Database Develop

PS Freedom Xperia Walkthrough [UPDATED 2/1/11]

Happy new Year and thank you for yor feedback, I may be late to the party but my work is killing my spare time. So, Iam trying to update the walkrthough to cope with the ongoing developments.
On a side note I've upgraded my xperia to an android device but Iam keeping it for jailbreaking purposes
Lets get it on!
Assuming your device is covered in the compatibility list you have to have the device rooted.
For how to Root (HARD-SPL) Your Xperia X1 check Here!!
Then its a matter of OS, in this thread we are talking about HTC Devices that run WinMo as a native Operating System. This hack works only in Linux enviroment so we need Android to run on the device.
How to run android depends on the particular device so one must go to the respective thread.
For Xperia its this thread
The Froyo Development has stopped but the current version is far superior than what we used some months ago.
In short dowload the xdandroid stuff, put the unrared files on your sd's root and boot through HARET once.
-
We now should be at a point that our device boots normally to The 2.2 froyo android version through Haret. Then we have to replace the module and zImage files with the PSfreedom respective ones plus the psfreedom.ko file. All these should be placed and overriten in the root folder of the SDCard.
Here is the latest Payload for Xperia
(need some help with the changes, but Iam impressed so far with the outcome)
All the preliminary work is done, now for the ****ty "do this everytime you wanna play back ups" job
Assuming the phone is off...
Turn it on
Wait for winmo to boot then run HARET from the device's file manager
Wait till android fully boots and navigate to the menu->DevTools->Terminal Emulator
in the terminal you must enter the following lines...
su(enter)
cd(space)/sdcard(enter)
insmod(space)psfreedom.ko(enter)
Click to expand...
Click to collapse
At this point the phone is ready
Pull out the power cord of the PS3 (or flip the backswitch to off)
insert the phone at the first usb port (preferably with the shortest USB cable you can find)
flip the switch or insert the power cord
wait 3 to 4 seconds
press power on followed quickly by eject
you should hear 3 short blips
it takes 5 seconds for PS3 to boot
and DONE.
if it doesnt succed just repeat the process. if it never suceeds then you don't run @ 3.41 FW
[UPDATE#0] I Updated the PSFreedom Files link from the "Homebrew only" Free version to the Backup Enabled "Full" Version. Still Ver 1.0 though...
[UPDATE#1] It definatly needs 4,5 tries, I cannot get it to work in the first try...
[UPDATE#2] Everytime I try to run a backup my FAT PS3 Freezes... and to think I came this close...
[UPDATE#3] Stupid me, didn't check it out in the above compatibility list... tried another one works like a charm
[UPDATE#4] If you are 100% sure you did everything right and still you cannot perform the exploit on the console you should not turn off the device and boot it again, you can have it in terminal mode as long as you wish and perform the exploit on the PS3 again and again... This is also usefull when the console freezes or crashes, you just perform the power cycle only!!
Well There goes one day of my life I think I covered more than the basics, If you thing I helped you I would appreciate a line or two
[UPDATE#5] Went out today and felt like spending 300 Euros, got my self a Slim one. I will be testing it later today...
[UPDATE#6] I found out that the PS3 Slim model has a much greater success rate for the hack to work. Also, I tried all the steps and bypassed the active sync stuff and I can confirm that by bypassing it, IT WILL NOT WORK
[UPDATE#7] 5 Days into this and 3 with the slim model, slim works better BUT, the problems occure because of the xperia hardware/xdandroid port... it works but not always, its nerve wracking I know, so do the Developers of PS Freedom as they updated their wiki Raphael page page in the problems worning section.
aaaanyway, Tomorow Iam upgrading my HDD my old one is full.
[UPDATE#8] 11 days later and I have updated my fat ps3 to 3.42 and kept my slim hacked. Its a tedious work to enable every time xdandroid and the psfreedom hack but as I said it is free, anyway, having the slim console AND a very short cable (mine is 10cm) works EVERY SINGLE TIME, no probs with that. I had though 2 issues of console freezing... I don't know if it is the hack or my new HDD (7200rpm) nothing serious though...
[UPDATE#9] I've tried to replace the active sync step and connected the device to ps3, first time it worked, second time it failed...
[UPDATE#10] Well, thats it for me, I could no longer cope with the tedious steps in order to play for an hour, I've bought a jailbreak clone and flashed my xperia with a diffrent rom and formatted my SDcard. for the time being, Iam no longer using the Raphael hack...
[UPDATE#11] As it turns out my jailbreak clone is not upgradable (it was damn cheap after all). Anyways, I browsed to PSFREEDOM.com to see the development of the raphael hack and to my surprise i found out two things...
a) This thread is hotlinkedvia this page http://psfreedom.com/wiki/Sony_Ericsson_XPERIA_X1, which is kinda cool I guess...
b) I found out (probably need to read my thread a little bit more ) that more recent hermes payloads are been released for xperia...
So, I will refresh any broken links, start again, and keep updated this first post agains the willings of our beloved sony
[Update#12] The true reason that I returned is that my fat PS3 pulled a YLOD on me and left me empty handed this holiday season, so I dusted off my jailbreaked one
Click to expand...
Click to collapse

I did this process again and again but when ps3 start up nothing happened but top of screen this message appeare that the usb device was unknown

ldghn said:
I did this process again and again but when ps3 start up nothing happened but top of screen this message appeare that the usb device was unknown
Click to expand...
Click to collapse
The same thing happened with me the first few tries, this message means that the process is not right, I solved this issue by re formatting xdandroid again and carefully placing and overrighting the files...
When you are 100% certain that the procedure is right (according to my walkthroug) then its only a matter o timing... keep trying mate.

