Hi everyone,
i've the phone can only go into eRecovey and fastboot. I think that the corrupted file is oeminfo.bin, bacause i was replaced with file explorer to have the exact version of the firmware.
Recovery i've tried to download by wifi the firmware, but when install return with authentication info failed error red exclamation dot. I've tried with full wipe but after reboot it return into eRecovery.
Into fastboot return with FAILED (remote: Command not allowed).
Bootloader after update was began locked and i cannot unlock, so TWRP is cutted out.
There's some method to flash the .img system etc like odin for samsung?
i've also the old version of oeminfo.bin on my PC, if i have a method to flash it trough ADB, but i don't know how to unbrick.
Thanks
frencisis said:
Hi everyone,
i've the phone can only go into eRecovey and fastboot. I think that the corrupted file is oeminfo.bin, bacause i was replaced with file explorer to have the exact version of the firmware.
Recovery i've tried to download by wifi the firmware, but when install return with authentication info failed error red exclamation dot. I've tried with full wipe but after reboot it return into eRecovery.
Into fastboot return with FAILED (remote: Command not allowed).
Bootloader after update was began locked and i cannot unlock, so TWRP is cutted out.
There's some method to flash the .img system etc like odin for samsung?
i've also the old version of oeminfo.bin on my PC, if i have a method to flash it trough ADB, but i don't know how to unbrick.
Thanks
Click to expand...
Click to collapse
Run these commands in fastboot and report back
fastboot oem get-product-model
fastboot getvar vendorcountry
danifilth4king said:
Run these commands in fastboot and report back
fastboot oem get-product-model
fastboot getvar vendorcountry
Click to expand...
Click to collapse
Thanks, the resuls are:
C:\adb>fastboot devices
LCL0218428003429 fastboot
C:\adb>fastboot oem get-product-model
...
FAILED (remote: FAIL)
finished. total time: 0.006s
C:\adb>fastboot getvar vendorcountry
getvar:vendorcountry FAILED (remote: cannot get vendorcountry in oeminfo)
finished. total time: 0.011s
C:\adb>
frencisis said:
Thanks, the resuls are:
C:\adb>fastboot devices
LCL0218428003429 fastboot
C:\adb>fastboot oem get-product-model
...
FAILED (remote: FAIL)
finished. total time: 0.006s
C:\adb>fastboot getvar vendorcountry
getvar:vendorcountry FAILED (remote: cannot get vendorcountry in oeminfo)
finished. total time: 0.011s
C:\adb>
Click to expand...
Click to collapse
As your normal eRecovery method isn't working you could try using the FunkyHuawei eRecovery method to flash firmware but you'd have to pay for credits and there's no guarantee it would work. Problem is knowing which firmware to choose as we don't know if your rebrand was successful.
You could try a firmware that matches what your model and region of your phone was originally and if that doesn't work try the firmware meant for the model/region you were trying to rebrand to?
Other than that I'm out of ideas if you can't unlock your bootloader :/
danifilth4king said:
As your normal eRecovery method isn't working you could try using the FunkyHuawei eRecovery method to flash firmware but you'd have to pay for credits and there's no guarantee it would work. Problem is knowing which firmware to choose as we don't know if your rebrand was successful.
You could try a firmware that matches what your model and region of your phone was originally and if that doesn't work try the firmware meant for the model/region you were trying to rebrand to?
Other than that I'm out of ideas if you can't unlock your bootloader :/
Click to expand...
Click to collapse
I've tried to contact Funky Huawei, but they answered to me that: "Unfortunately in your situation recovery might not be possible".
So the last one is to try with warranty into Huawei service.
I hope they could repair it with less money as possible. Maybe they will replace the main board or just re flash he firmware with special method?:crying:
not possible to flash firmware in downloade mode?
mrt box
elvis87 said:
mrt box
Click to expand...
Click to collapse
Have you seriously just answered a 2 years old thread?..
Dude, I have the same problem with a P20 Pro since january!
Usb-c pendrive with proper firmware did the trick for me last time. Nothing else worked. Erecovery is useless crap.
deucecorp said:
Usb-c pendrive with proper firmware did the trick for me last time. Nothing else worked. Erecovery is useless crap.
Click to expand...
Click to collapse
Can I pm you for details?
Related
Hey guys, I did something really stupid.
