Database Develop

Unable to find device in RSDLite

Hi guys, I'm using Motorola Milestone and my bootloader is 90.78. I opened RSDLite and plug in the phone in bootloader mode but my RSDLite is unable to detect my device.
I have already installed the motorola drivers. Anyone has any ideas?

bryant_16 said:
Hi guys, I'm using Motorola Milestone and my bootloader is 90.78. I opened RSDLite and plug in the phone in bootloader mode but my RSDLite is unable to detect my device.
I have already installed the motorola drivers. Anyone has any ideas?
Click to expand...
Click to collapse
Same issue here. I have bootloader 90.74. On my Windows 7 there's no way...
Drivers 4.1 and 4.6 tested...but no way...

Anyone has any ideas about this issue?

Weird problem :s Works fine on my Win 7 VM. You could maybe try to uninstall and reinstall the driver :/

Some people have issues with RSDLite on Windows 7 64 bits.
I used to have the same problem and finally I had to install it on my netbook which has W7 32 bits and it worked fine.
Did you managed to install it in an other computer ?

The latest RSDLite versions didn't worked for either but version 4.5.3 works good under Windows 7 for me!

I found a solution
Like the rest, I too had the same problem. Then I found out how to make it work by accident.
I am using RSDlite version 4.5.7 on Windows 7 (32-bit version).
This is what you must do.
Step 1:
Download Open Recovery Version 1.46 for Milestone from http://www.modmymobile.com/forums/downloads.php?do=file&id=28089
Step 2:
It is a rar file, so use any free software to extract out the contents of this OpenRecovery_v1_46_SHOLS.rar file to a new folder on your desktop.
After u have extracted it, look for a file called vulnerable_recovery.sbf. Copy out this vulnerable_recovery.sbf file to somewhere on your pc for example to the root of your C drive on your PC.
Step 3:
Download from this script to disable the recovery check for signed recovery menu (so that we can apply update.zip later) from
http://modmymobile.com/forums/attac...le-recovery-disable_recovery_check_by_ota.zip.
Unzip the file and there should be a file called Disable_recovery_check_by_OTA.sh
Step 4:
Copy the Disable_recovery_check_by_OTA.sh file to a sub folder called scripts that is within the OpenRecovery folder (which we have already extracted earlier) (eg. OpenRecovery\scripts).
Step 5:
Boot up the phone as per normal and then connect the phone to PC via USB cable
Step 6:
Change the USB Connection to Memory Card Accessl
Step 7:
Go to the desktop of your PC and open up the folder where the contents of the extracted OpenRecovery_v1_46_SHOLS.rar file is. You should then copy the update.zip to the root of your phone's SD card (eg. SDcard\update.zip).
Also copy the whole OpenRecovery folder also to the root level of your SD card (eg. SDcard\OpenRecovery)
Step 8:
Change the USB Connection to Portal & Tool. This is the trick that will allow RSDLite to detect your phone.
Step 9:
Launch RSDLite ver.4.5.7
Step 10:
It will take a few seconds for your phone to appear in the device list of RSDLite
Step 11:
Click on the "..." button and locate and open the vulnerable_recovery.sbf file which we have extracted earlier and had copied out to somewhere (eg. root of C drive).
Step 12:
Click on the "Start" button.
Step 13:
Immediately you would see something in the status progress of RSDlite. RSDlite will switch your phone to the Bootloader mode by itself.
Step 14: - Very Important Step
Pay attention to the status of the Bootloader on your phone. Halfway thru the progress of flashing the vulnerable_recovery.sbf, RSDlite will initiate a reboot of your phone.
When that happens, you must prevent the phone from rebooting into the normal Android mode and get it to boot into the Bootloader mode by quickly pressing & holding up on your D-pad in horizontal (landscape) position.
I would suggest that b4 RSDlite initiate the reboot, you should be prepared for it by sliding out the keyboard first and hold it in the horizontal (landscape) position and get ready to press up on the D-Pad.
by quickly turning your phone to the horizontal position (landscape) and press and hold up on the D-Pad of your phone. Hold the up key of your D-pad for about 3 to 4 seconds before release it and it should be now back in the bootloader mode.
Do not do anything yet. You will know when the flashing of the vulnerable_recovery.sbf is completed and successful when the result in RSDLite device list window says "PASS".
Step 15: - Also very important step
Once the flashing of the vulnerable_recovery.sbf is complete (after you see "PASS" in RSDlite), you may close RSDlite and then unplug the phone from the USB cable.
The phone is still in the bootloader mode. Now be prepared to boot into the recovery mode. This is very important. If you fail to boot into the recovery mode then you will have to repeat from Step 8
The technique that I use on my Motorola Milestone to boot into the recovery mode is by using the 3 button technique. I press the "x" key + power button + camera button together at the same time and hold it until the recovery mode icon appears which is a an exclamation mark within a triangle.
Step 16:
While in the recovery mode, slide the keyboard back in. Then press and hold the volume up button first and then press the camera button once and when you see the recovery menu you can quickly release the volume up button.
Step 17:
Slide the keyboard out. Use the D-pad to navigate. If you are holding the phone in vertical position, then to navigate up and down the recovery menu, just press up or down on the D-pad. To confirm your selection, press down on the middle of your D-Pad.
Using your D-Pad, scroll down to the part it says "apply sdcard:update.zip" and press the middle of your D-Pad to select it.
You should see something packages being downloaded to your phone which is part of the installation process of the Motorola Milestone Open Recovery Menu which is not the stock Recovery Menu.
Step 18:
Once you are in the Motorola Milestone Open Recovery Menu, scroll down to the option that says "Run Script". Select that option.
Step 19:
Then you should be able to see a list of scripts and one of them should be "Disable_recovery_check_by_OTA.sh". Select that script.
Step 20:
Once that "Disable_recovery_check_by_OTA.sh" has been applied, the phone will no longer check for signed recovery menus like this Motorola Milestone Open Recovery Menu when ever you go into the stock recovery menu to "apply sdcard:update.zip". This means you can install different types of "Open Recovery Menu" for different custom roms for Motorola Milestone.
Besides using this Motorola Milestone Open Recovery Menu, I have also tried the following 2 "Open Recovery Menu" on my Milestone:
1) Androidiani OpenRecovery 3.3 - http://forum.xda-developers.com/showthread.php?t=796679
2) G.O.T OpenRecovery (for installing G.O.T custom FROYO rom) - http://groupoften.wordpress.com/g-o-t-s-openrecovery/
Important Note:
Before you start to install custom roms please do a Nandroid back up of your phone in case something goes wrong during the installation of the custom rom, you can restore your phone back to stock rom.
The Nandroid back up and restore option is available within all 3 "Open Recovery Menu" mentioned above.