First time i run android use original the module and zImage file and then replace them with ps fredoom files or from first i use replaced files??

ldghn said:
First time i run android use original the module and zImage file and then replace them with ps fredoom files or from first i use replaced files??
Click to expand...
Click to collapse
I think its very clear that you have to boot on android at least once with the original files....
(the initial install and calibration)

I reinstall android 2 times and this time whne i connect device to ps3 no message about unknown device have been shown but ps3 dont show nothing ( manager.pkg) for install
I dont know what problem's.

ldghn said:
I reinstall android 2 times and this time whne i connect device to ps3 no message about unknown device have been shown but ps3 dont show nothing ( manager.pkg) for install
I dont know what problem's.
Click to expand...
Click to collapse
So you finally done it!!
Under the GAME section on the XMB you should see a new item called "Install Package Files"
take a usb drive and put inside (root) the manager then insert it in the other free usb slot.
Press X at the "Install Package Files" and Install the manager...

Jim P said:
So you finally done it!!
Under the GAME section on the XMB you should see a new item called "Install Package Files"
take a usb drive and put inside (root) the manager then insert it in the other free usb slot.
Press X at the "Install Package Files" and Install the manager...
Click to expand...
Click to collapse
My problem is in step that you said
I connect usb drive with manager in but "Install Package Files" dont be apparent

ldghn said:
My problem is in step that you said
I connect usb drive with manager in but "Install Package Files" dont be apparent
Click to expand...
Click to collapse
Then you didn't do the exploit... back to the drawing board my friend

Thank You soo much! It works on first try

error
so i managed to get android runnig via fatsal.
when i try to follow your terminal instructions it gives me back errors!
so i figured out actually the right comand is cd(space)/sdcard!!!!
but when i try to do the same with endboot it says no such folder!
so i tryed the next step the insmod psfredoom.ko it does something then i connect to my ps3 do the power trick and all but the most that i get on my ps3 is that "an unkwon device is connected" and nothing else! any suggestion?

trinolmf said:
so i managed to get android runnig via fatsal.
when i try to follow your terminal instructions it gives me back errors!
so i figured out actually the right comand is cd(space)/sdcard!!!!
but when i try to do the same with endboot it says no such folder!
so i tryed the next step the insmod psfredoom.ko it does something then i connect to my ps3 do the power trick and all but the most that i get on my ps3 is that "an unkwon device is connected" and nothing else! any suggestion?
Click to expand...
Click to collapse
What I have gathered together in this walkthrough is what many people suggested and some other people including me found usefull and working.
You probably don't have the proper file arrangement in your SD card
and the actual command line is "cd sdcard" to access the sd card and thed "cd andboot" to access the "andboot" folder where the PS Freedom files reside.
hope I helped

trinolmf said:
so i managed to get android runnig via fatsal.
when i try to follow your terminal instructions it gives me back errors!
so i figured out actually the right comand is cd(space)/sdcard!!!!
but when i try to do the same with endboot it says no such folder!
so i tryed the next step the insmod psfredoom.ko it does something then i connect to my ps3 do the power trick and all but the most that i get on my ps3 is that "an unkwon device is connected" and nothing else! any suggestion?
Click to expand...
Click to collapse
hi all,i have the same problems,dont existing the folder"andboot" i creat it ?
thx

hi mr i while insert cd andboot write in terminal can't cd to andboot and while connect to ps3 write an unknwon device is connected please help me thanks

teksound said:
hi all,i have the same problems,dont existing the folder"andboot" i creat it ?
thx
Click to expand...
Click to collapse
yeah. earlier I placed EVERYTHING in the root instead of making a folder called "andboot" so I'm going to do that again and see what I get. I think it's a bad psfreedom.ko file.

People...
When you installed xdandroid on your xperia the guy who made the port said that you have to create an andboot folder to place the android kernel inside...
so by default you have an andboot folder.
then its a matter of overiting 2 files there... simple as that.

