Related
Ok, Ladies and Gentleman I need some deep thought processing here for some help with a Motorola Nexus 6. In brief here is what the problem is, a while back when flashing Pure Nexus rom, I experienced a loss of my IMEI. I can restore my IMEI but if and when I do, I lose any 4g and LTE connectivity. The phone functions in 3g with data and phone etc... just slow as molasses but if I restore my IMEI to the one that doesn't show up my IMEI correctly I get back LTE/4g and all works fine also. I've tried going all the way back to the original firmware which was saved to computer and restoring it. Same thing, I have IMEI but no LTE/4g. restore bad efs and get LTE/4g back. I've tried going through all the factory firmware's and flashing by ADB and or TWRP and nothing firmware wise will allow me to restore the IMEI and have LTE/4g signal. If I restore the bad efs and get OOOOOOOO for IMEI when using the *#06# on any firmware version, I regain LTE/4g functioning! I am using Pure Nexus 7.1 now and can still see the 00000000 as a IMEI, if I restore my efs and get IMEI back showing correctly, no LTE/4g signal! My phone can only function as it should as long as the IMEI doesn't show correctly! I have tried just flashing base bands and other segments of any rom and still the problem persist! I have even tried restoring an EFS from another nexus 6 and still no help. It's not the sims because I've tried AT&T sims and Verizon sims from other phones and it does the same thing! I've tried flashing with a sims in the phone and without. Any ideas??? It's like somehow a correlating segment of a file is not being recognized when the correct IMEI is present, like some thing some where in the efs, IMEI, and radio are not taking to each other so to speak, unless it shows the zero's! Brain waves come on and help me out here!!
Have you tried doing a fresh install of a complete factory nexus image? (i.e. entirely wiping the device)
jbaumert said:
Have you tried doing a fresh install of a complete factory nexus image? (i.e. entirely wiping the device)
Click to expand...
Click to collapse
Thanks, and Yes, about 30 different times, using Google developer site original factory firmware, using ADB and or TWRP all the way back to original image, which I have saved as I said in the original post! I don't have a problem restoring IMEI it's just if I do, the phone will not connect to LTE/4g no way no how. I have to have a "0" IMEI for the phone to function as it should actually function and the LTE/4g radio to work, something strange is a miss!
TheWacoKid said:
Thanks, and Yes, about 30 different times, using Google developer site original factory firmware, using ADB and or TWRP all the way back to original image, which I have saved as I said in the original post! I don't have a problem restoring IMEI it's just if I do, the phone will not connect to LTE/4g no way no how. I have to have a "0" IMEI for the phone to function as it should actually function and the LTE/4g radio to work, something strange is a miss!
Click to expand...
Click to collapse
Alrighty, no need to yell.... The factory image is flashed with "fastboot" NOT adb or TWRP. Just wanted to clarify how you were returning the phone to stock.
jbaumert said:
Alrighty, no need to yell.... The factory image is flashed with "fastboot" NOT adb or TWRP. Just wanted to clarify how you were returning the phone to stock.
Click to expand...
Click to collapse
Yes I said thanks because I was yelling! Jezz, get a grip THIS IS YELLING! ADB/Fastboot both tools are used to flash, extract etc.. with your computer, so obviously one cannot flash/restore etc... without using the proper tools via computer!
Try this:
1) Install "Change APN" app from Google store
2) Open ChangeAPN and click the "option" ( the 3 vertical dots) in the upper right-hand corners.
3) click "reset to default"
4) exit the app
5) perform carrier reset ##3282#
6)If needed: after the phone reboots, perform PRL/Device config update. That's it and you should have LTE data.
Dixon Butz said:
Try this:
1) Install "Change APN" app from Google store
2) Open ChangeAPN and click the "option" ( the 3 vertical dots) in the upper right-hand corners.
3) click "reset to default"
4) exit the app
5) perform carrier reset ##3282#
6)If needed: after the phone reboots, perform PRL/Device config update. That's it and you should have LTE data.
Click to expand...
