Related
(bootloader) Start Verify: 3
(bootloader) Start Verify: 3
(bootloader) erase sector 130560 ~ 131071 (512)
(bootloader) Boot/Recovery signature checking...
(bootloader) setup_tag addr=0x48000100 cmdline add=0x801E9BA0
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:skuid 0x2D002
(bootloader) TAG:hero panel = 0x94002F
(bootloader) TAG:engineerid = 0x0
(bootloader) TAG: PS ID = 0x0
(bootloader) [FAT_ERROR] fat_open_file: can not find RADIOVER.CFG
(bootloader) No RADIOVER.CFG in radio image for SSD version!
(bootloader) [FAT_ERROR] fat_open_file: can not find MDM9KVER.CFG
(bootloader) No MDM9KVER.CFG in mdm9k image for SSD version!
(bootloader) Device CID is not super CID
(bootloader) CID is CWS__001
(bootloader) setting->cid::CWS__001
(bootloader) serial number: [*Your Devices Serial Number Will Appear Here*]
(bootloader) commandline from head: console=ttyHSL3 androidboot.hardware=
(bootloader) holiday no_console_suspend=1
(bootloader) command line length =624
(bootloader) active commandline: poweron_status=1 board_holiday.disable_u
(bootloader) art3=0 diag.enabled=0 board_holiday.debug_uart=0 userdata_se
(bootloader) l=0 androidboot.emmc=true androidboot.pagesize=2048 skuid=0
(bootloader) ddt=20 androidboot.lb=0 androidboot.baseband=N/A androidboot
(bootloader) .cid=CWS__001 androidboot.devicerev=0 androidboot.batt_power
(bootloader) on=good_battery androidboot.carrier=ATT androidboot.mid=PH39
(bootloader) 10000 enable_zcharge=1 androidboot.keycaps=qwerty androidboo
(bootloader) t.qwerty_color=WhiteColor androidboot.dq=FAIL androidboot.mo
(bootloader) de=recovery androidboot.serialno= [*Device Serial*] androidboot.bo
(bootloader) otloader=1.83.0014 zygote_oneshot=off console=ttyHSL3 androi
(bootloader) dboot.hardware=holiday no_console_suspend=1
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) aARM_Partion[6].name=devlog
(bootloader) aARM_Partion[7].name=pdata
(bootloader) aARM_Partion[8].name=radio
(bootloader) aARM_Partion[9].name=adsp
(bootloader) aARM_Partion[A].name=radio_config
(bootloader) aARM_Partion.name=modem_st1
(bootloader) aARM_Partion[C].name=modem_st2
(bootloader) aARM_Partion[D].name=mdm9k
(bootloader) aARM_Partion[E].name=mdm9k_config
(bootloader) aARM_Partion[F].name=mdm_efs1
(bootloader) aARM_Partion[10].name=mdm_efs2
(bootloader) partition number=17
(bootloader) Valid partition num=17
(bootloader) TZ_HTC_SVC_SET_DDR_MPU ret = 0
(bootloader) smem 50004000 (phy 50004000): TZ_HTC_SVC_UPDATE_SMEM ret = 0
(bootloader) TZ_HTC_SVC_ENC ret = 0
(bootloader) [SECURITY] radio_gen_mdm_smem_signature: completed
(bootloader) Start Verify: 3
(bootloader) erase sector 325634 ~ 327678 (2045)
(bootloader) TZ_HTC_SVC_LOG_OPERATOR ret = 0
(bootloader) TZ_HTC_SVC_DISABLE ret = 73490432 (0x4616000)
(bootloader) holiday_gpio_init_For9K_OnAndBack
(bootloader) jump_to_kernel: machine_id(3315), tags_addr(0x48000100), ker
(bootloader) nel_addr(0x48008000)
(bootloader) -------------------hboot boot time:362648 msec
FAILED (status read failed (Too many links))
finished. total time: 6.684s
Now...5th line from the top of that list...
"setup_tag addr=0x48000100 cmdline add=0x801E9BA0"
set cannons and open fire!
(bootloader) erase sector 130560 ~ 131071 (512)
(bootloader) erase sector 325634 ~ 327678 (2045)
what are relevant to these sectors that they need to be erased and why?
There is already a thread devoted to ideas. Please post your ideas there.
Sent from my PG86100 using xda premium
Im trying to bring back an M7 I got from a friend.
He is not tech savvy, and doesnt exactly know how he got to this point, but he tried to follow a guide to install a new ROM and bricked the phone.
This was some time ago, he got an iPhone and gave the M7 to me, and Im trying to bring it back to life.
So the situation is the following:
If I turn on the phone, I get a black screen with a silver htc logo, and for warning symbols, one on each corner.
If I plug and unplug the phone, the screen changes to the bootloader screen, but it only shows RUU at the bottom, cant select anything else.
That screen shows:
*** TAMPERED ***
*** UNLOCKED ***
M7_UL PVT SHIP S-OFF RH
CID-11111111
HBOOT-1.57.0000
RADIO-4T.29.3218.08
OpenDSP-v32.120.274.0909
OS-6.09.401.11 (6.06.401.1)
eMMC-boot 2048MB
Jun 4 2014, 18:08:27.0
RUU
I tried with both Windows and Linux so far, with a USB cable from a N5, and with the original white USB cable from the M7 plugged into USB3 and USB2.
If I run 'fastboot devices', I can see the device connected.
If I run 'fastboot devices getvar all', I get only two lines, and then it just hangs there
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
I tried relocking it, but after 'fastboot oem lock', all I get are '...' and nothing happens.
Also tried flashing a RUU with 'fastboot flash zip ruu.zip', but it just hangs on the first Sending message.
Anyone has seen something like this? Any suggestions?
Model is PN07140
masok said:
Im trying to bring back an M7 I got from a friend.
He is not tech savvy, and doesnt exactly know how he got to this point, but he tried to follow a guide to install a new ROM and bricked the phone.
This was some time ago, he got an iPhone and gave the M7 to me, and Im trying to bring it back to life.
So the situation is the following:
If I turn on the phone, I get a black screen with a silver htc logo, and for warning symbols, one on each corner.
If I plug and unplug the phone, the screen changes to the bootloader screen, but it only shows RUU at the bottom, cant select anything else.
That screen shows:
*** TAMPERED ***
*** UNLOCKED ***
M7_UL PVT SHIP S-OFF RH
CID-11111111
HBOOT-1.57.0000
RADIO-4T.29.3218.08
OpenDSP-v32.120.274.0909
OS-6.09.401.11 (6.06.401.1)
eMMC-boot 2048MB
Jun 4 2014, 18:08:27.0
RUU
I tried with both Windows and Linux so far, with a USB cable from a N5, and with the original white USB cable from the M7 plugged into USB3 and USB2.
If I run 'fastboot devices', I can see the device connected.
If I run 'fastboot devices getvar all', I get only two lines, and then it just hangs there
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
I tried relocking it, but after 'fastboot oem lock', all I get are '...' and nothing happens.
Also tried flashing a RUU with 'fastboot flash zip ruu.zip', but it just hangs on the first Sending message.
Anyone has seen something like this? Any suggestions?
Model is PN07140
Click to expand...
Click to collapse
Hold and press Power + Volume Down button until you can see the "home" & "back" touchscreen buttons blinking, wait for about 10 to 15 seconds while blinking then release Power button while keep pressing the Volume Down button, do not release volume down button wait for the phone to restart it will get you to bootloader mode (fastboot usb /recovery).
Are you sure the phone has a "STOCK RECOVERY"? I think the red text means, the RUU update is trying to change the OS version which is not possible for the RUU to do. It's downgrading the OS. If you have stock recovery. do a factory reset in hboot.
The only solution for you I think is to find a NAND backup or flash a Custom Rom.
If the phone can do fastboot, then install a custom recovery, then install a custom rom zip or a nand backup using ext-sdcard.
masok said:
So the situation is the following:
If I turn on the phone, I get a black screen with a silver htc logo, and for warning symbols, one on each corner.
If I plug and unplug the phone, the screen changes to the bootloader screen, but it only shows RUU at the bottom, cant select anything else.
That screen shows:
*** TAMPERED ***
*** UNLOCKED ***
M7_UL PVT SHIP S-OFF RH
CID-11111111
HBOOT-1.57.0000
OS-6.09.401.11 (6.06.401.1)
eMMC-boot 2048MB
Jun 4 2014, 18:08:27.0
RUU
Model is PN07140
Click to expand...
Click to collapse
you are stuck in RUU mode because the ruu flash didnt complete properly, the two version numbers in red indicate you were going from 6.09.401.11 to 6.06.401.1 (this is caused by the hboot pre-update, and not completing the second flash)
furthermore the 4 red triangles, indicate there was a problem with ruu.zip you were flashing, and now bootloader is waiting for you to complete a successful ruu flash.
so let's first get you out of forced ruu mode, download this: https://www.androidfilehost.com/?fid=23501681358549998
Code:
fastboot reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip fw_6.06.401.1_custom.zip
it may or may not come back with "FAILED (remote: 90 hboot pre-update! please flush image again immediately)", so do the second flash:
Code:
fastboot flash zip fw_6.06.401.1_custom.zip
fastboot reboot-bootloader
it should look something like this:
Code:
C:\ADB5_1.0.32>[B][COLOR="Blue"]fastboot oem rebootRUU[/COLOR][/B]
...
(bootloader) Start Verify: 0
OKAY [ 0.050s]
finished. total time: 0.060s
Code:
C:\ADB5_1.0.32>[B][COLOR="Blue"]fastboot flash zip 7.15.401.1-Combined_TWRP2840_NoWipe.zip[/COLOR][/B]
target reported max download size of 1514139648 bytes
sending 'zip' (40953 KB)...
OKAY [ 3.490s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
[B][COLOR="Red"]FAILED (remote: 90 hboot pre-update! please flush image again immediately)[/COLOR][/B]
finished. total time: 5.100s
second flash, continues the update
Code:
C:\ADB5_1.0.32>[B][COLOR="Blue"]fastboot flash zip 7.15.401.1-Combined_TWRP2840_NoWipe.zip[/COLOR][/B]
< waiting for device >
target reported max download size of 1514139648 bytes
sending 'zip' (40953 KB)...
OKAY [ 3.478s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[sbl1-1] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-1,0
(bootloader) [RUU]UZ,sbl1-1,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-2,0
(bootloader) [RUU]UZ,sbl1-2,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-3,0
(bootloader) [RUU]UZ,sbl1-3,100
(bootloader) signature checking...
(bootloader) [RUU]WP,sbl1-3,0
(bootloader) [RUU]WP,sbl1-3,100
(bootloader) ...... Successful
(bootloader) start image[sbl1-4] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-4,0
(bootloader) [RUU]UZ,sbl1-4,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-5] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-5,0
(bootloader) [RUU]UZ,sbl1-5,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl2,0
(bootloader) [RUU]UZ,sbl2,100
(bootloader) [RUU]WP,sbl2,0
(bootloader) [RUU]WP,sbl2,100
(bootloader) ...... Successful
(bootloader) start image[sbl3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl3,0
(bootloader) [RUU]UZ,sbl3,100
(bootloader) [RUU]WP,sbl3,0
(bootloader) [RUU]WP,sbl3,100
(bootloader) ...... Successful
(bootloader) start image[tp] unzipping & flushing...
(bootloader) [RUU]UZ,tp,0
(bootloader) [RUU]UZ,tp,100
(bootloader) ..... Bypassed
(bootloader) start image[tp] unzipping & flushing...
(bootloader) [RUU]UZ,tp,0
(bootloader) [RUU]UZ,tp,100
(bootloader) ...... Successful
(bootloader) start image[tz] unzipping & flushing...
(bootloader) [RUU]UZ,tz,0
(bootloader) [RUU]UZ,tz,100
(bootloader) [RUU]WP,tz,0
(bootloader) [RUU]WP,tz,100
(bootloader) ...... Successful
(bootloader) start image[adsp] unzipping & flushing...
(bootloader) [RUU]UZ,adsp,0
(bootloader) [RUU]UZ,adsp,15
(bootloader) [RUU]UZ,adsp,27
(bootloader) [RUU]UZ,adsp,37
(bootloader) [RUU]UZ,adsp,49
(bootloader) [RUU]UZ,adsp,60
(bootloader) [RUU]UZ,adsp,72
(bootloader) [RUU]UZ,adsp,82
(bootloader) [RUU]UZ,adsp,94
(bootloader) [RUU]UZ,adsp,100
(bootloader) [RUU]WP,adsp,0
(bootloader) [RUU]WP,adsp,100
(bootloader) ...... Successful
(bootloader) start image[cir] unzipping & flushing...
(bootloader) [RUU]UZ,cir,0
(bootloader) [RUU]UZ,cir,100
(bootloader) ...... Successful
(bootloader) start image[pg2fs_spcustom] unzipping & flushing...
(bootloader) [RUU]UZ,pg2fs_spcustom,0
(bootloader) [RUU]UZ,pg2fs_spcustom,22
(bootloader) [RUU]UZ,pg2fs_spcustom,48
(bootloader) [RUU]UZ,pg2fs_spcustom,70
(bootloader) [RUU]UZ,pg2fs_spcustom,97
(bootloader) [RUU]UZ,pg2fs_spcustom,100
(bootloader) ...... Successful
(bootloader) start image[recovery] unzipping & flushing...
(bootloader) [RUU]UZ,recovery,0
(bootloader) [RUU]UZ,recovery,8
(bootloader) [RUU]UZ,recovery,17
(bootloader) [RUU]UZ,recovery,25
(bootloader) [RUU]UZ,recovery,30
(bootloader) [RUU]UZ,recovery,38
(bootloader) [RUU]UZ,recovery,47
(bootloader) [RUU]UZ,recovery,68
(bootloader) [RUU]UZ,recovery,73
(bootloader) [RUU]UZ,recovery,81
(bootloader) [RUU]UZ,recovery,86
(bootloader) [RUU]UZ,recovery,94
(bootloader) [RUU]UZ,recovery,100
(bootloader) [RUU]WP,recovery,0
(bootloader) [RUU]WP,recovery,100
(bootloader) ...... Successful
(bootloader) start image[rpm] unzipping & flushing...
(bootloader) [RUU]UZ,rpm,0
(bootloader) [RUU]UZ,rpm,100
(bootloader) [RUU]WP,rpm,0
(bootloader) [RUU]WP,rpm,100
(bootloader) ...... Successful
(bootloader) start image[radio] unzipping & flushing...
(bootloader) [RUU]UZ,radio,0
(bootloader) [RUU]UZ,radio,5
(bootloader) [RUU]UZ,radio,11
(bootloader) [RUU]UZ,radio,17
(bootloader) [RUU]UZ,radio,23
(bootloader) [RUU]UZ,radio,29
(bootloader) [RUU]UZ,radio,34
(bootloader) [RUU]UZ,radio,40
(bootloader) [RUU]UZ,radio,46
(bootloader) [RUU]UZ,radio,52
(bootloader) [RUU]UZ,radio,58
(bootloader) [RUU]UZ,radio,63
(bootloader) [RUU]UZ,radio,69
(bootloader) [RUU]UZ,radio,75
(bootloader) [RUU]UZ,radio,81
(bootloader) [RUU]UZ,radio,86
(bootloader) [RUU]UZ,radio,92
(bootloader) [RUU]UZ,radio,99
(bootloader) [RUU]UZ,radio,100
(bootloader) [RUU]WP,radio,0
(bootloader) [RUU]WP,radio,23
(bootloader) [RUU]WP,radio,46
(bootloader) [RUU]WP,radio,69
(bootloader) [RUU]WP,radio,92
(bootloader) [RUU]WP,radio,100
(bootloader) ...... Successful
(bootloader) start image[rcdata] unzipping & flushing...
(bootloader) [RUU]UZ,rcdata,0
(bootloader) [RUU]WP,rcdata,0
Code:
(bootloader) ...... Successful
OKAY [ 58.061s]
finished. total time: 61.539s
^^ note successful
Code:
C:\ADB5_1.0.32>[B][COLOR="Blue"]fastboot reboot-bootloader[/COLOR][/B]
rebooting into bootloader...
OKAY [ 0.040s]
finished. total time: 0.040s
Note, how it bypasses things it doesnt need, but all others should say Successful .... in your case the ruu.zip flash probably failed on some partitions, which will cause the "forced ruu mode", waiting until it's successful.
the above file will downgrade only your firmware to 6.06.401.1, but at least it should get you out of ruu mode
BTW: don't relock bootloader, that's never a good idea in this kind of situation, and for sure do not even THINK about going S-ON !!
eyeyousee said:
Hold and press Power + Volume Down button until you can see the "home" & "back" touchscreen buttons blinking, wait for about 10 to 15 seconds while blinking then release Power button while keep pressing the Volume Down button, do not release volume down button wait for the phone to restart it will get you to bootloader mode (fastboot usb /recovery).
Are you sure the phone has a "STOCK RECOVERY"? I think the red text means, the RUU update is trying to change the OS version which is not possible for the RUU to do. It's downgrading the OS. If you have stock recovery. do a factory reset in hboot.
The only solution for you I think is to find a NAND backup or flash a Custom Rom.
If the phone can do fastboot, then install a custom recovery, then install a custom rom zip or a nand backup using ext-sdcard.
Click to expand...
Click to collapse
Not sure if the phone has stock recovery, but holding power button and volume down doesnt make a difference.
The touchscreen buttons never blink. The phone just reboots and Im again at the silver HTC logo screen.
Regarding flashing a custom ROM or NAND backup, Ill give that a shot, but I dont know how it will work, knowing that fastboot commands just seem to hang there and dont complete. But Ill definitely try that, thanks for the ideas.
nkk71 said:
you are stuck in RUU mode because the ruu flash didnt complete properly, the two version numbers in red indicate you were going from 6.09.401.11 to 6.06.401.1 (this is caused by the hboot pre-update, and not completing the second flash)
furthermore the 4 red triangles, indicate there was a problem with ruu.zip you were flashing, and now bootloader is waiting for you to complete a successful ruu flash.
so let's first get you out of forced ruu mode, download this: https://www.androidfilehost.com/?fid=23501681358549998
Code:
fastboot reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip fw_6.06.401.1_custom.zip
it may or may not come back with "FAILED (remote: 90 hboot pre-update! please flush image again immediately)", so do the second flash:
Note, how it bypasses things it doesnt need, but all others should say Successful .... in your case the ruu.zip flash probably failed on some partitions, which will cause the "forced ruu mode", waiting until it's successful.
the above file will downgrade only your firmware to 6.06.401.1, but at least it should get you out of ruu mode
BTW: don't relock bootloader, that's never a good idea in this kind of situation, and for sure do not even THINK about going S-ON !!
Click to expand...
Click to collapse
Thanks so much for the info, I will try this first thing when I get home, but it looks really promising.
I dont know for sure if the fastboot commands are going to work, since even the fastboot getvar all seems to get stuck, but will sure try this.
Ill let you guys know if I have luck.
Any other ideas will be welcomed.
masok said:
Thanks so much for the info, I will try this first thing when I get home, but it looks really promising.
I dont know for sure if the fastboot commands are going to work, since even the fastboot getvar all seems to get stuck, but will sure try this.
Ill let you guys know if I have luck.
Any other ideas will be welcomed.
Click to expand...
Click to collapse
it'll work... if it doesnt we'll just have to go for a lower version ruu, and if you can please copy/paste your command prompt output (like i did above), so we can see what's going on.
try to avoid unnecessary fastboot commands, when one get's "stuck", it'll just interfere with the rest of the process; usually unplugging and replugging the usb cable fixes the "stuck bootloader" (but obviously don't unplug while it's flashing!!
masok said:
Not sure if the phone has stock recovery, but holding power button and volume down doesnt make a difference.
The touchscreen buttons never blink. The phone just reboots and Im again at the silver HTC logo screen.
Regarding flashing a custom ROM or NAND backup, Ill give that a shot, but I dont know how it will work, knowing that fastboot commands just seem to hang there and dont complete. But Ill definitely try that, thanks for the ideas.
Click to expand...
Click to collapse
masok said:
Thanks so much for the info, I will try this first thing when I get home, but it looks really promising.
I dont know for sure if the fastboot commands are going to work, since even the fastboot getvar all seems to get stuck, but will sure try this.
Ill let you guys know if I have luck.
Any other ideas will be welcomed.
Click to expand...
Click to collapse
nkk71 said:
it'll work... if it doesnt we'll just have to go for a lower version ruu, and if you can please copy/paste your command prompt output (like i did above), so we can see what's going on.
try to avoid unnecessary fastboot commands, when one get's "stuck", it'll just interfere with the rest of the process; usually unplugging and replugging the usb cable fixes the "stuck bootloader" (but obviously don't unplug while it's flashing!!
Click to expand...
Click to collapse
I experienced that situation before (those four corner warning) after a bad RUU. But maybe your phone is more serious than i thought!
So, the best thing is to follow the advice of the more experienced "nkk71" person here. Good Luck!:fingers-crossed:
eyeyousee said:
I experienced that situation before (those four corner warning) after a bad RUU. But maybe your phone is more serious than i thought!
So, the best thing is to follow the advice of the more experienced "nkk71" person here. Good Luck!:fingers-crossed:
Click to expand...
Click to collapse
yeah, the 4 triangles appear after an unsuccessful ruu flash (error 51 partition update fail, i think), then you're stuck in ruu mode.
the two versions numbers appear after the "FAILED (remote: 90 hboot pre-update! please flush image again immediately)" -> the hboot (pre-update) has successfully flashed, so the previous version appears, as well as the version being flashed.... basically hboot from the new flash was successful but the second ruu.zip flash wasnt completed.
if it wasn't completed then only the red OS- line with two versions would show, if however the second flash was executed, but failed (not bypassed, failed) on some partitions, then bootloader will go into constant ruu mode until it's flashed successfully.
nkk71 said:
yeah, the 4 triangles appear after an unsuccessful ruu flash (error 51 partition update fail, i think), then you're stuck in ruu mode.
the two versions numbers appear after the "FAILED (remote: 90 hboot pre-update! please flush image again immediately)" -> the hboot (pre-update) has successfully flashed, so the previous version appears, as well as the version being flashed.... basically hboot from the new flash was successful but the second ruu.zip flash wasnt completed.
if it wasn't completed then only the red OS- line with two versions would show, if however the second flash was executed, but failed (not bypassed, failed) on some partitions, then bootloader will go into constant ruu mode until it's flashed successfully.
Click to expand...
Click to collapse
Well I just tried your suggestions, but no luck.
Fastboot commands are just not working well, they hang.
Fastboot devices works well, I can see the device.
But as mentioned before, basically everything else just hangs, so I got this:
For the commands that I ended up cancelling, I waited more than 5 minutes before doing so.
Also, the flash zip command, now gave an error, but also sometimes it just hangs there not giving any error but not working either
Code:
F:\AndroidFiles\HTC One M7 Bricked>fastboot devices
FA3C5W903875 fastboot
F:\AndroidFiles\HTC One M7 Bricked>fastboot reboot-bootloader
rebooting into bootloader... FAILED (command write failed (Unknown error))
Execution time is 2(s)
F:\AndroidFiles\HTC One M7 Bricked>fastboot oem rebootRUU
... FAILED (command write failed (Unknown error))
Execution time is 2(s)
F:\AndroidFiles\HTC One M7 Bricked>fastboot flash zip fw_6.06.401.1_custom.zip
sending 'zip'... (29596 KB) FAILED (command write failed (Unknown error))
Execution time is 2(s)
F:\AndroidFiles\HTC One M7 Bricked>fastboot devices
FA3C5W903875 fastboot
F:\AndroidFiles\HTC One M7 Bricked>fastboot reboot-bootloader
rebooting into bootloader... ^C
F:\AndroidFiles\HTC One M7 Bricked>fastboot devices
FA3C5W903875 fastboot
F:\AndroidFiles\HTC One M7 Bricked>fastboot oem rebootRUU
... ^C
F:\AndroidFiles\HTC One M7 Bricked>fastboot devices
FA3C5W903875 fastboot
F:\AndroidFiles\HTC One M7 Bricked>fastboot flash zip fw_6.06.401.1_custom.zip
sending 'zip'... (29596 KB) FAILED (command write failed (Unknown error))
Execution time is 2(s)
F:\AndroidFiles\HTC One M7 Bricked>
I'll try with some other drivers to see if it makes a difference.
Other suggestions appreciated.
I tried with other Windows drivers but its still the same.
Fastboot devices still sees the device, but everything else just hangs there and nothing happens.
I also tried it on a Linux machine and a Macbook (both of which dont require drivers if Im not mistaken), and its exactly the same.
The device is seen, but every command hangs there.
I will keep looking but I really dont know why the fastboot commands are behaving this way.
masok said:
Well I just tried your suggestions, but no luck.
Fastboot commands are just not working well, they hang.
Fastboot devices works well, I can see the device.
But as mentioned before, basically everything else just hangs, so I got this:
For the commands that I ended up cancelling, I waited more than 5 minutes before doing so.
Also, the flash zip command, now gave an error, but also sometimes it just hangs there not giving any error but not working either
Code:
F:\AndroidFiles\HTC One M7 Bricked>fastboot devices
FA3C5W903875 fastboot
F:\AndroidFiles\HTC One M7 Bricked>fastboot reboot-bootloader
rebooting into bootloader... FAILED (command write failed (Unknown error))
Execution time is 2(s)
F:\AndroidFiles\HTC One M7 Bricked>fastboot oem rebootRUU
... FAILED (command write failed (Unknown error))
Execution time is 2(s)
F:\AndroidFiles\HTC One M7 Bricked>fastboot flash zip fw_6.06.401.1_custom.zip
sending 'zip'... (29596 KB) FAILED (command write failed (Unknown error))
Execution time is 2(s)
F:\AndroidFiles\HTC One M7 Bricked>fastboot devices
FA3C5W903875 fastboot
F:\AndroidFiles\HTC One M7 Bricked>fastboot reboot-bootloader
rebooting into bootloader... ^C
F:\AndroidFiles\HTC One M7 Bricked>fastboot devices
FA3C5W903875 fastboot
F:\AndroidFiles\HTC One M7 Bricked>fastboot oem rebootRUU
... ^C
F:\AndroidFiles\HTC One M7 Bricked>fastboot devices
FA3C5W903875 fastboot
F:\AndroidFiles\HTC One M7 Bricked>fastboot flash zip fw_6.06.401.1_custom.zip
sending 'zip'... (29596 KB) FAILED (command write failed (Unknown error))
Execution time is 2(s)
F:\AndroidFiles\HTC One M7 Bricked>
I'll try with some other drivers to see if it makes a difference.
Other suggestions appreciated.
Click to expand...
Click to collapse
ouch, that doesnt look nice at all
possibly something is stuck in limbo (maybe due to the failed fastboot oem lock command)
can you try
Code:
fastboot oem ?
(that should give you all the oem commands supported)
and try to boot the rom using
Code:
fastboot oem boot
^^ that **should** boot the phone then we can manually get rid of the ruu mode flag
nkk71 said:
ouch, that doesnt look nice at all
possibly something is stuck in limbo (maybe due to the failed fastboot oem lock command)
can you try
Code:
fastboot oem ?
(that should give you all the oem commands supported)
and try to boot the rom using
Code:
fastboot oem boot
^^ that **should** boot the phone then we can manually get rid of the ruu mode flag
Click to expand...
Click to collapse
Still no luck.
I dont think its because of the fastboot oem lock command, I had already tried to perform other commands before that, like getvar all, and I would get the same hang. Also, bootloader still shows UNLOCKED, so Im guessing that when I ran that oem lock, it didnt work.
Heres the output from the last commands
Code:
F:\AndroidFiles\HTC One M7 Bricked>fastboot oem ?
... (bootloader) command list
(bootloader) dmesg
(bootloader) last_dmesg
(bootloader) clearaspflag
(bootloader) refurbish
(bootloader) copyFotaBoot
(bootloader) get_identifier_token
(bootloader) checkKeycardID
(bootloader) get_tamper_flag
(bootloader) checkSbl1
(bootloader) checkHWSecurity
(bootloader) enter
(bootloader) keytest
(bootloader) heap
(bootloader) boot
(bootloader) reset
(bootloader) powerdown
(bootloader) rebootRUU
(bootloader) heap_test
(bootloader) erase_phone_storage
(bootloader) erase_nfc_record
(bootloader) gotohboot
(bootloader) resetgift
(bootloader) ats
(bootloader) eraseconfig
(bootloader) readconfig
(bootloader) rtask
(bootloader) task
(bootloader) enableqxdm
(bootloader) gencheckpt
(bootloader) readmeid
(bootloader) readpid
(bootloader) writepid
(bootloader) readcid
(bootloader) writecid
(bootloader) readimei
(bootloader) writeimei
(bootloader) readsecureflag
(bootloader) writesecureflag
(bootloader) ddr2gbh
(bootloader) ramdump2gbh
(bootloader) ddr2gstatus
(bootloader) get_temp
(bootloader) writemeid
(bootloader) clear_atsdebug
(bootloader) read_atsdebug
(bootloader) lock
(bootloader) readusername
(bootloader) writeusername
(bootloader) resethtcdebugflag
(bootloader) readredeemrecord
(bootloader) load_emmc
(bootloader) check_emmc_mid
(bootloader) get_wp_info_emmc
(bootloader) send_wp_info_emmc
(bootloader) get_ext_csd_emmc
(bootloader) get_sector_info_emmc
OKAY
Execution time is 72(ms)
F:\AndroidFiles\HTC One M7 Bricked>fastboot oem boot
... FAILED (status read failed (Too many links))
Execution time is 36(s)
F:\AndroidFiles\HTC One M7 Bricked>fastboot devices
F:\AndroidFiles\HTC One M7 Bricked>fastboot devices
FA3C5W903875 fastboot
F:\AndroidFiles\HTC One M7 Bricked>
masok said:
Still no luck.
