems like quite a big issue..
http://talk.sonymobile.com/t5/Xperi...e-can-t-hear-me-with-my-xperia-zl/td-p/758763
did you amplify the speaker or did anything to it, in the past etc ? like fauxsound
if you never did did you remain on stock kernel with cm11 all the way
Yes. I used some mods like pxa, but without any mods and with the problem exists
kael2404 said:
Yes. I used some mods like pxa, but without any mods and with the problem exists
Click to expand...
Click to collapse
then your hardware is damage sent it to the service centre
But it exists only sometimes and mostly with weak range
kael2404 said:
But it exists only sometimes and mostly with weak range
Click to expand...
Click to collapse
yeah it is damaged how long did you have your xperia z cause I had mine for 1 year 3 months before it died today it works fine.
huh? so what is causing this? sound-mods or just bad luck? had my xperia z 1 year 4 months and so far its ok... (*touch wood*) will be gutted if it dies...
must be sound mod blow out the speaker o.o no idea but I got mine fully replaced.
I had the same Problem. After installing Sound About from playstore and disabled headphone detection the Problem is gone
haha it isn't the old 'dust in the headphone socket' problem is it?
I've experienced some serious touch issues in the past two days. It's happened very randomly and I can't replicate the issues. The screen losses touch sensitivity and I can't do anything, then it randomly comes back after 10 seconds only to animate every touch I made during the 10 second lull.
Has anyone had any touch issues like me?
Edit: disregard this post. got the forums mixed up with another device.
bryancotton84 said:
I've experienced some serious touch issues in the past two days. It's happened very randomly and I can't replicate the issues. The screen losses touch sensitivity and I can't do anything, then it randomly comes back after 10 seconds only to animate every touch I made during the 10 second lull.
Has anyone had any touch issues like me?
Click to expand...
Click to collapse
sounds like a software glitch, is anything eating up the processor?
I'm on LRX210 out of the box. I haven't had any battery stat app running but nothing unusual is going on in the regular battery app
I have this issue as well. Drives me nuts when I'm playing clash of clans. Found a sprint forum post that says it could relate to screen protectors? I have an invisible shield on right now.
Mauk80 said:
I have this issue as well. Drives me nuts when I'm playing clash of clans. Found a sprint forum post that says it could relate to screen protectors? I have an invisible shield on right now.
Click to expand...
Click to collapse
I have a screen protector but I've never had issues with it before. The touchscreen is COMPLETELY unresponsive 100% of the time
cowkong said:
I have a screen protector but I've never had issues with it before. The touchscreen is COMPLETELY unresponsive 100% of the time
Click to expand...
Click to collapse
Have you updated to 5.1? Since 5.1, there were significant changes that appear to have been made to proximity sensor that seem to be affected by any sort of screen protector that may cover it. If your protector covers the sensor, then I suggest removing it.
I haven't. I currently have the notification on my lockscreen (since I can still use the power button and view that basic info). It simply just stopped working while I was using it. Going into the Sprint store early this afternoon
My N6 arrived yesterday and was immediately unusable. The keyboard filled in a ton of garbage when I was asked to first enter my name ... Power cycled to try again and have had nothing but reliability issues with typing at times the screen will lock while trying to type (no response) or assume I've clicked when I haven't which makes accurate data entry impossible.
wiped, reset and upgraded software from 5.0 to 5.01 to 5.1 - had to remove my ATT sim which initially blocked this process and reset. Issues are still present seems like the screen is defective.
Support has issued an RMA to return the device after suggesting they would replace. Not a great start.
im having the same issue with my nexus, i went back to stock, not even rooted anymore, still doing it, its driving me nuts..
RMA. It's quite obvious you have a hardware problem.
graydiggy said:
RMA. It's quite obvious you have a hardware problem.
Click to expand...
Click to collapse
I'm actually not so sure that it is. I've seen this issue intermittently across 3 different devices, but only on 5.1.1 firmwares.
semperfi123 said:
I'm actually not so sure that it is. I've seen this issue intermittently across 3 different devices, but only on 5.1.1 firmwares.
Click to expand...
Click to collapse
Although we're in an pls thread, I tend to agree. If it was a hardware issue, I don't think we'd see the OS acting out the touches later.. It means the hardware actually accepted the input but the OS didn't do any thing., Likely an OS hang or something.
bryancotton84 said:
I've experienced some serious touch issues in the past two days. It's happened very randomly and I can't replicate the issues. The screen losses touch sensitivity and I can't do anything, then it randomly comes back after 10 seconds only to animate every touch I made during the 10 second lull.
