Hi everyone,
I followed this guide here http://forum.xda-developers.com/moto-g-lte/general/rooting-moto-g-2015-lte-xt1078-t3086069 and did everything that is said. However, installing supersu bricked my phone and it won't boot (it is stuck on "warning bootloader unlocked"). I want to flash the official stockrom but I can't access fastboot mode. Indeed, if I try to shut down my phone, it will restart automaticly and I can't start fastboot mode by pressing combo keys.
EDIT : I managed to enter fastboot mode. I installed this 6.0 stock http://forum.xda-developers.com/moto-g-lte/general/stock-6-0-marshmallow-europe-reteu-t3338075. However I don't know how to root my phone anymore :/
I have moto G Lte 2014 and android 6.0 (official rom).
LAST EDIT : thanks to this guy http://forum.xda-developers.com/moto-g-lte/general/root-marshmallow-stock-rom-t3317859 I managed to install SuperSU. I used this https://twrp.me/devices/motorolamotog2014lte.html
Thanks in advance for the help you can provide,
Loïc.
hey folks,
Recently i installed Lineage OS 15.0 on my MOTO E4 Plus XT1770 MT Processor and after that phone started booting into TWRP only.
Phone boot to system only via "fastboot continue" command.
I tried to flash stock ROM via SP flash tool but when i switch off my phone and connect USB, then it auto start and boot into TWRP again. I am stuck here, please help.
swapnil-15 said:
hey folks,
Recently i installed Lineage OS 15.0 on my MOTO E4 Plus XT1770 MT Processor and after that phone started booting into TWRP only.
Phone boot to system only via "fastboot continue" command.
I tried to flash stock ROM via SP flash tool but when i switch off my phone and connect USB, then it auto start and boot into TWRP again. I am stuck here, please help.
Click to expand...
Click to collapse
Sounds like ya accidentally flashed the recovery to boot partition
I also tried to flash using SP tool but phone doesn't switch off completely. Phone auto boot on USB plug .
swapnil-15 said:
I also tried to flash using SP tool but phone doesn't switch off completely. Phone auto boot on USB plug .
Click to expand...
Click to collapse
Then go Completely Back to Stock and start over.. this stuff is indeed a learning experience but much easier once you try it yourself and get everything processed
bcrichster said:
Then go Completely Back to Stock and start over.. this stuff is indeed a learning experience but much easier once you try it yourself and get everything processed
Click to expand...
Click to collapse
I tried using SP Flash tool but when i switch off, my phone auto boots on USB connect, i also disabled fastboot oem off-mode-charge but still it doesn't switching off and i m not sure how to flash stock firmware using fastboot :crying:
swapnil-15 said:
I tried using SP Flash tool but when i switch off, my phone auto boots on USB connect, i also disabled fastboot oem off-mode-charge but still it doesn't switching off and i m not sure how to flash stock firmware using fastboot :crying:
Click to expand...
Click to collapse
I dunno about any SP flash tool, I used the minimal ADB fastboot..
Running some Xper!meπts from my Moto E (4) Plus
swapnil-15 said:
I tried using SP Flash tool but when i switch off, my phone auto boots on USB connect, i also disabled fastboot oem off-mode-charge but still it doesn't switching off and i m not sure how to flash stock firmware using fastboot :crying:
Click to expand...
Click to collapse
See the tutorial on that here: https://forum.xda-developers.com/moto-e4-plus/how-to/moto-e4-qualcomm-owens-completely-to-t3743441
same happened here looking for a solution .. worked 2 times and on both got stuck on "editing partition details"while wiping data.. first time worked and pressing holding the power button restarted and flashed again twrp and worked. 2nd time it went in twrp boot loop. :/
any solutions to our same problem ??????
I have also the same problem with my device Bluboo-S1 and TWRP v3.2.1 without solution
Use TWRP v3.1.1-0 for wiping encryption, upgrade TWRP after ya get your ROM booting. Some ppl are reporting success via booting from TWRP to bootloader, then hitting START.. Not all devices are doing this tho, you may have that rare one which requires it..
koop1955 said:
See the tutorial on that here: https://forum.xda-developers.com/moto-e4-plus/how-to/moto-e4-qualcomm-owens-completely-to-t3743441
Click to expand...
Click to collapse
The link you have given is for Owens not for Nicklaus.
