Whats the best gcam mod version for the 7 Plus?
The aranova mod stopped working as well
Yes,i confirmed it,this is not a good security pack
Please read the forum. There's already a substitute https://forum.xda-developers.com/nokia-7-plus/themes/nokia-7-plus-google-camera-hdr-zsl-t3775956
Gcam crashing
After the june security patch the gcam is not working anymore its force closing. Can we get a solution for this.
Thanks in advance
gawthamgdath94 said:
After the june security patch the gcam is not working anymore its force closing. Can we get a solution for this.
Thanks in advance
Click to expand...
Click to collapse
before post, can you please read previous post's where aleready is info? right before your post:
https://forum.xda-developers.com/no...d-crashes-june-security-t3804010/post76812625
Related
Hello. I installed CM13 on my S3 I9300 yesterday and it works flawlessly. The problem is with Xposed though. I installed it and updated it without any problems, no bootloops. But after I ENABLE the downloaded Module, I am required to reboot the phone, but it just stays in the boot loop, so I am required to use the Xposed uninstaller. Any suggestions??
@.ALph4.
You did not have to create a topic without first looking at the discussion of xposed for marshmallow, verifying for sure I'm having the same problem.
This was due to the new security patch of the month of November, causing bootloop when activating the modules. If you want to use xposed I advise you to try a previous version of cm13, I believe that from the 13th of that month, all will give this error, try one of the previous day.
EsromG5 said:
@.ALph4.
You did not have to create a topic without first looking at the discussion of xposed for marshmallow, verifying for sure I'm having the same problem.
This was due to the new security patch of the month of November, causing bootloop when activating the modules. If you want to use xposed I advise you to try a previous version of cm13, I believe that from the 13th of that month, all will give this error, try one of the previous day.
Click to expand...
Click to collapse
So do you think it will get fixed soon? Because I don't really wanna roll back right now and I can wait. Tnx for telling me this.
.ALph4. said:
So it should get fixed in few days? Because I don't really wanna reroll right now and I can wait. Tnx for telling me this.
Click to expand...
Click to collapse
Press the thank you button to really thank
On the issue correction, we must wait, it all depends on the time and patience of the developer of xposed, as I believe the cyanogenmod team will not change the security patch for this.
EsromG5 said:
Press the thank you button to really thank
On the issue correction, we must wait, it all depends on the time and patience of the developer of xposed, as I believe the cyanogenmod team will not change the security patch for this.
Click to expand...
Click to collapse
As long as they can fix it I am fine with waiting. Good to know that it isn't just my phone... Thanks man.
Just to be clear, it worked just fine before that November security patch??
Edit:F*** them. https://forum.cyanogenmod.org/topic...loop-when-modules-are-enabled/#comment-614420
Moving to Resurrection Remix.
.ALph4. said:
Just to be clear, it worked just fine before that November security patch??
Edit:F*** them. https://forum.cyanogenmod.org/topic...loop-when-modules-are-enabled/#comment-614420
Moving to Resurrection Remix.
Click to expand...
Click to collapse
F them for not supporting third party modifications and prioritizing security updates?
Sent from my Nexus 6P using XDA Labs
What is it?
All you need to got NFC on GSI Rom's for Kirin Devices.
It's tested on Honor 9 lite (Kirin659)
Why do i need that?
To get NFC working.
What should i know... Changelog...
v.1.0 (06.06.2018)
- initial release
Download
You can download the Module here.
Thx to...
topjohnwu for Magisk
and everybody i forgot (sry!)
Google Play services crashes.
Hey, first of all thanks for this module! It does work and does what it's supposed to do.
However I somehow constantly get messages that google play services crash.
From the console it seems like it might be some interaction with magisk hide?
Device is Honor 9 lite LLD-L31 with OpenKirin RR beta 3
Any help is greatly appreciated as this sadly pretty much kills using this module for me :/
Hey, someone has the module? The link doesnt work anymore.
Thanks!
Bidino said:
Hey, someone has the module? The link doesnt work anymore.
Thanks!
Click to expand...
Click to collapse
Did you find it?
Hi
I'm using april patch on my Pixel 4 and using a magisk module for activating motion sense on my device and I want to update but first to make sure that Soli can be enabled again, like I did.
There is someone in may or june update and with motion sense working with magisk or another trick? Can you explain to me to make it work?
Thanks you all!