I have Windows 7 Ultimate 64-bit and I use Motorola USB Drivers 4.7.1 and RSD Lite 4.9. So it would be good to download these versions, which are the latest. If this wont work, do a factory reset on your Milestone.

Flashing optimus to Eclair and uplevel to r00t

First, Im sorry if my English is poor.
If your Optimus still using a Donut Version please read this article,
before upgrade your phone,please check phone and computer connection.
(Windows XP Recommended)
step 1.
Download KDZ_FW_UPD.exe
download here : megaupload[dot]com/?d=B99JDF9I
Step 2.
Download ROM 2.1 Optimus with Fastboot.
download here : kitaupload[dot]com/download.php?file=827out.kdz
step 3.
Download Fastboot mode
download here : kitaupload[dot]com/download.php?file=577system.rar
step 4.
-Extract KDZ_FW_UPD and open the folder.
-Find Windows Enabler.exe and open
-see in the systray and click icon a Windows Enabler until Icon change to ON.
-Open KDZ_FW_UPD.exe
-In the KDZ Form, Click 1st Drop Down menu, and select "3GQCT"
-Click Browse File Button, and select file "out.kdz"
-And click "??????????????????" button
*Please wait a moment until your phone is restart. After startup the phone, you must close a KDZ_FW_UPD.exe.
*Your phone is update finish when you see "Log finished" in history panel.
step 5.
-after upgrade you must plug out your phone from computer and reboot your phone.
-when phone is off, you must press Volume Up + search Button + Power button, hold until show "fastboot mode" in your phone.
-after your phone in Fastboot mode, please plug in your handphone to PC. (please verify Android SDK already install)
-Please extract a fastboot file in SDK/Tools folder.
-In SDK folder,please check a Fastboot.exe
if you found you must open CMD and type like this : "fastboot.exe flash system system.img"
-Wait a moment
-if finish, please type a "fastboot reboot"
-when your phone already back from reboot, please check superuser.apk in your phone.
-EOF-

