Database Develop

[RECOVERY][G800F]TWRP 3.0.0

im on a roll tonight haha,
next up for release is my custom build of TWRP 3.0.0 recovery this is the latest version of the highly popular TWRP custom recovery.
a
this recovery is fully working as far as i can tell except that it takes a short time to boot so be patient, once booted it is fine,
this recovery also has F2FS support to go with my new custom release
3 Ways to install now, odin image, standard flashable zip (should work from older TWRP) and a basic img file that can be flashed via terminal or TWRP
download links:
changelog
Code:
Fixed MTP
Fixed display brightness
thanks to hennymcc for the help and his device trees that i have modified a little
instructions for converting data to F2FS without losing data(hopefully)
requirements:
microsd card
1. boot into TWRP
2. select the backup options
3. choose your external microsd card using the choose storage button
4. make sure data is selected and start backup
5. once backup is complete, go to wipe and then advanced wipe, select data and click repair or change filesystem and then change file system
6. select f2fs and follow instructions until format is done,
7. restore the backup of data you just made
8. be sure to flash my DMPKern in odin before attempting to boot after f2fs conversion
any suggestions or comments feel free to ask and any donations however small would be greatly appreciated also
XDA:DevDB Information
TWRP3 For G800F, Tool/Utility for the Samsung Galaxy S5 Mini
Contributors
DJ_Steve
Version Information
Status: Beta
Current Beta Version: 1.1
Beta Release Date: 2016-02-14
Created 2016-02-12
Last Updated 2016-11-20

I'm trying to flash it via twrp 2.8.1.0 but without success
Gesendet von meinem SM-G800F mit Tapatalk

no_means_no said:
I'm trying to flash it via twrp 2.8.1.0 but without success
Gesendet von meinem SM-G800F mit Tapatalk
Click to expand...
Click to collapse
its not a zip you can flash its an odin tar.md5 thats been zipped - extract it then use odin to flash

DJ_Steve said:
its not a zip you can flash its an odin tar.md5 thats been zipped - extract it then use odin to flash
Click to expand...
Click to collapse
Excuse my stupidity. I just saw a zip file and thought I might flash it via twrp. now I flashed via odin with success. But the new twrp crashes on backup.

Hasnt crashed once on me what error did it show
Sent from my SM-G800F using Tapatalk

DJ_Steve said:
Hasnt crashed once on me what error did it show
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
sorry, no error. It just freezes pretty early, once at 5%, once at 2%

It would be great if we have it for the g800h as jackeagle build of twrp can't flash aroma zip :v

no_means_no said:
sorry, no error. It just freezes pretty early, once at 5%, once at 2%
Click to expand...
Click to collapse
I think i know why that is will fix and upload today
Sent from my AOSP on Grouper using Tapatalk

sasukesama said:
It would be great if we have it for the g800h as jackeagle build of twrp can't flash aroma zip :v
Click to expand...
Click to collapse
Would love to build for g800h ill have a looksie later
Sent from my AOSP on Grouper using Tapatalk

DJ_Steve said:
I think i know why that is will fix and upload today
Sent from my AOSP on Grouper using Tapatalk
Click to expand...
Click to collapse
good to hear that. just let me know whenever you reuploaded

Very buggy with me.. :/
Back to TWRP v2.8.7.0

Will the internal storage be formated as well or only the data partition (apps and their data only) ?

internal storage will format as its stored on /data aswell

DJ_Steve said:
I think i know why that is will fix and upload today
Sent from my AOSP on Grouper using Tapatalk
Click to expand...
Click to collapse
Did you already upload a new version after the first one freezing while doing backups?
Gesendet von meinem SM-G800F mit Tapatalk

no_means_no said:
good to hear that. just let me know whenever you reuploaded
Click to expand...
Click to collapse
just updated link in main page

I can't make a backup to internal storage or external SDcard.
Error: Failed to mount '/system' (Permission denied)

hmmm interesting ok ill look into that as im not sure why its failing that one

tapptapp said:
I can't make a backup to internal storage or external SDcard.
Error: Failed to mount '/system' (Permission denied)
Click to expand...
Click to collapse
I get the same error as well. At least this version of TWRP can SEE my 64 GB microSD. 2.8.7.0 couldn't see it.

