Database Develop

[Resurrection Remix] [Unofficial] [2018-08-19] Treble [Discontinued moved to PIE]

LAST PERSONALLY Verified as working and "stable"*: GAPPS, 8/19 GAPPS
First and foremost, I'm simply compiling this for the OnePlus 6 and am making some small tweaks to include Opengapps and not only Go Apps in the builds.
The parent for this by phhusson can be found at [Resurrection Remix] [Unofficial] [2018-05-19] Phh-Treble
Next the most important information where to get the most current build of the ROM: Google Drive
For now I suggest the version ending in -go such as: 'rr_6_1_180616_system-arm64-ab-go.img.xz' as the '-gapp' is in development, I expect a number of builds over the next few days as I finally the build scripts and then the rate to tapper off to every two weeks or as there are changes that seem to warrant it, I'm not building nightly for no reason, as RR 6.1 is reasonable stable at this time.
Note: Attached (build.sh) is the build script currently being used, it is a work in progress. and will be updated in case you more regular builds. You will need 12GB of Ram Ubuntu 16.04+ (I'm using 18.04 now, but I started with 16.04) and at least 360GB (SSD recommended) to build, and upto 6 hours for the initial run and then 2 for ever additional run.
Many thanks to phhusson for allowing me to post this based off of his work.
Changes, when I have something to report. Not all build will:
The 7/7 build includes a number of patches recommended by DocRambone.
Overlay support to force Apps fullscreen, Under Display->Advanced
Some cleanups to the UI for the round corners
Better LED support
The 7/8 build is the same as 7/7, but includes July security patches, I built it in order to match the official release.
The 7/24 build is again to match the official release
The 8/19 build is again to match the official release, note regression in status bar height I'm looking into.
Second post: will have details on what is working and not
Third Post: will have full instructions on installation, backup restore based on my experiences
* Stable is relative, for me if I consider it usable from day to day it is stable.

As of 8/11/2018
In the GAPPS version
Working:
Fingerprint
Camera (Front and Back) + Flash (Also got the OnePlus Camera working*)
Speaker
Wifi (Some cut outs seen, this is not unique to this ROM and is dependent on the access port some are worse than others, no clue why)
Bluetooth
GPS
Brightness
Slider for Notifications as of 6/18 build
Mobile Data/Voice (tested dual SIMM is working)
Google Apps
Root (using magisk 16.3), told but have not personally tested that 16.4 without changes works as well
Ambient (works serious effect on battery see next post)
Full Screen Aspect Ratio Display->Advanced 7/07/2018 build+
More fully functional LED Improved for at least mounting USB sticks in 7/7 build
USB Host - Fixed for at least mounting USB sticks in 7/24 build
Bluetooth Phone audio is on the local headset. - Fixed in 7/24 build
Seems working NFC working 5.1.11 Vendor and Boot, not working with previous to 5.1.9 Vendor and Boot I have nothing to connect to to fully test
Not Working:
The Notch hides content (need to wait for P)
Unknown:
Camera Quality: I do little with the camera and am no photographer, so I can say nothing about quality, only it installed and took pictures
VaSU# said:
volte kinda works you can receive messages and calls and can send messages but cant call "out"
Click to expand...
Click to collapse
Please let me know if anything is missing, or needs to be added

