Database Develop

[MOD] IncrediControl - Easy GUI Voltage Control

Please read this post through thoroughly before downloading.
This app allows you to control your CPU voltages with an easy to use interface. You can increase or decrease voltages (undervolt or overvolt) for all frequencies or fine tune voltages for each individual frequency.
! HTC DEVICES, currently only single core devices are supported !
! ROOT is Required !
! Kernel that supports HAVS or SVS voltage adjustment REQUIRED !
Get it over at http://www.incredikernel.com
IncrediControl is now also available in the market:
IncrediControl
IncrediControl - Ad Free
Additionally, all donators are eligible to receive the Ad Free version. It doesn't matter how much or how little you donate or have donated. If you don't want to purchase the app from the market, you may donate using the button on this page. Please register on the site first and include your username in the comments box.
All previous donators, please register on the site if you have not done so and contact me with your username!
NOTE: The settings in the general tab are only functional in kernels that have implemented the simple sysfs interfaces for usb fast charging and audio boost. The tab will not show up if your kernel does not have these features. If you would like your kernel dev to implement the interfaces, please direct them to these two commits:
https://github.com/Chad0989/android_kernel_common/commit/a7c21fa0391c225900f93960362535179c0cecc9
https://github.com/Chad0989/android_kernel_common/commit/41dc138bae23dc7582de72a4d9895aaa8e1f8b2d
NOTE2: It is a requirement of the voltage adjustment that the kernel you are using has either the HAVS or SVS sysfs interface implemented. If it does not, it will not work.
NOTE3: Before using, please delete any boot scripts you may have in /etc/init.d that toggle any of the settings this app controls.
Get it at http://www.incredikernel.com
Restore script - use this if you went too low and find yourself in a boot loop. Flash through recovery:
http://www.incredikernel.com/?p=229

Thanx for sharing!
Keep up the good work!

IncrediControl v1.3
Major changes include:
Ad Free has now been turned into a key that removes the ads from the free version. This allows donors who have downloaded the ad free version from the site to update through the market.
HAVS voltage checking. Minimum voltages can no longer be set higher than maximum voltages.
Boot voltages are now stored in the application’s data directory. Boot settings will now persist if you update your ROM or restore the application and data from a backup.

Been having trouble with this app...
The voltages dont Stick.
Nor is there any real way to see if your adjustments are stable or not...
Also... I am getting values that are not shown in setcpu.

Maedhros said:
Been having trouble with this app...
The voltages dont Stick.
Nor is there any real way to see if your adjustments are stable or not...
Also... I am getting values that are not shown in setcpu.
Click to expand...
Click to collapse
You have to click apply to set the voltages. If you want the voltages to be applied on boot, you have to check set on boot and then click apply. The check on boot box will never be checked when you start the app. Instead there is text that tells you if you have boot settings or not. This is a failsafe so users don't habitually leave the box checked, adjust voltages too low, click apply and end up in a boot loop.
It's impossible to see if the adjustments are stable or not without running them on your phone. Every phone is different, even two phones of the same model. The only test for instability is stressing your phone at each frequency and seeing if it locks or not.
The SVS adjustment shows all frequencies the phone can support. Whether or not your phone ever uses the frequency is dependent on the governor and kernel that you are using

IncrediControl v1.4:
This is mostly a bug fix release but I have also added:
Automatic detection of the minimum and maximum voltages supported by your kernel
Unless any more bugs arise, the next release will have some new goodies to play with...
http://www.incredikernel.com or from the market.

We don't have any havs kernels for now.
Sent from HydrOG3N MOD DHD.

also supports the DeamonOC?

Paradoxxx said:
We don't have any havs kernels for now.
Sent from HydrOG3N MOD DHD.
Click to expand...
Click to collapse
Yeah, it seems only qsd8x50 processors have HAVS, others seem to all be SVS. The app supports both though.
DubelBoom said:
also supports the DeamonOC?
Click to expand...
Click to collapse
I'm unfamiliar with DeamonOC, can you clarify what it is for me?