I acquired an Atrix HD through a third party, network/sim unlocked it to work on T-Mobile, and tried to flash 4.1.2 Mexican Retail (MB886_niimx-user-4.1.2-9.8.2Q-50_MB886_NII_TA-2-16-release-keys-NII-MX) through RSD Lite 6.1.5 after removing the getvar command and.. it failed half way. I forgot to unlock the bootloader before flashing.
Now I'm stuck and I've tried almost everything to fix it. I've searched Google and XDA, in the process I have downloaded Myth Tools, sirhoover_atrixhd_utility, motochopper, motopocalypse, and moto-fastboot, tried them all to the best of my knowledge and nothing is working. I've even edited the XML file to exclude the files it fails on.
Common errors I encounter:
Fastboot reason: Boot failure
Fastboot reason: Flash failure
Partition (boot) Security Version Downgraded
Preflash Validation Failed for boot
Partition (system) Security Version Downgraded
PIV black validation for system failed
Invalid PIV image: system
Worst part is, I can't unlock my bootloader because I need ADB to do so! Recovery will give me ADB but only to sideload (available on certain recoveries I've managed to flash). If you have any ideas or information that could assist me in getting my phone back to normal, whether that's unlocking the bootloader through fastboot or flashing a stock rom sucessfully, I would greatly appreciate it! :good:
You don't need a unlocked bootloader to flash firmware through rsd.. Try flashing the stock att back.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
You don't need a unlocked bootloader to flash firmware through rsd.. Try flashing the stock att back.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
Thanks for your reply
I've tried flashing several stock firmwares already, I get preflash validation failed errors every time on boot.img and system.img
Here's the firmwares I have downloaded:
MB886_niimx-user-4.1.2-9.8.2Q-50_MB886_NII_TA-2-16-release-keys-NII-MX
MB886_bell-user-4.1.2-9.8.2Q-8_MB886_FFW-11-4-release-keys-BellMobility-CA
MB886_att-user-4.1.1-9.8.0Q-97_MB886_FFW-20-27-release-keys-ATT-US_BuildA
7.7.1Q-144_MB886_MR1-22_SIGNED_CFC
7.7.1Q-115_MB886_FFW-14_SIGNED_CFC
I wish I knew exactly the version I had before I started flashing, but unfortunately I do not..
DaveTheRave said:
Thanks for your reply
I've tried flashing several stock firmwares already, I get preflash validation failed errors every time on boot.img and system.img
Here's the firmwares I have downloaded:
MB886_niimx-user-4.1.2-9.8.2Q-50_MB886_NII_TA-2-16-release-keys-NII-MX
MB886_att-user-4.1.1-9.8.0Q-97_MB886_FFW-20-27-release-keys-ATT-US_BuildA
7.7.1Q-144_MB886_MR1-22_SIGNED_CFC
7.7.1Q-115_MB886_FFW-14_SIGNED_CFC
I wish I knew exactly the version I had before I started flashing, but unfortunately I do not..
Click to expand...
Click to collapse
Once your phone's OS has been upgraded, I don't think you can flash to an older firmware unless you have an unlocked bootloader. I'm not sure but that maybe the reason you're getting validation errors.
Did you try re-downloading the firmware?
audit13 said:
Once your phone's OS has been upgraded, I don't think you can flash to an older firmware unless you have an unlocked bootloader. I'm not sure but that maybe the reason you're getting validation errors.
Did you try re-downloading the firmware?
Click to expand...
Click to collapse
Just tried re-downloading everything on a brand new Windows install on a different computer, still having problems.
No matter how hard I try, I cannot get boot.img or system.img to flash from any Stock firmware, whether it's AT&T, Mex, or Bell
Using snap-fastboot:
snap-fastboot flash boot boot.img
sending 'boot' (10240 KB)...
OKAY [ 0.788s]
writing 'boot'...
Preflash validation failed
FAILED (remote failure)
snap-fastboot flash system system.img
sending 'system' (30720 KB)...
OKAY [ 2.343s]
writing 'system'...
Preflash validation failed
FAILED (remote failure)
I'm going to try making a Motorola Factory cable in the meantime. Any other suggestions?