I dont think its because of the fastboot oem lock command, I had already tried to perform other commands before that, like getvar all, and I would get the same hang. Also, bootloader still shows UNLOCKED, so Im guessing that when I ran that oem lock, it didnt work.
Heres the output from the last commands
Code:
F:\AndroidFiles\HTC One M7 Bricked>fastboot oem ?
... (bootloader) command list
(bootloader) dmesg
(bootloader) last_dmesg
(bootloader) clearaspflag
(bootloader) refurbish
(bootloader) copyFotaBoot
(bootloader) get_identifier_token
(bootloader) checkKeycardID
(bootloader) get_tamper_flag
(bootloader) checkSbl1
(bootloader) checkHWSecurity
(bootloader) enter
(bootloader) keytest
(bootloader) heap
(bootloader) boot
(bootloader) reset
(bootloader) powerdown
(bootloader) rebootRUU
(bootloader) heap_test
(bootloader) erase_phone_storage
(bootloader) erase_nfc_record
(bootloader) gotohboot
(bootloader) resetgift
(bootloader) ats
(bootloader) eraseconfig
(bootloader) readconfig
(bootloader) rtask
(bootloader) task
(bootloader) enableqxdm
(bootloader) gencheckpt
(bootloader) readmeid
(bootloader) readpid
(bootloader) writepid
(bootloader) readcid
(bootloader) writecid
(bootloader) readimei
(bootloader) writeimei
(bootloader) readsecureflag
(bootloader) writesecureflag
(bootloader) ddr2gbh
(bootloader) ramdump2gbh
(bootloader) ddr2gstatus
(bootloader) get_temp
(bootloader) writemeid
(bootloader) clear_atsdebug
(bootloader) read_atsdebug
(bootloader) lock
(bootloader) readusername
(bootloader) writeusername
(bootloader) resethtcdebugflag
(bootloader) readredeemrecord
(bootloader) load_emmc
(bootloader) check_emmc_mid
(bootloader) get_wp_info_emmc
(bootloader) send_wp_info_emmc
(bootloader) get_ext_csd_emmc
(bootloader) get_sector_info_emmc
OKAY
Execution time is 72(ms)
F:\AndroidFiles\HTC One M7 Bricked>fastboot oem boot
... FAILED (status read failed (Too many links))
Execution time is 36(s)
F:\AndroidFiles\HTC One M7 Bricked>fastboot devices
F:\AndroidFiles\HTC One M7 Bricked>fastboot devices
FA3C5W903875 fastboot
F:\AndroidFiles\HTC One M7 Bricked>
Click to expand...
Click to collapse
well something is seriously messing with your bootloader,
- from the screenshot it doesnt look like you corrupted hboot,
- you've already tried different PCs and cables, etc
but you cant seem to use any fastboot commands
does anything work?
some examples:
Code:
fastboot erase cache
fastboot flash recovery <name of recovery>.img
fastboot oem last_dmesg
fastboot oem get_identifier_token
fastboot reboot-bootloader
fastboot reboot
fastboot oem boot
fastboot oem rebootRUU
i'm weirded out
nkk71 said:
well something is seriously messing with your bootloader,
- from the screenshot it doesnt look like you corrupted hboot,
- you've already tried different PCs and cables, etc
but you cant seem to use any fastboot commands
does anything work?
some examples:
Code:
fastboot erase cache
fastboot flash recovery <name of recovery>.img
fastboot oem last_dmesg
fastboot oem get_identifier_token
fastboot reboot-bootloader
fastboot reboot
fastboot oem boot
fastboot oem rebootRUU
i'm weirded out
Click to expand...
Click to collapse
Weird enough, some of those work:
fastboot erase cache:
Code:
F:\AndroidFiles\HTC One M7 Bricked>fastboot erase cache
erasing 'cache'... FAILerasing error!
FAILED (remote: erasing error!)
Execution time is 59(ms)
fastboot oem last_dmesg (ran this in poweshell because the log was too long):
Code:
PS F:\AndroidFiles\HTC One M7 Bricked> .\fastboot.exe oem last_dmesg
... (bootloader) [8] register_debug_console: new entry ptr=0x85100000
(bootloader) [8] -------------------hboot start
(bootloader) [8] chipset_init: DDR: Elpida
(bootloader) [8] chipset_ver is 207150E1
(bootloader) [721] PMIC Restart Reason: Triggered from KPD (power key pre
(bootloader) ss)
(bootloader) [755] pm8921_enable_smpl: smpl=0xD, SMPL_EN_RESET=1
(bootloader) [786] pm8921_enable_smpl: smpl=0x9, SMPL_EN_RESET=0
(bootloader) [813] pm8921_init: poweron_status=0x1
(bootloader) [865] val0 5 val1 40 val2 78 val3 85[896] pm8921_read_time:
(bootloader) secs = 1431185413, h::m:s == 15::30::13, d/m/y = 9/4/115
(bootloader) [923] pm8921_init: Current time = 2015/5/9 15:30:13
(bootloader) [974] val0 5 val1 40 val2 78 val3 85[1002] pm8921_read_time
(bootloader) : secs = 1431185413, h::m:s == 15::30::13, d/m/y = 9/4/115
(bootloader) [1027] hboot read time success 0
(bootloader) [1054] Current time = 2015/5/9 15:30:13
(bootloader) [1096] sdhw_7xxx_open: id=4
(bootloader) [19763] sdcc_init_memory_device done
(bootloader) [29914] HS clock freq = 48MHz
(bootloader) [33687] sdcc_eMMC_target_init()
(bootloader) [33715] Initializing MMC host data structure and clock!
(bootloader) [34746] clock_set_enable : slot=1, mclk=400000
(bootloader) [38793] Command sent: CMD0 MCI_CMD_REG:400 MCI_ARG:0
(bootloader) [39185] Command sent: CMD1 MCI_CMD_REG:441 MCI_ARG:40FF8000
(bootloader) [39951] Command response received: 40FF8080
(bootloader) [40998] Command sent: CMD1 MCI_CMD_REG:441 MCI_ARG:40FF8000
(bootloader) [41760] Command response received: 40FF8080
(bootloader) [42806] Command sent: CMD1 MCI_CMD_REG:441 MCI_ARG:40FF8000
(bootloader) [43570] Command response received: C0FF8080
(bootloader) [43616] Command sent: CMD2 MCI_CMD_REG:4C2 MCI_ARG:0
(bootloader) [44991] Command response received: 38719078
(bootloader) [45014] Decoded CID fields:
(bootloader) [45036] Manufacturer ID: 45
(bootloader) [45058] OEM ID: 0x100
(bootloader) [45080] Product Name: SEM32G
(bootloader) [45102] Product revision: 2.8
(bootloader) [45125] Product serial number: 43613871
(bootloader) [45147] Manufacturing date: 0 2006
(bootloader) [45193] Command sent: CMD3 MCI_CMD_REG:443 MCI_ARG:20000
(bootloader) [45973] Command response received: 00000500
(bootloader) [46019] Command sent: CMD9 MCI_CMD_REG:4C9 MCI_ARG:20000
(bootloader) [47435] Command response received: 8A40407E
(bootloader) [47481] Command sent: CMD7 MCI_CMD_REG:447 MCI_ARG:20000
(bootloader) [48284] Command response received: 00000700
(bootloader) [48340] Command sent: CMD8 MCI_CMD_REG:448 MCI_ARG:0
(bootloader) [49176] Command response received: 00000900
(bootloader) [77731] Decoded CSD fields:
(bootloader) [77753] cmmc_structure: 3
(bootloader) [77775] card_cmd_class: F5
(bootloader) [77797] write_blk_len: 512
(bootloader) [77819] read_blk_len: 512
(bootloader) [77840] r2w_factor: 2
(bootloader) [77862] sector_size: 3914620
(bootloader) [77884] c_size_mult:7
(bootloader) [77905] c_size: 4095
(bootloader) [77927] nsac_clk_cycle: 0
(bootloader) [77949] taac_ns: 10000000
(bootloader) [77971] tran_speed: 0 kbps
(bootloader) [77993] erase_blk_len: 2674820
(bootloader) [78015] read_blk_misalign: 0
(bootloader) [78037] write_blk_misalign: 0
(bootloader) [78060] read_blk_partial: 0
(bootloader) [78082] write_blk_partial: 0
(bootloader) [78104] Card Capacity: llu Bytes
(bootloader) [78128] Read timeout set: 100000000 ns
(bootloader) [78153] Write timeout set: 400000000 ns
(bootloader) [78200] Command sent: CMD6 MCI_CMD_REG:C46 MCI_ARG:3B90100
(bootloader) [79026] Command response received: 00000800
(bootloader) [80073] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [80878] Command response received: 00000900
(bootloader) [81907] clock_set_enable : slot=1, mclk=48000000
(bootloader) [81954] Command sent: CMD6 MCI_CMD_REG:446 MCI_ARG:3AF0100
(bootloader) [81979] Command response received: 00000800
(bootloader) [82025] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [82051] Command response received: 00000900
(bootloader) [82098] Command sent: CMD6 MCI_CMD_REG:446 MCI_ARG:3B70200
(bootloader) [82123] Command response received: 00000800
(bootloader) [82170] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [82195] Command response received: 00000900
(bootloader) [83250] Command sent: CMD8 MCI_CMD_REG:448 MCI_ARG:0
(bootloader) [83276] Command response received: 00000900
(bootloader) [83510] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [83535] Command response received: 00000900
(bootloader) [83558] erase_grpsize: 31
(bootloader) [83580] erase_grpmult: 31
(bootloader) [83601] wp_grpsize: 31
(bootloader) [83623] wp_grpen: 1
(bootloader) [83644] perm_wp: 0
(bootloader) [83665] temp_wp: 0
(bootloader) [83687] part_config: 0
(bootloader) [83709] erase_group_def: 1
(bootloader) [83730] RST_n_Function: 1
(bootloader) [83752] user_wp: 50
(bootloader) [83799] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:0
(bootloader) [83824] Command response received: 00000900
(bootloader) [84098] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:3FFDF
(bootloader) [84124] Command response received: 00000900
(bootloader) [84386] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:40000
(bootloader) [84411] Command response received: 00000900
(bootloader) [84677] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:40201
(bootloader) [84702] Command response received: 00000900
(bootloader) [84949] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:47BB5
(bootloader) [84975] Command response received: 00000900
(bootloader) [85250] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:47DB6
(bootloader) [85276] Command response received: 00000900
(bootloader) [85542] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:485B7
(bootloader) [85568] Command response received: 00000900
(bootloader) [85840] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:487B8
(bootloader) [85865] Command response received: 00000900
(bootloader) [86137] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:497B9
(bootloader) [86163] Command response received: 00000900
(bootloader) [86420] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:4A7FB
(bootloader) [86446] Command response received: 00000900
(bootloader) [86713] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:4CFFC
(bootloader) [86738] Command response received: 00000900
(bootloader) [87022] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:4D7FD
(bootloader) [87047] Command response received: 00000900
(bootloader) [87329] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:4DFFE
(bootloader) [87354] Command response received: 00000900
(bootloader) [87621] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:6C001
(bootloader) [87647] Command response received: 00000900
(bootloader) [87899] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:6FFFF
(bootloader) [87925] Command response received: 00000900
(bootloader) [88189] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:80000
(bootloader) [88214] Command response received: 00000900
(bootloader) [88468] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:807FE
(bootloader) [88494] Command response received: 00000900
(bootloader) [88764] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:827FF
(bootloader) [88789] Command response received: 00000900
(bootloader) [89076] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:84800
(bootloader) [89101] Command response received: 00000900
(bootloader) [89356] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8E801
(bootloader) [89381] Command response received: 00000900
(bootloader) [89644] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8E80A
(bootloader) [89670] Command response received: 00000900
(bootloader) [89935] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8EA0B
(bootloader) [89961] Command response received: 00000900
(bootloader) [90240] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8EA2C
(bootloader) [90266] Command response received: 00000900
(bootloader) [90534] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8F42E
(bootloader) [90560] Command response received: 00000900
(bootloader) [90813] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8F4AF
(bootloader) [90839] Command response received: 00000900
(bootloader) [91085] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8FCB0
(bootloader) [91110] Command response received: 00000900
(bootloader) [91389] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:C0000
(bootloader) [91414] Command response received: 00000900
(bootloader) [91821] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:DA7FE
(bootloader) [91847] Command response received: 00000900
(bootloader) [92126] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:100000
(bootloader) [92151] Command response received: 00000900
(bootloader) [92562] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:12FFFF
(bootloader) [92588] Command response received: 00000900
(bootloader) [92873] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:138000
(bootloader) [92899] Command response received: 00000900
(bootloader) [93151] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:140000
(bootloader) [93176] Command response received: 00000900
(bootloader) [93430] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:4DFFFF
(bootloader) [93456] Command response received: 00000900
(bootloader) [93897] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:61FFFF
(bootloader) [93923] Command response received: 00000900
(bootloader) [94331] check pg1fs
(bootloader) [101058] check pg2fs
(bootloader) [189899] chipset_setting_init
(bootloader) [195413] chipset_setting_init: read pid 203
(bootloader) [203824] SECURE_SMEM_STRUCT 85106000
(bootloader) [208709] read_simlock(1450): 6E7432F0, 4E07AFC7
(bootloader) [209393] radio_init_secure_smem(928): C9F35678, 0
(bootloader) [217606] read_simlock_password(398): EB, 95, 41, 94
(bootloader) [217653] unlock_rec[0] = 0x85109000
(bootloader) [221764] unlock_rec[1] = 0x8510A000
(bootloader) [225857] simlock_passwd 0x85108000
(bootloader) [227399] secure_update_simlock ret = 0
(bootloader) [227793] final simlock 0
(bootloader) [228563] secure_set_simlock ret = 0
(bootloader) [229359] TZ_HTC_SVC_ENC ret = 0
(bootloader) [239449] msm_rpm_init: RPM firmware 3.0.16850530
(bootloader) [239493] MPM_SLEEP_TICK: llums
(bootloader) [239521] [SYSINFO] DDR: Elpida
(bootloader) [239553] [SYSINFO] PVS: Krait:3 Q6:Fast VDDCX:Slow
(bootloader) [239578] [SYSINFO] Vdd_dig: 0.5v
(bootloader) [239606] hw_ver_id is 207150E1
(bootloader) [239632] speed_bin is 1
(bootloader) [239662] 0x207150E1 CPU-1.7G PMIC-v3.0
(bootloader) [239686] [SYSINFO] 0x207150E1 CPU-1.7G PMIC-v3.0
(bootloader) [239708] [SYSINFO] PMIC version
(bootloader) [239737] PMIC revision 1: F4
(bootloader) [239765] PMIC revision 2: 6
(bootloader) [239788] pm8921_check_revision: *revision = 6F4
(bootloader) [239810] [SYSINFO] End PMIC version[239837]
(bootloader) eMMC Manufacturer ID: 45
(bootloader) [239861] [SYSINFO] eMMC: Sandisk 61071359 sectors 29819 MB
(bootloader) [239886] [SYSINFO] eMMC-CID: 45010053 12345678 47284361 3871
(bootloader) 9078
(bootloader) [241488] [FAT_ERROR] fat_open_file: can not find RADIOVER.CF
(bootloader) G
(bootloader) [241526] No RADIOVER.CFG in radio image for WSD version!
(bootloader) [242011] [FAT_ERROR] No M$-DOS partition found
(bootloader) [242035] [FAT_ERROR] fat_open_file: load bpb fail(-22)
(bootloader) [242072] No OPENDSPVER.CFG in adsp image for SSD version!
(bootloader) [242977] [SYSINFO] SBL1: 1.010.30.53
(bootloader) [243574] [SYSINFO] SBL2: 1.010.30.51
(bootloader) [244163] [SYSINFO] SBL3: 1.010.30.49
(bootloader) [244777] [SYSINFO] TZ: 1.430.24.15
(bootloader) [244799] [SYSINFO] RPM: 3.0.98.30
(bootloader) [244849] val0 5 val1 40 val2 78 val3 85[244876] pm8921_read
(bootloader) _time: secs = 1431185413, h::m:s == 15::30::13, d/m/y = 9/4/
(bootloader) 115
(bootloader) [244900] Current time : 2015-5-9 15:30:13 UTC
(bootloader) [266072] pm8921_vreg_disable function, vreg_id = 27
(bootloader) [266098] pm8921_vreg_disable function, vreg_id = 34
(bootloader) [266127] pm8921_vreg_disable function, vreg_id = 35
(bootloader) [266151] pm8921_vreg_disable function, vreg_id = 9
(bootloader) [266176] [ADC] read adc channel VBAT(1):
(bootloader) [266199] pm8921_adc_calib_device start
(bootloader) [283325] pm8921_adc_calib_device end
(bootloader) [293410] [ADC] adc_code = 0x95BC, physical=3944 mV
(bootloader) [293436] [BATT] setting_check_perflock_allowance: vol_curr=3
(bootloader) 944 mV vol_limit=3550 mV
(bootloader) [293597] [THERMAL]tsens_init: Tsens init done
(bootloader) [294625] msm_thermal: CPU0 temperature is 30 C
(bootloader) [294651] [INFO][ACPU] get_pvs: ACPU PVS: Fast
(bootloader) [294677] [INFO][ACPU] acpuclk_8064_init: Max ACPU freq: 1512
(bootloader) 000 KHz
(bootloader) [294732] [DEBUG][ACPU] hfpll_init: Initializing HFPLL4
(bootloader) [294762] [WARNING][ACPU] hfpll_enable: This regulator hfpll_
(bootloader) l2 (40) is LVS type, APPS cannot control it.
(bootloader) [294869] [DEBUG][ACPU] hfpll_init: Initializing HFPLL0
(bootloader) [294927] [WARNING][ACPU] hfpll_enable: This regulator hfpll0
(bootloader) (40) is LVS type, APPS cannot control it.
(bootloader) [295056] [INFO][ACPU] acpuclk_set_rate: Set cpu0 rate to 918
(bootloader) 000
(bootloader) [295072] [DEBUG][ACPU] acpuclk_8064_set_rate: Switching from
(bootloader) ACPU0 rate 1512000 KHz -> 918000 KHz
(bootloader) [295324] [DEBUG][ACPU] acpuclk_8064_set_rate: ACPU0 speed ch
(bootloader) ange complete
(bootloader) [295348] [INFO][ACPU] acpuclk_set_rate: Set cpu0 rate to 151
(bootloader) 2000
(bootloader) [295389] [DEBUG][ACPU] acpuclk_8064_set_rate: Switching from
(bootloader) ACPU0 rate 918000 KHz -> 1512000 KHz
(bootloader) [295630] [DEBUG][ACPU] acpuclk_8064_set_rate: ACPU0 speed ch
(bootloader) ange complete
(bootloader) [295645] Enable hboot boot time perflock
(bootloader) [649006] --pm_check_power_on_status--[654019] Device CID is
(bootloader) not powerkey debounce CID
(bootloader) [661237]
(bootloader) m7_powerkey_debounce_checking: PowerKey debounce checking OK
(bootloader) . Continue bootup...
(bootloader) [665018] pm8921_vreg_disable function, vreg_id = 19
(bootloader) [668798] pm8921_vreg_disable function, vreg_id = 24
(bootloader) [671720] m7_vreg_init: enable lvs2 for XB
(bootloader) [684498] pm8921_vreg_disable function, vreg_id = 16
(bootloader) [690256] start block/size of [dzsystem] is different to [sys
(bootloader) tem]. Sync it.
(bootloader) [694466] dzsystem: start block = 1310721; size = 3801086
(bootloader) [695497] Update EBR
(bootloader) [714217] pm8921_vreg_disable function, vreg_id = 15
(bootloader) [717999] pm8921_vreg_disable function, vreg_id = 17
(bootloader) [721779] pm8921_vreg_disable function, vreg_id = 14
(bootloader) [734734] pm8921_vreg_disable function, vreg_id = 13
(bootloader) [956504] PMIC pm8921_fix_charger_lockup
(bootloader) [959340] [ADC] read adc channel VBAT(1):
(bootloader) [972428] [ADC] adc_code = 0x9590, physical=3931 mV
(bootloader) [976381] [BATT] batt_vol=3931 mV current=466 mA FSM=3
(bootloader) [980075] PMIC PMIC charger init by user parameters
(bootloader) [981879] PMIC revision 1: F4
(bootloader) [983598] PMIC revision 2: 6
(bootloader) [988668] PMIC Restart Reason: Triggered from KPD (power key
(bootloader) press)
(bootloader) [991418] PMIC [Batt]pm_chg_failed_clear
(bootloader) [996917] PMIC [Batt] pm8921_chg_hw_init: FSM=3 after clear c
(bootloader) hg fail bit
(bootloader) [999409] PMIC PMIC charger init done
(bootloader) [1001643] [BATT]3 cells initiated.
(bootloader) [1005939] [PMIC-BMS]r_sense=10 temp_channel=8 id_channel=9
(bootloader) [1009032] [ADC] read adc channel BATT_ID(9):
(bootloader) [1022034] [ADC] adc_code = 0x6620, physical=129 mV
(bootloader) [1024698] [BATT]: cur_cell is initiated
(bootloader) [1028650] [PMIC-BMS] set bms_battery_data (cell_id=2).
(bootloader) [1051212] [PMIC-BMS]BMS init OK -- ocv = 3924000
(bootloader) [1057227] [PMIC-BMS]pm8921_bms_read_ocv_updated_flag: OCV_UP
(bootloader) DATE_STORAGE = 0x0
(bootloader) [1062469] [PMIC-BMS]pm8921_bms_get_ocv_flag: OCV_UPDATE_STOR
(bootloader) AGE = 0x0
(bootloader) [1071577] radio_is_boot_from_shutdown(): 1, reset_reason=0xF
(bootloader) FDFDFFF, hw_reason=0x00000000, ocv_hw_reset=0x00000000
(bootloader) [1076818] [PMIC-BMS]pm8921_bms_set_ocv_flag: OCV_UPDATE_STOR
(bootloader) AGE = 0x0
(bootloader) [1080169] [ADC] read adc channel BATT_THERM(8):
(bootloader) [1093087] [ADC] adc_code = 0x87CB, physical=23 mV
(bootloader) [1095922] [ADC] read adc channel VBAT(1):
(bootloader) [1109009] [ADC] adc_code = 0x958C, physical=3930 mV
(bootloader) [1112102] [ADC] read adc channel BATT_ID(9):
(bootloader) [1125105] [ADC] adc_code = 0x6620, physical=129 mV
(bootloader) [1128456] [ADC] read adc channel BATT_THERM(8):
(bootloader) [1141371] [ADC] adc_code = 0x87CB, physical=23 mV
(bootloader) [1154309] [PMIC-BMS]P=65, adc_based_ocv=3963896, T=23
(bootloader) [1160582] [BATT] V=3930 mV, T=23 C, OCV=3924 mV, ID=129 mV,
(bootloader) I=256 mA, P=65, FSM=3
(bootloader) [1168487] radio_boot_mode() poweron_status=0x00000001, reset
(bootloader) _reason=0xFFDFDFFF, hw_reason=0x00000000
(bootloader) [1469384] E0902910 E0902E20
(bootloader) [1560535] usb_init_hw: pull up d+
(bootloader) [1591256] m7_set_charging(1)
(bootloader) [1592802] m7_hw_reset_nfc
(bootloader) [1822729] m7_init_display
(bootloader) [1826351] m7_init_display ID LCD_ID0=20 LCD_ID1=43
(bootloader) [1829196] m7_init_display ID id0=0 id1=1
(bootloader) [1835940] m7_init_display_panelid_940067
(bootloader) [1838431] SHARP_RENESAS FULL HD panel
(bootloader) [1855866] mdp_clock_init
(bootloader) [1869607] Video Mode
(bootloader) [1893119] mipi_read_back:0 0x21000012
(bootloader) [1916631] mipi_read_back:0 0x21000012
(bootloader) [1940141] mipi_read_back:0 0x21C5002D
(bootloader) [1944524] id1= 0x5D120000, id2= 0x5D120000, id3= 0x5D2D00C5
(bootloader) [1955520] M7 sharp renesas cmd panel ID=0x940069
(bootloader) [1957411] mipi_dsi_cmds_tx_ext
(bootloader) [2095810] [CIR] m7_init_cir, enter.
(bootloader) [2097958] [CIR] m7_init_cir, end.
(bootloader) [2101911] chipset_bootmode(): reset_reason=0xFFDFDFFF
(bootloader) [2103371] Board_PID : 203
(bootloader) [2107954] [FAT_ERROR] fat_open_file: can not find MDATA.CFG
(bootloader) [2109243] No MDATA.CFG
(bootloader) [2111015] Gyro ID = 0xA5
(bootloader) [2112787] Gyro ID = 0xD4
(bootloader) [2114591] Setting gy_type = 2
(bootloader) [2118654] reset rt5501 ret 0
(bootloader) [2122435] m7_init is finished: 18:08:20, Jun 4 2014
(bootloader) [2139166] TZ_HTC_SVC_ENC ret = 0
(bootloader) [2141228] TZ_HTC_SVC_ENC ret = 0
(bootloader) [2143376] valid keybox is existed
(bootloader) [2160596] TZ_HTC_SVC_ENC ret = 0
(bootloader) [2178499] TZ_HTC_SVC_ENC ret = 0
(bootloader) [2190692] radio_update_drm_config: read pg2fs_dapkey len (0)
(bootloader) failed
(bootloader) [2203117] [INFO][ACPU] acpuclk_set_rate: Set cpu0 rate to 91
(bootloader) 8000
(bootloader) [2210851] [DEBUG][ACPU] acpuclk_8064_set_rate: Switching fro
(bootloader) m ACPU0 rate 1512000 KHz -> 918000 KHz
(bootloader) [2216523] [DEBUG][ACPU] acpuclk_8064_set_rate: ACPU0 speed c
(bootloader) hange complete
(bootloader) [2219444] Disable hboot boot time perflock
(bootloader) [2221162] ARM11 Boot Mode: 9
(bootloader) [2223052] Platform: HBOOT-8064
(bootloader) [2371439] m7_init_backlight: panel_id=0x940069
(bootloader) [2374085] PWM ic version A2
(bootloader) [2482463] mipi_dsi_cmds_tx_ext
(bootloader) [2491733] m7_battery_stored_data_clean: magic_num=DDAACC11,
(bootloader) stored_soc=0, stored_ocv=0, stored_cc=0, currtime=ld
(bootloader) [2508712] Start Verify: 0
(bootloader) [3555752] SD: write failed in CMD25.
(bootloader) [3556869] usb_Vbus 0
(bootloader) [3657510] E0902910 E0902E20
(bootloader) [3748756] usb_init_hw: pull low d+
(bootloader) [3780172] usb_check_vbus: pull up d+
(bootloader) [3782062]
(bootloader) ###[ RUU Mode ]###
(bootloader) [3786015] chipset_bootmode(): reset_reason=0xFFDFDFFF
(bootloader) [3787648]
(bootloader) USB_STS_SUSPEND
(bootloader) [3789366] m7_set_charging(1)
(bootloader) [3792202] [ADC] read adc channel VBAT(1):
(bootloader) [3805300] [ADC] adc_code = 0x96AE, physical=4015 mV
(bootloader) [3946790]
(bootloader) USB_STS_RESET
(bootloader) [3948876] USB_SPEED_HIGH
(bootloader) [4034391] usb_setup:DEVICE_WRITE:SET_CONFIGURATION:1
(bootloader) [4035852] Set usb_ats = 0
(bootloader) [23958661] fastboot_command:[erase:cache]
(bootloader) [23992127]
(bootloader) eMMC Manufacturer ID: 45
(bootloader) [24002438] [ERR] Cmd35 polling status timed out, MCI_STATUS:
(bootloader) 0x4C0000
(bootloader) [24006906] [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [24009054] sdcc_erase, CMD35 fail
(bootloader) [24012749] emmc_erase(2704): sd_erase_sector failed!
(bootloader) [33783779] fastboot_command:[oem get_identifier_token]
(bootloader) [33786615] fb_cmd_oem:get_identifier_token
(bootloader) [33790911] register_debug_console: new entry ptr=0x85100140
(bootloader) [33793236]
(bootloader) [33795550] < Please cut following message >
(bootloader) [33798472] <<<< Identifier Token Start >>>>
(bootloader) [33801393] 823A218BF997F79A495BE9AB97F568A1
(bootloader) [33804315] 804A6CC58119AF2F1005C0C4379238B2
(bootloader) [33807236] XXXXXXXXXXXXXXXXXXXXXXXXXX
(bootloader) [33810158] 71DBE5538028F877F3919DD65AB1D3FA
(bootloader) [33813079] 8AE3595DD09FBC403851FE6060F7892A
(bootloader) [33816001] 3D60762CFD8EB920FDC021032EFB14E7
(bootloader) [33818922] B17286C55CA1D21B84B09CB5A3FC5A93
(bootloader) [33821844]XXXXXXXXXXXXXXXXXXXXXXXXXXXX
(bootloader) [33824765] 7E1BE0819355D304A81508BAE142B86F
(bootloader) [33827687] 97FB45471228032A2415BF15E32B54FD
(bootloader) [33830608] XXXXXXXXXXXXXXXXXXXXXXXXXXX
(bootloader) [33833530] D636283263114DE4AF91094204480B8A
(bootloader) [33836451] XXXXXXXXXXXXXXXXXXXXXXXXXXX
(bootloader) [33839373] 842491A414D885DE5BF2725A41FB6D19
(bootloader) [33842294] XXXXXXXXXXXXXXXXXXXXXXXXXX
(bootloader) [33845216] DFF76F5385176E8BE008D307E7476E8A
(bootloader) [33848137] <<<<< Identifier Token End >>>>>
(bootloader) [41704594] fastboot_command:[oem last_dmesg]
(bootloader) [41706570] fb_cmd_oem:last_dmesg
(bootloader) [41710866] register_debug_console: new entry ptr=0x85100140
(bootloader) [51470204] fastboot_command:[reboot-bootloader]
(bootloader) [8] check_ramlog_region: Backup last hboot ramlog.
