Database Develop

Phone Semi-bricked

Hello all!
So recently I was playing around with my G4, and decided to see if i could boot into fastboot mode. Turned out I could: theandroidsoul.com/lg-g3-fastboot-mode-61660/, but it would remove download mode in the process. It was totally useless. I couldn't run any commands and so I decided to put download mode back. I rebooted my phone, a notification caught my eye, and I completely forgot to put it back.
Fast forward a couple days, and my phone starts to run at 2 miles per hour. So, I factory reset, losing root and recovery in the process. That still didn't fix it, and now the camera, all speakers, and microphone don't work. Now, I can't replace download mode without root, so I cant run the LG Flash Tool. I'm starting to lose my mind over this. Please help!

Can your phone boot to android at all? if yes, then this might help put TWRP back on the phone WITHOUT ROOT. http://forum.xda-developers.com/tmobile-g4/development/tool-one-click-twrp-root-t3172936 thank micromod for making it possible.

MrSteelX said:
Can your phone boot to android at all? if yes, then this might help put TWRP back on the phone WITHOUT ROOT. http://forum.xda-developers.com/tmobile-g4/development/tool-one-click-twrp-root-t3172936 thank micromod for making it possible.
Click to expand...
Click to collapse
I can, but that unfortunately requires download mode, which I removed(oops).

jlynch630 said:
I can, but that unfortunately requires download mode, which I removed(oops).
Click to expand...
Click to collapse
Factory reset should have kept twrp recovery on the phone. With phone off, hold vol down and power together, when you see lg logo just release power button the hold it down again stioll holding vol down. say yes to the next 2 screens and it should boot into recovery.

MrSteelX said:
Factory reset should have kept twrp recovery on the phone. With phone off, hold vol down and power together, when you see lg logo just release power button the hold it down again stioll holding vol down. say yes to the next 2 screens and it should boot into recovery.
Click to expand...
Click to collapse
Hmm... I must have done something then, because it isn't there anymore. It just boots to the android logo and resets my phone.

jlynch630 said:
Hmm... I must have done something then, because it isn't there anymore. It just boots to the android logo and resets my phone.
Click to expand...
Click to collapse
Your only hope is to get fastboot to work then or lg service center

MrSteelX said:
Your only hope is to get fastboot to work then or lg service center
Click to expand...
Click to collapse
Heres what fastboot says:
Code:
[COLOR="Red"]FASTBOOT MODE[/COLOR]
PRODUCT NAME - msm9992_p1_tmo_us
VARIANT - msm9992_p1_tmo_us Toshiba 32GB
HW VERSION - rev-10
BOOTLOADER VERSION - N/A
BASEBAND VERSION - N/A
CARRIER INFO - N/A
SERIAL NUMBER - LGH811********
SIGNING - Production
SECURE_BOOT - disabled
LOCK_STATE - locked
[1280]
[1280] Fastboot mode started
[2780]
I think the lockstate may be why it doesn't work. Any clues to disable it?

jlynch630 said:
Heres what fastboot says:
Code:
[COLOR="Red"]FASTBOOT MODE[/COLOR]
PRODUCT NAME - msm9992_p1_tmo_us
VARIANT - msm9992_p1_tmo_us Toshiba 32GB
HW VERSION - rev-10
BOOTLOADER VERSION - N/A
BASEBAND VERSION - N/A
CARRIER INFO - N/A
SERIAL NUMBER - LGH811********
SIGNING - Production
SECURE_BOOT - disabled
LOCK_STATE - locked
[1280]
[1280] Fastboot mode started
[2780]
I think the lockstate may be why it doesn't work. Any clues to disable it?
Click to expand...
Click to collapse
Have twrp on internal storage then run
fastboot flash recovery twrp.img pray it flashes twrp and go from there.

MrSteelX said:
Have twrp on internal storage then run
fastboot flash recovery twrp.img pray it flashes twrp and go from there.
Click to expand...
Click to collapse
Ohh!! So close! It finishes writing, but then says : Failed(remote: Unknown Command)

jlynch630 said:
Ohh!! So close! It finishes writing, but then says : Failed(remote: Unknown Command)
Click to expand...
Click to collapse
in android, do u have the oem lock checked
also make sure that twrp is named twrp.img

MrSteelX said:
in android, do u have the oem lock checked
also make sure that twrp is named twrp.img
Click to expand...
Click to collapse
I didn't, but I enabled it and tried again, and it still didn't work.

try updating adb from the latest SDK. Also check to make sure your twrp download in not corrupted. then try again.