I haven't tried this yet,but I certainly will at some point. I just wanted to say thanks for all your work on this device.It is really appreciated!

ive disabled to download for now until i fix the issue.

Adaway on Android N

Has anyone been able to get adaway to work on N with su2. 70? It loads, gets root, tries to copy host files.. Then says "host files cannot be copied".. Select target directory. What is the target directory for N?

I'm on su2.69 and it worked just fine

chapelfreak said:
I'm on su2.69 and it worked just fine
Click to expand...
Click to collapse
I flashed this to get on N.. http://forum.xda-developers.com/nexus-6/general/android-n-preview-npc56p-twrp-recovery-t3332599 is this what you used?

Same error here - with latest TWRP, SuperSU 2.70, and elementalX kernel 4.01... :/

There is a flashable zip for usage with systemless root in the adaway Thread, flash that one too and everything is fine.
Edit: this file https://www.androidfilehost.com/?fid=24438995911977059
Gesendet von meinem Nexus 6 mit Tapatalk

It needs Busybox for mine to work.

kwdan said:
I flashed this to get on N.. http://forum.xda-developers.com/nexus-6/general/android-n-preview-npc56p-twrp-recovery-t3332599 is this what you used?
Click to expand...
Click to collapse
I took the ota pushed to me from marshmallow.

Same thing here Adaway doesn't work.
I installed android N with the beta enrollment OTA.
I Used the SuperSU 2.70 AutoRoot, then install Adaway and then busybox; not working :/

bluetigger68 said:
There is a flashable zip for usage with systemless root in the adaway Thread, flash that one too and everything is fine.
Edit: this file https://www.androidfilehost.com/?fid=24438995911977059
Gesendet von meinem Nexus 6 mit Tapatalk
Click to expand...
Click to collapse
Thank you... Working perfectly now. I never knew how many ads were on this phone.

Dreadk said:
Same thing here Adaway doesn't work.
I installed android N with the beta enrollment OTA.
I Used the SuperSU 2.70 AutoRoot, then install Adaway and then busybox; not working :/
Click to expand...
Click to collapse
same steps here.
tried with the zip to prep the OS and still no work

Work around for ad blocking on Android Preview 5 (latest NPD90G)
#Windows PC download the following:
'SuperSU' ("UPDATE-SuperSU-v2.76-20160630161323.zip") https://download.chainfire.eu/969/SuperSU/
MoaAB_ADBlocking_06082016_R1.zip http://forum.xda-developers.com/showthread.php?t=1916098
TWRP 3.0.0-1 from https://dl.twrp.me/angler/
Install Android N 7.0 NPD90G on Nexus 6P
reboot into bootloader (Power Button and Vol Down)
fastboot flash recovery twrp-3.0.0-1-angler.img <------ Download from TWRP (3.0.2 seems to always get stuck on TWRP splash screen)
#Boot to recovery
#if TWRP asks for a password to decrypt you will need to format userdata (THIS WILL FACTORY RESET YOUR PHONE!!!)
#ONLY do the following if you can not get directly into TWRP and are asked for a decrypt password
Reboot into bootloader
fastboot format userdata
fastboot format cache
#boot into TWRP recovery
Manually add the files you downloaded via Windows PC to Nexus 6P while in TWRP (put them in the / or /sdcard/Download directory *or a directory of your choice)
#Windows PC unzip MoaAB_ADBlocking_06082016_R1.zip and go MoaAB_ADBlocking_06082016_R1 > system > etc >
# There should be 2 files here hosts, and hosts.defaults
TWRP > Advanced > Terminal
cat /system/etc/hosts
#note that stock only the following should be displayed.
127.0.0.1 localhost
::1 ip6-localhost
# The following will copy the hosts file you got from MoaAB zip to /system/etc
cp /sdcard/Download/hosts /system/etc/
^ This is the 'hosts' file you downloaded from MoaAB previously
cat /system/etc/hosts
#output should be rather large now...
Reboot phone and test ad blocking on apps 'speedtest' is a good app to test on... No ad after speedtest ad blocking is working....
#profit

bluetigger68 said:
There is a flashable zip for usage with systemless root in the adaway Thread, flash that one too and everything is fine.
Edit: this file https://www.androidfilehost.com/?fid=24438995911977059
Gesendet von meinem Nexus 6 mit Tapatalk
Click to expand...
Click to collapse
Yes it work! perfect!!!

