i have problem fastboot flashing for my mi3, i use miflash and developers rom,but i have stuck my phone,and it said 'remote: size too large' like on pict,can anyone give me how to solve this problem?
thanks before
Download a mi3 fastboot image from miui site
Extract the files from image folder and put in a folder where you have adb
Put the phone in fastboot mode ( power + volume down )
open adb, copy paste those and let the magic happen!
fastboot flash tz tz.mbn
fastboot flash dbi sdi.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot erase boot
fastboot flash misc misc.img
fastboot flash modem NON-HLOS.bin
fastboot flash modem1 NON-HLOS.bin
fastboot flash system system.img
fastboot flash system1 system.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash userdata userdata.img
fastboot flash boot1 boot.img
fastboot reboot
hello, i'm facing with a xt875 bootloop, it's on 9.8.20-72_VZW-22 build Jellybean.
I cann't return JB stock by RSD lite any way to fix this probem ?
i got error 7 when flash zip file in recovery 3E
Fixed with
i copied these file into folder cdma_targa_9.8.2O-72_VZW-22_1ff.xml
moto-fastboot.exe
AdbWinUsbApi.dll
AdbWinApi.dll
https://drive.google.com/open?id=0B2IeRmvUl2wONGs5Nl9MNG9qbG8
then open comand from that folder and run these comand
moto-fastboot flash mbm allow-mbmloader-flashing-mbm.bin
moto-fastboot reboot-bootloader
moto-fastboot flash mbmloader mbmloader.bin
moto-fastboot flash mbm mbm.bin
moto-fastboot reboot-bootloader
moto-fastboot flash cdt.bin cdt.bin
moto-fastboot reboot-bootloader
moto-fastboot erase cache
moto-fastboot flash lbl lbl
moto-fastboot flash logo.bin logo.bin
moto-fastboot flash ebr ebr
moto-fastboot flash mbr mbr
moto-fastboot flash devtree device_tree.bin
moto-fastboot flash system system.img
moto-fastboot flash boot boot.img
moto-fastboot flash recovery recovery.img
moto-fastboot flash cdrom cdrom
moto-fastboot flash preinstall preinstall.img
moto-fastboot flash webtop vendor.img
moto-fastboot flash radio radio.img
moto-fastboot reboot
then i got a success boot. Thanks
[SOLVED] Solution in post 7
After about 7 seven years without bricking a phone I finally managed to do so.
I was on VIE-L09C432B360 and tried to update to B370 via FF and proxy.
All seemed to be good, but on reboot only an error message appeared. I only have the option to go to the erecovery or the fastboot&rescue mode.
In erecovery I'm connected to my WiFi but restore fails.
In Fastboot&Resuce mode I see following text:
"AP_S_COLDBOOT
NA
volumnkey_down_press_process_func
PHONE LOCKED
FRP Lock
rescue mode enter"
In this mode I have a contact to the device in fastboot but I'm not able to flash something (says: Command not allowed)
I also tried DC-Unlocker (as it seems to have an unbrick option) but it won't find the phone. And I tried SRK-Tool, but this is using the same method as if I try to flash via fastboot.
Any options?
Checked a few things via fastboot:
fastboot getvar rescue_version
rescue_version: rescue0.5
finished. total time: 0.064s
fastboot getvar rescue_phoneinfo
rescue_phoneinfo: VIE-L09C432B360
finished. total time: 0.003s
fastboot oem get-product-model
...
(bootloader) VIE-L09
OKAY [ 0.004s]
finished. total time: 0.004s
fastboot oem get-psid
...
(bootloader) SN:N9Q7N1651(...)
(bootloader) IMEI:86086(...)
(bootloader) IMEI:86086(...)
OKAY [ 0.005s]
finished. total time: 0.005s
fastboot getvar vendorcountry
vendorcountry: hw/eu
finished. total time: 0.003s
fastboot oem check-rootinfo
...
(bootloader) old_stat: SAFE
(bootloader) now_stat: SAFE
(bootloader) change_time: 0000000000
OKAY [ 0.005s]
finished. total time: 0.005s
fastboot oem get-build-number
...
(bootloader) :VIE-L09C432B360
OKAY [ 0.003s]
finished. total time: 0.004s
fastboot oem device-info
...
FAILED (remote: Command not allowed)
finished. total time: 0.007s
did u try t unlock? via fastboot?
If you get command not allowed i recommend you DC Pheonix not DC Unlocker....
I tried to unlock. No success.
