stuck on white logo htc (not bootloop) - Sprint HTC One (M7)

tried a lot of custom roms, ruu, flashing by fastboot i've the same problem, i can see the lockscreen, bar but when i unlock phone all i can see is this logo htc, exact same like in bootloop, dont know what should i do, any ideas?

jeffseid6 said:
tried a lot of custom roms, ruu, flashing by fastboot i've the same problem, i can see the lockscreen, bar but when i unlock phone all i can see is this logo htc, exact same like in bootloop, dont know what should i do, any ideas?
Click to expand...
Click to collapse
I didn't want to leave this unanswered and was hoping someone would have ideas. If you've successfully run the RUU and the phone reboots but still has problems, then I'm not sure what else to do. Resetting to stock via the RUU should fix all software issues AFAIK.

I'm running into similar issues trying to put the phone back to stock. I've tried RUU and just about everything else. Nothing I do works. Anyone have any suggestions?

Htc one A9 firmware flashing problem
htc one a9 (model: 2PQ9100) see the error below i'm facing please help me i am very upset
C:\adb>fastboot oem rebootRUU
...
OKAY [ 0.047s]
finished. total time: 0.048s
C:\adb>fastboot flash zip firmware.zip
target reported max download size of 1166400000 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 617001178 is not a multiple of the block size 4096
sending sparse 'zip' (1139061 KB)...
error: write_sparse_skip_chunk: don't care size 617001178 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 617001178 is not a multiple of the block size 4096
OKAY [ 53.554s]
writing 'zip'...
(bootloader) HOSD CL#853511
(bootloader) ERR lzipv2_init : Cannot open file /dev/fastboot_download_z
(bootloader) EOonp
(bootloader) ERR [SD_UPDATE_ERR] update_fb_ZIP_buf: can not find ZIP hea
(bootloader) der
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 22
(bootloader) ERR Update zip file failed.
(bootloader) ERR ZIP ERROR, exit read zip loop
(bootloader) ERR ZIP signature checking failed...
(bootloader) Update zip file OK
(bootloader) ERR ZIP ERROR CODE, 22
(bootloader) [email protected]
FAILED (remote: 22 RU_HEADER_ERROR )
finished. total time: 91.572s

Related

[Q] Can't seem to get any rom to work. A beer to whomever can help me out!