Instructions to flash, backup ...
WARNING: With 5.1.8 I had no WIFI, so I suggest sticking to 5.1.6 to 5.1.7 FOR THE MOMENT
Instructions to flash, backup ...
Total time required about 90 minutes
Pre-Reqs:
First and foremost:
Start with at least 5.1.6 (or greater, as of writing 5.1.7 was the lastest), there are Treble fixes in 5.1.6 we need.
Second
verify you have a good USB cable (the Red one shipped with the phone is best)
Three
download the oneplus drivers and abd
- USB Drivers: OnePlus 6 USB Drivers for Windows
- ADB/Fastboot: ADB/Fastboot latest mini
Install both to your local system
Four
Download the latest TWRP (get both the img and zip files)
TWRP for OnePlus 6
Five
Download the files(Treble OP6 Files 5.1.6) from:
GUIDE] How to flash Treble roms on OnePlus 6
Extract and keep: vbmeta.img (if you are on 5.1.X where is the boot version you can keep the boot.img as well, if not discard).
Six
Download the lastest Oxygen OS ZIP and bootloader from:
[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates
As of writing this is:
5.1.6 full image: OnePlus6Oxygen_22_OTA_010_all_1806070151_ad8b19ed516e78.zip
5.1.6 boot: OnePlus6Oxygen_22_OTA_010_all_1806070151_boot.img
Seven
Download Device ID:
Device+ID APK
Eight
Download Magisk for Treble:
Magisk modified for treble
Since as of 6/2018 the default magisk does not support Treble we need a special version I suggest: Magisk-v16.3-factory-faizauthar12-20180406.zip as teh latest I could find with support.
Nine
Recommended download fastboot installable 5.1.6 (or latest build):
[ROM][STOCK][FASTBOOT][OP6] Stock Fastboot ROMs for OnePlus 6
Ten
Include Overlay/Ambient Display.
Download APK at: [Overlay] Enable Night Light, Auto-Brightness, Ambient Display & more on Treble ROM
Eleven
OnePlus Camera:
OnePlus Camera APK's
Finally
Download RR 6.0 for Treble compiled after 7/08/2018:
Either download the gapps or go version (gapps is still a work in progress when I wrote this)
ROMs Google Drive
Getting Ready:
WARNING: you will loss all data on your phone, backup anything you want or need, first.
Make sure you can get to fastboot (enable "Advanced Reboot" in developers options and make sure that you can enter on a reboot by pressing volume-down and power at the same time)
Make sure you are on 5.1.6+ (5.1.6 was the latest firmware upon writing this)
Remove Any security you have set (just to be safe)
Reboot to fastboot (bootloader)
run:
Code:
fastboot oem unlock
"You will be greeted with a Unlock Bootloader Warning page, Hit the Vol button to select Yes and turn it Blue and Hit the Power Button to Execute the selection, allow your device to reboot"
Backup EFS
If you have not already I'd recommend backing up EFS (to do so you need to be rooted, or else use TWRP):
Preferred, if rooted simply open a terminal and run:
Code:
su
dd if=/dev/block/sdf2 of=/sdcard/modemst1.bin bs=2048
dd if=/dev/block/sdf3 of=/sdcard/modemst2.bin bs=2048
Copy these files someplace safe!
If not rooted reboot to fastboot (bootloader):
Ensure that the latest twrp is in the same directory as fastboot (C:\Program Files (x86)\Minimal ADB and Fastboot) and run (3.2.1 was the lastest as of writing this):
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
This will boot the phone into twrp
Allow modification
Select backup
select only EFS and Modem
enter a meaningful name
swipe to backup
click "Reboot System" -> "Do not Install" for TWRP if asked.
You can now locate the backup under /storage/TWRP/BACKUPS and move it to a safe location off the phone.
Backup the Phone
Recommended if you care: Backup your entire phone using TWRP as well:
Ensure that the latest twrp is in the same directory as fastboot (C:\Program Files (x86)\Minimal ADB and Fastboot) and run (3.2.1 was the lastest as of writing this):
- fastboot.exe boot twrp-3.2.1-0-enchilada.img
This will boot the phone into twrp
Allow modification
Select backup
Select Everything except EFS and Modem
enter a meaningful name
swipe to backup
click "Reboot System" -> "Do not Install" for TWRP if asked.
You can now locate the backup under /storage/TWRP/BACKUPS and move it to a safe location off the phone.
Installing RR:
Finally we are ready to install RR (or any other Treble ROM), on the OnePlus 6. You will need a build from 6/7/2018 or later to have the required Vender-Hal to be present.
You will need to locate and install the AB version for the OnePlus 6.
Note: I'm using RR from 6/13 as the base for the guide: system-arm64-ab-gapps.img
SEE FIRST POST FOR CURRENT DOWNLOAD LOCATION I compiled this using phhusson's (Orginial Build Scripts)
instructions and a bit of setup on Linux. However most Treble base ROM's should work so long as they are from after 6/7/2018 in a similar manor.
* Remember this will wipe your device and you will loss all data *
First
boot in to fastboot (bootloader):
We need to go back to TRWRP and wipe internal storage and data to be safe, as the -w option to do so when flashing is not working for me.
- fastboot.exe boot twrp-3.2.1-0-enchilada.img
This will boot the phone into twrp
Allow modification
Select Wipe
Advanced Wipe
Select Cache, Data and "Internal Storage"
Swipe to Wipe
Click back until you are at the main menu
Click on Reboot
Click on Bootloader -> "Do not Install" for TWRP if asked.
Second
Flash the new ROM:
Flash vbmeta.img to remove validation
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
To be safe flash a default boot image (5.1.6 in this case)
Code:
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
Next reboot into recovery (you need to do this with volume down +Power, or selecting from bootload):
In stock recovery select English
Select Wipe Data and Cache
Reset system settings->yes->done
Wipe Cache->Yes->done
Erase everything->Thiscan not be undone, continue->done
back
Advanced
Reboot to fastboot->Reboot to fastboot
Now flash a the new ROM:
- fastboot flash system_a system-arm64-ab-gapps.img
- fastboot flash system_b system-arm64-ab-gapps.img
Three
reboot:
Code:
fastboot reboot
You will see the "andorid" boot screen (this is different that the Oxygen one) and being the first boot it could take a while. If you see no boot screen or it does not boot (give 10 minutes), then you likely need to repeat these steps again. If you boot into RR then continue.
You may get a Vender image mistake error ignore it it only appewars on boot.
Skip the Setup by clicking all four corners top left->top right->bottom right->bottom left (it my take more than one try), at this point you have no networking, that is what we want.
Suggestion make backup here as you have a working OS! -- Instructions to follow
Four
Move over required files: You now have RR installed and working:
Enable developer mode and then enable Advanced Reboot
Then copy over gapps-nano, Device+ ID.apk, magisk-manager apk and magisk installer zip to the phone
To get the magisk manager you need to extract it from the zip as I cloud not get the normal one to install. Extract the zip: Magisk-v16.3-factory-faizauthar12-20180406.zip copy common\magisk.apk to the phone
Five
Deal with: "Play Services not Certified by Google":
Install Device+ID (APK downloaed above) and Open
Once done open the second line shows the GSF ID for this device
Android Register GSF
Login using a gmail account (I suggest the one you use for the playstore)
Enter the GSF in the field, now we wait about 5 to 10 minutes for it to propigate
Reboot the phone as we want paly services to start fresh
First add a wIFI network.
Critical do not let any apps update until you have registered playstore, so if you see a notification saying downloading, select and click pause. Doing so with the updated 6/17 paystore resulted in a black screen where you would enter your password, no know work around other than reset if this happens.
click on playstore it should now start
Now login to your account and you should be go (it may take more than one attempt no idea why).
Now enable the update if previously paused
Update all Apps from the playstore before continuing, this may take a while give it 10 minutes
Optional: If you want remove Device+ID now (but I leave it as it is an easy way to get information).
You now have a working Playstore, if you have hung downloads then you may need to clear the cache for play services and the playstore I assume the unregistered might be the cause of them getting messed up.
Five
Install magisk:
Ensure you copied magisk zip and also the magisk manager apk to your phone, do not open, but click Done
Install the magisk manager, by locating the file in filemanager and selecting it.Reboot into fastbboot (bootloader) mode
Load TWRP:
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Install
Select the magisk zip from the filesystem and flash
clear cache
Reboot->System (If asked about installing TWRP swipe to install)
Allow the phone to fully boot
Suggested: Reboot the phone
Suggested: disable checks for updates as 5.7 does not work with this build.
Root is now setup.
Six
Installer th onPlus camera:
Many people want the one plus camera, copy the apk downloaed above to the phone.
Open and install via a file manager
Seven
resize Data (as it will be only 11GB), the partitioon will be larger, depending on your devide se we will use TWRP and resize2fs to grow it.
Reboot into fastbboot (bootloader) mode
Load TWRP:
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Advanced->Terminal
Code:
resize2fs /dev/block/sda17
Reboot System
Eight
Recommended, make a backup of your hard work:
Reboot into fastbboot (bootloader) mode
Load TWRP:
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Select backup
Select Everything except EFS and Modem (as I'm unsure exactly which you need)
enter a meaningful name
swipe to backup
click "Reboot System" -> Swipe to reboot
Once back in RR copy the backup off the phone
Eight
Start using your OnePlus 6 with RR 6.0, rooted and with GAPPS
Nine
Upgrading:
Upgrading is simply replacing the system partitions and only these paritions (tested going from 6/13->6/16->6/17 builds)
Boot into fastboot (advanced reboot options)
Now flash the new system files:
- fastboot flash system_a new_system-arm64-ab-gapps.img
- fastboot flash system_b new_system-arm64-ab-gapps.img
Load TWRP:
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Select Wipe
Advanced Wipe
Select Cache (and only Cache)
Swipe to Wipe
Reboot System
Ten
Restoring a Backup from TWRP
*This is a work in progress I can not work out how to do so safely*
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Select Restore
Select the backup
Select Everything (other than EFS and Modem!)
Got to the main menu
Select Wipe
Advanced Wipe
Select Cache (and only Cache)
Swipe to Wipe
Reboot Fastboot
Eleven
Night Light, Ambient Display, requires Root:
My suggestion is not to do this if you care abut battery as I've seen major drain (even with Ambient display disabled, testing this).
Copy the apk downloaded framework-res__auto_generated_rro.apk to /vendor/overlays
Code:
mount -o rw,remount -t ext4 /vendor
cp <location of file> /vendor/overlay
chcon u:object_r:vendor_overlay_file:s0 /vendor/overlay;chcon u:object_r:vendor_overlay_file:s0 /vendor/overlay/framework-res__auto_generated_rro.apk
Reboot
Comments:
TWRP does not boot if flashed onto RR (the TWRP logo appears but it will not boot), this is currently only go to protect you from using the OnePlus Recovery and messing up RR. Flashing TWRP does not affect booting into RR.
TWRP DOES handle encryption without an issue, even a wrong first pin is not an issue
TWRP making a backup of Treble ROM, backup everything for now: Data, Boot, System, System Image, Vendor, Vendor Image.
If you have problems with hung downloads from the Playstore: Pending hung PlayStore
Wifi can be flaky (appearently this is a more general issue as even stock had some issues, I fixed them by only using either 2.4 or 5Mhz wireless, if I had both active I had constant disconnects.
Worst case, to recovery, back to Oxygen 5.1.6 if you end up in a boot loop stuck booting to rtecovery, etc:
- flash-all.bat
Reboot into recovery (you need to do this with volume down +Power, or selecting from bootload):
In stock recovery select English
Select Wipe Data and Cache
Reset system settings->yes->done
Wipe Cache->Yes->done
Erase everything->This can not be undone, continue->done
back
Advanced
Reboot to fastboot->Reboot
Load TWRP:
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Copy the Oxygen full ROM back to the phone
Code:
adb push OnePlus6Oxygen_22_OTA_010_all_1806070151_ad8b19ed516e78.zip /sdcard
In TWRP
Install
Select OnePlus6Oxygen_22_OTA_010_all_1806070151_ad8b19ed516e78.zip
Go back to the root and select Advanced Wipe
Select Wipe
Advanced Wipe
Select Cache, Data and "Internal Storage"
Click on Reboot->Recovery (select Do not Install)
English
Wipe Cach and Data
Wipe Everything
Reboot
The phone will reboot same as the day it was made
If it does not then please refer to:
Mega Unbrick Guide for A Hard Bricked OnePlus 6
Note: Always boot fully at least once (I suggest twice and the first one is configuring android) before trying any steps above again.
Best of Luck, see a typo let me know
ERIC

thank you for this

[emoji102][emoji102][emoji102][emoji102][emoji102]
Sent from my ONEPLUS A6003 using Tapatalk

Thank you for putting so much hard work on this. Really much appreciated, will give it a try.

Might be a noob question, but due to treble, is the camera quality the same with the OnePlus app?

saintxseiya said:
Might be a noob question, but due to treble, is the camera quality the same with the OnePlus app?
Click to expand...
Click to collapse
No.

Great rom, I especially like the fact that I can choose to install without gapps (prefer fdroid). One thing that is missing is ambient display, hopefully it will be fixed sooner or later.

Stock OOS Cam on RR. Isn't that huge news? Wow! :good:
Abaddon said:
No.
Click to expand...
Click to collapse
Have you tried this yourself? Ignore the treble part of his comment, but why would stock cam on OOS vs stock cam on custom ROM give different results in terms of picture quality?

Pat123 said:
Stock OOS Cam on RR. Isn't that huge news? Wow! :good:
Have you tried this yourself? Ignore the treble part of his comment, but why would stock cam on OOS vs stock cam on custom ROM give different results in terms of picture quality?
Click to expand...
Click to collapse
same quality here

Pat123 said:
Stock OOS Cam on RR. Isn't that huge news? Wow! :good:
Have you tried this yourself? Ignore the treble part of his comment, but why would stock cam on OOS vs stock cam on custom ROM give different results in terms of picture quality?
Click to expand...
Click to collapse
Never said anything about results, only that it could be installed and works, (takes pictures), personally I do little with the camera and am not photographer, but it can be installed (link above) and installed.
Updated the working to remove any confusion.

Maibol said:
same quality here
Click to expand...
Click to collapse
Could you post some comparison pics? Including portrait shots.
Would be awesome.

saintxseiya said:
Could you post some comparison pics? Including portrait shots.
Would be awesome.
Click to expand...
Click to collapse
sorry bro celebrating today with the family too much beer .....

So seeing this not even a month after the release of the op6 makes me happy and hopeful that we get a fully working RR-OS for the OP6 in the near future !