Has anyone had any touch issues like me?
Click to expand...
Click to collapse
I have a Samsung Tab 3 and recently the touch screen has gone haywire. I drop a troop at 12oc and heal spell drops randomly at 6oc or wherever. I click on the screen and the screen zooms in and out irradictly . Trying to do a raid must less a war attack is impossible. Anyone have the same issues?
[email protected] said:
I have a Samsung Tab 3 and recently the touch screen has gone haywire. I drop a troop at 12oc and heal spell drops randomly at 6oc or wherever. I click on the screen and the screen zooms in and out irradictly . Trying to do a raid must less a war attack is impossible. Anyone have the same issues?
Click to expand...
Click to collapse
This is a N6 thread [emoji4]
****UPDATE: *****
This is what happens https://imgflip.com/gif/1xvxm0
What can be the cause of this? Does this happen to any of you as well? Should i open the casing and see if there is anything touching the metal casing that should not ?
****EO UPDATE ****
I have been testing with both
Settings -> Developer Options - > Show Pointers (and looking at the top left that says x/x points)
or
Using a multitouch test app like so https://play.google.com/store/apps/details?id=com.the511plus.MultiTouchTester
The latter is nice because it has big handlers and you can clearly see the point/touch flickering like loosing and creating point (hence creating a new point ID)
From what i can say in Marshmallow it worked way better, on the last 2 Nougat updates i saw that at the 7th point it started to do the flickering and with this one it starts at the 5th point.
With 3 fingers screenshot disabled (and all the gestures for that matter) as i know it would create a conflict.
Just tested in a Motorola with Marshmallow and it created the 10 points flawlessly.
I wonder if any of you noticed the same or is something off with my touchscreen?
Might it be a Nougat thing ?
Any known solutions?
I searched around and nothing Nougat related seem to pop up
Just tested with both OP2 and a Moto G5 and they both work great, actually it even worked great on my Samsung Galaxy i9000
I have noticed that for the last 2 updates or so multitouch capability has been decreasing.
When are you ever going to use ten fingers to multitask? If it wasn't for the screenshot gesture, we wouldn't even be using three.
JarJarWinks said:
When are you ever going to use ten fingers to multitask? If it wasn't for the screenshot gesture, we wouldn't even be using three.
Click to expand...
Click to collapse
That is irrelevant for what i am trying to figure out, what i want to know is if it is a HW problem by default or just my HW is faulty or even if it is a Nougat problem.
It works flawlessly on other less capable phones
Either software or hardware fault I would say. I just tried it out without any flickering with 10 fingers on my 3t running latest unofficial LineageOS 15/Oreo ROM.
pitrus- said:
Either software or hardware fault I would say. I just tried it out without any flickering with 10 fingers on my 3t running latest unofficial LineageOS 15/Oreo ROM.
Click to expand...
Click to collapse
Thank you, from what i get so far is a Nougat thing, all the users that have Oreo seems to work fine
Conductive electricity ?
Ok some pretty strange updates...
I accidentally tested it on a metal table and it worked perfectly, which lead me to think that it might be due to conductive energy or something.
So i tried the test on a wooden table and it does flicker and loose touches, so i pressed with a finger on a metal part of the OP3T casing and the points are registered properly.
I had made a video so people don't think i am crazy here is the result https://imgflip.com/gif/1xvxm0 at this point i can say that is directly related.
What can be the cause of this? Does this happen to any of you as well? Should i open the casing and see if there is anything touching the metal casing that should not ?
anyone ?
This is a non issue honestly. If it doesn't change how your phone functions in day to day practical use, you probably shouldn't bother with something like that. The touch display functionally is fantastic especially the screen colors and with the recently fixed touch latency it does happen to be one of the best screens on the market despite its lower resolution. Factually you won't use more than a three touch input so. IMHO
nagi_007pk said:
This is a non issue honestly. If it doesn't change how your phone functions in day to day practical use, you probably shouldn't bother with something like that. The touch display functionally is fantastic especially the screen colors and with the recently fixed touch latency it does happen to be one of the best screens on the market despite its lower resolution. Factually you won't use more than a three touch input so. IMHO
Click to expand...
Click to collapse
It is definitely a problem did you watched the video ? because it seems like a real hard problem to me, use cases for you might be different from others. My old samsung galaxy i9000 as well as my OP2 did not had that problem
It may be a problem for one and may not be a problem in another's eyes.
To address your issue, have you tried switching ROM's? I don't think it could be a Nougat problem, but you might as well try Oreo or even MM.