I've tried a number of different combinations to get my HTC One running on a custom ROM, and none of them seem to work.
S-ON
HBOOT=1.56.0000
Click to expand...
Click to collapse
I've tried using both TWRP and CWM, and tried installing both the latest Viper and Bad Boyz roms. Regardless, installation completes successfully (apparently) and the phone reboots. It gets past the loading screen, then to a locked home screen. Upon unlock, all I see is a white screen with the HTC logo.
Sometimes, I'll get a dialog with the following error:
Process com.htc.htcdialer isn't responding
Click to expand...
Click to collapse
The phone then reboots itself, and the cycle begins again.
I will happily through a beer, coffee, or other beverage of choice (or equivalent) to whomever is able to help me out. Thank you!
You did do a full wipe in recovery correct? I've flashed both of those no problem.
Sent from my HTCONE using Tapatalk
Bairdog35 said:
You did do a full wipe in recovery correct? I've flashed both of those no problem.
Click to expand...
Click to collapse
I have, yes. Does not appear to make a difference, unfortunately. Performed full wipes, made sure to wipe both caches upon install, still stuck.
kadjar said:
I have, yes. Does not appear to make a difference, unfortunately. Performed full wipes, made sure to wipe both caches upon install, still stuck.
Click to expand...
Click to collapse
You are using a Sprint HTC one correct? May be a stupid question for me to ask, but you'd be surprised how easily people get lost here!
Sent from my HTCONE using Tapatalk
Bairdog35 said:
You are using a Sprint HTC one correct? May be a stupid question for me to ask, but you'd be surprised how easily people get lost here!
Click to expand...
Click to collapse
I am indeed I appreciate you making sure! I can't help but wonder if I did something similarly dumb to bungle this thing.
kadjar said:
I am indeed I appreciate you making sure! I can't help but wonder if I did something similarly dumb to bungle this thing.
Click to expand...
Click to collapse
You are in a pickle haha, this is what I would do. If your phone is not in a working state, RUU back to stock, then unlock the boot loader again, flash TWRP recovery, try flashing your Rom of choice. I bet after that process your Rom will boot and run just fine.
Sent from my HTCONE using Tapatalk
Bairdog35 said:
You are in a pickle haha, this is what I would do. If your phone is not in a working state, RUU back to stock, then unlock the boot loader again, flash TWRP recovery, try flashing your Rom of choice. I bet after that process your Rom will boot and run just fine.
Click to expand...
Click to collapse
Darn. Do you happen to know if there's any way to RUU on a mac? Everything I've seen so far seems to utilize a .exe
I would also re-download your ROM/S you wish to try, it's amazing how easily an error can come from the download itself and not show up until it's flashed
Process of Elimination.
Bashing away at my HTC Desire C
kadjar said:
I've tried a number of different combinations to get my HTC One running on a custom ROM, and none of them seem to work.
I've tried using both TWRP and CWM, and tried installing both the latest Viper and Bad Boyz roms. Regardless, installation completes successfully (apparently) and the phone reboots. It gets past the loading screen, then to a locked home screen. Upon unlock, all I see is a white screen with the HTC logo.
Sometimes, I'll get a dialog with the following error:
The phone then reboots itself, and the cycle begins again.
I will happily through a beer, coffee, or other beverage of choice (or equivalent) to whomever is able to help me out. Thank you!
Click to expand...
Click to collapse
try reflashing the latest radio with twrp recovery, you can find them in flashable zips here in the threads.
kadjar said:
Darn. Do you happen to know if there's any way to RUU on a mac? Everything I've seen so far seems to utilize a .exe
Click to expand...
Click to collapse
Man this is just not your day haha
Download this http://www.androidfilehost.com/?fid=23329332407573774
Unzip it, you will find Rom.zip inside the folder.
I'm assuming you have fastboot working on your Mac
Reboot your phone into boot loader, select fastboot, plug into Mac.
Make sure you relock your boot loader.
Move that Rom.zip into the folder that fastboot is found on mac.
Type the following commands
1. fastboot oem rebootRUU
2. fastboot flash zip rom.zip
3. fastboot flash zip rom.zip
4. fastboot reboot
Yes you need to do fastboot flash zip Rom.zip twice, it will fail the first time.
Let it do its thing then reboot. You should have your phone back to stock!
Sent from my HTCONE using Tapatalk
