Database Develop

[Q] Need to wait a while for the screen to turn on

Hey,
So my dad isnt exactly satisfied with the custom ROM I flashed on his device, he needs to wait about 4 - 5 seconds (!) when theres an incoming call for the screen to turn on. The ringtone will keep on going off during that few seconds, but the screen will be black.
So I tested it on my Nexus 4, and no such issue has been spotted by me. Although, on his device, no matter how many times I tried, the issue was never gone and I had to wait a couple of seconds for the screen to turn on so I could see who's calling.
I'm not sure whether it is a kitkat issue or not, I tried 2 different roms, first BeanStalk, and now CyanFox, both had the same issue.
I also tried to flash CM10.1, but the keyboard kept on crashing after a fresh flash, wipes didnt help (maybe someone could give me a hand here?).
Another question is, where can I find some good call recording app? the ones from the play store aren't good, they only record one side of the call, never both
tl;dr:
is there some setting that I should change for the screen to turn on quicker when theres an incoming call on kitkat?
what to do if I want to downgrade from kitkat to jellybean?
is there some GOOD call recorder app around?
thank you

Pawelss said:
Hey,
So my dad isnt exactly satisfied with the custom ROM I flashed on his device, he needs to wait about 4 - 5 seconds (!) when theres an incoming call for the screen to turn on. The ringtone will keep on going off during that few seconds, but the screen will be black.
So I tested it on my Nexus 4, and no such issue has been spotted by me. Although, on his device, no matter how many times I tried, the issue was never gone and I had to wait a couple of seconds for the screen to turn on so I could see who's calling.
I'm not sure whether it is a kitkat issue or not, I tried 2 different roms, first BeanStalk, and now CyanFox, both had the same issue.
I also tried to flash CM10.1, but the keyboard kept on crashing after a fresh flash, wipes didnt help (maybe someone could give me a hand here?).
Another question is, where can I find some good call recording app? the ones from the play store aren't good, they only record one side of the call, never both
tl;dr:
is there some setting that I should change for the screen to turn on quicker when theres an incoming call on kitkat?
what to do if I want to downgrade from kitkat to jellybean?
is there some GOOD call recorder app around?
thank you
Click to expand...
Click to collapse
If you still on cm10.1 then download keyboard from market and you are good to go Also stock 4.1.2 has this lag issue when incoming call its pretty annoying really

tuncay_93 said:
If you still on cm10.1 then download keyboard from market and you are good to go Also stock 4.1.2 has this lag issue when incoming call its pretty annoying really
Click to expand...
Click to collapse
hey, thanks for your reply
actually no, STOCK 4.1.2 didnt have this issue, it started to show when I flashed 4.4.2 on it, is there some sort of fix for this or do I have to downgrade to JB? I'd rather stick to KK as I prefer it more.
on the other hand my dad hated google hangouts and he wants the stock messaging app back, I guess I can only go with CM
also I cant install a keyboard from the market, because I cant even log in to my google account, I cant get through the setup without a few things crashing over and over again, every second or so. the keyboard doesnt even show up

delete the latinIme.apk from the zip file you are trying to flash and substitute it with one from the other roms you tried flashing.
I know how to control the delay with which the ringer starts but not screen :s
These commands I think only help when call ends but it doesn't hurt to try, add them (or check the values if already present)
to build.prop in zipfile before you flash it
Code:
ro.lge.proximity.delay=5
mot.proximity.delay=5
I am on kitkat right now and have no lag issue...have you tried changing kernel?

Rudjgaard said:
delete the latinIme.apk from the zip file you are trying to flash and substitute it with one from the other roms you tried flashing.
I know how to control the delay with which the ringer starts but not screen :s
These commands I think only help when call ends but it doesn't hurt to try, add them (or check the values if already present)
to build.prop in zipfile before you flash it
Code:
ro.lge.proximity.delay=5
mot.proximity.delay=5
I am on kitkat right now and have no lag issue...have you tried changing kernel?
Click to expand...
Click to collapse
hey, thanks for your reply
I flashed Nameless ROM and surprisingly the lag issue is gone, and due to stripped gapps I flashed, I got the old messaging app back, which is quite the perfect combo, now the only thing I am missing is a good call recording app, is there a chance you can suggest one to me?
thanks again!