[KERNEL] Discontinued: FusterCluck Kernel (39a) CM/AOSP/Stock

Disclaimer:
I'm not responsible for any damage caused to you or your device. If you lose your job because your phone fails to wake you up, I'll sympathize, but take no responsibility. If your phone turns into a transformer and destroys the world, don't point the finger at me. You are flashing this AT YOUR OWN RISK.
Click to expand...
Click to collapse
This should work on all CM/AOSP based roms, stock support has been re-implemented. Use of UKM for synapse to work (at all) requires init.d. Most stock based roms should have this, but a rooted OTA won't unless you added it (lots of methods, Google around a bit).
Hi Everybody. Since I haven't seen anyone making custom kernels yet for us for the 39A base, I decided I'd try pulling in some features that I use on a regular basis into the kernel source.
Most everything in this is pulled from ( in no particular order ) Faux123, Showp1984, flar2, Renderbroken, Dorimanx, Jackpotclavin, xdabbeb, Rashed, Myfluxi, franciscofranco, tsunamical and other sources. So, all credit goes to them.
I've switched over to Synapse/UKM for this, seems that most everything works properly in it. I've changed francosound slightly, so you'll need to use the modified UKM linked at the end of this post, then install synapse from the playstore.
Features:
Added Intelliactive, Intellimm, Smartmax, ElemantalX, Bacon, Imupulse, ZZmove, and Yankactive governors.
Added Intelliplug (Set as default through
Added FrancoFranciso's sound driver. (Mic, Headphone, Speaker, Camera Mic volume control)
Added 389Mhz GPU step
Enabled Extra I/O schedulers and TCP congestion methods
Enabled Kernel Same Page Merging.
All builds are permissive.
Added Bricked Hotplug
Added Bricked Thermal
Added UserSpace CPU Frequency Voltage Table
MsM Limiter from NeoBuddy89
FastCharge from Dorimanx
Added a post boot script that will provide tweaked defaults (basically what I use minus undervolting)
Exposed PVS and SPEED bin values to Synapse for informational purposes.
Misc Tweaks/Optimizations/Battery Saving Optimizations
Screen turn on bug fixed courtesy of JackPotClavin
Stock Builds should work correctly now. (bluetooth and back led issues should be corrected)
F2FS support
Known Issues:
None
I'll work on things as I get time, but I'm not promising anything as this is simply a kernel that I'm making for the features I typically use. A lot of code has changed in the new kernel source making it hard to import features, so it's slow going. Also, sorry for the kernel name, I didn't have anything creative at the time.
Source: Github
CONVERTING DATA TO F2FS WILL WIPE YOUR SDCARD DATA AS WELL. Ensure that you have a backup of everything on your computer before doing so as this is unrecoverable. For R3, with F2FS you'll want this repacked TWRP. It has this kernel packed into it, with better f2fs support libraries (thanks XDABBEB). Also, be aware that encryption is not currently enabled with F2FS partitions in the way that I have it configured.
Downloads:
R3 - Fixed Bluetooth and PowerManagerService.Display Wakelock
CM-R3-B3
Stock-R3-B3
*Caution with R3, I've been running F2FS on the CM build for a couple days now with now issues. Stock booted and mounted for me, but I couldn't find a tester to evaluate it.*
CM-R3-Build1
Stock-R3-Build1
UKM has also been updated (link below). No new functionality, just cleaned up some of the stuff that didn't apply to our phone.
Old Builds:
CM-R2-Build3
Stock-R2-Build3
Modified UKM: 3.8.1-Mod6-Fustercluck (Source) - Apb_Axel's Original Thread Huge Thanks to him for his work making UKM.
Remember to hit the "Thanks" if you're enjoying this kernel.

For anyone who wants to build from this, I've included the toolchain , ramdisk, and a build script in the github repo. As long you have a build environment setup, you should get a flashable zip in the zips folder just from running the included build.sh script.
*edit*
I've removed the toolchain and all git references to it. It was causing the repo to be far larger than it needed to be. It's easy enough to find a toolchain (I've been using sabermod) and place it in the directory the build script expects. The one I use is Sabermod 5.1
Edit:
Development will be halted as my g2 digitizer is failing and I'm likely to upgrade to a nexus 6.

This kernel is SORELY needed. Constantly torn between being on 5.1 vs. 5.0.2 or JB vs. KK aboot, etc. And now I finally feel like I can have it all. Thank you! Working great so far on Euphoria ROM.
Only suggestion would be making the kernel default to be selinux permissive, especially with Google pulling an Apple and banning many of the selinux modifying apps from the playstore.
Thanks again!

bbender716 said:
This kernel is SORELY needed. Constantly torn between being on 5.1 vs. 5.0.2 or JB vs. KK aboot, etc. And now I finally feel like I can have it all. Thank you! Working great so far on Euphoria ROM.
Only suggestion would be making the kernel default to be selinux permissive, especially with Google pulling an Apple and banning many of the selinux modifying apps from the playstore.
Thanks again!
Click to expand...
Click to collapse
Yeah, I'll put up a build that's permissive. But d-h.st is being a pain right now and not actually letting me upload.
I was going to write up a post about the dangers of permissive kernels, then saw avc denials for an init.d script, netmgrd, sensors.qcom, and busybox in my dmesg (of course I was going to check before I posted)...
Just remember though enforcing stops things from running out of context. It's a security features and that's why google's removing the apps that let you change it. Permissive lets everything do whatever it wants and just logs that it should have been denied (dmesg | grep "avc"). So essentially, it's like installing an antivirus on your computer then disabling it but letting the system tray icon give you a warm fuzzy. Antivirus is a bad analog because it's really more like user policies, but you get the point.
*edit*
for now, I'll just attach the permissive build to this post. I'll need to wait till d-h.st gets it together. Maybe, I'll look for a better file server.

Does this have Bacon or smartass? If not is it a possibility in the future?

Yeah, I'll work on grabbing them. I'll need to find a good version of bacon from somewhere though that hasn't been too tweaked/modified.
Also, I'm moving to androidfilehost. for hosting. d-h.st just wasn't working out. I'd like to find somewhere that gives ftp access so that I could just upload builds at the end of my build script, but I guess that's not a huge deal.
Anyway, the new folder will be: https://www.androidfilehost.com/?w=files&flid=29865
The build numbers are just there to help me keep track of what file I'm on and need to flash for testing, don't let them get you confused if there are missing numbers in that folder... they just weren't worth uploading, or the build failed.
Also, how is the fauxsound stuff working out for everyone? I feel like it's pickup up the register values wrong or something... I'm not quite sure yet. But the sound seems too quiet on the low-end, but at least boosting the high-end works.

Just gonna throw this out there since you arm like a hands on dev, what are your personal settings? Default? I'm super excited for this kernel but after using dori for a while, the feature creep became somewhat mind boggling.

BOY_ said:
Just gonna throw this out there since you arm like a hands on dev, what are your personal settings? Default? I'm super excited for this kernel but after using dori for a while, the feature creep became somewhat mind boggling.
Click to expand...
Click to collapse
I'm not really comfortable being called a dev, I have some understanding of what's going on but the real devs are the guys that I gave credit to in the OP. Really, I'm just pulling in their work and making little changes here and there to make it work.
Personally, I run intelliactive with intelliplug and westwood with zen set to 1024 (why I added those) but I don't tweak the settings. I've never really seen a reason to, the governors are pretty smart. Of course, if you know what you're doing you can always fine tune them some based on your personal use types.
As far as feature creep... Read up on the different things. Figure out what works for you, ignore the rest. Really, it's just there because ya know... different strokes for different folks.

