Related
Boot loop
Moto x 1060 rooted on 4.2.2 with TWRP 2.7.7.1 installed. I tried to restore. TWRP says restore completed but when I try to reboot into the loop I go. I can access TWRP but nothing else. I have two TWRP recoveries but neither works. My computer doesn't see the phone when connected, so I can't flash. Any help would be greatly appreciated.
Clownlike said:
Boot loop
Moto x 1060 rooted on 4.2.2 with TWRP 2.7.7.1 installed. I tried to restore. TWRP says restore completed but when I try to reboot into the loop I go. I can access TWRP but nothing else. I have two TWRP recoveries but neither works. My computer doesn't see the phone when connected, so I can't flash. Any help would be greatly appreciated.
Click to expand...
Click to collapse
why do u tried to restore if u have TWRP??
try to put in fastmode and flash the firmware again clean
or put in twrp and wipe cache,userdata and dalvik cache
hope that helps u
When I restore with TWRP it shows successful. Then when I boot it goes into a loop. I have 2 recoveries and they both do that. MY computer does not recognize it so I cannot flash.
Clownlike said:
When I restore with TWRP it shows successful. Then when I boot it goes into a loop. I have 2 recoveries and they both do that. MY computer does not recognize it so I cannot flash.
Click to expand...
Click to collapse
Your computer should recognize it in fastboot mode (NOT TWRP) - you need to be the bootloader screen (AP Fastboot Mode). Follow the guide in general "Return to 100% stock" to flash the entire SBF for your carrier. DO NOT ATTEMPT TO DOWNGRADE. Only flash the version you are currently on or higher.
Everything you need is in that thread, including the necessary drivers. If your phone isn't getting recognized it is either because you do not have the drivers installed, OR you are trying to connect when booted in to TWRP. Once again, this is wrong. You restore using your PC from the BOOTLOADER screen, NOT TWRP.
101
When I am in boot loader mode and try to connect with RSD Lite the phone is seen as "fast boot" connected but nothing I flash works. I have done this before and the phone was recognized but after installing TWRP it is not, nor can I flash anything, it says failed.
Thanks Sam. I got RED lite to work and all is well. Again, many thanks
Clownlike said:
Thanks Sam. I got RED lite to work and all is well. Again, many thanks
Click to expand...
Click to collapse
Excellent! Glad to help. As you probably already know, you can now flash TWRP back on and re-root. Good Luck! :good:
P.S. I sent you a private message - please check your PMs.
samwathegreat said:
Excellent! Glad to help. As you probably already know, you can now flash TWRP back on and re-root. Good Luck! :good:
P.S. I sent you a private message - please check your PMs.
Click to expand...
Click to collapse
I cannot flash or install SuperSu or TWRP. I don't really want to install TWRP because that caused the original problem. I need SuperSu but when I try to install it says "there is no SU binary installed". Phone says device is unlocked and Status code 3 and I get the bootloader unlocked warning screen. Should I reflash 4.2.2 and start over?
Clownlike said:
I cannot flash or install SuperSu or TWRP. I don't really want to install TWRP because that caused the original problem. I need SuperSu but when I try to install it says "there is no SU binary installed". Phone says device is unlocked and Status code 3 and I get the bootloader unlocked warning screen. Should I reflash 4.2.2 and start over?
Click to expand...
Click to collapse
TWRP does not cause problems - likely your issue was un-related. You cannot install SuperSU without TWRP. You do need to flash TWRP - use the latest version from here: http://techerrata.com/browse/twrp2/ghost
After you flash it, type: fastboot reboot-bootloader and immediately boot into TWRP. Click exit and it will offer to root for you.
If you insist, you can flash stock recovery back on afterwards which will remove TWRP.