Pawelss said:
hey, thanks for your reply
I flashed Nameless ROM and surprisingly the lag issue is gone, and due to stripped gapps I flashed, I got the old messaging app back, which is quite the perfect combo, now the only thing I am missing is a good call recording app, is there a chance you can suggest one to me?
thanks again!
Click to expand...
Click to collapse
Still havent tried nameless but i did red the thread about it. Seems everyone likes it. It should be good

tuncay_93 said:
Still havent tried nameless but i did red the thread about it. Seems everyone likes it. It should be good
Click to expand...
Click to collapse
well I tried it out, the rom is nice and all, but my phone is extremely slow, the lag issue with phone calls is back, sometimes turning the screen off is impossible, or takes up to 2 minutes (!). turning it back on isnt much better either, I dont know what the problem is, the same thing happened on the BeanStalk ROM so I assume it isnt a software issue, but a hardware one, do you have any ideas what could be the problem and how can I solve it?

I want to tell you my experience about custom roms.
I don't know if you tried this combo: CM11 + kicos kernel (modified iodak's kernel) + minimal PA gapps
I works for me very well.

LGaljo said:
I want to tell you my experience about custom roms.
I don't know if you tried this combo: CM11 + kicos kernel (modified iodak's kernel) + minimal PA gapps
I works for me very well.
Click to expand...
Click to collapse
yeah, but shouldnt all the 4.4.2 ROMs be quite snappy? doesn't kitkat reduce the hardware requirements? why would JB work fine (or so I think, I'll go back to stock in a few mins and see) and KK be laggy as hell?
I've got a theory, I'm not a hardware guy and I dont know if I'm right or not, but:
could be that one of the cores is damaged and the system tries to switch some tasks to the damaged core (if android handles different cores the way I think) and that core doesnt really work the way it should, causing the entire system to work like a granny?

Pawelss said:
well I tried it out, the rom is nice and all, but my phone is extremely slow, the lag issue with phone calls is back, sometimes turning the screen off is impossible, or takes up to 2 minutes (!). turning it back on isnt much better either, I dont know what the problem is, the same thing happened on the BeanStalk ROM so I assume it isnt a software issue, but a hardware one, do you have any ideas what could be the problem and how can I solve it?
Click to expand...
Click to collapse
This is probably some wake/lock problem with software. Also on my o2x i've noticed strange lag when i press the power key it has lag until the screen comes on buttons below the screen light and after a couple of seconds the screen. It has 4.3 CM rom there if your father is using this phone i would suggest you some stock based rom with custom kernel. They should not have problems like these.

tuncay_93 said:
This is probably some wake/lock problem with software. Also on my o2x i've noticed strange lag when i press the power key it has lag until the screen comes on buttons below the screen light and after a couple of seconds the screen. It has 4.3 CM rom there if your father is using this phone i would suggest you some stock based rom with custom kernel. They should not have problems like these.
Click to expand...
Click to collapse
That still the best sollution for him - optimized kernel with stable ROM. He probably isn't techno freak?

tuncay_93 said:
This is probably some wake/lock problem with software. Also on my o2x i've noticed strange lag when i press the power key it has lag until the screen comes on buttons below the screen light and after a couple of seconds the screen. It has 4.3 CM rom there if your father is using this phone i would suggest you some stock based rom with custom kernel. They should not have problems like these.
Click to expand...
Click to collapse
could be, however, it isnt only for the power button, when the screen is off and a call is coming, it needs a few seconds for the screen to turn on, after the call is done, the system is all choppy and laggy. Turning the screen off after that is also nearly impossible, due to power button malfunction. I went back to stock for now and I'll see if the lag is gone, if it isnt, then its probably a hardware issue.
edit:
yeah, I'm on stock 4.1.2 and the issue isnt gone.
crap.

sounds like a problem in the timing the processor uses for scaling frequencies...
hav no idea what could be causing it unless you have some kernel tweak app and set wrong values