OKAY
Execution time is 125(ms)
fastboot oem get_identifier_token (edited the XXX myself, not an error):
Code:
F:\AndroidFiles\HTC One M7 Bricked>fastboot oem get_identifier_token
... (bootloader)
(bootloader) < Please cut following message >
(bootloader) <<<< Identifier Token Start >>>>
(bootloader) B3B4555E729CDFDF99D4CDF01B9339AA
(bootloader) 42A8DDD9871B2B67831C7C743A460E48
(bootloader) XXXXXXXXXXXXXXXXXXXXXXXXXXX
(bootloader) 2E34613969BE70BA890B0953F3038F4F
(bootloader) 300604A85EE40B1F2167E9F0B67783CE
(bootloader) XXXXXXXXXXXXXXXXXXXXXXXXXXX
(bootloader) ABAD7CBDCBEBD3B75F9EBE51B44F2380
(bootloader) 6E521A664B3294914D49CD4E00C33F88
(bootloader) F31B7A5C75EB44C6CF73B3D97A2C9A40
(bootloader) 77FB7587D2993AA7A5DE5F8BD45B2169
(bootloader) 3869966FD04391583EA886F02C34764D
(bootloader) XXXXXXXXXXXXXXXXXXXXXXXXXX
(bootloader) 2B55E27212C53121F9BF0F8ACC4C4FC1
(bootloader) AFDB68D9674E993AAF425720FC5FE080
(bootloader) 54177D5B9C6577971899A0EE2C556927
(bootloader) 897054342DBA6F9B68EA0E7E48FE54CE
(bootloader) <<<<< Identifier Token End >>>>>
OKAY
Execution time is 1(s)
Didnt try this one right now, but all flash commands before got stuck on the Sending XXX.img/zip
fastboot flash recovery <name of recovery>.img
This ones just show the "..." and hang there:
fastboot reboot-bootloader
fastboot reboot
fastboot oem boot
fastboot oem rebootRUU
Also tried downloading a RUU.exe file, ran it, but after accepting license and clicking next, it hangs a little bit on Verifying Android phone information, and then it just fails with error 170
ERROR [170]: USB CONNECTION ERROR
masok said:
Weird enough, some of those work:
fastboot erase cache:
Code:
F:\AndroidFiles\HTC One M7 Bricked>fastboot erase cache
erasing 'cache'... FAILerasing error!
FAILED (remote: erasing error!)
Execution time is 59(ms)
fastboot oem last_dmesg (ran this in poweshell because the log was too long):
Code:
PS F:\AndroidFiles\HTC One M7 Bricked> .\fastboot.exe oem last_dmesg
... (bootloader) [8] register_debug_console: new entry ptr=0x85100000
(bootloader) [8] -------------------hboot start
(bootloader) [8] chipset_init: DDR: Elpida
(bootloader) [8] chipset_ver is 207150E1
(bootloader) [721] PMIC Restart Reason: Triggered from KPD (power key pre
(bootloader) ss)
(bootloader) [755] pm8921_enable_smpl: smpl=0xD, SMPL_EN_RESET=1
(bootloader) [786] pm8921_enable_smpl: smpl=0x9, SMPL_EN_RESET=0
(bootloader) [813] pm8921_init: poweron_status=0x1
(bootloader) [865] val0 5 val1 40 val2 78 val3 85[896] pm8921_read_time:
(bootloader) secs = 1431185413, h::m:s == 15::30::13, d/m/y = 9/4/115
(bootloader) [923] pm8921_init: Current time = 2015/5/9 15:30:13
(bootloader) [974] val0 5 val1 40 val2 78 val3 85[1002] pm8921_read_time
(bootloader) : secs = 1431185413, h::m:s == 15::30::13, d/m/y = 9/4/115
(bootloader) [1027] hboot read time success 0
(bootloader) [1054] Current time = 2015/5/9 15:30:13
(bootloader) [1096] sdhw_7xxx_open: id=4
(bootloader) [19763] sdcc_init_memory_device done
(bootloader) [29914] HS clock freq = 48MHz
(bootloader) [33687] sdcc_eMMC_target_init()
(bootloader) [33715] Initializing MMC host data structure and clock!
(bootloader) [34746] clock_set_enable : slot=1, mclk=400000
(bootloader) [38793] Command sent: CMD0 MCI_CMD_REG:400 MCI_ARG:0
(bootloader) [39185] Command sent: CMD1 MCI_CMD_REG:441 MCI_ARG:40FF8000
(bootloader) [39951] Command response received: 40FF8080
(bootloader) [40998] Command sent: CMD1 MCI_CMD_REG:441 MCI_ARG:40FF8000
(bootloader) [41760] Command response received: 40FF8080
(bootloader) [42806] Command sent: CMD1 MCI_CMD_REG:441 MCI_ARG:40FF8000
(bootloader) [43570] Command response received: C0FF8080
(bootloader) [43616] Command sent: CMD2 MCI_CMD_REG:4C2 MCI_ARG:0
(bootloader) [44991] Command response received: 38719078
(bootloader) [45014] Decoded CID fields:
(bootloader) [45036] Manufacturer ID: 45
(bootloader) [45058] OEM ID: 0x100
(bootloader) [45080] Product Name: SEM32G
(bootloader) [45102] Product revision: 2.8
(bootloader) [45125] Product serial number: 43613871
(bootloader) [45147] Manufacturing date: 0 2006
(bootloader) [45193] Command sent: CMD3 MCI_CMD_REG:443 MCI_ARG:20000
(bootloader) [45973] Command response received: 00000500
(bootloader) [46019] Command sent: CMD9 MCI_CMD_REG:4C9 MCI_ARG:20000
(bootloader) [47435] Command response received: 8A40407E
(bootloader) [47481] Command sent: CMD7 MCI_CMD_REG:447 MCI_ARG:20000
(bootloader) [48284] Command response received: 00000700
(bootloader) [48340] Command sent: CMD8 MCI_CMD_REG:448 MCI_ARG:0
(bootloader) [49176] Command response received: 00000900
(bootloader) [77731] Decoded CSD fields:
(bootloader) [77753] cmmc_structure: 3
(bootloader) [77775] card_cmd_class: F5
(bootloader) [77797] write_blk_len: 512
(bootloader) [77819] read_blk_len: 512
(bootloader) [77840] r2w_factor: 2
(bootloader) [77862] sector_size: 3914620
(bootloader) [77884] c_size_mult:7
(bootloader) [77905] c_size: 4095
(bootloader) [77927] nsac_clk_cycle: 0
(bootloader) [77949] taac_ns: 10000000
(bootloader) [77971] tran_speed: 0 kbps
(bootloader) [77993] erase_blk_len: 2674820
(bootloader) [78015] read_blk_misalign: 0
(bootloader) [78037] write_blk_misalign: 0
(bootloader) [78060] read_blk_partial: 0
(bootloader) [78082] write_blk_partial: 0
(bootloader) [78104] Card Capacity: llu Bytes
(bootloader) [78128] Read timeout set: 100000000 ns
(bootloader) [78153] Write timeout set: 400000000 ns
(bootloader) [78200] Command sent: CMD6 MCI_CMD_REG:C46 MCI_ARG:3B90100
(bootloader) [79026] Command response received: 00000800
(bootloader) [80073] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [80878] Command response received: 00000900
(bootloader) [81907] clock_set_enable : slot=1, mclk=48000000
(bootloader) [81954] Command sent: CMD6 MCI_CMD_REG:446 MCI_ARG:3AF0100
(bootloader) [81979] Command response received: 00000800
(bootloader) [82025] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [82051] Command response received: 00000900
(bootloader) [82098] Command sent: CMD6 MCI_CMD_REG:446 MCI_ARG:3B70200
(bootloader) [82123] Command response received: 00000800
(bootloader) [82170] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [82195] Command response received: 00000900
(bootloader) [83250] Command sent: CMD8 MCI_CMD_REG:448 MCI_ARG:0
(bootloader) [83276] Command response received: 00000900
(bootloader) [83510] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [83535] Command response received: 00000900
(bootloader) [83558] erase_grpsize: 31
(bootloader) [83580] erase_grpmult: 31
(bootloader) [83601] wp_grpsize: 31
(bootloader) [83623] wp_grpen: 1
(bootloader) [83644] perm_wp: 0
(bootloader) [83665] temp_wp: 0
(bootloader) [83687] part_config: 0
(bootloader) [83709] erase_group_def: 1
(bootloader) [83730] RST_n_Function: 1
(bootloader) [83752] user_wp: 50
(bootloader) [83799] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:0
(bootloader) [83824] Command response received: 00000900
(bootloader) [84098] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:3FFDF
(bootloader) [84124] Command response received: 00000900
(bootloader) [84386] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:40000
(bootloader) [84411] Command response received: 00000900
(bootloader) [84677] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:40201
(bootloader) [84702] Command response received: 00000900
(bootloader) [84949] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:47BB5
(bootloader) [84975] Command response received: 00000900
(bootloader) [85250] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:47DB6
(bootloader) [85276] Command response received: 00000900
(bootloader) [85542] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:485B7
(bootloader) [85568] Command response received: 00000900
(bootloader) [85840] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:487B8
(bootloader) [85865] Command response received: 00000900
(bootloader) [86137] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:497B9
(bootloader) [86163] Command response received: 00000900
(bootloader) [86420] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:4A7FB
(bootloader) [86446] Command response received: 00000900
(bootloader) [86713] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:4CFFC
(bootloader) [86738] Command response received: 00000900
(bootloader) [87022] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:4D7FD
(bootloader) [87047] Command response received: 00000900
(bootloader) [87329] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:4DFFE
(bootloader) [87354] Command response received: 00000900
(bootloader) [87621] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:6C001
(bootloader) [87647] Command response received: 00000900
(bootloader) [87899] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:6FFFF
(bootloader) [87925] Command response received: 00000900
(bootloader) [88189] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:80000
(bootloader) [88214] Command response received: 00000900
(bootloader) [88468] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:807FE
(bootloader) [88494] Command response received: 00000900
(bootloader) [88764] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:827FF
(bootloader) [88789] Command response received: 00000900
(bootloader) [89076] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:84800
(bootloader) [89101] Command response received: 00000900
(bootloader) [89356] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8E801
(bootloader) [89381] Command response received: 00000900
(bootloader) [89644] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8E80A
(bootloader) [89670] Command response received: 00000900
(bootloader) [89935] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8EA0B
(bootloader) [89961] Command response received: 00000900
(bootloader) [90240] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8EA2C
(bootloader) [90266] Command response received: 00000900
(bootloader) [90534] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8F42E
(bootloader) [90560] Command response received: 00000900
(bootloader) [90813] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8F4AF
(bootloader) [90839] Command response received: 00000900
(bootloader) [91085] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8FCB0
(bootloader) [91110] Command response received: 00000900
(bootloader) [91389] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:C0000
(bootloader) [91414] Command response received: 00000900
(bootloader) [91821] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:DA7FE
(bootloader) [91847] Command response received: 00000900
(bootloader) [92126] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:100000
(bootloader) [92151] Command response received: 00000900
(bootloader) [92562] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:12FFFF
(bootloader) [92588] Command response received: 00000900
(bootloader) [92873] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:138000
(bootloader) [92899] Command response received: 00000900
(bootloader) [93151] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:140000
(bootloader) [93176] Command response received: 00000900
(bootloader) [93430] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:4DFFFF
(bootloader) [93456] Command response received: 00000900
(bootloader) [93897] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:61FFFF
(bootloader) [93923] Command response received: 00000900
(bootloader) [94331] check pg1fs
(bootloader) [101058] check pg2fs
(bootloader) [189899] chipset_setting_init
(bootloader) [195413] chipset_setting_init: read pid 203
(bootloader) [203824] SECURE_SMEM_STRUCT 85106000
(bootloader) [208709] read_simlock(1450): 6E7432F0, 4E07AFC7
(bootloader) [209393] radio_init_secure_smem(928): C9F35678, 0
(bootloader) [217606] read_simlock_password(398): EB, 95, 41, 94
(bootloader) [217653] unlock_rec[0] = 0x85109000
(bootloader) [221764] unlock_rec[1] = 0x8510A000
(bootloader) [225857] simlock_passwd 0x85108000
(bootloader) [227399] secure_update_simlock ret = 0
(bootloader) [227793] final simlock 0
(bootloader) [228563] secure_set_simlock ret = 0
(bootloader) [229359] TZ_HTC_SVC_ENC ret = 0
(bootloader) [239449] msm_rpm_init: RPM firmware 3.0.16850530
(bootloader) [239493] MPM_SLEEP_TICK: llums
(bootloader) [239521] [SYSINFO] DDR: Elpida
(bootloader) [239553] [SYSINFO] PVS: Krait:3 Q6:Fast VDDCX:Slow
(bootloader) [239578] [SYSINFO] Vdd_dig: 0.5v
(bootloader) [239606] hw_ver_id is 207150E1
(bootloader) [239632] speed_bin is 1
(bootloader) [239662] 0x207150E1 CPU-1.7G PMIC-v3.0
(bootloader) [239686] [SYSINFO] 0x207150E1 CPU-1.7G PMIC-v3.0
(bootloader) [239708] [SYSINFO] PMIC version
(bootloader) [239737] PMIC revision 1: F4
(bootloader) [239765] PMIC revision 2: 6
(bootloader) [239788] pm8921_check_revision: *revision = 6F4
(bootloader) [239810] [SYSINFO] End PMIC version[239837]
(bootloader) eMMC Manufacturer ID: 45
(bootloader) [239861] [SYSINFO] eMMC: Sandisk 61071359 sectors 29819 MB
(bootloader) [239886] [SYSINFO] eMMC-CID: 45010053 12345678 47284361 3871
(bootloader) 9078
(bootloader) [241488] [FAT_ERROR] fat_open_file: can not find RADIOVER.CF
(bootloader) G
(bootloader) [241526] No RADIOVER.CFG in radio image for WSD version!
(bootloader) [242011] [FAT_ERROR] No M$-DOS partition found
(bootloader) [242035] [FAT_ERROR] fat_open_file: load bpb fail(-22)
(bootloader) [242072] No OPENDSPVER.CFG in adsp image for SSD version!
(bootloader) [242977] [SYSINFO] SBL1: 1.010.30.53
(bootloader) [243574] [SYSINFO] SBL2: 1.010.30.51
(bootloader) [244163] [SYSINFO] SBL3: 1.010.30.49
(bootloader) [244777] [SYSINFO] TZ: 1.430.24.15
(bootloader) [244799] [SYSINFO] RPM: 3.0.98.30
(bootloader) [244849] val0 5 val1 40 val2 78 val3 85[244876] pm8921_read
(bootloader) _time: secs = 1431185413, h::m:s == 15::30::13, d/m/y = 9/4/
(bootloader) 115
(bootloader) [244900] Current time : 2015-5-9 15:30:13 UTC
(bootloader) [266072] pm8921_vreg_disable function, vreg_id = 27
(bootloader) [266098] pm8921_vreg_disable function, vreg_id = 34
(bootloader) [266127] pm8921_vreg_disable function, vreg_id = 35
(bootloader) [266151] pm8921_vreg_disable function, vreg_id = 9
(bootloader) [266176] [ADC] read adc channel VBAT(1):
(bootloader) [266199] pm8921_adc_calib_device start
(bootloader) [283325] pm8921_adc_calib_device end
(bootloader) [293410] [ADC] adc_code = 0x95BC, physical=3944 mV
(bootloader) [293436] [BATT] setting_check_perflock_allowance: vol_curr=3
(bootloader) 944 mV vol_limit=3550 mV
(bootloader) [293597] [THERMAL]tsens_init: Tsens init done
(bootloader) [294625] msm_thermal: CPU0 temperature is 30 C
(bootloader) [294651] [INFO][ACPU] get_pvs: ACPU PVS: Fast
(bootloader) [294677] [INFO][ACPU] acpuclk_8064_init: Max ACPU freq: 1512
(bootloader) 000 KHz
(bootloader) [294732] [DEBUG][ACPU] hfpll_init: Initializing HFPLL4
(bootloader) [294762] [WARNING][ACPU] hfpll_enable: This regulator hfpll_
(bootloader) l2 (40) is LVS type, APPS cannot control it.
(bootloader) [294869] [DEBUG][ACPU] hfpll_init: Initializing HFPLL0
(bootloader) [294927] [WARNING][ACPU] hfpll_enable: This regulator hfpll0
(bootloader) (40) is LVS type, APPS cannot control it.
(bootloader) [295056] [INFO][ACPU] acpuclk_set_rate: Set cpu0 rate to 918
(bootloader) 000
(bootloader) [295072] [DEBUG][ACPU] acpuclk_8064_set_rate: Switching from
(bootloader) ACPU0 rate 1512000 KHz -> 918000 KHz
(bootloader) [295324] [DEBUG][ACPU] acpuclk_8064_set_rate: ACPU0 speed ch
(bootloader) ange complete
(bootloader) [295348] [INFO][ACPU] acpuclk_set_rate: Set cpu0 rate to 151
(bootloader) 2000
(bootloader) [295389] [DEBUG][ACPU] acpuclk_8064_set_rate: Switching from
(bootloader) ACPU0 rate 918000 KHz -> 1512000 KHz
(bootloader) [295630] [DEBUG][ACPU] acpuclk_8064_set_rate: ACPU0 speed ch
(bootloader) ange complete
(bootloader) [295645] Enable hboot boot time perflock
(bootloader) [649006] --pm_check_power_on_status--[654019] Device CID is
(bootloader) not powerkey debounce CID
(bootloader) [661237]
(bootloader) m7_powerkey_debounce_checking: PowerKey debounce checking OK
(bootloader) . Continue bootup...
(bootloader) [665018] pm8921_vreg_disable function, vreg_id = 19
(bootloader) [668798] pm8921_vreg_disable function, vreg_id = 24
(bootloader) [671720] m7_vreg_init: enable lvs2 for XB
(bootloader) [684498] pm8921_vreg_disable function, vreg_id = 16
(bootloader) [690256] start block/size of [dzsystem] is different to [sys
(bootloader) tem]. Sync it.
(bootloader) [694466] dzsystem: start block = 1310721; size = 3801086
(bootloader) [695497] Update EBR
(bootloader) [714217] pm8921_vreg_disable function, vreg_id = 15
(bootloader) [717999] pm8921_vreg_disable function, vreg_id = 17
(bootloader) [721779] pm8921_vreg_disable function, vreg_id = 14
(bootloader) [734734] pm8921_vreg_disable function, vreg_id = 13
(bootloader) [956504] PMIC pm8921_fix_charger_lockup
(bootloader) [959340] [ADC] read adc channel VBAT(1):
(bootloader) [972428] [ADC] adc_code = 0x9590, physical=3931 mV
(bootloader) [976381] [BATT] batt_vol=3931 mV current=466 mA FSM=3
(bootloader) [980075] PMIC PMIC charger init by user parameters
(bootloader) [981879] PMIC revision 1: F4
(bootloader) [983598] PMIC revision 2: 6
(bootloader) [988668] PMIC Restart Reason: Triggered from KPD (power key
(bootloader) press)
(bootloader) [991418] PMIC [Batt]pm_chg_failed_clear
(bootloader) [996917] PMIC [Batt] pm8921_chg_hw_init: FSM=3 after clear c
(bootloader) hg fail bit
(bootloader) [999409] PMIC PMIC charger init done
(bootloader) [1001643] [BATT]3 cells initiated.
(bootloader) [1005939] [PMIC-BMS]r_sense=10 temp_channel=8 id_channel=9
(bootloader) [1009032] [ADC] read adc channel BATT_ID(9):
(bootloader) [1022034] [ADC] adc_code = 0x6620, physical=129 mV
(bootloader) [1024698] [BATT]: cur_cell is initiated
(bootloader) [1028650] [PMIC-BMS] set bms_battery_data (cell_id=2).
(bootloader) [1051212] [PMIC-BMS]BMS init OK -- ocv = 3924000
(bootloader) [1057227] [PMIC-BMS]pm8921_bms_read_ocv_updated_flag: OCV_UP
(bootloader) DATE_STORAGE = 0x0
(bootloader) [1062469] [PMIC-BMS]pm8921_bms_get_ocv_flag: OCV_UPDATE_STOR
(bootloader) AGE = 0x0
(bootloader) [1071577] radio_is_boot_from_shutdown(): 1, reset_reason=0xF
(bootloader) FDFDFFF, hw_reason=0x00000000, ocv_hw_reset=0x00000000
(bootloader) [1076818] [PMIC-BMS]pm8921_bms_set_ocv_flag: OCV_UPDATE_STOR
(bootloader) AGE = 0x0
(bootloader) [1080169] [ADC] read adc channel BATT_THERM(8):
(bootloader) [1093087] [ADC] adc_code = 0x87CB, physical=23 mV
(bootloader) [1095922] [ADC] read adc channel VBAT(1):
(bootloader) [1109009] [ADC] adc_code = 0x958C, physical=3930 mV
(bootloader) [1112102] [ADC] read adc channel BATT_ID(9):
(bootloader) [1125105] [ADC] adc_code = 0x6620, physical=129 mV
(bootloader) [1128456] [ADC] read adc channel BATT_THERM(8):
(bootloader) [1141371] [ADC] adc_code = 0x87CB, physical=23 mV
(bootloader) [1154309] [PMIC-BMS]P=65, adc_based_ocv=3963896, T=23
(bootloader) [1160582] [BATT] V=3930 mV, T=23 C, OCV=3924 mV, ID=129 mV,
(bootloader) I=256 mA, P=65, FSM=3
(bootloader) [1168487] radio_boot_mode() poweron_status=0x00000001, reset
(bootloader) _reason=0xFFDFDFFF, hw_reason=0x00000000
(bootloader) [1469384] E0902910 E0902E20
(bootloader) [1560535] usb_init_hw: pull up d+
(bootloader) [1591256] m7_set_charging(1)
(bootloader) [1592802] m7_hw_reset_nfc
(bootloader) [1822729] m7_init_display
(bootloader) [1826351] m7_init_display ID LCD_ID0=20 LCD_ID1=43
(bootloader) [1829196] m7_init_display ID id0=0 id1=1
(bootloader) [1835940] m7_init_display_panelid_940067
(bootloader) [1838431] SHARP_RENESAS FULL HD panel
(bootloader) [1855866] mdp_clock_init
(bootloader) [1869607] Video Mode
(bootloader) [1893119] mipi_read_back:0 0x21000012
(bootloader) [1916631] mipi_read_back:0 0x21000012
(bootloader) [1940141] mipi_read_back:0 0x21C5002D
(bootloader) [1944524] id1= 0x5D120000, id2= 0x5D120000, id3= 0x5D2D00C5
(bootloader) [1955520] M7 sharp renesas cmd panel ID=0x940069
(bootloader) [1957411] mipi_dsi_cmds_tx_ext
(bootloader) [2095810] [CIR] m7_init_cir, enter.
(bootloader) [2097958] [CIR] m7_init_cir, end.
(bootloader) [2101911] chipset_bootmode(): reset_reason=0xFFDFDFFF
(bootloader) [2103371] Board_PID : 203
(bootloader) [2107954] [FAT_ERROR] fat_open_file: can not find MDATA.CFG
(bootloader) [2109243] No MDATA.CFG
(bootloader) [2111015] Gyro ID = 0xA5
(bootloader) [2112787] Gyro ID = 0xD4
(bootloader) [2114591] Setting gy_type = 2
(bootloader) [2118654] reset rt5501 ret 0
(bootloader) [2122435] m7_init is finished: 18:08:20, Jun 4 2014
(bootloader) [2139166] TZ_HTC_SVC_ENC ret = 0
(bootloader) [2141228] TZ_HTC_SVC_ENC ret = 0
(bootloader) [2143376] valid keybox is existed
(bootloader) [2160596] TZ_HTC_SVC_ENC ret = 0
(bootloader) [2178499] TZ_HTC_SVC_ENC ret = 0
(bootloader) [2190692] radio_update_drm_config: read pg2fs_dapkey len (0)
(bootloader) failed
(bootloader) [2203117] [INFO][ACPU] acpuclk_set_rate: Set cpu0 rate to 91
(bootloader) 8000
(bootloader) [2210851] [DEBUG][ACPU] acpuclk_8064_set_rate: Switching fro
(bootloader) m ACPU0 rate 1512000 KHz -> 918000 KHz
(bootloader) [2216523] [DEBUG][ACPU] acpuclk_8064_set_rate: ACPU0 speed c
(bootloader) hange complete
(bootloader) [2219444] Disable hboot boot time perflock
(bootloader) [2221162] ARM11 Boot Mode: 9
(bootloader) [2223052] Platform: HBOOT-8064
(bootloader) [2371439] m7_init_backlight: panel_id=0x940069
(bootloader) [2374085] PWM ic version A2
(bootloader) [2482463] mipi_dsi_cmds_tx_ext
(bootloader) [2491733] m7_battery_stored_data_clean: magic_num=DDAACC11,
(bootloader) stored_soc=0, stored_ocv=0, stored_cc=0, currtime=ld
(bootloader) [2508712] Start Verify: 0
(bootloader) [3555752] SD: write failed in CMD25.
(bootloader) [3556869] usb_Vbus 0
(bootloader) [3657510] E0902910 E0902E20
(bootloader) [3748756] usb_init_hw: pull low d+
(bootloader) [3780172] usb_check_vbus: pull up d+
(bootloader) [3782062]
(bootloader) ###[ RUU Mode ]###
(bootloader) [3786015] chipset_bootmode(): reset_reason=0xFFDFDFFF
(bootloader) [3787648]
(bootloader) USB_STS_SUSPEND
(bootloader) [3789366] m7_set_charging(1)
(bootloader) [3792202] [ADC] read adc channel VBAT(1):
(bootloader) [3805300] [ADC] adc_code = 0x96AE, physical=4015 mV
(bootloader) [3946790]
(bootloader) USB_STS_RESET
(bootloader) [3948876] USB_SPEED_HIGH
(bootloader) [4034391] usb_setup:DEVICE_WRITE:SET_CONFIGURATION:1
(bootloader) [4035852] Set usb_ats = 0
(bootloader) [23958661] fastboot_command:[erase:cache]
(bootloader) [23992127]
(bootloader) eMMC Manufacturer ID: 45
(bootloader) [24002438] [ERR] Cmd35 polling status timed out, MCI_STATUS:
(bootloader) 0x4C0000
(bootloader) [24006906] [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [24009054] sdcc_erase, CMD35 fail
(bootloader) [24012749] emmc_erase(2704): sd_erase_sector failed!
(bootloader) [33783779] fastboot_command:[oem get_identifier_token]
(bootloader) [33786615] fb_cmd_oem:get_identifier_token
(bootloader) [33790911] register_debug_console: new entry ptr=0x85100140
(bootloader) [33793236]
(bootloader) [33795550] < Please cut following message >
(bootloader) [33798472] <<<< Identifier Token Start >>>>
(bootloader) [33801393] 823A218BF997F79A495BE9AB97F568A1
(bootloader) [33804315] 804A6CC58119AF2F1005C0C4379238B2
(bootloader) [33807236] XXXXXXXXXXXXXXXXXXXXXXXXXX
(bootloader) [33810158] 71DBE5538028F877F3919DD65AB1D3FA
(bootloader) [33813079] 8AE3595DD09FBC403851FE6060F7892A
(bootloader) [33816001] 3D60762CFD8EB920FDC021032EFB14E7
(bootloader) [33818922] B17286C55CA1D21B84B09CB5A3FC5A93
(bootloader) [33821844]XXXXXXXXXXXXXXXXXXXXXXXXXXXX
(bootloader) [33824765] 7E1BE0819355D304A81508BAE142B86F
(bootloader) [33827687] 97FB45471228032A2415BF15E32B54FD
(bootloader) [33830608] XXXXXXXXXXXXXXXXXXXXXXXXXXX
(bootloader) [33833530] D636283263114DE4AF91094204480B8A
(bootloader) [33836451] XXXXXXXXXXXXXXXXXXXXXXXXXXX
(bootloader) [33839373] 842491A414D885DE5BF2725A41FB6D19
(bootloader) [33842294] XXXXXXXXXXXXXXXXXXXXXXXXXX
(bootloader) [33845216] DFF76F5385176E8BE008D307E7476E8A
(bootloader) [33848137] <<<<< Identifier Token End >>>>>
(bootloader) [41704594] fastboot_command:[oem last_dmesg]
(bootloader) [41706570] fb_cmd_oem:last_dmesg
(bootloader) [41710866] register_debug_console: new entry ptr=0x85100140
(bootloader) [51470204] fastboot_command:[reboot-bootloader]
(bootloader) [8] check_ramlog_region: Backup last hboot ramlog.