kwdan said:
Has anyone been able to get adaway to work on N with su2. 70? It loads, gets root, tries to copy host files.. Then says "host files cannot be copied".. Select target directory. What is the target directory for N?
Click to expand...
Click to collapse
Flash this in Recovery, Reboot Handy, Start Adaway: https://www.androidfilehost.com/?fid=24438995911977059

To get Adaway working in Android N, All you need to do is...
1. Install the Adaway apk
2. Flash this zip in TWRP, https://www.androidfilehost.com/?fid=24438995911977059
And that's it!!!
Don't **** around with updating SuperSU, or installing busybox, or any other suggestions made here.
CLOSE THREAD!

pr0ndigy said:
To get Adaway working in Android N, All you need to do is...
1. Install the Adaway apk
2. Flash this zip in TWRP, https://www.androidfilehost.com/?fid=24438995911977059
And that's it!!!
Don't **** around with updating SuperSU, or installing busybox, or any other suggestions made here.
CLOSE THREAD!
Click to expand...
Click to collapse
No mirrors found for that file on filehost.. Can you provide an alternative location please?
Edit: Link eventually worked after refreshing the page a few times..

I'm Just bumping this up so I don't have to make a new thread. The latest update seems to have broken this. The hosts file gets replaced automatically on reboot. Anyone else have this problem?

You're just genius! Works perfectly on Nexus 5X (NBD90W) without even formatting userdata (twrp 3.0.2-2)

Found another way. Mount system r/w in terminal or use root explorer after that adaway should work normally till next reboot.

MHA-L29C636B172 perfect boot image

Hi guys
if anyone is interested in testing out this boot image i created for my c636b172
removes all encrypt, perfect mounting options for all partitions (this took a while to figure since some caused bootloops)
also reduced voltages for wifi module (may be unstable, if anyone has problems let me know i can try and adjust, otherwise if im not getting problems ill just keep decreasing it)
how to install
1. make sure twp is installed
2. in data/dalvik-cache delete arm and arm64 folders.
3. boot into twrp > wipe cache and dalvik
4. flash the boot image in twrp (flash image select image flash to boot)
5. if you had su installed, flash the zip again
6. go to wipe cache and dalvik again (just in case)
7. reboot and enjoy, theoretically should be slightly faster, and less overhead.
Download
https://www.dropbox.com/s/msda9a3smy9lqb4/modBootv2.img?dl=0
if anyone has a request for their specific boot image let me know and ill add the same values.

Thank you for your work. Is this only for C636 devices or would this work on any device.
Could your reassemble it to add features like DT2W (doubletap to wake)?

audioralf said:
Thank you for your work. Is this only for C636 devices or would this work on any device.
Could your reassemble it to add features like DT2W (doubletap to wake)?
Click to expand...
Click to collapse
i think DT2W is disabled, no flags of it in the boot image, you can try this guide.
https://forum.xda-developers.com/mate-9/how-to/enable-double-tap-to-wake-mate-9-t3580764
the boot image is for the c636, im not sure if you can flash it on another base you can try just have a stock boot.img handy
or to be safe you can send me your boot.img and ill edit it the same.