Have you tried clean flashing the Roms you installed? Have you Factory-Reset, Cleared cache, cleared Dalvik cache, and maybe did a system partition format before flashing?
Inviato dal mio GT-P3110 utilizzando Tapatalk

[Q] Incoming call delay after updating to CarbonROM KitKat 4.4

Because of the very laggy behaviour of my I9070 after the official upgrade to JB, I decided to go for KitKat after reading good reviews about it.
All this is pretty new for me, but I succesfully rooted the phone, installed the ClockWorkMod recovery tool and flashed to Android 4.4.4.
The build number according to the settings menu is: carbon-janice-userdebug 4.4.4 KTU84P 3a697bce2f test-keys
Overall the performance is excellent and the nasty lags in the youtube app are completely gone so I can finally watch movies again Also I am pleased about the look and feel of KitKat.
The problem is that when receiving an incoming call, it appears that the caller does not hear my voice during the first 5 seconds or so. Mostly this is the time that I say "hello <my name> speaking" but this is not heared by the caller. Now I am forced to wait those few seconds before saying my name. I tested it with my other home phone line and this unwanted behaviour does seem to be persistent.
It is pretty annoying and really a flaw to this otherwise great update. Any ideas how to fix this?

Klaas68 said:
Because of the very laggy behaviour of my I9070 after the official upgrade to JB, I decided to go for KitKat after reading good reviews about it.
All this is pretty new for me, but I succesfully rooted the phone, installed the ClockWorkMod recovery tool and flashed to Android 4.4.4.
The build number according to the settings menu is: carbon-janice-userdebug 4.4.4 KTU84P 3a697bce2f test-keys
Overall the performance is excellent and the nasty lags in the youtube app are completely gone so I can finally watch movies again Also I am pleased about the look and feel of KitKat.
The problem is that when receiving an incoming call, it appears that the caller does not hear my voice during the first 5 seconds or so. Mostly this is the time that I say "hello <my name> speaking" but this is not heared by the caller. Now I am forced to wait those few seconds before saying my name. I tested it with my other home phone line and this unwanted behaviour does seem to be persistent.
It is pretty annoying and really a flaw to this otherwise great update. Any ideas how to fix this?
Click to expand...
Click to collapse
That is happening on every 4.4 I think. It was on CM10.1, CM10.2 too.

Lag on calling screen
Klaas68 said:
Because of the very laggy behaviour of my I9070 after the official upgrade to JB, I decided to go for KitKat after reading good reviews about it.
All this is pretty new for me, but I succesfully rooted the phone, installed the ClockWorkMod recovery tool and flashed to Android 4.4.4.
The build number according to the settings menu is: carbon-janice-userdebug 4.4.4 KTU84P 3a697bce2f test-keys
Overall the performance is excellent and the nasty lags in the youtube app are completely gone so I can finally watch movies again Also I am pleased about the look and feel of KitKat.
The problem is that when receiving an incoming call, it appears that the caller does not hear my voice during the first 5 seconds or so. Mostly this is the time that I say "hello <my name> speaking" but this is not heared by the caller. Now I am forced to wait those few seconds before saying my name. I tested it with my other home phone line and this unwanted behaviour does seem to be persistent.
It is pretty annoying and really a flaw to this otherwise great update. Any ideas how to fix this?
Click to expand...
Click to collapse
It happsens in all roms even in CM too
but now after 4.4.3 in carbon rom it has almost stopped....
Reflash your rom and try it
I use the same
hit the THANKS button if it helped you

krazzykuldeep said:
It happsens in all roms even in CM too
but now after 4.4.3 in carbon rom it has almost stopped....
Reflash your rom and try it
I use the same
hit the THANKS button if it helped you
Click to expand...
Click to collapse
I use Carbon rom 4.4.4, to be exactly the ROM-file CarbonKK_janice-4.4.4-20140627.zip
AFAIK this is still the most recent version. Maybe the problem was even worse with the previous builds.
But I did not have this problem with the, otherwise pretty laggy official JB upgrade from Samsung.... lets hope for a new update from Carbon that gets rid of the issue.