OKAY
Execution time is 125(ms)
fastboot oem get_identifier_token (edited the XXX myself, not an error):
Code:
F:\AndroidFiles\HTC One M7 Bricked>fastboot oem get_identifier_token
... (bootloader)
(bootloader) < Please cut following message >
(bootloader) <<<< Identifier Token Start >>>>
(bootloader) B3B4555E729CDFDF99D4CDF01B9339AA
(bootloader) 42A8DDD9871B2B67831C7C743A460E48
(bootloader) XXXXXXXXXXXXXXXXXXXXXXXXXXX
(bootloader) 2E34613969BE70BA890B0953F3038F4F
(bootloader) 300604A85EE40B1F2167E9F0B67783CE
(bootloader) XXXXXXXXXXXXXXXXXXXXXXXXXXX
(bootloader) ABAD7CBDCBEBD3B75F9EBE51B44F2380
(bootloader) 6E521A664B3294914D49CD4E00C33F88
(bootloader) F31B7A5C75EB44C6CF73B3D97A2C9A40
(bootloader) 77FB7587D2993AA7A5DE5F8BD45B2169
(bootloader) 3869966FD04391583EA886F02C34764D
(bootloader) XXXXXXXXXXXXXXXXXXXXXXXXXX
(bootloader) 2B55E27212C53121F9BF0F8ACC4C4FC1
(bootloader) AFDB68D9674E993AAF425720FC5FE080
(bootloader) 54177D5B9C6577971899A0EE2C556927
(bootloader) 897054342DBA6F9B68EA0E7E48FE54CE
(bootloader) <<<<< Identifier Token End >>>>>
OKAY
Execution time is 1(s)
Didnt try this one right now, but all flash commands before got stuck on the Sending XXX.img/zip
fastboot flash recovery <name of recovery>.img
This ones just show the "..." and hang there:
fastboot reboot-bootloader
fastboot reboot
fastboot oem boot
fastboot oem rebootRUU
Also tried downloading a RUU.exe file, ran it, but after accepting license and clicking next, it hangs a little bit on Verifying Android phone information, and then it just fails with error 170
ERROR [170]: USB CONNECTION ERROR
Click to expand...
Click to collapse
i'll have to look at that later, as i'm off for tonight, two things though
1- are you using "adb version" 1.0.32 (or some outdated one?) cause the output is somewhat different than what i usually see
2- your execution times look very long even for trivial commands, mine return something like:
OKAY [ 0.181s]
finished. total time: 0.184s
so it could be either a bad fastboot.exe or still a cable/PC/USB port problem
nkk71 said:
i'll have to look at that later, as i'm off for tonight, two things though
1- are you using "adb version" 1.0.32 (or some outdated one?) cause the output is somewhat different than what i usually see
2- your execution times look very long even for trivial commands, mine return something like:
OKAY [ 0.181s]
finished. total time: 0.184s
so it could be either a bad fastboot.exe or still a cable/PC/USB port problem
Click to expand...
Click to collapse
Just in case, I downloaded adb version 1.0.32 from:
http://forum.xda-developers.com/htc-one/general/tool-updated-adb-version-1-0-32-fastboot-t2932160
Still same results.
Ill try to get some new USB cables, but I have tried with two, in different computers, so not really sure if it is related to that.
Still, it cant hurt, so Ill look into that and maybe try another pc too.
masok said:
Just in case, I downloaded adb version 1.0.32 from:
http://forum.xda-developers.com/htc-one/general/tool-updated-adb-version-1-0-32-fastboot-t2932160
Still same results.
Ill try to get some new USB cables, but I have tried with two, in different computers, so not really sure if it is related to that.
Still, it cant hurt, so Ill look into that and maybe try another pc too.
Click to expand...
Click to collapse
oops, just saw this:
Code:
...
(bootloader) [2508712] Start Verify: 0
[B][COLOR="Red"](bootloader) [3555752] SD: write failed in CMD25.[/COLOR][/B]
...
i'm out of ideas, looks like it's fried
maybe someone else has any idea?
---------- Post added 10th May 2015 at 00:13 ---------- Previous post was 9th May 2015 at 23:58 ----------
@alray
any ideas?
nkk71 said:
oops, just saw this:
Code:
...
(bootloader) [2508712] Start Verify: 0
[B][COLOR="Red"](bootloader) [3555752] SD: write failed in CMD25.[/COLOR][/B]
...
i'm out of ideas, looks like it's fried
maybe someone else has any idea?
---------- Post added 10th May 2015 at 00:13 ---------- Previous post was 9th May 2015 at 23:58 ----------
@alray
any ideas?
Click to expand...
Click to collapse
Code:
(bootloader) [3555752] SD: write failed in CMD25.
and
Code:
(bootloader) [24002438] [ERR] Cmd35 polling status timed out, MCI_STATUS:
(bootloader) 0x4C0000
(bootloader) [24006906] [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [24009054] sdcc_erase, CMD35 fail
(bootloader) [24012749] emmc_erase(2704): sd_erase_sector failed!
Makes me believe its a bad emmc. Looks like the emmc can still communicate: reset & initialization of the emmc works fine, the board can read the clock rate and all other info of the emmc fine, can read random blocks without problems (see CMD17). But each time it tries to write (or erase) a block it fails (CMD25 and CMD35 error)
So yes i think its fried or like if it was stuck in some kind of "read only" mode. Not the first I see this CMD25 error in this forum but usually it comes with the CMD17/18 read error [SD_HW_ERROR].
edit:
Btw that would explain why some fastboot commands are working an others not.
fastboot oem get_identifier_token for example only require to read the appropriate blocks where the data and encryption key to generate the token are stored.
fastboot oem lock will require to write to some blocks of the pg1fs partition to change the bootloader status.
alray said:
Code:
(bootloader) [3555752] SD: write failed in CMD25.
and
Code:
(bootloader) [24002438] [ERR] Cmd35 polling status timed out, MCI_STATUS:
(bootloader) 0x4C0000
(bootloader) [24006906] [ERR] sdcc_command: sdcc_poll_status error, rc: 2
(bootloader) [24009054] sdcc_erase, CMD35 fail
(bootloader) [24012749] emmc_erase(2704): sd_erase_sector failed!
Makes me believe its a bad emmc. Looks like the emmc can still communicate: reset & initialization of the emmc works fine, the board can read the clock rate and all other info of the emmc fine, can read random blocks without problems (see CMD17). But each time it tries to write (or erase) a block it fails (CMD25 and CMD35 error)
So yes i think its fried or like if it was stuck in some kind of "read only" mode. Not the first I see this CMD25 error in this forum but usually it comes with the CMD17/18 read error [SD_HW_ERROR].
edit:
Btw that would explain why some fastboot commands are working an others not.
fastboot oem get_identifier_token for example only require to read the appropriate blocks where the data and encryption key to generate the token are stored.
fastboot oem lock will require to write to some blocks of the pg1fs partition to change the bootloader status.
Click to expand...
Click to collapse
Thats not good news, but I guess Ill keep trying, I have nothing to lose here.
Also, for some reason, there seems to be a bit of a difference with some commands now.
fastboot getvar all still doesnt complete and hangs there, but before, I had tried nkk71
fastboot flash zip fw_6.06.401.1_custom.zip
And it hanged there on the sending or would just fail.
Now it seemed to start, it sended the zip, and it started writing, but it hanged on checking custom ID.
I will keep trying
Code:
F:\AndroidFiles\HTC One M7 Bricked>fastboot devices
FA3C5W903875 fastboot
F:\AndroidFiles\HTC One M7 Bricked>fastboot flash zip fw_6.06.401.1_custom.zip
sending 'zip'... (29596 KB) OKAY
sending time = 2.446 secs
writing 'zip'... (bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
^C
F:\AndroidFiles\HTC One M7 Bricked>fastboot devices
???????????? fastboot
masok said:
F:\AndroidFiles\HTC One M7 Bricked>fastboot devices
???????????? fastboot
Click to expand...
Click to collapse
hate to be the bearer of bad news, but looks like the chip is now completely fried out
i'm guessing the hardware was degrading over time, (probably also why the first ruu failed), and has now reached eol
Part of this problem was posted within this thread... Apologies if this violates forum rules but I am in a dire situation and hopeful that this will get some attention
HTC One, m7, T-mobile variant, s-off/unlocked, superCID. Here is getvar
Code:
C:\ADB>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.27.531.11
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3853mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.078s
I was trying to update my rom and things went foul. Data and system partitions got messed up.
I can boot to bootloader, I can install custom recovery and use fastboot and adb commands without a problem. But I cannot manage to get an working OS installed.
I ran this RUU as exe and also as a rom.zip from the rebootRUU screen
RUU_M7_UL_JB_50_TMOUS_1.27.531.11_Radio_4A.17.3250.20_10.40.1150.04_release_324846_signed (MD5 checked)
Everything finishes successfully, but reboot gets stuck at htc logo screen (and I did wait)
Code:
C:\ADB>fastboot oem rebootRUU
< waiting for device >
...
(bootloader) Start Verify: 0
OKAY [ 0.105s]
finished. total time: 0.105s
C:\ADB>fastboot flash zip rom.zip
sending 'zip' (1037365 KB)...
OKAY [ 50.192s]
writing 'zip'...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping for pre-update check...
(bootloader) start image[hboot] flushing...
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
FAILED (remote: 90 hboot pre-update! please flush image again immediately)
finished. total time: 56.943s
C:\ADB>fastboot flash zip rom.zip
< waiting for device >
sending 'zip' (1037365 KB)...
OKAY [ 50.187s]
writing 'zip'...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[boot] unzipping & flushing...
(bootloader) [RUU]UZ,boot,0
(bootloader) [RUU]UZ,boot,12
(bootloader) [RUU]UZ,boot,23
(bootloader) [RUU]UZ,boot,36
(bootloader) [RUU]UZ,boot,49
(bootloader) [RUU]UZ,boot,60
(bootloader) [RUU]UZ,boot,72
(bootloader) [RUU]UZ,boot,86
(bootloader) [RUU]UZ,boot,99
(bootloader) [RUU]UZ,boot,100
(bootloader) [RUU]WP,boot,0
(bootloader) [RUU]WP,boot,99
(bootloader) [RUU]WP,boot,100
(bootloader) ...... Successful
(bootloader) start image[recovery] unzipping & flushing...
(bootloader) [RUU]UZ,recovery,0
(bootloader) [RUU]UZ,recovery,11
(bootloader) [RUU]UZ,recovery,21
(bootloader) [RUU]UZ,recovery,32
(bootloader) [RUU]UZ,recovery,43
(bootloader) [RUU]UZ,recovery,53
(bootloader) [RUU]UZ,recovery,72
(bootloader) [RUU]UZ,recovery,85
(bootloader) [RUU]UZ,recovery,97
(bootloader) [RUU]UZ,recovery,100
(bootloader) [RUU]WP,recovery,0
(bootloader) [RUU]WP,recovery,99
(bootloader) [RUU]WP,recovery,100
(bootloader) ...... Successful
(bootloader) start image[system] unzipping & flushing...
(bootloader) [RUU]UZ,system,0
(bootloader) [RUU]UZ,system,0
(bootloader) [RUU]UZ,system,1
(bootloader) [RUU]UZ,system,2
(bootloader) [RUU]UZ,system,3
(bootloader) [RUU]UZ,system,4
(bootloader) [RUU]UZ,system,5
(bootloader) [RUU]UZ,system,6
(bootloader) [RUU]UZ,system,7
(bootloader) [RUU]UZ,system,7
(bootloader) [RUU]UZ,system,8
(bootloader) [RUU]UZ,system,9
(bootloader) [RUU]UZ,system,10
(bootloader) [RUU]UZ,system,11
(bootloader) [RUU]UZ,system,12
(bootloader) [RUU]UZ,system,13
(bootloader) [RUU]UZ,system,14
(bootloader) [RUU]WP,system,0
(bootloader) [RUU]WP,system,0
(bootloader) [RUU]WP,system,1
(bootloader) [RUU]WP,system,2
(bootloader) [RUU]WP,system,3
(bootloader) [RUU]WP,system,4
(bootloader) [RUU]WP,system,5
(bootloader) [RUU]WP,system,6
(bootloader) [RUU]WP,system,7
(bootloader) [RUU]WP,system,7
(bootloader) [RUU]WP,system,8
(bootloader) [RUU]WP,system,9
(bootloader) [RUU]WP,system,10
(bootloader) [RUU]WP,system,11
(bootloader) [RUU]WP,system,12
(bootloader) [RUU]WP,system,13
(bootloader) [RUU]WP,system,14
(bootloader) [RUU]UZ,system,14
(bootloader) [RUU]UZ,system,14
(bootloader) [RUU]UZ,system,15
(bootloader) [RUU]UZ,system,16
(bootloader) [RUU]UZ,system,17
(bootloader) [RUU]UZ,system,18
(bootloader) [RUU]UZ,system,19
(bootloader) [RUU]UZ,system,20
(bootloader) [RUU]UZ,system,21
(bootloader) [RUU]UZ,system,21
(bootloader) [RUU]UZ,system,22
(bootloader) [RUU]UZ,system,23
(bootloader) [RUU]UZ,system,24
(bootloader) [RUU]UZ,system,25
(bootloader) [RUU]UZ,system,26
(bootloader) [RUU]UZ,system,27
(bootloader) [RUU]UZ,system,28
(bootloader) [RUU]WP,system,14
(bootloader) [RUU]WP,system,14
(bootloader) [RUU]WP,system,15
(bootloader) [RUU]WP,system,16
(bootloader) [RUU]WP,system,17
(bootloader) [RUU]WP,system,18
(bootloader) [RUU]WP,system,19
(bootloader) [RUU]WP,system,20
(bootloader) [RUU]WP,system,21
(bootloader) [RUU]WP,system,21
(bootloader) [RUU]WP,system,22
(bootloader) [RUU]WP,system,23
(bootloader) [RUU]WP,system,24
(bootloader) [RUU]WP,system,25
(bootloader) [RUU]WP,system,26
(bootloader) [RUU]WP,system,27
(bootloader) [RUU]WP,system,28
(bootloader) [RUU]UZ,system,28
(bootloader) [RUU]UZ,system,28
(bootloader) [RUU]UZ,system,29
(bootloader) [RUU]UZ,system,30
(bootloader) [RUU]UZ,system,31
(bootloader) [RUU]UZ,system,32
(bootloader) [RUU]UZ,system,33
(bootloader) [RUU]UZ,system,34
(bootloader) [RUU]UZ,system,35
(bootloader) [RUU]UZ,system,35
(bootloader) [RUU]UZ,system,36
(bootloader) [RUU]UZ,system,37
(bootloader) [RUU]UZ,system,38
(bootloader) [RUU]UZ,system,39
(bootloader) [RUU]UZ,system,40
(bootloader) [RUU]UZ,system,41
(bootloader) [RUU]UZ,system,42
(bootloader) [RUU]WP,system,28
(bootloader) [RUU]WP,system,28
(bootloader) [RUU]WP,system,29
(bootloader) [RUU]WP,system,30
(bootloader) [RUU]WP,system,31
(bootloader) [RUU]WP,system,32
(bootloader) [RUU]WP,system,33
(bootloader) [RUU]WP,system,34
(bootloader) [RUU]WP,system,35
(bootloader) [RUU]WP,system,35
(bootloader) [RUU]WP,system,36
(bootloader) [RUU]WP,system,37
(bootloader) [RUU]WP,system,38
(bootloader) [RUU]WP,system,39
(bootloader) [RUU]WP,system,40
(bootloader) [RUU]WP,system,41
(bootloader) [RUU]WP,system,42
(bootloader) [RUU]UZ,system,42
(bootloader) [RUU]UZ,system,42
(bootloader) [RUU]UZ,system,43
(bootloader) [RUU]UZ,system,44
(bootloader) [RUU]UZ,system,45
(bootloader) [RUU]UZ,system,46
(bootloader) [RUU]UZ,system,47
(bootloader) [RUU]UZ,system,48
(bootloader) [RUU]UZ,system,49
(bootloader) [RUU]UZ,system,50
(bootloader) [RUU]UZ,system,51
(bootloader) [RUU]UZ,system,52
(bootloader) [RUU]UZ,system,53
(bootloader) [RUU]UZ,system,54
(bootloader) [RUU]UZ,system,55
(bootloader) [RUU]UZ,system,55
(bootloader) [RUU]UZ,system,57
(bootloader) [RUU]WP,system,42
(bootloader) [RUU]WP,system,42
(bootloader) [RUU]WP,system,43
(bootloader) [RUU]WP,system,44
(bootloader) [RUU]WP,system,45
(bootloader) [RUU]WP,system,46
(bootloader) [RUU]WP,system,47
(bootloader) [RUU]WP,system,48
(bootloader) [RUU]WP,system,49
(bootloader) [RUU]WP,system,50
(bootloader) [RUU]WP,system,51
(bootloader) [RUU]WP,system,52
(bootloader) [RUU]WP,system,53
(bootloader) [RUU]WP,system,54
(bootloader) [RUU]WP,system,55
(bootloader) [RUU]WP,system,55
(bootloader) [RUU]WP,system,57
(bootloader) [RUU]UZ,system,57
(bootloader) [RUU]UZ,system,57
(bootloader) [RUU]UZ,system,58
(bootloader) [RUU]UZ,system,59
(bootloader) [RUU]UZ,system,60
(bootloader) [RUU]UZ,system,61
(bootloader) [RUU]UZ,system,62
(bootloader) [RUU]UZ,system,63
(bootloader) [RUU]UZ,system,64
(bootloader) [RUU]UZ,system,64
(bootloader) [RUU]UZ,system,65
(bootloader) [RUU]UZ,system,66
(bootloader) [RUU]UZ,system,67
(bootloader) [RUU]UZ,system,68
(bootloader) [RUU]UZ,system,69
(bootloader) [RUU]UZ,system,70
(bootloader) [RUU]UZ,system,71
(bootloader) [RUU]WP,system,57
(bootloader) [RUU]WP,system,57
(bootloader) [RUU]WP,system,58
(bootloader) [RUU]WP,system,59
(bootloader) [RUU]WP,system,60
(bootloader) [RUU]WP,system,61
(bootloader) [RUU]WP,system,62
(bootloader) [RUU]WP,system,63
(bootloader) [RUU]WP,system,64
(bootloader) [RUU]WP,system,64
(bootloader) [RUU]WP,system,65
(bootloader) [RUU]WP,system,66
(bootloader) [RUU]WP,system,67
(bootloader) [RUU]WP,system,68
(bootloader) [RUU]WP,system,69
(bootloader) [RUU]WP,system,70
(bootloader) [RUU]WP,system,71
(bootloader) [RUU]UZ,system,71
(bootloader) [RUU]UZ,system,71
(bootloader) [RUU]UZ,system,72
(bootloader) [RUU]UZ,system,73
(bootloader) [RUU]UZ,system,74
(bootloader) [RUU]UZ,system,75
(bootloader) [RUU]UZ,system,76
(bootloader) [RUU]UZ,system,77
(bootloader) [RUU]UZ,system,78
(bootloader) [RUU]UZ,system,78
(bootloader) [RUU]UZ,system,79
(bootloader) [RUU]UZ,system,80
(bootloader) [RUU]UZ,system,81
(bootloader) [RUU]UZ,system,82
(bootloader) [RUU]UZ,system,83
(bootloader) [RUU]UZ,system,84
(bootloader) [RUU]UZ,system,85
(bootloader) [RUU]WP,system,71
(bootloader) [RUU]WP,system,71
(bootloader) [RUU]WP,system,72
(bootloader) [RUU]WP,system,73
(bootloader) [RUU]WP,system,74
(bootloader) [RUU]WP,system,75
(bootloader) [RUU]WP,system,76
(bootloader) [RUU]WP,system,77
(bootloader) [RUU]WP,system,78
(bootloader) [RUU]WP,system,78
(bootloader) [RUU]WP,system,79
(bootloader) [RUU]WP,system,80
(bootloader) [RUU]WP,system,81
(bootloader) [RUU]WP,system,82
(bootloader) [RUU]WP,system,83
(bootloader) [RUU]WP,system,84
(bootloader) [RUU]WP,system,85
(bootloader) [RUU]UZ,system,85
(bootloader) [RUU]UZ,system,86
(bootloader) [RUU]UZ,system,87
(bootloader) [RUU]UZ,system,88
(bootloader) [RUU]UZ,system,89
(bootloader) [RUU]UZ,system,90
(bootloader) [RUU]UZ,system,91
(bootloader) [RUU]UZ,system,92
(bootloader) [RUU]UZ,system,93
(bootloader) [RUU]UZ,system,94
(bootloader) [RUU]UZ,system,95
(bootloader) [RUU]UZ,system,96
(bootloader) [RUU]UZ,system,97
(bootloader) [RUU]UZ,system,98
(bootloader) [RUU]UZ,system,99
(bootloader) [RUU]UZ,system,100
(bootloader) [RUU]WP,system,85
(bootloader) [RUU]WP,system,85
(bootloader) [RUU]WP,system,86
(bootloader) [RUU]WP,system,87
(bootloader) [RUU]WP,system,88
(bootloader) [RUU]WP,system,89
(bootloader) [RUU]WP,system,90
(bootloader) [RUU]WP,system,91
(bootloader) [RUU]WP,system,92
(bootloader) [RUU]WP,system,93
(bootloader) [RUU]WP,system,94
(bootloader) [RUU]WP,system,95
(bootloader) [RUU]WP,system,96
(bootloader) [RUU]WP,system,97
(bootloader) [RUU]WP,system,98
(bootloader) [RUU]WP,system,98
(bootloader) [RUU]WP,system,100
(bootloader) ...... Successful
(bootloader) start image[sp1] unzipping & flushing...
(bootloader) [RUU]UZ,sp1,0
(bootloader) [RUU]UZ,sp1,99
(bootloader) [RUU]UZ,sp1,100
(bootloader) [RUU]WP,sp1,0
(bootloader) [RUU]WP,sp1,100
(bootloader) ...... Successful
(bootloader) start image[dzdata] unzipping & flushing...
(bootloader) [RUU]UZ,dzdata,0
(bootloader) [RUU]UZ,dzdata,5
(bootloader) [RUU]UZ,dzdata,14
(bootloader) [RUU]UZ,dzdata,19
(bootloader) [RUU]UZ,dzdata,29
(bootloader) [RUU]UZ,dzdata,38
(bootloader) [RUU]UZ,dzdata,47
(bootloader) [RUU]UZ,dzdata,52
(bootloader) [RUU]UZ,dzdata,57
(bootloader) [RUU]UZ,dzdata,66
(bootloader) [RUU]UZ,dzdata,71
(bootloader) [RUU]UZ,dzdata,76
(bootloader) [RUU]UZ,dzdata,81
(bootloader) [RUU]UZ,dzdata,90
(bootloader) [RUU]UZ,dzdata,97
(bootloader) [RUU]UZ,dzdata,100
(bootloader) [RUU]WP,dzdata,0
(bootloader) [RUU]WP,dzdata,11
(bootloader) [RUU]WP,dzdata,23
(bootloader) [RUU]WP,dzdata,36
(bootloader) [RUU]WP,dzdata,70
(bootloader) [RUU]WP,dzdata,77
(bootloader) [RUU]WP,dzdata,98
(bootloader) [RUU]WP,dzdata,100
(bootloader) ...... Successful
(bootloader) start image[sbl2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl2,0
(bootloader) [RUU]UZ,sbl2,100
(bootloader) [RUU]WP,sbl2,0
(bootloader) [RUU]WP,sbl2,100
(bootloader) ...... Successful
(bootloader) start image[sbl3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl3,0
(bootloader) [RUU]UZ,sbl3,100
(bootloader) [RUU]WP,sbl3,0
(bootloader) [RUU]WP,sbl3,100
(bootloader) ...... Successful
(bootloader) start image[tz] unzipping & flushing...
(bootloader) [RUU]UZ,tz,0
(bootloader) [RUU]UZ,tz,100
(bootloader) [RUU]WP,tz,0
(bootloader) [RUU]WP,tz,100
(bootloader) ...... Successful
(bootloader) start image[rpm] unzipping & flushing...
(bootloader) [RUU]UZ,rpm,0
(bootloader) [RUU]UZ,rpm,100
(bootloader) [RUU]WP,rpm,0
(bootloader) [RUU]WP,rpm,100
(bootloader) ...... Successful
(bootloader) start image[adsp] unzipping & flushing...
(bootloader) [RUU]UZ,adsp,0
(bootloader) [RUU]UZ,adsp,16
(bootloader) [RUU]UZ,adsp,26
(bootloader) [RUU]UZ,adsp,37
(bootloader) [RUU]UZ,adsp,49
(bootloader) [RUU]UZ,adsp,60
(bootloader) [RUU]UZ,adsp,71
(bootloader) [RUU]UZ,adsp,82
(bootloader) [RUU]UZ,adsp,94
(bootloader) [RUU]UZ,adsp,100
(bootloader) [RUU]WP,adsp,0
(bootloader) [RUU]WP,adsp,100
(bootloader) ...... Successful
(bootloader) start image[pg2fs_spcustom] unzipping & flushing...
(bootloader) [RUU]UZ,pg2fs_spcustom,0
(bootloader) [RUU]UZ,pg2fs_spcustom,38
(bootloader) [RUU]UZ,pg2fs_spcustom,99
(bootloader) [RUU]UZ,pg2fs_spcustom,100
(bootloader) ...... Successful
(bootloader) start image[tp] unzipping & flushing...
(bootloader) [RUU]UZ,tp,0
(bootloader) [RUU]UZ,tp,100
(bootloader) ...... Successful
(bootloader) start image[sbl1-1] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-1,0
(bootloader) [RUU]UZ,sbl1-1,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-2] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-2,0
(bootloader) [RUU]UZ,sbl1-2,100
(bootloader) signature checking...
(bootloader) verified fail
(bootloader) ..... Bypassed
(bootloader) start image[sbl1-3] unzipping & flushing...
(bootloader) [RUU]UZ,sbl1-3,0
(bootloader) [RUU]UZ,sbl1-3,100
(bootloader) signature checking...
(bootloader) [RUU]WP,sbl1-3,0
(bootloader) [RUU]WP,sbl1-3,100
(bootloader) ...... Successful
(bootloader) start image[radio] unzipping & flushing...
(bootloader) [RUU]UZ,radio,0
(bootloader) [RUU]UZ,radio,7
(bootloader) [RUU]UZ,radio,13
(bootloader) [RUU]UZ,radio,20
(bootloader) [RUU]UZ,radio,26
(bootloader) [RUU]UZ,radio,33
(bootloader) [RUU]UZ,radio,40
(bootloader) [RUU]UZ,radio,46
(bootloader) [RUU]UZ,radio,53
(bootloader) [RUU]UZ,radio,59
(bootloader) [RUU]UZ,radio,67
(bootloader) [RUU]UZ,radio,73
(bootloader) [RUU]UZ,radio,79
(bootloader) [RUU]UZ,radio,87
(bootloader) [RUU]UZ,radio,93
(bootloader) [RUU]UZ,radio,99
(bootloader) [RUU]UZ,radio,100
(bootloader) [RUU]WP,radio,0
(bootloader) [RUU]WP,radio,26
(bootloader) [RUU]WP,radio,53
(bootloader) [RUU]WP,radio,79
(bootloader) [RUU]WP,radio,100
(bootloader) ...... Successful
(bootloader) start image[rcdata] unzipping & flushing...
(bootloader) [RUU]UZ,rcdata,0
(bootloader) [RUU]WP,rcdata,0
(bootloader) ...... Successful
OKAY [237.650s]
finished. total time: 287.839s
Here is the dmesg immediately after I boot into the bootloader
Code:
C:\ADB>fastboot oem dmesg
...
(bootloader) [8] register_debug_console: new entry ptr=0x8CF00800
(bootloader) [8] -------------------hboot start
(bootloader) [8] chipset_init: DDR - Hynix
(bootloader) [8] chipset_ver is 207150E1
(bootloader) [989] PMIC Restart Reason: Triggered from KPD (power key pre
(bootloader) ss)
(bootloader) [1015] pm8921_enable_smpl: smpl=0xD, SMPL_EN_RESET=1
(bootloader) [1039] pm8921_enable_smpl: smpl=0x9, SMPL_EN_RESET=0
(bootloader) [1057] pm8921_init: poweron_status=0x1
(bootloader) [1089] sdhw_7xxx_open: id=4
(bootloader) [19751] sdcc_init_memory_device done
(bootloader) [33492] sdcc_eMMC_target_init()
(bootloader) [33511] Initializing MMC host data structure and clock!