Click to collapse
Thanks! Ok, Itried that, restored my IMEI, "reset APN to default" Tried Carrier reset ##3282# and it says "NO Cellular Network" even though I am showing my network and 3G. So, I rebooted and same thing, went to PRL and tried to update and it says "update error" but it will refresh!
TheWacoKid said:
Yes I said thanks because I was yelling! Jezz, get a grip THIS IS YELLING! ADB/Fastboot both tools are used to flash, extract etc.. with your computer, so obviously one cannot flash/restore etc... without using the proper tools via computer!
Click to expand...
Click to collapse
You clearly don't know the difference between a recovery, the bootloader and the operating system.
ADB is used when the phone is on and is not how you flash a factory image. Fastboot is used in the bootloader and is the proper method of restoring to factory.
admiralspeedy said:
You clearly don't know the difference between a recovery, the bootloader and the operating system.
ADB is used when the phone is on and is not how you flash a factory image. Fastboot is used in the bootloader and is the proper method of restoring to factory.
Click to expand...
Click to collapse
No, I guess not, that's how I've been flashing, restoring and unbricking cells for years, I just don't understand anything!
TheWacoKid said:
No, I guess not, that's how I've been flashing, restoring and unbricking cells for years, I just don't understand anything!
Click to expand...
Click to collapse
You know some magic we don't? There is no way you've flashed a ROM with ADB...
@admiralspeedy
I was very gratified when I noticed that I'd overnight become a Senior Member - until I realised that it had nothing to do with the wisdom I'd imparted in my posts, but only that I'd posted 100. So seniority doesn't imply knowledge, which I think you're beginning to demonstrate in this thread as well as in another where I've seen this same strange unnecessarily belligerent attitude.
TheWacoKid is asking for help, which I'd be happy to offer if I had any ideas. I feel absolutely no desire to tell him that he has no idea what he's doing. And nor should you.
Stop trolling and become a properly-active member of the community.
dahawthorne said:
@admiralspeedy
I was very gratified when I noticed that I'd overnight become a Senior Member - until I realised that it had nothing to do with the wisdom I'd imparted in my posts, but only that I'd posted 100. So seniority doesn't imply knowledge, which I think you're beginning to demonstrate in this thread as well as in another where I've seen this same strange unnecessarily belligerent attitude.
TheWacoKid is asking for help, which I'd be happy to offer if I had any ideas. I feel absolutely no desire to tell him that he has no idea what he's doing. And nor should you.
Stop trolling and become a properly-active member of the community.
Click to expand...
Click to collapse
Actually, I wouldn't have jumped on him like that if he hadn't come out swinging with snarky comments when people tried to help him.
admiralspeedy said:
You know some magic we don't? There is no way you've flashed a ROM with ADB...
Click to expand...
Click to collapse
Look, I came on here to discuss a situation and or problem, which is what I thought this web site was known for, which I havent run into before, in that way not only do I get some help and or suggestions which might help me but help others at the same time who might have the same problem and or will have in the future and find possible solutions! If you don't have anything positive to add to the conversation/situation/problem at hand you are wasting my time, others time and most of all just making a fool out of yourself being childish and immature. Most on here come for solutions not looking to nitpick and try and belittle others like they know everything, which you don't, otherwise you would have given a solution! So you can continue to act like a troll or just leave the situation be and by the way, you ever hear of ADB Sideload??
Use method 2 , you will get everything definitely
https://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
TheWacoKid said:
Look, I came on here to discuss a situation and or problem, which is what I thought this web site was known for, which I havent run into before, in that way not only do I get some help and or suggestions which might help me but help others at the same time who might have the same problem and or will have in the future and find possible solutions! If you don't have anything positive to add to the conversation/situation/problem at hand you are wasting my time, others time and most of all just making a fool out of yourself being childish and immature. Most on here come for solutions not looking to nitpick and try and belittle others like they know everything, which you don't, otherwise you would have given a solution! So you can continue to act like a troll or just leave the situation be and by the way, you ever hear of ADB Sideload??
Click to expand...