Klaas68 said:
I use Carbon rom 4.4.4, to be exactly the ROM-file CarbonKK_janice-4.4.4-20140627.zip
AFAIK this is still the most recent version. Maybe the problem was even worse with the previous builds.
But I did not have this problem with the, otherwise pretty laggy official JB upgrade from Samsung.... lets hope for a new update from Carbon that gets rid of the issue.
Click to expand...
Click to collapse
Hmm
Have not downloaded this version bcos the mega downloader gets stuck all the time
if the problem exists then why dont you try the AOSP rom
Off course it does not provide with all the features but its quite stable and we definately have gravitybox or many other apps for the additional features

krazzykuldeep said:
Hmm
Have not downloaded this version bcos the mega downloader gets stuck all the time
if the problem exists then why dont you try the AOSP rom
Off course it does not provide with all the features but its quite stable and we definately have gravitybox or many other apps for the additional features
Click to expand...
Click to collapse
I will definately consider this, I have not a very clear view on the differences between the different ROMS and tend to get lost in the flood of information on this site and others... I am not interested in lots of features but just want a fast, lag-free phone with the normal features: email, gmail, whatsapp, youtube, Google maps etc. If AOSP is more stable than Carbon, I will surely try it.

Klaas68 said:
I will definately consider this, I have not a very clear view on the differences between the different ROMS and tend to get lost in the flood of information on this site and others... I am not interested in lots of features but just want a fast, lag-free phone with the normal features: email, gmail, whatsapp, youtube, Google maps etc. If AOSP is more stable than Carbon, I will surely try it.
Click to expand...
Click to collapse
I installed the AOSP rom and it seems stable and maybe the call delay issue is better, still have to test it more.
I do however miss some nice functions which were present of the Carbon ROM:
- separate lockscreen background
- disabling the annoying Google Now bar on the homepages
- some fine tuning in icon colors
- kliing an app by long-press the back button
- defining hotkeys e.g. for the camera
and some more..
Is there maybe some package to install to add functions like this to the AOSP ?

Klaas68 said:
...
Click to expand...
Click to collapse
Use Xposed module for all what you need. Gravity Box or others module..

R_a_z_v_a_n said:
Use Xposed module for all what you need. Gravity Box or others module..
Click to expand...
Click to collapse
Unfortunately the AOSP-4.4.4 ROM (build 20140620) is on second thoughts not working for me.
Though the install of the ROM and GApps went fine, I discovered that I had no internet when leaving my home with Wifi, and it appears that I had no connection with my provider and the icon always showed the R of "roaming".
Even after a new fresh install without the GApps the problem persists. The setting "Mobile data" appeared to be torned off, and ehen setting it to on, the triangle with exclamation mark and the (translated) message "The data connection has been broken because you left your home network while data roaming was turned off" (hope my translation makes sense).
So accessing my 3G network appears to be impossible and tham makes the build unusable for me. I installed the Carbon Janice 4.4.4 again and everything worked fine.
With the pa_gapps-mini.4.4.4 the system is up and running again and the incoming call delay is still somewhat of an issue but no show stopper. So for now I go that way...

Klaas68 said:
Unfortunately the AOSP-4.4.4 ROM (build 20140620) is on second thoughts not working for me.
Though the install of the ROM and GApps went fine, I discovered that I had no internet when leaving my home with Wifi, and it appears that I had no connection with my provider and the icon always showed the R of "roaming".
Even after a new fresh install without the GApps the problem persists. The setting "Mobile data" appeared to be torned off, and ehen setting it to on, the triangle with exclamation mark and the (translated) message "The data connection has been broken because you left your home network while data roaming was turned off" (hope my translation makes sense).
So accessing my 3G network appears to be impossible and tham makes the build unusable for me. I installed the Carbon Janice 4.4.4 again and everything worked fine.
With the pa_gapps-mini.4.4.4 the system is up and running again and the incoming call delay is still somewhat of an issue but no show stopper. So for now I go that way...
Click to expand...
Click to collapse
Check if you have set up APN, on some ROMs it is not possible to be set automatically by provider. So you need to fill it manually. And you must do factory reset on ROM change to avoid those kind of problems too.