Finally i did it
It works for me now

Perhaps i am stupid, but i cannot get it to work. This is how i do it:
Copy the android files to the sdcard and boot it in the phone with the haret.exe (takes a loooong time to boot). Reboot the phone back to WM, copy over the files module and zImage file, boot back into android with haret, startup terminal, write in the commands and so on. I start up the PS3 as instructed but i only get the message unknown USB and I cannot see any install pkg file.
I have tried and read all the instructions but I cannot understand what I am doing wrong, anyone have a tip?

helps needed
i have been trying make it work all day with no luck. mine is a uk version X1 with original rom. i followed instruction step by step and even reinstall the andriod port several times. however, still not working. always appear unknown usb device on ps3 screen. the only thing i didnt do is that flashing the SPL. is it a necessary step? what's the purpose for flashing the SPL?

actually, the module files from android and the one from psfreedom didn't have the same name... is this an issue ? witch name we have to keep ?
thx for the tuto !

i want my phone to connect to pc again! plz help (problem shows after root)

hi
first i most apologize for my bad english
i got a htc tattoo and i tried to upgrade it's rom to one of cyanogen's rom.
it has android 1.6 (original rom)
first i must root the device (by the instruction of the cyanogen team in their wiki)
i do some steps and near the end i dont know what happend ( i was coping the commands of adb to cmd)
then it completed or not i pluged out phone
after that each time i connct the usb to phone it just charge and no connecting to pc (i have windows 7)
i dont know what to do and i need to upgrade the rom
if someone knows what i must do tell me please
i am so new in android and i dont know nearly anything
tnx for ur help

i must also add this
on the starting of pc (turning on) if the phone is connected i see the options for htc sync and removable storage ... but after loading windows it goes away and the phone just charges;
i tried one another pc but ther was no connecting

Turn on Mass storage

george.baskharon said:
Turn on Mass storage
Click to expand...
Click to collapse
i did this but not working
i even did hard reset to phone

Hi AEZ_BEST,
if i have understood well you actually have a stock rom (may be rooted) and htc_sync package installed on pc.
OK, trying this:
go there http://forum.xda-developers.com/showthread.php?t=950759 and download new version of 1-click root for tattoo (which occasionally you can use to easily root tattoo and install CWM recovery):
decompress dowloaded package into c:\rtatto folder
set tattoo to use ADB (android debug bridge) instead of mounting as a removable drive, it's possible but i not remember where the option is (sorry but two years and half that i not have stock rom installed ) and connect tattoo to pc [maybe it ask for ABD when you connect]
open cmd as administrator and issue these two commands
Code:
cd c:\rtatto
adb devices
it should reports you the list of attached devices
if your tattoo is in the list you can lately use adb to push the rom you wanna flash on sdcard.
Ops, i don't know if you have yet installed CWM recovery, if not look here: http://forum.xda-developers.com/showpost.php?p=27174485&postcount=129
bye
yen

_yen_ said:
Hi AEZ_BEST,
if i have understood well you actually have a stock rom (may be rooted) and htc_sync package installed on pc.
OK, trying this:
go there http://forum.xda-developers.com/showthread.php?t=950759 and download new version of 1-click root for tattoo (which occasionally you can use to easily root tattoo and install CWM recovery):
decompress dowloaded package into c:\rtatto folder
set tattoo to use ADB (android debug bridge) instead of mounting as a removable drive, it's possible but i not remember where the option is (sorry but two years and half that i not have stock rom installed ) and connect tattoo to pc [maybe it ask for ABD when you connect]
open cmd as administrator and issue these two commands
Code:
cd c:\rtatto
adb devices
it should reports you the list of attached devices
if your tattoo is in the list you can lately use adb to push the rom you wanna flash on sdcard.
Ops, i don't know if you have yet installed CWM recovery, if not look here: http://forum.xda-developers.com/showpost.php?p=27174485&postcount=129
bye
yen
Click to expand...
Click to collapse
every time i type adb devices in cm i dont get anything. the list is empty. no device attached it says.
and
the adb debgging mode is on.
if i have my phone connected then i can use ur typic (1 click root...)
so iwant to connect my phone first.
plz help

Change your USB cable

Hi AEZ_BEST;
one more try on another PC installing these usb drivers; http://goo.im/tools/drivers/USB_driver_20101122_release.zip
and trying with adb as in my praevious post (btw, when connecting to pc no notification message on tatto at all?)
Edit:
as kemoba say try also with another usb cable, standard mini usb cableshould work too
bye
yen

hi all.
i tried in 2 other pc s . but same resul
finally i reinstalled my windows seven!
then it worked
tnx to all of u

AEZ_BEST said:
hi all.
i tried in 2 other pc s . but same resul
finally i reinstalled my windows seven!
then it worked
tnx to all of u
Click to expand...
Click to collapse
Next time use Ubuntu then
but i use Windows 7 too..never had the problem!