Finally decided to root my own device to find out that the recovery is not working when I try going into it on the bootloader mode. It is a rooted device and I've tried flashing the twrp recovery through the command prompt and also through the flashify app. It only works when I try booting in from the flashify app but doesn't work through the bootloader, when trying it through the bootloader i select the recovery and the phone turns off. Anyone have a clue of how I could try to make it work, I would appreciate any help. Thanks
Blue.F150 said:
Finally decided to root my own device to find out that the recovery is not working when I try going into it on the bootloader mode. It is a rooted device and I've tried flashing the twrp recovery through the command prompt and also through the flashify app. It only works when I try booting in from the flashify app but doesn't work through the bootloader, when trying it through the bootloader i select the recovery and the phone turns off. Anyone have a clue of how I could try to make it work, I would appreciate any help. Thanks
Click to expand...
Click to collapse
Looks like a system error which can be solved only if you flash the factory image again
which command did yu use "fastboot flash recovery (twrp File name ).img
If it didn't work, flash cwm and then twrp 8.6.0. Maybe it'll work Or flash twrp img while ur in twrp itself. Or download advanced reboot if ur using stock rom.
james11705 said:
Looks like a system error which can be solved only if you flash the factory image again
which command did yu use "fastboot flash recovery (twrp File name ).img
If it didn't work, flash cwm and then twrp 8.6.0. Maybe it'll work Or flash twrp img while ur in twrp itself. Or download advanced reboot if ur using stock rom.
Click to expand...
Click to collapse
Yea it was the fastboot flash recovery trwp.... then tried it and didnt work. Thanks I'll try out the other options you gave me. I tried reflashing stock everything and booting into recovery now it didnt work again with the stock recovery.
Blue.F150 said:
Yea it was the fastboot flash recovery trwp.... then tried it and didnt work. Thanks I'll try out the other options you gave me. I tried reflashing stock everything and booting into recovery now it didnt work again with the stock recovery.
Click to expand...
Click to collapse
Like flashing the full firmware? It should work, because something is wrong with ur recovery system.
james11705 said:
Like flashing the full firmware? It should work, because something is wrong with ur recovery system.
Click to expand...
Click to collapse
I have the same problem. Flashed the stock firmware. Then flashed TWRP in fastboot, but whenever i select recovery from the fastboot menu, the phone just shuts off. Only way to get into recovery is by Flashify app too...
Not really sure what I'm doing wrong. Last rooted phone was a Nexus 5, and that was of course painless to root and flash ROMs to...
I'm using a Verizon XT1096 with 5.1 on T-Mobile.
So I was able to get the bootloader unlocked via Motorola's website, now that Verizon is allowing them to do so. No problems there. My problem now is that I can flash a recovery, but if it reboots, the recovery is gone. And I can't get any recoveries to flash anything. I can't push an apk, root zip, or even a ROM. Says Installation Aborted, with no other error codes. Even tried CWM and disabling Signature Checking, which gives me more info, saying that the footer is mismatched. Phone does say the bootloader is unlocked though so that shouldn't be it...
Honestly, I'd just like to get it on CM12 until I can get a Nexus 6P.. Can anyone tell me if I'm doing something wrong? Or is there just no way to root yet? I figured even the XT1095 CF-Auto-Root method would work for 5.1, but no dice..
Not sure what to do here. Please move my thread if need be. Don't post here much...
I followed the instructions on the TWRP website (link below) and it worked flawlessly. One thing you have to do is, after running the "fastboot flash recovery twrp.img" command, make sure to manually scroll on the phone and reboot into recovery. Hope that helps...
https://twrp.me/devices/motorolamotox2014.html
There is a partition mismatch. So do this. Download supersu and place it in the phones memory. Boot to fastboot mode and then fastboot boot recovery.img rather than fastboot flash recovery.img. You will boot to twrp, install SuperSU then download twrp from the playstore and install thru the app. It works, that's how I did it. Also when booting to recovery from the fastboot menu choose recovery with the vol up key rather than power button.