That's exactly the answer I was looking for. Thank you!

New build (30) up, sorry for the number jump... took a good few build tries getting the governors to play nice.
This added Smartmax, ZZmove, and Yankactive.
Should also fix GPU freq reporting. Previously, it wasn't reading correctly.
*edit*
Seems some of these new governors don't play so nice under use, at least not for me. They govern, but it seems like my device is locking up or not turning the screen back on with them. Looks like they need a little polishing.

I am using Intelliactive as well, on Euphoria v1.1, which sticks, but Intelliplug does not.
Also, only Smartmax worked for me with the new governors, but the others rebooted my phone almost instantaneously.
~ Sent from my VS980 ~

360Razir said:
I am using Intelliactive as well, on Euphoria v1.1, which sticks, but Intelliplug does not.
Also, only Smartmax worked for me with the new governors, but the others rebooted my phone almost instantaneously.
~ Sent from my VS980 ~
Click to expand...
Click to collapse
Thanks for the feedback.
Yeah, I ended up just removing zzmove and yankactive for now but added bacon and impulse. I'm not sure what exactly is going on with those two, but they kept trying to switch the devfreq governor to one that I shouldn't have included to begin with, the calls it used I don't think are present anymore. Which could very well be the reason they were freezing.
The intelliplug is a little weird too depending on which tuning app you use. Synapse lets it stick, but never shows that mpdecision turned off. Kernel auditor shows both on, but trickstermod shows that it correctly. ...kinda weird and I don't trust the apps to be honest. The sysfs values for intelliplug is toggling and the mpdecision binary stops running (at least with trickster) so those apps could be doing any number of things wrong.

Thanks for continuing to tinker and your analysis. I just did a reboot and checked Kernel Adiutor and even the governor is not sticking. I will try Trickster, as I am used to that app, but agree with you, each can be doing something wonky with your kernel.
~ Sent from my VS980 ~

Phone feels faster after this kernel, loving that. As for synapse, it tells me no UCI support and that's the end of that. I found kernel adiutor and it seems to be alright. The headphone amp doesn't seem to want to change which is annoying since I really want that. I think I'm just gonna clean flash the next euphoria build. Congrats on the first kernel for 39a roms.

joedajoester said:
Phone feels faster after this kernel, loving that. As for synapse, it tells me no UCI support and that's the end of that. I found kernel adiutor and it seems to be alright. The headphone amp doesn't seem to want to change which is annoying since I really want that. I think I'm just gonna clean flash the next euphoria build. Congrats on the first kernel for 39a roms.
Click to expand...
Click to collapse
Yeah, the headphone poweramp is buggy. I still think it's an issue because I pulled Shamu's (Nexus 6) fauxsound. But you still get the volume boost with the headphone volume choice. For synapse to work at all on most kernels now you need to download and flash teh UKM script.
But yeah, there are still things that are buggy. Which is why I'm leaving this labeled as an alpha for awhile.
I've been working on governors most of the day, I'll reply here when I get an update posted.

Yeah, FauxSound thru the speakers just cuts in and out, mostly out.
Xdabbeb's 982.5 on ART for VZW LG G2

jesssiii said:
Yeah, FauxSound thru the speakers just cuts in and out, mostly out.
Xdabbeb's 982.5 on ART for VZW LG G2
Click to expand...
Click to collapse
That's odd, I listened to my phone through the speakers for a good few hours yesterday moving my inlaws. Didn't notice any cutting in and out.
Can you tell me what values you have in: /sys/kernel/sound_countrol_3/gpl_speaker_gain ?
I have "2 2" at the moment, but I have my speakers down... typically I've been holding them at "5 5"
Also, are you using anything like viper? Are you using this on a CM12.1 based 39a rom?
*edit*
Also, New build up. https://www.androidfilehost.com/?fid=96039337900114170
Removed a few of the unused Devfreq governors (for gpu).
Added ElementalX, Bacon, and Impulse Governors. Removed ZZmove and Yankactive
Changed some compile flags, might give better performance.
Misc tweaks.

Another Build: https://www.androidfilehost.com/?fid=96039337900114287
Added in Bricked Hotplug and Bricked Thermal.
I may be a bit slower on adding things and building the next couple days... weekends over.

Yoinx said:
Another Build: https://www.androidfilehost.com/?fid=96039337900114287
Added in Bricked Hotplug and Bricked Thermal.
I may be a bit slower on adding things and building the next couple days... weekends over.
Click to expand...
Click to collapse
You've been busy! So what is your setup now?
~ Sent from my VS980 ~

360Razir said:
You've been busy! So what is your setup now?
~ Sent from my VS980 ~
Click to expand...
Click to collapse
No different, I just prefer bricked thermal over the normal one. I usually set the temp limits 2 or 3 below the defaults.
I'm just trying to get the features added so that people have options. I sent faux a message, I don't really expect a reply because I'm sure he's pretty busy.... But figure is give it a shot to see if he can help with the faux sound issues.
Once that's worked out, everything should be fairly stable. Then I can try to figure out what's up with some of the tuner apps not recognizing things correctly.