EDIT: Factory cable didn't help.. is there a way to generate a higher security version? No matter what, the bootloader always displays Partition (boot/system) Security Version Downgraded
I really don't want this to end up being a paperweight
Is this where you got the firmware: http://sbf.droid-developers.org/dinara/list.php ?
Did you reboot each time you loaded a different set of fastboot files? Did you remove the previous fastboot files before installing a new set of fastboot files? Are you able to try this on a different computer?
I just got a new Atrix HD replacement and its showing firmware of 9.8.0Q-97_MB886_FFW-20 . Its not the same as the firmware available here: http://sbf.droid-developers.org/ .... I get the same error even after modifying the XML file in the SBF. Wonder if the last update caused an issue. Running into some similar issue with the replacement. Its not wanting to bootloader unlock.
Did you mount the system before installing?
Sent from my SAMSUNG-SGH-I537 using xda app-developers app
Found a fix for the AP Fastboot loop
List of commands to type in. ( in order)
1. adb reboot bootloader
2.fastboot oem fb_mode_set
3.fastboot oem fb_mode_clear
3.fastboot erase userdata
4.fastboot erase cache
5.fastboot reboot
Source:http://www.droidrzr.com/index.php/topic/17320-sticky-bit-fastboot/
Sorry I've been MIA, been busy with work.
TabascoTX said:
Found a fix for the AP Fastboot loop
List of commands to type in. ( in order)
1. adb reboot bootloader
2.fastboot oem fb_mode_set
3.fastboot oem fb_mode_clear
3.fastboot erase userdata
4.fastboot erase cache
5.fastboot reboot
Source:http://www.droidrzr.com/index.php/topic/17320-sticky-bit-fastboot/
Click to expand...
Click to collapse
Thanks for the reply! I wished this worked for me. After completing the steps successfully, I get:
Partition (boot) Security Version Downgraded
Fastboot Reason: Boot Failure
Code:
adb reboot bootloader
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
fastboot oem fb_mode_set
...
OKAY [ 0.006s]
finished. total time: 0.006s
fastboot oem fb_mode_clear
...
OKAY [ 0.005s]
finished. total time: 0.005s
fastboot erase userdata
erasing 'userdata'...
OKAY [ 3.095s]
finished. total time: 3.095s
fastboot erase cache
erasing 'cache'...
OKAY [ 1.669s]
finished. total time: 1.669s
fastboot reboot
rebooting...
finished. total time: 0.005s
audit13 said:
Is this where you got the firmware: http://sbf.droid-developers.org/dinara/list.php ?
Did you reboot each time you loaded a different set of fastboot files? Did you remove the previous fastboot files before installing a new set of fastboot files? Are you able to try this on a different computer?
Click to expand...
Click to collapse
That's exactly where I got my firmwares from. And to answer your question, I have tried this on different computers but I wasn't doing much rebooting when changing fastboot files.
DaveTheRave said:
...I have tried this on different computers but I wasn't doing much rebooting when changing fastboot files.
Click to expand...
Click to collapse
Try logging off and back on to see what happens. For me, using fastboot/adb commands on an x86 Win7 machine works more consistently than using an x64 Win7 machine.
TabascoTX said:
Found a fix for the AP Fastboot loop
List of commands to type in. ( in order)
1. adb reboot bootloader
2.fastboot oem fb_mode_set
3.fastboot oem fb_mode_clear
3.fastboot erase userdata
4.fastboot erase cache
5.fastboot reboot
Source:http://www.droidrzr.com/index.php/topic/17320-sticky-bit-fastboot/
Click to expand...
Click to collapse
When I run fastboot oem fb_mode_set, it just says "< waiting for any device >"
Sorry for the late reply. make sure you have adb installed and the drivers for the Atrix. Also,if possible and not in a boot loop or stuck in fastboot, device debugging should be enabled.
Boot problem
Hello here I have a problem and I made everything from my knowledge but It's not fixed.
I have a Motorola Droid Maxx X8 verison XI1080, version 4.4.4, built number SU4.21,
If I install or do something and I switch off and I turn on my phone it disappears as if it is never done and if I try to reinitialize the phone I have a error Fastboot Reason: Boot Failure
If I get the fastboot and I take recovery its said Boot up failed.
I did everything I flashed with RSD and I update it with Motorola update but still nothing we see that the flashing and the update works but on reboot Its has no effect on the phone its stays as if you did nothing.