Click to collapse
I'm "belittling" you because your first two replies to someone who tried to help you were snarky and rude. In your own words, get a grip.
admiralspeedy said:
Actually, I wouldn't have jumped on him like that if he hadn't come out swinging with snarky comments when people tried to help him.
Click to expand...
Click to collapse
Time for you to go back and read some more...
You can flash a ROM with adb... Now unless you can help him... Shaddyup
rignfool said:
Time for you to go back and read some more...
You can flash a ROM with adb... Now unless you can help him... Shaddyup
Click to expand...
Click to collapse
No, you can use ADB sideload to flash a ROM which requires you to be in the recovery. Standard ADB cannot be used to flash a ROM.
admiralspeedy said:
I'm "belittling" you because your first two replies to someone who tried to help you were snarky and rude. In your own words, get a grip.
Click to expand...
Click to collapse
Amazing to any one with half a brain how you a Troll can think from typed response that someone is yelling, swinging, snarky and rude but your the one with an attitude that is all the above because like I said your a childish troll! I can't believe this site would even allow someone like you to be a member paid or otherwise! Your attitude is all your own and based on your own weak assumptions! Now go back to playing with your legos!
drmuruga said:
Use method 2 , you will get everything definitely
https://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008
Click to expand...
Click to collapse
Thanks, I've used both of those methods, I have even tried just flashing individual parts all by themselves to see if just one part would give an error of some kind while flashing, no errors on any flash of any kind, the only difference being that if I read them correctly that on those methods it said to wipe data factory reset in recovery, before reboot, the Flashall bat file reboots automatically into image just flashed, I usually reboot as last command, if that makes any difference, I've even tried wiping then just flashing the new bootloader after a wipe, because it basically acts like a security checkpoint and partition manager, then rebooting and flashing the rest of one of the google firmware versions for the nexus 6.
TheWacoKid said:
Thanks, I've used both of those methods, I have even tried just flashing individual parts all by themselves to see if just one part would give an error of some kind while flashing, no errors on any flash of any kind, the only difference being that if I read them correctly that on those methods it said to wipe data factory reset in recovery, before reboot, the Flashall bat file reboots automatically into image just flashed, I usually reboot as last command, if that makes any difference, I've even tried wiping then just flashing the new bootloader after a wipe, because it basically acts like a security checkpoint and partition manager, then rebooting and flashing the rest of one of the google firmware versions for the nexus 6.
Click to expand...
Click to collapse
So was there a solution? The thread just ended. I also have this problem but I'm no where as technical as thewacokid.
But I do know how to follow steps
Symptoms
-No IMEI and no Baseband
Both say unknown.
-No signal bars
-No sim detected (with or without sim card)
-Top right gets very hot hot at times
-Battery drains pretty fast
What I've tried
-Downgrade to 4.4
- Different play-store apps
- Different modems and radios
- IMEI writers etc
-Custom roms
-Same as above with no avail
-Stock roms
-4.4 stock
-5.0 stock
-Youtube
-All types of things in videos except octoplus or whatever its called.
Please help
You have an n900a? If yes, where did you get the 4.4 and 5.0 stock ROMs? They were never released by AT&T.
audit13 said:
You have an n900a? If yes, where did you get the 4.4 and 5.0 stock ROMs? They were never released by AT&T.
Click to expand...
Click to collapse
I used custom roms off XDA hoping it would somehow recover missing IMEI
Is the phone an n900a?
Yes SM-n900a
Made in China
If the stock roms don't restore imei and baseband, the efs folder may be damaged. A completely stock flash may be done via JTAG.
audit13 said:
If the stock roms don't restore imei and baseband, the efs folder may be damaged. A completely stock flash may be done via JTAG.
Click to expand...
Click to collapse
JTAG
Long time since I've heard that.
Wish there was something I could do on my own. I was hoping maybe just a modem flash.
I'll standby for a few more days then if nothing I'll start looking into what they could do.
Where did you get the stock 4.4 and 5.0 ROMs?
Here on XDA
audit13 said:
Where did you get the stock 4.4 and 5.0 ROMs?
Click to expand...
Click to collapse
I believe they were both from the unified threads.
you can find 4.4.2 stock on here
then 4.4.4 and 5.0 were based on official release.