CPU load with custom CM13 kernels

Guys.. With every Android since the 2.x, you could activate the "Developers Options" and activate an option called "Show CPU usage".
"The numbers show the average load of the CPU in different time intervals. From left to right: last minute/last five minutes/last fifteen minutes"
My doubt: When I install any CM13 ROM (now I'm with Exodus) on my S5 (G900M), the load, after some minutes, are always near 10. Now I'm staring at it, with many apps installed (whatsapp, facebook, uber, maps, messenger, firefox, mx player, es file explorer, foursquare, traceroute, wifi analyzer, gmail, imo, os monitor, tinder, fing, poweramp, mindroid, remote desktop, 99, youtube, andsmb, diskusage, soundhound, photos, dropbox, goseek, instagram, juicessh, google now, picsplay, speedtest, skype, swiftkey, stabilitytest... just to name some...) and it's 11.32 / 14.37 / 23.11
Now the problem: whenever I install Boeffla Kernel or CrazyKernel, the load is ALWAYS higher.. always nearing 20. With default options, or trying to tweak the cpu options in both kernels.. and the bigger problem is that I SENSE that. The phone seems to RUNS SLOWER.
ps: If you LOCK your device (or let it lock by the timeout), this "load" value will raise because the cpu will also run slower.. it doesn't mean it's working more, just that more work is queued to the cpu, as it doesn't NEED to work on it (because it's locked/screen turned off, etc)

Hi,
I guess everyone will have that. So the poll is quite useless.
The reason for it, as I tracked down:
Two governors (intellimm and slim) are adding overhead to the system, even when they are not used.
Why? I do not know, as I am not the developer of these governors.
But for a test, I removed them from beta11 and compiled it as a beta11test1 version, attached here.
Let me know if removal of these governors lowers the cpu utilization for you down to stock levels almost.
Andi

Lord Boeffla said:
Hi,
The reason for it, as I tracked down:
Two governors (intellimm and slim) are adding overhead to the system, even when they are not used.
Why? I do not know, as I am not the developer of these governors.
But for a test, I removed them from beta11 and compiled it as a beta11test1 version, attached here.
Let me know if removal of these governors lowers the cpu utilization for you down to stock levels almost.
Andi
Click to expand...
Click to collapse
Wow that was fast. I'm testing right now and yes, the CPU load is *finally* down to ~11 like it were with vanilla CM13 kernel (which I think is what Exodus uses).
Still I get a little lag here and there mostly when "loading" stuff (like when clicking in a group chat on whatsapp, which needs to open a huge .db to display the history.. I think).....
But nice work.. I wonder what more could be optimized.. it's strange to a vanilla kernel be snappier than a custom .. given the experience you have..
Thanks

fbs said:
Wow that was fast. I'm testing right now and yes, the CPU load is *finally* down to ~11 like it were with vanilla CM13 kernel (which I think is what Exodus uses).
Still I get a little lag here and there mostly when "loading" stuff (like when clicking in a group chat on whatsapp, which needs to open a huge .db to display the history.. I think).....
But nice work.. I wonder what more could be optimized.. it's strange to a vanilla kernel be snappier than a custom .. given the experience you have..
Thanks
Click to expand...
Click to collapse
I am not sure vanilla stock kernel is more snappy. I feel it is the other way round personally. But this is about expectations and perception. Also it is about what is important for one. A custom kernel gives you many other goodies that might of course compromise in other areas. Nothing is for free.
And I personally prefer some other features over pure performance.
But well, that's it. I will not do more, having in mind the s5 kernel is only my #5 kernel in terms of priority. Sorry.
Andi

Lord Boeffla said:
I am not sure vanilla stock kernel is more snappy. I feel it is the other way round personally. But this is about expectations and perception. Also it is about what is important for one. A custom kernel gives you many other goodies that might of course compromise in other areas. Nothing is for free.
And I personally prefer some other features over pure performance.
But well, that's it. I will not do more, having in mind the s5 kernel is only my #5 kernel in terms of priority. Sorry.
Andi
Click to expand...
Click to collapse
Now I'm on boeffla-config trying to tune "interactive" governor and it says it's not tunable. it was before this test version. Maybe the removal of that other governors screwed up boeffla-config listing of whats tunable or not.. ? check this out too please..

fbs said:
Now I'm on boeffla-config trying to tune "interactive" governor and it says it's not tunable. it was before this test version. Maybe the removal of that other governors screwed up boeffla-config listing of whats tunable or not.. ? check this out too please..
Click to expand...
Click to collapse
Well, not such an issue here. I can enter tunable mode.
Reset your app via the apps maintenance menu.
But you know, you are on a completely unsupported test kernel. Just to say that again.
Andi

Lord Boeffla said:
Well, not such an issue here. I can enter tunable mode.
Reset your app via the apps maintenance menu.
But you know, you are on a completely unsupported test kernel. Just to say that again.
Andi
Click to expand...
Click to collapse
Right, but given the test was a success, you'll remove these governors for good, right?

fbs said:
Right, but given the test was a success, you'll remove these governors for good, right?
Click to expand...
Click to collapse
Yes, already announced everywhere (here on xda, as well as on Twitter and on my site).
Andi