RepeatUntilTheEnd said:
I followed the instructions on the TWRP website (link below) and it worked flawlessly. One thing you have to do is, after running the "fastboot flash recovery twrp.img" command, make sure to manually scroll on the phone and reboot into recovery. Hope that helps...
https://twrp.me/devices/motorolamotox2014.html
Click to expand...
Click to collapse
I thought I tried that but maybe not. I've read that some stock ROMs can and will overwrite the recovery upon booting, but I could be wrong. I'll look at that when I get home tonight.
oraixearl said:
There is a partition mismatch. So do this. Download supersu and place it in the phones memory. Boot to fastboot mode and then fastboot boot recovery.img rather than fastboot flash recovery.img. You will boot to twrp, install SuperSU then download twrp from the playstore and install thru the app. It works, that's how I did it. Also when booting to recovery from the fastboot menu choose recovery with the vol up key rather than power button.
Click to expand...
Click to collapse
Thank you, I'll try this tonight when I get home. This may solve it. I think I remember the bootloader spitting something out about a partition mismatch.. Will report back as soon as I try it.
So I went ahead and tried both your guys' methods.
Oraixearl, I figured your solution would work, but it actually didn't, to my surprise. It returned no results, as the root zip didn't end up doing anything.
RepeatUntilTheEnd's solution worked here. I guess I didn't try rebooting the phone after flashing the recovery, before going into it..
So here's what I did.
1.) Boot into bootloader
2.) Fastboot flash recovery [recovery.img]
3.) adb reboot bootloader
4.) Used keys on phone to go into recovery,
5.) Flashed root.zip
6.) Booted into OS, and ran root checker. Worked.
7.) To my surprise, TWRP stuck around, too.
Thank you guys!
TsarProdigy said:
So I went ahead and tried both your guys' methods.
Oraixearl, I figured your solution would work, but it actually didn't, to my surprise. It returned no results, as the root zip didn't end up doing anything.
RepeatUntilTheEnd's solution worked here. I guess I didn't try rebooting the phone after flashing the recovery, before going into it..
So here's what I did.
1.) Boot into bootloader
2.) Fastboot flash recovery [recovery.img]
3.) adb reboot bootloader
4.) Used keys on phone to go into recovery,
5.) Flashed root.zip
6.) Booted into OS, and ran root checker. Worked.
7.) To my surprise, TWRP stuck around, too.
Thank you guys!
Click to expand...
Click to collapse
Strange as it worked for me. I'm glad you got it sorted out tho. Cheers.
So I came from a stock lollipop Tmobile h811 non rooted
To stock MM v20i.
Ive tried flashing twrp 3.0 for cm13, and no matter what,
I get failed: (remote unknown command at the end after it sends recovery.
Its already unlocked(bootloader)
Thanks.
[email protected] said:
So I came from a stock lollipop Tmobile h811 non rooted
To stock MM v20i.
Ive tried flashing twrp 3.0 for cm13, and no matter what,
I get failed: (remote unknown command at the end after it sends recovery.
Its already unlocked(bootloader)
Thanks.
Click to expand...
Click to collapse
Type: fastboot boot (path goes here)
You can drag and drop the twrp img into the command window. This will ensure you have the correct path
[email protected] said:
So I came from a stock lollipop Tmobile h811 non rooted
To stock MM v20i.
Ive tried flashing twrp 3.0 for cm13, and no matter what,
I get failed: (remote unknown command at the end after it sends recovery.
Its already unlocked(bootloader)
Thanks.
Click to expand...
Click to collapse
Follow this instruction
http://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
mingkee said:
Follow this instruction
http://forum.xda-developers.com/tmobile-g4/development/stock-h811-20i-images-kdz-flashable-t3308227
Click to expand...
Click to collapse
That link doesn't really solve the OP's issue. I have the same issue. BUT - your link did show me that I can BOOT the .img file, I can't flash the .img file. I've verified the bootloader is unlocked by the fastboot getvar command.