Using DC-Phoenix I get this:
Current version: VIE_Global_5.0_oversea_channel
Extracting partitions
Cannot create extract directory: F:\Programme\DC_Phoenix\tmp\20170418_175324_UPDATE\
Extract files to directory: F:\Programme\DC_Phoenix\
Extracting partition: MODEMNVM_UPDATE OK
Extracting partition: SENSORHUB OK
Extracting partition: FW_HIFI OK
Extracting partition: BOOT OK
Extracting partition: MODEM OK
Extracting partition: MODEM_DSP OK
Extracting partition: 3RDMODEM OK
Extracting partition: SYSTEM OK
Extracting partition: MODEM_DTB OK
Extracting partition: XLOADER OK
Extracting partition: FASTBOOT OK
Extracting partition: DTS OK
Extracting partition: FW_LPM3 OK
Extracting partition: TEEOS OK
Extracting partition: TRUSTFIRMWARE OK
Extracting partition: RECOVERY OK
Extracting partition: RECOVERY2 OK
Device found: N9Q7N16513XXXXXXXX
IMEI: 8608650XXXXXXXX
Build number: :VIE-L09C432B360
Product model: VIE-L09
Writing MODEMNVM_UPDATE partition with file F:\Programme\DC_Phoenix\MODEMNVM_UPDATE.img
MODEMNVM_UPDATE partition UPDATE ...FAILED
Cannot get FBlock info from device
Activating backdoor: DONE
Writing MODEMNVM_UPDATE partition with file F:\Programme\DC_Phoenix\MODEMNVM_UPDATE.img
MODEMNVM_UPDATE partition UPDATE ...OK
Writing SENSORHUB partition with file F:\Programme\DC_Phoenix\SENSORHUB.img
SENSORHUB partition UPDATE ...OK
Writing FW_HIFI partition with file F:\Programme\DC_Phoenix\FW_HIFI.img
FW_HIFI partition UPDATE ...OK
Writing BOOT partition with file F:\Programme\DC_Phoenix\BOOT.img
BOOT partition UPDATE ...OK
Writing MODEM partition with file F:\Programme\DC_Phoenix\MODEM.img
MODEM partition UPDATE ...OK
Writing MODEM_DSP partition with file F:\Programme\DC_Phoenix\MODEM_DSP.img
MODEM_DSP partition UPDATE ...OK
Writing 3RDMODEM partition with file F:\Programme\DC_Phoenix\3RDMODEM.img
3RDMODEM partition UPDATE ...OK
Writing SYSTEM partition with file F:\Programme\DC_Phoenix\SYSTEM.img
SYSTEM partition UPDATE ...OK
Writing MODEM_DTB partition with file F:\Programme\DC_Phoenix\MODEM_DTB.img
MODEM_DTB partition UPDATE ...OK
Writing XLOADER partition with file F:\Programme\DC_Phoenix\XLOADER.img
XLOADER partition UPDATE ...OK
Writing FASTBOOT partition with file F:\Programme\DC_Phoenix\FASTBOOT.img
FASTBOOT partition UPDATE ...OK
Writing DTS partition with file F:\Programme\DC_Phoenix\DTS.img
DTS partition UPDATE ...OK
Writing FW_LPM3 partition with file F:\Programme\DC_Phoenix\FW_LPM3.img
FW_LPM3 partition UPDATE ...OK
Writing TEEOS partition with file F:\Programme\DC_Phoenix\TEEOS.img
TEEOS partition UPDATE ...OK
Writing TRUSTFIRMWARE partition with file F:\Programme\DC_Phoenix\TRUSTFIRMWARE.img
TRUSTFIRMWARE partition UPDATE ...OK
Writing RECOVERY partition with file F:\Programme\DC_Phoenix\RECOVERY.img
RECOVERY partition UPDATE ...OK
Writing RECOVERY2 partition with file F:\Programme\DC_Phoenix\RECOVERY2.img
RECOVERY2 partition UPDATE ...OK
Software written
18.04.2017 17:55:34 Writing device finished OK
Second attempt:
Current version: VIE_C900B000
Extracting partitions
Cannot create extract directory: F:\Programme\DC_Phoenix\tmp\20170418_180047_UPDATE\
Extract files to directory: F:\Programme\DC_Phoenix\
Extracting partition: XLOADER OK
Extracting partition: FW_LPM3 OK
Extracting partition: FASTBOOT OK
Extracting partition: MODEMNVM_UPDATE OK
Extracting partition: TEEOS OK
Extracting partition: TRUSTFIRMWARE OK
Extracting partition: SENSORHUB OK
Extracting partition: FW_HIFI OK
Extracting partition: BOOT OK
Extracting partition: RECOVERY2 OK
Extracting partition: DTS OK
Extracting partition: MODEM OK
Extracting partition: MODEM_DSP OK
Extracting partition: 3RDMODEM OK
Extracting partition: SYSTEM OK
Extracting partition: CUST OK
Extracting partition: MODEM_DTB OK
Extracting partition: RECOVERY OK
Device found: N9Q7N16513XXXXXXX
IMEI: 860865030XXXXXXX
Build number: :VIE-L09C432B360
Product model: VIE-L09
Writing XLOADER partition with file F:\Programme\DC_Phoenix\XLOADER.img
XLOADER partition UPDATE ...FAILED
Cannot get FBlock info from device
Activating backdoor: DONE
Writing XLOADER partition with file F:\Programme\DC_Phoenix\XLOADER.img
XLOADER partition UPDATE ...OK
Writing FW_LPM3 partition with file F:\Programme\DC_Phoenix\FW_LPM3.img
FW_LPM3 partition UPDATE ...OK
Writing FASTBOOT partition with file F:\Programme\DC_Phoenix\FASTBOOT.img
FASTBOOT partition UPDATE ...OK
Writing MODEMNVM_UPDATE partition with file F:\Programme\DC_Phoenix\MODEMNVM_UPDATE.img
MODEMNVM_UPDATE partition UPDATE ...OK