(bootloader) [34534] clock_set_enable : slot=1, mclk=400000
(bootloader) [38575] Command sent: CMD0 MCI_CMD_REG:400 MCI_ARG:0
(bootloader) [38975] Command sent: CMD1 MCI_CMD_REG:441 MCI_ARG:40FF8000
(bootloader) [39740] Command response received: 40FF8080
(bootloader) [40779] Command sent: CMD1 MCI_CMD_REG:441 MCI_ARG:40FF8000
(bootloader) [41543] Command response received: 40FF8080
(bootloader) [42582] Command sent: CMD1 MCI_CMD_REG:441 MCI_ARG:40FF8000
(bootloader) [43346] Command response received: 40FF8080
(bootloader) [44386] Command sent: CMD1 MCI_CMD_REG:441 MCI_ARG:40FF8000
(bootloader) [45150] Command response received: C0FF8080
(bootloader) [45189] Command sent: CMD2 MCI_CMD_REG:4C2 MCI_ARG:0
(bootloader) [46556] Command response received: 02AF30FA
(bootloader) [46573] Decoded CID fields:
(bootloader) [46588] Manufacturer ID: 90
(bootloader) [46602] OEM ID: 0x14A
(bootloader) [46617] Product Name: HBG4e
(bootloader) [46633] Product revision: 0.1
(bootloader) [46648] Product serial number: 072A02AF
(bootloader) [46664] Manufacturing date: 0 2000
(bootloader) [46703] Command sent: CMD3 MCI_CMD_REG:443 MCI_ARG:20000
(bootloader) [47510] Command response received: 00000500
(bootloader) [47550] Command sent: CMD9 MCI_CMD_REG:4C9 MCI_ARG:20000
(bootloader) [48965] Command response received: 8A4040D2
(bootloader) [49005] Command sent: CMD7 MCI_CMD_REG:447 MCI_ARG:20000
(bootloader) [49808] Command response received: 00000700
(bootloader) [49850] Command sent: CMD8 MCI_CMD_REG:448 MCI_ARG:0
(bootloader) [50650] Command response received: 00000900
(bootloader) [79331] Decoded CSD fields:
(bootloader) [79346] cmmc_structure: 3
(bootloader) [79361] card_cmd_class: F5
(bootloader) [79376] write_blk_len: 512
(bootloader) [79390] read_blk_len: 512
(bootloader) [79405] r2w_factor: 2
(bootloader) [79420] sector_size: 0
(bootloader) [79434] c_size_mult:7
(bootloader) [79449] c_size: 4095
(bootloader) [79464] nsac_clk_cycle: 100
(bootloader) [79478] taac_ns: 15000000
(bootloader) [79493] tran_speed: 0 kbps
(bootloader) [79508] erase_blk_len: 0
(bootloader) [79524] read_blk_misalign: 0
(bootloader) [79539] write_blk_misalign: 0
(bootloader) [79554] read_blk_partial: 0
(bootloader) [79569] write_blk_partial: 0
(bootloader) [79584] Card Capacity: llu Bytes
(bootloader) [79601] Read timeout set: 100000000 ns
(bootloader) [79618] Write timeout set: 100000000 ns
(bootloader) [79658] Command sent: CMD6 MCI_CMD_REG:446 MCI_ARG:3B90100
(bootloader) [80466] Command response received: 00000900
(bootloader) [80506] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [81308] Command response received: 00000E00
(bootloader) [81348] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [82151] Command response received: 00000900
(bootloader) [83173] clock_set_enable : slot=1, mclk=48000000
(bootloader) [83212] Command sent: CMD6 MCI_CMD_REG:446 MCI_ARG:3AF0100
(bootloader) [83232] Command response received: 00000900
(bootloader) [83271] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [83290] Command response received: 00000E00
(bootloader) [83330] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [83349] Command response received: 00000E00
(bootloader) [83389] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [83408] Command response received: 00000E00
(bootloader) [83447] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [83466] Command response received: 00000900
(bootloader) [83506] Command sent: CMD6 MCI_CMD_REG:446 MCI_ARG:3B70200
(bootloader) [83525] Command response received: 00000900
(bootloader) [83565] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [83584] Command response received: 00000E00
(bootloader) [83624] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [83643] Command response received: 00000E00
(bootloader) [83683] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [83702] Command response received: 00000E00
(bootloader) [83742] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [83761] Command response received: 00000E00
(bootloader) [83800] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [83819] Command response received: 00000E00
(bootloader) [83859] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [83878] Command response received: 00000E00
(bootloader) [83918] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [83937] Command response received: 00000900
(bootloader) [84980] Command sent: CMD8 MCI_CMD_REG:448 MCI_ARG:0
(bootloader) [84998] Command response received: 00000900
(bootloader) [85435] Command sent: CMD13 MCI_CMD_REG:44D MCI_ARG:20000
(bootloader) [85454] Command response received: 00000900
(bootloader) [85471] erase_grpsize: 31
(bootloader) [85485] erase_grpmult: 31
(bootloader) [85500] wp_grpsize: 15
(bootloader) [85515] wp_grpen: 1
(bootloader) [85529] perm_wp: 0
(bootloader) [85543] temp_wp: 0
(bootloader) [85558] part_config: 0
(bootloader) [85572] erase_group_def: 1
(bootloader) [85587] RST_n_Function: 1
(bootloader) [85601] user_wp: 0
(bootloader) [85641] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:0
(bootloader) [85660] Command response received: 00000900
(bootloader) [86159] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:3FFDF
(bootloader) [86178] Command response received: 00000900
(bootloader) [86418] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:40000
(bootloader) [86437] Command response received: 00000900
(bootloader) [86651] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:40201
(bootloader) [86670] Command response received: 00000900
(bootloader) [86831] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:47BB5
(bootloader) [86850] Command response received: 00000900
(bootloader) [87044] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:47DB6
(bootloader) [87063] Command response received: 00000900
(bootloader) [87225] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:485B7
(bootloader) [87244] Command response received: 00000900
(bootloader) [87400] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:487B8
(bootloader) [87419] Command response received: 00000900
(bootloader) [87579] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:497B9
(bootloader) [87598] Command response received: 00000900
(bootloader) [87753] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:4A7FB
(bootloader) [87771] Command response received: 00000900
(bootloader) [87929] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:4CFFC
(bootloader) [87948] Command response received: 00000900
(bootloader) [88146] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:4D7FD
(bootloader) [88164] Command response received: 00000900
(bootloader) [88363] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:4DFFE
(bootloader) [88382] Command response received: 00000900
(bootloader) [88539] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:6C001
(bootloader) [88558] Command response received: 00000900
(bootloader) [88764] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:6FFFF
(bootloader) [88783] Command response received: 00000900
(bootloader) [88939] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:80000
(bootloader) [88957] Command response received: 00000900
(bootloader) [89156] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:807FE
(bootloader) [89175] Command response received: 00000900
(bootloader) [89337] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:827FF
(bootloader) [89356] Command response received: 00000900
(bootloader) [89515] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:84800
(bootloader) [89534] Command response received: 00000900
(bootloader) [89771] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8E801
(bootloader) [89790] Command response received: 00000900
(bootloader) [89994] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8E80A
(bootloader) [90013] Command response received: 00000900
(bootloader) [90167] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8EA0B
(bootloader) [90186] Command response received: 00000900
(bootloader) [90338] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8EA2C
(bootloader) [90357] Command response received: 00000900
(bootloader) [90550] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8F42E
(bootloader) [90569] Command response received: 00000900
(bootloader) [90766] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8F4AF
(bootloader) [90785] Command response received: 00000900
(bootloader) [90969] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8FCB0
(bootloader) [90988] Command response received: 00000900
(bootloader) [91179] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:C0000
(bootloader) [91197] Command response received: 00000900
(bootloader) [91430] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:DA7FE
(bootloader) [91449] Command response received: 00000900
(bootloader) [91647] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:100000
(bootloader) [91666] Command response received: 00000900
(bootloader) [91877] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:12FFFF
(bootloader) [91896] Command response received: 00000900
(bootloader) [92141] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:138000
(bootloader) [92160] Command response received: 00000900
(bootloader) [92365] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:140000
(bootloader) [92384] Command response received: 00000900
(bootloader) [92583] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:4DFFFF
(bootloader) [92601] Command response received: 00000900
(bootloader) [92799] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:61FFFF
(bootloader) [92818] Command response received: 00000900
(bootloader) [93015] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:220000
(bootloader) [93034] Command response received: 00000900
(bootloader) [93216] check pg1fs
(bootloader) [97835] check pg2fs
(bootloader) [168100] chipset_setting_init
(bootloader) [171666] chipset_setting_init: read pid 203
(bootloader) [171698] SECURE_SMEM_STRUCT 8CF04000
(bootloader) [175173] read_simlock(1380): 6E7432F0, 4E07AFC7
(bootloader) [175833] radio_init_secure_smem(797): C9F35678, 0
(bootloader) [182040] read_simlock_password(366): EB, 95, 41, 94
(bootloader) [182078] unlock_rec[0] = 0x8CF07000
(bootloader) [184835] unlock_rec[1] = 0x8CF08000
(bootloader) [187579] simlock_passwd 0x8CF06000
(bootloader) [189103] secure_update_simlock ret = 0
(bootloader) [189485] final simlock 0
(bootloader) [190032] secure_set_simlock ret = 0
(bootloader) [190606] TZ_HTC_SVC_ENC ret = 0
(bootloader) [199251] msm_rpm_init: RPM firmware 3.0.16847202
(bootloader) [199291] MPM_SLEEP_TICK: llums
(bootloader) [199317] [SYSINFO] DDR - Hynix
(bootloader) [199347] [SYSINFO] PVS - Krait:3 Q6:Nom VDDCX:Slow
(bootloader) [199371] [SYSINFO] Vdd_dig - 0.5v
(bootloader) [199396] hw_ver_id is 207150E1
(bootloader) [199419] speed_bin is 1
(bootloader) [199447] 0x207150E1 CPU-1.7G PMIC-v3.0
(bootloader) [199468] [SYSINFO] 0x207150E1 CPU-1.7G PMIC-v3.0
(bootloader) [199488] [SYSINFO] PMIC version
(bootloader) [199514] PMIC revision 1: F4
(bootloader) [199539] PMIC revision 2: 6
(bootloader) [199560] pm8921_check_revision: *revision = 6F4
(bootloader) [199580] [SYSINFO] End PMIC version[199604]
(bootloader) Manufacturer ID, MID=90
(bootloader) [199626] [SYSINFO] eMMC: Hynix 61079551 sectors 29823 MB
(bootloader) [199648] [SYSINFO] eMMC-CID: 90014A48 12345678 401072A 2AF30
(bootloader) FA
(bootloader) [200761] [FAT_ERROR] fat_open_file: can not find RADIOVER.CF
(bootloader) G
(bootloader) [200794] No RADIOVER.CFG in radio image for WSD version!
(bootloader) [201536] [FAT_ERROR] No M$-DOS partition found
(bootloader) [201558] [FAT_ERROR] fat_open_file: load bpb fail(-22)
(bootloader) [201590] No OPENDSPVER.CFG in adsp image for SSD version!
(bootloader) [202177] [SYSINFO] SBL1: 1.010.30.A4
(bootloader) [202584] [SYSINFO] SBL2: 1.010.30.A3
(bootloader) [203039] [SYSINFO] SBL3: 1.010.30.A1
(bootloader) [203427] [SYSINFO] TZ: 1.010.30.45
(bootloader) [203446] 3.0.98.17
(bootloader) [203466] [SYSINFO] RPM: 3.0.98.17
(bootloader) [221240] pm8921_vreg_disable function, vreg_id = 27
(bootloader) [221264] pm8921_vreg_disable function, vreg_id = 34
(bootloader) [221290] pm8921_vreg_disable function, vreg_id = 35
(bootloader) [221312] pm8921_vreg_disable function, vreg_id = 9
(bootloader) [221335] [ADC] read adc channel VBAT(1):
(bootloader) [221356] pm8921_adc_calib_device start
(bootloader) [238476] pm8921_adc_calib_device end
(bootloader) [248559] [ADC] adc_code = 0x93F2, physical=3850 mV
(bootloader) [248583] [BATT] setting_check_perflock_allowance: vol_curr=3
(bootloader) 850 mV vol_limit=3550 mV
(bootloader) [248739] [THERMAL]tsens_init: Tsens init done
(bootloader) [249763] msm_thermal: CPU0 temperature is 44 C
(bootloader) [249786] [INFO][ACPU] get_pvs: ACPU PVS: Fast
(bootloader) [249810] [INFO][ACPU] acpuclk_8064_init: Max ACPU freq: 1512
(bootloader) 000 KHz
(bootloader) [249865] [DEBUG][ACPU] hfpll_init: Initializing HFPLL4
(bootloader) [249893] [WARNING][ACPU] hfpll_enable: This regulator hfpll_
(bootloader) l2 (40) is LVS type, APPS cannot control it.
(bootloader) [250001] [DEBUG][ACPU] hfpll_init: Initializing HFPLL0
(bootloader) [250058] [WARNING][ACPU] hfpll_enable: This regulator hfpll0
(bootloader) (40) is LVS type, APPS cannot control it.
(bootloader) [250182] [INFO][ACPU] acpuclk_set_rate: Set cpu0 rate to 918
(bootloader) 000
(bootloader) [250199] [DEBUG][ACPU] acpuclk_8064_set_rate: Switching from
(bootloader) ACPU0 rate 1512000 KHz -> 918000 KHz
(bootloader) [250451] [DEBUG][ACPU] acpuclk_8064_set_rate: ACPU0 speed ch
(bootloader) ange complete
(bootloader) [250473] [INFO][ACPU] acpuclk_set_rate: Set cpu0 rate to 151
(bootloader) 2000
(bootloader) [250514] [DEBUG][ACPU] acpuclk_8064_set_rate: Switching from
(bootloader) ACPU0 rate 918000 KHz -> 1512000 KHz
(bootloader) [250752] [DEBUG][ACPU] acpuclk_8064_set_rate: ACPU0 speed ch
(bootloader) ange complete
(bootloader) [250766] Enable hboot boot time perflock
(bootloader) [604126] --pm_check_power_on_status--[609262] pm8921_vreg_di
(bootloader) sable function, vreg_id = 19
(bootloader) [613042] pm8921_vreg_disable function, vreg_id = 24
(bootloader) [615964] m7_vreg_init: enable lvs2 for XB
(bootloader) [628737] pm8921_vreg_disable function, vreg_id = 16
(bootloader) [634494] start block/size of [dzsystem] is different to [sys
(bootloader) tem]. Sync it.
(bootloader) [638704] dzsystem: start block = 1310721; size = 3801086
(bootloader) [639736] Update EBR
(bootloader) [656215] pm8921_vreg_disable function, vreg_id = 15
(bootloader) [659995] pm8921_vreg_disable function, vreg_id = 17
(bootloader) [663776] pm8921_vreg_disable function, vreg_id = 14
(bootloader) [676724] pm8921_vreg_disable function, vreg_id = 13
(bootloader) [888488] PMIC pm8921_fix_charger_lockup
(bootloader) [891324] [ADC] read adc channel VBAT(1):
(bootloader) [904408] [ADC] adc_code = 0x93BF, physical=3835 mV
(bootloader) [908360] [BATT] batt_vol=3835 mV current=590 mA FSM=3
(bootloader) [912055] PMIC PMIC charger init by user parameters
(bootloader) [913860] PMIC revision 1: F4
(bootloader) [915578] PMIC revision 2: 6
(bootloader) [920648] PMIC Restart Reason: Triggered from KPD (power key
(bootloader) press)
(bootloader) [923397] PMIC [Batt]pm_chg_failed_clear
(bootloader) [928897] PMIC [Batt] pm8921_chg_hw_init: FSM=3 after clear c
(bootloader) hg fail bit
(bootloader) [931389] PMIC PMIC charger init done
(bootloader) [933623] [BATT]3 cells initiated.
(bootloader) [937919] [PMIC-BMS]r_sense=10 temp_channel=8 id_channel=9
(bootloader) [941012] [ADC] read adc channel BATT_ID(9):
(bootloader) [954010] [ADC] adc_code = 0x7025, physical=391 mV
(bootloader) [957104] [BATT][ERR]: cur_cell is initiated
(bootloader) [961056] [PMIC-BMS] set bms_battery_data (cell_id=1).
(bootloader) [983613] [PMIC-BMS]BMS init OK -- ocv = 3849000
(bootloader) [989628] [PMIC-BMS]pm8921_bms_read_ocv_updated_flag: OCV_UPD
(bootloader) ATE_STORAGE = 0x0
(bootloader) [996588] radio_is_boot_from_shutdown(): 0, reset_reason=0x77
(bootloader) 665501, hw_reason=0x00000000
(bootloader) [999939] [ADC] read adc channel BATT_THERM(8):
(bootloader) [1012852] [ADC] adc_code = 0x7DA0, physical=36 mV
(bootloader) [1015687] [ADC] read adc channel VBAT(1):
(bootloader) [1028772] [ADC] adc_code = 0x93BF, physical=3835 mV
(bootloader) [1031865] [ADC] read adc channel BATT_ID(9):
(bootloader) [1044863] [ADC] adc_code = 0x7025, physical=391 mV
(bootloader) [1048214] [ADC] read adc channel BATT_THERM(8):
(bootloader) [1061126] [ADC] adc_code = 0x7DA1, physical=36 mV
(bootloader) [1074059] [PMIC-BMS]P=56, adc_based_ocv=3875088, T=36
(bootloader) [1079473] [BATT] V=3835 mV, T=36 C, OCV=3849 mV, ID=391 mV,
(bootloader) P=56, FSM=3
(bootloader) [1087378] radio_boot_mode() poweron_status=0x00000001, reset
(bootloader) _reason=0x77665501, hw_reason=0x00000000
(bootloader) [1188224] E0902910 E0902E20
(bootloader) [1279369] usb_init_hw: pull up d+
(bootloader) [1710085] m7_set_charging(1)
(bootloader) [1711631] m7_hw_reset_nfc
(bootloader) [1885962] m7_init_display
(bootloader) [1889579] m7_init_display ID LCD_ID0=20 LCD_ID1=43
(bootloader) [1892448] m7_init_display ID id0=0 id1=0
(bootloader) [1899185] m7_init_display_panelid_940065
(bootloader) [1901505] JDI_SAMSUNG FULL HD panel
(bootloader) [1918935] mdp_clock_init
(bootloader) [1940472] mipi_read_back:0 0x21000012
(bootloader) [1952967] mipi_read_back:0 0x21030014
(bootloader) [1965462] mipi_read_back:0 0x21040031
(bootloader) [1969329] id1= 0x120000, id2= 0x140003, id3= 0x310004
(bootloader) [1973625] PANEL_ID_M7_JDI_SAMSUNG_C2_2, panel ID=0x6940065
(bootloader) [1975515] mipi_dsi_cmds_tx_ext
(bootloader) [2113912] [CIR] m7_init_cir, enter.
(bootloader) [2116060] [CIR] m7_init_cir, end.
(bootloader) [2120013] chipset_bootmode(): reset_reason=0x77665501
(bootloader) [2121473] Board_PID : 203
(bootloader) [2126787] [FAT_ERROR] fat_open_file: can not find MDATA.CFG
(bootloader) [2128076] No MDATA.CFG
(bootloader) [2129846] Gyro ID = 0xA6
(bootloader) [2131615] Gyro ID = 0xD4
(bootloader) [2133419] Setting gy_type = 2
(bootloader) [2137200] m7_init is finished: 20:19:39, Jun 21 2013
(bootloader) [2153478] TZ_HTC_SVC_ENC ret = 0
(bootloader) [2155540] TZ_HTC_SVC_ENC ret = 0
(bootloader) [2157688] valid keybox is existed
(bootloader) [2173219] TZ_HTC_SVC_ENC ret = 0
(bootloader) [2189745] TZ_HTC_SVC_ENC ret = 0
(bootloader) [2201058] radio_update_drm_config: read pg2fs_dapkey len (0)
(bootloader) failed
(bootloader) [2216696] Start Verify: 0
(bootloader) [2268650] [INFO][ACPU] acpuclk_set_rate: Set cpu0 rate to 91
(bootloader) 8000
(bootloader) [2276384] [DEBUG][ACPU] acpuclk_8064_set_rate: Switching fro
(bootloader) m ACPU0 rate 1512000 KHz -> 918000 KHz
(bootloader) [2282055] [DEBUG][ACPU] acpuclk_8064_set_rate: ACPU0 speed c
(bootloader) hange complete
(bootloader) [2284977] Disable hboot boot time perflock
(bootloader) [2286695] ARM11 Boot Mode: 2
(bootloader) [2288585] Platform: HBOOT-8064
(bootloader) [2529537] m7_init_backlight
(bootloader) [2532177] PWM ic version A2
(bootloader) [2640554] mipi_dsi_cmds_tx_ext
(bootloader) [2642994] usb_Vbus 0
(bootloader) [2743631] E0902910 E0902E20
(bootloader) [2834871] usb_init_hw: pull low d+
(bootloader) [2866280] usb_check_vbus: pull up d+
(bootloader) [2868600]
(bootloader) ###[ Fastboot Mode ]###
(bootloader) [2872552] chipset_bootmode(): reset_reason=0x77665501
(bootloader) [2874185]
(bootloader) USB_STS_SUSPEND
(bootloader) [2875904] m7_set_charging(1)
(bootloader) [2973606]
(bootloader) USB_STS_RESET
(bootloader) [3058033] usb_setup:DEVICE_WRITE:SET_CONFIGURATION:1
(bootloader) [3901610] fastboot_command:[oem dmesg]
(bootloader) [3903157] fb_cmd_oem:dmesg
(bootloader) [3907453] register_debug_console: new entry ptr=0x82600000
OKAY [ 0.672s]
finished. total time: 0.672s
with the main error lines being
Code:
(bootloader) [200761] [FAT_ERROR] fat_open_file: can not find RADIOVER.CF
(bootloader) G
(bootloader) [200794] No RADIOVER.CFG in radio image for WSD version!
(bootloader) [201536] [FAT_ERROR] No M$-DOS partition found
(bootloader) [201558] [FAT_ERROR] fat_open_file: load bpb fail(-22)
(bootloader) [201590] No OPENDSPVER.CFG in adsp image for SSD version!
and
(bootloader) [2126787] [FAT_ERROR] fat_open_file: can not find MDATA.CFG
(bootloader) [2128076] No MDATA.CFG
I flashed twrp 2.6.3.3 and this is the first log that I get
Code:
Updating partition details
E: Unable to mount ' /system'
without mountable data (shows 0mb). If I format it with twrp, the free available storage in the data partition will go up to (619mb), which is not enough to allow me to push roms or perform nandroid restore.
Is this a hardware problem? are these partitions that the RUU does not address? Can you please help?
Bumping this again, it has been a few days with no response.
Any fellow xda-members able to help here? If it is hopeless, at lease let me know to abandon the device..
Thank you
brainymd said:
Bumping this again, it has been a few days with no response.
Any fellow xda-members able to help here? If it is hopeless, at lease let me know to abandon the device..
Thank you
Click to expand...
Click to collapse
I think nkk71 already explained your situation pretty well.... "this honestly sounds like a hardware problem"
A RUU should fix every software / firmware issues, you already tried and your phone still refuse to boot which also makes me believe its an hardware problem.
Have you tried other RUU? Change your cid / mid and lets try the 1.28.401.7 ruu.zip
@alray
Thank you for the reply.
I am assuming you mean the EUROPE RUU.
If so, I should change MID to PN0710000 and CID to HTC__001, is that correct?
If so, I will try that and report back.
I've been trying to get my htc one m7 back to a stock ruu so I can update normaly, last thing I did was fastboot flash an image and after rebooting I got htc updating applications and now all it does is get stuck on the Htc One white boot screen, all I can do right now is press power+voldown then hold voldown to go to the bootloader, I tried Recovery and Factory reset options in bootloader but it doesn't change anything...
here's what bootloader shows :
Tampered
Unlocked
M7_UL PVT SHIP S-ON RH
HBOOT-1.44.0000
RADIO-4A.14.3250.13
OpenDSP-v26.120.274.0202
eMMC-boot
Mar 21 2013
thanks for the help
MarcAnt said:
I've been trying to get my htc one m7 back to a stock ruu so I can update normaly, last thing I did was fastboot flash an image and after rebooting I got htc updating applications and now all it does is get stuck on the Htc One white boot screen, all I can do right now is press power+voldown then hold voldown to go to the bootloader, I tried Recovery and Factory reset options in bootloader but it doesn't change anything...
here's what bootloader shows :
Tampered
Unlocked
M7_UL PVT SHIP S-ON RH
HBOOT-1.44.0000
RADIO-4A.14.3250.13
OpenDSP-v26.120.274.0202
eMMC-boot
Mar 21 2013
thanks for the help
Click to expand...
Click to collapse
-what file exactly?
-post the output of "fastboot getvar all"
Sent from my HTC One using XDA Labs
alray said:
-what file exactly?
-post the output of "fastboot getvar all"
Sent from my HTC One using XDA Labs
Click to expand...
Click to collapse
fastboot getvar all :
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.661.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT349W901572
(bootloader) imei: 354439054793130
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: TELUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4239mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-5d8b0f7651bb88c960f701ae91477674a
getvar:all FAILED (unknown status code)
finished. total time: 0.069s
MarcAnt said:
fastboot getvar all :
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.661.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT349W901572
(bootloader) imei: 354439054793130
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: TELUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4239mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-5d8b0f7651bb88c960f701ae91477674a
getvar:all FAILED (unknown status code)
finished. total time: 0.069s
Click to expand...
Click to collapse
You could restore this backup using TWRP
You should also consider S-OFF since your phone is still running to old hboot
alray said:
You could restore this backup using TWRP
You should also consider S-OFF since your phone is still running to old hboot
Click to expand...
Click to collapse
Ok, I've tried firewater to S-OFF but it never worked,
twrp works but can I restore using the .rar file or do I need to extract before I push it to my phone ?
thanks for the help
MarcAnt said:
Ok, I've tried firewater to S-OFF but it never worked,
twrp works but can I restore using the .rar file or do I need to extract before I push it to my phone ?
thanks for the help
Click to expand...
Click to collapse
Firewater is discontinued, revone or moonshine should work on hboot 1.44
To restore the backup, boot in twrp, go in the backup menu and make a backup of your boot partition (this is only to generate a backup path on your phone). Then navigate to /sdcard/TWRP/BACKUPS/"your serial number"/ "date of backup" and deleted all files there (your boot partition backup). Extract the downloaded backup and put all files in that folder ( /sdcard/TWRP/BACKUPS/"your serial number"/ "date of backup" ), go back to twrp main menu, select "restore" and select the backup to restore, choose all partition available and finally "swipe to restore".
alray said:
Firewater is discontinued, revone or moonshine should work on hboot 1.44
To restore the backup, boot in twrp, go in the backup menu and make a backup of your boot partition (this is only to generate a backup path on your phone). Then navigate to /sdcard/TWRP/BACKUPS/"your serial number"/ "date of backup" and deleted all files there (your boot partition backup). Extract the downloaded backup and put all files in that folder ( /sdcard/TWRP/BACKUPS/"your serial number"/ "date of backup" ), go back to twrp main menu, select "restore" and select the backup to restore, choose all partition available and finally "swipe to restore".
Click to expand...
Click to collapse
It worked! thanks alot for the help, is there a way I can remove TWRP now, I tried doing the Htc update but when I reboot it goes to twrp menu
MarcAnt said:
It worked! thanks alot for the help, is there a way I can remove TWRP now, I tried doing the Htc update but when I reboot it goes to twrp menu
Click to expand...
Click to collapse
Here is the stock recovery for your version, download and save it in your adb/fastboot folder
https://www.androidfilehost.com/?fid=24572369242688360
Code:
fastboot flash recovery stock_recovery_1.29.661.5.img
fastboot erase cache
fastboot reboot
alray said:
Here is the stock recovery for your version, download and save it in your adb/fastboot folder
https://www.androidfilehost.com/?fid=24572369242688360
Code:
fastboot flash recovery stock_recovery_1.29.661.5.img
fastboot erase cache
fastboot reboot
Click to expand...
Click to collapse
done, then I tried to install OTA update but after reboot it looks stuck at about 25% of the progress bar maybe I just need to wait longer
edit : nvm I turn'd it off and on then the update completed but now it seems stuck at 100% -.-
MarcAnt said:
done, then I tried to install OTA update but after reboot it looks stuck at about 25% of the progress bar maybe I just need to wait longer
Click to expand...
Click to collapse
you should get a fail message if it can't update. While in stock recovery you can hold the vol up butoon and click power to see the detailed installation progress (in yellow at the bottom of the screen).
alray said:
you should get a fail message if it can't update. While in stock recovery you can hold the vol up butoon and click power to see the detailed installation progress (in yellow at the bottom of the screen).
Click to expand...
Click to collapse
Ok it is now stuck at 100%, in detailed installation its at Running bug_fix2 tool... hopefully it completes or I'll just force shutdown and try again
Edit : rebooted again and it completed yay!
MarcAnt said:
Ok it is now stuck at 100%, in detailed installation its at Running bug_fix2 tool... hopefully it completes or I'll just force shutdown and try again
Edit : rebooted again and it completed yay!
Click to expand...
Click to collapse
Good, so theres only about 12 updates left to be on the latest version
Sent from my HTC One using XDA Labs
Hi, i need help with an HTC One Mini, i know this isn't the forum but no one helped me there.
My HTC One Mini ,my phone was in a box for like 2 months, and then i decide to turn it on again, and i faced this problem. the device is VERY stuck in bootloader, NOT the boot screen, only bootloader. I can't enter recovery, and the ADB isn't recognizing the device. I'm kinda desesperate because i'm running out of ideas and my device is unusable. The phone is bootloader unlocked, and i can't lock it to flash a RUU because ADB is not recognizing it. Please help, I really appreciate any help you can provide.
Little Snevil said:
the device is VERY stuck in bootloader, NOT the boot screen, only bootloader. I can't enter recovery, and the ADB isn't recognizing the device.
Click to expand...
Click to collapse
ADB will not work from bootloader mode, only FASTBOOT will.
I'm kinda desesperate because i'm running out of ideas and my device is unusable. The phone is bootloader unlocked, and i can't lock it to flash a RUU because ADB is not recognizing it. Please help, I really appreciate any help you can provide.
Click to expand...
Click to collapse
Not sure if there's really a problem with your phone or you're simply not using the right commands since you are talking about ADB. Only fastboot commands will work when in bootloader mode, not ADB commands. ALso make sure that your phone is in "fastboot usb" mode when using fastboot commands (you'll see a red "fastboot usb" caption on the bootloader screen). Post the output of "fastboot getvar all" (hide your imei and serialno).
If you can't get the red "fastboot usb" and fastboot commands aren't working, check that your are using a good usb cable, try another usb port (use usb 2.0 only directly on your computer - no external HUB). Make sure you have the latest HTC drivers installed on your computer and that HTC Sync is NOT installed.
alray said:
ADB will not work from bootloader mode, only FASTBOOT will.