Update
Still have no clue whats wrong
Either something is really wrong on the software side of the phone beyond Odin (maybe JTAG)
OR
The Sim card slot on the phone is damaged.
The phone was given to me because the old owner was never ever to get it working and gave up.
I have the IMEI on a sticker located on the back.
(Yes I know discussion about changing IMEI etc is banned that's not what I'm here for)
My main question is what can be done if I don't have an EFS back up? Is the phone just a softbrick/parts
If so plan forward is just to use as a car dock lol.
I am in the same boat man. I do not know what to do, to get my imei back and baseband. i posted a thread as well similar to yours hopefully one of us gets a success story!!!!!!
jjta said:
Still have no clue whats wrong
Either something is really wrong on the software side of the phone beyond Odin (maybe JTAG)
OR
The Sim card slot on the phone is damaged.
The phone was given to me because the old owner was never ever to get it working and gave up.
I have the IMEI on a sticker located on the back.
(Yes I know discussion about changing IMEI etc is banned that's not what I'm here for)
My main question is what can be done if I don't have an EFS back up? Is the phone just a softbrick/parts
If so plan forward is just to use as a car dock lol.
Click to expand...
Click to collapse
Willcruz82 said:
I am in the same boat man. I do not know what to do, to get my imei back and baseband. i posted a thread as well similar to yours hopefully one of us gets a success story!!!!!!
Click to expand...
Click to collapse
The first step would be to try to find the proper basebands. Dont know where any of the firms are located. Im trying to dig them all up. And reupload them but may take some days. I am hoping to temperarelly revive this device as i have gotton one myself.
Best of luck
TheMadScientist said:
The first step would be to try to find the proper basebands. Dont know where any of the firms are located. Im trying to dig them all up. And reupload them but may take some days. I am hoping to temperarelly revive this device as i have gotton one myself.
Click to expand...
Click to collapse
My goal as of now is to find a t mobile 1 with a broken screen and switch boards. Done with the boot loader being locked.
I was instructed to do 1 of 2 things... 1st like you said buy a busted up phone with a good logic board and swap. OR 2- buy that same junk Note3 and copy the efs files and install them into your phone and switch the imei to yours. etc... I gave up on trying to revive mine so I no longer can tell you if it works or not but it seems to be the best 2 options friend... good luck let me know if you get it with one of the options....
So one evening i was flashing a test build of a popular rom, there was some failure and i got black screen on boot. No big deal, i flashed previous build and all was ok till i noticed my volte icon had not reappeared.
I always had volte working on aosp roms and miui (after putting in dialpad code) but now its been a week and it hasnt returned.
What i have done to try and fix (unssucessfully)it in order
1) format data clean flash vendor firnware and aosp rom
2) use mi flash to flash latest stable 11.0.5.0 cn rom (i have a china phone)
3) flashed older pie miui builds, used dialpad code, waited an hour+ and no volte came.
3) other sims in my phone dont get volte anymore, the carrier said the phone is telling my sim it doesnt use volte.
4) I found an old twrp backup I had with efs, modem and persist backuo from months ago, restoring dint help.
5)added apn with ims, dint help
6) flashing global vendor/firmware, updating cn vendor/firnware
Anyone have any idea how to get the function back? Here are some pics to give more info.
When I make calls LTE turns to H, and if i put only LTE, i cant make or get calls
75 views not one person has any suggestion or comment?
Mooatreides said:
75 views not one person has any suggestion or comment?
Click to expand...
Click to collapse
I can't talk for anyone else, but from my point of view, I can't think of anything else to suggest, beyond what you've already tried. I don't have much knowledge on the radio side of things and the different partitions dedicated to the radio.
Robbo.5000 said:
I can't talk for anyone else, but from my point of view, I can't think of anything else to suggest, beyond what you've already tried. I don't have much knowledge on the radio side of things and the different partitions dedicated to the radio.
Click to expand...
Click to collapse
Thanks, well at least i know i need to learn about that n see how to update radio partitions. Maybe LR twrp can
My IMEI is fine and i canmake calls, get sms and use data, its just volte.