Here is good methode of root, but i think it's easier/faster to use scripts from Modaco.

[GUIDES/TOOLS]Making Developing/Flashing/Returning to Stock Easier

1. Recovery Manager
This is a flashing tool that will let you install:
Stock Recovery
ClockworkMod Recovery
Touch ClockworkMod Recovery
Requirement:
You'll need to have the LG Thrill / Optimus 3D
You'll need to be rooted.
Superuser and SU have to be updated to the latest app and binary
Update Superuser in the market
Open Superuser app and go to the options
Scroll to the bottom and click "Su binary"
DOWNLOAD LINK: Recovery Manager - 18 MB
How To Use:
Extract the files with WinRar or 7zip
Launch "Recovery Manager.bat"
Make sure your phone is in "USB Debugging Mode" and is plugged in
Choose your option
Wait for the screen to refresh
Boot into recovery to verify it was flashed successfully
--------------------------------------------------------------------------------------------------------------------------------------------------------​
2. RETURNING TO STOCK
This will return you to (semi)stock
Requirement:
You'll need to have the LG Thrill
You'll need to be rooted.
Superuser and SU have to be updated to the latest app and binary
Update Superuser in the market
Open Superuser app and go to the options
Scroll to the bottom and click "Su binary"
Have Recovery Manager download
DOWNLOAD LINK: Stock Thrill 4G : AT&T FroYo 2.2 - 362 MB
DOWNLOAD LINK: Stock Thrill 4G : AT&T FroYo 2.2 - 406 MB
How To Flash:
Copy the "update-thrill-stock-rom-rooted.zip" to the sdcard
Boot into ClockworkMod that was installed with Recovery Manager
Select "install zip from sdcard"
Select "choose zip from sdcard" if it is on the EXTERNAL sdcard
Select "choose zip from internal sdcard" if it is on the INTERNAL sdcard
Locate and select the "update-thrill-stock-rom-rooted.zip"
Select "yes"
Once it is installed, wipe data on the phone and reboot!
--------------------------------------------------------------------------------------------------------------------------------------------------------​
3. LG Flash Tool
This is the flashing tool that will let you install:
Any .kdz firmware. Ex. V10C_00.kdz
KDZ Files Available:
FROYO
V10C_00.kdz
V10D_00.kdz
V10E_00.kdz
V10K_00.kdz
GINGERBREAD
V20A_00.kdz
V20B_00.kdz
V20C_00.kdz
V20E_00.kdz
V20F_00.kdz
V20P_00.kdz - Official AT&T Gingerbread
V21A_00.kdz
V21B_00.kdz
V21D_00.kdz
V21E_00.kdz
Requirements:
You'll need to have the LG Thrill / Optimus 3D
All your data backed up
All LG Drivers Removed
DOWNLOAD LINK: LG Flash Package - 50 MB
How To Use:
Step 1
Download the .kdz file you want to flash
Extract the files with WinRar or 7zip
Uninstall all LG drivers
Restart computer
Step 2
In the "Drivers" folder, install the "LGUnitedMobileDriver_S4981MAN36AP22_ML_WHQL_Ver_3.6.exe" file
In the "Software" folder, install the "B2CAppSetup.exe" file
In the "SERVER" folder, launch the "shttp3.exe" file
An error may or may not pop up. Just click OK
Check the "I agree with this license, and I accept all items."
Check the "Update entry in main menu."
Check the "Add to startup."
Make the password "admin"
Click "Install"
Launch the "Small HTTP server" from the Start Menu
MINIMIZE the popup. If you close it, the server will quit.
On the TaskBar, a new icon should appear. Right click the icon and go to "Settings"
Select the "HTTP" tab and change the "Port" to "9002"
Click "OK" in the top right corner
Step 3
Navigate to "C:\shttps" on the hard drive
Copy the contents of "WWW Folder" into the "C:\shttps\www" directory
Navigate to "C:\Windows\system32\drivers\etc" on the hard drive
Copy the "hosts" file in "C:\Windows\system32\drivers\etc" to the "ORIG" folder in the LG Flash Package
Delete the "hosts" file from "C:\Windows\system32\drivers\etc"
Copy the "hosts" file from the "MOD" folder in the LG Flash Package to "C:\Windows\system32\drivers\etc"
Step 4
In the "FLASHING" folder, launch "Windows Enabler.exe"
A new icon should appear on the TaskBar. Click the icon to turn it to the "ON" position
