SM-T700 UK version stock 5.0.2
1. Root using Kingroot 4.5
2. ONLY now !!! install and run Super-Sume
3. Update SuperSu binaries
That's all : you have root, SuperSu and Knox still "O" and Kingroot it's gone...
Would people please post the full build version of the firmware they have success or failure with, so others are aware of which ones work.
has this method been verified by other users?
Share your experience please!
It's brand new...
Verified by myself
Have you maintained root after reboot?
ashyx said:
Already tried it, v4.5 is posted in my kingroot thread, didn't work on lollipop for t805.
Neither did supersu me, binary always fails to update, once it did manage after several tries, but root is lost after reboot.
Supersu me is just the same script as posted in the kingroot thread. Root always lost after reboot.
Have you maintained root after reboot?
Click to expand...
Click to collapse
Just following your thread, messing with Kingroot 4.5 (from your tread) I obtained root.
Also someone there suggesting SuperSume to remove Kingroot.
I use it and that's it
Yes the root it's permanent
stefan.pilsu said:
Just following your thread, messing with Kingroot 4.5 (from your tread) I obtained root.
Also someone there suggesting SuperSume to remove Kingroot.
I use it and that's it
Yes the root it's permanent
Click to expand...
Click to collapse
Can you then install SuperSu or do you need to keep the SuperSume?
Anyone else confirm this method ?
louiscar said:
Can you then install SuperSu or do you need to keep the SuperSume?
Anyone else confirm this method ?
Click to expand...
Click to collapse
Super-Sume install SuperSu
Update binaries and done
I waiting also others to confirm
stefan.pilsu said:
I waiting also others to confirm
Click to expand...
Click to collapse
Ok Thanks for putting this up, if it's reliable it will save a lot time for many.
..guys try install first busy box while with kingo root, then install supersu. update binary. if successful,
..uninstall kingoroot . reboot supersu rules!!!!!!
angelshie said:
..guys try install first busy box while with kingo root, then install supersu. update binary. if successful,
..uninstall kingoroot . reboot supersu rules!!!!!!
Click to expand...
Click to collapse
Super_Sume make all this "work" with one click !
Ok guys, thanks for confirming, Sweet
Thanks for the tip. This worked perfectly. I installed Kingroot 4.5. When Kingroot runs scroll down and press "Try it" and it rooted. I then immediately installed Busybox from the Google Play store and ran the smart installer. After a successful install of Busybox, I then installed Super-Sume from the Play store. I ran Super-Sume and it installed Super SU and removed Kingroot. After that, I opened Super SU and allowed it to update the binary. Rebooted. I checked root with Root Checker app and checked Knox with an app called Knox Status on the Play store. Root is still active and Knox is still at "0". I powered off, then restarted again. Root has stayed.
I did this on a brand new US region SM-T700 pulled straight from the box and updated to Lolilipop from OTA.
System Version:
SM-T700
LRX22G.T700XXU1BOE3
*ROOT WORKING !! SMT-700 OTA 'lollipop'
Confirmed working on Lollipop NEE-T805XXU1BOE3 firmware.
Reflashed back to complete stock then ran Kingroot v4.5, root succeeded first time.
Ran Supersu me to remove Kingroot and install Supersu then updated the su binary.
Rebooted then checked root status. Full root access still available.
No need to install busybox as Supersu me already installs busy box.
Looks like we have a winner, no need to downgrade to Kitkat any more. :good:
Hopefully now T807/707 users can now get root.
Credits go to the devs of Kingroot, Chainfire and Supersu me.
ashyx said:
Confirmed working on Lollipop T805XXU1BOE3 firmware.
Reflashed back to complete stock then ran Kingroot v4.5, root succeeded first time.
Ran Supersu me to remove Kingroot and install Supersu then updated the su binary.
Rebooted then checked root status. Full root access still available.
No need to install busybox as Supersu me already installs busy box.
Looks like we have a winner, no need to downgrade to Kitkat any more. :good:
Hopefully now T807/707 users can now get root.
Credits got to the devs of Kingroot, Chainfire and Supersu me.
Click to expand...