Please help me! I look forward to a solution, I thank you more.
have u solved the problem
Please explain how u have solved the problem ,my moto g4 plus in same problems
I have decided to post a new thread as all the other threads on this are not for my phone.
I try to do what bootloader says which is 'fastboot oem lock begin' but I get stuck.
It says afterwards:
Code:
...
<bootloader> Ready to flash signed images
OKAY [ 0.476s ]
finished. total time: 0.479s
But what are the signed images?
So I skip flashing the 'signed images' and go ahead and type: 'fastboot oem lock' and it gives me this error:
Code:
...
<bootloader> Re-Lock Failure. See display.
OKAY [ 0.644s ]
finished. total time: 0.667s
So, I look at the display and it says:
Code:
Fastboot Reason: Reboot to bootloader
fastboot: max download size: 100MB
USB connected
Fastboot command failed
OEM lock
OEM lock begin
Getvar partition-type:recovery
Fastboot command failed
Getvar max-download-size
OEM lock
E:No valid PIV block in SP for cdrom
E:piv validation failed (cdrom)
E:Falied to validate piv objects
Re-lock failure
Somebody please help me!! I have been trying to search for my phone's stock rom for days without success! PLEASE HELPPP!!!!
If you only want to go back to stock-firmware, you don't have to relock your bootloader. You only have to flash the stockimage with RSD-Lite.
But if you really want to relock:
http://forum.xda-developers.com/showpost.php?p=44430691&postcount=4
Firmwares fro our Razr I:
http://sbf.droid-developers.org/phone.php?device=13
ICuaI said:
If you only want to go back to stock-firmware, you don't have to relock your bootloader. You only have to flash the stockimage with RSD-Lite.
But if you really want to relock:
http://forum.xda-developers.com/showpost.php?p=44430691&postcount=4
Firmwares fro our Razr I:
http://sbf.droid-developers.org/phone.php?device=13
Click to expand...
Click to collapse
Thank you. It did work but I want to know, how do you tell when it is locked?
Also, I have already tried to go back to stock firmware using RSD-Lite but I don't know where to find the needed file...If you can help with that, I would be very grateful.
Thank you,
GoldenPaul27
Do you have to change the downloaded file extension so it doesn't have the .zip on the end of it?
GoldenPaul27 said:
Do you have to change the downloaded file extension so it doesn't have the .zip on the end of it?
Click to expand...
Click to collapse
No, the is zipped. You have to unzip this file first.
HTML:
ICuaI said:
No, the is zipped. You have to unzip this file first.
Click to expand...
Click to collapse
OK. I shall try this. Thank you for your help so far.
nice
I wanted this 2, tks!!
Just another question:
How do you tell when the bootloader is relocked??
Hi all,
I have debranded my EVA-L09 from Three UK, so that I can get faster OTA updates (and also to try to participate in future betas) - I'm now successfully on C432B166
However, I'd like to now re-lock my bootloader, but am struggling.
Whenever I boot to fastboot and run "fastboot oem relock ****************", I get the following response:
Code:
...
FAILED (remote: root type is risk)
finished. total time: 0.006s
If I try "fastboot oem lock ****************", I get the following:
Code:
...
FAILED (remote: Command not allowed)
finished. total time: 0.009s
I have tried with "Enable OEM unlock" both enabled and disabled in Developer Options.
Can anyone give me any pointers on how to re-lock the bootloader?
Many thanks!
Sorry to bump an old thread. I'm currently having the same problems @ConfusedTA . Unfortunately I think it's difficult to re-lock bootloader without being on the same firmware that you were on when you unlocked it.
If anybody knows a way of forcing the bootloader to lock it'd be much appreciated!
Hi all,
I have an incorrect firmware installed for my P10 and lots of things are not working (oreo 8.0). I want to re-flash or rollback to other firmwares but problem is I can't get into TWRP anymore. flashing it doesn't work and although I see in fastboot Phone Unlocked and FRP unlock i have the idea it has to do with the OEM unlock not working properly. It's also not available in the developer options. What;s exactly the link to huawei's page where you can request your phone unlock ID ?
Thanks
Whats not working ?
What is it saying when flashing something through fastboot ?
virusdunil said:
Whats not working ?
What is it saying when flashing something through fastboot ?
Click to expand...
