LLD-L21 Bricked - Honor 9 Lite Questions & Answers

I bricked my H9L by getting the Kingvip Rom it worked but then I reset my phone from settings and had the Chinese twrp installed so the reset happened in the buggy twrp and then my phone went into a boot loop and just before I did this I had made a backup in the buggy twrp then i realized there was a non buggy twrp so I downloaded it but before i flashed that recovery i first tried to restore form the bad twrp and i got an error(error failed to flash system.img) so i flashed this twrp the one by Pretoriano80 which the restore worked but the phone was stuck in a boot loop so i did not know what to do Please help Me I also tried the update app in dload in sdcard it did not work and tried every way on the internet
My model : LLD-L21
Build No : Unknown
Software : LLD-L21A and the something I don't know
I'm only 13
I did such a thing on my Samsung tab and my old phone which was a Samsung Galaxy S6 they all worked flawlessly this is my first device that has failed
Please I need help!
Hope this thread helps people out

Ze7111 said:
I bricked my H9L
Click to expand...
Click to collapse
Restart phone in Fastboot
Flash TWRP version 0.2
Follow this unbrick guide, and search using LLD-L21Cxxx (xxx = your phone's original region)
Ze7111 said:
I'm only 13
Click to expand...
Click to collapse
Old enough to be tried as an adult in court.
Ze7111 said:
this is my first device that has failed
Click to expand...
Click to collapse
I hear that Huawei devices can be a pain in the neck. I'm still getting used to mine.

noobington said:
Restart phone in Fastboot
Flash TWRP version 0.2
Follow this unbrick guide, and search using LLD-L21Cxxx (xxx = your phone's original region)
I hear that Huawei devices can be a pain in the neck. I'm still getting used to mine.
Click to expand...
Click to collapse
Thanks for the help it worked out for me.
I agree huawei device is a pain to mod.