Followed your instructions, but it seems to be failing (more than once)
Any guesses as to what I'm doing wrong?
Code:
➜ platform-tools ./fastboot oem lock
...
(bootloader) Lock successfully...
(bootloader) mipi display off
(bootloader) mipi_dsi_cmds_tx_ext
(bootloader) pm8921_vreg_disable function, vreg_id = 38
(bootloader) pm8921_vreg_disable function, vreg_id = 1
(bootloader) TZ_HTC_SVC_DISABLE ret = 534642044 (0x1FDDFD7C)
(bootloader) Use PSHOLD to reset device.
ERROR: usb_read failed with status e00002c0
FAILED (status read failed (No such file or directory))
finished. total time: 1.131s
➜ platform-tools ./fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.035s]
finished. total time: 0.035s
➜ platform-tools ./fastboot flash zip /Users/garrett/Dev/android/stock.zip
target reported max download size of 1514139648 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 120085191 is not a multiple of the block size 4096
sending sparse 'zip' (1476856 KB)...
error: write_sparse_skip_chunk: don't care size 120085191 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 120085191 is not a multiple of the block size 4096
OKAY [ 86.741s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 237.804s
➜ platform-tools ./fastboot flash zip /Users/garrett/Dev/android/stock.zip
target reported max download size of 1514139648 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 124279495 is not a multiple of the block size 4096
sending sparse 'zip' (1478186 KB)...
error: write_sparse_skip_chunk: don't care size 124279495 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 124279495 is not a multiple of the block size 4096
OKAY [ 70.744s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 222.003s
➜ platform-tools ./fastboot flash zip /Users/garrett/Dev/android/stock.zip
target reported max download size of 1514139648 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 128047815 is not a multiple of the block size 4096
sending sparse 'zip' (1476924 KB)...
error: write_sparse_skip_chunk: don't care size 128047815 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 128047815 is not a multiple of the block size 4096
OKAY [ 69.791s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 220.860s
Your fastboot exe may be bad, try installing from this thread - http://forum.xda-developers.com/showthread.php?t=2588979
Bairdog35 said:
Man this is just not your day haha
Download this http://www.androidfilehost.com/?fid=23329332407573774
Unzip it, you will find Rom.zip inside the folder.
I'm assuming you have fastboot working on your Mac
Reboot your phone into boot loader, select fastboot, plug into Mac.
Make sure you relock your boot loader.
Move that Rom.zip into the folder that fastboot is found on mac.
Type the following commands
1. fastboot oem rebootRUU
2. fastboot flash zip rom.zip
3. fastboot flash zip rom.zip
4. fastboot reboot
Yes you need to do fastboot flash zip Rom.zip twice, it will fail the first time.
Let it do its thing then reboot. You should have your phone back to stock!
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
You, sir, I owe a beer. Back up and running on stock, managed to root stock as well. PM me your paypal?
kadjar said:
You, sir, I owe a beer. Back up and running on stock, managed to root stock as well. PM me your paypal?
Click to expand...
Click to collapse
Seems you found it, thank you greatly. If you need anything, don't be afraid to pm me
Sent from my HTCONE using Tapatalk
Htc one A9 firmware flashing problem
htc one a9 (model: 2PQ9100) see the error below i'm facing please help me i am very upset :crying:
C:\adb>fastboot oem rebootRUU
...
OKAY [ 0.047s]
finished. total time: 0.048s
C:\adb>fastboot flash zip firmware.zip
target reported max download size of 1166400000 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 617001178 is not a multiple of the block size 4096
sending sparse 'zip' (1139061 KB)...
error: write_sparse_skip_chunk: don't care size 617001178 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 617001178 is not a multiple of the block size 4096
OKAY [ 53.554s]
writing 'zip'...
(bootloader) HOSD CL#853511
(bootloader) ERR lzipv2_init : Cannot open file /dev/fastboot_download_z
(bootloader) EOonp
(bootloader) ERR [SD_UPDATE_ERR] update_fb_ZIP_buf: can not find ZIP hea
(bootloader) der
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 22
(bootloader) ERR Update zip file failed.
(bootloader) ERR ZIP ERROR, exit read zip loop
(bootloader) ERR ZIP signature checking failed...
(bootloader) Update zip file OK
(bootloader) ERR ZIP ERROR CODE, 22
(bootloader) [email protected]
FAILED (remote: 22 RU_HEADER_ERROR )
finished. total time: 91.572s
First thing I would do is get a fresh download of the RUU update and try that.