This may sound funny, but have you tried with another person's fingers?
thes3usa said:
It may be a problem for one and may not be a problem in another's eyes.
To address your issue, have you tried switching ROM's? I don't think it could be a Nougat problem, but you might as well try Oreo or even MM.
This may sound funny, but have you tried with another person's fingers?
Click to expand...
Click to collapse
I had the feeling that it might be from the updates (still using official OP updates) but right now i think it might be hardware. Yes i tried with other fingers, thinking about opening the phone to see if there is something touching the metal case inside.
My mi 9 seems to be able to only detect 1 finger. Completely wiped phone and problem still persist. Anyone with same issue or able to fix issue?
I have the same problem. Have you found any solution?
youtube.com/watch?v=dLa-oHLig7U
I have that same problem. Could you help
Happened the same issue to my Mi9. Multi touch was working normally but suddenly it stopped working while I was zooming on a web page. Then I made a factory reset but still didn't work. Today I updated to Miui 12 hopping the problem would be solved but still no success. I think this bug is related to Android 10 as I saw elsewhere someone rolled back to Miui 10/Android 9 and things got to normal. On the other hand this is not a hardware failure for sure since multi touch keeps working normally on apps running in game turbo mode.
So, has anyone found how to kill this annoying bug?
Thanks for any help.
ive been searching everywhere how to fix this. i already email xiaomi about this issue. still didnt find clue how to fix this bug. still hoping that xiaomi will fix this issue.
This issue is a shame for Xiaomi!
As far as I know the only solution is to downgrade to Miui10 and stuck on this version or take the risk to upgrade to Miui11 (not recommended for obvious reasons) or the fresh new Miui12. So far I've been using the "turbo game" thing to workaround the bug. I had to install some alternative apps from Google Play (such as Chrome Beta, other gallery app, Google Maps Go...) to use instead of the stock apps so I can use them with "turbo" and get pinch to zoom working. This is not the best way to solve the issue -- the ideal is to get multi touch back working again without the need to resort to any tricks -- however it works very well. Maybe one of these days I'll get some patience to setup the good old Miui10 again...
i also have this ghost touch on the upper part of the screen. it came same time as the multi touch issue. it cant even fix by game turbo. i cant even play games normally like moba or fps game. i dont know if its just me have this ghost touch issue. its a big shame for xiaomi flagship phone?
No news about this issue? Everything works fine with Pixel Experience in my MI9 but multitouch. I remmember I solved another problem (auto-rotate didn't work for the display) and I solved it flashing only last version of "persist.img".
Same here bro!
I bought my Mi 9 in February and everything worked well. I also upgraded to MIUI 12 with no problems at all, then suddenly multitouch stopped working.
If I flash Pixel Experience will the problem be solved?
03jack said:
Same here bro!
I bought my Mi 9 in February and everything worked well. I also upgraded to MIUI 12 with no problems at all, then suddenly multitouch stopped working.
If I flash Pixel Experience will the problem be solved?
Click to expand...
Click to collapse
No way, Installing PE doesn't solve the problem.
I'm going to try it with new kernels and FWs.
ommerus said:
No way, Installing PE doesn't solve the problem.
I'm going to try it with new kernels and FWs.
Click to expand...
Click to collapse
Let me know if it works
03jack said:
Let me know if it works
Click to expand...
Click to collapse
It doesn't work at all... nothing... so tired of this...
ommerus said:
It doesn't work at all... nothing... so tired of this...
Click to expand...
Click to collapse
Try to flash MIUI 10... I read somewhere it should work, because MIUI 10 is built on Android 9, which doesn't have this issue
same i have this issue, i tried miflash. the only workaround are miui 10 and game turbo method.
also i have this nonresponsive part of the upper screen, right where most game analog button placed. idk if this "dead touch" is connected to this multitouch issue
This was the first and probably the last Xiomi I bought. Back to iOS. Bought a second hand iPhone 11 in mint condition. Working rock solid! Crap Mi9!!!
renz555666 said:
i also have this ghost touch on the upper part of the screen. it came same time as the multi touch issue. it cant even fix by game turbo. i cant even play games normally like moba or fps game. i dont know if its just me have this ghost touch issue. its a big shame for xiaomi flagship phone?
Click to expand...
Click to collapse
Gnonymous7 said:
same i have this issue, i tried miflash. the only workaround are miui 10 and game turbo method.
also i have this nonresponsive part of the upper screen, right where most game analog button placed. idk if this "dead touch" is connected to this multitouch issue
Click to expand...