Not sure if there's really a problem with your phone or you're simply not using the right commands since you are talking about ADB. Only fastboot commands will work when in bootloader mode, not ADB commands. ALso make sure that your phone is in "fastboot usb" mode when using fastboot commands (you'll see a red "fastboot usb" caption on the bootloader screen). Post the output of "fastboot getvar all" (hide your imei and serialno).
If you can't get the red "fastboot usb" and fastboot commands aren't working, check that your are using a good usb cable, try another usb port (use usb 2.0 only directly on your computer - no external HUB). Make sure you have the latest HTC drivers installed on your computer and that HTC Sync is NOT installed.
Click to expand...
Click to collapse
Ok, my bad, i was talking about fastboot, not bootloader. sorry lol.
And yeah, i have the lastest drivers, and when i'm in FASTBOOT USB i type ADB devices and i get nothing, and when i try to lock bootloader with fastboot oem lock it gave me an error.
Okay, this is the getvar.
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.22.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.09.709.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HTxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxx
(bootloader) meid:
(bootloader) product: m4_u
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PO5810000
(bootloader) cidnum: HTC__621
(bootloader) battery-status: good
(bootloader) battery-voltage: 4283mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e1af350
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Little Snevil said:
And yeah, i have the lastest drivers, and when i'm in FASTBOOT USB i type ADB devices and i get nothing
Click to expand...
Click to collapse
I'll ask you one question Does "adb devices" sounds like an ADB command or a FASTBOOT command? If the command starts with "adb" then there are really high chances that your command is an ADB command... ADB commands, like said in my previous post, does not work from bootloader mode, only FASTBOOT commands will. The correct command to confirm device connectivity when in bootloader mode is "fastboot devices" and since you can get the output of "fastboot getvar all" your phone is for sure correctly recognized from your computer.
when i try to lock bootloader with fastboot oem lock it gave me an error
Click to expand...
Click to collapse
What is the error? Post a screenshot of your command window if needed.
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.22.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.09.709.4
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HTxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxx
(bootloader) meid:
(bootloader) product: m4_u
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PO5810000
(bootloader) cidnum: HTC__621
(bootloader) battery-status: good
(bootloader) battery-voltage: 4283mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e1af350
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
What RUU version are you going to flash?
alray said:
I'll ask you one question Does "adb devices" sounds like an ADB command or a FASTBOOT command? If the command starts with "adb" then there are really high chances that your command is an ADB command... ADB commands, like said in my previous post, does not work from bootloader mode, only FASTBOOT commands will. The correct command to confirm device connectivity when in bootloader mode is "fastboot devices" and since you can get the output of "fastboot getvar all" your phone is for sure correctly recognized from your computer.
Click to expand...
Click to collapse
Ok, you are an angel. You are right, i was wrong this whole time! when i type "fastboot devices" i can see now my phone connected! :laugh: THANK YOU
alray said:
What is the error? Post a screenshot of your command window if needed.
Click to expand...
Click to collapse
i'll attach you the pic down here.
alray said:
What RUU version are you going to flash?
Click to expand...
Click to collapse
it's newer than my phone's version, it's 4.13.502.5.
Little Snevil said:
i'll attach you the pic down here.
Click to expand...
Click to collapse
SD_HWR_ERRORs are really bad news.... could be a sign of a fried EMMC
can your post the output of "fastboot oem dmesg" and "fastboot oem last_dmesg"
Can you also try the "fastboot oem rebootRUU" command and tell me if the phone correctly reboot in ruu mode (a black screen with silver htc logo) or if its rebooting in bootloader?
it's newer than my phone's version, it's 4.13.502.5.
Click to expand...
Click to collapse
This RUU will not work on your phone. .502 base are for AT&T phone with CWS__001 CID.
WIth S-ON and your actual CID your must stick with .709 base i.e: must be x.xx.709.x where "x" is equal or newer than your actual version.
alray said:
SD_HWR_ERRORs are really bad news.... could be a sign of a fried EMMC
can your post the output of "fastboot oem dmesg" and "fastboot oem last_dmesg"
Click to expand...
Click to collapse
Okay, is this?
(bootloader) [22:57:6.121354] pm8038_set_voltage function, vreg_id = 7
(bootloader) [22:57:6.124963] pm8038_set_voltage function, vreg_id = 8
(bootloader) [22:57:6.128572] pm8038_set_voltage function, vreg_id = 9
(bootloader) [22:57:6.132266] pm8038_set_voltage function, vreg_id = 10
(bootloader) [22:57:6.135961] pm8038_set_voltage function, vreg_id = 11
(bootloader) [22:57:6.139656] pm8038_set_voltage function, vreg_id = 13
(bootloader) [22:57:6.143351] pm8038_set_voltage function, vreg_id = 14
(bootloader) [22:57:6.147046] pm8038_set_voltage function, vreg_id = 15
(bootloader) [22:57:6.150741] pm8038_set_voltage function, vreg_id = 16
(bootloader) [22:57:6.154435] pm8038_set_voltage function, vreg_id = 17
(bootloader) [22:57:6.158130] pm8038_set_voltage function, vreg_id = 18
(bootloader) [22:57:6.161825] pm8038_set_voltage function, vreg_id = 20
(bootloader) [22:57:6.165520] pm8038_set_voltage function, vreg_id = 21
(bootloader) [22:57:6.169214] pm8038_set_voltage function, vreg_id = 22
(bootloader) [22:57:6.172909] pm8038_set_voltage function, vreg_id = 23
(bootloader) [22:57:6.176604] pm8038_set_voltage function, vreg_id = 25
(bootloader) [22:57:6.180299] pm8038_set_voltage function, vreg_id = 26
(bootloader) [22:57:6.183994] pm8038_set_voltage function, vreg_id = 27
(bootloader) [22:57:6.187689] pm8038_set_voltage function, vreg_id = 28
(bootloader) [22:57:6.191384] pm8038_set_voltage function, vreg_id = 29
(bootloader) [22:57:6.195078] pm8038_set_voltage function, vreg_id = 30
(bootloader) [22:57:6.198773] pm8038_set_voltage function, vreg_id = 31
(bootloader) [22:57:6.202468] pm8038_set_voltage function, vreg_id = 32
(bootloader) [22:57:6.203499] Update EBR
(bootloader) [22:57:6.213014] PMIC revision 1: F2
(bootloader) [22:57:6.214732] PMIC revision 2: 9
(bootloader) [22:57:6.216880] PM8038 version: 0x9F2
(bootloader) [22:57:6.224483] pm8038_set_voltage function, vreg_id = 8
(bootloader) [22:57:6.228178] pm8038_vreg_disable function, vreg_id = 8
(bootloader) [22:57:6.231959] pm8038_vreg_disable function, vreg_id = 34
(bootloader) [22:57:6.244557] pm8038_vreg_enable function, vreg_id = 8
(bootloader) [22:57:6.248252] pm8038_vreg_enable function, vreg_id = 34
(bootloader) [22:57:6.250830] m4_sensor_power_init: Done!!
(bootloader) [22:57:6.282591] PMIC pm8921_fix_charger_lockup
(bootloader) [22:57:6.285426] [ADC] read adc channel VBAT(1):
(bootloader) [22:57:6.288090] pm8921_adc_calib_device start
(bootloader) [22:57:6.306670] pm8921_adc_calib_device end
(bootloader) [22:57:6.319757] [ADC] adc_code = 0x984E, physical=4194
(bootloader) mV
(bootloader) [22:57:6.323710] [BATT] batt_vol=4194 mV current=174 mA FSM=
(bootloader) 3
(bootloader) [22:57:6.327404] PMIC PMIC charger init by user parameters
(bootloader) [22:57:6.329209] PMIC revision 1: F2
(bootloader) [22:57:6.330927] PMIC revision 2: 9
(bootloader) [22:57:6.336513] PMIC Restart Reason: Triggered from CHG (us
(bootloader) b charger insertion)
(bootloader) [22:57:6.339262] PMIC [Batt]pm_chg_failed_clear
(bootloader) [22:57:6.344761] PMIC [Batt] pm8921_chg_hw_init: FSM=3 after
(bootloader) clear chg fail bit
(bootloader) [22:57:6.347253] PMIC PMIC charger init done
(bootloader) [22:57:6.349487] [BATT]3 cells initiated.
(bootloader) [22:57:6.353784] [PMIC-BMS]r_sense=10 temp_channel=8 id_chan
(bootloader) nel=9
(bootloader) [22:57:6.356877] [ADC] read adc channel BATT_ID(9):
(bootloader) [22:57:6.369878] [ADC] adc_code = 0x65D2, physical=132 m
(bootloader) V
(bootloader) [22:57:6.372542] [BATT]: cur_cell is initiated
(bootloader) [22:57:6.376495] [PMIC-BMS] set bms_battery_data (cell_id=1)
(bootloader) .
(bootloader) [22:57:6.399062] [PMIC-BMS]BMS init OK -- ocv = 4221000
(bootloader) [22:57:6.405163] [PMIC-BMS]pm8921_bms_read_ocv_updated_flag:
(bootloader) OCV_UPDATE_STORAGE = 0xA0
(bootloader) [22:57:6.410490] [PMIC-BMS]pm8921_bms_get_ocv_flag: OCV_UPDA
(bootloader) TE_STORAGE = 0xA0
(bootloader) [22:57:6.419599] radio_is_boot_from_shutdown(): 1, reset_rea
(bootloader) son=0x5EA3E3BF, hw_reason=0x00000000, ocv_hw_reset=0x0000000
(bootloader) 0
(bootloader) [22:57:6.424926] [PMIC-BMS]pm8921_bms_set_ocv_flag: OCV_UPDA
(bootloader) TE_STORAGE = 0xA0
(bootloader) [22:57:6.428277] [ADC] read adc channel BATT_THERM(8):
(bootloader) [22:57:6.441193] [ADC] adc_code = 0x8DF1, physical=15 mV
(bootloader) [22:57:6.444028] [ADC] read adc channel VBAT(1):
(bootloader) [22:57:6.457117] [ADC] adc_code = 0x984A, physical=4193
(bootloader) mV
(bootloader) [22:57:6.460210] [ADC] read adc channel BATT_ID(9):
(bootloader) [22:57:6.473209] [ADC] adc_code = 0x65CF, physical=131 m
(bootloader) V
(bootloader) [22:57:6.476560] [ADC] read adc channel BATT_THERM(8):
(bootloader) [22:57:6.489476] [ADC] adc_code = 0x8DF0, physical=15 mV
(bootloader) [22:57:6.502415] [PMIC-BMS]P=93, adc_based_ocv=4217272, T=15
(bootloader) [22:57:6.508688] [BATT] V=4193 mV, T=15 C, OCV=4221 mV, ID=1
(bootloader) 31 mV, I=177 mA, P=93, FSM=3
(bootloader) [22:57:6.516593] radio_boot_mode() poweron_status=0x00000020
(bootloader) , reset_reason=0x5EA3E3BF, hw_reason=0x00000000
(bootloader) [22:57:6.617197] 902910 902E20
(bootloader) [22:57:6.708344] usb_init_hw: pull up d+
(bootloader) [22:57:6.802503] m4_panel_detect: MSM_LCD_ID0=0, MSM_LCD_ID1
(bootloader) =0
(bootloader) [22:57:6.806198] pm8038_vreg_disable function, vreg_id = 9
(bootloader) [22:57:6.839797] pm8038_vreg_enable function, vreg_id = 9
(bootloader) [22:57:6.854400] pm8038_vreg_enable function, vreg_id = 1
(bootloader) [22:57:6.884954] m4_init_display: Panel ID=0x940076, type=KI
(bootloader) WI_SHARP
(bootloader) [22:57:6.896176] Check panel_id = 9699446
(bootloader) [22:57:6.897551] mdp_clock_init
(bootloader) [22:57:6.899614] m4_init_display: done!
(bootloader) [22:57:6.936471] mipi_read_back:0 0x1C04
(bootloader) [22:57:6.938791] mipi_read_back:1 0x330000
(bootloader) [22:57:6.941283] mipi_read_back:2 0x53000000
(bootloader) [22:57:6.943861] read_display_id id= 0x530000
(bootloader) [22:57:6.945751] display_id =0x530000
(bootloader) [22:57:6.947212] display_id =0x0
(bootloader) [22:57:6.948844] display_id3 =0x53
(bootloader) [22:57:6.949961] SHARP panel
(bootloader) [22:57:7.370100] Init done!
(bootloader) [22:57:7.480838] m4_init_backlight
(bootloader) [22:57:7.592577] pmic8038_led_test!
(bootloader) [22:57:7.692955] 902910 902E20
(bootloader) [22:57:7.784101] usb_init_hw: pull up d+
(bootloader) [22:57:7.817077] chipset_bootmode(): reset_reason=0x5EA3E3BF
(bootloader) [22:57:7.818538] Board_PID : 232
(bootloader) [22:57:9.187300] [SD_HW_ERR] read data fail in CMD18
(bootloader) [22:57:9.190050] CMD18: read fifo failed, retry
(bootloader) [22:57:10.233903] [SD_HW_ERR] read data fail in CMD18
(bootloader) [22:57:10.236825] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:10.238629] PMIC revision 1: F2
(bootloader) [22:57:10.240348] PMIC revision 2: 9
(bootloader) [22:57:10.243785] MSM?-p?-v1.2(0x2075B0E1) PMIC8038-v2.0
(bootloader) [22:57:10.245564] Gyro ID = 0x69
(bootloader) [22:57:10.247368] Setting gy_type = 1
(bootloader) [22:57:10.251378] reset rt5501 ret 0
(bootloader) [22:57:10.255159] m4_init is finished: 19:49:13, Aug 13 2015
(bootloader) [22:57:10.267861] board_m4 support widevine level 1
(bootloader) [22:57:10.280159] [ERR] Cmd18 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:10.284627] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:10.287806] [SD_HW_ERR] read data fail in CMD18
(bootloader) [22:57:10.289439] CMD18: cmd failed
(bootloader) [22:57:10.292361] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:10.295024] [PG_ERROR] htc_pg_hdr_get(117):[22:57:10.2
(bootloader) 97001] sd_read_sector error
(bootloader) [22:57:10.300094] [PG_ERROR] htc_pg_part_hdr_get(169):[22:57
(bootloader) :10.302156] htc_pg_hdr_get failed
(bootloader) [22:57:10.307484] radio_update_drm_config: read pg2fs_wvkey_
(bootloader) lv1 len (0) failed
(bootloader) [22:57:10.309975] valid keybox is not existed
(bootloader) [22:57:10.323601] [ERR] Cmd18 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:10.328069] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:10.331248] [SD_HW_ERR] read data fail in CMD18
(bootloader) [22:57:10.332881] CMD18: cmd failed
(bootloader) [22:57:10.335803] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:10.338466] [PG_ERROR] htc_pg_hdr_get(117):[22:57:10.3
(bootloader) 40443] sd_read_sector error
(bootloader) [22:57:10.343536] [PG_ERROR] htc_pg_part_hdr_get(169):[22:57
(bootloader) :10.345598] htc_pg_hdr_get failed
(bootloader) [22:57:10.350582] radio_update_drm_config: read pg2fs_dpkey
(bootloader) len (0) failed
(bootloader) [22:57:10.362879] [ERR] Cmd18 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:10.367347] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:10.370526] [SD_HW_ERR] read data fail in CMD18
(bootloader) [22:57:10.372159] CMD18: cmd failed
(bootloader) [22:57:10.375080] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:10.377744] [PG_ERROR] htc_pg_hdr_get(117):[22:57:10.3
(bootloader) 79721] sd_read_sector error
(bootloader) [22:57:10.382814] [PG_ERROR] htc_pg_part_hdr_get(169):[22:57
(bootloader) :10.384876] htc_pg_hdr_get failed
(bootloader) [22:57:10.389860] radio_update_drm_config: read pg2fs_prkey
(bootloader) len (0) failed
(bootloader) [22:57:10.402111] [ERR] Cmd18 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:10.406579] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:10.409758] [SD_HW_ERR] read data fail in CMD18
(bootloader) [22:57:10.411391] CMD18: cmd failed
(bootloader) [22:57:10.414312] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:10.416976] [PG_ERROR] htc_pg_hdr_get(117):[22:57:10.4
(bootloader) 18953] sd_read_sector error
(bootloader) [22:57:10.422046] [PG_ERROR] htc_pg_part_hdr_get(169):[22:57
(bootloader) :10.424108] htc_pg_hdr_get failed
(bootloader) [22:57:10.428834] radio_update_drm_config: read pg2fs_prkey
(bootloader) data failed
(bootloader) [22:57:10.442460] [ERR] Cmd18 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:10.446928] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:10.450108] [SD_HW_ERR] read data fail in CMD18
(bootloader) [22:57:10.451740] CMD18: cmd failed
(bootloader) [22:57:10.454662] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:10.457326] [PG_ERROR] htc_pg_hdr_get(117):[22:57:10.4
(bootloader) 59302] sd_read_sector error
(bootloader) [22:57:10.462395] [PG_ERROR] htc_pg_part_hdr_get(169):[22:57
(bootloader) :10.464457] htc_pg_hdr_get failed
(bootloader) [22:57:10.469269] isGDriveRedeemed: read pg2fs_gdvoucher_red
(bootloader) eemed failed
(bootloader) [22:57:10.473222] chipset_bootmode(): reset_reason=0x5EA3E3B
(bootloader) F
(bootloader) [22:57:10.481127] radio_boot_mode() poweron_status=0x0000002
(bootloader) 0, reset_reason=0x5EA3E3BF, hw_reason=0x00000000
(bootloader) [22:57:10.483877] enter recovery_offmod_charging
(bootloader) [22:57:10.486283] SecuritySDInit counter = 1
(bootloader) [22:57:10.490407] [SD_ERR] The project does not support SD c
(bootloader) ard
(bootloader) [22:57:10.491696] 902910 902E20
(bootloader) [22:57:10.704671] <0>No USB device attached, portsc 0x8C0010
(bootloader) 00
(bootloader) [22:57:10.706819] <1>usbhost_start failed
(bootloader) [22:57:10.807104] 902910 902E20
(bootloader) [22:57:10.898336] usb_init_hw: pull low d+
(bootloader) [22:57:10.930685] No smart SD in device disable detect
(bootloader) [22:57:10.933950] [JAVACARD_ERR] SD/USBDISK Init error
(bootloader) [22:57:10.935755] ARM11 Boot Mode: 22
(bootloader) [22:57:10.937645] Platform: HBOOT-8930
(bootloader) [22:57:10.969198] [ERR] Cmd17 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:10.973666] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:10.976845] [SD_HW_ERR] read data fail in CMD17
(bootloader) [22:57:10.978478] CMD17: cmd failed
(bootloader) [22:57:10.981399] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:10.984922] [ERR] partition_read_emmc(876): error 2
(bootloader) [22:57:10.996460] [ERR] Cmd17 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:11.000928] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:11.004107] [SD_HW_ERR] read data fail in CMD17
(bootloader) [22:57:11.005740] CMD17: cmd failed
(bootloader) [22:57:11.008661] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:11.012184] [ERR] partition_read_emmc(876): error 2
(bootloader) [22:57:11.016051] [ERR] Boot/Recovery image does not exist!!
(bootloader) !
(bootloader) [22:57:11.085061] [ERR] Cmd18 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:11.089529] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:11.092708] [SD_HW_ERR] read data fail in CMD18
(bootloader) [22:57:11.094341] CMD18: cmd failed
(bootloader) [22:57:11.097262] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:11.099926] [PG_ERROR] htc_pg_hdr_get(117):[22:57:11.1
(bootloader) 01903] sd_read_sector error
(bootloader) [22:57:11.104996] [PG_ERROR] htc_pg_part_hdr_get(169):[22:57
(bootloader) :11.107058] htc_pg_hdr_get failed
(bootloader) [22:57:11.119953] [ERR] Cmd17 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:11.124421] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:11.127600] [SD_HW_ERR] read data fail in CMD17
(bootloader) [22:57:11.129232] CMD17: cmd failed
(bootloader) [22:57:11.132154] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:11.136192] [FAT_ERROR] fat_open_file: load bpb fail(-
(bootloader) 5)
(bootloader) [22:57:11.140403] No RADIOVER.CFG in radio image for SSD ver
(bootloader) sion!
(bootloader) [22:57:11.152260] [ERR] Cmd17 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:11.156728] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:11.159907] [SD_HW_ERR] read data fail in CMD17
(bootloader) [22:57:11.161540] CMD17: cmd failed
(bootloader) [22:57:11.164461] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:11.168500] [FAT_ERROR] fat_open_file: load bpb fail(-
(bootloader) 5)
(bootloader) [22:57:11.172796] No OPENDSPVER.CFG in adsp image for SSD ve
(bootloader) rsion!
(bootloader) [22:57:11.326390] m4_init_backlight
(bootloader) [22:57:11.444752] m4_battery_stored_data_clean: magic_num=0,
(bootloader) stored_soc=0, stored_ocv=0, stored_cc=0, currtime=ld
(bootloader) [22:57:11.458320] [ERR] Cmd18 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:11.462788] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:11.465968] [SD_HW_ERR] read data fail in CMD18
(bootloader) [22:57:11.467600] CMD18: cmd failed
(bootloader) [22:57:11.470522] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:11.474044] [ERR] partition_read_emmc(876): error 2
(bootloader) [22:57:11.475505] Start Verify: 3
(bootloader) [22:57:11.487764] [ERR] Cmd25 polling status timed out, MCI_
(bootloader) STATUS: 0x4C0000
(bootloader) [22:57:11.492232] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:11.493349] usb_Vbus 0
(bootloader) [22:57:11.593633] 902910 902E20
(bootloader) [22:57:11.684779] usb_init_hw: pull up d+
(bootloader) [22:57:11.696093]
(bootloader) ###[ Fastboot Mode ]###
(bootloader) [22:57:11.700045] chipset_bootmode(): reset_reason=0x5EA3E3B
(bootloader) F
(bootloader) [22:57:11.701678]
(bootloader) USB_STS_SUSPEND
(bootloader) [22:57:11.791645]
(bootloader) USB_STS_RESET
(bootloader) [22:57:11.793735] USB_SPEED_HIGH
(bootloader) [22:57:11.866477] usb_setupEVICE_WRITE:SET_CONFIGURATION:1
(bootloader) [22:57:11.867938] Set usb_ats = 0
(bootloader) [22:58:50.814885] fastboot_command:[oem dmesg]
(bootloader) [22:58:50.816432] fb_cmd_oem:dmesg
(bootloader) [22:58:50.820728] register_debug_console: new entry ptr=0x90
(bootloader) 000940
(bootloader) [22:59:48.210992] fastboot_command:[oem dmesg]
(bootloader) [22:59:48.212539] fb_cmd_oem:dmesg
(bootloader) [22:59:48.216835] register_debug_console: new entry ptr=0x90
(bootloader) 000940
OKAY [ 1.468s]
finished. total time: 1.468s
And this?
C:\adb>fastboot oem last_dmesg
...
(bootloader) [0:0:0.000008] check_ramlog_region: Backup last hboot ramlog
(bootloader) .
OKAY [ 0.013s]
finished. total time: 0.013s
alray said:
Can you also try the "fastboot oem rebootRUU" command and tell me if the phone correctly reboot in ruu mode (a black screen with silver htc logo) or if its rebooting in bootloader?
Click to expand...
Click to collapse
It's rebooting in bootloader.
Little Snevil said:
Okay, is this?
(bootloader) [22:57:6.121354] pm8038_set_voltage function, vreg_id = 7
(bootloader) [22:57:6.124963] pm8038_set_voltage function, vreg_id = 8
(bootloader) [22:57:6.128572] pm8038_set_voltage function, vreg_id = 9
(bootloader) [22:57:6.132266] pm8038_set_voltage function, vreg_id = 10
(bootloader) [22:57:6.135961] pm8038_set_voltage function, vreg_id = 11
(bootloader) [22:57:6.139656] pm8038_set_voltage function, vreg_id = 13
(bootloader) [22:57:6.143351] pm8038_set_voltage function, vreg_id = 14
(bootloader) [22:57:6.147046] pm8038_set_voltage function, vreg_id = 15
(bootloader) [22:57:6.150741] pm8038_set_voltage function, vreg_id = 16
(bootloader) [22:57:6.154435] pm8038_set_voltage function, vreg_id = 17
(bootloader) [22:57:6.158130] pm8038_set_voltage function, vreg_id = 18
(bootloader) [22:57:6.161825] pm8038_set_voltage function, vreg_id = 20
(bootloader) [22:57:6.165520] pm8038_set_voltage function, vreg_id = 21
(bootloader) [22:57:6.169214] pm8038_set_voltage function, vreg_id = 22
(bootloader) [22:57:6.172909] pm8038_set_voltage function, vreg_id = 23
(bootloader) [22:57:6.176604] pm8038_set_voltage function, vreg_id = 25
(bootloader) [22:57:6.180299] pm8038_set_voltage function, vreg_id = 26
(bootloader) [22:57:6.183994] pm8038_set_voltage function, vreg_id = 27
(bootloader) [22:57:6.187689] pm8038_set_voltage function, vreg_id = 28
(bootloader) [22:57:6.191384] pm8038_set_voltage function, vreg_id = 29
(bootloader) [22:57:6.195078] pm8038_set_voltage function, vreg_id = 30
(bootloader) [22:57:6.198773] pm8038_set_voltage function, vreg_id = 31
(bootloader) [22:57:6.202468] pm8038_set_voltage function, vreg_id = 32
(bootloader) [22:57:6.203499] Update EBR
(bootloader) [22:57:6.213014] PMIC revision 1: F2
(bootloader) [22:57:6.214732] PMIC revision 2: 9
(bootloader) [22:57:6.216880] PM8038 version: 0x9F2
(bootloader) [22:57:6.224483] pm8038_set_voltage function, vreg_id = 8
(bootloader) [22:57:6.228178] pm8038_vreg_disable function, vreg_id = 8
(bootloader) [22:57:6.231959] pm8038_vreg_disable function, vreg_id = 34
(bootloader) [22:57:6.244557] pm8038_vreg_enable function, vreg_id = 8
(bootloader) [22:57:6.248252] pm8038_vreg_enable function, vreg_id = 34
(bootloader) [22:57:6.250830] m4_sensor_power_init: Done!!
(bootloader) [22:57:6.282591] PMIC pm8921_fix_charger_lockup
(bootloader) [22:57:6.285426] [ADC] read adc channel VBAT(1):
(bootloader) [22:57:6.288090] pm8921_adc_calib_device start
(bootloader) [22:57:6.306670] pm8921_adc_calib_device end
(bootloader) [22:57:6.319757] [ADC] adc_code = 0x984E, physical=4194
(bootloader) mV
(bootloader) [22:57:6.323710] [BATT] batt_vol=4194 mV current=174 mA FSM=
(bootloader) 3
(bootloader) [22:57:6.327404] PMIC PMIC charger init by user parameters
(bootloader) [22:57:6.329209] PMIC revision 1: F2
(bootloader) [22:57:6.330927] PMIC revision 2: 9
(bootloader) [22:57:6.336513] PMIC Restart Reason: Triggered from CHG (us
(bootloader) b charger insertion)
(bootloader) [22:57:6.339262] PMIC [Batt]pm_chg_failed_clear
(bootloader) [22:57:6.344761] PMIC [Batt] pm8921_chg_hw_init: FSM=3 after
(bootloader) clear chg fail bit
(bootloader) [22:57:6.347253] PMIC PMIC charger init done
(bootloader) [22:57:6.349487] [BATT]3 cells initiated.
(bootloader) [22:57:6.353784] [PMIC-BMS]r_sense=10 temp_channel=8 id_chan
(bootloader) nel=9
(bootloader) [22:57:6.356877] [ADC] read adc channel BATT_ID(9):
(bootloader) [22:57:6.369878] [ADC] adc_code = 0x65D2, physical=132 m
(bootloader) V
(bootloader) [22:57:6.372542] [BATT]: cur_cell is initiated
(bootloader) [22:57:6.376495] [PMIC-BMS] set bms_battery_data (cell_id=1)
(bootloader) .
(bootloader) [22:57:6.399062] [PMIC-BMS]BMS init OK -- ocv = 4221000
(bootloader) [22:57:6.405163] [PMIC-BMS]pm8921_bms_read_ocv_updated_flag:
(bootloader) OCV_UPDATE_STORAGE = 0xA0
(bootloader) [22:57:6.410490] [PMIC-BMS]pm8921_bms_get_ocv_flag: OCV_UPDA
(bootloader) TE_STORAGE = 0xA0
(bootloader) [22:57:6.419599] radio_is_boot_from_shutdown(): 1, reset_rea
(bootloader) son=0x5EA3E3BF, hw_reason=0x00000000, ocv_hw_reset=0x0000000
(bootloader) 0
(bootloader) [22:57:6.424926] [PMIC-BMS]pm8921_bms_set_ocv_flag: OCV_UPDA
(bootloader) TE_STORAGE = 0xA0
(bootloader) [22:57:6.428277] [ADC] read adc channel BATT_THERM(8):
(bootloader) [22:57:6.441193] [ADC] adc_code = 0x8DF1, physical=15 mV
(bootloader) [22:57:6.444028] [ADC] read adc channel VBAT(1):
(bootloader) [22:57:6.457117] [ADC] adc_code = 0x984A, physical=4193
(bootloader) mV
(bootloader) [22:57:6.460210] [ADC] read adc channel BATT_ID(9):
(bootloader) [22:57:6.473209] [ADC] adc_code = 0x65CF, physical=131 m
(bootloader) V
(bootloader) [22:57:6.476560] [ADC] read adc channel BATT_THERM(8):
(bootloader) [22:57:6.489476] [ADC] adc_code = 0x8DF0, physical=15 mV
(bootloader) [22:57:6.502415] [PMIC-BMS]P=93, adc_based_ocv=4217272, T=15
(bootloader) [22:57:6.508688] [BATT] V=4193 mV, T=15 C, OCV=4221 mV, ID=1
(bootloader) 31 mV, I=177 mA, P=93, FSM=3
(bootloader) [22:57:6.516593] radio_boot_mode() poweron_status=0x00000020
(bootloader) , reset_reason=0x5EA3E3BF, hw_reason=0x00000000
(bootloader) [22:57:6.617197] 902910 902E20
(bootloader) [22:57:6.708344] usb_init_hw: pull up d+
(bootloader) [22:57:6.802503] m4_panel_detect: MSM_LCD_ID0=0, MSM_LCD_ID1
(bootloader) =0
(bootloader) [22:57:6.806198] pm8038_vreg_disable function, vreg_id = 9
(bootloader) [22:57:6.839797] pm8038_vreg_enable function, vreg_id = 9
(bootloader) [22:57:6.854400] pm8038_vreg_enable function, vreg_id = 1
(bootloader) [22:57:6.884954] m4_init_display: Panel ID=0x940076, type=KI
(bootloader) WI_SHARP
(bootloader) [22:57:6.896176] Check panel_id = 9699446
(bootloader) [22:57:6.897551] mdp_clock_init
(bootloader) [22:57:6.899614] m4_init_display: done!