Pat123 said:
Stock OOS Cam on RR. Isn't that huge news? Wow! :good:
Have you tried this yourself? Ignore the treble part of his comment, but why would stock cam on OOS vs stock cam on custom ROM give different results in terms of picture quality?
Click to expand...
Click to collapse
because Oneplus doesnt release blobs for camera

Pat123 said:
Stock OOS Cam on RR. Isn't that huge news? Wow! :good:
Have you tried this yourself? Ignore the treble part of his comment, but why would stock cam on OOS vs stock cam on custom ROM give different results in terms of picture quality?
Click to expand...
Click to collapse
It will never be the same as OOS stock. Because aside from there is no device tree provided by OnePlus, they will never release the camera blobs due to licensing issues. Once we get a stable and proper gcam port. It'll be better than the stock OOS cam or close

is a beautiful Rom, will there be an adaptation for twrp? I have to use the gapps, because at the go version Wear OS does not work. and in the gapp version would be nice if the smartbar was running. Unfortunately, the kill app does not work ( I can not use xposed, then my bank app will not work anymore

unix2208 said:
is a beautiful Rom, will there be an adaptation for twrp? I have to use the gapps, because at the go version Wear OS does not work. and in the gapp version would be nice if the smartbar was running. Unfortunately, the kill app does not work ( I can not use xposed, then my bank app will not work anymore
Click to expand...
Click to collapse
TWRP not for now as treble is build as an image, but you should be able to flash using twrp just switch to img (though I have not tested that).
The GApps version is posted the 6/18 is working great, see second post.
As for Banking I'm unsure if any Treble based ROM passed the checks, as with or without root, as they appear as unsigned.
As for smartbar, I'll give it a try when I get a chance, as I do not use it personally.
ERIC

So safetynet won't pass?

Resurrection Remix(8.1) GSI Treble Project

Resurrection Remix
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
Requirements:
Honor 9i (RNE- L22)
I don't know if this will work on the other variants like RNE-L21, L23.
[/LIST]
[*]Your device MUST have an unlockable bootloader.
[*] Your device MUST be Project Treble compatible. That means your device meets one of the following criteria:
[*] Your device LAUNCHED with Android 8.0 Oreo or a newer version (eg. Android 8.1 Oreo) AND is Google Play certified. (If you rooted your device/flashed another custom ROM and somehow ended up with your device being listed as uncertified in Google Play, then don’t worry. We’re only concerned about the status of the device as it was shipped.)
[*] Your device UPGRADED to Android 8.0 Oreo or a newer version AND was made Project Treble compatible by the manufacturer. See this article for a list of such devices.
[*] For honor 9i(RNE-L22) u need to be in EMUI 8.0 otherwise u wont be able to flash this rom.
[*]
[/LIST]
ROM link - https://mega.nz/#!BDJCBC4Y!doc877HCYLDeZD_xF2Rx0xKxH69YbTcOOBW6FytvCGo
Recovery for EMUI 8.0 - https://mega.nz/#!lGYwFSpZ!5otUYH4q8Vgwm7dmVImHmJmLY9CkPzCWJnjzpggxOi8
Guide How to flash recovery -
Boot into fastboot( Power off> connect to pc> Hold volume down+Power button)
Now extract the recovery zip in desktop
Go to the extracted folder there u will find a folder named data enter the data folder now once you are in that folder press and hold the shift key and right-click in the blank area , now select open camand window here.
Now u r in CMD enter the following code.
(Don't change any thing)
type - fastboot devices
(check if it shows any device if shows then process further or else install adb system wide properly)
type - fastboot flash recovery_ramdisk recovery.img
(this will flash the twrp in ur system)
type - fastboot reboot.
How to flash GSI system image? -
copy the downloaded rom image file to the extracted recovery folder
now once you are in that folder press and hold the shift key and right-click in the blank area , now select open camand window here.
Now u r in CMD enter the following code.
(Don't change any thing)
type - fastboot devices
(check if it shows any device if shows then process further or else install adb system wide properly)
type - fastboot -w
(this will wipe everything from your phone so before doing this take backup)
type - fastboot flash system RROS.img
(this will flash the rom)
when flash is finished
type - fastboot reboot.
now press & hold power button + volume up to go to recovery
once u r in twrp select wipe> do normal factory reset(no advance)
then go back twrp home select mount de-select mount partitions read-only and tick every partition
now go back to twrp home select Install> select gapps zip file> swipe to install
after installing gapps do a normal factory reset and reboot
HERE IS THE TRICKY PART
AFTER REBOOTING SYSTEM HUWAIE eRECOVERY WILL ASK TO FORMAT THE DATA PARTITION , DO THAT, AFTER THAT IT MAY AGAIN TAKE YOU TO TWRP DO A SIMPLE FACTORY RESET AND REBOOT SYSTEM
NOW GIVE IT SOME TIME TO BOOT UP
To gain root access in this rom follow this process-
Download the Magisk flashable zip from here- https://mega.nz/#!VTIk2KYb!1GiyvrJsaovscKH2j3Jb2ySPowcxzSy3h--4MaJJv60
Flash this via TWRP and reboot
Then install this magisk manager apk - https://mega.nz/#!ZDQgQAJa!fzi8TjfAxsLTSQYD_zRqdxhUKNSy6ylhX_ZF5tyyGQ8
Open magisk manager
there click on install > select direct install(recomended)
Voila u r rooted now.
Note: all the credit goes to the GSI image developer @phh
A big thanks to @KingofMezi for the recovery.
Please hit the thanks button for me.
XDA:DevDB Information
Resurrection Remix(8.1) GSI Treble Project, ROM for the Honor 9i
Contributors
sknoman1, phh
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 8.0
Based On: AOSP
Version Information
Status: Stable
Created 2018-06-21
Last Updated 2018-06-21

sknoman1 said:
Resurrection Remix
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
Requirements:
Honor 9i (RNE- L22)
I don't know if this will work on the other variants like RNE-L21, L23.
[/LIST]
[*]Your device MUST have an unlockable bootloader.
[*] Your device MUST be Project Treble compatible. That means your device meets one of the following criteria:
[*] Your device LAUNCHED with Android 8.0 Oreo or a newer version (eg. Android 8.1 Oreo) AND is Google Play certified. (If you rooted your device/flashed another custom ROM and somehow ended up with your device being listed as uncertified in Google Play, then don’t worry. We’re only concerned about the status of the device as it was shipped.)
[*] Your device UPGRADED to Android 8.0 Oreo or a newer version AND was made Project Treble compatible by the manufacturer. See this article for a list of such devices.
[*] For honor 9i(RNE-L22) u need to be in EMUI 8.0 otherwise u wont be able to flash this rom.
[*]
[/LIST]
ROM link - https://mega.nz/#!BDJCBC4Y!doc877HCYLDeZD_xF2Rx0xKxH69YbTcOOBW6FytvCGo
Recovery for EMUI 8.0 - https://mega.nz/#!lGYwFSpZ!5otUYH4q8Vgwm7dmVImHmJmLY9CkPzCWJnjzpggxOi8
Guide How to flash recovery -
Boot into fastboot( Power off> connect to pc> Hold volume down+Power button)
Now extract the recovery zip in desktop
Go to the extracted folder there u will find a folder named data enter the data folder now once you are in that folder press and hold the shift key and right-click in the blank area , now select open camand window here.
Now u r in CMD enter the following code.
(Don't change any thing)
type - fastboot devices
(check if it shows any device if shows then process further or else install adb system wide properly)
type - fastboot flash recovery_ramdisk recovery.img
(this will flash the twrp in ur system)
type - fastboot reboot.
How to flash GSI system image? -
copy the downloaded rom image file to the extracted recovery folder
now once you are in that folder press and hold the shift key and right-click in the blank area , now select open camand window here.
Now u r in CMD enter the following code.
(Don't change any thing)
type - fastboot devices
(check if it shows any device if shows then process further or else install adb system wide properly)
type - fastboot -w
(this will wipe everything from your phone so before doing this take backup)
type - fastboot flash system RROS.img
(this will flash the rom)
when flash is finished
type - fastboot reboot.
now press & hold power button + volume up to go to recovery
once u r in twrp select wipe> do normal factory reset(no advance)
then go back twrp home select mount de-select mount partitions read-only and tick every partition
now go back to twrp home select Install> select gapps zip file> swipe to install
after installing gapps do a normal factory reset and reboot
HERE IS THE TRICKY PART
AFTER REBOOTING SYSTEM HUWAIE eRECOVERY WILL ASK TO FORMAT THE DATA PARTITION , DO THAT, AFTER THAT IT MAY AGAIN TAKE YOU TO TWRP DO A SIMPLE FACTORY RESET AND REBOOT SYSTEM
NOW GIVE IT SOME TIME TO BOOT UP
To gain root access in this rom follow this process-
Download the Magisk flashable zip from here- https://mega.nz/#!VTIk2KYb!1GiyvrJsaovscKH2j3Jb2ySPowcxzSy3h--4MaJJv60
Flash this via TWRP and reboot
Then install this magisk manager apk - https://mega.nz/#!ZDQgQAJa!fzi8TjfAxsLTSQYD_zRqdxhUKNSy6ylhX_ZF5tyyGQ8
Open magisk manager
there click on install > select direct install(recomended)
Voila u r rooted now.
Note: all the credit goes to the GSI image developer @phh
A big thanks to @KingofMezi for the recovery.
Please hit the thanks button for me.
XDA:DevDB Information
Resurrection Remix(8.1) GSI Treble Project, ROM for the Honor 9i
Contributors
sknoman1, phh
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: EMUI 8.0
Based On: AOSP
Version Information
Status: Stable
Created 2018-06-21
Last Updated 2018-06-21
Click to expand...
Click to collapse
Your download link is not working. There is an error:
The file you are trying to download is no longer available.
This could be due to the following reasons:
The file has been removed because of a ToS/AUP violation.
Invalid URL - the link you are trying to access does not exist
The file has been deleted by the user.