Click to collapse
Have the same problem here!!!
Upper screen DEAD
Annoying ghost touch on upper screen
Have to type multiple times because It keeps ghost touching...
Can't sell the phone, because of these issues...
Miss my Galaxy note
Is there a fix to this issue now? GameTurbo enhances the touch so that multitouch works. There must be a fix to this.
Who else are facing the same problem ?
1)Initially, when I unlock phone by pressing power button the display was changed to dim colour(mostly yellowish) and with horizontal lines displayed when the brightness is below 50%. After tried with multiple times pressing on power button the display came back to normal.
2) Next stage, it's not solved with power button. I have to keep my phone aside for some time to get back to normal display. It's been 15 to 20 min then.
3) Now, I would get normal display only in morning. Else, I need to keep my phone idle without touching for at least 4 to 5 hours. I've also changed screen power off time from 30 Sec to 10 Minutes. So that my screen wont turn off and I can keep the normal display. If I forgot to use or kept aside more than 10 min then my screen would go off and display would gone again and irritation starts with that discoloration problem..
4) If display changes to yellowish to reduce the horizontal lines problem I need to increase the brightness to 80 or 85% but this causing my phone with another problem "heating issue"
Samsung haven't responded on this issue yet, how could we bring up the issue and get the proper resolution from Samsung.
This happened after last March update installation?
What note 9 do you have?
Probably not a hardware fault if it happened after recent software update.
A number of note9 affected although samsung seems to disagree at the moment.
Hello,
I also have a problem with the display after waking up with the POWER button. There are tinted colors distorted and some stripes like dim lines and slow refreshing. Everything started after updating to Android 10. In fact, when the display lights up incorrectly, it starts to heat up from the bottom. Putting the smartphone aside for a moment or cooling down causes the display to work correctly.
Workaround? I turned on Active Display and first knock to activate it, then the display lights up correctly and then I unlock the screen and use normally. It is known that battery consumption increases. Of course mine is Exynos.
hi guys,, i remember a similar experience sometime back.. try this. if u have turn on the proximity sensor i mean the advance feature where the phone screen doesn't turn on while in pocket , switch it off and restart the phone and see if the problem still exist.
i am having same issue
is anybody on xda come to rescue our issue?? friends need urgent help out ., if the solution is to reinstall the firmware kindly tell how to ?? while phone is just giving odd lines and not responding to touch even ??
ahmadtanveer7007 said:
is anybody on xda come to rescue our issue?? friends need urgent help out ., if the solution is to reinstall the firmware kindly tell how to ?? while phone is just giving odd lines and not responding to touch even ??
Click to expand...
Click to collapse
whats the firmware version u are having now and phone model?
Try wiping the cache partition in Recovery Mode. If that doesn't work then back up your device and manually reinstall the OS back onto your device.
Im having the exact problem. I flash LineageOS and it worked by max brightness then back to auto. I installed brightness widget to max brightness and back to auto everytime I turn on screen.
This issue is popular after March update. I tried everythings you mentioned above, reset, flash new firmware, even April update, wipe cached, flash cooked rom, heat screen, turn off features, disable gpu overlay, etc... Samsung Vietnam guaranteed can fix with new screen but I'm out of warranty.
I dont have any issues us unlocked snapdragon xaa model on latest android 10 version.
Can we confirmed that a screen replacement fixes the display problem or is it still a software issue
Signup said:
Who else are facing the same problem ?
1)Initially, when I unlock phone by pressing power button the display was changed to dim colour(mostly yellowish) and with horizontal lines displayed when the brightness is below 50%. After tried with multiple times pressing on power button the display came back to normal.
2) Next stage, it's not solved with power button. I have to keep my phone aside for some time to get back to normal display. It's been 15 to 20 min then.
3) Now, I would get normal display only in morning. Else, I need to keep my phone idle without touching for at least 4 to 5 hours. I've also changed screen power off time from 30 Sec to 10 Minutes. So that my screen wont turn off and I can keep the normal display. If I forgot to use or kept aside more than 10 min then my screen would go off and display would gone again and irritation starts with that discoloration problem..
4) If display changes to yellowish to reduce the horizontal lines problem I need to increase the brightness to 80 or 85% but this causing my phone with another problem "heating issue"
Samsung haven't responded on this issue yet, how could we bring up the issue and get the proper resolution from Samsung.
Click to expand...
Click to collapse
I have the same problem at the beginning it was when the phone was warm now the screen is yellow and when I lower the brightness I have lines coming out
jonaki said:
I have the same problem at the beginning it was when the phone was warm now the screen is yellow and when I lower the brightness I have lines coming out
Click to expand...