I'm not sure what to do next. Installing OpenGapps causes a boot loop and the only thing I can do at this point is a factory reset with the OEM recovery since in the boot loop adb is unresponsive.
joesee said:
That link doesn't really solve the OP's issue. I have the same issue. BUT - your link did show me that I can BOOT the .img file, I can't flash the .img file. I've verified the bootloader is unlocked by the fastboot getvar command.
I'm not sure what to do next. Installing OpenGapps causes a boot loop and the only thing I can do at this point is a factory reset with the OEM recovery since in the boot loop adb is unresponsive.
Click to expand...
Click to collapse
The instruction shows how to flash recovery.img with TWRP though I have no clue how to do it.
I got that error the first time I did it, it was because of a misspelling of the command.
If you already unlocked the bootloader, while in fastboot, you only type "fastboot boot" + "path to twrp img on computer" OR instead of typing out the path, you may drag and drop the file into the command window.
Once it boots to twrp, flash twrp from within the booted img. That ensures you have permanent twrp.
If you were able to unlock your bootloader, the only thing stopping you from loading twrp is improper spelling and path to the img. Almost every error I have seen is from not following the directions.
Vseprz said:
If you already unlocked the bootloader, while in fastboot, you only type "fastboot boot" + "path to twrp img on computer" OR instead of typing out the path, you may drag and drop the file into the command window.
Once it boots to twrp, flash twrp from within the booted img. That ensures you have permanent twrp.
If you were able to unlock your bootloader, the only thing stopping you from loading twrp is improper spelling and path to the img. Almost every error I have seen is from not following the directions.
Click to expand...
Click to collapse
OK, just so I understand correctly, the proper sequence of events is to use fastboot to boot TWRP (which I can do) then, once in TWRP, I can then flash the twrp .zip file, right? Does anyone know if the LG's bootloader overwrites the recovery partition upon boot (in other words, do I have to boot straight to recovery after I flash to ensure it sticks?)
Sorry for the obtuse questions, I've got a lot of experience with Samsung flashing back in the KK and LP days, but not MM.
Thanks in advance!!
joesee said:
OK, just so I understand correctly, the proper sequence of events is to use fastboot to boot TWRP (which I can do) then, once in TWRP, I can then flash the twrp .zip file, right? Does anyone know if the LG's bootloader overwrites the recovery partition upon boot (in other words, do I have to boot straight to recovery after I flash to ensure it sticks?)
Sorry for the obtuse questions, I've got a lot of experience with Samsung flashing back in the KK and LP days, but not MM.
Thanks in advance!!
Click to expand...
Click to collapse
So you have flashed 20i which overwrites twrp with the stock recovery.
You then go through the steps for unlocking the boot loader.
After the boot loader is unlocked, you may boot into twrp with the fastboot boot command.
When that boots into twrp, flash twrp from within that to have it stick.
Have a question and maybe someone can help. Me getting carried away installed twrp from external partition. Now i cannot boot into recovery. Tried flashing using flashify and twrp manager. but flashify does not install after reboot and there is no option for h811 in twrp manager. Anyway to fix this?
Sent from my LG-H811 using Tapatalk
Vseprz said:
So you have flashed 20i which overwrites twrp with the stock recovery.
You then go through the steps for unlocking the boot loader.
After the boot loader is unlocked, you may boot into twrp with the fastboot boot command.
When that boots into twrp, flash twrp from within that to have it stick.
Click to expand...
Click to collapse
Yes, that's exactly the steps I do. I've flashed 20i. I used fastboot to boot into twrp. I then "install" the twrp zip file. Says it flashes with no issues. I then reboot the phone. Still has stock recovery.
I've confirmed my bootloader is unlocked with the fastboot getvar all. I've also tried all three versions of twrp available (.1, .2 and .3) and still doesn't work. Yet twrp works fine if I boot it.
joesee said:
Yes, that's exactly the steps I do. I've flashed 20i. I used fastboot to boot into twrp. I then "install" the twrp zip file. Says it flashes with no issues. I then reboot the phone. Still has stock recovery.