[KERNEL][OPX][LineageOS] FrancoKernel - r11 - 12th Dec

Hi all.
Compatibility:
Builds starting with r5 compatible with Android Nougat 7.1.1 LineageOS or roms built from LineageOS sources.
Download:
From my webserver choose the Kernel with the most recent version number. Older releases for older Android versions are in the parent directory:
https://kernels.franco-lnx.net/OnePlusX/7.1.1/anyKernel/
or from my Updater app. It's just easier and more convenient:
https://play.google.com/store/apps/details?id=com.franco.kernel
Installation:
Flash the zip in your recovery
or
Auto-flash from Franco Kernel Updater app
Features:
1 - Legendary battery life
2 - Flash & forget
3 - Typical interfaces like display adjustments, sound control, vibration control, and all that boring stuff
4 - Idle power consumption reduced to the absolute minimum (if you have wakelocks from 3rd party apps you're obviously on your own)
5 - Support for FKUpdater's Performance Profiles
6 - Magical support, I'm here every day, checking posts almost hourly, ready to help anytime (well, unless you fail to read the OP, which contains most info you need)
7 - Seemless integration with my app FKUpdater
8 - No crap placebo patches, or "magical" optimizations
9 - Probably more, check my github for all the details - the code speaks for itself
Changelog:
https://kernels.franco-lnx.net/OnePlusX/7.1.1/appfiles/changelog.xml
Source:
https://github.com/franciscofranco/onyx
Follow me on the interwebs
Google+
Twitter
Google+ FK community
https://plus.google.com/u/0/communities/117966512071636110546
Franco Kernel: Manager & Updater demo
Disclaimer to moderators:
Slight OT is fine, but when users decide to act stupid they should be dealt with with the appropriate means - its really annoying for me when OT turns crazy. Please put the warning/ban hammer anytime any of you think there's lack of respect and/or too much unwanted OT crap - but if it doesn't meet this criteria let the OT posts alone. Thank you.
Cheers!

Good to see you around here!
Thought I would add more to this and make it useful for a few users.
The reason behind why Mpdecision is disabled by default is due to the fact that it is highly inefficient in the sense that hotplugging on Linux, put simply, sucks. Why? The hotplug acts as a front-end to the scheduler to provide a means of plugging and unplugging cores in exchange for a high amount of latency. This means that even though a core may be plugged, there is a delay of several milliseconds before this is actually processed causing microstutters that are hard to notice, but do disrupt performance. The same can be said for the thermal driver and how it Aries frequencies.
Now that that is over with, I'd just like to thank Franco. My device has never been faster. Even with an undercooked, it is still performing better than ever. Especially love the ZRAM tweaks, and how you properly configured CPU boost. Some people make it way too aggressive... It's the little things, and the huge steps forward in the source code that make your work so great! Best of luck

My apps have been updated to support the One Plus X too, both free and paid apps.

Damn legendery dev with his awesome kernel is here. Thank you!
Wish you're kernel for CM13/14 [emoji1]

Flash it, all fine, better later than never,

Didn't work for me coming from LOS (17/03/02 build) with Boeffla kernel. Wiped cache and dalvik, flashed fk r1 and bootloop. Phone kept returning to the boot splash screen and then straight to recovery. Looking forward to solving. Thanks for now.
Sorry, I was clearly not fully awake when I posted this. I read OxygenOS and interpreted as LineageOS.
Still, I hope someday we can run FK kernel on LOS.
Thanks anyways.

Omg .....Dream come true....Thank you franco

Thanks for the kernel, Franco!
It's a shame that it only supports OOS.
FYI I installed it on Sultan's CM13 and everything works fine except dt2w. The switch in settings does nothing and there is no switch in Kernel Adiutor. I hope that your kernel will be compatible with CM/AOSP based roms in the future.
Edit: Wifi is also not working.

franciscofranco said:
Hi all.
Compatibility:
Builds starting with r1 compatible with OxygenOS or roms built from OxygenOS sources.
Download:
From my webserver:
https://kernels.franco-lnx.net/OnePlusX/6.0.1/anyKernel/
or from my free Updater app:
https://play.google.com/store/apps/details?id=com.franco.kernel.free
Installation:
Flash the zip in your recovery
or
Auto-flash from Franco Kernel Updater Free app
Features:
1 - Legendary battery life
2 - Flash & forget
3 - Typical interfaces like display adjustments, sound control, vibration control, and all that boring stuff
4 - Idle power consumption reduced to the absolute minimum (if you have wakelocks from 3rd party apps you're obviously on your own)
5 - Support for FKUpdater's Performance Profiles
6 - Magical support, I'm here every day, checking posts almost hourly, ready to help anytime (well, unless you fail to read the OP, which contains most info you need)
7 - Seemless integration with my app FKUpdater
8 - No bull**** placebo patches, or "magical" optimizations
9 - Probably more, check my github for all the details - the code speaks for itself
Changelog:
https://kernels.franco-lnx.net/OnePlusX/6.0.1/appfiles/changelog.xml
Source:
https://github.com/franciscofranco/onyx
Google+ FK community
https://plus.google.com/u/0/communities/117966512071636110546
Franco Kernel: Manager & Updater demo
Disclaimer to moderators:
Slight OT is fine, but when users decide to act stupid they should be dealt with with the appropriate means - its really annoying for me when OT turns crazy. Please put the warning/ban hammer anytime any of you think there's lack of respect and/or too much unwanted OT crap - but if it doesn't meet this criteria let the OT posts alone. Thank you.
Cheers!
Click to expand...
Click to collapse
shatteringlass said:
Didn't work for me coming from LOS (17/03/02 build) with Boeffla kernel. Wiped cache and dalvik, flashed fk r1 and bootloop. Phone kept returning to the boot splash screen and then straight to recovery. Looking forward to solving. Thanks for now.
Click to expand...
Click to collapse
Read OP's first post again...

Facing heating issue...
Everything else is buttery smooth.