On May update you can use motion sensor. Just edit buid prop..
pixel.oslo.allowed_override to 1..
I don't know about june update, because I didn't get that update yet.
Not working for me on may or june updates . Magisk module not working (1.2) . And i m passing safetynet checks.
Haxxan7 said:
On May update you can use motion sensor. Just edit buid prop..
pixel.oslo.allowed_override to 1..
I don't know about june update, because I didn't get that update yet.
Click to expand...
Click to collapse
ummm, if you can explain how you did it, it would be awesome. I was using the magisk module for the simplicity of it, I don't know a lot about this.
Thanks for the answer!
baleskoil said:
Not working for me on may or june updates . Magisk module not working (1.2) . And i m passing safetynet checks.
Click to expand...
Click to collapse
Thanks for the answer, maybe we'll need to use other ways.
Hi everyone,
when I'm using AA and I unlock the phone, AA immediately goes down and few seconds later come back;
it's the same of removing the USB-cable and put it back. I'm sure it's not a cable problem, but a software one..
This problem started after the latest Samsung Galaxy Note 10 update was installed.
thanks to everyone will help me
EDIT: I tried to disinstall and reinstall AA; Clear cache of the entire phone by (stock) recovery; and many other attempts.
Phone - Samsung Galaxy Note 10 (Stock, no root)
Car - Audi A3 2020
Shandroid, I think it's the same issue as in this one:
AA Shutting down after screen unlock
Hi all guys, I've been missing a long time from here, so please be care enough to forgive me if I posted the thread in the wrong place. I'm currently using Android Auto and enjoying very much the amazing work made from Gabriele (AAAD, of which I...
forum.xda-developers.com
I can confirm that the issue is related to the last Sammy update , I have downgraded to may update , now aa works
__Michael__ said:
I can confirm that the issue is related to the last Sammy update , I have downgraded to may update , now aa works
Click to expand...
Click to collapse
so no solutions for this problem except downgrade?
Hi, still no solution ? It's really annoying
I have read on other forums that Google has acknowledged an issue here, and that they have provided a fix to Samsung which should be included in the July patch. I was anxiously waiting for this fix, but after applying it, the problems is still not fixed on my EU Note10+. Anyone else who still has the AA problem on Samsung after applying the July patch?
gschot said:
I have read on other forums that Google has acknowledged an issue here, and that they have provided a fix to Samsung which should be included in the July patch. I was anxiously waiting for this fix, but after applying it, the problems is still not fixed on my EU Note10+. Anyone else who still has the AA problem on Samsung after applying the July patch?
Click to expand...
Click to collapse
Still have the problem instead of july patch installed.. don't know what to do to solve..
Shandroid_94 said:
Still have the problem instead of july patch installed.. don't know what to do to solve..
Click to expand...
Click to collapse
I guess wait for the August patch and see if it is fixed there. I must say that I find the AA connection very unstable anyhow, many spontaneous disconnects/reconnects.
gschot said:
I guess wait for the August patch and see if it is fixed there. I must say that I find the AA connection very unstable anyhow, many spontaneous disconnects/reconnects.
Click to expand...
Click to collapse
Let's see for August patch then
gaurika said:
Shandroid, I think it's the same issue as in this one:
AA Shutting down after screen unlock
Hi all guys, I've been missing a long time from here, so please be care enough to forgive me if I posted the thread in the wrong place. I'm currently using Android Auto and enjoying very much the amazing work made from Gabriele (AAAD, of which I...
forum.xda-developers.com
Click to expand...
Click to collapse
August patch did fix the issue! S10e
SOLVED with the ultimate security patch 1, August on my Note 10!
Fixed also for S10+ with August '21 patch. Finally!
Hi, I installed Wichaya's GCam APK (Wichaya's 8.1 v1.5 but when I try to open it, it crashes instantly. It doesn't happen with other camera apps. What can I do to fix this?
I think you need to install GCam Services Provider. On Los4MicroG I did not need it, but maybe on stock LOS its needed https://github.com/lukaspieper/Gcam-Services-Provider
Adaoh said:
I think you need to install GCam Services Provider. On Los4MicroG I did not need it, but maybe on stock LOS its needed https://github.com/lukaspieper/Gcam-Services-Provider
Click to expand...
Click to collapse
This fixed it for me, thank you very much. Pretty strange that when I was searching for a solution, I didn't come across the GCam Services Provider. But thanks again it has been solved now.