Thank you for your friendly offer!
I am back on C432B156 with supersu modified boot. The original boot img linked here
https://forum.xda-developers.com/mate-9/development/stock-boot-img-library-t3573312
Mine is https://mega.nz/#!EABCVJwb!wopFOGqJzbpIX6edxM5Y9IVeZAIJ_CAJYUn3q4cc074
I recognized that I have no adb access in TWRP 3.02.2
I can not mount my pc connection. Would this be fixed?
Gesendet von meinem MHA-L29 mit Tapatalk

audioralf said:
Thank you for your friendly offer!
I am back on C432B156 with supersu modified boot. The original boot img linked here
https://forum.xda-developers.com/mate-9/development/stock-boot-img-library-t3573312
Mine is https://mega.nz/#!EABCVJwb!wopFOGqJzbpIX6edxM5Y9IVeZAIJ_CAJYUn3q4cc074
I recognized that I have no adb access in TWRP 3.02.2
I can not mount my pc connection. Would this be fixed?
Gesendet von meinem MHA-L29 mit Tapatalk
Click to expand...
Click to collapse
no, twrp 3022 doesnt have MTP access right now.

Thank you for the info.
Which advantage is on daily usage. I guess I would have to install supersu again, for it modifies the boot.
My device: Mate 9 supersu b156 Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)

Mount does work in 3.1.0. Though you have to tap on "Mount USB Storage", then unmount before it actually mounts..

ante0 said:
Mount does work in 3.1.0. Though you have to tap on "Mount USB Storage", then unmount before it actually mounts..
Click to expand...
Click to collapse
ill try this
always thought it didnt work since it worked fine in 303

Hi Virtyx,
I very appreciate your work, good hope to use,
but i have some not understand the installation in STEP 2 (in data/dalvik-cache delete arm and arm64 folders) what to do?
Hope you can help explain more STEP 2 detail.
I have L29-C636b172 and unlocked Bootloader.
A lot of Thanks.

xjeepnsk said:
Hi Virtyx,
I very appreciate your work, good hope to use,
but i have some not understand the installation in STEP 2 (in data/dalvik-cache delete arm and arm64 folders) what to do?
Hope you can help explain more STEP 2 detail.
I have L29-C636b172 and unlocked Bootloader.
A lot of Thanks.
Click to expand...
Click to collapse
Using a file Explorer with root support, navigate to /data/dalvik-cache and remove those 2 folders. Alternatively use a terminal app and 'rm -rf /data/dalvik-cache/arm*'.
I guess you could use the file manager or terminal in twrp.

ante0 said:
Using a file Explorer with root support, navigate to /data/dalvik-cache and remove those 2 folders. Alternatively use a terminal app and 'rm -rf /data/dalvik-cache/arm*'.
I guess you could use the file manager or terminal in twrp.
Click to expand...
Click to collapse
Hi ante0,
I succeeded, Thank you so much

Hello sir,
My mate 9 stuck in boot loop....
And I can't access to recovery too
Can u make scatter file for mate 9 to fix boot loop

[ROM] fRomFuture - Genesis (B172) KangVip Mod

Welcome to Genesis
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Base B172
Busybox
prerootet with Magisk
Viper4Android
Callrecorder
Init.d support
light debloadet
Data usage in notification panel
Parentsmode
VoLTE (if you provider support it)
More clone apps
3D Panorama Camera Mod
And you can remove your FRP Lock! If you have FRP lock [emoji6]
Install from Stock:
Backup your Data
Unlock bootloader
install TWRP (Download)
Backup Stock with TWRP (System,Cust,Version,Product,Vendor)
Wipe System,Cust,Version,Product,Vendor in TWRP
Format Data Partition (type YES)
Copy files to your phone
install Rom
L29C432 User can reboot now
install Data Files for other brands
Reboot and have fun
Install from Custom Rom:
Backup your Data with TWRP
Wipe System,Cust,Version,Product,Vendor in TWRP
Wipe Data for a Clean Flash or try dirty
Copy Rom to your Phone
install Rom and KangVipMod (if you want)
L29C432 User can reboot now
install Data Files and reboot (other brands)
If you installed KangVip Mod at first boot a huawei app asked for root permission . Just grant for a full working rom!
DOWNLOAD B172
Datafiles L09C432
Datafiles L29C636
Datafiles L29C567
Datafiles AL00
KangVip Mod for B172:
Download
For emmc user :
DOWNLOAD B172
KangVip Mod for B172:
Download
Androidfilehost dont have a P10plus Folder yet. So its ok downloading this file
Credits to:
tecalote
tkkg1984
chainfire
guitardedhero
mankindtw
Disclaimer: I will not take any responsibility for anything wrong happen to your device. Do it at your own risk.
Join my Telegram Group for more info, testbuilds or just for fun:
https://t.me/joinchat/BpBgfQ1WyaKBrDxiEzUWjQ
​