shut_down said:
Check if you have set up APN, on some ROMs it is not possible to be set automatically by provider. So you need to fill it manually. And you must do factory reset on ROM change to avoid those kind of problems too.
Click to expand...
Click to collapse
Do you mean a factoery reset just after installing the ROM and Gapps? I think indeed I have not done that.
For now it is working fine with Carbon but I will definately remember your tips for a next flash

Klaas68 said:
Do you mean a factoery reset just after installing the ROM and Gapps? I think indeed I have not done that.
For now it is working fine with Carbon but I will definately remember your tips for a next flash
Click to expand...
Click to collapse
Yes, factory reset before or after (just need to to it when you change ROM) install of a new ROM. Unless you just doing update to new version of the same ROM. Then you do wipe cache and dalvik cache.

shut_down said:
Yes, factory reset before or after (just need to to it when you change ROM) install of a new ROM. Unless you just doing update to new version of the same ROM. Then you do wipe cache and dalvik cache.
Click to expand...
Click to collapse
OK I did those 3 steps before flashing the new ROM. Sometimes I even had to do it twoce because the ROM did not install and raised a error 7 or so...
I think it was more a problem with the APN configuration and never before needed to do this manually...

Updating from 4.4.2 to 4.4.4
Hello friends,
I am new on XDA forums.
I am currently using Carbon rom 4.4.2.
If i want to update it to 4.4.4 then will i lose my all Apps, games etc currently on my phone or not.
Thanks in Advance

harsh3793 said:
Hello friends,
I am new on XDA forums.
I am currently using Carbon rom 4.4.2.
If i want to update it to 4.4.4 then will i lose my all Apps, games etc currently on my phone or not.
Thanks in Advance
Click to expand...
Click to collapse
If you dirty flash (just wipe cache/dalvik and install) the new version, you want loose your apps etc.
But I would recommend to do a clean flash (factory reset and format system), but before backup your apps with Titanium. After installing the new version you can restore your apps and data.
But anyway, before wiping/installing anything do a nandroid backup. So if anything went wrong, you can go back in just a minute.

solution ?
Klaas68 said:
The problem is that when receiving an incoming call, it appears that the caller does not hear my voice during the first 5 seconds or so. Mostly this is the time that I say "hello <my name> speaking" but this is not heared by the caller. Now I am forced to wait those few seconds before saying my name. I tested it with my other home phone line and this unwanted behaviour does seem to be persistent.
It is pretty annoying and really a flaw to this otherwise great update. Any ideas how to fix this?
Click to expand...
Click to collapse
Has anyone solved this problem ? I have this problem with every rom that i've tried. I'm losing patience with android phone.

@ian2189
Dont blame google for samsung mistakes. It isnt android problem couz my friend is using sII and there isnt any problem. Our phone is not an flagship like s 5 or nexus 5 so it has problems.
But this dealy is usefull sometimes.
For example if u want to unsware the call and u are stressed u can take a deep breath before u hear voice for other side
Wysłane z Light-fonika 1-2 ....

...
MikiGry said:
@ian2189
Dont blame google for samsung mistakes. It isnt android problem couz my friend is using sII and there isnt any problem. Our phone is not an flagship like s 5 or nexus 5 so it has problems.
But this dealy is usefull sometimes.
For example if u want to unsware the call and u are stressed u can take a deep breath before u hear voice for other side
Click to expand...
Click to collapse
I am stressed when receiving an incoming call and caller don't hear me. I wait from mobile phone calling without problems.
I just wanted to know if there is a ROM without this problem or if anyone have solution.:cyclops:

@ian2189
This is our phones problem. 99% of the users (me too) were expiring this since gingerbread 2.3.6 . So i think there isnt a solution. I now why it is happening but it is unfixnable.
Wysłane z mojego nexusowego tablecika.....

Yeah... I even bought another phone because of this...