Bamp
Has anyone else experienced this?
Mi 9 t pro isn't supposed by my carrier but it's activated in my sim .
All i have to do is add these lines to build.prop ...
surprisingly it works I have tested it.
persist.dbg.ims_volte_enable=1
persist.dbg.volte_avail_ovr=1
persist.dbg.vt_avail_ovr=1
persist.dbg.wfc_avail_ovr=1
persist.radio.rat_on=combine
persist.radio.data_ltd_sys_ind=1
persist.radio.data_con_rprt=1
persist.radio.calls.on.ims=1
ergysramaj said:
Mi 9 t pro isn't supposed by my carrier but it's activated in my sim .
All i have to do is add these lines to build.prop ...
surprisingly it works I have tested it.
persist.dbg.ims_volte_enable=1
persist.dbg.volte_avail_ovr=1
persist.dbg.vt_avail_ovr=1
persist.dbg.wfc_avail_ovr=1
persist.radio.rat_on=combine
persist.radio.data_ltd_sys_ind=1
persist.radio.data_con_rprt=1
persist.radio.calls.on.ims=1
Click to expand...
Click to collapse
Ill try now mannn
Mooatreides said:
Ill try now mannn
Click to expand...
Click to collapse
There is also this post that may help https://c.mi.com/thread-2421275-1-0.html
I personally haven't tried all those modifications to build.prop as this guy has but he seems to know somethings.
Good luck
ergysramaj said:
There is also this post that may help https://c.mi.com/thread-2421275-1-0.html
I personally haven't tried all those modifications to build.prop as this guy has but he seems to know somethings.
Good luck
Click to expand...
Click to collapse
Does it matter where I place the lines in buildprop? It had no effect. Ill check this link now thanks!
Mooatreides said:
Does it matter where I place the lines in buildprop? It had no effect. Ill check this link now thanks!
Click to expand...
Click to collapse
I placed mine on the bottom .
Strange thing is that on your screenshot you have volte on . On my phone i have it off and im unable to turn it on without the build.prop mod.
You may have conflicting lines on build.prop or blocking lines. Maybe something else entirely , try not to brick your phone lol. Volte not worth it
ergysramaj said:
I placed mine on the bottom .
Strange thing is that on your screenshot you have volte on . On my phone i have it off and im unable to turn it on without the build.prop mod.
You may have conflicting lines on build.prop or blocking lines. Maybe something else entirely , try not to brick your phone lol. Volte not worth it
Click to expand...
Click to collapse
I can turn it on but the carrier says my phone cant use volte, even though it already did since i had it.
ergysramaj said:
There is also this post that may help https://c.mi.com/thread-2421275-1-0.html
I personally haven't tried all those modifications to build.prop as this guy has but he seems to know somethings.
Good luck
Click to expand...
Click to collapse
Dint work,,, I have no idea what else to do, i flashed 11.0.5.0 cn with miflash yesterday and hopes, stayed on it an hour, disabled carrier vokte check and icon never came even with lte+.
You may need to try with a different volte network and see if it works, and try different combos like this example on this screenshot
Also try this https://xiaomi.eu/community/threads/k20-mi9t-volte-solution.54044/
ergysramaj said:
You may need to try with a different volte network and see if it works, and try different combos like this example on this screenshot
Click to expand...
Click to collapse
I dint really know what all this is,, ill try and find another sim to try but its coronaland here.
ergysramaj said:
Also try this https://xiaomi.eu/community/threads/k20-mi9t-volte-solution.54044/
Click to expand...
Click to collapse
Ill try this but im on derpfest so lets see if i can in aosp rom cuz ots for miui here
ergysramaj said:
Also try this https://xiaomi.eu/community/threads/k20-mi9t-volte-solution.54044/
Click to expand...
Click to collapse
I get "no modem config file" error
Mooatreides said:
I get "no modem config file" error
Click to expand...
Click to collapse
For some reason i get the same but my volte works
ergysramaj said:
For some reason i get the same but my volte works
Click to expand...