Blackball said:
Welcome to Genesis
Base B150
prerootet with SuperSU 2.82
Busybox
Viper4Android
Callrecorder
Init.d support
light debloadet
This is the first build and i think i can add more features in the future.
Install:
Unlock bootloader
install TWRP (Download)
Backup Stock (System,Cust,Version,Product,Vendor)
Wipe System,Cust,Version,Product,Vendor
Format Data Partition (type YES)
Copy Rom to your Phone
install Rom
Reboot and have fun
Its testet with VKY-L29C432B133 and everything is working fine.
If there is any problems you can try to install oeminfo from B133. If that not work debrand to VKY-L29C432B133.
DOWNLOAD
MD577c83b8eccbf1f69d0ebb9daa6190bc1
Androidfilehost dont have a P10plus Folder yet. So its ok downloading this file
Credits to:
tecalote
tkkg1984
chainfire
guitardedhero
Disclaimer: I will not take any responsibility for anything wrong happen to your device. Do it at your own risk.
​
Click to expand...
Click to collapse
Hi,
I have P10 Plus L29C432B123, can I install firmware B150 over it with TWRP without loosing bootloader unlocking and without erasing data (I have already configurated my phone and installed a lot of apps, I wish to keep them...) ?
How I must proceed ?
Thanks for the attention.

The recovery have data partition encription?
For "wipe data" are required, without that probably brick the device...

@anabolic_guy
After install the bootloader is still open but you need to make a full wipe. So you lost all your data but you can make a Backup with the Huawei tool or titanium backup.
@BadWolfYe
The recovery don't have data encryption but its not needed if you patch the kernel. It will not brick your device.!
You can always back to stock with HWOTA method and then your data partition is stock again [emoji6]
Gesendet von meinem VKY-L29 mit Tapatalk

Blackball said:
@anabolic_guy
After install the bootloader is still open but you need to make a full wipe. So you lost all your data but you can make a Backup with the Huawei tool or titanium backup.
@BadWolfYe
The recovery don't have data encryption but its not needed if you patch the kernel. It will not brick your device.!
You can always back to stock with HWOTA method and then your data partition is stock again [emoji6]
Gesendet von meinem VKY-L29 mit Tapatalk
Click to expand...
Click to collapse
Does it work for VTR or could you make it work?

I'm sorry. I don't know. The only way is that you test it.
But I think there are some changes needed but kernel, system partition and twrp are compatible.
Gesendet von meinem VKY-L29 mit Tapatalk

Blackball said:
@anabolic_guy
After install the bootloader is still open but you need to make a full wipe. So you lost all your data but you can make a Backup with the Huawei tool or titanium backup.
@BadWolfYe
The recovery don't have data encryption but its not needed if you patch the kernel. It will not brick your device.!
You can always back to stock with HWOTA method and then your data partition is stock again [emoji6]
Gesendet von meinem VKY-L29 mit Tapatalk
Click to expand...
Click to collapse
Thanks a lot for the answer.

funiewski said:
Does it work for VTR or could you make it work?
Click to expand...
Click to collapse
Blackball said:
I'm sorry. I don't know. The only way is that you test it.
But I think there are some changes needed but kernel, system partition and twrp are compatible.
Click to expand...
Click to collapse
I'd be surprised if it didn't work on both the P10 & P10+. Apart from screen resolution and amount of RAM, both phones are pretty much identical and don't forget the KangVIP rom works on both (if you can get it running, lol!)
So unless @Blackball has seriously messed around with some system files then I think it will be ok, and as he says, you can always go back to stock
@Blackball : Interesting that you format data though, does the kernel have forceencrpytion disabled so we can use an unencyrpted data partition?