Writing TEEOS partition with file F:\Programme\DC_Phoenix\TEEOS.img
TEEOS partition UPDATE ...OK
Writing TRUSTFIRMWARE partition with file F:\Programme\DC_Phoenix\TRUSTFIRMWARE.img
TRUSTFIRMWARE partition UPDATE ...OK
Writing SENSORHUB partition with file F:\Programme\DC_Phoenix\SENSORHUB.img
SENSORHUB partition UPDATE ...OK
Writing FW_HIFI partition with file F:\Programme\DC_Phoenix\FW_HIFI.img
FW_HIFI partition UPDATE ...OK
Writing BOOT partition with file F:\Programme\DC_Phoenix\BOOT.img
BOOT partition UPDATE ...OK
Writing RECOVERY2 partition with file F:\Programme\DC_Phoenix\RECOVERY2.img
RECOVERY2 partition UPDATE ...OK
Writing DTS partition with file F:\Programme\DC_Phoenix\DTS.img
DTS partition UPDATE ...OK
Writing MODEM partition with file F:\Programme\DC_Phoenix\MODEM.img
MODEM partition UPDATE ...OK
Writing MODEM_DSP partition with file F:\Programme\DC_Phoenix\MODEM_DSP.img
MODEM_DSP partition UPDATE ...OK
Writing 3RDMODEM partition with file F:\Programme\DC_Phoenix\3RDMODEM.img
3RDMODEM partition UPDATE ...OK
Writing SYSTEM partition with file F:\Programme\DC_Phoenix\SYSTEM.img
SYSTEM partition UPDATE ...FAILED
Erasing CUST partition
Partition CUST erased
Writing CUST partition with file F:\Programme\DC_Phoenix\CUST.img
CUST partition UPDATE ...FAILED
Writing MODEM_DTB partition with file F:\Programme\DC_Phoenix\MODEM_DTB.img
MODEM_DTB partition UPDATE ...OK
Writing RECOVERY partition with file F:\Programme\DC_Phoenix\RECOVERY.img
RECOVERY partition UPDATE ...OK
Software written
18.04.2017 18:02:33 Writing device finished - INCOMPLETE
Third attempt:
Current version: VIE_Global_5.0_oversea_channel
Extracting partitions
Cannot create extract directory: F:\Programme\DC_Phoenix\tmp\20170418_180519_UPDATE\
Extract files to directory: F:\Programme\DC_Phoenix\
Extracting partition: XLOADER OK
Extracting partition: FW_LPM3 OK
Extracting partition: FASTBOOT OK
Extracting partition: MODEMNVM_UPDATE OK
Extracting partition: TEEOS OK
Extracting partition: TRUSTFIRMWARE OK
Extracting partition: SENSORHUB OK
Extracting partition: FW_HIFI OK
Extracting partition: BOOT OK
Extracting partition: RECOVERY OK
Extracting partition: RECOVERY2 OK
Extracting partition: DTS OK
Extracting partition: MODEM OK
Extracting partition: MODEM_DSP OK
Extracting partition: 3RDMODEM OK
Extracting partition: SYSTEM OK
Extracting partition: MODEM_DTB OK
Device found: N9Q7N165130XXXXXX
IMEI: 8608650302XXXXXXXX
Build number: :VIE-L09C432B360
Product model: VIE-L09
Writing XLOADER partition with file F:\Programme\DC_Phoenix\XLOADER.img
XLOADER partition UPDATE ...FAILED
Cannot get FBlock info from device
Activating backdoor: DONE
Writing XLOADER partition with file F:\Programme\DC_Phoenix\XLOADER.img
XLOADER partition UPDATE ...OK
Writing FW_LPM3 partition with file F:\Programme\DC_Phoenix\FW_LPM3.img
FW_LPM3 partition UPDATE ...OK
Writing FASTBOOT partition with file F:\Programme\DC_Phoenix\FASTBOOT.img
FASTBOOT partition UPDATE ...OK
Writing MODEMNVM_UPDATE partition with file F:\Programme\DC_Phoenix\MODEMNVM_UPDATE.img
MODEMNVM_UPDATE partition UPDATE ...OK
Writing TEEOS partition with file F:\Programme\DC_Phoenix\TEEOS.img
TEEOS partition UPDATE ...OK
Writing TRUSTFIRMWARE partition with file F:\Programme\DC_Phoenix\TRUSTFIRMWARE.img
TRUSTFIRMWARE partition UPDATE ...OK
Writing SENSORHUB partition with file F:\Programme\DC_Phoenix\SENSORHUB.img
SENSORHUB partition UPDATE ...OK
Writing FW_HIFI partition with file F:\Programme\DC_Phoenix\FW_HIFI.img
FW_HIFI partition UPDATE ...OK
Writing BOOT partition with file F:\Programme\DC_Phoenix\BOOT.img
BOOT partition UPDATE ...OK
Writing RECOVERY partition with file F:\Programme\DC_Phoenix\RECOVERY.img
RECOVERY partition UPDATE ...OK
Writing RECOVERY2 partition with file F:\Programme\DC_Phoenix\RECOVERY2.img
RECOVERY2 partition UPDATE ...OK
Writing DTS partition with file F:\Programme\DC_Phoenix\DTS.img
DTS partition UPDATE ...OK
Writing MODEM partition with file F:\Programme\DC_Phoenix\MODEM.img
MODEM partition UPDATE ...OK
Writing MODEM_DSP partition with file F:\Programme\DC_Phoenix\MODEM_DSP.img
MODEM_DSP partition UPDATE ...OK
Writing 3RDMODEM partition with file F:\Programme\DC_Phoenix\3RDMODEM.img
3RDMODEM partition UPDATE ...OK
Writing SYSTEM partition with file F:\Programme\DC_Phoenix\SYSTEM.img
SYSTEM partition UPDATE ...OK
Writing MODEM_DTB partition with file F:\Programme\DC_Phoenix\MODEM_DTB.img
MODEM_DTB partition UPDATE ...OK
Software written
18.04.2017 18:07:29 Writing device finished OK
Fourth attempt:
Current version: VIE_Global_5.0_oversea_channel
Extracting partitions
Cannot create extract directory: F:\Programme\DC_Phoenix\tmp\20170418_181719_UPDATE\
Extract files to directory: F:\Programme\DC_Phoenix\
Extracting partition: CUST OK
Extracting partition: VERSION OK
Device found: N9Q7N165130XXXXXX
IMEI: 8608650302XXXXXXXX
Build number: :VIE-L09C432B360
Product model: VIE-L09
Erasing CUST partition
ERASE partition CUST ...FAILED
Writing CUST partition with file F:\Programme\DC_Phoenix\CUST.img
CUST partition UPDATE ...FAILED
Cannot get FBlock info from device
Activating backdoor: DONE
Erasing CUST partition
Partition CUST erased
Writing CUST partition with file F:\Programme\DC_Phoenix\CUST.img
CUST partition UPDATE ...OK
Writing VERSION partition with file F:\Programme\DC_Phoenix\VERSION.img
VERSION partition UPDATE ...OK
Software written
18.04.2017 18:17:39 Writing device finished OK
But still the device won't boot.
Try rolling back by putting the rollback update.zip file in dload folder on an SD card. If that loads successfully, load a 202 or below firmware using the same method (SD card) and then you should be able to update to 370.
use rollback from N to M in DC Pheonix amd after restart enter in fastboot again and flash with DC Pheonix B180.
---------- Post added at 11:23 PM ---------- Previous post was at 11:20 PM ----------
Also after you install what i said bellow try to get into recovery and wipe data and cache
zubyro said:
use rollback from N to M in DC Pheonix amd after restart enter in fastboot again and flash with DC Pheonix B180.
---------- Post added at 11:23 PM ---------- Previous post was at 11:20 PM ----------
Also after you install what i said bellow try to get into recovery and wipe data and cache
Click to expand...
Click to collapse
I tried the rollback from SD-Card and and via DC-Phoenix. Both time no success.
No I will try to get into Recovery before it reboots and try to clear everything.
Ok, I finally managed to bring it back to life. Here is, what I did (Don't know if all is necessary, but thats what I did):
First: The phone was in a bootloop, Bootloader locked and FRP locked. eRecovery didn't work, wipe cache and factory reset won't work.
So I found a Firmware VIE-L09C432B170 which also contains the userdata.img and cache.img (note that most of the UPDATE.APP won't have them). After flashing this with DC-Phoenix I was still in a bootloop. I than flashed the UPDATE.APP of VIE-L09C02B131 (which was the version the phone came with).
And here we go: The phone is back alive and on VIE-L09C432B131.
good job. next time pay attention on what you flash...
zubyro said:
good job. next time pay attention on what you flash...
Click to expand...
Click to collapse
I payed a lot attention. I had at least two looks at the CUST and Build and also had a look into VERLIST.img. But something went completely wrong.
I found out, that the vendor and vendor country were missing. And now I'm not able to update.
So next time I pay attention which phone I buy. Either a Nexus (Pixel) or a OnePlus. Or the next Nokia, which seems to be very promising.
agree!
Further request
Rocksau said:
Ok, I finally managed to bring it back to life. Here is, what I did (Don't know if all is necessary, but thats what I did):
First: The phone was in a bootloop, Bootloader locked and FRP locked. eRecovery didn't work, wipe cache and factory reset won't work.
So I found a Firmware VIE-L09C432B170 which also contains the userdata.img and cache.img (note that most of the UPDATE.APP won't have them). After flashing this with DC-Phoenix I was still in a bootloop. I than flashed the UPDATE.APP of VIE-L09C02B131 (which was the version the phone came with).
And here we go: The phone is back alive and on VIE-L09C432B131.
Click to expand...
Click to collapse
Hi! Is it possible to flash UPDATE.APP directly from fastboot?
do you still have a copy of VIE-L09C432B131 that i can download directly from you?
Rocksau said:
Ok, I finally managed to bring it back to life. Here is, what I did (Don't know if all is necessary, but thats what I did):
First: The phone was in a bootloop, Bootloader locked and FRP locked. eRecovery didn't work, wipe cache and factory reset won't work.
So I found a Firmware VIE-L09C432B170 which also contains the userdata.img and cache.img (note that most of the UPDATE.APP won't have them). After flashing this with DC-Phoenix I was still in a bootloop. I than flashed the UPDATE.APP of VIE-L09C02B131 (which was the version the phone came with).