Mine is Moto e4 plus (xt1770). So the main point is can i use this method for Nicklaus (xt1770)
Please help me I'm stucked in twrp boot loop :crying::crying:
How did u solve the problem? coz the same thing happened with me right now, if you have any solution then plz tell me.
my moto e4 plus is stuck on orange screen after flashing twrp
my moto e4 stuck on orange state showing message "orange state device cannot be trusted ,you device will boot in 5 sec" and it stuck on boot loop.
this problem occured when i flashed twrp into my phone.i reboot the device then it goes to orange state.after that i cant able to boot the boot loader.
i cant able to boot into bootloader or fastboot mode..
please help me.
How did you resolve this problem.
swapnil-15 said:
I also tried to flash using SP tool but phone doesn't switch off completely. Phone auto boot on USB plug .
Click to expand...
Click to collapse
did you found any way to unbrick your phone? actually me too has this problem.
I was successful in getting the bootloader installed and also twrp but SU and Magisk kept giving error, somehow in the last boot I am now on a boot loop of bad key cannot boot to OS of phone and the backup of the OS will restore but it still will not boot past the bad key loop. I can get to the twrp recovery and the bootloader but no functions work in bootloader twrp works flwlessly but I have no image for my device. Does anyone have the stock rom for the metro verision of moto e5 plus. I have found one for the Cricket version but specs are all wrong. Any help would be appreciated
edit resolved with
cant post link to resolution
archnemesis2099 said:
I was successful in getting the bootloader installed and also twrp but SU and Magisk kept giving error, somehow in the last boot I am now on a boot loop of bad key cannot boot to OS of phone and the backup of the OS will restore but it still will not boot past the bad key loop. I can get to the twrp recovery and the bootloader but no functions work in bootloader twrp works flwlessly but I have no image for my device. Does anyone have the stock rom for the metro verision of moto e5 plus. I have found one for the Cricket version but specs are all wrong. Any help would be appreciated
edit resolved with
cant post link to resolution
Click to expand...
Click to collapse
Hey, even if you can't post a link to the resolution I'd love to have more info! Please either PM me or post a tut, since this looks to be a bit problematic and I'm gonna jump on a freebie from MetroPCS.
Would really appreciate it thx!
Those of you who seek root on the MetroPCS Moto E5 play, I got you
I was working on a simple, straight forward walk through. Maybe just pm me for the details. Would be easier to do it that way being as I'm currently @ work. I can't figure out how to post a pic directly from my Moto E, but if you pm, I'll send you some verification. I soft bricked mine 3 times trying to get it figured out. You know what they say though. 3rd time is the charm. PS, don't flash anything other than recovery!!! The no-verity will cause you to boot loop.
Walkthrough
Okay so here goes keep in mind I cannot post links so mentions of the downloads will be just that, only mentions. The method I used to resinall the os is below. Keep in mind I still had access to both the boot loader and TWRP and that prior to my boot loop no os error I did have developer options and both usb debugging and oem unlock on
How To install Motorola Moto E5 Plus XT1924 Android 8.0.0 Oreo OS
Before you begin, it is important to have all the tools at hand. you will need:
Recharge your phone’s battery well(with more than 70% battery)
Save all your personal data (SMS, contacts, applications, settings, documents, music, photos, etc.)
install Motorola USB drivers,SDK drivers
Download Motorola Moto E5 Plus XT1924-# variant stock firmware
ENABLE USB DEBUGGING:
1. Go to Settings> About phone
2. Find the Build number and press 8 times on it:
3. Return to the previous screen. You will see that a line has appeared: “Developers Options”
4. Press and check “USB Debugging” & “OEM unlocking”
Procedure I used to reinstall OS starts below keep in mind I cannot post links as such you will need to google your phones product/variant to find the correct file, in the case of both the ATT and Metro/Tmobile version of the E5 Plus that is Hanna XT1924-7 and is visible in the bootloader.
Update Motorola Moto E5 Plus XT1924 Android 8.0.0 Oreo
1- Open the folder where ADB and Fastboot are located on your computer & Unzip the downloaded zip file in it preferably in its own directory.
2- In an empty area inside of the unzipped file directory hold down the shift key and right-click with the mouse, the context menu will contain an entry Open command window here:
3- Restart your Moto E5 Plus XT1924 in Recovery mode:
Press & hold the “Volume Down + Power button” at the same time for about 5 seconds
The device enters on Bootloader mode.