Related

Moto xT1068 stuck on formating data and wiping emmc

Hi guys is title says its stuck on formation data (via recovery) and if I try wiping emmc (via factory mode) it gets stuck there.
It all started when I shared 3 apps superbeam,lucky patcher and busybox installer .as I was transferring I started installations them both super beam and lucky patcher installed successfully but in busybox got stuck in installation I tried to switch off by power key but didn't work so I powered off by small key (hidden near SD card) then restarted but got stuck on android logo (bootloop) then I booted into recovery for clearing data and caches but it got stucked there . then I booted into factory mode to wipe emmc but also got stuck there ..
Now here I am with uncharged phone , if I charge it I boot in clearing data and got stuck but if I boot in factory mode and try to wipe emmc it get stuck there ... Please help here I really need to revive it
Please guys help here I really don't wanna lose this phone too (without doing anything) and its Ben detected as v com port....
*been
I am able to connect as fastboot but fastboot OEM get_unlock_data not working for some reason it just keep processing
All you can try now is go and flash the factory firmware stock (according previous android version 5.0.2 or 6.0)
Factory firmware flashing doesnt require bootloader to be unlocked so u can try this
ArtRahul said:
All you can try now is go and flash the factory firmware stock (according previous android version 5.0.2 or 6.0)
Factory firmware flashing doesnt require bootloader to be unlocked so u can try this
Click to expand...
Click to collapse
You mean booting in fastboot then flash stock ROM ?? Sorry man I am new to Motorola and thanks for reply .... Any link to guide would be appreciated.
Mak29 said:
You mean booting in fastboot then flash stock ROM ?? Sorry man I am new to Motorola and thanks for reply .... Any link to guide would be appreciated.
Click to expand...
Click to collapse
Link to Motorola Android 6.0 Stock Firmware, this is the perfect guide with all the steps. viola bhava !
ArtRahul said:
Link to Motorola Android 6.0 Stock Firmware, this is the perfect guide with all the steps. viola bhava !
Click to expand...
Click to collapse
Really sorry to bother you again but now I got it what and how to do (since I m new to Motorola) but after I researched I found I can only flash firmware it was built on so I just need to start flashing xt 1068 br version right? (I found firmware too) I just need pro advice please...
ArtRahul said:
All you can try now is go and flash the factory firmware stock (according previous android version 5.0.2 or 6.0)
Factory firmware flashing doesnt require bootloader to be unlocked so u can try this
Click to expand...
Click to collapse
i tried your method but when trying to flash mfastboot.exe flash partition gpt.bin it says "not supported partition"
Mak29 said:
i tried your method but when trying to flash mfastboot.exe flash partition gpt.bin it says "not supported partition"
Click to expand...
Click to collapse
As I previously said (according to your previous android version means when phone is dead then whatever is the android version (5.0.2 or 6.0) you need to flash the files.)
For eg.
If (your phone is on 5.0.2) then
you need to flash stock 5.0.2 firmware.
elseif (your phone is on 6.0) then
you need to flash stock 6.0 firmware.
endif.
Note: Don't flash wrong files, else it's gonna brick the device.
Don't ever downgrade from latest android version to previous.
Thanks
ArtRahul said:
As I previously said (according to your previous android version means when phone is dead then whatever is the android version (5.0.2 or 6.0) you need to flash the files.)
For eg.
If (your phone is on 5.0.2) then
you need to flash stock 5.0.2 firmware.
elseif (your phone is on 6.0) then
you need to flash stock 6.0 firmware.
endif.
Note: Don't flash wrong files, else it's gonna brick the device.
Don't ever downgrade from latest android version to previous.
Thanks
Click to expand...
Click to collapse
Bro I tried that but unable to flash since gpt.bin is not supported partition
Mak29 said:
Bro I tried that but unable to flash since gpt.bin is not supported partition
Click to expand...
Click to collapse
Have you re-tried that.
That was the last and the least option I knew, hope someone else with higher knwldge will help u out in this.
ArtRahul said:
Have you re-tried that.
That was the last and the least option I knew, hope someone else with higher knwldge will help u out in this.