Hey guys could you help me with any Android pie gsi ROMs with VOLTE support for my Honor 9i RNE L22? I have been searching a lot but didn't come across any suitable one.

[RECOVERY][TB-X605F/L][OFFICIAL] TWRP 3.6.x for Lenovo Smart Tab M10

This version of TWRP works on both the TB-X605F (wifi) and TB-X605L (LTE). It does not work for the TB-X605FC/FL (Tab M10 FHD Rel).
Warning: this TWRP is for the Lenovo Smart Tab M10 with the Snapdragon 450 (SDA450) chipset. This image will not work for the second gen M10 (TB-X606F/L), which use a Mediatek SOC. See this thread.
For the M10 HD (TB-X505F/L), see this thread. For the TB-X505X, see this thread.
Code:
#include <std_disclaimer.h>
/*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Possible issues with TB-X605L
If the latest version of TWRP for TB-X605F doesn't work for your TB-X605L model, try version 3.4.0-0 from twrp.me.
Installation
TWRP for this device is officially supported. You can download it from twrp.me or in the TWRP App (from the PlayStore). Installation instructions are included on twrp.me.
It is recommended that you also install Magisk. This will ensure TWRP remains your default recovery.
Step-by-step guide
download TWRP to your PC (see the Download section below)
download magisk.zip to your MicroSD or OTG device. Get the latest Magisk zip file here.
if your bootloader is already unlocked, go to step 4. To unlock bootloader:
on tablet: go to Settings->System->About and press "Build number" 7 times to enable Developer Options.
on tablet: go to Settings->System->DeveloperOptions. Turn on: "OEM unlocking" and "USB debugging".
connect tablet to your computer. Tablet will ask for permission to "Allow USB debugging". Tick "always allow" and select "OK".
backup any files you want to keep to an external device (MicroSD/OTG/computer), because the next step will wipe all your photos, files, google account etc on the tablet.
Now unlock the bootloader:
Code:
adb reboot bootloader
fastboot oem unlock-go
fastboot reboot
flash the twrp image:
Code:
adb reboot bootloader
fastboot flash recovery twrp.img
if you haven't loaded Magisk yet, go to step 6. If you have already loaded Magisk, you can just reboot and you're finished:
Code:
fastboot reboot
adb reboot recovery
load Magisk (step one): reboot to recovery. Do not reboot into the system, because it will over-write TWRP with stock recovery. If that happens, go back to step 4 and start again. When you issue the reboot command (below), you have to immediately press the button combination to reboot to recovery (TWRP). Here are the steps:
issue the reboot command:
Code:
fastboot reboot
immediately press and hold all three buttons (Pwr+VolUp+VolDown). The tablet might reboot twice. Release all the buttons when you see the TWRP screen, or hear your PC acknowledge that ADB is connected.
load Magisk (step two): flash Magisk. In TWRP:
select "Install"
use "select storage" to locate device you stored magisk.zip on.
press the OK button
select the Magisk zip file
swipe to confirm Flash
when Magisk is finished, hit the back button to go back to main TWRP screen.
select "Reboot" then "System"
if the Magisk Manager app wasn't automatically loaded, you can get it here.
finished!
If you prefer to use button combos, rather than fastboot/ADB commands:
Vol Down + Power = fastboot mode
Vol Up + Vol Down + Power = recovery mode
Changelog
Code:
02/03/2022 - TWRP 3.6.1_9: new TWRP release
23/11/2021 - TWRP 3.6.0_9: new TWRP release
01/01/2021 - TWRP 3.5.0-0: new TWRP release
21/11/2020 - TWRP 3.4.0-1: new official version with SPL patch
19/11/2020 - promoted security patch level to 2099-12-31. No need to worry about SPLs ever again.
02/09/2020 - promote security patch level to 2020-08-01 for TB-X605F_S210208_200807_ROW
06/08/2020 - officially supported
31/07/2020 - upgrade to TWRP 3.4.0-0
- data decryption working (security patch 2020-04-01)
- landscape mode (by popular demand)
- add more partitions to Backup options
15/01/2020 - reverted to API 28 (Android Pie)
- renamed "sdcard1" to "external_sd"
- changed [ro.build.incremental.version] in preparation for OTA #4
24/11/2019 - fixed date/time & EDL reboot mode
- dropped back to API 27
20/11/2019 - initial commit (API 28) - encryption/decryption not working
Downloads
official​
TWRP for X605F: twrp.me
Source code
github.com/minimal-manifest-twrp/platform_manifest_twrp_omni/tree/twrp-9.0
github.com/TeamWin/android_device_lenovo_X605F (official)
github.com/Yahoo-Mike/recovery_device_lenovo_X605F (unofficial)
FAQ
See the third post for answers to some FAQs like:
Will this TWRP work with other M10 and P10 devices?
Why is my "Data" partition empty (0 MB)?
how do I root my device?
Credits
The guys at TeamWin Recovery Project.
Everyone whose device trees I plagiarised from GitHub.
The amazing work of @Chaser42, @Long_Sam and others to get this project started.
XDA:DevDB Information
X605F Recovery, Tool/Utility for the Lenovo Thinkpad Tablet
Contributors
Yahoo Mike, Chaser42
Source Code: https://github.com/TeamWin/android_device_lenovo_X605F
Version Information
Status: Testing
Created 2019-11-19
Last Updated 2022-05-22 (v3.6.1 and warning for TB-X605L)

Encryption/Decryption
When you load the stock ROM, it creates and automatically encrypts the data partition. If you are not using the correct TWRP version, the data partition might be empty (0 MB). This is because TWRP failed to decrypt the data partition.
If your data partition is 0MB in TWRP, make sure you have loaded the latest version of TWRP (Nov 2020 or newer). Older builds required the security patch levels to match on TWRP and your system.
If you want to remove encryption completely, then you can use the dm-verity-forceencrypt tool. @turboperson123 has put together some instructions to remove encryption. If you've already loaded TWRP, then you only need to follow steps 6 and 7 from that post. @turboperson123 's method uses @Zackptg5 's Universal DM-Verity, ForceEncrypt, Disk Quota Disablers tool to remove encryption and dm-verity.

FAQs
Can I use this TWRP on other M10 and P10 tablets?
There are quite a few variants of these Tabs that use the Snapdragon 450 (SDM450) chipset:
TB-X605F (Tab M10 wifi) - tested working this TWRP
TB-X605L (Tab M10 LTE) - tested working with TWRP ( thanks @alexupsa )
TB-X705F/L (Tab P10) - no. Use the twrp available on this thread.
For the TB-X505F/L (M10 HD) see this post.
NOTE: the TB-606F/L (M10 2nd gen), TB-X605FC (M10 FHD) use different chipsets, so this TWRP won't work.
Why is my "Data" partition 0MB?
See the second post in this thread.
What should I backup?
Short answer: everything.
But the bare minimum might include:
System Image
Vendor Image
Firmware/Modem
Persist
Data
Cache
Boot
How do I root my device?
To root your device, here are the instructions for the:
X705F (thanks to @Chaser42)
X605F/L - follow steps 6 & 7 in the OP above. If you don't want to load TWRP, then try something like @Long_Sam's patched boot.img method.
X505F/L - follow the "step by step guide" in the OP above. Just make sure you use twrp for X505F (not for X605F).
How do I load OTAs with TWRP?
Note: if you ran the dm-verity-forceencrypt tool to unencrypt your /data, then the steps below will not work.
select "uninstall" in the Magisk Manager app. If MM doesn't reboot the system, then reboot - this will re-install stock recovery.
install the OTA (either in the system or using stock recovery).
re-flash TWRP (for the new security patch level)
re-install Magisk

TB-X605L working properly. Thank you!
TB-X605L working properly. Thank you!