In the "FLASHING" folder, install the "msxml.msi" file
Step 5
Open Device Manager
Windows XP - Right Click "My Computer", click the "Hardware" tab, and select "Device Manager"
Windows Vista/7 - In the Start Menu search bar, type "Device Manager" and select it at the top
Unplug your phone
Take out the battery
Step 6
Check Device Manager for the current active "COM Ports"
Boot into DOWNLOAD MODE
Plug the phone into the computer without the battery inserted
Hold [VOL UP + POWER]
Put the battery in and wait until it vibrates or for 3 seconds
Check Device Manager for a NEW "COM Port"
If there is not a new "COM Port", restart Step 5
Step 7
Launch the "UpTestEX_mod2_marwin.exe" file
Change the product type located under the LG Electronics logo to "3GQCT"
Change the PhoneMode to "EMERGENCY"
Navigate to your .kdz file in the "Select kdz file" box
Click "Normal web upgrade test" at the bottom
Click "Upgrade Start" on the pop up screen
On the "Select Country & Language" box, click "Clear phone Software udpate Registry"
Change "Country" to "Different Country"
Change "Language" to your language
Click OK
Your phone is now flashing. DO NOT TOUCH THE PHONE AT ALL. DO NOT UNPLUG THE PHONE.
Step 8 : Varies
If your phone boots properly, ignore this.
Part 1: Booting into recovery
If your phone does not boot and you are stuck in a boot loop:
Boot into RECVOERY MODE
Hold [VOL DOWN + 3D]
Press the POWER button until the phone vibrates
Part 2: Wiping data in recovery
Use VOL DOWN to navigate to "wipe data/factory reset"
Press the "3D" to select it
Use VOL DOWN to navigate to "Yes"
Press the "3D" to select it
Restart the phone
Step 9 : Optional
Root using one of the three SuperOneClick versions in the LG Flash Package folder
Install ClockworkMod or Touch ClockworkMod Recovery with Recovery Manager
--------------------------------------------------------------------------------------------------------------------------------------------------------​
4. Megatron Root
This is a root tool by Dan Rosenberg that will let you root:
V20x Firmware
Any other Gingerbread Firmware that SuperOneClick can't root
Requirements:
You'll need to have the LG Thrill / Optimus 3D
LG P920 Drivers installed
DOWNLOAD LINK: Megatron Root - 1 MB
How To Use:
Extract the files with WinRar or 7zip
Make sure your phone is in "USB Debugging Mode" and is plugged in
Launch "run.bat"
Wait for the phone to reboot
Verify that root is enabled
ROOT DONE!
--------------------------------------------------------------------------------------------------------------------------------------------------------​
5. Entering APNS
This example is for AT&T "4G" HSPA+ APNs
Getting To The APNs
Go to the "Settings" app
Select "Wireless & networks"
Select "Mobile networks"
Select "Access Point Names"
Setting Up The APNs
Press the Menu button
Select "New APN"
Select "Name"
Change it to "AT&T HSPA+"
Select "Ok"
Select "APN"
Change it to "phone"
Select "Ok"
Select "MMSC"
Change it to "http://mmsc.cingular.com"
Select "Ok"
Select "MMS Proxy"
Change it to "wireless.cingular.com"
Select "Ok"
Select "MMS Port"
Change it to "80"
Select "Ok"
Select "MCC"
Change it to "310"
Select "Ok"
Select "MNC"
Change it to "410"
Select "Ok"
APNs SET!
--------------------------------------------------------------------------------------------------------------------------------------------------------​
6. Booting into and Navigating Recovery Mode
Booting into Stock Android Recovery
Boot into RECVOERY MODE
Hold [VOL DOWN + 3D]
Press the POWER button until the phone vibrates
Using Stock Android Recovery
VOL + and VOL - is to move up and down
Press the 3D button to select an option
Booting into ClockworkMod Recovery
Boot into RECVOERY MODE
Hold [VOL DOWN + 3D]
Press the POWER button until the phone vibrates
Alternatively for ClockworkMod:
Go to Settings
Go to Privacy
Choose Factory Reset
It will boot into ClockworkMod.
Using Stock Android Recovery
VOL + and VOL - is to move up and down
Press the POWER button to select an option