Click to expand...
Click to collapse
If I retry is is not gonna damage phone?
Mak29 said:
If I retry is is not gonna damage phone?
Click to expand...
Click to collapse
Flashing the factory image never damages the device.
So you can try again but with right things right files and carefully.
ArtRahul said:
Flashing the factory image never damages the device.
So you can try again but with right things right files and carefully.
Click to expand...
Click to collapse
Just 1 more thing ..do I need to start direct flash or follow whole process (locking unlocking) command?
Mak29 said:
Just 1 more thing ..do I need to start direct flash or follow whole process (locking unlocking) command?
Click to expand...
Click to collapse
You can start without lock/unlocking BL.

HELP with bricked device honor 4x che2-l12

i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
Can you boot into bootloader ?
You may change your recovery to the origine one then flash a new ROM
Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
What's the status of your phone?
If you can acces fastboot mode it's ok
Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
If you can enter fastboot mode and download official ROM pack, then you are all good.
Method:
http://forum.xda-developers.com/showpost.php?p=68695798&postcount=2
I need help I have che2-l11 model I was formated my mobile and install twrp.after that I was trying to find Rom but there is no Rom available.but again I was installing stock firmware it's also not installing giving compatibility error I also tried other firmware but non of these firmware working.and currently my mobile is only showing Huawei logo.please help me
kamrangul87 said:
I need help I have che2-l11 model I was formated my mobile and install twrp.after that I was trying to find Rom but there is no Rom available.but again I was installing stock firmware it's also not installing giving compatibility error I also tried other firmware but non of these firmware working.and currently my mobile is only showing Huawei logo.please help me
Click to expand...
Click to collapse
Fastboot method most probably is your only choice now.
Follow this method here:
https://forum.xda-developers.com/showpost.php?p=68695798&postcount=2
Minioide said:
i rooted the phone, installed twrp and wiped everytginf in the wipe options of the recovery. Yes, that was completwly stupid, i know.
And, of course, now it is stuck on honor boot logo
How can i fix this?
Thank you
Click to expand...
Click to collapse
Reboot to recovery wit volume up + power button trigger . and then click on reboot button and then select reboot to bootloader. Their you flash system.img , boot.img and cust.img to their partitions. And then reboot . if u understand what I said I will help u further .
A little bit of help needed...
Hi,
I basically did the same mistake as the other guys, unlocked the bootloader and installed twrp, all fine. Then I ***** up by trying to root fellowing a tuto made for the non-Che2-L11 ones.
I have no problem going into TWRP, the bootloader, or the black screen from huawei (witch looks like.. some kind of second recovery ?)
I managed to download the stock software from huawei ( Honor 4X Firmware (Che2-L11, Android5.1.1, EMUI3.1, C636B360, Malaysia)S.zip ) and also managed to download a version of HuaweiUpdateExtractor ( 0.9.9.5 ).
My problem now, is that if I understood correctly, I should extract the image files from the APP from the firmware zip I downloaded from Huawei.
Unfortunatly, there is no HuaweiUpdateExtractor profile for the honor 4x Che2-L11.
There I may need assistance, or guidance.
Does the profile already exists somewhere ?
How can I create my own, is it not too complex ?
Maybe someone already extracted thoses files and could make them available somewhere ?
Or maybe is there any other way to unbrick my phone ?
************************************
EDIT: Nevermind. I managed to extract the files without profiles. I flashed them 3 but nothing really changed.. So.. I'm kinda stuck. no Idea from here.
************************************
************************************
EDIT (of the edit) : Nevermind the previous nevermind ! It actually worked ! Well, kinda.. Seems my new "stock rom" is quite buggy, strangly, but nevertheless, it work Thanks
************************************
Thanks a lot.
Hello
Hello friend, i also have the same problem. My huawei honor 4x che2-l11 stuck on huawei logo i can not unbrick it. if you succsed so plz attach the file you extract to my email plzzzzz.
email: [email protected]
Thanks.