Look on Google play for a 3rd party USB mounter / connecter
Sent from my Desire HD using xda app-developers app

[HELP] I'm lost in the adb world

So my htc one has been a piece of a useless aluminum for the past 4 months when I lost access to recovery.
I have a windows 8.1 computer and no USB 3.0
My htc one does not boot it stays stuck on the htc logo until battery drains. I used to have a recovery image that I was able to access but now every time I try to reboot to recovery it snaps out of it and it reboots again. I CAN go to the bootloader but my computer won't communicate with the device so I can flash a new recovery.
Please ask me if I was unclear about anything but most of all, I need your professional advise please.
I want my htc to come back to life

Ninlour said:
So my htc one has been a piece of a useless aluminum for the past 4 months when I lost access to recovery.
I have a windows 8.1 computer and no USB 3.0
My htc one does not boot it stays stuck on the htc logo until battery drains. I used to have a recovery image that I was able to access but now every time I try to reboot to recovery it snaps out of it and it reboots again. I CAN go to the bootloader but my computer won't communicate with the device so I can flash a new recovery.
Please ask me if I was unclear about anything but most of all, I need your professional advise please.
I want my htc to come back to life
Click to expand...
Click to collapse
I used the Driver Hack here .. i have no problems with adb/fastboot on windows 8.1
here's the file and instructions
http://forum.xda-developers.com/attachment.php?attachmentid=2500592&d=1389122072
HTML Code:
I repeat this is a REALLY DIRTY solution that may harm your system, personal data, hardware and/or cat.
Here are the steps:
0. Have a Linux or Windows LiveCD just in case something goes wrong
1. Download and extract files from attachment
2. Navigate to the folder corresponding to your system version (x86 = 32-bit, x64 = 64 bit)
3. Right-click franken-usb.bat and click "Run as Administrator"
5. Wait for it to finish and reboot the system. If everything went fine, you will boot your system successfully
6. Install ADB/Fastboot drivers just like on Windows 8
7. Connect your phone in Fastboot mode to your USB 2.0 port and check if it works
8. Enjoy and wait for official fix
How does it work:
It's not any kind of magic - it just replaces Windows 8.1's usbhub.sys and usbport.sys with Windows 8's ones.
Old files don't check for BOS descriptor so Fastboot can work.
Script updated - it should now actually copy the files but please double check if files were copied to C:\Windows\system32\Drivers!
Hope it helps you!
Regards!
Click to expand...
Click to collapse
you may also need these drivers
http://www.mediafire.com/download/j55vk6qbbr6250c/HTCDriver_4.8.0.002.exe

Oh dear lord IT WORKED!! I can't thank you enough !!!

Ninlour said:
Oh dear lord IT WORKED!! I can't thank you enough !!!
Click to expand...
Click to collapse
Yes sir .. your welcome

[Q&A] [ROM] HUAWEI Ascend W1-U00 | v1.00

Q&A for [ROM] HUAWEI Ascend W1-U00 | v1.00
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

DerSchorsch1 said:
It seems that in this video it's described, how the sdcard-problem can be permanently solved, so that we don't have to put the card out and in after a shutdown. Is this right?
Can this be implemented in the rom?
I don't understand the steps to do in the video. I can only recognize that i has something to do with visual studio. Can someone describe it more detailed?
---------- Post added at 07:25 PM ---------- Previous post was at 07:22 PM ----------
Everyone please donate, so he can buy a new gorilla glas display!
Click to expand...
Click to collapse
You did notice that this is an emulated device I hope? Rules for an emulator and for a live device are usually different.. just because a fix works in the emulator it doesn't have to work with the device.. and as far as I'm aware it doesn't.

Carrier Lock
Hi there,
Thanks for the ROM dev work!
I have a W1 which was O2 branded, after the procedure of installing the ROM, my phone has become carrier locked..
Is there an option I missed during install?
Regards,
Ed

I need help
Hello, I also use the HUAWEI Ascend W1 I come from China, I would like to know about the method of making the rom, and I open the app file will get a mbn file and do not know how to proceed, and I'm very interested in this, you can explain under it? (My English is not very good, but please forgive me use google) If you teach me, would be extremely grateful!

Hello,
thanks WojtasXda for the effort!
---------- Post added at 08:19 AM ---------- Previous post was at 08:13 AM ----------
It will be possible to install the rom from Osx or linux?

Registry tweaks from russian forum (4pda)
Here, guys, tweaks for our HUAWEI W1.
Go to \Windows\Packages\RegistryFiles and place OEMSettings.reg here.
First bootup will be ~2 minites.
Tweak list:
-Camera sound on/off in sound settings;
-Wi-Fi connection sound on/off;
-3g/Wi-Fi arrows in status bar switched on;
-Activated PfD (don't install program);
-Jailbreak(interop unlock,capabilities unlock)
-Can be installed hacked appx's from wp-seven
-SDK registered
-Search button opens google
-Any app can be placed to camera's button (e.g. OneShot)
-Now you have Nokia Lumia 920 (doesn't really work).
To make your phone 'NL920', you must mount in regedit 'SYSTEM' and install 2nd (zip). After that, you can easily install all Nokia Exclusives via SysApp Pusher (also, more apps in store!).