(bootloader) [22:57:6.936471] mipi_read_back:0 0x1C04
(bootloader) [22:57:6.938791] mipi_read_back:1 0x330000
(bootloader) [22:57:6.941283] mipi_read_back:2 0x53000000
(bootloader) [22:57:6.943861] read_display_id id= 0x530000
(bootloader) [22:57:6.945751] display_id =0x530000
(bootloader) [22:57:6.947212] display_id =0x0
(bootloader) [22:57:6.948844] display_id3 =0x53
(bootloader) [22:57:6.949961] SHARP panel
(bootloader) [22:57:7.370100] Init done!
(bootloader) [22:57:7.480838] m4_init_backlight
(bootloader) [22:57:7.592577] pmic8038_led_test!
(bootloader) [22:57:7.692955] 902910 902E20
(bootloader) [22:57:7.784101] usb_init_hw: pull up d+
(bootloader) [22:57:7.817077] chipset_bootmode(): reset_reason=0x5EA3E3BF
(bootloader) [22:57:7.818538] Board_PID : 232
(bootloader) [22:57:9.187300] [SD_HW_ERR] read data fail in CMD18
(bootloader) [22:57:9.190050] CMD18: read fifo failed, retry
(bootloader) [22:57:10.233903] [SD_HW_ERR] read data fail in CMD18
(bootloader) [22:57:10.236825] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:10.238629] PMIC revision 1: F2
(bootloader) [22:57:10.240348] PMIC revision 2: 9
(bootloader) [22:57:10.243785] MSM?-p?-v1.2(0x2075B0E1) PMIC8038-v2.0
(bootloader) [22:57:10.245564] Gyro ID = 0x69
(bootloader) [22:57:10.247368] Setting gy_type = 1
(bootloader) [22:57:10.251378] reset rt5501 ret 0
(bootloader) [22:57:10.255159] m4_init is finished: 19:49:13, Aug 13 2015
(bootloader) [22:57:10.267861] board_m4 support widevine level 1
(bootloader) [22:57:10.280159] [ERR] Cmd18 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:10.284627] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:10.287806] [SD_HW_ERR] read data fail in CMD18
(bootloader) [22:57:10.289439] CMD18: cmd failed
(bootloader) [22:57:10.292361] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:10.295024] [PG_ERROR] htc_pg_hdr_get(117):[22:57:10.2
(bootloader) 97001] sd_read_sector error
(bootloader) [22:57:10.300094] [PG_ERROR] htc_pg_part_hdr_get(169):[22:57
(bootloader) :10.302156] htc_pg_hdr_get failed
(bootloader) [22:57:10.307484] radio_update_drm_config: read pg2fs_wvkey_
(bootloader) lv1 len (0) failed
(bootloader) [22:57:10.309975] valid keybox is not existed
(bootloader) [22:57:10.323601] [ERR] Cmd18 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:10.328069] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:10.331248] [SD_HW_ERR] read data fail in CMD18
(bootloader) [22:57:10.332881] CMD18: cmd failed
(bootloader) [22:57:10.335803] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:10.338466] [PG_ERROR] htc_pg_hdr_get(117):[22:57:10.3
(bootloader) 40443] sd_read_sector error
(bootloader) [22:57:10.343536] [PG_ERROR] htc_pg_part_hdr_get(169):[22:57
(bootloader) :10.345598] htc_pg_hdr_get failed
(bootloader) [22:57:10.350582] radio_update_drm_config: read pg2fs_dpkey
(bootloader) len (0) failed
(bootloader) [22:57:10.362879] [ERR] Cmd18 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:10.367347] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:10.370526] [SD_HW_ERR] read data fail in CMD18
(bootloader) [22:57:10.372159] CMD18: cmd failed
(bootloader) [22:57:10.375080] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:10.377744] [PG_ERROR] htc_pg_hdr_get(117):[22:57:10.3
(bootloader) 79721] sd_read_sector error
(bootloader) [22:57:10.382814] [PG_ERROR] htc_pg_part_hdr_get(169):[22:57
(bootloader) :10.384876] htc_pg_hdr_get failed
(bootloader) [22:57:10.389860] radio_update_drm_config: read pg2fs_prkey
(bootloader) len (0) failed
(bootloader) [22:57:10.402111] [ERR] Cmd18 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:10.406579] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:10.409758] [SD_HW_ERR] read data fail in CMD18
(bootloader) [22:57:10.411391] CMD18: cmd failed
(bootloader) [22:57:10.414312] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:10.416976] [PG_ERROR] htc_pg_hdr_get(117):[22:57:10.4
(bootloader) 18953] sd_read_sector error
(bootloader) [22:57:10.422046] [PG_ERROR] htc_pg_part_hdr_get(169):[22:57
(bootloader) :10.424108] htc_pg_hdr_get failed
(bootloader) [22:57:10.428834] radio_update_drm_config: read pg2fs_prkey
(bootloader) data failed
(bootloader) [22:57:10.442460] [ERR] Cmd18 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:10.446928] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:10.450108] [SD_HW_ERR] read data fail in CMD18
(bootloader) [22:57:10.451740] CMD18: cmd failed
(bootloader) [22:57:10.454662] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:10.457326] [PG_ERROR] htc_pg_hdr_get(117):[22:57:10.4
(bootloader) 59302] sd_read_sector error
(bootloader) [22:57:10.462395] [PG_ERROR] htc_pg_part_hdr_get(169):[22:57
(bootloader) :10.464457] htc_pg_hdr_get failed
(bootloader) [22:57:10.469269] isGDriveRedeemed: read pg2fs_gdvoucher_red
(bootloader) eemed failed
(bootloader) [22:57:10.473222] chipset_bootmode(): reset_reason=0x5EA3E3B
(bootloader) F
(bootloader) [22:57:10.481127] radio_boot_mode() poweron_status=0x0000002
(bootloader) 0, reset_reason=0x5EA3E3BF, hw_reason=0x00000000
(bootloader) [22:57:10.483877] enter recovery_offmod_charging
(bootloader) [22:57:10.486283] SecuritySDInit counter = 1
(bootloader) [22:57:10.490407] [SD_ERR] The project does not support SD c
(bootloader) ard
(bootloader) [22:57:10.491696] 902910 902E20
(bootloader) [22:57:10.704671] <0>No USB device attached, portsc 0x8C0010
(bootloader) 00
(bootloader) [22:57:10.706819] <1>usbhost_start failed
(bootloader) [22:57:10.807104] 902910 902E20
(bootloader) [22:57:10.898336] usb_init_hw: pull low d+
(bootloader) [22:57:10.930685] No smart SD in device disable detect
(bootloader) [22:57:10.933950] [JAVACARD_ERR] SD/USBDISK Init error
(bootloader) [22:57:10.935755] ARM11 Boot Mode: 22
(bootloader) [22:57:10.937645] Platform: HBOOT-8930
(bootloader) [22:57:10.969198] [ERR] Cmd17 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:10.973666] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:10.976845] [SD_HW_ERR] read data fail in CMD17
(bootloader) [22:57:10.978478] CMD17: cmd failed
(bootloader) [22:57:10.981399] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:10.984922] [ERR] partition_read_emmc(876): error 2
(bootloader) [22:57:10.996460] [ERR] Cmd17 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:11.000928] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:11.004107] [SD_HW_ERR] read data fail in CMD17
(bootloader) [22:57:11.005740] CMD17: cmd failed
(bootloader) [22:57:11.008661] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:11.012184] [ERR] partition_read_emmc(876): error 2
(bootloader) [22:57:11.016051] [ERR] Boot/Recovery image does not exist!!
(bootloader) !
(bootloader) [22:57:11.085061] [ERR] Cmd18 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:11.089529] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:11.092708] [SD_HW_ERR] read data fail in CMD18
(bootloader) [22:57:11.094341] CMD18: cmd failed
(bootloader) [22:57:11.097262] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:11.099926] [PG_ERROR] htc_pg_hdr_get(117):[22:57:11.1
(bootloader) 01903] sd_read_sector error
(bootloader) [22:57:11.104996] [PG_ERROR] htc_pg_part_hdr_get(169):[22:57
(bootloader) :11.107058] htc_pg_hdr_get failed
(bootloader) [22:57:11.119953] [ERR] Cmd17 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:11.124421] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:11.127600] [SD_HW_ERR] read data fail in CMD17
(bootloader) [22:57:11.129232] CMD17: cmd failed
(bootloader) [22:57:11.132154] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:11.136192] [FAT_ERROR] fat_open_file: load bpb fail(-
(bootloader) 5)
(bootloader) [22:57:11.140403] No RADIOVER.CFG in radio image for SSD ver
(bootloader) sion!
(bootloader) [22:57:11.152260] [ERR] Cmd17 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:11.156728] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:11.159907] [SD_HW_ERR] read data fail in CMD17
(bootloader) [22:57:11.161540] CMD17: cmd failed
(bootloader) [22:57:11.164461] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:11.168500] [FAT_ERROR] fat_open_file: load bpb fail(-
(bootloader) 5)
(bootloader) [22:57:11.172796] No OPENDSPVER.CFG in adsp image for SSD ve
(bootloader) rsion!
(bootloader) [22:57:11.326390] m4_init_backlight
(bootloader) [22:57:11.444752] m4_battery_stored_data_clean: magic_num=0,
(bootloader) stored_soc=0, stored_ocv=0, stored_cc=0, currtime=ld
(bootloader) [22:57:11.458320] [ERR] Cmd18 polling status timed out, MCI_
(bootloader) STATUS: 0x4C2000
(bootloader) [22:57:11.462788] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:11.465968] [SD_HW_ERR] read data fail in CMD18
(bootloader) [22:57:11.467600] CMD18: cmd failed
(bootloader) [22:57:11.470522] [SD_HW_ERR] SD: Read data fail..
(bootloader) [22:57:11.474044] [ERR] partition_read_emmc(876): error 2
(bootloader) [22:57:11.475505] Start Verify: 3
(bootloader) [22:57:11.487764] [ERR] Cmd25 polling status timed out, MCI_
(bootloader) STATUS: 0x4C0000
(bootloader) [22:57:11.492232] [ERR] sdcc_command: sdcc_poll_status error
(bootloader) , rc: 2
(bootloader) [22:57:11.493349] usb_Vbus 0
(bootloader) [22:57:11.593633] 902910 902E20
(bootloader) [22:57:11.684779] usb_init_hw: pull up d+
(bootloader) [22:57:11.696093]
(bootloader) ###[ Fastboot Mode ]###
(bootloader) [22:57:11.700045] chipset_bootmode(): reset_reason=0x5EA3E3B
(bootloader) F
(bootloader) [22:57:11.701678]
(bootloader) USB_STS_SUSPEND
(bootloader) [22:57:11.791645]
(bootloader) USB_STS_RESET
(bootloader) [22:57:11.793735] USB_SPEED_HIGH
(bootloader) [22:57:11.866477] usb_setupEVICE_WRITE:SET_CONFIGURATION:1
(bootloader) [22:57:11.867938] Set usb_ats = 0
(bootloader) [22:58:50.814885] fastboot_command:[oem dmesg]
(bootloader) [22:58:50.816432] fb_cmd_oem:dmesg
(bootloader) [22:58:50.820728] register_debug_console: new entry ptr=0x90
(bootloader) 000940
(bootloader) [22:59:48.210992] fastboot_command:[oem dmesg]
(bootloader) [22:59:48.212539] fb_cmd_oem:dmesg
(bootloader) [22:59:48.216835] register_debug_console: new entry ptr=0x90
(bootloader) 000940
OKAY [ 1.468s]
finished. total time: 1.468s
And this?
C:\adb>fastboot oem last_dmesg
...
(bootloader) [0:0:0.000008] check_ramlog_region: Backup last hboot ramlog
(bootloader) .
OKAY [ 0.013s]
finished. total time: 0.013s
It's rebooting in bootloader.
Click to expand...
Click to collapse
Defective emmc, your phone just won a trip in a garbage can. Sorry
Sent from my HTC One using XDA Labs
Ok, people. I've spent my fair time of reading/researching/testing/messing and it's simply not working. Therefore, I have come in search of people who are more knowledgeable (not sure it's a word) than me and could help me out of the kindness of their hearts. First things first:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.30.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.1700.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT364W902628
(bootloader) imei: 35585xxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 4276mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e135dbf9
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.040s
Bear in mind this is a phone that has most definitely been tampered with. I bought it from a small shop in NY, the owner claimed it was imported from Australia which meant it worked in Brazil (where I live). Through the years I have changed it to a supercid (11111111), changed it back to a cid I'm not sure it's the original, installed a GPE ROM, tried installing Cyanogen and that's when everything started going awry. For no reason I can say for sure, the phone entered the oh-so-familiar state of bootloop. I get the Google logo (maybe due to when I had my GPE ROM on it, I guess) and I can't boot into recovery, no matter how many times I try flashing it and erasing cache. What I want to say is that I'm pretty much stuck with fastboot and a corrupted OS. My PC (Windows 10) recognizes the phone on fastboot mode, but that's pretty much all it does. No adb command works, maybe because it won't boot as far as it needs to load adb. A few other things:
- Yes, RUU would be great. However I haven't found anything that works. I keep getting signature errors and problems while flashing zips on rebootRUU. Tried it an absurd amount of times with many, many options.
- Getting S-OFF could be also a step in the way of bringing the phone back to life, however rumrunner requires adb. I can't emphasize this enough: for the last few months I've been trying to ressurrect this phone, I could not get adb to work.
- In very rare ocasions I get maybe one or two seconds of the splash screen of TWRP recovery. That shows up, freezes and moments after I'm back to the Google logo.
I would like to thank in advance anybody who puts their mind to work on this issue. You people are great. So, any ideas?
joaoluizsv said:
Ok, people. I've spent my fair time of reading/researching/testing/messing and it's simply not working. Therefore, I have come in search of people who are more knowledgeable (not sure it's a word) than me and could help me out of the kindness of their hearts. First things first:
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.30.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.1700.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT364W902628
(bootloader) imei: 35585xxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 4276mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e135dbf9
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.040s
Bear in mind this is a phone that has most definitely been tampered with. I bought it from a small shop in NY, the owner claimed it was imported from Australia which meant it worked in Brazil (where I live). Through the years I have changed it to a supercid (11111111), changed it back to a cid I'm not sure it's the original, installed a GPE ROM, tried installing Cyanogen and that's when everything started going awry. For no reason I can say for sure, the phone entered the oh-so-familiar state of bootloop. I get the Google logo (maybe due to when I had my GPE ROM on it, I guess) and I can't boot into recovery, no matter how many times I try flashing it and erasing cache. What I want to say is that I'm pretty much stuck with fastboot and a corrupted OS. My PC (Windows 10) recognizes the phone on fastboot mode, but that's pretty much all it does. No adb command works, maybe because it won't boot as far as it needs to load adb. A few other things:
- Yes, RUU would be great. However I haven't found anything that works. I keep getting signature errors and problems while flashing zips on rebootRUU. Tried it an absurd amount of times with many, many options.
- Getting S-OFF could be also a step in the way of bringing the phone back to life, however rumrunner requires adb. I can't emphasize this enough: for the last few months I've been trying to ressurrect this phone, I could not get adb to work.
- In very rare ocasions I get maybe one or two seconds of the splash screen of TWRP recovery. That shows up, freezes and moments after I'm back to the Google logo.
I would like to thank in advance anybody who puts their mind to work on this issue. You people are great. So, any ideas?
Click to expand...
Click to collapse
Why is the phone back to S-ON? That was a big mistake :silly:... You can't even flash a RUU now that your CID and MID does not match your version-main (GPE firmware + Asian CID/MID).
Your only hope is to get this custom recovery booting. Did you tried mdmower's twrp?
http://android.cmphys.com/twrp-m7/
Code:
fastboot flash recovery filename.img
fastboot erase cache
fastboot reboot-bootloader
alray said:
Why is the phone back to S-ON? That was a big mistake :silly:... You can't even flash a RUU now that your CID and MID does not match your version-main (GPE firmware + Asian CID/MID).
Your only hope is to get this custom recovery booting. Did you tried mdmower's twrp?
http://android.cmphys.com/twrp-m7/
Code:
fastboot flash recovery filename.img
fastboot erase cache
fastboot reboot-bootloader
Click to expand...
Click to collapse
Why is the phone back to S-ON? That was a big mistake ... You can't even flash a RUU now that your CID and MID does not match your version-main (GPE firmware + Asian CID/MID).
Your only hope is to get this custom recovery booting. Did you tried mdmower's twrp?
http://android.cmphys.com/twrp-m7/
Code:
fastboot flash recovery filename.img
fastboot erase cache
fastboot reboot-bootloader
Click to expand...
Click to collapse
First of all, thank you so much for replying! The S-ON part is because I was thinking about getting it unrooted to send it back to HTC. Dumb move there, I admit.
I got the recovery flashed and once every 12 or 13 reboots I get the recovery to run for 20 seconds or even 1 minute, depending on what I do. I have an USB dongle that I'm trying to use to install Cyanogen. No luck there, so far. When I try to get it do ADB Sideload it tends to crash when I check to Wipe Delvik/Wipe Cache. Any pointers to what would be the way to install a ROM here with the biggest chance of success?
Thank you once again for your time!
joaoluizsv said:
First of all, thank you so much for replying! The S-ON part is because I was thinking about getting it unrooted to send it back to HTC. Dumb move there, I admit.
I got the recovery flashed and once every 12 or 13 reboots I get the recovery to run for 20 seconds or even 1 minute, depending on what I do. I have an USB dongle that I'm trying to use to install Cyanogen. No luck there, so far. When I try to get it do ADB Sideload it tends to crash when I check to Wipe Delvik/Wipe Cache. Any pointers to what would be the way to install a ROM here with the biggest chance of success?
Thank you once again for your time!
Click to expand...
Click to collapse
Can you post the output of "fastboot oem dmesg" and "fastboot oem last_dmesg"
I'm curious to see if everything looks fine on the hardware side, more precisely if the emmc is in good condition.
Maybe you could try every custom recovery versions (CWM and TWRP) to see if it can boot correctly and be stable long enough to flash a rom.
alray said:
Can you post the output of "fastboot oem dmesg" and "fastboot oem last_dmesg"
I'm curious to see if everything looks fine on the hardware side, more precisely if the emmc is in good condition.
Maybe you could try every custom recovery versions (CWM and TWRP) to see if it can boot correctly and be stable long enough to flash a rom.
Click to expand...
Click to collapse
Yeah, I'm trying all possible custom recovery versions right now. If anything works out, I'll post here.
Ok, this is what I got from dmesg (it doesn't seem complete, although I tried to Select All):
(bootloader) [91131] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:827FF
(bootloader) [91154] Command response received: 00000900
(bootloader) [91243] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:84800
(bootloader) [91266] Command response received: 00000900
(bootloader) [91355] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8E801
(bootloader) [91378] Command response received: 00000900
(bootloader) [91474] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8E80A
(bootloader) [91497] Command response received: 00000900
(bootloader) [91593] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8EA0B
(bootloader) [91616] Command response received: 00000900
(bootloader) [91730] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8EA2C
(bootloader) [91753] Command response received: 00000900
(bootloader) [91867] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8F42E
(bootloader) [91890] Command response received: 00000900
(bootloader) [91979] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8F4AF
(bootloader) [92002] Command response received: 00000900
(bootloader) [92116] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:8FCB0
(bootloader) [92139] Command response received: 00000900
(bootloader) [92235] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:C0000
(bootloader) [92258] Command response received: 00000900
(bootloader) [92423] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARGA7FE
(bootloader) [92446] Command response received: 00000900
(bootloader) [92605] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:100000
(bootloader) [92628] Command response received: 00000900
(bootloader) [92793] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:12FFFF
(bootloader) [92816] Command response received: 00000900
(bootloader) [93000] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:138000
(bootloader) [93023] Command response received: 00000900
(bootloader) [93200] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:140000
(bootloader) [93223] Command response received: 00000900
(bootloader) [93384] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:4DFFFF
(bootloader) [93407] Command response received: 00000900
(bootloader) [93568] Command sent: CMD17 MCI_CMD_REG:451 MCI_ARG:61FFFF
(bootloader) [93591] Command response received: 00000900
(bootloader) [93731] check pg1fs
(bootloader) [96807] check pg2fs
(bootloader) [134886] chipset_setting_init
(bootloader) [137394] chipset_setting_init: read pid 203
(bootloader) [137431] SECURE_SMEM_STRUCT 84505000
(bootloader) [139726] read_simlock(1425): 6E7432F0, 4E07AFC7
(bootloader) [140930] radio_init_secure_smem(929): C9F35678, 0
(bootloader) [147638] read_simlock_password(398): EB, 95, 41, 94
(bootloader) [147677] unlock_rec[0] = 0x84508000
(bootloader) [149552] unlock_rec[1] = 0x84509000
(bootloader) [151413] simlock_passwd 0x84507000
(bootloader) [153798] secure_update_simlock ret = 0
(bootloader) [154394] final simlock 0
(bootloader) [155312] secure_set_simlock ret = 0
(bootloader) [160684] msm_rpm_init: RPM firmware 3.0.16849250
(bootloader) [160716] MPM_SLEEP_TICK: llums
(bootloader) [160740] [SYSINFO] DDR: Elpida
(bootloader) [160768] [SYSINFO] PVS: Krait:2 Q6:Nom VDDCX:Slow
(bootloader) [160789] [SYSINFO] Vdd_dig: 0.5v
(bootloader) [160811] hw_ver_id is 207150E1
(bootloader) [160832] speed_bin is 1
(bootloader) [160858] 0x207150E1 CPU-1.7G PMIC-v3.0
(bootloader) [160877] [SYSINFO] 0x207150E1 CPU-1.7G PMIC-v3.0
(bootloader) [160895] [SYSINFO] PMIC version
(bootloader) [160918] PMIC revision 1: F4
(bootloader) [160941] PMIC revision 2: 6
(bootloader) [160959] pm8921_check_revision: *revision = 6F4
(bootloader) [160977] [SYSINFO] End PMIC version[160998]
(bootloader) eMMC Manufacturer ID: 15
(bootloader) [161019] [SYSINFO] eMMC: Samsung 61071359 sectors 29819 MB
(bootloader) [161040] [SYSINFO] eMMC-CID: 1501004D 12345678 41047E13 C7E2
(bootloader) 1130
(bootloader) [162347] [FAT_ERROR] fat_open_file: can not find RADIOVER.CF
(bootloader) G
(bootloader) [162379] No RADIOVER.CFG in radio image for WSD version!
(bootloader) [162821] [FAT_ERROR] No M$-DOS partition found
(bootloader) [162842] [FAT_ERROR] fat_open_file: load bpb fail(-22)
(bootloader) [162873] No OPENDSPVER.CFG in adsp image for SSD version!
(bootloader) [163233] [SYSINFO] SBL1: 1.010.30.48
(bootloader) [163493] [SYSINFO] SBL2: 1.010.30.47
(bootloader) [163819] [SYSINFO] SBL3: 1.010.30.45
(bootloader) [164066] [SYSINFO] TZ: 1.430.24.09
(bootloader) [164084] [SYSINFO] RPM: 3.0.98.25
(bootloader) [164129] val0 71 val1 164 val2 5 val3 0[164154] pm8921_read
(bootloader) _time: secs = 369735, h::m:s == 6::42::15, d/m/y = 5/0/70
(bootloader) [164174] Current time : 1970-1-5 6:42:15 UTC
(bootloader) [176884] pm8921_vreg_disable function, vreg_id = 27
(bootloader) [176906] pm8921_vreg_disable function, vreg_id = 34
(bootloader) [176931] pm8921_vreg_disable function, vreg_id = 35
(bootloader) [176951] pm8921_vreg_disable function, vreg_id = 9
(bootloader) [176972] [ADC] read adc channel VBAT(1):
(bootloader) [176990] pm8921_adc_calib_device start
(bootloader) [194107] pm8921_adc_calib_device end
(bootloader) [204187] [ADC] adc_code = 0x98A7, physical=4204 mV
(bootloader) [204210] [BATT] setting_check_perflock_allowance: vol_curr=4
(bootloader) 204 mV vol_limit=3550 mV
(bootloader) [204364] [THERMAL]tsens_init: Tsens init done
(bootloader) [205388] msm_thermal: CPU0 temperature is 44 C
(bootloader) [205412] [WARNING][ACPU] get_pvs: ACPU PVS: Unknown. Default
(bootloader) ing to slow
(bootloader) [205435] [INFO][ACPU] acpuclk_8064_init: Max ACPU freq: 1512
(bootloader) 000 KHz
(bootloader) [205490] [DEBUG][ACPU] hfpll_init: Initializing HFPLL4
(bootloader) [205517] [WARNING][ACPU] hfpll_enable: This regulator hfpll_
(bootloader) l2 (40) is LVS type, APPS cannot control it.
(bootloader) [205624] [DEBUG][ACPU] hfpll_init: Initializing HFPLL0
(bootloader) [205677] [WARNING][ACPU] hfpll_enable: This regulator hfpll0
(bootloader) (40) is LVS type, APPS cannot control it.
(bootloader) [205794] [INFO][ACPU] acpuclk_set_rate: Set cpu0 rate to 918
(bootloader) 000
(bootloader) [205810] [DEBUG][ACPU] acpuclk_8064_set_rate: Switching from
(bootloader) ACPU0 rate 1512000 KHz -> 918000 KHz
(bootloader) [206061] [DEBUG][ACPU] acpuclk_8064_set_rate: ACPU0 speed ch
(bootloader) ange complete
(bootloader) [206082] [INFO][ACPU] acpuclk_set_rate: Set cpu0 rate to 151
(bootloader) 2000
(bootloader) [206122] [DEBUG][ACPU] acpuclk_8064_set_rate: Switching from
(bootloader) ACPU0 rate 918000 KHz -> 1512000 KHz
(bootloader) [206356] [DEBUG][ACPU] acpuclk_8064_set_rate: ACPU0 speed ch
(bootloader) ange complete
(bootloader) [206369] Enable hboot boot time perflock
(bootloader) [206391] Disable uart log to speed up boot time
(bootloader) [206403] --pm_check_power_on_status--[209814] pm8921_vreg_di
(bootloader) sable function, vreg_id = 19
(bootloader) [209828] pm8921_vreg_disable function, vreg_id = 24
(bootloader) [209845] m7_vreg_init: enable lvs2 for XB
(bootloader) [219863] pm8921_vreg_disable function, vreg_id = 16
(bootloader) [219929] start block/size of [dzsystem] is different to [sys
(bootloader) tem]. Sync it.
(bootloader) [219946] dzsystem: start block = 1310721; size = 3801086
(bootloader) [219961] Update EBR
(bootloader) [230310] pm8921_vreg_disable function, vreg_id = 15
(bootloader) [230322] pm8921_vreg_disable function, vreg_id = 17
(bootloader) [230335] pm8921_vreg_disable function, vreg_id = 14
(bootloader) [240528] pm8921_vreg_disable function, vreg_id = 13
(bootloader) [460569] PMIC pm8921_fix_charger_lockup
(bootloader) [460624] [ADC] read adc channel VBAT(1):
(bootloader) [470693] [ADC] adc_code = 0x986E, physical=4187 mV
(bootloader) [470727] [BATT] batt_vol=4187 mV current=570 mA FSM=3
(bootloader) [470739] PMIC PMIC charger init by user parameters
(bootloader) [470755] PMIC revision 1: F4
(bootloader) [470771] PMIC revision 2: 6
(bootloader) [470789] PMIC Restart Reason: Triggered from KPD (power key
(bootloader) press)
(bootloader) [470981] PMIC [Batt]pm_chg_failed_clear
(bootloader) [471042] PMIC [Batt] pm8921_chg_hw_init: FSM=3 after clear c
(bootloader) hg fail bit
(bootloader) [471055] PMIC PMIC charger init done
(bootloader) [471067] [BATT]3 cells initiated.
(bootloader) [471097] [PMIC-BMS]r_sense=10 temp_channel=8 id_channel=9
(bootloader) [471110] [ADC] read adc channel BATT_ID(9):
(bootloader) [481180] [ADC] adc_code = 0x7019, physical=384 mV
(bootloader) [481193] [BATT]: cur_cell is initiated
(bootloader) [481205] [PMIC-BMS] set bms_battery_data (cell_id=1).
