How to install TWRP - Sony Xperia E1

Nwver had problem like that, but I canno manage it on my own.
What I have:
rooted E1 Single (e2005),
kernel with Philx Touch,
zip with FalconSS Revamp R2,
zips with TWRP 2 and TWRP 3.
What I do:
Flash kernel with Philz.
Copy zips to E1.
Boot to Philz.
Flash FalconSS.
Flash either of TWRPs.
WIpe Cache and Dalvik.
Bootloop on Sony logo.
Should I use normal Falcon? (will try it in a moment)
Or maybe other stock firmware? (have 20.1.A.2.19)
All I want is working TWRP with support for Nougat.

Ok. Normal Falcon was what I needed. Now LOS14.1 is booting

Related

xzdr for cm12.1 or cr droid ub (Not tested on ub)

no i think i its time to help a bit because of
some people have issues with the cm recovery on cm12.1 roms
cm rec is not really good
some people want to use (flash) xposed or so
so here is my file (moded kernel ) for cm12.1 (also works on cr droid 02.08)
credits to
sony for the device z3tab comp lte because its the best 8inch tab
nut for the kernel repack and his xzdrec
cyanogen inc for the 06.08 nightly and the boot img
and the dev of ndr utills
Instrucktions
if you are on stock rom
1. flash cm or cr droid from dual recovery
2. flash gaaps
3.flash sgp621 kernel from attachments
4.boot to sytem
5. test to boot from system to recovery if it works all fine
6. if you see in step 5 the cm recovery boot device to fastboot
and unpack the twrp zip from attach and seleckt fastboot on flashtool then hotboot kernel or flash kernel select the twrp img and flash it now in twrp flash the attached cm kernel and reboot.
Anyone tried this yet?

Stuck at CyanogenMod

Hi everybody! I wanted a better battery life for my Z1 (1 screen hour at 75% :crying: ) so i flashed the CM11 latest snapshot, (as we all know, the LP builds has a very horrible battery management) and it worked, but when i switched from MX ROM to CM11 i lost my recovery (dual recovery) and it were replaced with CWM, i tried to install TWRP with some apps like Rashr, Flashify, ROM manager, Multirom manager and many others but it wasnt successful, and now im trying to flash a stock build of LP but flashtool gives to me this error:
- root this bundle is not valid -
I tried with a KK build but it was the same result. So I am stuck in CM, i dont know what more can i do... Can anyone help me?
The Bankshooter said:
Hi everybody! I wanted a better battery life for my Z1 (1 screen hour at 75% :crying: ) so i flashed the CM11 latest snapshot, (as we all know, the LP builds has a very horrible battery management) and it worked, but when i switched from MX ROM to CM11 i lost my recovery (dual recovery) and it were replaced with CWM, i tried to install TWRP with some apps like Rashr, Flashify, ROM manager, Multirom manager and many others but it wasnt successful, and now im trying to flash a stock build of LP but flashtool gives to me this error:
- root this bundle is not valid -
I tried with a KK build but it was the same result. So I am stuck in CM, i dont know what more can i do... Can anyone help me?
Click to expand...
Click to collapse
KK custom roms have recovery inside kernel. You have recovery in your FOTA or Recovery partition. The in-kernel recovery won't let you start Fota recovery, no matter what you try to install. Latest LP roms, as well as MM don't have recovery in kernel. So, you want to fastboot an LP kernel that has no recovery: fastboot flash boot boot.img. Then fastboot TWRP: fastboot flash recovery recovery.img. After that, you can boot into TWRP recovery and install whatever you want...
optimumpro said:
KK custom roms have recovery inside kernel. You have recovery in your FOTA or Recovery partition. The in-kernel recovery won't let you start Fota recovery, no matter what you try to install. Latest LP roms, as well as MM don't have recovery in kernel. So, you want to fastboot an LP kernel that has no recovery: fastboot flash boot boot.img. Then fastboot TWRP: fastboot flash recovery recovery.img. After that, you can boot into TWRP recovery and install whatever you want...
Click to expand...
Click to collapse
Thanks a lot! Ill try it