Hello bro i need permission regarding your kernel on one plus x i have ported a one plus x rom and i wanna use it one plus one the kernel is working fine in one plus one( I skipped the device checking and made it work)
would be great if you allow me to use it
Thanks

Why are always 4 cores online?
Edit: Got answered on Franco's twitter

shatteringlass said:
Didn't work for me coming from LOS (17/03/02 build) with Boeffla kernel. Wiped cache and dalvik, flashed fk r1 and bootloop. Phone kept returning to the boot splash screen and then straight to recovery. Looking forward to solving. Thanks for now.
Click to expand...
Click to collapse
Not compatible with LineageOS yet. It's written in the OP.
Kolio_xda said:
Thanks for the kernel, Franco!
It's a shame that it only supports OOS.
FYI I installed it on Sultan's CM13 and everything works fine except dt2w. The switch in settings does nothing and there is no switch in Kernel Adiutor. I hope that your kernel will be compatible with CM/AOSP based roms in the future.
Edit: Wifi is also not working.
Click to expand...
Click to collapse
It won't work on Sultan's, he uses a very specific Kernel with specific changes that only work on his specific rom build.
W!ld said:
Facing heating issue...
Everything else is buttery smooth.
Click to expand...
Click to collapse
There's no heating issue. The device throttles just fine when under stress. I run several CPU stability tests before I push a new Kernel...
Dhairya said:
Hello bro i need permission regarding your kernel on one plus x i have ported a one plus x rom and i wanna use it one plus one the kernel is working fine in one plus one( I skipped the device checking and made it work)
would be great if you allow me to use it
Thanks
Click to expand...
Click to collapse
I don't understand what you're asking. Use what where?

@franciscofranco Thanks for this!
Waiting for LineageOS 14 (and all based ROMs) support. Most people don't really use OxygenOS since it's slow and buggy

Calvin2394 said:
@franciscofranco Thanks for this!
Waiting for LineageOS 14 (and all based ROMs) support. Most people don't really use OxygenOS since it's slow and buggy
Click to expand...
Click to collapse
It's not slow with FK, at all. I made sure of that. There was a specially bad issue that I reported to OP 1 year ago, which makes the device have a gigantic stack of uninterruptible threads after a while on screen off. My record was a load average close to 200, 200, 200 which is insane and destroyed the device's performance. That's fixed on FK. Also all cores are online at all times, there's no need to shut down 2 cores, and mpdecision is disabled so that it doesn't mess with the devices performance.

thanks finally the great franco kernel is here damn really appreciate your work

Something really worth for the OnePlus X after a long time. I have been waiting for this day. Thank you.

franciscofranco said:
It's not slow with FK, at all. I made sure of that. There was a specially bad issue that I reported to OP 1 year ago, which makes the device have a gigantic stack of uninterruptible threads after a while on screen off. My record was a load average close to 200, 200, 200 which is insane and destroyed the device's performance. That's fixed on FK. Also all cores are online at all times, there's no need to shut down 2 cores, and mpdecision is disabled so that it doesn't mess with the devices performance.
Click to expand...
Click to collapse
yeah really i underclocked the cpu to 1957 ghz and input boost enabled to 652mhz, the phone literally flies on oxygen os. Also the antutu score is 55222,literally made my day thanks a lot
One wierd thing though, kernel auditor shows my battery capacity to 3000mah, is it true?? or is it after the kernel, anyways its buttery smooth.. magical

Androidoo said:
yeah really i underclocked the cpu to 1957 ghz and input boost enabled to 652mhz, the phone literally flies on oxygen os. Also the antutu score is 55222,literally made my day thanks a lot
One wierd thing though, kernel auditor shows my battery capacity to 3000mah, is it true?? or is it after the kernel, anyways its buttery smooth.. magical
Click to expand...
Click to collapse
Battery size is 2525mAh.

Hi, I flashed your kernal yesterday, all great and the device is buttery smooth but just one thing I noted. When ever the phone goes into to deep sleep the device doesn't wake up on pressing the power button. Have to restart the phone by long pressing the power button. And I haven't changed anything using the kernal adiutor app, just using your default settings.
Can you kindly guide me if something is wrong from my side. May be if you want a log I'll try to pull out a log tonight.
Thanks alot for your work.

[KERNEL][FORK]Radioactive Kernel V2.2.5 [2021.07.28][OOS/CUSTOM ROMS][UNIFIED OP8/OP8Pro/OP8T] 295-920Mhz GPU + WL Blocked + Adreno Boost

str8str said:
Can I get a link to try this? Tia
Click to expand...
Click to collapse
Updated 7/31/2021 rebased on Acuicultor's v2.2.5 rebase (OOS) and rebase_custom (custom ROMs).
[NOTE: Bug reported - with a Magisk Module I created to fix it. For some strange reason (code looks fine), some systems are setting the default GPU frequency to 920mhz and default power level to 0 (max). I have posted a small Magisk Module that waits 5 seconds then corrects these values (295mhz default and power level 8). It's on the GitHub release page - MOD-GPU-Set-Min-Freq.zip. Just install with Magisk Manager as a module / install from storage after downloading.]
This is a tweaked version of RadioActive kernel by acuicultor modded for higher performance and lower idle drain. All source commits and releases are on my GitHub fork:
https://github.com/mrslezak/Radioactive_kernel_oneplus8/releases/tag/v2.2.5-MOD
PLEASE read the Readme as well as the disclaimer. Whenever you flash a custom kernel, you do so at your own risk. I recently rebased on the dev's work (GPU_OC OOS branch, never released) and set the wakelock blocks up myself (lower idle drain, tested over a week with no loss in functionality), dropped the base GPU frequency to 295mhz and raised the top ones (800/920mhz) acuicultor you're an awesome dev, great to have you around! All credits should go to him other than my tweaks.
I also merged all the same changes into the Custom ROM branch which didn't have GPUOC or AdrenoBoost - several people are using it now but it's marked as a BETA since I am on OOS (latest Global) and can't test it myself. NOTE: many people on the TG channel I posted to have tried it and have had no issues on Op8, Op8 Pro, and Op8T.
Note if you are one of the rare people who see artifacts in games or benches, the easiest fix is to go into your kernel manager and set the max GPU frequency to 800mhz and apply on boot. Not all 865 Adreno GPUs are created equal. I haven't seen one that couldn't handle 900mhz to date, but enough people have had no issues at 920mhz so that's where I put it.
Be sure to flash Magisk before installing, then use EX Kernel Manager or FK Kernel Manager to Flash the kernel zip. It has all the same optimizations of RadioActive kernel, just modded for really nice performance and low battery drain. Adreno Boost is set to low on default which makes it react faster as the GPU scales. If you already have Magisk installed, there is no reason to reinstall it - the AnyKernel 3 zip installer will use what's installed already.
I put one out there you can just flash from: fastboot flash boot 4.19.110.RadioActive-WL-295_UC-920-GPU-2.2.5.img (OOS only) as it saved my a$$ a couple times when flashing or trying to apply an incremental update when rooted (no success, although I posted the incremental update on TG, the payload just won't extract properly to update using fastbootd scripts)... Maybe I'll post it here on XDA and see if anyone can extract the latest Op8T update.
Also someone sent me a PM about using KonaBess app to change frequencies even more, or change regulators, or change the DDR clock speeds. Yes, it works. Note you probably should only play with that if you have a fastboot image available in case it doesn't boot! I did just upload one for OOS to the repo as I mentioned above. Be warned, you're on your own there.
Hope you all enjoy!
- MattOfTheDead / Red Magic 5G MOD kernel (Q) / Xiaomi Mi9 / Mi9T Pro MOD kernels (Pie/Q) / next in line is probably a 2022 device - 888s didn't make the cut