(bootloader) [501350] [PMIC-BMS]BMS init OK -- ocv = 4194000
(bootloader) [501369] [PMIC-BMS]pm8921_bms_read_ocv_updated_flag: OCV_UPD
(bootloader) ATE_STORAGE = 0x0
(bootloader) [501389] [PMIC-BMS]pm8921_bms_get_ocv_flag: OCV_UPDATE_STORA
(bootloader) GE = 0x0
(bootloader) [501406] radio_is_boot_from_shutdown(): 1, reset_reason=0xEE
(bootloader) 109782, hw_reason=0x00000000, ocv_hw_reset=0x00000000
(bootloader) [501435] [PMIC-BMS]pm8921_bms_set_ocv_flag: OCV_UPDATE_STORA
(bootloader) GE = 0x0
(bootloader) [501448] [ADC] read adc channel BATT_THERM(8):
(bootloader) [511518] [ADC] adc_code = 0x7F47, physical=34 mV
(bootloader) [511530] [ADC] read adc channel VBAT(1):
(bootloader) [521597] [ADC] adc_code = 0x986C, physical=4187 mV
(bootloader) [521609] [ADC] read adc channel BATT_ID(9):
(bootloader) [531679] [ADC] adc_code = 0x701A, physical=384 mV
(bootloader) [531711] [ADC] read adc channel BATT_THERM(8):
(bootloader) [541779] [ADC] adc_code = 0x7F48, physical=34 mV
(bootloader) [551871] [PMIC-BMS]P=92, adc_based_ocv=4225680, T=34
(bootloader) [551928] [BATT] V=4187 mV, T=34 C, OCV=4194 mV, ID=384 mV, I
(bootloader) =310 mA, P=92, FSM=3
(bootloader) [551945] radio_boot_mode() poweron_status=0x00000001, reset_
(bootloader) reason=0xEE109782, hw_reason=0x00000000
(bootloader) [652227] E0902910 E0902E20
(bootloader) [742248] usb_init_hw: pull up d+
(bootloader) [772269] m7_set_charging(1)
(bootloader) [772290] m7_hw_reset_nfc
(bootloader) [1002181] m7_init_display
(bootloader) [1003215] m7_init_display ID LCD_ID0=20 LCD_ID1=43
(bootloader) [1004332] m7_init_display ID id0=0 id1=1
(bootloader) [1009344] m7_init_display_panelid_940067
(bootloader) [1009356] SHARP_RENESAS FULL HD panel
(bootloader) [1026436] mdp_clock_init
(bootloader) [1040142] Video Mode
(bootloader) [1062181] mipi_read_back:0 0x21000012
(bootloader) [1084219] mipi_read_back:0 0x21000012
(bootloader) [1106256] mipi_read_back:0 0x21C5002D
(bootloader) [1106268] id1= 0xA0120000, id2= 0xA0120000, id3= 0xA02D00C5
(bootloader) [1114849] M7 sharp renesas cmd panel ID=0x940069
(bootloader) [1114864] mipi_dsi_cmds_tx_ext
(bootloader) [1251968] [CIR] m7_init_cir, enter.
(bootloader) [1251986] [CIR] m7_init_cir, end.
(bootloader) [1252007] chipset_bootmode(): reset_reason=0xEE109782
(bootloader) [1252405] Board_PID : 203
(bootloader) [1253202] [FAT_ERROR] fat_open_file: can not find MDATA.CFG
(bootloader) [1253242] No MDATA.CFG
(bootloader) [1254661] Gyro ID = 0xA5
(bootloader) [1256080] Gyro ID = 0xD4
(bootloader) [1256093] Setting gy_type = 2
(bootloader) [1256106] m7_init is finished: 22:11:14, Dec 2 2014
(bootloader) [1264868] TZ_HTC_SVC_ENC ret = 0
(bootloader) [1265692] TZ_HTC_SVC_ENC ret = 0
(bootloader) [1265753] valid keybox is existed
(bootloader) [1274846] TZ_HTC_SVC_ENC ret = 0
(bootloader) [1284469] TZ_HTC_SVC_ENC ret = 0
(bootloader) [1289056] radio_update_drm_config: read pg2fs_dapkey len (0)
(bootloader) failed
(bootloader) [1294370] chipset_bootmode(): reset_reason=0xEE109782
(bootloader) [1294768] radio_boot_mode() poweron_status=0x00000001, reset
(bootloader) _reason=0xEE109782, hw_reason=0x00000000
(bootloader) [1295267] [SD_ERR] The project does not support SD card
(bootloader) [1295467] E0902910 E0902E20
(bootloader) [1505511] <0>No USB device attached, portsc 0x8C001000
(bootloader) [1505524] <1>usbhost_start failed
(bootloader) [1605542] E0902910 E0902E20
(bootloader) [1695562] usb_init_hw: pull low d+
(bootloader) [1725673] [JAVACARD_ERR] SD/USBDISK Init error
(bootloader) [1725688] [INFO][ACPU] acpuclk_set_rate: Set cpu0 rate to 91
(bootloader) 8000
(bootloader) [1725703] [DEBUG][ACPU] acpuclk_8064_set_rate: Switching fro
(bootloader) m ACPU0 rate 1512000 KHz -> 918000 KHz
(bootloader) [1725954] [DEBUG][ACPU] acpuclk_8064_set_rate: ACPU0 speed c
(bootloader) hange complete
(bootloader) [1725973] Disable hboot boot time perflock
(bootloader) [1726341] ARM11 Boot Mode: 8
(bootloader) [1726358] Platform: HBOOT-8064
(bootloader) [2095882] m7_init_backlight: panel_id=0x940069
(bootloader) [2097910] PWM ic version A2
(bootloader) [2205414] mipi_dsi_cmds_tx_ext
(bootloader) [2306746] E0902910 E0902E20
(bootloader) [2396773] usb_init_hw: pull low d+
(bootloader) [2426799] [SD_ERR] The project does not support SD card
(bootloader) [2427090] E0902910 E0902E20
(bootloader) [2637141] <0>No USB device attached, portsc 0x8C001000
(bootloader) [2637161] <1>usbhost_start failed
(bootloader) [2737189] E0902910 E0902E20
(bootloader) [2827215] usb_init_hw: pull low d+
(bootloader) [2857345]
(bootloader) ###[ Bootloader Mode ]###
(bootloader) [2857360]
(bootloader) hboot>[2857376] m7_set_charging(1)
(bootloader) [4050209] usb_Vbus 0
(bootloader) [4150237] E0902910 E0902E20
(bootloader) [4240263] usb_init_hw: pull up d+
(bootloader) [4250284]
(bootloader) ###[ Fastboot Mode ]###
(bootloader) [4250303] chipset_bootmode(): reset_reason=0xEE109782
(bootloader) [4250923]
(bootloader) USB_STS_SUSPEND
(bootloader) [4250946] m7_set_charging(1)
(bootloader) [4342067]
(bootloader) USB_STS_RESET
(bootloader) [4344339] USB_SPEED_HIGH
(bootloader) [6208617] usb_setupEVICE_WRITE:SET_CONFIGURATION:1
(bootloader) [6208657] Set usb_ats = 0
(bootloader) [31025006]
(bootloader) USB_STS_SUSPEND
(bootloader) [38170456]
(bootloader) USB_STS_RESET
(bootloader) [38172737] USB_SPEED_HIGH
(bootloader) [41472437] usb_setupEVICE_WRITE:SET_CONFIGURATION:1
(bootloader) [41472487] Set usb_ats = 0
(bootloader) [604251983] m7_set_charging(0)
(bootloader) [604752013] m7_set_charging(1)
(bootloader) [14] m7_set_charging(0)
(bootloader) [500044] m7_set_charging(1)
(bootloader) [600501076] m7_set_charging(0)
(bootloader) [601001106] m7_set_charging(1)
(bootloader) [13] m7_set_charging(0)
(bootloader) [500041] m7_set_charging(1)
(bootloader) [600501080] m7_set_charging(0)
(bootloader) [601001110] m7_set_charging(1)
(bootloader) [10] m7_set_charging(0)
(bootloader) [500037] m7_set_charging(1)
(bootloader) [600501067] m7_set_charging(0)
(bootloader) [601001096] m7_set_charging(1)
(bootloader) [11] m7_set_charging(0)
(bootloader) [500039] m7_set_charging(1)
(bootloader) [600501076] m7_set_charging(0)
(bootloader) [601001105] m7_set_charging(1)
(bootloader) [6] m7_set_charging(0)
(bootloader) [500034] m7_set_charging(1)
(bootloader) [600501071] m7_set_charging(0)
(bootloader) [601001099] m7_set_charging(1)
(bootloader) [12] m7_set_charging(0)
(bootloader) [500039] m7_set_charging(1)
(bootloader) [593080586] fastboot_command:[oem dmesg]
(bootloader) [593080606] fb_cmd_oem:dmesg
(bootloader) [593080656] register_debug_console: new entry ptr=0x84500140
(bootloader) [600501073] m7_set_charging(0)
(bootloader) [601001102] m7_set_charging(1)
(bootloader) [7] m7_set_charging(0)
(bootloader) [500036] m7_set_charging(1)
(bootloader) [8246292] fastboot_command:[oem dmesg]
(bootloader) [8246311] fb_cmd_oem:dmesg
(bootloader) [8246356] register_debug_console: new entry ptr=0x84500140
(bootloader) [278658684] fastboot_command:[oem dmesg]
(bootloader) [278658704] fb_cmd_oem:dmesg
(bootloader) [278658753] register_debug_console: new entry ptr=0x84500140
OKAY [ 0.771s]
finished. total time: 0.772s
For some reason my last_dmesg post didn't publish. Here is what I just pulled:
(bootloader) [205936] [WARNING][ACPU] hfpll_enable: This regulator hfpll0
(bootloader) (40) is LVS type, APPS cannot control it.
(bootloader) [206049] [INFO][ACPU] acpuclk_set_rate: Set cpu0 rate to 918
(bootloader) 000
(bootloader) [206063] [DEBUG][ACPU] acpuclk_8064_set_rate: Switching from
(bootloader) ACPU0 rate 1512000 KHz -> 918000 KHz
(bootloader) [206312] [DEBUG][ACPU] acpuclk_8064_set_rate: ACPU0 speed ch
(bootloader) ange complete
(bootloader) [206331] [INFO][ACPU] acpuclk_set_rate: Set cpu0 rate to 151
(bootloader) 2000
(bootloader) [206368] [DEBUG][ACPU] acpuclk_8064_set_rate: Switching from
(bootloader) ACPU0 rate 918000 KHz -> 1512000 KHz
(bootloader) [206603] [DEBUG][ACPU] acpuclk_8064_set_rate: ACPU0 speed ch
(bootloader) ange complete
(bootloader) [206615] Enable hboot boot time perflock
(bootloader) [206637] Disable uart log to speed up boot time
(bootloader) [206648] --pm_check_power_on_status--[210064] pm8921_vreg_di
(bootloader) sable function, vreg_id = 19
(bootloader) [210076] pm8921_vreg_disable function, vreg_id = 24
(bootloader) [210093] m7_vreg_init: enable lvs2 for XB
(bootloader) [220110] pm8921_vreg_disable function, vreg_id = 16
(bootloader) [220177] start block/size of [dzsystem] is different to [sys
(bootloader) tem]. Sync it.
(bootloader) [220193] dzsystem: start block = 1310721; size = 3801086
(bootloader) [220207] Update EBR
(bootloader) [230571] pm8921_vreg_disable function, vreg_id = 15
(bootloader) [230583] pm8921_vreg_disable function, vreg_id = 17
(bootloader) [230595] pm8921_vreg_disable function, vreg_id = 14
(bootloader) [240786] pm8921_vreg_disable function, vreg_id = 13
(bootloader) [460824] PMIC pm8921_fix_charger_lockup
(bootloader) [460878] [ADC] read adc channel VBAT(1):
(bootloader) [470946] [ADC] adc_code = 0x990B, physical=4234 mV
(bootloader) [470980] [BATT] batt_vol=4234 mV current=597 mA FSM=3
(bootloader) [470991] PMIC PMIC charger init by user parameters
(bootloader) [471008] PMIC revision 1: F4
(bootloader) [471023] PMIC revision 2: 6
(bootloader) [471040] PMIC Restart Reason: Triggered from KPD (power key
(bootloader) press)
(bootloader) [471231] PMIC [Batt]pm_chg_failed_clear
(bootloader) [471291] PMIC [Batt] pm8921_chg_hw_init: FSM=3 after clear c
(bootloader) hg fail bit
(bootloader) [471302] PMIC PMIC charger init done
(bootloader) [471313] [BATT]3 cells initiated.
(bootloader) [471343] [PMIC-BMS]r_sense=10 temp_channel=8 id_channel=9
(bootloader) [471355] [ADC] read adc channel BATT_ID(9):
(bootloader) [481422] [ADC] adc_code = 0x7018, physical=384 mV
(bootloader) [481434] [BATT]: cur_cell is initiated
(bootloader) [481446] [PMIC-BMS] set bms_battery_data (cell_id=1).
(bootloader) [501592] [PMIC-BMS]BMS init OK -- ocv = 4233000
(bootloader) [501611] [PMIC-BMS]pm8921_bms_read_ocv_updated_flag: OCV_UPD
(bootloader) ATE_STORAGE = 0x0
(bootloader) [501630] [PMIC-BMS]pm8921_bms_get_ocv_flag: OCV_UPDATE_STORA
(bootloader) GE = 0x0
(bootloader) [501644] radio_is_boot_from_shutdown(): 0, reset_reason=0x77
(bootloader) 6655AA, hw_reason=0x00000000, ocv_hw_reset=0x00000000
(bootloader) [501657] [ADC] read adc channel BATT_THERM(8):
(bootloader) [511727] [ADC] adc_code = 0x7F68, physical=34 mV
(bootloader) [511738] [ADC] read adc channel VBAT(1):
(bootloader) [521807] [ADC] adc_code = 0x9909, physical=4233 mV
(bootloader) [521818] [ADC] read adc channel BATT_ID(9):
(bootloader) [531888] [ADC] adc_code = 0x7017, physical=384 mV
(bootloader) [531918] [ADC] read adc channel BATT_THERM(8):
(bootloader) [541986] [ADC] adc_code = 0x7F68, physical=34 mV
(bootloader) [552077] [PMIC-BMS]P=97, adc_based_ocv=4274856, T=34
(bootloader) [552134] [BATT] V=4233 mV, T=34 C, OCV=4233 mV, ID=384 mV, I
(bootloader) =327 mA, P=97, FSM=3
(bootloader) [552149] radio_boot_mode() poweron_status=0x00000001, reset_
(bootloader) reason=0x776655AA, hw_reason=0x00000000
(bootloader) [652429] E0902910 E0902E20
(bootloader) [742451] usb_init_hw: pull up d+
(bootloader) [772471] m7_set_charging(1)
(bootloader) [772492] m7_hw_reset_nfc
(bootloader) [1002399] m7_init_display
(bootloader) [1003431] m7_init_display ID LCD_ID0=20 LCD_ID1=43
(bootloader) [1004548] m7_init_display ID id0=0 id1=1
(bootloader) [1009560] m7_init_display_panelid_940067
(bootloader) [1009571] SHARP_RENESAS FULL HD panel
(bootloader) [1026649] mdp_clock_init
(bootloader) [1040355] Video Mode
(bootloader) [1062395] mipi_read_back:0 0x21000012
(bootloader) [1084432] mipi_read_back:0 0x21000012
(bootloader) [1106470] mipi_read_back:0 0x21C5002D
(bootloader) [1106481] id1= 0xA0120000, id2= 0xA0120000, id3= 0xA02D00C5
(bootloader) [1115061] M7 sharp renesas cmd panel ID=0x940069
(bootloader) [1115075] mipi_dsi_cmds_tx_ext
(bootloader) [1252175] [CIR] m7_init_cir, enter.
(bootloader) [1252193] [CIR] m7_init_cir, end.
(bootloader) [1252214] chipset_bootmode(): reset_reason=0x776655AA
(bootloader) [1253027] Board_PID : 203
(bootloader) [1253782] [FAT_ERROR] fat_open_file: can not find MDATA.CFG
(bootloader) [1253819] No MDATA.CFG
(bootloader) [1255234] Gyro ID = 0xA5
(bootloader) [1256648] Gyro ID = 0xD4
(bootloader) [1256659] Setting gy_type = 2
(bootloader) [1256670] m7_init is finished: 22:11:14, Dec 2 2014
(bootloader) [1265429] TZ_HTC_SVC_ENC ret = 0
(bootloader) [1266250] TZ_HTC_SVC_ENC ret = 0
(bootloader) [1266309] valid keybox is existed
(bootloader) [1275404] TZ_HTC_SVC_ENC ret = 0
(bootloader) [1285026] TZ_HTC_SVC_ENC ret = 0
(bootloader) [1289604] radio_update_drm_config: read pg2fs_dapkey len (0)
(bootloader) failed
(bootloader) [1294919] chipset_bootmode(): reset_reason=0x776655AA
(bootloader) [1295317] radio_boot_mode() poweron_status=0x00000001, reset
(bootloader) _reason=0x776655AA, hw_reason=0x00000000
(bootloader) [1295813] [SD_ERR] The project does not support SD card
(bootloader) [1296013] E0902910 E0902E20
(bootloader) [1506055] <0>No USB device attached, portsc 0x8C001000
(bootloader) [1506067] <1>usbhost_start failed
(bootloader) [1606084] E0902910 E0902E20
(bootloader) [1696105] usb_init_hw: pull low d+
(bootloader) [1726217] [JAVACARD_ERR] SD/USBDISK Init error
(bootloader) [1726231] [INFO][ACPU] acpuclk_set_rate: Set cpu0 rate to 91
(bootloader) 8000
(bootloader) [1726245] [DEBUG][ACPU] acpuclk_8064_set_rate: Switching fro
(bootloader) m ACPU0 rate 1512000 KHz -> 918000 KHz
(bootloader) [1726495] [DEBUG][ACPU] acpuclk_8064_set_rate: ACPU0 speed c
(bootloader) hange complete
(bootloader) [1726513] Disable hboot boot time perflock
(bootloader) [1726881] ARM11 Boot Mode: 8
(bootloader) [1726897] Platform: HBOOT-8064
(bootloader) [2096435] m7_init_backlight: panel_id=0x940069
(bootloader) [2098462] PWM ic version A2
(bootloader) [2205963] mipi_dsi_cmds_tx_ext
(bootloader) [2307297] E0902910 E0902E20
(bootloader) [2397322] usb_init_hw: pull low d+
(bootloader) [2427346] [SD_ERR] The project does not support SD card
(bootloader) [2427638] E0902910 E0902E20
(bootloader) [2637687] <0>No USB device attached, portsc 0x8C001000
(bootloader) [2637706] <1>usbhost_start failed
(bootloader) [2737733] E0902910 E0902E20
(bootloader) [2827761] usb_init_hw: pull low d+
(bootloader) [2857894]
(bootloader) ###[ Bootloader Mode ]###
(bootloader) [2857909]
(bootloader) hboot>[2857925] m7_set_charging(1)
(bootloader) [8138207] [HBOOT]
(bootloader) [HBOOT]
(bootloader) ###[ RAMDUMP Mode ]###[HBOOT]
(bootloader) [HBOOT]
(bootloader) [8151228] ramdump_show_rst_msg: hboot watchdog bite[HBOOT]
(bootloader) [8151249] ramdump_show_rst_msg: IMEM: 0x776655AA[HBOOT]
(bootloader) [8152578] ramdump_show_rst_msg: PMIC: RESIN_N (0)[HBOOT]
(bootloader) [8902314] Boot/Recovery signature checking...
(bootloader) [9332172] TZ_HTC_SVC_HASH ret = 0
(bootloader) [9445032] setup_tag addr=0x80600100 cmdline add=0x0038164C
(bootloader) [9445051] TAG:Ramdisk OK
(bootloader) [9446156] TAG:skuid 0x34C13
(bootloader) [9446173] TAG:hero panel = 0x940069
(bootloader) [9446190] TAG:engineerid = 0x0
(bootloader) [9446205] TAG: PS ID = 0x0
(bootloader) [9446221] TAG: Gyro ID = 0x2
(bootloader) [9458196] Device CID is not super CID
(bootloader) [9458214] CID is HTC__044
(bootloader) [9458290] setting->cid::HTC__044
(bootloader) [9458578] serial number: HT364W902628
(bootloader) [9473206] cmdline from boot/recovery image header: console=n
(bootloader) one androidboot.hardware=qcom user_debug=31 androidboot.seli
(bootloader) nux=permissive
(bootloader) [9473243] active cmdline length = 926
(bootloader) [9473258] active commandline:
(bootloader) [9473273] poweron_status=1
(bootloader) [9473288] reset_status=0
(bootloader) [9473303] board_m7_ul.disable_uart3=0
(bootloader) [9473318] diag.enabled=0
(bootloader) [9473333] board_m7_ul.debug_uart=0
(bootloader) [9473348] userdata_sel=0
(bootloader) [9473363] androidboot.emmc=true
(bootloader) [9473378] androidboot.pagesize=2048
(bootloader) [9473393] skuid=0
(bootloader) [9473407] ddt=20
(bootloader) [9473421] ats=0
(bootloader) [9473435] dap=6
(bootloader) [9473449] androidboot.lb=1
(bootloader) [9473464] uif=r4Cf
(bootloader) [9473478] td.sf=1
(bootloader) [9473492] td.td=1
(bootloader) [9473506] td.ofs=328
(bootloader) [9473520] td.prd=1
(bootloader) [9473534] td.dly=0
(bootloader) [9473548] td.tmo=300
(bootloader) [9473563] hlog.ofs=628
(bootloader) [9473577] un.ofs=696
(bootloader) [9473592] imc_online_log=0
(bootloader) [9473607] androidboot.efuse_info=2NSL
(bootloader) [9473623] androidboot.baseband=4T.30.3218.21
(bootloader) [9473638] androidboot.cid=HTC__044
(bootloader) [9473653] androidboot.devicerev=3
(bootloader) [9473669] androidboot.batt_poweron=good_battery
(bootloader) [9473685] androidboot.carrier=HTC-Asia-SEA-WWE
(bootloader) [9473701] androidboot.mid=PN0714000
(bootloader) [9473717] androidboot.keycaps=qwerty
(bootloader) [9473732] androidboot.dq=PASS
(bootloader) [9473747] androidboot.mode=recovery
(bootloader) [9473763] androidboot.serialno=HT364W902628
(bootloader) [9473779] androidboot.bootloader=1.54.0000
(bootloader) [9473794] lscd=0x1
(bootloader) [9473808] wificd=0x1
(bootloader) [9473823] androidboot.nledhw=0
(bootloader) [9473838] androidboot.ddrmid=(0x3)
(bootloader) [9473854] acpu.footprint=FFFF09FF
(bootloader) [9473868] abnrst=1
(bootloader) [9473883] bootreason=kernel_panic
(bootloader) [9473898] zygote_oneshot=off
(bootloader) [9473912] kmemleak=off
(bootloader) [9473927] rpm_debug.enable=0
(bootloader) [9473941] console=none
(bootloader) [9473956] androidboot.hardware=qcom
(bootloader) [9473972] user_debug=31
(bootloader) [9473987] androidboot.selinux=permissive
(bootloader) [9474007] setup_all_partition_atag:
(bootloader) [9474030] Partition[0].name=misc
(bootloader) [9474053] Partition[1].name=recovery
(bootloader) [9474077] Partition[2].name=boot
(bootloader) [9474100] Partition[3].name=system
(bootloader) [9474129] Partition[4].name=local
(bootloader) [9474159] Partition[5].name=cache
(bootloader) [9474182] Partition[6].name=userdata
(bootloader) [9474213] Partition[7].name=devlog
(bootloader) [9474235] Partition[8].name=pdata
(bootloader) [9474259] Partition[9].name=extra
(bootloader) [9474282] Partition[10].name=radio
(bootloader) [9474303] Partition[11].name=adsp
(bootloader) [9474324] Partition[12].name=dsps
(bootloader) [9474348] Partition[13].name=radio_config
(bootloader) [9474370] Partition[14].name=modem_st1
(bootloader) [9474392] Partition[15].name=modem_st2
(bootloader) [9474420] Partition[16].name=cdma_record
(bootloader) [9474475] Partition[17].name=reserve_1
(bootloader) [9474498] Partition[18].name=reserve_2
(bootloader) [9474521] Partition[19].name=reserve_3
(bootloader) [9474547] Partition[20].name=reserve
(bootloader) [9474563] Valid partition num=21
(bootloader) [9475354] setting_get_bootmode() = 3
(bootloader) [9481130] smem 84505000 (phy 8F205000): TZ_HTC_SVC_UPDATE_SM
(bootloader) EM ret = 0
(bootloader) [9486725] TZ_HTC_SVC_ENC ret = 0
(bootloader) [9489350] TZ_HTC_SVC_ENC ret = 0
(bootloader) [9490743] TZ_HTC_SVC_DISABLE ret = 205643776 (0xC41E000)
(bootloader) [9540038] [PARTITION_ERR] partition_write_prot_emmc: Cannot
(bootloader) find end partition [modem]
(bootloader) [9540059] msm_mpu_emmc_protect: set write protection fail (f
(bootloader) rom reserve_2 to modem)
(bootloader) [9549735] Start Verify: 3
(bootloader) [9864016] qup_check_OUTPUT_FIFO():TIMEOUT count = 25000, wr_
(bootloader) status:0x110, i2c_status:0x1300C8, qup_error:0x0
(bootloader) [9864037] __i2c_write_NoAddr(): 9 bytes not transmit, slave_
(bootloader) id:0x32
(bootloader) [10144166] qup_check_OUTPUT_FIFO():TIMEOUT count = 25000, wr
(bootloader) _status:0x110, i2c_status:0x1300C8, qup_error:0x0
(bootloader) [10144186] __i2c_write_NoAddr(): 9 bytes not transmit, slave
(bootloader) _id:0x32
(bootloader) [10424315] qup_check_OUTPUT_FIFO():TIMEOUT count = 25000, wr
(bootloader) _status:0x110, i2c_status:0x1300C8, qup_error:0x0
(bootloader) [10424335] __i2c_write_NoAddr(): 9 bytes not transmit, slave
(bootloader) _id:0x32
(bootloader) [10704464] qup_check_OUTPUT_FIFO():TIMEOUT count = 25000, wr
(bootloader) _status:0x110, i2c_status:0x1300C8, qup_error:0x0
(bootloader) [10704484] __i2c_write_NoAddr(): 9 bytes not transmit, slave
(bootloader) _id:0x32
(bootloader) [10984612] qup_check_OUTPUT_FIFO():TIMEOUT count = 25000, wr
(bootloader) _status:0x110, i2c_status:0x1300C8, qup_error:0x0
(bootloader) [10984632] __i2c_write_NoAddr(): 9 bytes not transmit, slave
(bootloader) _id:0x32
(bootloader) [11265872] qup_check_OUTPUT_FIFO():TIMEOUT count = 25000, wr
(bootloader) _status:0x110, i2c_status:0x1300C8, qup_error:0x0
(bootloader) [11265892] __i2c_write_NoAddr(): 9 bytes not transmit, slave
(bootloader) _id:0x32
(bootloader) [11546022] qup_check_OUTPUT_FIFO():TIMEOUT count = 25000, wr
(bootloader) _status:0x110, i2c_status:0x1300C8, qup_error:0x0
(bootloader) [11546042] __i2c_write_NoAddr(): 9 bytes not transmit, slave
(bootloader) _id:0x32
(bootloader) [11826170] qup_check_OUTPUT_FIFO():TIMEOUT count = 25000, wr
(bootloader) _status:0x110, i2c_status:0x1300C8, qup_error:0x0
(bootloader) [11826190] __i2c_write_NoAddr(): 9 bytes not transmit, slave
(bootloader) _id:0x32
(bootloader) [12106318] qup_check_OUTPUT_FIFO():TIMEOUT count = 25000, wr
(bootloader) _status:0x110, i2c_status:0x1300C8, qup_error:0x0
(bootloader) [12106338] __i2c_write_NoAddr(): 9 bytes not transmit, slave
(bootloader) _id:0x32
(bootloader) [12386468] qup_check_OUTPUT_FIFO():TIMEOUT count = 25000, wr
(bootloader) _status:0x110, i2c_status:0x1300C8, qup_error:0x0
(bootloader) [12386488] __i2c_write_NoAddr(): 9 bytes not transmit, slave
(bootloader) _id:0x32
(bootloader) [12392615] [RUMBA_S] I2C error with module
(bootloader) [12402663] pm8921_vreg_disable function, vreg_id = 7
(bootloader) [12412688] pm8921_vreg_disable function, vreg_id = 37
(bootloader) [12432712] pm8921_vreg_disable function, vreg_id = 34
(bootloader) [12442736] pm8921_vreg_disable function, vreg_id = 8
(bootloader) [12463058] jump_to_kernel: machine_id(4308), tags_addr(0x806
(bootloader) 00100), kernel_addr(0x80608000)
(bootloader) [12463078] -------------------hboot boot time:12463 msec
(bootloader) [12463096]
(bootloader) Boot info:
(bootloader) Last boot reason: kernel_panic
(bootloader) [8] check_ramlog_region: Backup last hboot ramlog.
OKAY [ 0.819s]
finished. total time: 0.819s
Here is the RUU that helped me on my M7.
Download the one for your variant:
htc.com/us/support/htc-one/news/ (Unlocked/Developer Edition)
htc.com/us/support/htc-one-t-mobile/news/
htc.com/us/support/htc-one-sprint/news/
htc.com/us/support/htc-one-verizon/news/
htc.com/us/support/htc-one-att/news/
Install it on PC, run application with phone plugged in and you should be back to 5.0.2 with Sense 6