Downgrade OxygenOS from 3.5.2 to 3.2.6 with Root / Xposed / Debloat

So I downgraded my Oneplus 3 from 3.5.2 to 3.2.6 and this was kind of a painful process, so I decided to share my experience with you.
If you follow this guide you will successfully downgrade from the latest Community Build to the newly released stable.
Note: Just because this worked for me, doesn't mean that it will work for you! Use this guide on your own risk and always use backups!
You'll need:
- Oneplus with OOS 3.5.2 and modified TWRP
- OxygenOS 3.2.6 Full ROM
- Latest official TWRP
- AndroidSDKSlim (needs Oneplus 3 USB drivers installed)
- SuperSU 2.78 SR1
- Xposed Framework (optional)
- Debloat Script (optional)
Downgrade:
Before you start, please create a COMPLETE backup of all your data.
You will factory reset your phone during the process.
1. Copy OOS 3.2.6 Full ROM, SuperSU, Xposed, Debloat Script to your Oneplus
2. Flash modified TWRP if you haven't already
3. Boot into modified TWRP
4. Select Wipe -> Advanced Wipe -> Select all but internal storage -> Swipe to Wipe
5. Install OOS 3.2.6 Full ROM
6. Reboot into system and use the installation wizard to setup your phone (do not setup fingerprints, or any device PIN)
7. Reboot into bootloader
8. Connect your phone to a PC/Notebook
9. Extract AndroidSDKSlim to your Desktop and copy twrp-3.0.2-1-oneplus3.img into \AndroidSDKSlim\android-sdk-windows\platform-tools
10. Run CMD with admin rights and navigate to \AndroidSDKSlim\android-sdk-windows\platform-tools
11. Run "fastboot flash recovery twrp-3.0.2-1-oneplus3.img" to revert to official TWRP recovery
12. Disconnect your phone and boot into recovery
13. Dirty flash OOS 3.2.6 again (this might sound stupid but it's mandatory)
14. Still in recovery, flash SuperSU, Xposed and Debloat Script
15. Wipe Dalvik & Cache
16. Reboot into system and setup your phone
Thanks for your guide !
Can you just please detail how to revert back to a custom ROM like RR or Nuclear when we come from Oxygen OS 3.5.2 community build ?
darkbash said:
Thanks for your guide !
Can you just please detail how to revert back to a custom ROM like RR or Nuclear when we come from Oxygen OS 3.5.2 community build ?
Click to expand...
Click to collapse
You're welcome.
Unfortunately, I can't provide guides for procedures I never went through.
But I asume that you could just flash any Custom ROM after you completely wiped your phone in step 4. So instead of flashing OOS 3.2.6 afterwards, just flash a custom ROM. Be sure that you have all zips you need on your internal storage and a backup to revert back to, if anything goes wrong. Otherwise you will have to use ADB sideload to install a ROM.
Ok, so I have a Modified TWRP installed already. Question is If I want to flash other ROMS after wiping system,dalvik/cache,data etc. Do I have to Flash official TWRP first followed by firmware,ROM, etc?
or firmware first then ROM and lastly official TWRP?
it's quite confusing.
I made a mistake and I installed the modified recovery installed the 3.5.2 rom and before booting I decided to restore my nand backup so I flashed the official twrp recovery and now I can't go to recovery anymore and the phone doesn't boot.
I imagine I have to sideload the modified twrp again but how do I do that? How do I reboot to bootloader ?
This is the only sign of life
gigeaky said:
I made a mistake and I installed the modified recovery installed the 3.5.2 rom and before booting I decided to restore my nand backup so I flashed the official twrp recovery and now I can't go to recovery anymore and the phone doesn't boot.
I imagine I have to sideload the modified twrp again but how do I do that? How do I reboot to bootloader ?
This is the only sign of life
Click to expand...
Click to collapse
Flash modified TWRP, and the recovery will return. then, follow the guide. it happened to me too.
darkbash said:
Thanks for your guide !
Can you just please detail how to revert back to a custom ROM like RR or Nuclear when we come from Oxygen OS 3.5.2 community build ?
Click to expand...
Click to collapse
First flash modified TWRP than install official 3.2.4 than flash CM ROM or custom ROM
uniQ191 said:
So I downgraded my Oneplus 3 from 3.5.2 to 3.2.6 and this was kind of a painful process, so I decided to share my experience with you.
If you follow this guide you will successfully downgrade from the latest Community Build to the newly released stable.
Note: Just because this worked for me, doesn't mean that it will work for you! Use this guide on your own risk and always use backups!
You'll need:
- Oneplus with OOS 3.5.2 and modified TWRP
- OxygenOS 3.2.6 Full ROM
- Latest official TWRP
- AndroidSDKSlim (needs Oneplus 3 USB drivers installed)
- SuperSU 2.78 SR1
- Xposed Framework (optional)
- Debloat Script (optional)
Downgrade:
Before you start, please create a COMPLETE backup of all your data.
You will factory reset your phone during the process.
1. Copy OOS 3.2.6 Full ROM, SuperSU, Xposed, Debloat Script to your Oneplus