CyanogenMod 12 for HTC One Mini 2 (Memul)

Hi guys,
Thought I would start a thread for users of CyanogenMod 12 for HTC One Mini 2 (memul).
I have installed a nightly dated 24th February 2015. It seems to be working great, my only issues have been:
After phone restart, the first time you call someone you cant hear them. Call them again, the problem is fixed and doesnt seeem to come back for that contact. (will happen again for other contacts the first time you call them though).
Camera is very laggy and doesnt respond well at all...the viewfinder is super stuttery and laggy and when you hit the take a picture button it can take a second or two to respond. I dont use the camera much so it doesnt bother me.
Have had some problems with the music player not outputting music to the headphones after a while, but taking the headphones out, pressing play so it plays out the speaker, then putting the headphones back in fixes this. Again,
not a big issue.
Official TWRP stops working after going through setup, but factory reset from within CM12 fixes it if you do have to re-flash or something.
So I recommend CM12 latest nightly for our phone, its better than CM11 and actually had less problems than the Release channel rom for our device (CM11). Although that ROM says it has no known issues, there are known issues that have not been noted on the wiki.

Hey thanks for doing this, I am considering CM12 on my phone too. i use the loud speaker and the camera a lot, does this impact the sound quality? i really enjoy the boom sound on this phone.

ECEng said:
Hey thanks for doing this, I am considering CM12 on my phone too. i use the loud speaker and the camera a lot, does this impact the sound quality? i really enjoy the boom sound on this phone.
Click to expand...
Click to collapse
Loud speaker works fine, and one of the great things about cyanogenmod is the built in system level equalizer, so boom sound equivalent is built in. Camera, on the basis of the build i am using from mid Feb, is not so good...actually the pictures are not so bad but the actual viewfinder is very laggy and pressing the take shot button is slow to respond. It could be fixed in newer nightlies, I have been away from home for over a month but when i get back ill flash a new nightly.

snorglamp said:
Loud speaker works fine, and one of the great things about cyanogenmod is the built in system level equalizer, so boom sound equivalent is built in. Camera, on the basis of the build i am using from mid Feb, is not so good...actually the pictures are not so bad but the actual viewfinder is very laggy and pressing the take shot button is slow to respond. It could be fixed in newer nightlies, I have been away from home for over a month but when i get back ill flash a new nightly.
Click to expand...
Click to collapse
Thanks for the advice, I installed march 25th build last night.
From your first post, only problem i experienced was the camera, its still very laggy, and the picture quality dose not compare well to the original. I have tired third party camera app but no joy, similar issues. Other than that, happy to say every thing else is working fine, i will update regularly to see if camera improves.

Hi all,
I'm using CM12 since 2 weeks. In some case, the phone is very laggy. For example, with Chrome or also when opening new apps, of when i switch from app to other.
Maybe i'm not using the correct boot or recovery or radio.
Can you tell me which one is recommended with the CM12 ROM ?
Thanks.

mlhamdi said:
Hi all,
I'm using CM12 since 2 weeks. In some case, the phone is very laggy. For example, with Chrome or also when opening new apps, of when i switch from app to other.
Maybe i'm not using the correct boot or recovery or radio.
Can you tell me which one is recommended with the CM12 ROM ?
Thanks.
Click to expand...
Click to collapse
Hi there,
I have been flashing the latest nightly. I think we need to log a JIRA issue for the camera, but I havent checked if someone already did. It doesnt seem to be getting better does it?
Dont use chrome...if you dont like the cyanogen browser, try firefox XD
The best recovery is TWRP, see the other posts in our part of the forum about this. Make sure your get the U-RA version of TWRP as the official TWRP page doesnt list our device for latest versions.

Also I should note that the calendar doesnt work in this ROM in offline mode, which is true for all Cyanogen ROMs i believe. But the solution is to install from DroidForge the offline calendar account, and then you can enter items in the calendar without google calendar, or sync USB with outlook etc (latter requires purchase of sync program separately to go on your PC).

Bad news for CM12 on memul: the only developer u-ra has stopped working with our device. So there are no new nightlies anymore since 04/11 and we don't know when it will be going on.
Look here: http://forum.xda-developers.com/showthread.php?p=60126091

corbeau56 said:
Bad news for CM12 on memul: the only developer u-ra has stopped working with our device. So there are no new nightlies anymore since 04/11 and we don't know when it will be going on.
Look here: http://forum.xda-developers.com/showthread.php?p=60126091
Click to expand...
Click to collapse
That is bad news alright, Is there any way for me to get back to stock rom and wait for official lollipop release? I am quiet new to this.