4- Connect your Moto E5 Plus XT1924 to your computer
5- Verify that the phone is recognized in Fastboot mode: Type in the command: “fastboot devices”
6- To Install Moto E5 Plus XT1924 Android 8.0 Oreo OTA, Type the following commands removing any bin, img, and sparsechunk commands that don't match your download. The Flash process might take about 25 minutes to complete.
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.# (do this for each numbered variant normally starting with 0)
fastboot flash system_b system_b.img_sparsechunk.# (do this for each numbered variant normally starting with 0)
fastboot flash oem oem.img
fastboot flash oem_b oem_other.img
fastboot flash vendor vendor.img_sparsechunk.# (do this for each numbered variant normally starting with 0)
fastboot erase carrier
fastboot erase userdata
fastboot erase DDR
fastboot flash logo logo.bin
fastboot reboot
Click to expand...
Click to collapse
7- Once the update process finishes, reboot Moto E5 Plus XT1924 by selected Reboot system now.
8- You have successfully installed Motorola Moto E5 Plus XT1924 Android 8.0.0 Oreo OS
archnemesis2099 said:
Okay so here goes keep in mind I cannot post links so mentions of the downloads will be just that, only mentions. The method I used to resinall the os is below. Keep in mind I still had access to both the boot loader and TWRP and that prior to my boot loop no os error I did have developer options and both usb debugging and oem unlock on
How To install Motorola Moto E5 Plus XT1924 Android 8.0.0 Oreo OS
Before you begin, it is important to have all the tools at hand. you will need:
Recharge your phone’s battery well(with more than 70% battery)
Save all your personal data (SMS, contacts, applications, settings, documents, music, photos, etc.)
install Motorola USB drivers,SDK drivers
Download Motorola Moto E5 Plus XT1924-# variant stock firmware
ENABLE USB DEBUGGING:
1. Go to Settings> About phone
2. Find the Build number and press 8 times on it:
3. Return to the previous screen. You will see that a line has appeared: “Developers Options”
4. Press and check “USB Debugging” & “OEM unlocking”
Procedure I used to reinstall OS starts below keep in mind I cannot post links as such you will need to google your phones product/variant to find the correct file, in the case of both the ATT and Metro/Tmobile version of the E5 Plus that is Hanna XT1924-7 and is visible in the bootloader.
Update Motorola Moto E5 Plus XT1924 Android 8.0.0 Oreo
1- Open the folder where ADB and Fastboot are located on your computer & Unzip the downloaded zip file in it preferably in its own directory.
2- In an empty area inside of the unzipped file directory hold down the shift key and right-click with the mouse, the context menu will contain an entry Open command window here:
3- Restart your Moto E5 Plus XT1924 in Recovery mode:
Press & hold the “Volume Down + Power button” at the same time for about 5 seconds
The device enters on Bootloader mode.
4- Connect your Moto E5 Plus XT1924 to your computer
5- Verify that the phone is recognized in Fastboot mode: Type in the command: “fastboot devices”
6- To Install Moto E5 Plus XT1924 Android 8.0 Oreo OTA, Type the following commands removing any bin, img, and sparsechunk commands that don't match your download. The Flash process might take about 25 minutes to complete.
7- Once the update process finishes, reboot Moto E5 Plus XT1924 by selected Reboot system now.
8- You have successfully installed Motorola Moto E5 Plus XT1924 Android 8.0.0 Oreo OS
Click to expand...
Click to collapse
so i have the very exact issue as the OP, i tried this step, all i got was a error after using fastboot, doing the whole command in the cmd window, once it was done i got a endless moto start up icon, i rebooted, it kept giving me the " bad key" blank black page, then N/A, i booted back to twrp wiped and cleaned data to try again, then this time when i tried again i every command was met with errors saying " downgrade verifaction, or something like that, each line was basiclly and error. wont let me try to do the stock install again... im kinda at a lost end here.
stock187 said:
so i have the very exact issue as the OP, i tried this step, all i got was a error after using fastboot, doing the whole command in the cmd window, once it was done i got a endless moto start up icon, i rebooted, it kept giving me the " bad key" blank black page, then N/A, i booted back to twrp wiped and cleaned data to try again, then this time when i tried again i every command was met with errors saying " downgrade verifaction, or something like that, each line was basiclly and error. wont let me try to do the stock install again... im kinda at a lost end here.