mslezak said:
Join the Telegram group called OnePlus 8 | 8T Series and you'll find that and my modded versions there as well. Just search for 920 the latest one will pop right up. Actually about to rebase on the dev's excellent work and set the wakelock blocks up myself, dropping the base frequency and raising the top one. acuicultor you're an awesome dev, great to have you aboard! - MattOfTheDead / Red Magic 5G MOD kernel (Q) / Xiaomi Mi9 / Mi9T Pro MOD kernels (Pie/Q) / next in line is probably a Realme GT.
Click to expand...
Click to collapse
Kernel for custom A11 or OOS only?

jamescable said:
Kernel for custom A11 or OOS only?
Click to expand...
Click to collapse
I built both just moved some commits over from the GPU_OC branch and added my own to custom. I have no way to test it but several others did already. All I've heard is great feedback and running faster than OOS. Of course it depends on the ROM.

mslezak said:
I just built the OOS one... custom I don't think there's a GPU_OC branch to rebase on. I deleted my other repo with changes and just switched to the dev's work since it was nicely done. I'm always running OOS I don't really care to run a custom ROM. Although I imagine it would be pretty easy to add his commits from the OC branch to the custom one, you never know what issues you'll encounter when doing so... And I don't really feel like building a kernel I won't use. I already converted it over from a carrier locked phone. Happy enough it runs on Global OOS ROM. I've run a few custom ROMs before like Lineage, Evolution-X, I always end up back on OOS. Just like having a fast phone with no lag where I can open any number of apps and get work done quickly without waiting for anything to load.
Click to expand...
Click to collapse
Thanks for this man. Will be looking for your kernel edit on telegram.

jamescable said:
Custom kernel for A11 or OOS only?
Click to expand...
Click to collapse
mslezak said:
I just built the OOS one... custom I don't think there's a GPU_OC branch to rebase on. I deleted my other repo with changes and just switched to the dev's work since it was nicely done. I'm always running OOS I don't really care to run a custom ROM. Although I imagine it would be pretty easy to add his commits from the OC branch to the custom one, you never know what issues you'll encounter when doing so... And I don't really feel like building a kernel I won't use. I already converted it over from a carrier locked phone. Happy enough it runs on Global OOS ROM. I've run a few custom ROMs before like Lineage, Evolution-X, I always end up back on OOS. Just like having a fast phone with no lag where I can open any number of apps and get work done quickly without waiting for anything to load.
Click to expand...
Click to collapse
I mainly wanted the wakeloxk blockers, and other battery saver stuff lol. Don't care about OC

jamescable said:
I mainly wanted the wakeloxk blockers, and other battery saver stuff lol. Don't care about OC
Click to expand...
Click to collapse
You can also underclock.

str8str said:
Can I get a link to try this? Tia
Click to expand...
Click to collapse
Release Radioactive Kernel V2.1.4 OOS Op8/Pro/8T Modded (+Custom BETA) · mrslezak/Radioactive_kernel_oneplus8
GPU underclocked to 295 base frequency, overclocked to 670/800/920mhz. Default Boeffla Wakelocks blocked to reduce idle battery drain. Default Adreno Boost set to low. A personal build based on ...
github.com

Just anyone who uses the modded kernels please read the disclaimer first. Readme on GitHub and releases page.

Modded Custom BETA is out with the same features of the OOS kernel in the post above. 295/800/920Mhz GPU, Adreno Boost with Low default, default Wakelock block list. Go to the same location to download if you'd like to try it out. And please, please read the DISCLAIMER there. Whenever you flash a kernel, you do so at your own risk. I am liable for nothing. If you want to see what I changed, switch to the custom branch. So far I have 5 people that have said "it's awesome" on Telegram, no issues reported as of yet.
Release Radioactive Kernel V2.1.4 OOS Op8/Pro/8T Modded (+Custom BETA) · mrslezak/Radioactive_kernel_oneplus8
GPU underclocked to 295 base frequency, overclocked to 670/800/920mhz. Default Boeffla Wakelocks blocked to reduce idle battery drain. Default Adreno Boost set to low. A personal build based on ...
github.com