[HELP THREAD] Ask any questions [NOOB FRIENDLY]

Welcome everyone!
This thread has been created for extreme newbies/noobs and for their benefit. Not only noobs, but everyone is free to post questions and also give answers to those questions. Any type of question is allowed as long as it is related about the device. No off-topic discussions are allowed!​
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
Honor 4x hanged (in some Indian kitkat version, not rooted) and after restart it is in bootloop. Honor logo appears then blue light starts to appear then restart.
Recovery mode and dload update not working.
After unlocking bootloader tried fastboot -w, still in bootloop.
Extracted Lollipop, Marshmallow, Kitkat - B161, B126 and flashed in fastboot. Possible to flash only recovery, boot, userdata & system. For others - failed : remote command not allowed. After flashing no change, still in bootloop.
Tried to boot to recovery from fastboot boot
- for lollipop and marshmallow recoveries it says "dtb not found"
- others including twrp, cm it is in bootloop.
Out of warranty.
Need help.
oppili said:
Honor 4x hanged (in some Indian kitkat version, not rooted) and after restart it is in bootloop. Honor logo appears then blue light starts to appear then restart.
Recovery mode and dload update not working.
After unlocking bootloader tried fastboot -w, still in bootloop.
Extracted Lollipop, Marshmallow, Kitkat - B161, B126 and flashed in fastboot. Possible to flash only recovery, boot, userdata & system. For others - failed : remote command not allowed. After flashing no change, still in bootloop.
Tried to boot to recovery from fastboot boot
- for lollipop and marshmallow recoveries it says "dtb not found"
- others including twrp, cm it is in bootloop.
Out of warranty.
Need help.
Click to expand...
Click to collapse
Oh ****, that seems like a frustrating situation. What made the device mess up so much? Have you gone to service centres?
Regards,
PoseidonKing
Not tried to flash or root. It just hanged while using.
Service centre said board gone (as always). MTK devices have a factory mode through which we can check working of all board parts. I did not find any way for this.
oppili said:
Not tried to flash or root. It just hanged while using.
Service centre said board gone (as always). MTK devices have a factory mode through which we can check working of all board parts. I did not find any way for this.
Click to expand...
Click to collapse
Sorry bro, can't help you out over here in this situation.... Best of Luck regarding your device. I would suggest pm'ing a forum moderator for your issue
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
HELP.!!Back to Stock Rom ????
I am struggling like anything to go back to stock rom. I am using Honor 4x Che1-L04 snapdragon. Pls send a link where can i find the instructions to do this. Or Better U expain.
EDIT:
Roll back to EMUI 4.0 success. Used the Hauwei update extractor and used CMD. Anyhow THANKS
NEW Problem:
How to enable ADOPTED STORAGE in honor 4x che1-L04 snapdragon edition.
In Xda they mentioned only about the kirin processor version.
Help!!!!!!!!!!
balongc52b311 after failing kangvip 6.7.1
hey there. will tell you my experience with failing to flashing kangvip 6.7.1 due to wiping problem
i wiped my cache, data, system even internal storage and yet failed to flashing kangvip 6.7.1 4 custom rom due to "cust" folder unable to mount giving me this:
error 1 can't mount /cust (Invalid argument)
so after failing to mount that folder and even deleting it by mistake,i got a new error:
error 1 can't mount cust no such file or directory
i lost hope and let my my honor 4x normally boot but it took too long and i was determined its stuck on bootloop :cyclops:
i woke up today finding it on 5% battery and giving me that first time setup as if all i did was a factory format BUT all in chinese. checked the build number and it was balongc52b311.
i tried mounting "cust" folder to r/w and rebooted into bootloader but it gave me the same first error. i tried deleting the folder and then rebooting into recovery and it gave me the 2nd error. created the folder "/cast" and then rebooted into recovery and it gave me the same first problem that the folder can't mount EVENTHO it was mounted successfully right before i rebooted into recovery (did this 3 times to make sure)
did some researching and found a solution for honor 4c http://forum.xda-developers.com/honor-4x/help/huawei-honor-4x-balong-hi6210sft-fixed-t3324335 or two BUT both for lolllipop and i'm marshmallow.
i'm already halfway at the method i mentioned above but i stopped after i realized it was for lollipop. i rooted my mobile and changed my build number to "Che2-L11C636B330". worth to mention that my model number remained already the same "Che2-L11".
the cust folder error is still there whenever i go to the bootloader
now i have no idea what to do, what firmware to download and if i have to downgrade first to lollipop and then upgrade to marshmallow again...
my marshmallow version was the middle east final version before this balong happened: Che2-L11C185B561 and i would like to go back to it again.. thank you in advance ( :
###*UPDATED BELOW*
fixed my problem trying the method here http://forum.xda-developers.com/honor-8/help/honor-8-rooted-twrp-modaco-rom-unable-t3462039/page2
>>>>worth to mention that i flashed my oeminfo for my UPDATE.APK REGION before flashing the extracted files from UPDATE.APP "wasn't mentioned in that method"
now i'm back to my original marshmallow version "middle east". good luck people.
abdurrahmanzaki said:
hey there. will tell you my experience with failing to flashing kangvip 6.7.1 due to wiping problem
i wiped my cache, data, system even internal storage and yet failed to flashing kangvip 6.7.1 4 custom rom due to "cust" folder unable to mount giving me this:
error 1 can't mount /cust (Invalid argument)
so after failing to mount that folder and even deleting it by mistake,i got a new error:
error 1 can't mount cust no such file or directory
i lost hope and let my my honor 4x normally boot but it took too long and i was determined its stuck on bootloop :cyclops:
i woke up today finding it on 5% battery and giving me that first time setup as if all i did was a factory format BUT all in chinese. checked the build number and it was balongc52b311.
i tried mounting "cust" folder to r/w and rebooted into bootloader but it gave me the same first error. i tried deleting the folder and then rebooting into recovery and it gave me the 2nd error. created the folder "/cast" and then rebooted into recovery and it gave me the same first problem that the folder can't mount EVENTHO it was mounted successfully right before i rebooted into recovery (did this 3 times to make sure)
did some researching and found a solution for honor 4c http://forum.xda-developers.com/honor-4x/help/huawei-honor-4x-balong-hi6210sft-fixed-t3324335 or two BUT both for lolllipop and i'm marshmallow.
i'm already halfway at the method i mentioned above but i stopped after i realized it was for lollipop. i rooted my mobile and changed my build number to "Che2-L11C636B330". worth to mention that my model number remained already the same "Che2-L11".
the cust folder error is still there whenever i go to the bootloader
now i have no idea what to do, what firmware to download and if i have to downgrade first to lollipop and then upgrade to marshmallow again...
my marshmallow version was the middle east final version before this balong happened: Che2-L11C185B561 and i would like to go back to it again.. thank you in advance ( :
###*UPDATED BELOW*
fixed my problem trying the method here http://forum.xda-developers.com/honor-8/help/honor-8-rooted-twrp-modaco-rom-unable-t3462039/page2
>>>>worth to mention that i flashed my oeminfo for my UPDATE.APK REGION before flashing the extracted files from UPDATE.APP "wasn't mentioned in that method"
now i'm back to my original marshmallow version "middle east". good luck people.
Click to expand...
Click to collapse
Thanks on the update about your success on restoring your phone. Surely some poor soul will get along the same problem and your post will help him out. Sorry for the late reply btw.
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing
How to Root my honor 4x Che2-L11?
Hi everyone, I'm noob, so I need a step to step guide if there's such a thing
my android version is 6.0 and EMUI 4.0
I have bootloader code for unlocking the phone, thanks in advance guys, also happy new year :good:
Phone Honor 4x (che1-L04) Stuck in fastboot mode
My phone is stuck in fastboot mode. Couldn't get the bootloader unlock key online as it requires the product id which can be obtained by dialing a number which isn't possible. I have requested directly from the customer care number and the official chat portal as well but its been more than a week and still they are asking for 24 working hours. Is there any alternative method of getting the key or atleast the Product ID?
Model name :Che1-L04
Stuck in Fastboot & Rescue mode with the bootloader locked.
I got unlock key after 12 days. Honor 4x hanged after restart it is in bootloop.
3 button sd card update not working ?
oppili said:
I got unlock key after 12 days. Honor 4x hanged after restart it is in bootloop.
3 button sd card update not working ?
Click to expand...
Click to collapse
No the update.app isnt working I guess because I have already flashed the CM13 recovery image with the bootloader locked. However, I recieved the bootloader key yesterday from the email but when I tried unlocking by the fastboot command it said it is an invalid or wrong key. Is there any other way to take my phone back to stock condition atleast without actually unlocking the Bootloader?
Princeshubh said:
No the update.app isnt working I guess because I have already flashed the CM13 recovery image with the bootloader locked. However, I recieved the bootloader key yesterday from the email but when I tried unlocking by the fastboot command it said it is an invalid or wrong key. Is there any other way to take my phone back to stock condition atleast without actually unlocking the Bootloader?
Click to expand...
Click to collapse
1. Try "fastboot continue" it will directly boot without going to recovery.
2. If fastboot flash works flash recovery of the firmware installed in phone before bootloop.
3. If still not works flash boot, system, recovery (in this order) of firmware installed before bootloop.
Confirm unlock key with customer care if it is still locked.
I wanna know is there any other method to install xposed framework since the normal installation is not working for me.
Using Honor 4x Che1-l04 running on (stock ROM) Android marshmallow 6.0.1, have TWRP custom recovery and is rooted.
SumitGupta2442 said:
I wanna know is there any other method to install xposed framework since the normal installation is not working for me.
Using Honor 4x Che1-l04 running on (stock ROM) Android marshmallow 6.0.1, have TWRP custom recovery and is rooted.
Click to expand...
Click to collapse
no other way, unfortunatly.. one way or the other, you have to flash the zip...
ps: if you are on emui, first boot after flashing xposed will take a really long time.. mine took around 25 minutes to boot.. so dont consider it a boot loop, wait untill 30 minutes and you will be profitted
Mine was in boot screen for around 3 minutes and then rebooted into recovery. Same thing was happening again and again. So at last did the restore process from TWRP.
oppili said:
1. Try "fastboot continue" it will directly boot without going to recovery.
2. If fastboot flash works flash recovery of the firmware installed in phone before bootloop.
3. If still not works flash boot, system, recovery (in this order) of firmware installed before bootloop.
Confirm unlock key with customer care if it is still locked.
Click to expand...
Click to collapse
Its not working. Please help me I am still stuck....any way of installing the stock ROM back via fastboot mode with the phone showing 'Phone Locked'
Restoring TOO MUCH with twrp?
Can restoring too much with TWRP damage my phone?
jwalker9715 said:
Can restoring too much with TWRP damage my phone?
Click to expand...
Click to collapse
not really..