Click to collapse
Hi Bro, the same problem now facing by many users. We have created a Telegram group do discuss about the issue. Plz join there.
https://t.me/samsungDisplayProblem
luisfer21069 said:
Can we confirmed that a screen replacement fixes the display problem or is it still a software issue
Click to expand...
Click to collapse
No one knows what is the exact cause here, its noticed in many devices right after this March update but few are noticed months before. But, now the problem came to many users at same time. So its been brought up by many tech blogs, websites.
pheonixxdark said:
hi guys,, i remember a similar experience sometime back.. try this. if u have turn on the proximity sensor i mean the advance feature where the phone screen doesn't turn on while in pocket , switch it off and restart the phone and see if the problem still exist.
Click to expand...
Click to collapse
Thanks for tour suggestion, however I couldn't find the the exact option you mentioned in advanced features plz look into below once and help me to solve this.
joedellosso69 said:
This happened after last March update installation?
What note 9 do you have?
Click to expand...
Click to collapse
Hi, Yes like many other saying I too have this problem after March update only. I'm using Exynos one and also please have a look at below screenshot. Please let me know if you need anything further to know about the issue also attaching the links about the issue.
https://r2.community.samsung.com/t5...tion-amp-Overheating-Posting-4th/td-p/4049910
https://www.sammobile.com/news/galaxy-note-9-march-2020-security-update-broken-screen/
https://www.androidauthority.com/samsung-galaxy-note-9-march-update-broken-displays-1103766/
https://www.androidheadlines.com/20...in-of-broken-display-after-march-update.html/
pheonixxdark said:
whats the firmware version u are having now and phone model?
Click to expand...
Click to collapse
Please have a look into below screenshot. Plz let me know if you need any other info.
Rosli59564 said:
Probably not a hardware fault if it happened after recent software update.
A number of note9 affected although samsung seems to disagree at the moment.
Click to expand...
Click to collapse
Yes Bro but, We haven't found any fix for this till now.
Signup said:
Hi, Yes like many other saying I too have this problem after March update only. I'm using Exynos one and also please have a look at below screenshot. Please let me know if you need anything further to know about the issue also attaching the links about the issue.
https://r2.community.samsung.com/t5...tion-amp-Overheating-Posting-4th/td-p/4049910
https://www.sammobile.com/news/galaxy-note-9-march-2020-security-update-broken-screen/
https://www.androidauthority.com/samsung-galaxy-note-9-march-update-broken-displays-1103766/
https://www.androidheadlines.com/20...in-of-broken-display-after-march-update.html/
Click to expand...
Click to collapse
I'm having the exynos version too but with ITV (Italy) firmware ...never had this problem and now I'm on April's version after March's version.
This looks a little bit like what happened to the S5 years ago when after 1 and a half/ 2 and a half year's the screan began flickering, having green spots or lines, randomly didn't go on with low luminance settings since it completely died....a lot of people said on forum's that it was the screen and a replacement solves, but when it happened to me years ago the Samsung assistance center told me that it was another component (never told me what it was) causing the issue and once they changed it , they solved the problem.
So, after my experience with the S5, don't know what to think now for what is happening to some guys even if I think that this issue might depend with something happening after marchs update because for the too many people having it after the update, coincidences are not credible.
joedellosso69 said:
I'm having the exynos version too but with ITV (Italy) firmware ...never had this problem and now I'm on April's version after March's version.
This looks a little bit like what happened to the S5 years ago when after 1 and a half/ 2 and a half year's the screan began flickering, having green spots or lines, randomly didn't go on with low luminance settings since it completely died....a lot of people said on forum's that it was the screen and a replacement solves, but when it happened to me years ago the Samsung assistance center told me that it was another component (never told me what it was) causing the issue and once they changed it , they solved the problem.
So, after my experience with the S5, don't know what to think now for what is happening to some guys even if I think that this issue might depend with something happening after marchs update because for the too many people having it after the update, coincidences are not credible.
Click to expand...
Click to collapse
Yes, many people were facing this problem and how many times we have contacted the Samsung they are behaving like they just hearing the issue for the first time. Just created and posted the link in Members app and 67 members joined so far. Everyone having the display problem out of nowhere. All of them on out of warranty except one or two. Still members app floating with the display problem messages.
Display issue got noticed in S20 too but they immediately released the security patch and solved it. Don't know why they were silent on Note 9.
https://www.androidauthority.com/samsung-galaxy-s20-ultra-green-tint-1107738/