Click to expand...
Click to collapse
People don't really tell you how to fix the issue so if you still need help getting your phone back to normal
I will help
Every post I have tried has been flawed or wrong or won't work
Sometimes people just post **** and don't think
PM me, i'll help you as well if you need it. What you have to do is download a platform tools folder and extract it because you need to open it and open up a command prompt within the platform tools folder for the restoration of the phone's stock ROM can be successfully flashed on the phone. I have everything you need to get your phone back operational again. I'll even help you root it successfully if you need more help, and i'll help you decrypt it. there's even a successful custom ROM that i'm using now that's better than the others since the others have so many problems booting up or issues within the ROM itself.
Moto e5 play root
Lord_Worm said:
I was working on a simple, straight forward walk through. Maybe just pm me for the details. Would be easier to do it that way being as I'm currently @ work. I can't figure out how to post a pic directly from my Moto E, but if you pm, I'll send you some verification. I soft bricked mine 3 times trying to get it figured out. You know what they say though. 3rd time is the charm. PS, don't flash anything other than recovery!!! The no-verity will cause you to boot loop.
Click to expand...
Click to collapse
I interested in rooting my metroPCS Moto e5 play but I don't really know what to do & I don't want to end up using a rooting program that will mess up my phone or not have at least a little knowledge of what I'm doing. Your post was the first one I came across and I was wondering if you might be able to help me with a little bit of knowledge. Please & thank you, I'd really appreciate it...
TalkNerdy2Me said:
I interested in rooting my metroPCS Moto e5 play but I don't really know what to do & I don't want to end up using a rooting program that will mess up my phone or not have at least a little knowledge of what I'm doing. Your post was the first one I came across and I was wondering if you might be able to help me with a little bit of knowledge. Please & thank you, I'd really appreciate it...
Click to expand...
Click to collapse
Shoot me a private message and I'll walk you through it
dominoeflux said:
PM me, i'll help you as well if you need it. What you have to do is download a platform tools folder and extract it because you need to open it and open up a command prompt within the platform tools folder for the restoration of the phone's stock ROM can be successfully flashed on the phone. I have everything you need to get your phone back operational again. I'll even help you root it successfully if you need more help, and i'll help you decrypt it. there's even a successful custom ROM that i'm using now that's better than the others since the others have so many problems booting up or issues within the ROM itself.
Click to expand...
Click to collapse
If you could help me out with rooting my moto e5 plus I would be grateful I have a question though my baseband version says M8940TMO_32.22.11.69R
HANNAH_NA_TMO_CUST and the Official TWRP app says my device is Hannah so do I use the James varient or the Hannah one is the plus and one is the play correct? Thank you for any help you might be able to give me.
toscrewed2matter said:
If you could help me out with rooting my moto e5 plus I would be grateful I have a question though my baseband version says M8940TMO_32.22.11.69R
HANNAH_NA_TMO_CUST and the Official TWRP app says my device is Hannah so do I use the James varient or the Hannah one is the plus and one is the play correct? Thank you for any help you might be able to give me.
Click to expand...
Click to collapse
yes, the plus is hannah and the regular e5 is the play...you have the hannah version.
None of this helps me. I unlocked the bootloader tried to install magisk or supersu, but it keeps bootlooping to n/a. I can only get into bootloader and from there to TWRP. That's it. I do have adb access...
Sent from my SM-G955U1 using Tapatalk
Hello all,
I am trying to convert an att Razer 2 to the global unlocked model. All the drivers are correct and I can see it in Fastboot mode. But when I right click and run the flash all.bat in administrator it get stuck at <waiting for device>. The phone is in download mode also (adb reboot Bootloader). Any ideas or help??
Also the Bootloader is unlocked as well.
Need to install fastboot as well.
Unlocked my P10 like this Tutorial:
But it won't boot.
It is possible to open the recovery, but only a WLAN option is offered and no firmware is available.
Fastboot Mode is not accessible.
Is there a Way to fix this?
Hello, nobody who can help me?
i have the same problem with a p9 lite but i can't do anything, fastboot mode or erecovery are also not working.