And here we go: The phone is back alive and on VIE-L09C432B131.
Click to expand...
Click to collapse
Huawei has no firmware AT ALL on their websites for the P9 Plus and without the firmware, I don't know how to navigate through this. I done the exact same thing to my P9 Plus
Hey there,
like the title says i have managed it to break my phone -.-:crying:
here are the stats:
Selected Applications port COM10
Selected Diagnostics port COM10
Found Phone : VTR-L09
Model : Huawei phone in fastboot mode
IMEI : 862789034425897
Serial NR. : 6PQ0217406000752
Firmware : VTR-L09 8.0.0.360(C432
IMEI1:862789034425897
MEID:86278903442589
FB LockState: LOCKED
USER LockState: UNLOCKED
unlocked
Battery state: 3523mv
Dload:
doesnt work )=
Service_Full_Repair_Vicky-L29_C10B151_Firmware_Russian_Federation_Belarus_Georgia_Mongolia_androidhost.ru
I have tried:
from update zip :
fastboot flash recovery_ramdisk recovery_ramdisk.img
fastboot flash kernel kernel.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot flash ramdisk ramdisk.img
and tried:
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash erecovery_kernel erecovery_kerne.img
fastboot flash erecovery_ramdis erecovery_ramdi.img
fastboot flash erecovery_vbmeta erecovery_vbmet.img
fastboot flash erecovery_vendor erecovery_vendo.img
also tried hwota...
but Nothing Works for me )=
Still only have fastboot and error mode, no acces to twrp or erecovery )=
have no idea left right now.... :silly: sitting the last 2 days on this -.- just want my phone back :crying:
I have a complete recovery from twrp, the one file full ota, and the 3 part full ota
please help me to get back to full funktion or to twrp from where i could manage the rest (=
sry for my bad englisch to less slep these days
Okay invested 20 bucks in dcphonix for 3 day licence
but my phone is back even my datas are restored
now it is loading at 10% when akku is charged i will again try to install twrp which killed my system because i flashed it via fastboot flash recovery instead of fastboot flash recovery_ramdisk
Hope it will work now with the right command and the newest twrp (=
will try the 3.2.1 oreo v2 (= or should i use another?
and i see magisk is gone (what was clear) wich Version best for reinstall?
have to take a look if i give my akkount free so you have all a chance to unbrick
Edd: will give it free after fin and saved my phone since it is a 3 day acc and no option that you buy things on my card (=
dt92 said:
Okay invested 20 bucks in dcphonix for 3 day licence
but my phone is back even my datas are restored
now it is loading at 10% when akku is charged i will again try to install twrp which killed my system because i flashed it via fastboot flash recovery instead of fastboot flash recovery_ramdisk
Hope it will work now with the right command and the newest twrp (=
will try the 3.2.1 oreo v2 (= or should i use another?
and i see magisk is gone (what was clear) wich Version best for reinstall?
have to take a look if i give my akkount free so you have all a chance to unbrick
Edd: will give it free after fin and saved my phone since it is a 3 day acc and no option that you buy things on my card (=
Click to expand...
Click to collapse
Hi dt92! I'm in the same place as you after accidentally killing my Oreo with flashing TWRP, how did this program work?
And I know this is too much, but could I use what you used since i'm just a student without a credit card right now?
I'm so sorry, I'm so nervous right now since my parents would kill me if they figured out that I broke the phone they gave to me as a gift (
uzernamezz said:
Hi dt92! I'm in the same place as you after accidentally killing my Oreo with flashing TWRP, how did this program work?
And I know this is too much, but could I use what you used since i'm just a student without a credit card right now?
I'm so sorry, I'm so nervous right now since my parents would kill me if they figured out that I broke the phone they gave to me as a gift (
Click to expand...
Click to collapse
hey here (= accidentally killing my system again and stuck now between bootloader, e recovery, twrp, and download but thiks there is a chance out of it (= (if someone know please help)
Tryed to share the software at a friend with boken phone yesterday but its ip based )=
so yes i think the software could help you and you can pay per pay pal
don`t panic think we will manage to get our vtr`s back on Oreo (=
Code:
Looking for a device in upgrade mode
No devices detected in upgrade mode
Looking for a device in fastboot mode
Device found: 6PQ0217406000752
07.03.2018 22:16:53 Starting extracting partitions from file UPDATE.APP
Current version: VTR_C900_EMUI8.0
Cannot create extract directory: C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\tmp\20180307_221653_UPDATE\
Extract files to directory: C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\
Extracting partition: XLOADER OK
Extracting partition: FW_LPM3 OK
Extracting partition: FASTBOOT OK
Extracting partition: VECTOR OK
Extracting partition: VBMETA OK
Extracting partition: MODEMNVM_UPDATE OK
Extracting partition: TEEOS OK
Extracting partition: TRUSTFIRMWARE OK
Extracting partition: SENSORHUB OK
Extracting partition: FW_HIFI OK
Extracting partition: DTS OK
Extracting partition: KERNEL OK
Extracting partition: RECOVERY_RAMDISK OK
Extracting partition: RECOVERY_VENDOR OK
Extracting partition: RECOVERY_VBMETA OK
Extracting partition: ERECOVERY_KERNEL OK
Extracting partition: ERECOVERY_RAMDISK OK
Extracting partition: ERECOVERY_VENDOR OK
Extracting partition: ERECOVERY_VBMETA OK
Extracting partition: RAMDISK OK
Extracting partition: CACHE OK
Extracting partition: SYSTEM OK
Extracting partition: ISP_FIRMWARE OK
Extracting partition: MODEM_FW OK
Extracting partition: HISEE_IMG OK
Extracting partition: HISEE_FS OK
Extracting partition: ODM OK
07.03.2018 22:20:50 Extracting partitions finished OK
07.03.2018 22:20:50 Starting to write device in FASTBOOT mode...