Click to collapse
I've told you ...
ashyx said:
Confirmed working on Lollipop T805XXU1BOE3 firmware.
Reflashed back to complete stock then ran Kingroot v4.5, root succeeded first time.
Ran Supersu me to remove Kingroot and install Supersu then updated the su binary.
Rebooted then checked root status. Full root access still available.
No need to install busybox as Supersu me already installs busy box.
Looks like we have a winner, no need to downgrade to Kitkat any more. :good:
Hopefully now T807/707 users can now get root.
Credits go to the devs of Kingroot, Chainfire and Supersu me.
Click to expand...
Click to collapse
It does not appear to work on T707a with 5.0.2.
Maybe ashyx could help.
What exactly didn't work for you ?
stefan.pilsu said:
I've told you ...
Click to expand...
Click to collapse
Do you think this is likely to work for KitKat ANL1? I already downgraded as part of Ashyx's tutorial to ANF7.
My only reservation to going to Lollipop is that I want to use the Xposed framework which I think is still in it's infancy for 5.x or still not compatible.
So before this my options are to keep the original Kitkat by Flashfire - ANL1 or go directly to Lollipop. For the latter I could just get the OTA and do this method now. But not sure if I go to ANL1 kingroot will work as easily
If not I'll continue in the normal way I guess.
Once you have root with Kingroot install Super Sume and run it.
Kingroot 4.5 from ashyxs tread works for me.
Super-Sume just install busybox, SuperSu and get rid of Kingroot.
Why not use Flashfire to install whatever you want: KK or L ?
06.06.2016
Hey,
I have Note 5 SM-N920C MM 6.0.1
Lost my root today after 4 week of that I using it (apps like "Titanium backup" and "Uninstall" doesn't work)
when you get into SuperSU I get the flowing massage
"There is no SU binary installed, and SuperSU cannot install it. This is a problem! If you just upgraded to Android 5.0 [***ANY ANDROID VERSION***] , you need to manually re-root. [OK]"
I try to install SuperSU from google play again and I run into the exact same situation as before.
Checked it with Root Checker "sorry root access is not properly installed on the device"
Tried to re-root it with Kingo root (for the 1st time) getting "Root Failed"
If you have any ideas what to do I would be happy for your ideas
(I pretty new to it, it's my 1st android device had iPhone 2/4/4s/5 before )
Happened to me today as well. Xposed claimed there is a module update (although the only module I had is lucky patcher, and that wasn't updated). After a reboot, I lost root access and custom recovery...
Happened to me since a week ago... Anyone has any fix available for this?? Please help..
I have same issue
I was trying to re-root:
Flash stock system.img (june security update)
Flash stock boot.img (june security update)
Flash supersu
Flash elementalX
No profit ☹
I’m using:
twrp-2.8.6.0-shamu
ElementalX-N6-3.16
Systemless supersu 2.74 ( on I have 2.65 same issue)
evaldbiz said:
06.06.2016
Hey,
I have Note 5 SM-N920C MM 6.0.1
Lost my root today after 4 week of that I using it (apps like "Titanium backup" and "Uninstall" doesn't work)
when you get into SuperSU I get the flowing massage
"There is no SU binary installed, and SuperSU cannot install it. This is a problem! If you just upgraded to Android 5.0 [***ANY ANDROID VERSION***] , you need to manually re-root. [OK]"
I try to install SuperSU from google play again and I run into the exact same situation as before.
Checked it with Root Checker "sorry root access is not properly installed on the device"
Tried to re-root it with Kingo root (for the 1st time) getting "Root Failed"
If you have any ideas what to do I would be happy for your ideas
(I pretty new to it, it's my 1st android device had iPhone 2/4/4s/5 before )
Click to expand...
Click to collapse
You need to root
Frist flash recovery custom example TWRP next flash file zip application su 2.74-2 in TWRP ...
This happened to me too. I followed the procedure New Root Method For 5.1.1 w/o custom kernel. It worked for 3 weeks, and then without warning root was gone. Exactly same behavior as OP.