MrSteelX said:
try updating adb from the latest SDK. Also check to make sure your twrp download in not corrupted. then try again.
Click to expand...
Click to collapse
Updated adb(& fastboot) to no avail
Code:
C:\Users\21JohnL\adb>fastboot oem unlock
...
FAILED (remote: unknown command)
finished. total time: 0.016s
C:\Users\21JohnL\adb>fastboot flash recovery twrp-2.8.7.0-h811.img
target reported max download size of 536870912 bytes
sending 'recovery' (32968 KB)...
OKAY [ 0.719s]
writing 'recovery'...
FAILED (remote: unknown command)
finished. total time: 0.750s

jlynch630 said:
Updated adb(& fastboot) to no avail
Code:
C:\Users\21JohnL\adb>fastboot oem unlock
...
FAILED (remote: unknown command)
finished. total time: 0.016s
C:\Users\21JohnL\adb>fastboot flash recovery twrp-2.8.7.0-h811.img
target reported max download size of 536870912 bytes
sending 'recovery' (32968 KB)...
OKAY [ 0.719s]
writing 'recovery'...
FAILED (remote: unknown command)
finished. total time: 0.750s
Click to expand...
Click to collapse
Did you make a backup of laf?

Yes, why?
EDIT: Haha! Factory reset got me again! I'll make a comment on that page and see if someone has a copy stored
EDIT 2: I found one for the G3, will that work?

jlynch630 said:
Yes, why?
EDIT: Haha! Factory reset got me again! I'll make a comment on that page and see if someone has a copy stored
EDIT 2: I found one for the G3, will that work?
Click to expand...
Click to collapse
https://www.mediafire.com/?4a8bivbgk4s1d7q this is laf from 10n. flash this in fastboot should put download mode back for you.

MrSteelX said:
https://www.mediafire.com/?4a8bivbgk4s1d7q this is laf from 10n. flash this in fastboot should put download mode back for you.
Click to expand...
Click to collapse
Which partition?
Edit:
Still get error
Code:
C:\Users\21JohnL\Downloads>fastboot flash laf "laf (1).img"
target reported max download size of 536870912 bytes
sending 'laf' (36864 KB)...
OKAY [ 0.821s]
writing 'laf'...
FAILED (remote: unknown command)
finished. total time: 0.844s

jlynch630 said:
Which partition?
Click to expand...
Click to collapse
I am not sure at this time. Still goggling the problem.
edit 1.fastboot flash laf laf.img try this.
edit 2. fastboot erase laf.img
fastboot flash laf laf.img
---------- Post added at 08:37 PM ---------- Previous post was at 08:25 PM ----------
jlynch630 said:
Which partition?
Edit:
Still get error
Code:
C:\Users\21JohnL\Downloads>fastboot flash laf "laf (1).img"
target reported max download size of 536870912 bytes
sending 'laf' (36864 KB)...
OKAY [ 0.821s]
writing 'laf'...
FAILED (remote: unknown command)
finished. total time: 0.844s
Click to expand...
Click to collapse
fastboot erase laf.img
fastboot flash laf laf.img
try that.

MrSteelX said:
I am not sure at this time. Still goggling the problem.
edit 1.fastboot flash laf laf.img try this.
edit 2. fastboot erase laf.img
fastboot flash laf laf.img
---------- Post added at 08:37 PM ---------- Previous post was at 08:25 PM ----------
fastboot erase laf.img
fastboot flash laf laf.img
try that.
Click to expand...
Click to collapse
Both return:
Code:
FAILED: (remote:unknown command)
I think something is blocking fastboot commands from running

jlynch630 said:
Both return:
Code:
FAILED: (remote:unknown command)
I think something is blocking fastboot commands from running
Click to expand...
Click to collapse
At this time, I am unable to help you out. You should get into contact with Jcase or Autoprime. They know a lot more about this and may be able to help fix this laf.
fastboot erase laf

Error mode, really hard bricked

I tried to force update to b170, resored the backup from howtoroot thread and flashed stock recovery from within twrp, rebooted and my devicve is stuck on
ERROR MODE
err no11 recovery image
errror no 2 load failed
doesnt boot to fastboot, cant be seen by pc
cant even turn it off... it is infinite loop if i hold power button it boots "huawei logo for 1 second and again error mode"
Please help me to recover my device :/