Device found: 6PQ0217406000752
IMEI: 862789034425897
Build number: :VTR-L09 8.0.0.360(C432)
Product model: VTR-L09
Writing XLOADER partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\XLOADER.img
XLOADER partition UPDATE ...FAILED
Cannot get FBlock info from device
Activating backdoor: DONE
Writing XLOADER partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\XLOADER.img
XLOADER partition UPDATE ...OK
Writing FW_LPM3 partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\FW_LPM3.img
FW_LPM3 partition UPDATE ...OK
Writing FASTBOOT partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\FASTBOOT.img
FASTBOOT partition UPDATE ...OK
Writing VECTOR partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\VECTOR.img
VECTOR partition UPDATE ...OK
Writing VBMETA partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\VBMETA.img
VBMETA partition UPDATE ...OK
Writing MODEMNVM_UPDATE partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\MODEMNVM_UPDATE.img
MODEMNVM_UPDATE partition UPDATE ...OK
Writing TEEOS partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\TEEOS.img
TEEOS partition UPDATE ...OK
Writing TRUSTFIRMWARE partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\TRUSTFIRMWARE.img
TRUSTFIRMWARE partition UPDATE ...OK
Writing SENSORHUB partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\SENSORHUB.img
SENSORHUB partition UPDATE ...OK
Writing FW_HIFI partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\FW_HIFI.img
FW_HIFI partition UPDATE ...OK
Writing DTS partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\DTS.img
DTS partition UPDATE ...OK
Writing KERNEL partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\KERNEL.img
KERNEL partition UPDATE ...OK
Writing RECOVERY_RAMDISK partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\RECOVERY_RAMDISK.img
RECOVERY_RAMDISK partition UPDATE ...OK
Writing RECOVERY_VENDOR partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\RECOVERY_VENDOR.img
RECOVERY_VENDOR partition UPDATE ...OK
Writing RECOVERY_VBMETA partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\RECOVERY_VBMETA.img
RECOVERY_VBMETA partition UPDATE ...OK
Writing ERECOVERY_KERNEL partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\ERECOVERY_KERNEL.img
ERECOVERY_KERNEL partition UPDATE ...OK
Writing ERECOVERY_RAMDISK partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\ERECOVERY_RAMDISK.img
ERECOVERY_RAMDISK partition UPDATE ...OK
Writing ERECOVERY_VENDOR partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\ERECOVERY_VENDOR.img
ERECOVERY_VENDOR partition UPDATE ...OK
Writing ERECOVERY_VBMETA partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\ERECOVERY_VBMETA.img
ERECOVERY_VBMETA partition UPDATE ...OK
Writing RAMDISK partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\RAMDISK.img
RAMDISK partition UPDATE ...OK
Erasing CACHE partition
Partition CACHE erased
Writing CACHE partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\CACHE.img
CACHE partition UPDATE ...OK
Writing SYSTEM partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\SYSTEM.img
SYSTEM partition UPDATE ...OK
Writing ISP_FIRMWARE partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\ISP_FIRMWARE.img
ISP_FIRMWARE partition UPDATE ...OK
Writing MODEM_FW partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\MODEM_FW.img
MODEM_FW partition UPDATE ...OK
Writing HISEE_IMG partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\HISEE_IMG.img
HISEE_IMG partition UPDATE ...OK
Writing HISEE_FS partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\HISEE_FS.img
HISEE_FS partition UPDATE ...OK
Writing ODM partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\ODM.img
ODM partition UPDATE ...OK
Software written
07.03.2018 22:28:01 Writing device finished OK
thats the output of DC- phoenix...
think the software unzips the update files, open backdoor, load them one by one....