colthekid said:
I'd be surprised if it didn't work on both the P10 & P10+. Apart from screen resolution and amount of RAM, both phones are pretty much identical and don't forget the KangVIP rom works on both (if you can get it running, lol!)
So unless @Blackball has seriously messed around with some system files then I think it will be ok, and as he says, you can always go back to stock
@Blackball : Interesting that you format data though, does the kernel have forceencrpytion disabled so we can use an unencyrpted data partition?
Click to expand...
Click to collapse
I was going to test it anyway, but asking does not harm

I need the data partition for the Rom so I decided to format the data partition. And yes we can use the unencrypted now.
Gesendet von meinem VKY-L29 mit Tapatalk

Blackball said:
Welcome to Genesis
Base B150
prerootet with SuperSU 2.82
Busybox
Viper4Android
Callrecorder
Init.d support
light debloadet
This is the first build and i think i can add more features in the future.
Install:
Backup your Data
Unlock bootloader
install TWRP (Download)
Backup Stock (System,Cust,Version,Product,Vendor)
Wipe System,Cust,Version,Product,Vendor
Format Data Partition (type YES)
Copy Rom to your Phone
install Rom
Reboot and have fun
Its testet with VKY-L29C432B133 and everything is working fine.
If there is any problems you can try to install oeminfo from B133. If that not work debrand to VKY-L29C432B133.
DOWNLOAD
MD577c83b8eccbf1f69d0ebb9daa6190bc1
Androidfilehost dont have a P10plus Folder yet. So its ok downloading this file
Credits to:
tecalote
tkkg1984
chainfire
guitardedhero
Disclaimer: I will not take any responsibility for anything wrong happen to your device. Do it at your own risk.
​
Click to expand...
Click to collapse
Hi,
I followed all your instructions but, when I connect the device with usb debug active, the phone doesn't ask me the permission to validate the pc access with the confirmation dialog, so I cannot connect properly.
I also, in developer menu, I clicked on restore the standard settings and this disactivated also the unlock vendor...
Please help me.
Thanks
Cesare.

Hi, pressing on restore standard is not a good idea. I will check how you can get it back.
With PC access do you mean adb?
Gesendet von meinem VKY-L29 mit Tapatalk

Blackball said:
Hi, pressing on restore standard is not a good idea. I will check how you can get it back.
With PC access do you mean adb?
Gesendet von meinem VKY-L29 mit Tapatalk
Click to expand...
Click to collapse
Yeah, adb and hisuite
In addition of this I cant' find neither in developer menu the option: Revoke USB debugging authorization
This appears when I run adb:
C:\adb>adb devices
List of devices attached
BHY7N17322002196 unauthorized
C:\adb>adb reboot fastboot
error: device unauthorized.
This adbd's $ADB_VENDOR_KEYS is not set; try 'adb kill-server' if that seems wrong.
Otherwise check for a confirmation dialog on your device.
But dialog confirmation never appears....

anabolic_guy said:
Yeah, adb and hisuite
In addition of this I cant' find neither in developer menu the option: Revoke USB debugging authorization
This appears when I run adb:
C:\adb>adb devices
List of devices attached
BHY7N17322002196 unauthorized
C:\adb>adb reboot fastboot
error: device unauthorized.
This adbd's $ADB_VENDOR_KEYS is not set; try 'adb kill-server' if that seems wrong.
Otherwise check for a confirmation dialog on your device.
But dialog confirmation never appears....
Click to expand...
Click to collapse
I have flashed the original rom and I have avaiable again (not grayed) the swith to enable oem unlocking, but when I enable it, immediately it returns at the original position (disable).
I don't understand why...
I am desperate...