i downloaded and then opened recovery manager. bat and i pressed 2 and it says "the system cannot find the path specified! help

I will take a look at it.

all right thanks and just to let you know i had usb debugging on and it was plugged in.

soccerdude612 said:
all right thanks and just to let you know i had usb debugging on and it was plugged in.
Click to expand...
Click to collapse
Go ahead and redownload.

all right ill do that right now
---------- Post added at 07:20 AM ---------- Previous post was at 07:09 AM ----------
should i just redownload thrill recovery manager?

soccerdude612 said:
all right ill do that right now
---------- Post added at 07:20 AM ---------- Previous post was at 07:09 AM ----------
should i just redownload thrill recovery manager?
Click to expand...
Click to collapse
Yes. Redownload it.

whenever i try to run B2CAppSetup.exe. it tells me that i need to connect to the internet and hit continue, i am connected and when i hit continue it just pops back up saying the same thing any ideas? p.s. i don't have a firewall or virus protection or anything on so im not sure what it is
ALSO: where is the msxml.msi file located i can't find it in the thrill flash package

riceje7 said:
whenever i try to run B2CAppSetup.exe. it tells me that i need to connect to the internet and hit continue, i am connected and when i hit continue it just pops back up saying the same thing any ideas? p.s. i don't have a firewall or virus protection or anything on so im not sure what it is
Click to expand...
Click to collapse
Please bear with me. I'm at work and I don't have my laptop to verify every exact step. I'm going off memorized information.
Did you do Steps 3 & 4?
EDIT: msxml.msi is located in the FLASHING folder.

no worries mate, just trying to help work out the kinks. I'll try starting over and see if anything changes.

riceje7 said:
no worries mate, just trying to help work out the kinks. I'll try starting over and see if anything changes.
Click to expand...
Click to collapse
Thanks!
Also, has anyone tried the Recovery Manager yet?
I don't know if it just works for me.

im gonna try it its just that my friend accidentally took my phone with him and he is on his way to return it i will check if it works. and what version of cam do you have?

soccerdude612 said:
im gonna try it its just that my friend accidentally took my phone with him and he is on his way to return it i will check if it works. and what version of cam do you have?
Click to expand...
Click to collapse
If I remember correctly, it's 5.0.2.0.
The touch version is 5.8.1.5.

allright and with one would you recommend installing? you are the genius here lol

soccerdude612 said:
allright and with one would you recommend installing? you are the genius here lol
Click to expand...
Click to collapse
Personally, I don't use the Touch Recovery. It takes longer for me. Lol
I'd use the regular one.