but don´t know how they managed the backdoor
hope to get my phone back to work today or tomorrow otherwise 20 bucks for nothing
but have some problems i do not understand have a full recovery backup but cant start phone when i load it via twrp, it is like some part is missing
dt92 said:
hey here (= accidentally killing my system again and stuck now between bootloader, e recovery, twrp, and download but thiks there is a chance out of it (= (if someone know please help)
Tryed to share the software at a friend with boken phone yesterday but its ip based )=
so yes i think the software could help you and you can pay per pay pal
don`t panic think we will manage to get our vtr`s back on Oreo (=
Code:
Looking for a device in upgrade mode
No devices detected in upgrade mode
Looking for a device in fastboot mode
Device found: 6PQ0217406000752
07.03.2018 22:16:53 Starting extracting partitions from file UPDATE.APP
Current version: VTR_C900_EMUI8.0
Cannot create extract directory: C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\tmp\20180307_221653_UPDATE\
Extract files to directory: C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\
Extracting partition: XLOADER OK
Extracting partition: FW_LPM3 OK
Extracting partition: FASTBOOT OK
Extracting partition: VECTOR OK
Extracting partition: VBMETA OK
Extracting partition: MODEMNVM_UPDATE OK
Extracting partition: TEEOS OK
Extracting partition: TRUSTFIRMWARE OK
Extracting partition: SENSORHUB OK
Extracting partition: FW_HIFI OK
Extracting partition: DTS OK
Extracting partition: KERNEL OK
Extracting partition: RECOVERY_RAMDISK OK
Extracting partition: RECOVERY_VENDOR OK
Extracting partition: RECOVERY_VBMETA OK
Extracting partition: ERECOVERY_KERNEL OK
Extracting partition: ERECOVERY_RAMDISK OK
Extracting partition: ERECOVERY_VENDOR OK
Extracting partition: ERECOVERY_VBMETA OK
Extracting partition: RAMDISK OK
Extracting partition: CACHE OK
Extracting partition: SYSTEM OK
Extracting partition: ISP_FIRMWARE OK
Extracting partition: MODEM_FW OK
Extracting partition: HISEE_IMG OK
Extracting partition: HISEE_FS OK
Extracting partition: ODM OK
07.03.2018 22:20:50 Extracting partitions finished OK
07.03.2018 22:20:50 Starting to write device in FASTBOOT mode...
Device found: 6PQ0217406000752
IMEI: 862789034425897
Build number: :VTR-L09 8.0.0.360(C432)
Product model: VTR-L09
Writing XLOADER partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\XLOADER.img
XLOADER partition UPDATE ...FAILED
Cannot get FBlock info from device
Activating backdoor: DONE
Writing XLOADER partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\XLOADER.img
XLOADER partition UPDATE ...OK
Writing FW_LPM3 partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\FW_LPM3.img
FW_LPM3 partition UPDATE ...OK
Writing FASTBOOT partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\FASTBOOT.img
FASTBOOT partition UPDATE ...OK
Writing VECTOR partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\VECTOR.img
VECTOR partition UPDATE ...OK
Writing VBMETA partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\VBMETA.img
VBMETA partition UPDATE ...OK
Writing MODEMNVM_UPDATE partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\MODEMNVM_UPDATE.img
MODEMNVM_UPDATE partition UPDATE ...OK
Writing TEEOS partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\TEEOS.img
TEEOS partition UPDATE ...OK
Writing TRUSTFIRMWARE partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\TRUSTFIRMWARE.img
TRUSTFIRMWARE partition UPDATE ...OK
Writing SENSORHUB partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\SENSORHUB.img
SENSORHUB partition UPDATE ...OK
Writing FW_HIFI partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\FW_HIFI.img
FW_HIFI partition UPDATE ...OK
Writing DTS partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\DTS.img
DTS partition UPDATE ...OK
Writing KERNEL partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\KERNEL.img
KERNEL partition UPDATE ...OK
Writing RECOVERY_RAMDISK partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\RECOVERY_RAMDISK.img
RECOVERY_RAMDISK partition UPDATE ...OK
Writing RECOVERY_VENDOR partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\RECOVERY_VENDOR.img
RECOVERY_VENDOR partition UPDATE ...OK
Writing RECOVERY_VBMETA partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\RECOVERY_VBMETA.img
RECOVERY_VBMETA partition UPDATE ...OK
Writing ERECOVERY_KERNEL partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\ERECOVERY_KERNEL.img
ERECOVERY_KERNEL partition UPDATE ...OK
Writing ERECOVERY_RAMDISK partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\ERECOVERY_RAMDISK.img
ERECOVERY_RAMDISK partition UPDATE ...OK
Writing ERECOVERY_VENDOR partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\ERECOVERY_VENDOR.img
ERECOVERY_VENDOR partition UPDATE ...OK
Writing ERECOVERY_VBMETA partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\ERECOVERY_VBMETA.img
ERECOVERY_VBMETA partition UPDATE ...OK
Writing RAMDISK partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\RAMDISK.img
RAMDISK partition UPDATE ...OK
Erasing CACHE partition
Partition CACHE erased
Writing CACHE partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\CACHE.img
CACHE partition UPDATE ...OK
Writing SYSTEM partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\SYSTEM.img
SYSTEM partition UPDATE ...OK
Writing ISP_FIRMWARE partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\ISP_FIRMWARE.img
ISP_FIRMWARE partition UPDATE ...OK
Writing MODEM_FW partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\MODEM_FW.img
MODEM_FW partition UPDATE ...OK
Writing HISEE_IMG partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\HISEE_IMG.img
HISEE_IMG partition UPDATE ...OK
Writing HISEE_FS partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\HISEE_FS.img
HISEE_FS partition UPDATE ...OK
Writing ODM partition with file C:\Users\Dennis\Desktop\Huawai\DC_Phoenix_v50\ODM.img
ODM partition UPDATE ...OK
Software written
07.03.2018 22:28:01 Writing device finished OK
thats the output of DC- phoenix...
think the software unzips the update files, open backdoor, load them one by one....
but don´t know how they managed the backdoor
hope to get my phone back to work today or tomorrow otherwise 20 bucks for nothing
but have some problems i do not understand have a full recovery backup but cant start phone when i load it via twrp, it is like some part is missing
Click to expand...