How did you install the original rom?
Gesendet von meinem VKY-L29 mit Tapatalk

Blackball said:
How did you install the original rom?
Gesendet von meinem VKY-L29 mit Tapatalk
Click to expand...
Click to collapse
With HWOTA_VKY

So when you have now original recovery try to install from firmware finder. Another user had the same problem and fix it.
Gesendet von meinem VKY-L29 mit Tapatalk

Blackball said:
So when you have now original recovery try to install from firmware finder. Another user had the same problem and fix it.
Gesendet von meinem VKY-L29 mit Tapatalk
Click to expand...
Click to collapse
Hi, I have restored the phone and installed again your rom (oem unlock, bootloader unlock): the real probelm is that once installed when I try to connect the device with usb debug active, the phone doesn't ask me the permission to validate the pc access with the confirmation authorization fingerprint dialog, so I cannot connect properly, adb see the phone as unauthorized.
Either the "Revoke USB debugging authorization" menu is disappeared...
Please check carefully.

I will check that and i sent you a pm

Blackball said:
I will check that and i sent you a pm
Click to expand...
Click to collapse
Answered, take a look at ADB message

TWRP 3.2.3-0 for Moto Z2 Play [albus]

TWRP 3.2.3-0 for Moto Z2 Play (albus) ​
Latest TWRP changelog :
3.2.3-0 full changelog
Working/Bugs :
I have just basically tested and all seems to be working (including decryption of /data and mount External SDCard).
Installation Guide :
Make sure you have unlocked bootloader.
Reboot to bootloader and install.
Use command: fastboot flash recovery twrp-3.2.3-0-albus.img to install.
Download Link :
twrp-3.2.3-0-albus.img
How to use TWRP for first time:
1- Unlock Bootloader (search in Google how to do);
2- Flash TWRP via CMD and reboot recovery;
3- Boot in TWRP and allow permission to modify system (internal storage don't be accessible);
4- Go to Wipe > Format Data > type YES and swipe (you will see an error formatting data);
5- Back to TWRP Menu, go to Reboot and Recovery;
6- In TWRP, go to Wipe > Format Data > type YES and swipe again (TWRP will decrypt internal storage);
7- Reboot to TWRP one more time and internal storage will be accessible;
8- DONE!!!
How to Root Stock Oreo:
1- Boot in TWRP;
2- Go to Backup > mark Boot and System partition > Swipe to backup (don't needed system_image);
3- After this, go to Restore > select Boot and System > Swipe to restore;
4- After finished, install zip Magisk (17.1 or 17.3);
5- Reboot and DONE!!!
You don't need flash F2FS zip and too don't need any command in the terminal.
You don't need to do anything else!
Click to expand...
Click to collapse
Credits :
@Junior Passos
Thanks so much to @Dees_Troy, @Santhosh M and @vache.
:highfive:

Thanks for this Junior. I've installed it and works. Over wrote the previous ver so didn't have to format data. Finally able to make a backup straight to the sdcard.

Thanks,i had temporarily boot TWRP 3.2.0.I'm now able to mount internal and external sd-card.New TWRP successfully decrypt my data partition.I have installed magisk and it works now.Many many thank

I cannot backup any partition on micro sd card, it's only saying "updating partition details..."

Borchuck said:
I cannot backup any partition on micro sd card, it's only saying "updating partition details..."
Click to expand...
Click to collapse
SD Card in TWRP works without no problem.

i try to boot & try to flash in xt1710-06 but just say
fastboot boot twrp-3.2.0-0-albus.img
downloading 'boot.img' ...
and the device just get freeze... i need to press all buttons to restart....
and i try with twrp_3.1.1-0_albus.img
and is not possible get in twrp

Junior Passos said:
SD Card in TWRP works without no problem.
Click to expand...
Click to collapse
For me it shows nothing under the "Progress:" and I've tried two different sd cards.

Borchuck said:
For me it shows nothing under the "Progress:" and I've tried two different sd cards.
Click to expand...
Click to collapse
Hi,
Have you flashed TWRP or temporarily boot into TWRP ?
I have temporarily boot into TWRP,and the Backup stucks too
Gesendet von meinem Moto Z2 Play mit Tapatalk

Archerous said:
Hi,
Have you flashed TWRP or temporarily boot into TWRP ?
I have temporarily boot into TWRP,and the Backup stucks too
Gesendet von meinem Moto Z2 Play mit Tapatalk
Click to expand...
Click to collapse
Yes, I have temporarily boot. Are you suggesting I should flash it? Anyway, thanks for help!