Tempting Android N AOSP

Very tempted to update to Android N (Team FXP AOSP)
But I value my camera quality (Using DRM fix kernel, works great)
Knowing that the Xperia is never going to get android N, due to google removing the Z3's kernel from their source, would it be worth updating to AOSP, basically removing all the features that are so good?

You answered your own question, stick to stock if you want a camera that works 100% well. AOSP camera has never been good for any phone and the camera on Nougat barely works anyway.
Next best thing is Concept ROM, which still has a decent camera

I'm tempted to try Nougat AOSP. I don't mind losing the camera on Z3c that much since I prefer my camera on my G4. But I don't know how to install it. Is there a guide? That's up? Last time I checked Sony's site the guide was down.
Two qustions, how bad does the camera become, is it still usable for simple random snaps to send to friends on IMs?
What is DRM fix kernel?
TIA

Lol nougat barely works. I've been running it for days now. My opinion is nougat is excellent on z3c. I can upload a flash able zip with full Google apps if people are interested

mcgi5sr2 said:
Lol nougat barely works. I've been running it for days now. My opinion is nougat is excellent on z3c. I can upload a flash able zip with full Google apps if people are interested
Click to expand...
Click to collapse
If that was a reply to me, I was referring to the camera

tomascus said:
If that was a reply to me, I was referring to the camera
Click to expand...
Click to collapse
sorry pal.
camera isn't really use-able yet
everything else worked great

mcgi5sr2 said:
sorry pal.
camera isn't really use-able yet
everything else worked great
Click to expand...
Click to collapse
Which android security patch is it on?
Battery life good?

BrotherZero said:
Which android security patch is it on?
Battery life good?
Click to expand...
Click to collapse
I get a solid two days, and as a CoC player thats pretty dam good

mcgi5sr2 said:
I get a solid two days, and as a CoC player thats pretty dam good
Click to expand...
Click to collapse
That does sound good. Get 6-8h SOT with SLiMM ROM. Do you know how much you get on this one?
Also could you do me a favour and check which Android Security Patch it got? It would be awesome if PA is up to date with that.
TIA

BrotherZero said:
That does sound good. Get 6-8h SOT with SLiMM ROM. Do you know how much you get on this one?
Also could you do me a favour and check which Android Security Patch it got? It would be awesome if PA is up to date with that.
TIA
Click to expand...
Click to collapse
Security patch is September. Its built off the main branch of AOSP google sources. So security will always be uptodate

mcgi5sr2 said:
Security patch is September. Its built off the main branch of AOSP google sources. So security will always be uptodate
Click to expand...
Click to collapse
Thanks, mate! might give this a try then. Shame abut the camera, but I guess ill found out how unusable is. Hopefully there is a fix soon.

Sony fix the AOSP camera if they wanted to?
Enviado de meu D5833 usando Tapatalk

mcgi5sr2 said:
Security patch is September. Its built off the main branch of AOSP google sources. So security will always be uptodate
Click to expand...
Click to collapse
Please could provide a link to the Rom Nougat 7.0

Can you please share the gapps, or tell me which ones you are using? I got cm gapps or open gapps from cm website (for 7.0) and my google play services keep crashing.
Thanks,
mcgi5sr2 said:
Lol nougat barely works. I've been running it for days now. My opinion is nougat is excellent on z3c. I can upload a flash able zip with full Google apps if people are interested
Click to expand...
Click to collapse

https://www.androidfilehost.com/user/?w=settings-dev-files&flid=73595
Is where I am posting all the builds I put together. So be warned that if it doesn't boot it was just a test version. AFAIK the latest ROM should boot fine without issue. GApps are already installed on all the flashable zip versions in that location