Oh damn.. i recovered it basially i waited until batery died and then it got into fastboot mode, i unlocked bootloader, flashed twrp, restored b164 to b170 backup, and now im waiting until i download full update to b170 to finish the process, after that device will be 100% perfect

aciupapa said:
Oh damn.. i recovered it basially i waited until batery died and then it got into fastboot mode, i unlocked bootloader, flashed twrp, restored b164 to b170 backup, and now im waiting until i download full update to b170 to finish the process, after that device will be 100% perfect
Click to expand...
Click to collapse
How to boot into TWRP when after flashing it reboot infinitely on error mode and can't shutdown it.
Pressing VolumeUp for eRecovery go to error mode

aciupapa said:
Oh damn.. i recovered it basially i waited until batery died and then it got into fastboot mode, i unlocked bootloader, flashed twrp, restored b164 to b170 backup, and now im waiting until i download full update to b170 to finish the process, after that device will be 100% perfect
Click to expand...
Click to collapse
HI man I have the some problem error mode screen but in oreo update p8 lite 2017 any solution plz

p181153 said:
How to boot into TWRP when after flashing it reboot infinitely on error mode and can't shutdown it.
Pressing VolumeUp for eRecovery go to error mode
Click to expand...
Click to collapse
If you solved your problem tell me plz plz plz

jalel25 said:
If you solved your problem tell me plz plz plz
Click to expand...
Click to collapse
nope, this community do not help at all, my phone is dead even if a solution exist but nobody will tell me. I made 2 threads about it and they all go off topic and don't respond when I tell them. It's a very bad community

p181153 said:
nope, this community do not help at all, my phone is dead even if a solution exist but nobody will tell me. I made 2 threads about it and they all go off topic and don't respond when I tell them. It's a very bad community
Click to expand...
Click to collapse
I hope one of them help me ?

jalel25 said:
I hope one of them help me
Click to expand...
Click to collapse
Wait for moment when battery is at 0% and phone will shut down. Boot into fastboot and flash TWRP recovery, create backup, wipe all on device and reboot it.

mijanto313 said:
Wait for moment when battery is at 0% and phone will shut down. Boot into fastboot and flash TWRP recovery, create backup, wipe all on device and reboot it.
Click to expand...
Click to collapse
I tried that. My phone has been in this state for probably a month already. I heard the only solution is DC Phoenix via testpoint method.

Try Firmware finder for huawei + erecovery method , which is :
- download firmware finder on *another android phone* and search for exact phone model (ex : PRA-LA1C185)
- choose the very first firmware down the list
- Get an update thorugh dns >> Manually >> Register update
- After that , reboot your bricked phone into erecovery by ( power + volume*+*)
- press download recovery and last firmware
- wait till getting package
- by now should firmware start downloading
- let phone complete it's work and reboot
Hope that's work for you ?

p181153 said:
nope, this community do not help at all, my phone is dead even if a solution exist but nobody will tell me. I made 2 threads about it and they all go off topic and don't respond when I tell them. It's a very bad community
Click to expand...
Click to collapse
About your problem - If your phone throws errors when you try to boot into TWRP, then something is wrong with TWRP (for example you flashed incompatibile version). Boot into bootloader aka fastboot mode and try to flash TWRP again from there.
Off-topic part: In my opinion, this is the most helpful & best community about Android phones. Noone is going to help you if you keep spamming. Just be patient, we are humans, not robots

Botar230 said:
About your problem - If your phone throws errors when you try to boot into TWRP, then something is wrong with TWRP (for example you flashed incompatibile version). Boot into bootloader aka fastboot mode and try to flash TWRP again from there.
Off-topic part: In my opinion, this is the most helpful & best community about Android phones. Noone is going to help you if you keep spamming. Just be patient, we are humans, not robots
Click to expand...
Click to collapse
Hi,i bricked yesterday but today I installed the wrong TWRP as you said and I do not have access to anything .. Do you have a solution? Some say the bootloader is locked..
thank's !