2. Flash modified TWRP if you haven't already
3. Boot into modified TWRP
4. Select Wipe -> Advanced Wipe -> Select all but internal storage -> Swipe to Wipe
5. Install OOS 3.2.6 Full ROM
6. Reboot into system and use the installation wizard to setup your phone (do not setup fingerprints, or any device PIN)
7. Reboot into bootloader
8. Connect your phone to a PC/Notebook
9. Extract AndroidSDKSlim to your Desktop and copy twrp-3.0.2-1-oneplus3.img into \AndroidSDKSlim\android-sdk-windows\platform-tools
10. Run CMD with admin rights and navigate to \AndroidSDKSlim\android-sdk-windows\platform-tools
11. Run "fastboot flash recovery twrp-3.0.2-1-oneplus3.img" to revert to official TWRP recovery
12. Disconnect your phone and boot into recovery
13. Dirty flash OOS 3.2.6 again (this might sound stupid but it's mandatory)
14. Still in recovery, flash SuperSU, Xposed and Debloat Script
15. Wipe Dalvik & Cache
16. Reboot into system and setup your phone
Click to expand...
Click to collapse
worked like magic. Thankyou for this education. it didnt work when i followed other folks. Much appreciated.
So it seems I have booted with 3.5.2 and modified recovery. Now my question is: can I reboot in recovery at step 7 and install the original twrp recovery? Or can I use flashify? As I don't have access to a pc
I did ok but cant use adaway do you have a fix for it?
Enviado do meu ONEPLUS A3003 através de Tapatalk
I'm trying to return to 3.2.6 after trying 3.5.2.
However, after flashing and booting 3.2.6, I boot into fastboot mode and the official TWRP refuses to flash. It reports that it's failed and then I'm left with no recovery until I reflash the modified TWRP.
I could try restoring my Nandroid backup of 3.2.6 with the modified TWRP, but I'd prefer to return to the official TWRP before doing this.
Any suggestions?
Edit: Fixed it. I downloaded the official TWRP again and it flashed. The first download must have been corrupted.
I followed a different method and successfully downgraded today to a former nandroid. I was rooted without xposed.
3.2.6 to 3.5.2 dirty flash
- installed modded twrp
- performed backup on 3.2.6
- installed modded 3.5.2 (the only that flashes in twrp)
- installed root SR1
- wiped caches only
- reboot
3.5.2 to 3.2.6 restore
- downloaded 3.2.6
- boot to modded twrp, wipe both caches, data, system
- flashed 3.2.6 stock and root SR1
- restored 3.2.6
- wiped caches
- reboot
- enjoying my LTE again
Without first installing stock, after a restore my phone was boot locking right after the oneplus white logo (capacitive buttons would light up, but it would not boot to red logo). Had to press vol down and power to force it to boot menu to select recovery and get back to twrp
Hope this helps someone, it's a bit easier than swapping twrps and no need to boot up/flash 3.2.x twice.
So if I am on the CB and want to go back to 3.2.6
I can flash 3.2.6 with the modded TWRP
Then flash Official TWRP and boot?
If I have official recovery, no root, and locked bootloader, can I downgrade from 3.5.3 to 3.2.6 without any problems, just by sideloading the zip in ADB? Thankss
popab said:
If I have official recovery, no root, and locked bootloader, can I downgrade from 3.5.3 to 3.2.6 without any problems, just by sideloading the zip in ADB? Thankss
Click to expand...
Click to collapse
i would also like to know this please
bigup7 said:
i would also like to know this please
Click to expand...
Click to collapse
I did it and it does work perfectly. Just make sure to wipe data from recovery after flashing.
I was on Comunity Build v.3.5.4. I want it back FreeDom v.1.6.
I did:
1. Flash Twrp-3.0.2-19-oneplus3.img.zip. Somebody sugested original twrp 3.0.2.1 from twrp site. For me did NOT work. Phone not booting in recovery with 3021.
2. Advanced wipe. Wipe dalvik cache/cache/system/data
3. Flash Freedom v.1.6. Clean Flash it's safer & better.
Done. System works. Recovery works.
null0seven said:
I was on Comunity Build v.3.5.4. I want it back FreeDom v.1.6.
I did:
1. Flash Twrp-3.0.2-19-oneplus3.img.zip. Somebody sugested original twrp 3.0.2.1 from twrp site. For me did NOT work. Phone not booting in recovery with 3021.
2. Advanced wipe. Wipe dalvik cache/cache/system/data
3. Flash Freedom v.1.6. Clean Flash it's safer & better.
Done. System works. Recovery works.
Click to expand...
Click to collapse
I am on CB Freddom os
I want to go back either to stock or to op3lite.
I cant reboot to recovery.
But adb works yet.
What to do plz suggest.
Sent from my ONEPLUS A3003 using Tapatalk
1. If system don't boot. Reboot to fastboot.
- Flash recovery.img. If PC don't see youre phone option 2.
2. If system boots, open phone like normal.
- Extract recovery img. Put it on the TWRP file on phone sd card.
- Download Flashify from play. Open it, flash img of recovery. Open recovery to chech if it works.
Try with both recovery (3.0.2.0 or modified 3.0.2.-19). One of those will work.
Im getting system partition has unexpected contents after OTA update after installing step 5 ????