mcgi5sr2 said:
https://www.androidfilehost.com/user/?w=settings-dev-files&flid=73595
Is where I am posting all the builds I put together. So be warned that if it doesn't boot it was just a test version. AFAIK the latest ROM should boot fine without issue. GApps are already installed on all the flashable zip versions in that location
Click to expand...
Click to collapse
Hey thanks. Quick question, you said you have been running nougat on your device and everything (but the camera) seems to be working. I just installed it last night (and my gapps are working as well now) and I already noticed a couple of bugs. First and most important, i can't hear the person on the other end of the line. It appears that my earpiece is not working. The person on the other end can hear me, but I can't hear that person. Second and minor issue, once i plug in my z3c to charge, the battery icon top right shows the charging sign as it should. However when i unplug, that charging sign doesn't go away. So far i have noticed these bugs, can you confirm if you are not facing these bugs (so I know its my device that is messed up).
Thanks,

flintfirewalker said:
Hey thanks. Quick question, you said you have been running nougat on your device and everything (but the camera) seems to be working. I just installed it last night (and my gapps are working as well now) and I already noticed a couple of bugs. First and most important, i can't hear the person on the other end of the line. It appears that my earpiece is not working. The person on the other end can hear me, but I can't hear that person. Second and minor issue, once i plug in my z3c to charge, the battery icon top right shows the charging sign as it should. However when i unplug, that charging sign doesn't go away. So far i have noticed these bugs, can you confirm if you are not facing these bugs (so I know its my device that is messed up).
Thanks,
Click to expand...
Click to collapse
Hi!
I'm using the latest AOSP for our devices, and facing thiese bugs too. ( 20160912 ). Sometimes I've got calling bug when I can't hear the other person on the line, but he can hear me. Just a restart solves it, but I've got thiese problem nearly evry tenth call time... And one more thing, while i'm on calling and my phone set to minimum volumes, everyone else could to hear my phones speak... or I can say it, what you're talking about. Like when i set the speak to a loudspeaker, as though it were the whole conversation. The speakers are very loud on minimum volume, and not too much louder on maximum settings. ( but, i think they are a known bug ).
Second, the cahrging icon. Yes I experienced it too, when you disconnect the charger from the phone, the icon remain the same, like when the charger plugged in.. And I think, something gping on the background, because my battery goes down nearly 30 percent by a night ( 8h ).
About the rom speed. I think, it runs very smooth / fine until more than five software parallel, ROM while fast. If more than five program run in the background, ROM start to tear, slow down. If you delete them from the memory, the system will be fast again.
I tried to take a logcat with "aLogcat" from playstore, but it's not working. I remember it from my previously phone age, i must convert it to system app... But now, I can't do this, because i did it with Titanium Backup, and now they not support andoid N..
Anyway, I think its will be a very good AOSP rom... ( without camera :/ )

No sound on video recording on Oxygen OS

Hi guys. As I said in the title, sometimes, i think 50% of the time, I have no sound when I record a video. This happens with stock camera app and with google camera app also.
I haven't been able to find what is the trigger regarding this, sometimes it works after restart, sometimes it doesn't, sometimes it works just after I restart the app. I have also tried to change the video resolution, the problem appears in any resolution.
I think this is an old problem, which appeared in an early version of OOS, but, since I have not used the phone for video recording for a long time, I did not knew that this problem exists.
I have tried to modify the "fluence" in build prop (noise reduction), hoping that it will work, after I have read a few threads regarding the problem with inconsistent sound on video recording. However, I did not find anyone who complained about no sound on video.
I am on open beta 15 rooted with magisk.
Any ideas?

I would try another Rom in your case.
Unleashed by ONEPLUS 3T rooted

RASTAVIPER said:
I would try another Rom in your case.
Unleashed by ONEPLUS 3T rooted
Click to expand...
Click to collapse
Yep, I am about to try another rom, 4.5.0 stable, to see if the problem still persists and afterwards some lineage os rom. Thank you.

neinfricatu said:
Yep, I am about to try another rom, 4.5.0 stable, to see if the problem still persists and afterwards some lineage os rom. Thank you.
Click to expand...
Click to collapse
Just hit the Thanks button buddy.
Unleashed by ONEPLUS 3T rooted