Freysheur said:
Hi,i bricked yesterday but today I installed the wrong TWRP as you said and I do not have access to anything .. Do you have a solution? Some say the bootloader is locked..
thank's !
Click to expand...
Click to collapse
Bootloader can't be locked if you managed to flash TWRP. Do the following:
1. Make sure the phone is turned off
2. Hold Vol- and plug the usb cable in
3. You should be in bootloader aka fastboot mode
4. Flash TWRP using (p8 lite 2015) fastboot flash recovery <path>.img
5. fastboot reboot

Botar230 said:
Bootloader can't be locked if you managed to flash TWRP. Do the following:
1. Make sure the phone is turned off
2. Hold Vol- and plug the usb cable in
3. You should be in bootloader aka fastboot mode
4. Flash TWRP using (p8 lite 2015) fastboot flash recovery <path>.img
5. fastboot reboot
Click to expand...
Click to collapse
Hi bro', i love you :silly: I did not know the technic for enter in fastboot without volume "-" .
Okay, the bootloader and FRP is unlocked but before i'am on Nougat and i have passed on Oreo. For flashed the TWRP my commands are " fastboot flash recovery_ramdisk recovery.img ".
And i have a error message when i flash the ROM Stock or TWRP with the normal commands as " fastboot flash recovery recovery.img ".
My error message it's :
fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (11204 KB)...
OKAY [ 0.290s]
writing 'recovery'...
FAILED (remote: partition length get error)
finished. total time: 0.305s
Thank's for your reponse, sorry for my english, i'm french !

Freysheur said:
Hi bro', i love you :silly: I did not know the technic for enter in fastboot without volume "-" .
Okay, the bootloader and FRP is unlocked but before i'am on Nougat and i have passed on Oreo. For flashed the TWRP my commands are " fastboot flash recovery_ramdisk recovery.img ".
And i have a error message when i flash the ROM Stock or TWRP with the normal commands as " fastboot flash recovery recovery.img ".
My error message it's :
fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (11204 KB)...
OKAY [ 0.290s]
writing 'recovery'...
FAILED (remote: partition length get error)
finished. total time: 0.305s
Thank's for your reponse, sorry for my english, i'm french !
Click to expand...
Click to collapse
Use fastboot flash recovery only on 2015 variant. You need to use recovery ramdisk on 2017 variant
Sent from my LG-K220 using XDA Labs

Botar230 said:
Use fastboot flash recovery only on 2015 variant. You need to use recovery ramdisk on 2017 variant
Sent from my LG-K220 using XDA Labs
Click to expand...
Click to collapse
Why before i used the flash recovery and it worked ?
Do you have an answer to the error " FAILED (remote: partition length get error) " ?
---------- Post added at 11:25 AM ---------- Previous post was at 10:40 AM ----------
Ok, i try install ROM via TWRP..
I have no errors but i bootloop again.. and he puts me in the menu Huawei eRecovery..
---------- Post added at 11:39 AM ---------- Previous post was at 11:25 AM ----------
I try install ROM via Fastboot CMD.
C:\Users\Alban\Desktop\fastboots>fastboot erase cache
erasing 'cache'...
FAILED (remote: Command not allowed)
finished. total time: 0.011s
C:\Users\Alban\Desktop\fastboots>fastboot flash boot BOOT.img
target reported max download size of 471859200 bytes
sending 'boot' (15524 KB)...
OKAY [ 0.389s]
writing 'boot'...
FAILED (remote: partition length get error)
finished. total time: 0.413s

Hmmmm, i installed MorfuZ rom, he boot but he restart alone..
So I do not have a rom ...

jalel25 said:
I hope one of them help me
Click to expand...
Click to collapse
Everyone, I made a guide on my website to unbrick the device.
Here is the link:
http://mrviking.simplesite.com/440246066

Request OEM unlock Huawei P10

Hi all,
I have an incorrect firmware installed for my P10 and lots of things are not working (oreo 8.0). I want to re-flash or rollback to other firmwares but problem is I can't get into TWRP anymore. flashing it doesn't work and although I see in fastboot Phone Unlocked and FRP unlock i have the idea it has to do with the OEM unlock not working properly. It's also not available in the developer options. What;s exactly the link to huawei's page where you can request your phone unlock ID ?
Thanks

Whats not working ?
What is it saying when flashing something through fastboot ?

virusdunil said:
Whats not working ?
What is it saying when flashing something through fastboot ?
Click to expand...
Click to collapse
When I go into the bootloader and want to flash TWRP I get following message:
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (16494 KB)...
OKAY [ 0.552s]
writing 'recovery_ramdisk'...
FAILED (remote: Command not allowed)
finished. total time: 0.566s