[Q] fastboot oem rebootRUU error us version

Could somebody read this log and tell me whats wrong?
I think my partitions are no good.
I got the phone in this condition, so I dont know what was done it prior me receiving the unit. it is stuck in the bootloader.
usb debugging is off, S on
C:\Users\Rick\Downloads\mini-sdk>fastboot oem lock
... (bootloader) Device was already locked!
OKAY
C:\Users\Rick\Downloads\mini-sdk>fastboot oem unlock
... (bootloader) [ERR] Command error !!!
OKAY
C:\Users\Rick\Downloads\mini-sdk>fastboot oem lock
... (bootloader) Device was already locked!
OKAY
C:\Users\Rick\Downloads\mini-sdk>fastboot reboot-bootloader
rebooting into bootloader... OKAY
C:\Users\Rick\Downloads\mini-sdk>fastboot oem rebootRUU
... (bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) Failed Reading block @ 524288
(bootloader) [SD_ERR] sd_read_sector: read sector failed (524288 256)
(bootloader) [ERR] partition_read_emmc(584): error -1
(bootloader) Start Verify: 3
(bootloader) Error: Command never completed
(bootloader) Error: Command timeout error
(bootloader) Error: Command completed with errors
(bootloader) Failed Writing block @ 524288
(bootloader) [SD_ERR] sd_write_sector: write sector failed (524288 256)
OKAY
C:\Users\Rick\Downloads\mini-sdk>fastboot flash zip C:\Users\Rick\Downloads\mini
-sdk/rom.zip
sending 'zip'... (42112 KB) [isLargeZip: 1 fileCount: 1 / 6]
Sending... 10240 KB / 42112 KB
Sending... 20480 KB / 42112 KB
Sending... 30720 KB / 42112 KB
Sending... 40960 KB / 42112 KB
Sending... 42112 KB / 42112 KB
OKAY
writing 'zip'... (bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
FAILnot allowed
FAILED (remote: not allowed)
C:\Users\Rick\Downloads\mini-sdk>
Twisted714 said:
C:\Users\Rick\Downloads\mini-sdk>fastboot oem unlock
... (bootloader) [ERR] Command error !!!
OKAY
Click to expand...
Click to collapse
It's fastboot flash unlocktoken Unlock_code.bin after you've gotten the unlock_code.bin emailed to you through htcdev.
http://forum.xda-developers.com/desire-510/general/guide-how-to-unlock-install-recovery-t2988292
So get that. Do the unlock process. Then connect and open cmd. Type: adb reboot bootloader , then wipe the device with fastboot -w , and finally flash that rom (especially if it's the ruu) you have or download a stock rom from here in the forums by fastboot update [path/to/zip/file/here]. That's my two cents.
thanks for the input.
I have tried unlocking it with the bin file, but it never completes even tho its says it does. i have tried probably 50 times. adb is not responsive. only fastboot seems to work.
What do you mean that it never completes? As in the phone never asks if you want to unlock it?
dipspit said:
What do you mean that it never completes? As in the phone never asks if you want to unlock it?
Click to expand...
Click to collapse
C:\mini-sdk>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)... FAILloading custom splash failed
FAILED (remote: loading custom splash failed)
this is new
this is what usually happens
C:\mini-sdk>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)... OKAY
writing 'unlocktoken'... (bootloader) unlock token check successfully
OKAY
Twisted714 said:
C:\mini-sdk>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)... FAILloading custom splash failed
FAILED (remote: loading custom splash failed)
this is new
this is what usually happens
C:\mini-sdk>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)... OKAY
writing 'unlocktoken'... (bootloader) unlock token check successfully
OKAY
Click to expand...
Click to collapse
I'm curious, what happens when you try a factory reset through the bootloader?
dipspit said:
I'm curious, what happens when you try a factory reset through the bootloader?
Click to expand...
Click to collapse
If anything like one one xl it will corrupt your SD card if its been unlocked.
Sent from my Nexus 5 using XDA Free mobile app
dipspit said:
I'm curious, what happens when you try a factory reset through the bootloader?
Click to expand...
Click to collapse
it returns to the bootloader