Unroot, device bricked

Hi, I have problem.
i unlocked and rooted my honor 5C NEM L-21, but then i changed my mind and wanted to unroot it, when i done it the device bricked. after some investigation a unbricked it via adb, but now i cant go to recovery where i have backed up my old rom. I cant even go to developers options. So now im stuck with partly functional ROM and i cant even done Factory reset. I tried to download and install ROM via Firmware Finder, but always when i try to install the rom, it writes that it is not verified.
Can anyone please help me? Im really worried. Thanks
twrp backup
I found my backup on SD card, but i dont know how to flash it since i cant boot into recovery or enable usb debugging
NameNotFound74 said:
Hi, I have problem.
i unlocked and rooted my honor 5C NEM L-21, but then i changed my mind and wanted to unroot it, when i done it the device bricked. after some investigation a unbricked it via adb, but now i cant go to recovery where i have backed up my old rom. I cant even go to developers options. So now im stuck with partly functional ROM and i cant even done Factory reset. I tried to download and install ROM via Firmware Finder, but always when i try to install the rom, it writes that it is not verified.
Can anyone please help me? Im really worried. Thanks
Click to expand...
Click to collapse
Download stock firmware and flash it via dload method.
i dont know exactly how to do it. Do i just create dload folder on sd card, put the rom in it, then turn off the device, pres volume + and - and power button? or do i have to do even something else?
And where can i download Stock ROM? I downloaded some but i dont know if it is legit, official ROM
NameNotFound74 said:
i dont know exactly how to do it. Do i just create dload folder on sd card, put the rom in it, then turn off the device, pres volume + and - and power button? or do i have to do even something else?
And where can i download Stock ROM? I downloaded some but i dont know if it is legit, official ROM
Click to expand...
Click to collapse
Yes create a dload folder and put update.app in it and press three button...
You can download stock ROM fro Huawei site according to you model number
hassanjavaid8181 said:
Yes create a dload folder and put update.app in it and press three button...
You can download stock ROM fro Huawei site according to you model number
Click to expand...
Click to collapse
Thanks, i will try it!
NameNotFound74 said:
Thanks, i will try it!
Click to expand...
Click to collapse
hassanjavaid8181 said:
Yes create a dload folder and put update.app in it and press three button...
You can download stock ROM fro Huawei site according to you model number
Click to expand...
Click to collapse
So i tried it, but it says: Software install failed! Incompatibility with current version. Please download the correct update package.
NameNotFound74 said:
So i tried it, but it says: Software install failed! Incompatibility with current version. Please download the correct update package.
Click to expand...
Click to collapse
Only firmware which will flash via dload..should be same number or higher number...
For example if you were on b340 you can only flash b340 or higher number like b341 or 350
You cannot flash 330 without rollback pkg
hassanjavaid8181 said:
Only firmware which will flash via dload..should be same number or higher number...
For example if you were on b340 you can only flash b340 or higher number like b341 or 350
You cannot flash 330 without rollback pkg
Click to expand...
Click to collapse
can i flash rollback when i have unlocked bootloader? Information on honor websites says that i cant have rooted or unlocked phone...
NameNotFound74 said:
can i flash rollback when i have unlocked bootloader? Information on honor websites says that i cant have rooted or unlocked phone...
Click to expand...
Click to collapse
now i flashed rollback and it says that im on b300-log, but i still cant flash b350
NameNotFound74 said:
now i flashed rollback and it says that im on b300-log, but i still cant flash b350
Click to expand...
Click to collapse
Did you download correct pkg according to your build number
hassanjavaid8181 said:
Did you download correct pkg according to your build number
Click to expand...
Click to collapse
after that i downloaded another one, with emui 4, works great, now i will just upgrade to emui 5 via OTA. Thank you for your help!
NameNotFound74 said:
after that i downloaded another one, with emui 4, works great, now i will just upgrade to emui 5 via OTA. Thank you for your help!
Click to expand...
Click to collapse
Glad that you fixed it..now enjoy
hassanjavaid8181 said:
Glad that you fixed it..now enjoy
Click to expand...
Click to collapse
Hi, i have another, similar problem... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. Please can you help me somehow?
NameNotFound74 said:
Hi, i have another, similar problem... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. Please can you help me somehow?
Click to expand...
Click to collapse
Did backup restored successfully??
hassanjavaid8181 said:
Did backup restored successfully??
Click to expand...
Click to collapse
No it didn't worked for me. It happened to me twice and either time it didn't work. It was always stuck on honor logo and couldn't be turned on.
NameNotFound74 said:
No it didn't worked for me. It happened to me twice and either time it didn't work. It was always stuck on honor logo and couldn't be turned on.
Click to expand...
Click to collapse
Did you try to change twrp version??
NameNotFound74 said:
Hi, i have another, similar problem... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. Please can you help me somehow?
Click to expand...
Click to collapse
Whats your build number and model?
Are you able to flash twrp or able to boot to it?
Flash Rollback package
NameNotFound74 said:
So i tried it, but it says: Software install failed! Incompatibility with current version. Please download the correct update package.
Click to expand...
Click to collapse
Then stock firmware flash using dload