What is the ADB command youre using ?

virusdunil said:
What is the ADB command youre using ?
Click to expand...
Click to collapse
fastboot flash recovery_ramdisk twrporeo.img
and my twrp oreo name is twrporeo.img

Thats why its not working...
TRY....... fastboot flash ramdisk twrporeo.img

virusdunil said:
Thats why its not working...
TRY....... fastboot flash ramdisk twrporeo.img
Click to expand...
Click to collapse
Same problem...:
C:\Android>fastboot flash ramdisk twrporeo.img
target reported max download size of 471859200 bytes
sending 'ramdisk' (16494 KB)...
OKAY [ 0.532s]
writing 'ramdisk'...
FAILED (remote: Command not allowed)
finished. total time: 0.546s

i did a mistake...its really recovery_ramdisk
Look Here...
TWRP

virusdunil said:
i did a mistake...its really recovery_ramdisk
Look Here...
TWRP
Click to expand...
Click to collapse
I already tried that but no success. Did a factory reset and now the bootloader is locked again. How can I unlock the bootloader again?
Thanks

1-is your phone working now ?
for bootloader unlock,do what you did first time... fastboot oem unlock yourcode123
how did you get the last update ?....firmware finder ?

virusdunil said:
1-is your phone working now ?
for bootloader unlock,do what you did first time... fastboot oem unlock yourcode123
how did you get the last update ?....firmware finder ?
Click to expand...
Click to collapse
First of all, I've tried to update from Nougat to Orea via Blackballs method in this thread https://forum.xda-developers.com/p10-plus/development/oreo-update-thread-l29c432-t3729907 with the firmware mentioned there
What is not working:
I've managed to do the first part (oreo install), but:
- SImcard has 'No service
- Can't flash TWRP
- Bootloader / phone locked in Fastboot
- I can't remember how I unlocked the P10 last year (I have a P10 L09-VTR, rebranded to L29-VTR and now 'working' on a VKY P10 plus rom)

I cant flash the recovery in my honor 4x

hello to all, accidentally delete the recovery of my smartphone and I have not been able to flash it using adb commands in Windows 10 therefore I can not restore the smartphone to the factory mode. please help

What error it gives when you type command 'fastboot flash recovery <recovery_file>'?
How did you deleted the recovery?
Also the end ("I can not restore the computer from the factory") doesn't make any sense.

keikari said:
What error it gives when you type command 'fastboot flash recovery <recovery_file>'?
How did you deleted the recovery?
Also the end ("I can not restore the computer from the factory") doesn't make any sense.
Click to expand...
Click to collapse
1. I think I deleted the recovery when I rooted the smartphone with kingroot.
2. the error that gives me is the following:
" S C:\adb> fastboot flash recovery recovery.img
target reported max download size of 524288000 bytes
sending 'recovery' (9304 KB)...
OKAY [ 0.222s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.234s ".

crhistiandavidbonilla47 said:
1. I think I deleted the recovery when I rooted the smartphone with kingroot.
2. the error that gives me is the following:
" S C:\adb> fastboot flash recovery recovery.img
target reported max download size of 524288000 bytes
sending 'recovery' (9304 KB)...
OKAY [ 0.222s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.234s ".
Click to expand...
Click to collapse
Can you still boot normally and do you have root access?
---------- Post added at 08:33 PM ---------- Previous post was at 08:29 PM ----------
Also try to re-unlock bootloader and if it doesn't work, re-lock and then unlock again. So we can be sure you don't have problems with that, because possible fix would otherwise make your phone worse.

keikari said:
Can you still boot normally and do you have root access?
---------- Post added at 08:33 PM ---------- Previous post was at 08:29 PM ----------
Also try to re-unlock bootloader and if it doesn't work, re-lock and then unlock again. So we can be sure you don't have problems with that, because possible fix would otherwise make your phone worse.
Click to expand...
Click to collapse
yes i can still boot normally, i erase kingroot so i think that i dont have root access

crhistiandavidbonilla47 said:
yes i can still boot normally, i erase kingroot so i think that i dont have root access
Click to expand...
Click to collapse
Well then your best choice is probably to try to re-install firmware and hope this does something. Do it with dload and force update method, because it doesn't use default recovery.
Or if you happen to have root access you can try this https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en or similiar app to flash recovery while device running. (Or 'dd' command)

keikari said:
Well then your best choice is probably to try to re-install firmware and hope this does something. Do it with dload and force update method, because it doesn't use default recovery.
Or if you happen to have root access you can try this https://play.google.com/store/apps/details?id=com.cgollner.flashify&hl=en or similiar app to flash recovery while device running. (Or 'dd' command)
Click to expand...
Click to collapse
Nothing works