Click to collapse
Well then I have no idea, way above my skill level and the dev who made the test build that caused this is too sensitive to even help.
Hi there,
after flashing an ebw version (since there seems to be no androind 10 ua version) on my v405ua i get this error/warning message everytime i boot up the phone, which says "current Version is not available for user. Can't find matched carrier. Check NT-Code ....."
How do i fix this Warning ? Since basically everything seems to work as usual, my lte wifi 5 etc. all work just fine. Except for when im in the NL i cant get an internet connection through the mobile network, is says something is wrong with my apn settings.
Help is much appreciated, and thanks in advance.
Gurkenbeat said:
Hi there,
after flashing an ebw version (since there seems to be no androind 10 ua version) on my v405ua i get this error/warning message everytime i boot up the phone, which says "current Version is not available for user. Can't find matched carrier. Check NT-Code ....."
How do i fix this Warning ? Since basically everything seems to work as usual, my lte wifi 5 etc. all work just fine. Except for when im in the NL i cant get an internet connection through the mobile network, is says something is wrong with my apn settings.
Help is much appreciated, and thanks in advance.
Click to expand...
Click to collapse
The NT-Error code thing has been discussed quite a bit, as it's very common to anyone that has cross-flashed. There are various things people have done and some have worked for some, but not others.
First, it's not a problem, it's just something that shows up when u boot up, after that it's inconsequential. *But*, I found that if I did a Lgup partition DL of the rom (that I wanted to cross flash to), let it boot up, then shut it off. Then do a 'Refurbish' with the exact same rom. Then I'd no longer have the NT-Error code show up.
As far as the mobile data goes, just verify what the apn settings should be, it may be as simple as that.
cheers
Would a "reflash" to an ua version solve the problem ?
for example there seems to be a verizon version of the 405ua available, would that solve the nt warning ?
Gurkenbeat said:
Would a "reflash" to an ua version solve the problem ?
for example there seems to be a verizon version of the 405ua available, would that solve the nt warning ?
Click to expand...
Click to collapse
No
AsItLies said:
The NT-Error code thing has been discussed quite a bit, as it's very common to anyone that has cross-flashed. There are various things people have done and some have worked for some, but not others.
First, it's not a problem, it's just something that shows up when u boot up, after that it's inconsequential. *But*, I found that if I did a Lgup partition DL of the rom (that I wanted to cross flash to), let it boot up, then shut it off. Then do a 'Refurbish' with the exact same rom. Then I'd no longer have the NT-Error code show up.
As far as the mobile data goes, just verify what the apn settings should be, it may be as simple as that.
cheers
Click to expand...
Click to collapse
Unfortunatley, this didn't work for me but I'm planning on LOS where the error goes away. I just wonder if this causes my SafetyNet to fail?
FreeSoftwareServers said:
Unfortunatley, this didn't work for me but I'm planning on LOS where the error goes away. I just wonder if this causes my SafetyNet to fail?
Click to expand...
Click to collapse
No, it doesn't cause safetynet to fail, they are completely different things.
AsItLies said:
The NT-Error code thing has been discussed quite a bit, as it's very common to anyone that has cross-flashed. There are various things people have done and some have worked for some, but not others.
First, it's not a problem, it's just something that shows up when u boot up, after that it's inconsequential. *But*, I found that if I did a Lgup partition DL of the rom (that I wanted to cross flash to), let it boot up, then shut it off. Then do a 'Refurbish' with the exact same rom. Then I'd no longer have the NT-Error code show up.
As far as the mobile data goes, just verify what the apn settings should be, it may be as simple as that.
cheers
Click to expand...
Click to collapse
What partitions do I select?
blowtorchhonor said:
What partitions do I select?
Click to expand...
Click to collapse
If you're doing a part D/L select all but ftm. After it reboots, go to Lgup mode again and do a 'refurbish' with the same kdz.
Most of the time that gets rid of the nt code thing.
cheers
AsItLies said:
If you're doing a part D/L select all but ftm. After it reboots, go to Lgup mode again and do a 'refurbish' with the same kdz.
Most of the time that gets rid of the nt code thing.
cheers
Click to expand...