[HELP REQUEST] Carrier signal problem on my HTC

Hello XDA, hoping everyone is doing great..
Unfortunately i am not doing so great my HTC has become a pain in the a**! lol
When i first got my HTC it was working great signal was strong and everything was working flawlessly.
I decided to get my device S-off, rooted and change the rom to cm 12.1 i was able to do it fine, i Also have twrp 3 too.
This is the info of my phone:
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4A.16.3250.24
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT358W908664
(bootloader) imei: Hidden
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4135mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-331585dd
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
The carrier was working fine until later on i decided to install Viperone i was able to install it fine and it was working fine when it booted. i did notice that for some reason now my device is back to S-on and has hboot 1.61 which prevents me to get s-off and change the CID because for some reason i'm getting a T-Mobile CID now
Code:
cidnum: T-MOB010
When i rebooted the phone it won't detect the sim card at all when i check the IMEI it displays unknown, same thing with the baseband but if when i do
Code:
fastboot getvar
i see my IMEI there but when the phone is booted when i do *#06# i get unknown. I don't know what went wrong and i am out of ideas.
By the way i not longer on Viperone i changed to a Google version and the same thing happened. First boot i got signal and after reboot no sim card detect it
Is there a way to get it to stock without having to do S-off, iv'e seen a couple of posts but none of the links are working.
I can't flash RUU since i am on 1.61 and can't get it s-off.
Could this be a radio or firmware issue? Or what can be causing this? Or how can i get it back to stock fully without having to s-off if that is possible.
I would really appreciate some help, Thank you very much
jisgore said:
Hello XDA, hoping everyone is doing great..
Unfortunately i am not doing so great my HTC has become a pain in the a**! lol
When i first got my HTC it was working great signal was strong and everything was working flawlessly.
I decided to get my device S-off, rooted and change the rom to cm 12.1 i was able to do it fine, i Also have twrp 3 too.
This is the info of my phone:
The carrier was working fine until later on i decided to install Viperone i was able to install it fine and it was working fine when it booted. i did notice that for some reason now my device is back to S-on and has hboot 1.61 which prevents me to get s-off and change the CID because for some reason i'm getting a T-Mobile CID now
When i rebooted the phone it won't detect the sim card at all when i check the IMEI it displays unknown, same thing with the baseband but if when i do i see my IMEI there but when the phone is booted when i do *#06# i get unknown. I don't know what went wrong and i am out of ideas.
By the way i not longer on Viperone i changed to a Google version and the same thing happened. First boot i got signal and after reboot no sim card detect it
Is there a way to get it to stock without having to do S-off, iv'e seen a couple of posts but none of the links are working.
I can't flash RUU since i am on 1.61 and can't get it s-off.
Could this be a radio or firmware issue? Or what can be causing this? Or how can i get it back to stock fully without having to s-off if that is possible.
I would really appreciate some help, Thank you very much
Click to expand...
Click to collapse
1st, if your phone is back to s-on it's because you did the command to turn it back s-on. It can't change by itself "for some reasons" like youv said. Same thing for the CID.
Anyway you don't need s-off to flash a RUU. Flash the 7.18.531.2 ruu (see the ruu collection thread in the general section). The ruu and instructions how to flash are at post #1 and you'll probably have to follow the guide at the end of post #2 to write the correct version-main before flashing the ruu.
If you still have the same issue after successfuly flashing the RUU then it's an hardware problem, most likely with the baseband processor.
Sent from my HTC One using XDA Labs
alray said:
1st, if your phone is back to s-on it's because you did the command to turn it back s-on. It can't change by itself "for some reasons" like youv said. Same thing for the CID.
Anyway you don't need s-off to flash a RUU. Flash the 7.18.531.2 ruu (see the ruu collection thread in the general section). The ruu and instructions how to flash are at post #1 and you'll probably have to follow the guide at the end of post #2 to write the correct version-main before flashing the ruu.
If you still have the same issue after successfuly flashing the RUU then it's an hardware problem, most likely with the baseband processor.
Sent from my HTC One using XDA Labs
Click to expand...
Click to collapse
Thank you for the brief response alray. I did find that RUU on HTC website im downloading. I will test it and get back to you. Thanks again
i have same problem , have same H-boot , try update RUU , Ota not fix problem , change radio baseband get same error , first boot have signal and working fine no longer phone hang and signal lose after reboot , baseband unknow i dont know what worng .
after trying many times i can't get the RUU to install correctly i have only been able to find the .exe from the htc website. I have tried using the ones on HTC1Guru it installs but then when booting it seems is going to work and loads up but them restarts and i get softbricked and i have to flash recovery again,
EDIT: I found the RUU trying again
Can't flash the ruu:
Code:
:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot oem lock
...
(bootloader) Lock successfully...
(bootloader) mipi display off
(bootloader) mipi_dsi_cmds_tx_ext
(bootloader) pm8921_vreg_disable function, vreg_id = 38
(bootloader) pm8921_vreg_disable function, vreg_id = 1
(bootloader) TZ_HTC_SVC_DISABLE ret = 534642044 (0x1FDDFD7C)
(bootloader) Use PSHOLD to reset device.
FAILED (status read failed (No such file or directory))
finished. total time: 1.164s
C:\Program Files (x86)\Android\android-sdk\platform-tools>fasboot oem rebootRUU
'fasboot' is not recognized as an internal or external command,
operable program or batch file.
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot oem rebootRUU
< waiting for any device >
...
(bootloader) Start Verify: 3
OKAY [ 0.093s]
finished. total time: 0.094s
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot flash zip RUU.zip
target reported max download size of 1514139648 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 94273929 is not a multiple of the block size 4096
sending sparse 'zip' 1/2 (1478648 KB)...
error: write_sparse_skip_chunk: don't care size 94273929 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 94273929 is not a multiple of the block size 4096
OKAY [ 58.548s]
writing 'zip' 1/2...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 218.295s
C:\Program Files (x86)\Android\android-sdk\platform-tools>
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 3.334s]
finished. total time: 3.335s
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot flash zip RUU.zip
target reported max download size of 1514139648 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 94273929 is not a multiple of the block size 4096
sending sparse 'zip' 1/2 (1478648 KB)...
error: write_sparse_skip_chunk: don't care size 94273929 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 94273929 is not a multiple of the block size 4096
OKAY [ 58.552s]
writing 'zip' 1/2...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 523.855s
jisgore said:
Can't flash the ruu:
Code:
:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot oem lock
...
(bootloader) Lock successfully...
(bootloader) mipi display off
(bootloader) mipi_dsi_cmds_tx_ext
(bootloader) pm8921_vreg_disable function, vreg_id = 38
(bootloader) pm8921_vreg_disable function, vreg_id = 1
(bootloader) TZ_HTC_SVC_DISABLE ret = 534642044 (0x1FDDFD7C)
(bootloader) Use PSHOLD to reset device.
FAILED (status read failed (No such file or directory))
finished. total time: 1.164s
C:\Program Files (x86)\Android\android-sdk\platform-tools>fasboot oem rebootRUU
'fasboot' is not recognized as an internal or external command,
operable program or batch file.
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot oem rebootRUU
< waiting for any device >
...
(bootloader) Start Verify: 3
OKAY [ 0.093s]
finished. total time: 0.094s
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot flash zip RUU.zip
target reported max download size of 1514139648 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 94273929 is not a multiple of the block size 4096
sending sparse 'zip' 1/2 (1478648 KB)...
error: write_sparse_skip_chunk: don't care size 94273929 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 94273929 is not a multiple of the block size 4096
OKAY [ 58.548s]
writing 'zip' 1/2...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 218.295s
C:\Program Files (x86)\Android\android-sdk\platform-tools>
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 3.334s]
finished. total time: 3.335s
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot flash zip RUU.zip
target reported max download size of 1514139648 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 94273929 is not a multiple of the block size 4096
sending sparse 'zip' 1/2 (1478648 KB)...
error: write_sparse_skip_chunk: don't care size 94273929 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 94273929 is not a multiple of the block size 4096
OKAY [ 58.552s]
writing 'zip' 1/2...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 523.855s
Click to expand...
Click to collapse
are you using htc_fastboot.exe or the regular fastboot.exe? You must use htc's version of fastboot to flash newer RUU like explained in the ruu thread.
I was using the fastboot from android SDK. I have one I downloaded from HTC website. Do I have to rename it to htc_fastboot ?
jisgore said:
I was using the fastboot from android SDK. I have one I downloaded from HTC website. Do I have to rename it to htc_fastboot ?
Click to expand...
Click to collapse
the name of the file itself doesn't matters just make sure you are using the same name in the command window.
Ok, i am trying again now with the HTC fastboot
I downloaded the ruu.exe from HTC now it go as far as step 4/6 and then i get "Error [132]: Signature error" .
Before i tried this i noticed that when i did "fastboot getvar all" on this part was blank before (version-main: ) and now is showing (version-main: 7.18.531.2) I'm am going to try this method now instead http://forum.xda-developers.com/showthread.php?t=2497614
After succesfully installing the RUU i still have the same problem. Well basically the same but now i get the carrier popping up but it says no service. Will it make a difference if i SuperCID?
jisgore said:
After succesfully installing the RUU i still have the same problem. Well basically the same but now i get the carrier popping up but it says no service. Will it make a difference if i SuperCID?
Click to expand...
Click to collapse
Supercid? CID doesn't affect carrier signal, its only used to determine which versions of ota updates your phone will receive.