I think you've got a typo in the OEMSettings.reg file (inside the same-named archive), on one of the tweaks that's supposed to give file system via USB:
Code:
[HKEY_LOCAL_MACHINE\SYSTEM\controlset001\services\MtpSvn]
should be
Code:
[HKEY_LOCAL_MACHINE\SYSTEM\controlset001\services\MtpSvc]
unless it's supposed to control the Media Transfer Protocol Subversion

Will this work with Huawei Ascend W1-U00 from Globe PH plan?
Hi.
My phone was given to me by my mother who received it with her Globe (a Philippine mobile network service provider) postpaid plan (which unusually uses prepaid services). I've been frustrated with this phone's storage becoming full very easily even though I only have very few apps (except for Spider-Man Unlimited which downloaded a 200-MB DLC) installed and I don't put any files in the phone storage. Since Huawei seemingly abandoned their Windows phones, there's no hope of us getting any update so we're stuck with the stock WP8 update 1. Will this custom ROM work with this particular W1-U00? Does anyone know where I can get a stock ROM for this particular phone?
Name: Windows Phone
Model: HUAWEI W1-U00
Software: Windows Phone 8.0
Screen Resolution: 480x800
OS version: 8.0.10211.204
Firmware revision number: 1030.5614.29400.20500
Hardware revision number: HD1U8835M Ver.B
Chip SOC version: 8230

WojtasXda said:
Hello everyone !
I have new W1, but this is U34 version. Anyone tried flashign this model? Acctually QPST shows error "Cookie (if present) not received.
Click to expand...
Click to collapse
I have the U34 and I've not been able to flash it. I always get the same cookie error in QPST, and handshake failure error in WP8 Flash Tool.
I hope you will be able to find the way to flash the U34.

You need install Windows 7, Use Qemu or Vmware. Drivers from package with QPST doesnt works in W8.
Click to expand...
Click to collapse
That's not true at all. QPST works perfectly fine on Windows 8. The only issue is if you're running a x64 OS, in which case you need to run the QPST programs as admin.

Is this ROM only in English language?

Problems with Flashing
Hello!
At First thanks for the good work. I will donate it, if i getting it work for me.
I got some Problems with flashing.
1) With Flash Tool:
Diag Setting is on, Phone is resetted and with the Flashtool i get the "Firmware Handshake Fail"-Error.
2) With QPST i can get into Download Mode (Qualcomm ... 9008) but then it shows me a "Cookie not received"-Error.
I tried the Flashtool in Downloadmode but that doesnt recognize my device.
My PC-Config:
Windows 7 Ultimate 64-Bit
Intel i5 Notebook
My Handy-FW:
Huawei W1-U00 Simlock Free
OS Version: 8.10.14203.306 Developer Preview
Thank you very much!
Edit:
I got the Problem. It only works for me without Diag Settings and only with QPST.
The folder from the Repair Bootloader was: W1-U00 Repair bootloader/flashing/
and i only copied the "flashing" folder. Now no "Cookie"-Error.
Hope this helps someone....

Step 2 error
I finish step 1. Flash custom ROM with QPST (Windows 8.1 x64).
Phone in mass-storage mode (all disk available).
Qualcomm MMC Storage USB Device present in Device manager.
When run WP8CRUU get error: Cannot open device "Qualcomm MMC Storage USB Device" Error 5 .
Whats wrong?
Problem solved:
With phone connected as mass storage reinstall Qualcomm USB drivers!

Lag issue on the scroll
Hi @WojtasXda, I installed this wonderful ROM yesterday and everything is working perfectly THANK YOU SO MUCH <3
but when I scroll something with the finger always placed in the screen it lags a bit.
Huawei Ascend W1-U00
If you could help me to find a fix I thank

Error 109 on WP8CRUU.exe
Does v1.10 require v1.00 flashed first? I'm getting an error 109 (Cannot open device Qualcomm MMC Storage USB Device) when I run WP8CRUU.exe. My phone's (W1-U00) already in mass storage mode.
Now, I'm getting an error 5 (Cannot open device Qualcomm MMC Storage USB Device).
Can anyone please help me with this? I was able to flash the ROM with mass storage mode capability and set my phone to mass storage mode. Now, I can't flash the custom ROM because of this error. I don't think I missed anything. I'm running this on a Windows 7 Ultimate 64-bit. I didn't install MS Visual Studio 2013 since it requires Windows 8.1. I did install the Qualcomm USB drivers, simpleio, and QPST. I have MS Visual C++ 2005, 2008, and 2012 (all 32-bit) installed.
Arhy's workaround didn't work for me, by the way.

personal settings/data
Hi everybody,
is there a possibility to flash the rom and still keeping the wp8 personal settings (like contacts, certificates, calendar arrangements,...)
Or is it possible to do a "backup" of personal data in wp8 and do restore in wp8.1 ?
Any hints welcome.
BTW
Thanks for the rom and the hard work...

blonder_andi said:
Hi everybody,
is there a possibility to flash the rom and still keeping the wp8 personal settings (like contacts, certificates, calendar arrangements,...)
Or is it possible to do a "backup" of personal data in wp8 and do restore in wp8.1 ?
Any hints welcome.
BTW
Thanks for the rom and the hard work...
Click to expand...
Click to collapse
Try going to Settings -> backup.