Click to collapse
Thank you so much for the quick reply! I flashed to the latest OPEN_EU ROM and now I can't flash back to anything else, hopefully I don't have to if the NT message can be removed.
blowtorchhonor said:
Thank you so much for the quick reply! I flashed to the latest OPEN_EU ROM and now I can't flash back to anything else, hopefully I don't have to if the NT message can be removed.
Click to expand...
Click to collapse
I was unable to do a refurbish after the DL. It said unable to cross flash V405UA to V405. Message is still present.
blowtorchhonor said:
I was unable to do a refurbish after the DL. It said unable to cross flash V405UA to V405. Message is still present.
Click to expand...
Click to collapse
When u get that crossflash issue u have to use a different version of lgup. If you look in the 'guides' forum, there will be links to (I believe it's) ver 1.16, a newer version that will work with newer versions of the roms.
cheers
AsItLies said:
When u get that crossflash issue u have to use a different version of lgup. If you look in the 'guides' forum, there will be links to (I believe it's) ver 1.16, a newer version that will work with newer versions of the roms.
cheers
Click to expand...
Click to collapse
I was using an outdated common DLL, thanks for helping me! Let's see if this works!
blowtorchhonor said:
I was using an outdated common DLL, thanks for helping me! Let's see if this works!
Click to expand...
Click to collapse
Nope
I have this message that pops up on my V450VM. I assume it was related to Navigation Gestures that I used, and loved, on my V405QA7. When activating and setting it up, my V50 downloaded Nav Gestures from backup and when the phone updated to A11 I found the app was incompatible. I deleted the app and key. Ever since, rebooting has brought up the notification and I assume something didn't delete from the app. Guess I may have been wrong. I'm living with it and it doesn't seem to cause any issues but my OCD flares everytime :/
Hello there.
I've got another problem with my lancelot. I've managed to rooted it successfully and install waveos, however, I still got an issue with no gsm data. I've found out, that my imei is missing - after typing *#06# phone shows you only hex serial number. It also does not show anything in system page in options.
I've read something about and tried to put back original imei back from the sticker. However, hydratool cannot open mtk module - it opens and before it is even able to load itself fully, it forceclose with no errors in log (it is the only module that it cannot open, rest works fine XDn't) and rest of the "tools" are simply crap.
What can I do? I did not have imei even when rolled back to miui 12 (I though it might be the issue, but it is not).
Here is a nice full guide that searching it certainly took less than writing this post ==> done by VD171
Make sure to thank him if you successfully solve the issue.
On a side note: Learn how to search stuff, it will save a lot of time for you and others.
XDHx86 said:
On a side note: Learn how to search stuff, it will save a lot of time for you and others.
Click to expand...
Click to collapse
You are definitelly right. I simply spend whole day on this and got actually tired of looking stuff, that leads to paid solution. I've even though of manual editing corrupted parts of rom (nvram etc), have working nvram from other phone as a correct matrix to do so.
Hope it works, I'll try it tommorow.
buczek0711 said:
You are definitelly right. I simply spend whole day on this and got actually tired of looking stuff, that leads to paid solution. I've even though of manual editing corrupted parts of rom (nvram etc), have working nvram from other phone as a correct matrix to do so.
Hope it works, I'll try it tommorow.
Click to expand...
Click to collapse
To edit nvram partition you need to flash engineering ROM first.
Hydra tool works, but it only works on engineering ROM, like I just said. And it's actually one of the main tools to fix IMEI.
Also Hydra tool isn't paid, what are you talking about?
XDHx86 said:
To edit nvram partition you need to flash engineering ROM first.
Hydra tool works, but it only works on engineering ROM, like I just said. And it's actually one of the main tools to fix IMEI.
Also Hydra tool isn't paid, what are you talking about?
Click to expand...
Click to collapse
Hydra ain't paid? That's good to know. I've got problem starting it though, mtk exe forced close itself before it loaded itself with no errors in logs, so I gave it up. I'll not have time today to do anything here, but I'll try in the following days.
I just assumed that changing imei is paid, just like getting rid of simlock years away.