Update TWRP to 3.0.2.0 - XZDualRecovery

Hello, I installed TWRP via XZDualRecovery ( https://forum.xda-developers.com/showthread.php?t=2647487 ), because I have locked bootloader.
I want to update TWRP to 3.0.2.0. I tried TWRP app from Play Store - it said "Flash succesful", but I stil have 2.8.7.0. I wanted to flash 3.0.2.0 image via TWRP, but I can flash .img only to Kernel partition - no option to flash to recovery partition shows.
I'm new to this. Is there other some way to flash recovery or I have to wait for XZDualRecovery update? (Not sure if fastboot would work - i have locked bootloader)
Thanks!
(And sorry for my bad english ^^)
Install it to your FOTAKernel and than another rom because I think stock .236 doesnt work with recovery partition.
I've should also wrote, that I'm not using stock ROM, but DStrikerZ1's ROM.
But thanks, I'll take a look at that FOTAKernel thing ^^

Get opt encrypt and update rom [stock recovery and boot opt encrypt with magisk]

Here is my tutor after a hard work on my zenfone 4 max whole day.
first of all you must download the last asus update for zenfone 4 max, I used 233.
put it into sd card, boot into stock recovery and update. (if you have a new phone just do it, if you already unlocked bootloader and installed twrp, just boot bootloader and flash stock recovery above.)
https://drive.google.com/open?id=1YP7v9sBclQULxYPOndDPCMLikZsT8urN
after this step, just do unlock bootloader. (if not unlocked), and flash twrp.
*recommended reboot recovery twrp and make a backup now
reboot bootloader and flash the boot above, it has no decrypt and magisk 16
https://drive.google.com/open?id=1bHk0znQNsH-dWZ89P525gC-rrvN4e9bl
reboot recovery twrp. Do the following:
format data partition,
reboot recovery twrp
clear data, cache and dalvik cache.
Now boot system, all data encrypt is gone, and you can activate it if you want.
You cant boot system until this boot image is flashed, or encrypt will be activated.
How does one flash the kernel?
amspady20 said:
How does one flash the kernel?
Click to expand...
Click to collapse
kernel is the core, it is in boot image.
fastboot flash boot boot.img
(after extract boot image, cause it is zipped)
Stock Recovery
Do you have stock recovery img file for our Zenfone 4 Max (ZC554KL)? Kindly upload it again.
Hi, do you have latest stock recovery for this device? I want to update to oreo, but it requires latest firmware (at least ver .352) to execute it.
latest recovery version
Hi alegmx!
i'm really thankful that you provide this stock recovery image , it works!
but can you provide us with a newer version of the recovery image? it'll be big help if you can provide it with us!
your version is currently .215 , im upgrading my os to version 412 and it needs atleast the .352 version of the recovery.

Categories

Resources