I've confirmed my bootloader is unlocked with the fastboot getvar all. I've also tried all three versions of twrp available (.1, .2 and .3) and still doesn't work. Yet twrp works fine if I boot it.
Click to expand...
Click to collapse
How did you confirm you have stock recovery? Did you use adb reboot recovery? Or did you use hardware keys to boot to it? Because if you use hardware keys you still get the initial confirm factory reset. You just have to accept then it boots to twrp.
---------- Post added at 10:44 AM ---------- Previous post was at 10:22 AM ----------
99problemz said:
Have a question and maybe someone can help. Me getting carried away installed twrp from external partition. Now i cannot boot into recovery. Tried flashing using flashify and twrp manager. but flashify does not install after reboot and there is no option for h811 in twrp manager. Anyway to fix this?
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
If boot loader is unlocked you should load twrp from fastboot.
Vseprz said:
How did you confirm you have stock recovery? Did you use adb reboot recovery? Or did you use hardware keys to boot to it? Because if you use hardware keys you still get the initial confirm factory reset. You just have to accept then it boots to twrp.
---------- Post added at 10:44 AM ---------- Previous post was at 10:22 AM ----------
If boot loader is unlocked you should load twrp from fastboot.
Click to expand...
Click to collapse
Hahaha now that's funny!! I bet I've been through 50 blog posts on various sites to try to figure this out. Having successfully installed Viper I didn't want to take the chance and pass that confirm wipe factory question.
I feel like a complete tool. Seriously, thank you for taking the time to respond to me!
joesee said:
Hahaha now that's funny!! I bet I've been through 50 blog posts on various sites to try to figure this out. Having successfully installed Viper I didn't want to take the chance and pass that confirm wipe factory question.
I feel like a complete tool. Seriously, thank you for taking the time to respond to me!
Click to expand...
Click to collapse
I'm glad it all worked out! :good:
finding I have to re-flash with flashify each time
using twrp-2.8.7.1, I get only the first reboot from there with hardware keys letting me into twrp after accepting the first factory reset prompt and denying the second. After that cant do it again unless I re-flash. Same thing happens if I flash it from within twrp. Can use terminal, su, boot recovery and I am in., or ADB/fatsboot Primarily worried about a soft brick condition. H-811, v1 20i stock, unlocked bootloader and rooted. DE-bloated,
Any Ideas, Thanks
jdoebean said:
using twrp-2.8.7.1, I get only the first reboot from there with hardware keys letting me into twrp after accepting the first factory reset prompt and denying the second. After that cant do it again unless I re-flash. Same thing happens if I flash it from within twrp. Can use terminal, su, boot recovery and I am in., or ADB/fatsboot Primarily worried about a soft brick condition. H-811, v1 20i stock, unlocked bootloader and rooted. DE-bloated,
Any Ideas, Thanks
Click to expand...
Click to collapse
You drop the twrp file
In fastboot folder open command prompt and flash twrp first just rename it simply to recovery.img while in the fastboot folder
Type fastboot flash recovery recovery.img
Or just fastboot flash recovery.img
Then it should boot you into twrp
Once booting into twrp flash the supersu zip in your internal sd
Once you have root and reboot all you have to do is use flashify app and download twrp from the app and flash it Twrp sticks from there.
Sent from my LGMS631 using XDA Free mobile app
I unlocked my bootloader, installed twrp and several roms to try them out, then decided to go back to stock. Currently have OOS 3.5.4 installed with stock recovery (that came with the toolkit). However, whenever I try to lock the booltloader again, the phone won't boot up. It will bootloop, or just stay off with the led glowing white. I tried to sideload the stock ROM from OnePlus, but it fails after about 45% completion. I tried both 3.5.3 and 3.5.4 and both fail after about 45%. The only way to get the phone to boot again is by unlocking the bootloader again, then it boots just fine. Tried unlocking with the toolkit as well as fastboot oem lock. Both give me the prompt on the phone, then wipe the phone and go into the bootloop.