Click to collapse
When I go into the bootloader and want to flash TWRP I get following message:
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (16494 KB)...
OKAY [ 0.552s]
writing 'recovery_ramdisk'...
FAILED (remote: Command not allowed)
finished. total time: 0.566s
What is the ADB command youre using ?
virusdunil said:
What is the ADB command youre using ?
Click to expand...
Click to collapse
fastboot flash recovery_ramdisk twrporeo.img
and my twrp oreo name is twrporeo.img
Thats why its not working...
TRY....... fastboot flash ramdisk twrporeo.img
virusdunil said:
Thats why its not working...
TRY....... fastboot flash ramdisk twrporeo.img
Click to expand...
Click to collapse
Same problem...:
C:\Android>fastboot flash ramdisk twrporeo.img
target reported max download size of 471859200 bytes
sending 'ramdisk' (16494 KB)...
OKAY [ 0.532s]
writing 'ramdisk'...
FAILED (remote: Command not allowed)
finished. total time: 0.546s
i did a mistake...its really recovery_ramdisk
Look Here...
TWRP
virusdunil said:
i did a mistake...its really recovery_ramdisk
Look Here...
TWRP
Click to expand...
Click to collapse
I already tried that but no success. Did a factory reset and now the bootloader is locked again. How can I unlock the bootloader again?
Thanks
1-is your phone working now ?
for bootloader unlock,do what you did first time... fastboot oem unlock yourcode123
how did you get the last update ?....firmware finder ?
virusdunil said:
1-is your phone working now ?
for bootloader unlock,do what you did first time... fastboot oem unlock yourcode123
how did you get the last update ?....firmware finder ?
Click to expand...
Click to collapse
First of all, I've tried to update from Nougat to Orea via Blackballs method in this thread https://forum.xda-developers.com/p10-plus/development/oreo-update-thread-l29c432-t3729907 with the firmware mentioned there
What is not working:
I've managed to do the first part (oreo install), but:
- SImcard has 'No service
- Can't flash TWRP
- Bootloader / phone locked in Fastboot
- I can't remember how I unlocked the P10 last year (I have a P10 L09-VTR, rebranded to L29-VTR and now 'working' on a VKY P10 plus rom)
Hi,
First of all, I hope this is the correct place to ask for help. I didn't see a better place
I own a honor 9 lite phone. I opened bootloader using PotatoNV and testpoints. Everything worked like a charm
But yesterdayy I tried to update it to Treble and after flashing a rom, I faced this error just after restarting the phone:
ERROR MODE
Attention!
Please update system again
Error!
Func NO : 15 (bl31 image)
Func NO : 1 (security verify failed!)
And it keeps restarting all the time
I tried to flash system image from multiple roms, even stock. Also I tried to flash multiple recovery images, boot images, and so on.. but nothing seems to work
The only way I can use thee phone is via fastboot. NO TWRP and no OFFICIAL RECOVERY using Vol+ and Vol-
Please, I need you help
Thank you in advance
Regards
oloco2 said:
Hi,
First of all, I hope this is the correct place to ask for help. I didn't see a better place
I own a honor 9 lite phone. I opened bootloader using PotatoNV and testpoints. Everything worked like a charm
But yesterdayy I tried to update it to Treble and after flashing a rom, I faced this error just after restarting the phone:
ERROR MODE
Attention!
Please update system again
Error!
Func NO : 15 (bl31 image)
Func NO : 1 (security verify failed!)
And it keeps restarting all the time
I tried to flash system image from multiple roms, even stock. Also I tried to flash multiple recovery images, boot images, and so on.. but nothing seems to work
The only way I can use thee phone is via fastboot. NO TWRP and no OFFICIAL RECOVERY using Vol+ and Vol-
Please, I need you help
Thank you in advance
Regards
Click to expand...
Click to collapse
Hi,
in fastboot mode run commands :
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the results.
Some might fail, so don't worry about it.
Try something from the following:
A) in fastboot mode use command
fastboot erase userdata
reboot and try to flash stock recovery_ramdisk and flash full stock FW via dload
B) try to update your phone via eRecovery - turn off, plug the cabel and press and hold Power + Vol Up. In eRecovery's menu select "Download latest etc etc."
C) fully discharge the battery and try previous methods
(in your case little chance, this method works with error 11/2, you have 15/1)
D) use testpoint method
E) paid services (dc-phoenix etc.)