tempname said:
Try going to Settings -> backup.
Click to expand...
Click to collapse
Thanks for the reply...
As far as is can see you just can backup fotos, messages, and IE-settings.
(no contacts, calender-information, certificates,...)
Is there another way to get at least my contacts from WP8 to WP8.1?
An additional question:
Is it possible to get back to WP8 after flashing the WP8.1 rom?
Any hints welcome
best regards
andi

install HUAWEI Ascend W1-U00 | v1.10
Hi, i try to install these rom.
To install that i do this steps:
1) Enter Qualcomm emergency mode
2) Click Start>All Application>QPST>QPST Configuration and configure phone
3) Start>All Application>QPST>eMMC Software Download，Click “Load Build Contents…” Select contents.xml in unrared W1-U00(C00)Repair bootloader.rar，Check "Program Boot Loaders",UnCheck "Program MMC device", Click Download
4) After complete, the port will change into Qualcomm HS-USB Diagnostics 9006
5) UnCheck Program boot loaders，Check Program MMC device，Select Qualcomm MMC port，Click Download again.
6) Wait for it to complete, disconnect phone.
7) Press and hold "vol -" then also press and hold Power button and connect the phone to the computer, now the device manager will display WP8 UEFI USB SimpleI/O Port.
8) Run Flash Tool , select ROM file / Config XML and click "Scan && Download".
9) When phone displays 100%, and the inscription OK. The process of flashing rom is complete. Now you need Reset the phone (press power button on 15 sec or remove battery). Flash tool displays information about the bad file FFU, just ignore it
10) Run device in mass storage mode
11) Run WP8CRUU.exe... BUT
No instrunction, only black console. when i close the console the copy begin.. but stop at 45% with "Error: cannot write 5 file. Error 5"
Suggestion?
SOLVED: must be waiting on the black console

I can not find Data\\PROGRAMS\\WINDOWSAPP directory，how can I get full FS access ？

Teclast X80 Pro (E3E6) Dual OS (Win10/Android 5.0): Remove Windows

Hey guys. Sorry to bother you in the X98 section, but since there's no section for the X80 yet and maybe the devices have some similarities, I hope it's ok.
The tablet worked fine, but to remove any possible bloatware under Windows or Android, I reset Windows. Somehow the device must have crashed (low battery?) and now I can't boot to Windows anymore (black screen and / or boot loop). Of course I made no backup / recovery disk. Android still works fine and I still get into BIOS / UEFI.
I tried reinstalling Windows via OTG with USB stick. I got to the point where I can choose a partition. Problem is, there are lots of partitions (Android, recovery, System and so on). I located the Windows partition, formatted / deleted it and tried to reinstall Windows on this partition. Just the exact way I would do it on a PC. Somehow it won't install on this partition. The error message says something about "the partitions are not in the recommended order. Further information for installation on GPT-volumes..." (I don't know the exact English phrasing because everything is in German). I chose "continue anyway". Then I get the message that "the EFI-system is not formatted in NTFS. Format the partition to FAT32 and start install procedure again". I press ok and get back to Windows Setup (Install now).
I also tried different repair and recovery options. One time I got error code 0xC0000034. Funny thing is, Windows still seems to be there because while trying to repair / recover I tried to load some drivers and could see the hard drives and folders under Windows.
I tried downloading the original roms here: http://pan.baidu.com/s/1qYEa8gc
You need a Baidu account for the larger files and after days and days I gave up to create such an account as it seems to work only with a mainland China number. There's an option for oversea mobiles but that's not working. I tried a QQ-account, but Baidu wants to link with it and you need that telephone number again. So apparently there's no way to get the original files that way.
I found some stuff here: http://www.needrom.com/download/teclast-x80-pro-dualboot/ but that's only a tutorial file in Chinese and some flash programms / drivers (also got them from Baidu - smaller files are possible to download without an account).
Long story short: I guess recovering Windows 10 is too much effort, so I want to make the tablet Android only and of course want to use the whole capacity for Android. I found a thread on reddit about removing Windows on the X98: https://www.reddit.com/r/teclast/comments/479eua/teclast_x89_how_to_remove_windows_10/
But I have no idea which partitions are definitely needed for Android and which ones I can safely delete. I found a partition map here: http://wheresmykeyboard.com/2015/08/teclast-x98-air-64gb-dual-boot-default-partition-map/ but that doesn't help me that much because they look different.
Attached you will find a photo of all the partitions on my device. I guess there are some which were created during the failed Windows installation because I had about 20 GB free space and now only 17.7 GB.
So is there anybody out there who knows if it's possible to remove Windows completely and which partitions I have to delete?

Did you ever figure this out? I just bought an X80 Pro and was thinking of doing something similar since I plan on making it an android-only tablet.