Yahoo Mike said:
This is a work in progress. Volunteer testers are very welcome.
Click to expand...
Click to collapse
Wow...
That's really huge...
As we say here : "Monsieur, chapeau bas !"
Long_Sam

Lenovo has released quite a few variants of the Tab M10 now. I'm not sure this TWRP will work on all of them.
There are now even variants of a variant !
Code:
[B]M10[/B] with SDM-450 models: X605F (wifi) & X605L (LTE)
[B]M10 HD[/B] with SDM-429 models: X505F (wifi), X505L (LTE) & X505X (LTE Bands 1,2,3,4,5,7,8,20,38,40)
[B]M10 FHD[/B] with SDM-450 models: X605FC (wifi) & X605LC (LTE)
The M10 I have is shipped with a Snapdragon 450 (SDM-450) chipset & Hardware Code 63. But I see on their US site that Lenovo are now putting the SDM-429 in the X605. This might cause a problem with TWRP. I'm not sure if the kernels will be compatible.
The TWRP I've posted is for the X605F/L SDM450 (HW=63). I might need to compile a different TWRP for the SDM429 versions of the X605 & the X505.
If your X605 or X505 shipped with the SDM429, can you let me know if this TWRP works ? I need to know the Hardware Version, CPU and Hardware Code. Hardware Version and CPU are in System->About. The Hardware Code is in brackets after the S/N on the sticker on the back of the tablet, eg S/N Hxxxxxxx (63).
If you have an X605FC/LC, let me know if this TWRP works. I think it will, but I want make sure.

I have one with the 429 TB-X505F SD429 HW71 If i get some time today I might be bale to try it. I'll post soon as I do.

This morning I successfully compiled and ran the P10 kernel source on my M10. I had to tweak the config a bit. I tested it in TWRP. No problems.
Tomorrow, I'll inject it into the boot.img of the system ROM and see what happens. If it is mostly stable, then we're on the way to LOS for the M10. If it's completely stable, I'll push the source up to github.
I'll continue to use the stock kernel for the released versions of TWRP in this thread, though.
Thanks to @clsA for helping me work out that the M10 kernel is a subset of the P10 kernel.

@Yahoo Mike
thx for the twrp
succesfully flashed on my X605L
"Stock recovery image (recovery_stockROM.img) from TB-X605F_USR_S200065_1905280020_Q00332_ROW - just in case something goes wrong & you need to restore stock recovery. Only use this image on a TB-X605F. If you need it for any other variant, just ask in this thread and we'll track it down for you."
do you have the stock recovery for the X605L ?
how can i backup "DATA" inside twrp ?
will this help ?
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389

OSIRIS2010 said:
...
do you have the stock recovery for the X605L ?
Click to expand...
Click to collapse
Now I think of it, you don't need it. If TWRP fails to flash, then stock recovery will still be there. If stock recovery is still not loading, just boot into the system and shutdown. When you shutdown, the system will re-flash stock recovery for you.
OSIRIS2010 said:
...
how can i backup "DATA" inside twrp ?
Click to expand...
Click to collapse
Have a look at the second post.
TL;DR...the dm-verity-forceencrypt tool will do it. But it will break the next OTA. The unencrypted P10 guys are having problems at the moment with this.
I've tried to get TWRP to unencrypt the data partition, but I can't get KeyMaster to initialise successfully. Maybe the next version of TWRP will be able to do it.

Yooo. Sorry I took so long works been crazy. I cant get it to reboot into twrp recovery. Its flashes the 605 recovery then I follow the next steps in the guide but I can only get it to reboot to the stock recovery screen. Run the reboot recovery command then immediately hold the volume + - down along with power. I tried a lot I let reboot twice then let off, and nothing then I tried several more times. Reflashing then the next step. I must not be holding my mouth...err I mean pushing the buttons right or the recovery just isn't gonna work. Add I'm very newbie at rooting and customizing. I've I've rooted one phone. A 70$ moto g5 plus I got off Ebay that was basically brand new. Installed twrp recovery and magisk. I bought that cause I have SD note 9 I cant root and have this need to play YouTube videos in my truck lol. Let me know if you have any suggestions I can try. Or ideas that might make it work. I pretty much fubard the tab and (at a different time) before I tried this recovery and was able to reflash stock img though odin.

11mackey11 said:
Yooo. Sorry I took so long works been crazy. I cant get it to reboot into twrp recovery. Its flashes the 605 recovery then I follow the next steps in the guide but I can only get it to reboot to the stock recovery screen. Run the reboot recovery command then immediately hold the volume + - down along with power. I tried a lot I let reboot twice then let off, and nothing then I tried several more times. Reflashing then the next step. I must not be holding my mouth...err I mean pushing the buttons right or the recovery just isn't gonna work. Add I'm very newbie at rooting and customizing. ...
Click to expand...
Click to collapse
Don't be too hard on yourself...you've done well to get this far.
I just had a quick look at the kernel for the X505F. It's very different from the X605F. So this TWRP definitely won't work for you. Sorry.
If you want me to build a TWRP for the X505F, PM me and we'll work something out.

How do you remove twrp I think that or magisk is giving me the booting issues. Half the time I reboot for things it gets stuck. Not sure if it's root or twrp but I can't seem to remove either.

cbomb1337 said:
How do you remove twrp I think that or magisk is giving me the booting issues. Half the time I reboot for things it gets stuck. Not sure if it's root or twrp but I can't seem to remove either.
Click to expand...
Click to collapse
If you uninstall Magisk, then the system will overwrite TWRP with stock recovery the next time you reboot. Just tap "uninstall" in the Magisk Manager app. You can also remove Magisk from TWRP following these instructions.
What kind of boot issues are you having? Are you using a TB-X605F with SDA450? Or is it something similar?

I am using Tb 605f it seems to be booting fine now after removing this riru module and edxposed. I'll just leave that and stick with just viper 4 Android lol
Do you know if them modules for increasing speed work? I think one of them was called fde and there the doze one.

cbomb1337 said:
I am using Tb 605f it seems to be booting fine now after removing this riru module and edxposed. I'll just leave that and stick with just viper 4 Android lol
Do you know if them modules for increasing speed work? I think one of them was called fde and there the doze one.
Click to expand...
Click to collapse
Good to hear it's all working again.
Sorry, I haven't tried any of those tweaks.

Lenovo have updated the stock ROM they serve for the TB-X605F through LMSA rescue. It's now at TB-X605F_USR_S210126_1910290024_Q00332_ROW. This is the latest update. There are no OTAs to apply. The M10 is due for a security OTA pretty soon, though. The P10 has already received it.
Unfortunately, it's no longer possible to post a direct link to Lenovo's website for this ROM. You'll have to use LMSA to get it.
FYI. Lenovo have changed how they serve the stock ROM. The ROM is now kept at rsdsecure-cloud.motorola.com. LMSA seems to generate (or request and receive) a one-off time-limited credentialed ticket for the download. You can't download the zip files without the credentials attached to the URL.
If you really want to, you can still intercept the URL in download_resources.json in the LMSA download folder.

is there anything new in the update. i might hold of because i dont want to lose root.

cbomb1337 said:
is there anything new in the update. i might hold of because i dont want to lose root.
Click to expand...
Click to collapse
No, there's nothing new. This isn't really an update, it just seems to be a consolidation of the old stock ROM and incremental OTAs.

This is only for M10 wifi (TB-X605F) with SDA450.
The latest OTA for TB-X605F has just landed. It's available on your tablet, or directly from: TB-X605F_USR_S210126_191029_Q00332_ROW_TO_TB-X605F_USR_S210152_200120_Q00332_ROW_WCE26E2CD5.zip.
The update takes the M10 to:
Code:
build: TB-X605F_USR_S210152_200120_ROW
security patch: 1 January 2020
kernel: 3.18.120-perf-gd60e12b6-dirty
If you have TWRP and root, you'll need to:
select "uninstall" in the Magisk Manager app
install the OTA (from SD card) in recovery and reboot
re-flash TWRP
re-install Magisk
only if you unencrypted the data partition
If you have unencrypted your data partition, it will be re-encrypted during this process. Make sure you back it up before you start the OTA. You might also need to restore the TWRP backup you made of the vendor partition, before the OTA will run. Once the OTA, TWRP and Magisk are installed, you can re-run the dm-verity tool.