Thank so much for your help -Alf-
Unfortunally I have to say that now my phone is not able to enter fastboot mode.
What I dd:
The comands you asked for:
fastboot oem get-build-number
(bootloader) :System 8.0.0.046(0JRE)
OKAY [ 0.007s]
Finished. Total time: 0.009s
fastboot oem get-product-model
(bootloader)
OKAY [ 0.006s]
Finished. Total time: 0.009s
fastboot getvar vendorcountry
vendorcountry: hw/eu
fastboot oem oeminforead-CUSTOM_VERSION
FAILED (remote: 'The reason of failed input oem_nv_item error!')
fastboot: error: Command failed
fastboot oem oeminforead-SYSTEM_VERSION
(bootloader) :STF-L09C10B100a
OKAY [ 0.008s]
Finished. Total time: 0.009s
As nothing changed, I used testpoints.
I had to enter fastboot oem unlock 5KKK7... in order to unlock bootloader again
But now.. Phone keeps rebooting with the same eror window as before, but I'm still unable to ener not fastboot mode not erecovery.
Now i really feel locked, as I think there's nothin else I can do.
I also unplugged battery multiple times in order to discharge all the circuit, but no news...
Any other idea, please?
Regards
oloco2 said:
Unfortunally I have to say that now my phone is not able to enter fastboot mode
Click to expand...
Click to collapse
oloco2 said:
The only way I can use thee phone is via fastboot.
Click to expand...
Click to collapse
?
Before using potatonv I was able to enter fastoot mode and perform some commands.
Now, after using it, the phone just keeps rebooting showing the errors, but even if I press the buttons, no fastboot/twrp mode...
oloco2 said:
Before using potatonv I was able to enter fastoot mode and perform some commands.
Now, after using it, the phone just keeps rebooting showing the errors, but even if I press the buttons, no fastboot/twrp mode...
Click to expand...
Click to collapse
Try this method - turn off, hold Volume Down and plug the cabel.
oloco2 said:
System 8.0.0.046(0JRE
Click to expand...
Click to collapse
oloco2 said:
fastboot oem get-product-model
(bootloader)
OKAY [ 0.006s]
Click to expand...
Click to collapse
oloco2 said:
failed input oem_nv_item error
Click to expand...
Click to collapse
oloco2 said:
SYSTEM_VERSION
(bootloader) :STF-L09C10B100a
Click to expand...
Click to collapse
Testpoint or dc-phoenix, bro.
-Alf- said:
Testpoint or dc-phoenix, bro.
Click to expand...
Click to collapse
I posted in the previous post that I already used testpoint using potatonv.
I only used testpoint in order to unlock bootloader, and today I used it via potatonv because you seggested it but.... is there any other use I could give to testpoint other than unlocking bootloader? Something that couldhelp in this situation?
Regards
oloco2 said:
I posted in the previous post that I already used testpoint using potatonv.
I only used testpoint in order to unlock bootloader, and today I used it via potatonv because you seggested it but.... is there any other use I could give to testpoint other than unlocking bootloader? Something that couldhelp in this situation?
Regards
Click to expand...
Click to collapse
You have to flash board software using testpoint . Google it, I have no experience with that.
Ok. Thank you -Alf-. I will have a look to google.
But in the meanwhile, if someone else coukd help me a little bit, will be more than welcome
Regards!!
Hi -Alf-
I got good news for me. I got fastboot working again. I need to use potatonv in order to get it, but anywayI think it's good news.
Please, any other idea in order to make it come back, please?
Thank you
oloco2 said:
any other idea in order to make it come back,
Click to expand...
Click to collapse
your phone has an incomplete FW (System 8.0.0.046 (0JRE)),, an unknown model and a problem with oeminfo. Do you even read what I'm writing???
https://forum.xda-developers.com/t/...-security-verify-failed.4453855/post-86982695
Yes I read.
You told me to use testpoint or DC after telling you that I was unable to enter fastmode, but now I'm able to enter again. That's why I asked you for help again, because maybe using fastboot you were able to tell me any other way to test.
Regards
oloco2 said:
Yes I read.
You told me to use testpoint or DC after telling you that I was unable to enter fastmode, but now I'm able to enter again. That's why I asked you for help again, because maybe using fastboot you were able to tell me any other way to test.