Deathgazer said:
Did you ever figure this out? I just bought an X80 Pro and was thinking of doing something similar since I plan on making it an android-only tablet.
Click to expand...
Click to collapse
Hi. Sorry for the late replay. Yes, I figured it out and my X80 Pro is now running Android-only with 32 GB. In the end, it wasn't that hard but a long way to success.

metalaxi said:
Hi. Sorry for the late replay. Yes, I figured it out and my X80 Pro is now running Android-only with 32 GB. In the end, it wasn't that hard but a long way to success.
Click to expand...
Click to collapse
Please do describe how you achieved Android-only with 32 GB memory
Cheers

metalaxi said:
Hi. Sorry for the late replay. Yes, I figured it out and my X80 Pro is now running Android-only with 32 GB. In the end, it wasn't that hard but a long way to success.
Click to expand...
Click to collapse
Yes please tell us how metalaxi , it'll be much appreciated.:good:

Ok, guys. Since some of you are asking how I did it, I'm going to try to explain it. It's kinda embarrassing that I don't remember the exact way but I hope it helps somehow. I used the tutorial from this site: http://techtablets.com/forum/topic/x80-plus-android-os-only/#login
Even though it's supposed to be for the Plus model, it also worked on the Pro. Btw, the guy Alex in that thread is me .
You can download all the files from my Google Drive here: https://drive.google.com/open?id=0BxEFqy4Rt9w_cnh3VG9ySk5sOHM
You need
- Android5.1 Upgrade Tool.rar
- X80 Pro (E3E6)- Dual OS - Android5.1-V1.04 Firmware.rar
- gpt.rar (Credit goes to Allember @techtablets-forum; hope it's ok to spread the file)
First you have to install the flash tool. Unrar the firmware and replace the gpt.bin. Then flash the firmware by checking BLANK.
Problem is that when I did all that, my Windows was already crushed and wasn't working anymore. I can't remember anymore if I erased the Windows partitions or any others beforehand. If you're not interested in Windows anymore, just flash it without changing or erasing any of the partitions. I guess by replacing the gpt-file, you do all that automatically.
I hope this somehow helps you. Feel free to ask for more help.
Have a good night!

metalaxi said:
Ok, guys. Since some of you are asking how I did it, I'm going to try to explain it. It's kinda embarrassing that I don't remember the exact way but I hope it helps somehow. I used the tutorial from this site: http://techtablets.com/forum/topic/x80-plus-android-os-only/#login
Even though it's supposed to be for the Plus model, it also worked on the Pro. Btw, the guy Alex in that thread is me .
You can download all the files from my Google Drive here: https://drive.google.com/open?id=0BxEFqy4Rt9w_cnh3VG9ySk5sOHM
You need
- Android5.1 Upgrade Tool.rar
- X80 Pro (E3E6)- Dual OS - Android5.1-V1.04 Firmware.rar
- gpt.rar (Credit goes to Allember @techtablets-forum; hope it's ok to spread the file)
First you have to install the flash tool. Unrar the firmware and replace the gpt.bin. Then flash the firmware by checking BLANK.
Problem is that when I did all that, my Windows was already crushed and wasn't working anymore. I can't remember anymore if I erased the Windows partitions or any others beforehand. If you're not interested in Windows anymore, just flash it without changing or erasing any of the partitions. I guess by replacing the gpt-file, you do all that automatically.
I hope this somehow helps you. Feel free to ask for more help.
Have a good night!
Click to expand...
Click to collapse
Hi @metalaxi. Do you think its possible to like "reverse" and use the same files to remove Android instead and maintain the Windows 10? Appreciate to hear from you. Thanks!

Do we have to change the gpt before doing what you said in your PDF? Or I have just to follow your PDF?

Hi guys, got mine a few months and want to get rid of the Windows part, but the instructions are insufficient for a joker like me.....
1. Download the firmware, its 4 parts of rar being zipped together
2. flash the firmware HOW?!?!?! I have no Idea...... please give us some closer instructions.

reycharlesconrad said:
Hi @metalaxi. Do you think its possible to like "reverse" and use the same files to remove Android instead and maintain the Windows 10? Appreciate to hear from you. Thanks!
Click to expand...
Click to collapse
Sorry, I can't answer that sufficent enough. As far as I know, you can just delete all partitions except the ones from Windows. Then format the unallocated space and merge it with the one from Windows. No guarantee!

dirkzelf said:
Hi guys, got mine a few months and want to get rid of the Windows part, but the instructions are insufficient for a joker like me.....
1. Download the firmware, its 4 parts of rar being zipped together
2. flash the firmware HOW?!?!?! I have no Idea...... please give us some closer instructions.
Click to expand...
Click to collapse
1. Which 4 parts do you mean?
2. To flash any firmware, you need to install all the upgrade tools:
IntelAndroidDrvSetup1.5.0
iSocUSB-Driver-Setup-1.2.0
PhoneFlashTool_5.3.4.0_internal_win32

metalaxi said:
1. Which 4 parts do you mean?
2. To flash any firmware, you need to install all the upgrade tools:
IntelAndroidDrvSetup1.5.0
iSocUSB-Driver-Setup-1.2.0
PhoneFlashTool_5.3.4.0_internal_win32
Click to expand...
Click to collapse
it's too long ago, so I don't know what I exactly did there, but since there was no reply for a long time, I just took a shot and worked out well, now I have an Android only tablet.
I just got lucky I guess....