[Guide] [SM-T515] android 9 Install custom ROM'S and ROOT

SIZE="6"]Use this guide if your tablet is running on android 9. Android 10 is not covered in this guide[/SIZE]
Instructions:
Code:
* READ EVERTHING BEFORE YOU START OR ASK QUESTIONS
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard & a lot. :D
I’m not an expert, I’ve just put some pieces together to achieve the following.
If you have problems, I’m not sure if I’m able to help you
You need to have some basic knowledge
Always have the correct software and backup all your data.
o Also download before you start the stock files, so that you are able to quickly reverse everything via: sammobile
Remember to backup your data!!!!
If you have trouble and the tablet is not working flash the firmware which you’ve downloaded via odin
Working ROMS (Which I’ve tested so far):
IF you want to install a custom ROM, you need to choose the correct custom ROM
Choose the ARM 32-bit with 64-bit binder AB (also known as A64B).
LineageOS 17.x GSI here
Legion ROM GSI here
From OEM stock firmware:
Download TWRP https://forum.xda-developers.com/ga...rp-3-3-1-2019-galaxy-tab-10-1-t3934805/page35
Unlock bootloader
Hold Vol Up & Vol Down buttons during restart to enter Download mode
Install TWRP to AP with Odin
Hold Power & Vol Up buttons during restart to enter TWRP recovery
Install latest Multidisabler from TWRP
Wipe->Format Data
Reboot to system
Check if OEM unlock is enabled in the developer settings (it should be enabled and greyed out) IF so yeey you did It. If not start over.
Install custom ROM:
Well installing a custom Rom is quite easy .
Download a GSI ROM you like and put it on a SD cart
Go into TWRP
Select “install”
Click on “install image”
Click the on the ROM
In the next screen where we need to select the partition, select the “System Image”
Swipe to confirm
If you want ROOT and or install GAPPS follow the extra steps bellow. If NOT, just reboot the system
Extra’s install MAGISK and or install GAPPS
First of all download the files you want.
Magisk: here
GAPPS: here
You want root? You need to prepare the TWRP image yourself, simply use Magisk Manager to Select and Patch a File. Which we can prepare and flash after you finished the setup of the tablet. You need more info check the following: link
Go back to the TWRP home screen
Select “Wipe”
Select advanced wipe
Check “system”
Click on “repair or change file system”
Click on “resize file system” (if you’ve receive an error, don’t worry just do It again).
o You should see “resizing… done.”
Go back to the TWRP home screen
Select “install”
Select the zip file(‘s) you want and flash them
o IF you receive an error if you want to install the GAPPS zip like “not enough space” go back and resize the system partition
o IF you receive an errro if you want to install Magisk, go back and resize the system partition
Remove “dalvik and cache”
Reboot system
Setup your tablet
Now for the last step to root the tablet all the way
Go into Magisk manager
On the Magisk dashboard you’ve should see that you have the latest version of magisk. Press on the “install” button at the right side
o Select “Select and Patch a File” select the TWRP IMG you still have on the SD card
o Magisk should create a “magisk_patched.img”.
If you have the “magisk_patched.img” go into TWRP and flash this IMG over the recovery
o Install
o Select “install image”
o Select the “magisk_patched.img”
o Flash it over the “recovery”
o Reboot system
Yeey you have a Samsung sm-t515 which is rooted and you have a custom ROM.

one last question
massivekind said:
Instructions:
Code:
* READ EVERTHING BEFORE YOU START OR ASK QUESTIONS
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard & a lot. :D
I’m not an expert, I’ve just put some pieces together to achieve the following.
If you have problems, I’m not sure if I’m able to help you
You need to have some basic knowledge
Always have the correct software and backup all your data.
o Also download before you start the stock files, so that you are able to quickly reverse everything via: sammobile
Remember to backup your data!!!!
If you have trouble and the tablet is not working flash the firmware which you’ve downloaded via odin
Working ROMS (Which I’ve tested so far):
IF you want to install a custom ROM, you need to choose the correct custom ROM
Choose the ARM 32-bit with 64-bit binder AB (also known as A64B).
LineageOS 17.x GSI here
Legion ROM GSI here
From OEM stock firmware:
Download TWRP https://forum.xda-developers.com/ga...rp-3-3-1-2019-galaxy-tab-10-1-t3934805/page35
Unlock bootloader
Hold Vol Up & Vol Down buttons during restart to enter Download mode
Install TWRP to AP with Odin
Hold Power & Vol Up buttons during restart to enter TWRP recovery
Install latest Multidisabler from TWRP
Wipe->Format Data
Reboot to system
Check if OEM unlock is enabled in the developer settings (it should be enabled and greyed out) IF so yeey you did It. If not start over.
Install custom ROM:
Well installing a custom Rom is quite easy .
Download a GSI ROM you like and put it on a SD cart
Go into TWRP
Select “install”
Click on “install image”
Click the on the ROM
In the next screen where we need to select the partition, select the “System Image”
Swipe to confirm
If you want ROOT and or install GAPPS follow the extra steps bellow. If NOT, just reboot the system
Extra’s install MAGISK and or install GAPPS
First of all download the files you want.
Magisk: here
GAPPS: here
You want root? You need to prepare the TWRP image yourself, simply use Magisk Manager to Select and Patch a File. Which we can prepare and flash after you finished the setup of the tablet. You need more info check the following: link
Go back to the TWRP home screen
Select “Wipe”
Select advanced wipe
Check “system”
Click on “repair or change file system”
Click on “resize file system” (if you’ve receive an error, don’t worry just do It again).
o You should see “resizing… done.”
Go back to the TWRP home screen
Select “install”
Select the zip file(‘s) you want and flash them
o IF you receive an error if you want to install the GAPPS zip like “not enough space” go back and resize the system partition
o IF you receive an errro if you want to install Magisk, go back and resize the system partition
Remove “dalvik and cache”
Reboot system
Setup your tablet
Now for the last step to root the tablet all the way
Go into Magisk manager
On the Magisk dashboard you’ve should see that you have the latest version of magisk. Press on the “install” button at the right side
o Select “Select and Patch a File” select the TWRP IMG you still have on the SD card
o Magisk should create a “magisk_patched.img”.
If you have the “magisk_patched.img” go into TWRP and flash this IMG over the recovery
o Install
o Select “install image”
o Select the “magisk_patched.img”
o Flash it over the “recovery”
o Reboot system
Yeey you have a Samsung sm-t515 which is rooted and you have a custom ROM.
Click to expand...
Click to collapse
you have been very kind. I'd like to ask you one last question. for the t515 (since the lineage os is generic) do you also use a particular kernel (which optimizes performance maybe) ?. thanks

gcomunale71 said:
Instructions:
you have been very kind. I'd like to ask you one last question. for the t515 (since the lineage os is generic) do you also use a particular kernel (which optimizes performance maybe) ?. thanks
Click to expand...
Click to collapse
No I don't have any, but if there is one for the 510 give it a try.
Of course backup before flashing

Hi,
Thanks for the guide. Which ROM you recommend? Everything working for you (LTE modem etc)?
Can you now install 64bit apps from Google Play? Any chance you can check if the DJI Fly app is working on your SM-T515?
https://play.google.com/store/apps/details?id=dji.go.v5
Thanks

liamR said:
Hi,
Thanks for the guide. Which ROM you recommend? Everything working for you (LTE modem etc)?
Can you now install 64bit apps from Google Play? Any chance you can check if the DJI Fly app is working on your SM-T515?
https://play.google.com/store/apps/details?id=dji.go.v5
Thanks
Click to expand...
Click to collapse
Well, It's still a 32bit rom. I've tried to install the app but I'm unable (prob because the app is 64bit)
Everything works fine, I'm running the lineageOS ROM. I have a data bundle and I'm able to internet with it (if I want )

massivekind said:
Well, It's still a 32bit rom. I've tried to install the app but I'm unable (prob because the app is 64bit)
Everything works fine, I'm running the lineageOS ROM. I have a data bundle and I'm able to internet with it (if I want )
Click to expand...
Click to collapse
I thought that this custom ROM is 64bit
When I bought the TAB A I thought it's a bargain, I didn't know that I wouldn't be able to install 64bit apps.

massivekind said:
Instructions:
Code:
* READ EVERTHING BEFORE YOU START OR ASK QUESTIONS
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard & a lot. :D
I’m not an expert, I’ve just put some pieces together to achieve the following.
If you have problems, I’m not sure if I’m able to help you
You need to have some basic knowledge
Always have the correct software and backup all your data.
o Also download before you start the stock files, so that you are able to quickly reverse everything via: sammobile
Remember to backup your data!!!!
If you have trouble and the tablet is not working flash the firmware which you’ve downloaded via odin
Working ROMS (Which I’ve tested so far):
IF you want to install a custom ROM, you need to choose the correct custom ROM
Choose the ARM 32-bit with 64-bit binder AB (also known as A64B).
LineageOS 17.x GSI here
Legion ROM GSI here
From OEM stock firmware:
Download TWRP https://forum.xda-developers.com/ga...rp-3-3-1-2019-galaxy-tab-10-1-t3934805/page35
Unlock bootloader
Hold Vol Up & Vol Down buttons during restart to enter Download mode
Install TWRP to AP with Odin
Hold Power & Vol Up buttons during restart to enter TWRP recovery
Install latest Multidisabler from TWRP
Wipe->Format Data
Reboot to system
Check if OEM unlock is enabled in the developer settings (it should be enabled and greyed out) IF so yeey you did It. If not start over.
Install custom ROM:
Well installing a custom Rom is quite easy .
Download a GSI ROM you like and put it on a SD cart
Go into TWRP
Select “install”
Click on “install image”
Click the on the ROM
In the next screen where we need to select the partition, select the “System Image”
Swipe to confirm
If you want ROOT and or install GAPPS follow the extra steps bellow. If NOT, just reboot the system
Extra’s install MAGISK and or install GAPPS
First of all download the files you want.
Magisk: here
GAPPS: here
You want root? You need to prepare the TWRP image yourself, simply use Magisk Manager to Select and Patch a File. Which we can prepare and flash after you finished the setup of the tablet. You need more info check the following: link
Go back to the TWRP home screen
Select “Wipe”
Select advanced wipe
Check “system”
Click on “repair or change file system”
Click on “resize file system” (if you’ve receive an error, don’t worry just do It again).
o You should see “resizing… done.”
Go back to the TWRP home screen
Select “install”
Select the zip file(‘s) you want and flash them
o IF you receive an error if you want to install the GAPPS zip like “not enough space” go back and resize the system partition
o IF you receive an errro if you want to install Magisk, go back and resize the system partition
Remove “dalvik and cache”
Reboot system
Setup your tablet
Now for the last step to root the tablet all the way
Go into Magisk manager
On the Magisk dashboard you’ve should see that you have the latest version of magisk. Press on the “install” button at the right side
o Select “Select and Patch a File” select the TWRP IMG you still have on the SD card
o Magisk should create a “magisk_patched.img”.
If you have the “magisk_patched.img” go into TWRP and flash this IMG over the recovery
o Install
o Select “install image”
o Select the “magisk_patched.img”
o Flash it over the “recovery”
o Reboot system
Yeey you have a Samsung sm-t515 which is rooted and you have a custom ROM.
Click to expand...
Click to collapse
first of all thanks for the great work.
Sorry if this is a stupid question , but before i brick my new SM-T515 I would rather ask the experts.
Now, i have rooted the stock ROM folowing the steps in https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root with no TWRP and want to install one of the custom ROMs you have tested.
will I lose root if flash the Legion ROM GSI?
if yes, can you please put some steps together to root and install TWRP?
i still have the “magisk_patched.tar" from the stock ROM, would that work for the Legion ROM GSI?