Any suggestions on how to re-lock the bootloader? I want to be able to get the OTA update, which I think will fail with an unlocked bootloader. Note, I have also tried loading the Nougat update from settings - system update - local upgade (both full and update) and they also fail to load shortly after booting to recovery.
Thanks,
TR
Instead of using the toolkit, try just doing it manually.
fastboot oem lock IS the correct way to lock the bootloader.
If you're running into all those issues, try to reflash the stock rom from the official site. OR try this
NOTE: This WILL wipe everything on your phone so make a backup first!
First Unlock booloader1. On your phone go into Developer screen (Settings --> Developer Options)
If you don't have this go back to Settings --> About Device. Tap "Build number" 7-10 times to unlok developer options
2. In Developer Options turn on "USB Debugging" and "OEM Unlock"
3. Open ADB in command prompt and go to the directory where ADB is.
Type adb reboot bootloader
4. Once your device is in fastboot mode, type in fastboot devices to make sure your device is listed
5. Type in fastboot oem unlock to unlock your device bootloader
You can check to make sure it was properly unlocked by typing in fastboot oem device-info.
6. Reboot into your system
Files we need7. Download the following files:
TWRP - https://build.nethunter.com/test-builds/twrp/oneplus/twrp-3.0.2-0-oneplus3t.img
No-verity-opt-encrypt - https://build.nethunter.com/android-tools/no-verity-opt-encrypt/no-verity-opt-encrypt-5.0.zip
Magisk - http://tiny.cc/latestmagisk
Phh-Superuser - https://forum.xda-developers.com/attachment.php?attachmentid=3988488&d=1483407725
Latest Stable Nougat Rom - http://otafsc.h2os.com/patch/amazon...s3TOxygen_28_OTA_035_all_1612310259_2dc0c.zip
8. Copy all the files to your phone (keep the original on your pc just in case)
9. Load back up to fastboot mode
In ADB type adb reboot bootloader
10. Flash twrp img we downloaded above by typing
fastboot flash recovery twrp-3.0.2-0-oneplus3t.img
11. After this reboot into the system
Install all of our downloaded files through TWRP12. Now boot into recovery by issuing the following ADB command
adb reboot recovery (you should go into TWRP)
13. Once you're in twrp flash the "no-verity-opt-encrypt-5.0.zip" file OR you can format the data partition to f2fs to prevent the dm-verity error.
14. Now install the stock stable nougat rom we downloaded above
15. Do a factory system wipe / cache & dalvik
16. Install magisk through TWRP
17. Wipe cache/dalvik
18. Install phh SuperUser
19. Now reboot into the system normally.
NOTE: This *COULD* take a while since you did a clean install of nougat so just be patient and you should be good to go after this.
Thanks for the reply.
I did do fastboot oem lock, and it results in an unbootable system. fastboot oem unlock makes it bootable again. Not sure why. Also, whenever I do adb sideload <any_rom> it fails after about 45%. Not sure what's happening. Your instructions would get me to Nougat with TWRP and an unlocked bootloader, which may be what I end up doing, but I was trying to get back to fully stock, and locked again, so that OTA's will work properly. If nothing else works, I will go the route you suggest above.
Thanks again!
I just figured I'd try to get you to a working system/phone. After you get all that working you can probably lock your bootloader back to default. Now, I'm not 100% sure, but I believe that if you have a custom recovery you will need to restore that to stock as well before setting the bootloader back to locked.