[GUIDE] Mega Unbrick Guide for A Hard Bricked OnePlus 7 Pro

Similar to the previous threads for OnePlus 5, OnePlus 5T or OnePlus 6, here are the necessary packages to unbrick/revive a hard bricked OnePlus 7 Pro.
The following hardware revisions are supported:
GM1910: China
GM1911: India
GM1913: Europe
GM1917: Global/US Unlocked
Download: https://www.androidfilehost.com/?w=files&flid=294744
guacamole_21_H.04_190416_unlocked.zip
After using it, the phone will be restored to HydrogenOS aka Chinese firmware.
Click to expand...
Click to collapse
guacamole_21_E.08_190515_unlocked.rar
After using it, the phone will be restored to OxygenOS 9.5.4.GM21BA aka European firmware.
Click to expand...
Click to collapse
guacamole_21_O.07_190512_unlocked.zip
After using it, the phone will be restored to OxygenOS 9.5.3.GM21AA aka global firmware.
Click to expand...
Click to collapse
In every case, it is possible to upgrade to latest OxygenOS by using full signed zip from this thread via Local Upgrade.
With the device powered off, hold Volume Up & Volume Down buttons to force it to boot to Qualcomm download mode.
Use the most updated signed driver (2.1.2.2 at this moment) to avoid potential issues..
For detailed procedures, please consult the linked threads above. There is no reason to repeat the same thing again.
Make sure the path of the extracted files doesn't contain any non-English character. The tool isn't unicode aware.
Source:
HydrogenOS package: 人艱不拆 (OnePlus China forum thread), @trollavin & @Some_Random_Username for the help in mirroring
OxygenOS (EU) package: @MrVoshel
OxygenOS (global) package: @Lucifer6
Reserved for future.
Thank you for this!!
Doesn't this leave you with a Chinese modem (limited LTE bands and roaming configs?) and critical partitions? Wouldn't an international or European tool be more suitable considering that Oxygen zips may not overwrite everything? Or is this just a temporary guide with what we have?
LLStarks said:
Doesn't this leave you with a Chinese modem (limited LTE bands and roaming configs?) and critical partitions? Wouldn't an international or European tool be more suitable considering that Oxygen zips may not overwrite everything? Or is this just a temporary guide with what we have?
Click to expand...
Click to collapse
Temp? yes and no, I would say. Better than warranty R&D in days no phone for use.
As far as you can revive the phone from QDL9008 back to HOS/OOS, you now have a chance Again to switch over whatever ROM or OS you want later on.
jkyoho said:
Temp? yes and no, I would say. Better than warranty R&D in days no phone for use.
As far as you can revive the phone from QDL9008 back to HOS/OOS, you now have a chance Again to switch over whatever ROM or OS you want later on.
Click to expand...
Click to collapse
Well, that's the perfect explanation.
:highfive:
Can you turn TMobile to int'l with this ?
HtcOnekid said:
Can you turn TMobile to int'l with this ?
Click to expand...
Click to collapse
What he said
When i start MsmdownloadtoolV4.0.exe it says :
Packet image not exist!
Take out the Chinese characters in the file name and then try
joemossjr said:
Take out the Chinese characters in the file name and then try
Click to expand...
Click to collapse
Yep that's i though, but i finaly looking for EU version. Because i think with OTA upgrade to GMBA EU modem will not contain the good modem right ?
---------- Post added at 12:59 AM ---------- Previous post was at 12:27 AM ----------
failed to install on EU model : param preprocessing and stop at 5 ou 7 sec before flashing. I tryed using anothere patched tool and not working :s
Please help me, I failed pretty hard and bricked my phone.
I rooted my phone with stock recovery using a patched magisk boot image and all went fine.
Today, I deviced to temporarily boot into twrp to check it out, so I booted into fastboot and used "fastboot boot twrp.img"