all right that sounds like an honest recommendation (<-- big word) I'm so eager to try this out I'm just waiting for my friend to arrive :/

soccerdude612 said:
all right that sounds like an honest recommendation (<-- big word) I'm so eager to try this out I'm just waiting for my friend to arrive :/
Click to expand...
Click to collapse
Also, if it's not much of a bother, can you try the LG Flash Package as well?
Use V20B_00.kdz and see if it's rootable?

no no bother at all the only problem is lol i don't know what that is i already have it downloaded on my desktop. maybe if you could explain what that is for sure i would do it

Basically it's all the files needed to flash the phone.
There's a step by step guide in the first post. I feel like I'm missing something though as another user got an error with the internet connection...
It you get an error, you don't put your phone in danger. It just won't flash anything.

wait what is it supposed to be flashing just curious? a rom? or what?

How to root SM-J337P

Prerequisites:
- Samsung USB Drivers
- Patched Odin flashing tool. v. 1.13 or later. (Mine is v3.13.1_3B_PatcheD) (You might not need the patched one. It's just what I happened to use.) You do indeed need the patched one.
- Stock firmware img (To find version: Settings > About phone > Software version)
1. Activate developer mode.
- Settings > About Phone > Software Information
- Click "Build Number" repeatedly until it says "Congratulations! You are a developer!"
2. Enable USB Debugging and authorize computer.
- Settings > Developer Options > USB Debugging
3. Disable screen lock: Settings > Lock Screen > Screen lock type > None
4. Remove any Google or Samsung accounts: Settings > Accounts and backup > Accounts
5. Unlock boot loader WARNING: THIS WILL ERASE YOUR DATA AND RESET THE DEVICE
- Settings > Developer Options > OEM Unlocking
6. Copy the stock farmware img to your phone. You want the file that starts with "AP"
7. Install Magisk Manager by going to the magisk manager website on your phone and hitting "Download Magisk Manager" button and installing the app. The first time you open it, it will need to do additional setup and reboot your device.
8. Open Magisk Manager and select "Install" next to "Magisk." Click Install again, and then click "Select and Patch a File"
9. Select the firmware img you just copied to the phone.
10. Wait for process to complete. (Writing: system.img.lz4 takes a minute)
11. When Magisk Manager says "All done!" close it.
12. Copy the file called "magisk_patched.tar" from your phone to your computer. It should be found in your phone's internal memory "Download" folder.
13. Turn off the phone
14. Open Odin on PC
15. Boot phone into Odin mode: With the phone powered off, press and hold Vol-, Home, and Power until the blue warning screen appears, and then press Vol+ to enter Odin mode.
16. Your phone should appear in Odin on your PC
17. Click the AP button and select the "magisk_patched.tar" file.
18. Click "Start" and then DON'T TOUCH ANYTHING!
19. When the process is complete, a boc in Odin should say "PASS!" and be green. Your phone will reboot. (It will take longer than normal.)
20. Close Odin
21. Initial phone setup. Blah blah...
22. After initial setup, you may get a notification on your phone warning you of unauthorized changes. (Duh.) Just select it and hit cancel.
23. Install Magisk Manager on your phone again (repeat step 6)
24. After a reboot, open Magisk Manager again and it should say "Magisk is up to date."
You are done! Enjoy root access!

One UI 3.0 beta released for Galaxy Z Fold2 5G (Korean only)