Regards
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/i-bricked-my-honor-9-lite.3799176/post-76943641
Hey -Alf- !
I can ay that finally I got it working.
How I did it:
I got a full firmware for my devce and using Huawei Update extractor I extracted all the images to a folder.
Using a little script un batch I createda .txt with multiple lines:
fastboot flash cache cache.img
fastboot flash crc crc.img
fastboot flash curver curver.img
fastboot flash cust cust.img
fastboot flash dts dts.img
fastboot flash eng_system eng_system.img
fastboot flash eng_vendor eng_vendor.img
fastboot flash erecovery_kernel erecovery_kerne.img
fastboot flash erecovery_ramdis erecovery_ramdi.img
fastboot flash erecovery_vbmet erecovery_vbmet.img
fastboot flash erecovery_vendor erecovery_vendo.img
fastboot flash fastboot fastboot.img
fastboot flash fw_hifi fw_hifi.img
fastboot flash fw_lpm3 fw_lpm3.img
fastboot flash hisiufs_gpt hisiufs_gpt.img
fastboot flash boot kernel.img
fastboot flash modemnvm_update modemnvm_update.img
fastboot flash modem_fw modem_fw.img
fastboot flash odm odm.img
fastboot flash package_type.img package_type.img
fastboot flash patch patch.img
fastboot flash preas preas.img
fastboot flash preavs preavs.img
fastboot flash preload preload.img
fastboot flash product product.img
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash sensorhub sensorhub.img
fastboot flash sha256rsa sha256rsa.img
fastboot flash system system.img
fastboot flash teeos teeos.img
fastboot flash trustfirmware trustfirmware.img
fastboot flash userdata userdata.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
fastboot flash verlist verlist.img
fastboot flash version version.img
fastboot flash xloader xloader.img
And I run all the commands.
Some of them gave me some errors like partition lenght or something like that, but at the end, once rebooted, the error was gone.
Then, I updated all the firmware usong dload.
Now I'm facing a little error about oeminfo. I think itis due to the fact that the firmware I used was rusian, and my phone is from EU. I already created another thread in this forum.
I want to thank you for your tme and your ideas.
I hope this post can help someone over there with an error like mine.
Thank you very much for your time and help
Regards
No problem. Btw, why russian FW? I gave you a link with EU FW . Okay, your choice...
oloco2 said:
Now I'm facing a little error about oeminfo
Click to expand...
Click to collapse
Little?
Yes, The russian FW I flashed was yeterday. Now, after you replied to my post, I will try to upgrade FW to the EU version. I hope now everything works as it should
The "litle error" about oeminfo is:
"/preas/xxx" in some parts of the settings. I read somewhere it was due to oeminfo.I'm I wrong?
Thank you!!
I have already tried to fix the /preas/xxx "little error", but it didn't work
After flashing the EU version of lld-l31, I tested it and it seems to be showing the same error in "Compilation Number", in About
lso, in Model it says "unknow". I thing this is why when I tried to find a new OTA version, it didn't find anyone, even if using android 8
Any idea to fix "/preas/xxx"?
Thank you ad regards!!
All fixed!!
I found this oeminfo:
OEMinfo & Dump & CERT Honor 9 Lite (LLD-ALL)
OEMinfo & Dump & CERT Honor 9 Lite (LLD-AL00 / LLD-AL10 / LLD-AL20 / LLD-AL30 / LLD-TL00 / LLD-TL10 / LLD-L21 / LLD-L22 / LLD-L31 / LLD-L32 / LLD-L42). Share File Certificate, File Dump, OE…
azrom.net
After updating it, all info seems to be correct in about. Also, there's a new OTA for me!
What a road gave me this phone
I hope I'mnot comming back to here in a while
Thank you for all your help
Regards!!!
oloco2 said:
I have already tried to fix the /preas/xxx "little error", but it didn't work
After flashing the EU version of lld-l31, I tested it and it seems to be showing the same error in "Compilation Number", in About
lso, in Model it says "unknow". I thing this is why when I tried to find a new OTA version, it didn't find anyone, even if using android 8
Any idea to fix "/preas/xxx"?
Thank you ad regards!!
Click to expand...
Click to collapse
Kindly share your batch script, pls