Borchuck said:
Yes, I have temporarily boot. Are you suggesting I should flash it? Anyway, thanks for help!
Click to expand...
Click to collapse
Dont flash it,if you not have the original recovery.img.Without original recovery,you cant update your phone via OTA
Gesendet von meinem Moto Z2 Play mit Tapatalk

Archerous said:
Dont flash it,if you not have the original recovery.img.Without original recovery,you cant update your phone via OTA
Gesendet von meinem Moto Z2 Play mit Tapatalk
Click to expand...
Click to collapse
Well, in fact, first what I've done after purchasing the phone was disable Updater.apk and unlocked bootloader -I don't care about OTA. I only want to know is this TWRP working well and could be used as a daily driver. If yes I would gladly flash it. All in all I could make recovery backup, right?

Borchuck said:
Well, in fact, first what I've done after purchasing the phone was disable Updater.apk and unlocked bootloader -I don't care about OTA. I only want to know is this TWRP working well and could be used as a daily driver. If yes I would gladly flash it. All in all I could make recovery backup, right?
Click to expand...
Click to collapse
Ok,then you can flash it.Or ask the OP with a pn
Gesendet von meinem Moto Z2 Play mit Tapatalk

Archerous said:
Ok,then you can flash it.Or ask the OP with a pn
Gesendet von meinem Moto Z2 Play mit Tapatalk
Click to expand...
Click to collapse
I've flashed it and it work absolutely great! Thank you so much.
One more question: can you tell me what is "System image" backup? I thought I have full system partition backup when I choose just "System" and "Data" if I want to store my settings and apps...

Borchuck said:
I've flashed it and it work absolutely great! Thank you so much.
One more question: can you tell me what is "System image" backup? I thought I have full system partition backup when I choose just "System" and "Data" if I want to store my settings and apps...
Click to expand...
Click to collapse
You don't have to backup the system image since stock images are available.
Please keep in mind that TWRP does not backup the extremely important /data/media folder. See also https://twrp.me/faq/backupexclusions.html. So I usually do the following: Via TWRP's terminal I move media to media2 and then backup the data partition. When the backup is finished I move media2 back to media (you also have to do that when you restore your backup obviously).

Borchuck said:
Yes, I have temporarily boot. Are you suggesting I should flash it? Anyway, thanks for help!
Click to expand...
Click to collapse
Temporary boot don't have successfull permissions to create system backup. For this, use permanent flash.

bear263 said:
Thanks for this Junior. I've installed it and works. Over wrote the previous ver so didn't have to format data. Finally able to make a backup straight to the sdcard.
Click to expand...
Click to collapse
Borchuck said:
I've flashed it and it work absolutely great! Thank you so much.
One more question: can you tell me what is "System image" backup? I thought I have full system partition backup when I choose just "System" and "Data" if I want to store my settings and apps...
Click to expand...
Click to collapse
I have the alternate TWRP installed.
Can I just flash this in fastboot and overwrite the other with no other steps needed?

pizza_pablo said:
I have the alternate TWRP installed.
Can I just flash this in fastboot and overwrite the other with no other steps needed?
Click to expand...
Click to collapse
Yes, it should overwrite previous one.

Borchuck said:
Yes, it should overwrite previous one.
Click to expand...
Click to collapse
Great, so I won't have to wipe anything, just carry on with a new version of TWRP?

pizza_pablo said:
Great, so I won't have to wipe anything, just carry on with a new version of TWRP?
Click to expand...
Click to collapse
If you've wiped in previous version then it's already done. You can start using this.

Borchuck said:
If you've wiped in previous version then it's already done. You can start using this.
Click to expand...
Click to collapse
Piece of mind is priceless!
Thanks, again!