I Flashed SuperSU again from TWRP recovery, and have root again. But I want to understand why this happened so I can prevent it. I don't get OTA updates, and automatic updates are disabled. What could "break" the systemless root without causing a request I would have to allow? I have three applications enabled for root in SuperSU Pro: Adblock Plus, EX FIle Explorer Pro, and Titanium Backup.
Hey,
I have the same pb with GN4 6.01
i fix it with super su 2.68 with twrp-3.0.2-0-trltexx.img, clean dalvik cache et cache
reboot
open su and go update binarie on google play. (update 2.76 stable)
Test du su avec ESexplorer
It 's work
evaldbiz said:
06.06.2016
I have Note 5 SM-N920C MM 6.0.1
Lost my root today after 4 week of that I using it (apps like "Titanium backup" and "Uninstall" doesn't work)
when you get into SuperSU I get the flowing massage
"There is no SU binary installed, and SuperSU cannot install it. This is a problem! If you just upgraded to Android 5.0 [***ANY ANDROID VERSION***] , you need to manually re-root. [OK]"
I try to install SuperSU from google play again and I run into the exact same situation as before.
Checked it with Root Checker "sorry root access is not properly installed on the device"
Tried to re-root it with Kingo root (for the 1st time) getting "Root Failed"
If you have any ideas what to do I would be happy for your ideas
(I pretty new to it, it's my 1st android device had iPhone 2/4/4s/5 before )
Click to expand...
Click to collapse
I lost root as well! Im on note 5 6.0.1. I had been doing fine until I flashed the nexus launcher. The launcher flashed properly but lost root after that. Ive tried to re-root again and I cant because 1. I lost TWRP! 2. My pc wont read my phone even though I installed and unistalled the samsung drivers over and over. When I install the drivers it initially works but once I turn my phone off it wont work again! Anyone know how to fix it!?
SuperSU does not show any prompt, leaving the application needing root stuck on waiting.
Using version 2.78 SR2 (and tried and resulted the same on older versions)
Selinux is set to Enforcing
Device is running EMUI 3.0 Lite, Android 4.4.2
Logcat attached below.
techyzen101 said:
SuperSU does not show any prompt, leaving the application needing root stuck on waiting.
Using version 2.78 SR2 (and tried and resulted the same on older versions)
Selinux is set to Enforcing
Device is running EMUI 3.0 Lite, Android 4.4.2
Click to expand...
Click to collapse
Hi,
I have exactly the same problem with a Huawei Y550 stock ROM (Android 4.4.4, EMUI 2.3). I tested SuperSU 2.79 and 2.46. Did you find a solution to this problem ?
One solution - but be careful and use your head with this one - is to set the SuperSU App to automatically allow root. This way, even there is no prompt, the app you want to run is granted root access.
This should not be a permanent setting, i.e. don't leave SuperSU setting to automatically grant root access.
Hello if some can help i will be very glad. Before 2 mounth i buy the Honor 5c/7 lite. Before 2 week i sayd to my self f*** the warranty i will root and play with the software , i have some experience in rooting and rom installation and changes from my old phones but i never try to do a own rom and app , so i need help for my problem. So the problem is the otg support that we honor ussers have when we are rooted. I install 7.0 software and i succesly root it i install the xml files by TRWP and the apk , but for the app u need superSu version 2.65 and on 7.0 u can root maybe only with 2.79 and my question is if someone can manage the app to compile with 2.79 su or can tell me if i can root with 2.65 cuz most apps used old su versions.
I've installed Magisk 17.3 and the Manager app says everything is ok. But RootChecker says that root access is not properly installed. Is it true that Huawei is locking root access on their phones. Is there a workaround?
Thx.
NB: Is there a requirement to install a newer version of TWRP? I've got 3.2.1-0 installed on my AL10.
You have twrp on your device so that means your bootloader is already unlocked... So it's magisk acting up maybe you need a clean install of magisk or you should see if your phone roots with supersu if it does that means you just have a faulty installation of magisk it happens
[emoji3434] For Those I Love I Shall Sacrifice [emoji3434]
Ha ha. I re-installed Magisk v17.1 and RootChecker says I have root access. I had installed 17.3 before with no luck. Weird.
But thanks for the response.