partition help
Hi, please help.
I have x80pro e3e8
I managed to erase a complete disk partition.
You are trying to revive again, fail.
installed here:
iSocUSB-Driver-Setup-1.2.0
IntelAndroidDrvSetup1.5.0
PhoneFlashTool_5.3.4.0_internal_win32
downloaded here:
Firmware (20161020_SZ)
Tablet joined and tried to flash.
* failed - failed loadet.efi
Please help. I can not download from Baidu
* If I use phoneFlasTool and flash a blank disc - Create Flash partition and dual boot and replace recovery?
What to do with an empty disc?
Thanks for any advice

It is not so hard. By mine it was only trial and error. Installiert all drivers an go in the bootloader with three Finger method. Go two levels up and go into bootloader. Then connect to PC and look in Intel flashing tool if connection is reconiced correctly. Select the downloaded file and select flash. Thats it. Device will reboot and you are ready to go.

theone0987654321 said:
It is not so hard. By mine it was only trial and error. Installiert all drivers an go in the bootloader with three Finger method. Go two levels up and go into bootloader. Then connect to PC and look in Intel flashing tool if connection is reconiced correctly. Select the downloaded file and select flash. Thats it. Device will reboot and you are ready to go.
Click to expand...
Click to collapse
Thank you for the advice. That's right, I did it was marked. I found a reason. rom file was saved on desktop, and had a long name (as I downloaded it) It must copy the file to C've renamed the firmware. Everything went alright. I downloaded and used the GPT files for resizing disk and now goes all right. Thank you for responding to my question.

hi, I have problem while flashing.
Phone flash tool always gives ERROR
Automatic reboot is not supported on this device, please reboot the device manually
ERROR : [Port 0/1/4] Failed to reboot the device
Click to expand...
Click to collapse
Any idea what to do? I followed all the steps, tried many times, still same problem. And it's not possible to reboot device manually, because then it lose connection with PC

Restock OS Without Android
Hi there.
I have to restock my Device, but the Intel Flash Tool does not recognize my Device.
I cannot boot into Android to turn on USB-Debugging or go into fastboot mode
How do i flash my device without any OS installed?
---------- Post added at 04:03 PM ---------- Previous post was at 03:52 PM ----------
affe2000 said:
Hi there.
I have to restock my Device, but the Intel Flash Tool does not recognize my Device.
I cannot boot into Android to turn on USB-Debugging or go into fastboot mode
How do i flash my device without any OS installed?
Click to expand...
Click to collapse
Ok, got it working... dnx fastboot mode is there

....

hello guys by accident i deleted windows 10, how can i reinstall them? i dont have the windows 10 icon in the dual boot select i only see the android icon

mike mike baby said:
hello guys by accident i deleted windows 10, how can i reinstall them? i dont have the windows 10 icon in the dual boot select i only see the android icon
Click to expand...
Click to collapse
Straightforward if you can obtain a USB stick capable of storing over 7GB (some 8GB sticks may not); USB hub (ideally a powered hub); USB keyboard; OTG cable.
1) Obtain the Windows files of the correct firmware. The procedure outlined here is for E6E9 firmware, but other firmware will be similar. Download the circa 6.5GB E6E9 firmware Windows files from https://yadi.sk/d/XEvRsoiD3Q4vKX or https://mega.nz/#F!I0AXGR5C!YiNFkZL9DIvzepH28qAjEQ (or from appropriate source for your firmware version).
Decompress the downloads as required to obtain six folders and two files.
2) Format the stick to FAT32.
3) Name the stick WINPE (five uppercase characters).
4) Copy the previously mentioned folders and files to the USB stick.
5) Plug USB stick and USB keyboard into hub; plug hub into OTG cable; plug OTG cable into tablet whilst the tablet is off.
6) Turn on tablet and immediately start tapping << Delete >> key on USB keyboard. This should open the UEFI config section prior to Android boot option. If the tablet displays the Android boot option, turn off the tablet, wait a few seconds, then turn on and start tapping << Delete >> key on USB keyboard again.
7) When in UEFI, touch the title menu option of << Save and Exit >> and look in the << Boot Override >> section for the name of your USB stick, then touch the name of your USB stick. The screen will immediately go blank as the tablet starts to boot from the USB stick.
8) After a few minutes, a numerically display of progress will be displayed in a CMD window.
9) After reaching 100% and nearing completion of the overall installation, the tablet will prompt for acceptance, so accept that prompt.
10) The setup will run a few final operations for a few seconds, then automatically reboot.
11) Done.
You will be prompted to complete the OOBE on each Windows boot until you complete OOBE.