dj-rjay said:
Instructions:
first of all thanks for the great work.
Sorry if this is a stupid question , but before i brick my new SM-T515 I would rather ask the experts.
Now, i have rooted the stock ROM folowing the steps in https://topjohnwu.github.io/Magisk/install.html#samsung-system-as-root with no TWRP and want to install one of the custom ROMs you have tested.
will I lose root if flash the Legion ROM GSI?
if yes, can you please put some steps together to root and install TWRP?
i still have the “magisk_patched.tar" from the stock ROM, would that work for the Legion ROM GSI?
Click to expand...
Click to collapse
In theory it should work. I've already covered "root" also in the guide

I've followed the steps and have Lineage installed on my T515, but when I plug it into my computer it can't see the Tablet in Windows Explorer. I've set it to MTP mode and enabled USB debugging. Strange thing is when I use ADB DEVICES I can see it. Also when I plug it in, the tablet makes a sound and it says 'Usb Debugging...' on screen. It just won't show up in Windows.
Also when I try and use File Explorer on the tablet, it can't see the SD Card. I've tried formatting it for 'Portable' but it when I go back in it says it corrupted. When I format it for Phone Storage, it shows the extra space for the phone storage but I also can't see it in the File Explorer.
Anyone else come across this?

Sambuca11 said:
I've followed the steps and have Lineage installed on my T515, but when I plug it into my computer it can't see the Tablet in Windows Explorer. I've set it to MTP mode and enabled USB debugging. Strange thing is when I use ADB DEVICES I can see it. Also when I plug it in, the tablet makes a sound and it says 'Usb Debugging...' on screen. It just won't show up in Windows.
Also when I try and use File Explorer on the tablet, it can't see the SD Card. I've tried formatting it for 'Portable' but it when I go back in it says it corrupted. When I format it for Phone Storage, it shows the extra space for the phone storage but I also can't see it in the File Explorer.
Anyone else come across this?
Click to expand...
Click to collapse
Mm strange, i don't use both functions so I can't really help you.
Maybe you could format the sd card via twrp?
On my side the sd card works. Didn't format the sd card so don't really know

Sambuca11 said:
I've followed the steps and have Lineage installed on my T515, but when I plug it into my computer it can't see the Tablet in Windows Explorer. I've set it to MTP mode and enabled USB debugging. Strange thing is when I use ADB DEVICES I can see it. Also when I plug it in, the tablet makes a sound and it says 'Usb Debugging...' on screen. It just won't show up in Windows.
Also when I try and use File Explorer on the tablet, it can't see the SD Card. I've tried formatting it for 'Portable' but it when I go back in it says it corrupted. When I format it for Phone Storage, it shows the extra space for the phone storage but I also can't see it in the File Explorer.
Anyone else come across this?
Click to expand...
Click to collapse
I have the same issue. Any solution?

zamboj said:
I have the same issue. Any solution?
Click to expand...
Click to collapse
I haven't found one yet, I'm going to try go back to Stock as I need my computer to be able to see the tablet to transfer files over. I've tried installing the Legion custom rom and it does the same thing. I'm not sure but I'd love to get an answer to this and I'd love to use a custom rom.
Are there any other Android 10 roms that I could try?

Sambuca11 said:
I haven't found one yet, I'm going to try go back to Stock as I need my computer to be able to see the tablet to transfer files over. I've tried installing the Legion custom rom and it does the same thing. I'm not sure but I'd love to get an answer to this and I'd love to use a custom rom.
Are there any other Android 10 roms that I could try?
Click to expand...
Click to collapse
I have a work app that need a little more ram: the solution is LineageOs (used 1,2gb vs 1,5gb of the stock rom) and I transfer files through recovery. I tried LegionOS but is full of bugs and file transfer doesn't work the same.

I'm back to stock and my computer and can see my table and the SD card is working fine. Its a shame as I'd love to use LineageOS but for now I'm stuck on stock.

I don’t know what I’m doing wrong so need some help please. I’ve installed TWRP and multidisabler. I’ve wiped the system cache data etc like I was flashing a custom rom.
I’ve downloaded the rom from the links flashed it via system image but I still get the message no os installed rebooted and just a bootloop saying unlocked boot loader press power button to start then nothing no booting image from linageos. Just repeats.
Can anybody tell me or guide me on what I could have done wrong and what what I should being

daljitbanga said:
I don’t know what I’m doing wrong so need some help please. I’ve installed TWRP and multidisabler. I’ve wiped the system cache data etc like I was flashing a custom rom.
I’ve downloaded the rom from the links flashed it via system image but I still get the message no os installed rebooted and just a bootloop saying unlocked boot loader press power button to start then nothing no booting image from linageos. Just repeats.
Can anybody tell me or guide me on what I could have done wrong and what what I should being
Click to expand...
Click to collapse
Mm strange I didn't experience this problem. Like I stated go back to stock and start over. This time don't wipe the system partition.

Thanks for the reply I will try that when I get home later in the day and will post the outcome after.
Are there any other roms the we could also try.

massivekind said:
Mm strange I didn't experience this problem. Like I stated go back to stock and start over. This time don't wipe the system partition.
Click to expand...
Click to collapse
I followed what you said but I’m stilling getting the bootloop for some reason could share links of what rom you downloaded and etc.
Because there must be a mistake in making.
Also to what I’ve been reading is that I need something of treble enabler for the device but I really don’t know.

massivekind said:
Mm strange I didn't experience this problem. Like I stated go back to stock and start over. This time don't wipe the system partition.
Click to expand...
Click to collapse
I finally managed to get LineageOS installed. I just deleted all the files and redone loaded them, returned back to stock and did the whole process all over again.
And it worked. ? ? so maybe somewhere down the line put have been a corrupt download or something.
Custom rom has whole different feeling on the tablet now. Thanks again for tutorial, I’ve been waiting for something like this for a while.
You don’t know of any other roms there out there to try?

daljitbanga said:
I finally managed to get LineageOS installed. I just deleted all the files and redone loaded them, returned back to stock and did the whole process all over again.
And it worked. ? ? so maybe somewhere down the line put have been a corrupt download or something.
Custom rom has whole different feeling on the tablet now. Thanks again for tutorial, I’ve been waiting for something like this for a while.
You don’t know of any other roms there out there to try?
Click to expand...
Click to collapse
You've could try havoc os https://sourceforge.net/projects/ha...v3.5-20200522-Official-a64-ab.img.xz/download
Topic over here, I'm not sure if there are things not working, thats something you'd could figure out
https://forum.xda-developers.com/galaxy-tab-a/how-to/rom-havocos-v3-5-treble-guide-t4108127
I didn't tried this one, but is could be an option