One UI 3.0 stable has been released for Galaxy Z Fold2! You may check for updates in your Settings. If it's not available yet in your region, please check the following steps:
Video tutorial:
1. Download and extract both Frija and Odin.
2. Launch Frija.
3. Check the "Auto" button. Write your device's Model Number and CSC
(Your model number is at Settings, then About phone).
4. Click on "Check Update".
5. Click on "Download" and choose a folder to save the firmware.
6. After the download is complete, extract the firmware .zip.
7. Launch Odin.
8. Click the "BL" button and select the file that starts with "BL_...".
9. Click the "AP" button and select the file that starts with "AP_...".
10. Click the "CP" button and select the file that starts with "CP_...".
11. Click the "CSC" button and select the file that starts with "HOME_CSC_..." (Selecting CSC_... will wipe your data!).
12. Turn off your phone.
13. Boot into Download Mode by holding both Volume Up + Volume Down buttons and then connecting it to your PC.
14. After booting into Download Mode, press the Volume Up button to continue.
15. Back to Odin, click "Start".
16. The flashing process will be over when "PASS" is shown in Odin and your phone reboots. You may close Odin and disconnect the phone from your PC then.
17. Congrats! You have successfully flashed the latest update to your device.
18. After your phone is on, turn it off again.
19. Boot into Recovery Mode by connecting to your PC and holding Volume Up + Power Button (+ Bixby Button).
20. Navigating with the Volume Buttons and selecting with the Power Button, go to "Wipe cache partition".
21. Select "Yes".
22. Select "Reboot system now".
Links:
Odin 3 by Samsung:
Index of /samsung-tools/
Frija by @invmini :
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
CSCs Cheat Sheet:
List of Samsung Galaxy CSC Country Specific Product code and region they belong to
List of CSC Country Specific code for Samsung Galaxy & various countries, regions, network carriers, model numbers, variants phone belong to.
www.androidsage.com
---- BEFORE STABLE UPDATE ----
One UI 3.0 beta has been released for Galaxy Z Fold2 5G.
If you are part of the supported regions, you can grab the update link and share it here (for each update).
These are the steps I borrowed from @AhmedMomen 's S10 thread.
How to capture the update.zip file to share with other people:
1. Download HTTP canary app from Play Store.
2. Open HTTP Canary app.
3. Start the update by pressing "Download". Don't pause it!
4. Go back to Canary app and start it. It will grab the link for you.
5. Please share the link and your model number here!
As for how to sideload the update.zip file, I have explained it step-by-step here:
ADB Method:
1. Download and install adb.
2. Connect your phone to your PC.
3. Download the update file where you have installed adb Platform Tools.
4. Rename the file (including the extension) to "update.zip". Click "Yes" on the prompt.
5. Open your terminal of choice.
6. Type "adb reboot recovery" and press ENTER on your keyboard. Wait for your phone to reboot to recovery mode.
7. Navigating with the volume buttons and selecting with the power button, go to "Apply update via ADB".
8. Back to the terminal on your PC type "adb sideload update.zip". (NOTE: If it says that device is not connected, just remove and put the USB cable back until it works).
9. The update is being installed. It will be completed when the phone boots up. You may use your phone normally after.
10. Report any bugs on the Samsung Members app! https://www.samsung.com/global/galaxy/apps/samsung-members/
SD Card Method:
1. Search for an update file. You can usually find one in XDA Forums.
2. Check if you have the right build and open the right link.
3. Download the update file (.bin extension).
4. Move the update file to your SD Card. (NOTE: If you are getting errors, back up the stuff of your SD Card and format it from your Galaxy phone.)
5. Rename the .bin file (including the extension) to "update.zip". Click "Change" on the prompt.
6. Reboot to Recovery Mode, by connecting your phone to another device (such as your earphones) and holding the Volume Up + Power (+ Bixby) buttons.
7. Navigating with the volume buttons and selecting with the power button, go to "Apply update via SD Card".
8. Navigate to and select "update.zip".
9. The update will start installing. It will be completed when the phone boots up. You may use your phone normally after.
10. Report any bugs on the Samsung Members app! https://www.samsung.com/global/galaxy/apps/samsung-members/
Thank you for your support and I hope I helped you!

I don't think it has been released anywhere except Korea, it's not even showing in Samsung Members for us lol.. Misleading title...

megaghostgamer said:
I don't think it has been released anywhere except Korea, it's not even showing in Samsung Members for us lol.. Misleading title...
Click to expand...
Click to collapse
Sorry about that. I updated the title!

Update the stable updates out in Germany

cooldude20000 said:
Update the stable updates out in Germany
Click to expand...
Click to collapse
Thank you for the information! I updated the main post.

Hi I have the Korean Variant KT can I just use KOO variant to flash it