I had a similar problem: in fastboot I can install twrp successfully, but when I reboot, boot always to the stock emui recovery...
I don't know why.
I thought it was already installed twrp, I don't know why now boots to the stock one...
Does anyone can help me? Thanks.

Can't flash vendor.img but i have TWRP [What to do ?]

Hi guys , i was running AOSIP PIE rooted and bootloader unlocked. I did an update of Magisk. And then i couldn't flash twrp it was not working , i could still boot phone normally and phone run smooth. Someone told me to flash TWRP with flashify and i did. Here the problems started , i started having error , can't boot anywhere etc...
I followed this tutorial https://forum.xda-developers.com/hua...g-to-t3932203/ for last solution .
But unfortunatly i can't flash VENDOR.img in fastboot , i can flash all except VENDOR.img it says
C:\ADB>fastboot flash vendor VENDOR.img
target reported max download size of 471859200 bytes
sending sparse 'vendor' 1/2 (460796 KB)...
OKAY [ 10.697s]
writing 'vendor' 1/2...
FAILED (remote: Command not allowed)
finished. total time: 10.711s
I have flashed with success TWRP twrp-3.3.1-0-charlotte , i can get to it but there is no files inside the phone and it's not supporting SD cards to i don't have any ROM to flash ...
Do you guys have any idea about what to do ?
Thank you very much

I need help :'(

I had that.
Phone was completely dead, needed a new board.

chrissyyyw said:
I had that.
Phone was completely dead, needed a new board.
Click to expand...
Click to collapse
Are you sure of it ? did you buy it ?
You succefuly booted to twrp and tried to flash ROM ?
Because i used ADB command PUSH and managed to get ROM into /data/ folder in my phone , so i'm trying to flash them but it's not working at the end i reboot to fastboot
DId that happen to you too ?

benkiller47 said:
Are you sure of it ? did you buy it ?
You succefuly booted to twrp and tried to flash ROM ?
Because i used ADB command PUSH and managed to get ROM into /data/ folder in my phone , so i'm trying to flash them but it's not working at the end i reboot to fastboot
DId that happen to you too ?
Click to expand...
Click to collapse
I booted into fastboot, flashed the individual firmware files and it kept failing on the vendor.
I had a black screen with a red flashing LED on reboot. I claimed on my insurance and they replaced the board on the phone.
I checked on here and online for a resolution and it generally points to a hard brick.

benkiller47 said:
Hi guys , i was running AOSIP PIE rooted and bootloader unlocked. I did an update of Magisk. And then i couldn't flash twrp it was not working , i could still boot phone normally and phone run smooth. Someone told me to flash TWRP with flashify and i did. Here the problems started , i started having error , can't boot anywhere etc...
I followed this tutorial https://forum.xda-developers.com/hua...g-to-t3932203/ for last solution .
But unfortunatly i can't flash VENDOR.img in fastboot , i can flash all except VENDOR.img it says
C:\ADB>fastboot flash vendor VENDOR.img
target reported max download size of 471859200 bytes
sending sparse 'vendor' 1/2 (460796 KB)...
OKAY [ 10.697s]
writing 'vendor' 1/2...
FAILED (remote: Command not allowed)
finished. total time: 10.711s
I have flashed with success TWRP twrp-3.3.1-0-charlotte , i can get to it but there is no files inside the phone and it's not supporting SD cards to i don't have any ROM to flash ...
Do you guys have any idea about what to do ?
Thank you very much
Click to expand...
Click to collapse
You must use OTG! Probably Flashify borked a partition,but i don't think it borked vendor.
However, you should still be able to flash a FullOTA with TWRP + NoCheck combo.
If you can't manage that, hit me on Telegram,i'm @Pretoriano80 in there!

You can flash EMUI based FW using an OTA method. It should work. But it will lock your bootloader and you will have to unlock it again.

benkiller47 said:
Hi
Click to expand...
Click to collapse
Are you flashing the same or later firmware??