and booted into system. I was confused and rebooted but now I was stuck in stock recovery. So I completely flashed TWRP
on boot_a and boot_b and into TWRP I rooted my device. But even now I am always bootlooping into TWRP and can't
get my phone to boot into system.
I tried using the unbrick tool but my device won't show up on my computer, even with the driver installed.
I'm screwed, can someone help?
Can I somehow reflash the stock recovery and revert back to my patched boot image?
uniQ191 said:
Please help me, I failed pretty hard and bricked my phone.
I rooted my phone with stock recovery using a patched magisk boot image and all went fine.
Today, I deviced to temporarily boot into twrp to check it out, so I booted into fastboot and used "fastboot boot twrp.img"
and booted into system. I was confused and rebooted but now I was stuck in stock recovery. So I completely flashed TWRP
on boot_a and boot_b and into TWRP I rooted my device. But even now I am always bootlooping into TWRP and can't
get my phone to boot into system.
I tried using the unbrick tool but my device won't show up on my computer, even with the driver installed.
I'm screwed, can someone help?
Can I somehow reflash the stock recovery and revert back to my patched boot image?
Click to expand...
Click to collapse
what is your device OOS 9.5.3/4/5/6 ?
flash the co-responding stock boot.img from twrp with magisk zip together, and see if you can boot
uniQ191 said:
Please help me, I failed pretty hard and bricked my phone.
I rooted my phone with stock recovery using a patched magisk boot image and all went fine.
Today, I deviced to temporarily boot into twrp to check it out, so I booted into fastboot and used "fastboot boot twrp.img"
and booted into system. I was confused and rebooted but now I was stuck in stock recovery. So I completely flashed TWRP
on boot_a and boot_b and into TWRP I rooted my device. But even now I am always bootlooping into TWRP and can't
get my phone to boot into system.
I tried using the unbrick tool but my device won't show up on my computer, even with the driver installed.
I'm screwed, can someone help?
Can I somehow reflash the stock recovery and revert back to my patched boot image?
Click to expand...
Click to collapse
You havn't bricked your phone, just put it in fastboot mode and reupload boot image to the correct slot !
Regards,
thebigtross said:
You havn't bricked your phone, just put it in fastboot mode and reupload boot image to the correct slot !
Regards,
Click to expand...
Click to collapse
Thanks for your replies! I was on OOS 9.5.5 and I tried flashing the twrp/magisk zips but that didn't work either. I also tried applying the stock boot.img to the active slot, but still got the recovery bootloop.
So as my last hope, I wiped all data in recovery mode, rebooted to fastboot and sideloaded the complete stock image from here https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
I reconfigured my phone from scratch, rooted with the patched boot image like before and everythings works now. Guess I will not bother with TWRP any time soon.
Added global and EU packages.
Titokhan said:
Added global and EU packages.
Click to expand...
Click to collapse
Will global work for 1911 (India)
Mr.Crucial said:
Will global work for 1911 (India)
Click to expand...
Click to collapse
Yes, the packages are interchangable.
[/COLOR]
Titokhan said:
Yes, the packages are interchangable.
Click to expand...
Click to collapse
But I think that these packages will not work on T-mobile 1915!
When I reboot into edl mode, it recognizes the "Qualcomm HS-USB QDLoader 9008", but then 10 seconds later, the phone automatically boots the the battery display, which disables edl. The same this happens whether I use the vol up+down and plug in, or `adb reboot edl`.
Edit: "How I learned to stop worrying and risk a brick"
Selecting the right COM and hitting start in MSMtool in that 10 second window kept it in edl mode for the duration of the flash.

Categories

Resources