Click to collapse
I see!
I'm so sorry for sending you a PM, haha.. but that means I'm out of luck then :/ since I'm not allowed to have one..
But hopefully we find other free alternatives for this, yeah?
Cheers mate! Good luck on fixing your phone!
uzernamezz said:
I see!
I'm so sorry for sending you a PM, haha.. but that means I'm out of luck then :/ since I'm not allowed to have one..
But hopefully we find other free alternatives for this, yeah?
Cheers mate! Congrats on fixing your phone!
Click to expand...
Click to collapse
right now its blackscreen/ dead :crying:
hope to get it back running
dt92 said:
right now its blackscreen/ dead :crying:
hope to get it back running
Click to expand...
Click to collapse
Keep us posted! Maybe we'll be able to find something that can apply to all of our phones?
If anyone needs, can use my DC-Phoenix account, I don`t need it anymore.
Your username is: cesedy
Your password is: dnL4eHEm
cesedy said:
If anyone needs, can use my DC-Phoenix account, I don`t need it anymore.
Your username is: cesedy
Your password is: dnL4eHEm
Click to expand...
Click to collapse
Bless you, mate! Unfortunately, it says that the software is locked to another PC..
Doesn't this have something to do with IP addresses or something?
That would suck, as I have Dynamic IP.
But, in Task manager I saw processes adb.exe and fastboot.exe which I am not running.
As i have nothing like that opened, maybe those were diversion processes to stay connected only to my PC.
I have closed them now, can you try again?
And, if you succeed, then, maybe, close those on your Task Manager aswell.
you cant use it because it is not ip based its mac based you can only use the tool where you make the first install )=
now since i hang on blackscreen of death -.- i found a way wich i will try tomorrow (=
take a look :
pic of testpoint vtr-l09
https://drive.google.com/file/d/1uGl...RQNxSZhgm/view
then you can reinstall factory firmware
https://www.dc-unlocker.com/file-lis...with_Testpoint
think this is the last way /=
in att is the testpoint reset data for vtr-l09 but now i go to bed
tommor i will upload a full rom vtr-l09c432-b171 ink dtwork file and vtr-l29 if i find i frind where i can make the upload because i pay per 30 GB
cesedy said:
That would suck, as I have Dynamic IP.
But, in Task manager I saw processes adb.exe and fastboot.exe which I am not running.
As i have nothing like that opened, maybe those were diversion processes to stay connected only to my PC.
I have closed them now, can you try again?
And, if you succeed, then, maybe, close those on your Task Manager aswell.
Click to expand...
Click to collapse
Hey, I checked for those two, unfortunately nothing else seemed to work just as well. Is there any hope left?
dt92 said:
here are the stats:
Selected Applications port COM10
Selected Diagnostics port COM10
Found Phone : VTR-L09
Model : Huawei phone in fastboot mode
IMEI : 862789034425897
Serial NR. : 6PQ0217406000752
Firmware : VTR-L09 8.0.0.360(C432
IMEI1:862789034425897
MEID:86278903442589
FB LockState: LOCKED
USER LockState: UNLOCKED
unlocked
Battery state: 3523mv
Click to expand...
Click to collapse
Hello, please how you manage to see this info on your PC?
used hcu witch is part of dc phonix i think (=
ot oem info in fastboot would also do it (=
after a little talk with my handy distributor i will send it back and get a new one thanks god for insurance
so now i have just to way a few days and should then do it a little more slow step by step...
but will stand by your sites
even at my state the phone could be repaired but i don´t want to open it (=
There is no boot.img/ramdisk.img on my UPDATE.APP file. I learned that it changes every OS version update e.g. boot.img from Nougat became ramdisk.img on Oreo.
I want to know if it is the same case as Oreo to Pie and if it is what is the appropriate file to choose.
I only have this files inside my UPDATE.APP
HTML:
BASE_VER.img
BASE_VERLIST.img
CACHE.img
CRC.img
CUST.img
DTO.img
DTS.img
ENG_SYSTEM.img
ENG_VENDOR.img
ERECOVERY_KERNE.img
ERECOVERY_RAMDI.img
ERECOVERY_VBMET.img
ERECOVERY_VENDO.img
FASTBOOT.img
FW_HIFI.img
FW_LPM3.img
HDCP.img
HHEE.img
HISEE_IMG.img
HISIUFS_GPT.img
ISP_FIRMWARE.img
KERNEL.img
MODEMNVM_CUST.img
MODEMNVM_UPDATE.img
MODEM_FW.img
ODM.img
PACKAGE_TYPE.img
PATCH.img
PREAS.img
PREAVS.img
PRODUCT.img
ERECOVERY_RAMDIS.img
ERECOVERY_VBMETA.img
ERECOVERY_VENDOR.img
SENSORHUB.img
SHA234RSA.img
SYSTEM.img
TEEOS.img
TRUSTFIRMWARE.img
VBMETA.img
VECTOR.img
VENDOR.img
XLOADER.img
Please help me I just want to install Magisk on my phone. Thank you.