mslezak said:
Modded Custom BETA is out with the same features of the OOS kernel in the post above. 295/800/920Mhz GPU, Adreno Boost with Low default, default Wakelock block list. Go to the same location to download if you'd like to try it out. And please, please read the DISCLAIMER there. Whenever you flash a kernel, you do so at your own risk. I am liable for nothing. If you want to see what I changed, switch to the custom branch.
Release Radioactive Kernel V2.1.4 OOS Op8/Pro/8T Modded (+Custom BETA) · mrslezak/Radioactive_kernel_oneplus8
GPU underclocked to 295 base frequency, overclocked to 670/800/920mhz. Default Boeffla Wakelocks blocked to reduce idle battery drain. Default Adreno Boost set to low. A personal build based on ...
github.com
Click to expand...
Click to collapse
RadioActive-WL-295-920GPU-custom-2.1.4-BETA.zip is the file for custom ROMs BTW if you don't read the notes (which you should). As I mentioned to the unhappy user you can always drop the max GPU in any kernel manager to 800mhz and set on boot if you got an inferior 865 although artifacts have only been reported by 1 person period. A more productive approach rather than bad mouthing someone trying to provide a free service is "can you build a version that maxes out at 900mhz?"... Respect please in the forums.

jamescable said:
I mainly wanted the wakeloxk blockers, and other battery saver stuff lol. Don't care about OC
Click to expand...
Click to collapse
Well I put up custom and OOS just use a kernel manager to set the high frequency you want it to stop at on boot. But before you do, here's a day of basically using the phone a lot at 120hz with many apps open. Note someone here didn't look at the SOT DRAIN which is 100/8.27 = 12hrs SOT. I didn't start it with a full battery. I do that on purpose start at 60% or so to see how it drains in the middle of the discharge. So I'd advise those that are quick to criticize, make sure you actually calculate something before saying it's "horrible" when it's as good as stock.

mslezak said:
Well I put up custom and OOS just use a kernel manager to set the high frequency you want it to stop at on boot. But before you do, here's a day of basically using the phone a lot at 120hz
Click to expand...
Click to collapse
That's horrible, considering auto gives me 9-12 hours screen on time, depending on what I am doing obviously

jamescable said:
That's horrible, considering auto gives me 9-12 hours screen on time, depending on what I am doing obviously
Click to expand...
Click to collapse
What is your setup I can only dream of these nos

jamescable said:
That's horrible, considering auto gives me 9-12 hours screen on time, depending on what I am doing obviously
Click to expand...
Click to collapse
You do realize that this is 12 SOT if you never let it sleep and use it all the time, look at the stats and do some math. 100%/8.27% = 12hrs SOT. Idle went up because I was on phone calls for an hour, and the screen turns off. It's usually 0.6%/hr if you're using it (on WiFi), 1%/hr on cell, turning it on and off every few minutes will cause more drain. I was using my phone a lot today that way. I would say that's amazing to get the same SOT on a modded kernel. I haven't optimized a thing in the ROM or notifications, just used the kernel. I don't care if you use it, do as you wish.

The best way to get help, or to find me is on the TG group. There are people there that can help you out if need be.

mslezak said:
You do realize that this is 12 SOT if you never let it sleep and use it all the time, look at the stats and do some math. 100%/8.27% = 12hrs SOT. Idle went up because I was on phone calls for an hour, and the screen turns off. It's usually 0.6%/hr if you're not using it, turning it on and off every few minutes. I was using my phone a lot today that way. I would say that's amazing to get the same SOT on a modded kernel. I haven't optimized a thing in the ROM or notifications, just used the kernel. I don't care if you use it, do as you wish.
Click to expand...
Click to collapse

mslezak said:
Anyway I'm tired of people requesting things and then getting completely incorrect information and yelling at me because they either can't do math or they don't know how to use a kernel manager. I can be reached on the TG group but you all are on your own now. All I hear are complaints for doing free work for people I don't even know, some of you need to learn some manners.
Click to expand...
Click to collapse
Ignore the haters and complainers...
I just flashed (RadioActive-WL-295-920GPU-custom-2.1.4-BETA.zip) over CR_Droid (CR 03/08 and 03/26 builds 8Pro) and it made a HUGE difference in smoothness, snappiness and performance. I don't worry too much about battery drain as we can top off our phones in less than 20 minutes a day. The under-clocking is also wonderful. I remember back in the G2 days we not only underclock, but would under-volt ALL the frequencies just a few ticks away from unstable for more battery life (dependent on the cpu bin ver), but not really that necessary anymore with larger batteries and super quick charges.
Much respect and appreciation and hope to see more tweaks and builds in the future

Agimax said:
Ignore the haters and complainers...
I just flashed (RadioActive-WL-295-920GPU-custom-2.1.4-BETA.zip) over CR_Droid (CR 03/08 and 03/26 builds 8Pro) and it made a HUGE difference in smoothness, snappiness and performance. I don't worry too much about battery drain as we can top off our phones in less than 20 minutes a day. The under-clocking is also wonderful. I remember back in the G2 days we not only underclock, but would under-volt ALL the frequencies just a few ticks away from unstable for more battery life (dependent on the cpu bin ver), but not really that necessary anymore with larger batteries and super quick charges.
Much respect and appreciation and hope to see more tweaks and builds in the future
Click to expand...
Click to collapse
Thanks bud, glad to hear good results with the kernel. On TG everyone has been full of compliments. Let's hope it stays that way here as well. We can conduct everything in a respectable manner.

Now if you REALLY want to save battery and your cell provider supports Voice over WiFi, Google Messages enable enhanced chat features and keep it on WiFi only (i.e. Bluetooth only on while you're using it, Location off unless you're navigating somewhere, NFC off unless you're using GPay, mobile data off), here's what I get being on my phone all day today (started under 60% battery) at 120hz: 7% active drain, 0.84% inactive. If you're asleep it's more like 0.4%. You won't miss any calls or texts either.

great, zero! drain during the bedtime that's awsome! thanks for the kernel upgrade