TXRangerXDA said:
I unlocked my bootloader, installed twrp and several roms to try them out, then decided to go back to stock. Currently have OOS 3.5.4 installed with stock recovery (that came with the toolkit). However, whenever I try to lock the booltloader again, the phone won't boot up. It will bootloop, or just stay off with the led glowing white. I tried to sideload the stock ROM from OnePlus, but it fails after about 45% completion. I tried both 3.5.3 and 3.5.4 and both fail after about 45%. The only way to get the phone to boot again is by unlocking the bootloader again, then it boots just fine. Tried unlocking with the toolkit as well as fastboot oem lock. Both give me the prompt on the phone, then wipe the phone and go into the bootloop.
Any suggestions on how to re-lock the bootloader? I want to be able to get the OTA update, which I think will fail with an unlocked bootloader. Note, I have also tried loading the Nougat update from settings - system update - local upgade (both full and update) and they also fail to load shortly after booting to recovery.
Thanks,
TR
Click to expand...
Click to collapse
I also have the same problem, after the bootloader lock the phone does not start.
I tried with all the possible procedures, also even the rom flash in local and sideload it does not work, It comes to 45% and then fails.
we will highlight the problem, so everyone will know and maybe there is a solution
m0d hipp¥ said:
I just figured I'd try to get you to a working system/phone. After you get all that working you can probably lock your bootloader back to default. Now, I'm not 100% sure, but I believe that if you have a custom recovery you will need to restore that to stock as well before setting the bootloader back to locked.
Click to expand...
Click to collapse
But of course, you can't relock phone with a non standard recovery. Replace TWRP with the ROMs real recovery and relock will work again.
That's what I figured. Thanks for the confirmation.
Use the unbrick tutorial to go back to stock
This is what i did
https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306
pitrus- said:
But of course, you can't relock phone with a non standard recovery. Replace TWRP with the ROMs real recovery and relock will work again.
Click to expand...
Click to collapse
I'm sorry, even with the stock recovery but does not work, it was the first thing I did
You can a unbick tutorial. It worked for my OnePlus 3T. Just search up How to unbrick (whatever OnePlus device you have) on Google. Then follow all the instructions carefully. If you need help with it I could try to do a remote session with you. Edit: It will erase all data and you will boot with oos 3.5.3 ( I also had the same issue as you. But I couldn't install any zip with stock recovery or adb side load.
Haven't seen nothing on the fórum about this particular subject, locking the bootloader seems a problem in this phone
enokack said:
Haven't seen nothing on the fórum about this particular subject, locking the bootloader seems a problem in this phone
Click to expand...
Click to collapse
Only if you have modified the phone in some way or another (like rooting and installing twrp) before trying to re-lock.
If you keep it stock, you should be able to re-lock. Or else, just use the Qualcomm restore method to re-lock.
tried this
OK what i did was when the phone was starting and vibrating I push the power bottom and volume down bottom at the same time ,then i connected the phone to the PC,from the panel in the phone there are 3 categories to erase everything on the phone I did it all(1,2,3) and then I put the phone in ADB mode from the control panel in the phone,After that I flash via fastboot the original .zip from one plus for the version 4.0.3 (1.4 GB) ,when it finished I restarted and the phone started normal again,I hope this help someone alse,I was so desesperated:silly:.
I think the problem in re-locking it is the modified boot image. Locked bootloaders don't support those.
re-locking bootloader will getback the warranty ???
No solutions till now
enokack said:
Haven't seen nothing on the fórum about this particular subject, locking the bootloader seems a problem in this phone
Click to expand...
Click to collapse
Its three easy steps, no need to use any toolkit just follow the instructions. https://forums.oneplus.net/threads/...-3-3t-and-go-back-completely-to-stock.456232/
Abrar123 said:
re-locking bootloader will getback the warranty ???
Click to expand...
Click to collapse
Unlocking the bootloader does not void the warranty on this device:
https://oneplus.net/support/answer/will-rooting-or-unlocking-the-bootloader-void-my-warranty
Once I have root, is there a command to re-lock and later eventually unlock the bootloader again?
I remember this was possible with google nexus devices, there was a shell command (require root) that was able to change bootloader status