[RECOVERY][TB-X505F][UNOFFICIAL] TWRP 3.6.x for Lenovo Tab M10 HD

This version of TWRP works on the Lenovo TB-X505F (wifi).
For the TB-X505X, see this thread. For the TB-X605F/L, see this thread.
For the TB-X606F/L, see this thread. The X606F/L is the second gen M10 and it uses a Mediatek SOC.
Code:
#include <std_disclaimer.h>
/*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Working:
AFAIK, everything is working including:
data decryption
MTP
Known issues:
time not adjusting for Daylight Saving
OTA (for a workaround see this post)
Before installing TWRP
Before you install TWRP, upgrade your tablet to the Android 9 (Pie) or Android 10 (Q) stock ROM.
This tablet shipped with Android 8 (Oreo), in which the bootloader did not allow unlocking. When you tried to unlock the bootloader, it gave this error message:
Code:
fastboot oem unlock-go
FAILED (remote: 'unknown command')
fastboot: error: Command failed
Installation
It is recommended that you also install Magisk. This will ensure TWRP remains your default recovery.
Step-by-step guide
download TWRP to your PC (see the Download section below)
download magisk.apk to your MicroSD or OTG device. Get the latest Magisk apk file here. Rename the filetype from apk to zip (for example Magisk-v22.0.zip)
if your bootloader is already unlocked, go to step 4. To unlock bootloader:
on tablet: go to Settings->System->About and press "Build number" 7 times to enable Developer Options.
on tablet: go to Settings->System->DeveloperOptions. Turn on: "OEM unlocking" and "USB debugging".
connect tablet to your computer. Tablet will ask for permission to "Allow USB debugging". Tick "always allow" and select "OK".
backup any files you want to keep to an external device (MicroSD/OTG/computer), because the next step will wipe all your photos, files, google account etc on the tablet.
Now unlock the bootloader:
Code:
adb reboot bootloader
fastboot oem unlock-go
fastboot reboot
flash the twrp image:
Code:
adb reboot bootloader
fastboot flash recovery twrp.img
if you haven't loaded Magisk yet, go to step 6. If you have already loaded Magisk, you can just reboot and you're finished:
Code:
fastboot reboot
adb reboot recovery
load Magisk (step one): reboot to recovery. Do not reboot into the system, because it will over-write TWRP with stock recovery. If that happens, go back to step 4 and start again. When you issue the reboot command (below), you have to immediately press the button combination to reboot to recovery (TWRP). Here are the steps:
issue the reboot command:
Code:
fastboot reboot
immediately press and hold all three buttons (Pwr+VolUp+VolDown). The tablet might reboot twice. Release all the buttons when you see the TWRP screen, or hear your PC acknowledge that ADB is connected.
load Magisk (step two): flash Magisk. In TWRP:
select "Install"
use "select storage" to locate device you stored magisk.zip on.
press the OK button
select the Magisk zip file
swipe to confirm Flash
when Magisk is finished, hit the "Reboot System" button
finished!
If you prefer to use button combos, rather than fastboot/ADB commands:
Vol Down + Power = fastboot mode
Vol Up + Vol Down + Power = recovery mode
Changelog
Code:
01/03/2023 - bug fix: data partition again backs up and restores correctly
20/01/2023 - add TW_EXTRA_LANGUAGES and TB_X505F_S001149_221115_ROW kernel (credit to @Tonyha7 )
30/12/2022 - add system partition to AdvancedWipe (TB_X505F_S001147_220830_ROW firmware only)
15/11/2022 - TWRP 3.7.0-0 update
- support for TB_X505F_S001147_220830_ROW
18/12/2021 - TWRP 3.6.0-0 update
- support for A12 decryption (keymaster)
27/03/2021 - TWRP 3.5.1-0 update
- change to landscape mode for tablets
01/01/2021 - TWRP 3.5.0-0: initial release
Downloads
TWRP 3.7.0-0 for X505F: twrp-X505F_11.img (for TB_X505F_S001147_220830_ROW and above)
TWRP 3.6.0-0 for X505F: twrp-X505F_11_2021.img (for earlier stock ROMs)
Source code
https://github.com/minimal-manifest-twrp/platform_manifest_twrp_aosp/tree/twrp-11
https://github.com/Yahoo-Mike/recovery_device_lenovo_X505F/tree/android-11.0
Credits
The guys at TeamWin Recovery Project.
Everyone whose device trees I plagiarised from GitHub.
Contributors
Yahoo Mike
Tonyha7
Last Updated 2023-03-01 (fix /data backup/restore)
Created 2021-01-01

reserved

Thanks for useful post,
Possible to reboot into recovery from fastboot?

zubair1836 said:
Thanks for useful post,
Possible to reboot into recovery from fastboot?
Click to expand...
Click to collapse
Not that I know of. The bootloader accepts the command fastboot reboot recovery, but boots to system anyway.

Hello there, I've been looking how to install this on my slow tablet for almost like an hour. Could there be some tutorial or extended explanation to the process and installation, I'm such a noob, sorry.

This worked for me. Thank you for your effort and the TWRP!

Worked for me too - many thanks!
Can't wait for a custom ROM!
TWRP Recovery Installation Steps
1. Download android platform tools
2. Unlock developer mode on the M10
3. Enable USB debugging on the M10
3. OEM unlock enable on the M10
4. XDA download TWRP copy to sd
5. Download Magisk app (from Github!!! johnwu), change extension to .zip
6. Adb to fastboot
7. fastboot flash recovery [filename.img]
8. Turn off device
9. Turn on device holding all 3 buttons, release when see Lenovo splash screen
10. In TWRP find Magisk zip
11. Install Magisk
Stock ROM Recovery
1. Download qualcomm drivers 64 bit install
2. Download Lenovo recovery and image tool windows app from Lenovo support website
3. Fastboot oem edl
4. Turn off M10
5. Start recovery windows app, wait till instructions
6. Hold volume up (up is the side of the button closest to the front camera) and insert cable
7. Release button after windows app detects device
8. Troubleshoot by checking windows device manager for the M10 appears as a Qualcomm device

I'm thinking about getting one of these tablets, but before I do so I'd like to know that the screen lock still works after installing TWRP.
This might sound like a crazy question, but my Samsung Tab A won't set a screen lock - pattern, PIN or password - once TWRP has been installed, and I'd rather not run into the same issue again.

Heeni said:
I'm thinking about getting one of these tablets, but before I do so I'd like to know that the screen lock still works after installing TWRP.
This might sound like a crazy question, but my Samsung Tab A won't set a screen lock - pattern, PIN or password - once TWRP has been installed, and I'd rather not run into the same issue again.
Click to expand...
Click to collapse
Confirmed working normally.

zubair1836 said:
Confirmed working normally.
Click to expand...
Click to collapse
Many thanks.

Thank you! TWRP is working fine!
Stupid me flashed before I installed the Android 10 OTA, so I had to temporarily go back to stock recovery. Unfortunately beamingbadger's method didn't work for me.
This is how it worked for me:
Download the OTA via Lenovo's "Rescue And Smart Assistant"
The stock recovery image will be in the Download folder (default path: C:\ProgramData\LMSA\Download\RomFiles) called "recovery.img"
Flash the recovery.img the same way as you would with the twrp img (adb reboot bootloader -> fastboot flash recovery recovery.img)
fastboot reboot
Install OTA
Flash TWRP recovery + Magisk again (follow the steps from the first post, skip bootloader unlock)

The method I use to install OTAs is:
open Magisk App
select "Uninstall Magisk", then the "Restore Images" option
reboot to Android (you will have no root access and stock recovery is restored)
apply OTA
re-flash twrp and install Magisk
NOTE 1: if you've unencrypted your data partition, it will be re-encrypted by this process.
NOTE 2: the new Magisk App (v22) can be installed in TWRP by renaming the *.apk to *.zip. See the new install instructions.

What's involved with running gsi ROMs on this device? It's got the same SoC as my Samsung Tab, which runs them well, so I'm assuming that this tab will also, but I'd like to know if there are any traps that I need to be aware of.

I can partly answer my own question. It all went more smoothly than I expected: installing TWRP, Magisk and then LineageOS R Mod //LiR, followed by Disable_Dm-Verity_enfec.zip.
If I want to try other GSI ROMs, do I need to flash stock before trying another one? I've had some trouble doing that (won't boot) and it's possibly to do with encryption.

Heeni said:
I can partly answer my own question. It all went more smoothly than I expected: installing TWRP, Magisk and then LineageOS R Mod //LiR, followed by Disable_Dm-Verity_enfec.zip.
Click to expand...
Click to collapse
That's great news. Well done.
Heeni said:
If I want to try other GSI ROMs, do I need to flash stock before trying another one? I've had some trouble doing that (won't boot) and it's possibly to do with encryption.
Click to expand...
Click to collapse
On my X605F I do this in twrp for a new GSI install:
format (not wipe) data partition. This is the option where you have to confirm by swiping.
factory reset. This clears the caches.
restore the stock boot and vendor partitions (from a backup I made). This is because Magisk can touch these partitions.
install the GSI system image
install anything else I need like disable_Dm-Verity, Magisk, gapps etc
I don't know what LOS R Mod //LiR does to your system. If it touches any other partitions, you should restore those to stock too.

Thanks for that. It gives me something to go on with. I've downloaded the stock ROM from lolinet, so I can grab the boot and vendor images from that.

I was able to try a couple of other GSI ROMs and I've settled on AndyYan's LineageOS 17.1 for now. The only serious installation issue I had - which I can laugh about in hindsight - was thinking I'd got myself into a very bad bootloop, when all I needed to do was let go of the power button after the Lenovo logo appeared.
On this tablet, there is no navigation capability at all (no navbar, no gestures, no setting to configure them) on installation, and I have to set it using adb. I suspect it goes back to PHH basic ROMs, but I don't feel like doing yet another install and testing right at this moment. Is this happening on the other tablets that you're testing, or is it unique to this one?

I just posted the v3.5.1 update to twrp.
It's also changed to landscape mode, as many of you requested.

Quick question, how do i apply new system updates with twrp installed? Should i not bother? Also, i forgot how to block check for updates!

will this allow flashing of stock roms download from lenovo recovery? ive been stuck on an ancient android 9 version because the ota updater fails.