Softbrick, need to retrieve pictures, xt890 AP Fastboot Secure

Hi all,
My RAZR i softbricked almost a year ago. I am determined that I will get my holidays pictures from it... please help me do so!
It gets stuck on the intel page when booting normally, I can access fastboot however I think the phone must be locked. In AP fastboot the options are:
Normal Powerup
Recovery
Factory
BP Tools
Switch Console
Power Off
Recovery will ocassionally take me to the sick looking droid.
When trying through RSD Lite I get stuck at 3/10 "boot_signed", and the phone says "preflash validation failed". I think this may be because the fastboot is locked?
When running through this guide: https://forum.xda-developers.com/showthread.php?t=2390573 unbrick.bat can't find libusb0.dll (possibly a windows 10 issue?).
I can't actually remember what version of Android I was running, however I'm pretty sure it was JB.
If anyone can advise as to what I should try next, or whether I can't recover my pictures at all, then please do get in touch.
Greg
GrogSym said:
Hi all,
My RAZR i softbricked almost a year ago. I am determined that I will get my holidays pictures from it... please help me do so!
It gets stuck on the intel page when booting normally, I can access fastboot however I think the phone must be locked. In AP fastboot the options are:
Normal Powerup
Recovery
Factory
BP Tools
Switch Console
Power Off
Recovery will ocassionally take me to the sick looking droid.
When trying through RSD Lite I get stuck at 3/10 "boot_signed", and the phone says "preflash validation failed". I think this may be because the fastboot is locked?
When running through this guide: https://forum.xda-developers.com/showthread.php?t=2390573 unbrick.bat can't find libusb0.dll (possibly a windows 10 issue?).
I can't actually remember what version of Android I was running, however I'm pretty sure it was JB.
If anyone can advise as to what I should try next, or whether I can't recover my pictures at all, then please do get in touch.
Greg
Click to expand...
Click to collapse
First u can try to flash those images manually. The fastboot command then will say a bit more than just that error.
So flash the system and boot image manually.
We can't unlock the bootloader because u will lose all data from the phone.
Hazou said:
First u can try to flash those images manually. The fastboot command then will say a bit more than just that error.
So flash the system and boot image manually.
We can't unlock the bootloader because u will lose all data from the phone.
Click to expand...
Click to collapse
When I try to flash the boot image through fastboot, I get the following:
C:\Users\Greg\Desktop>fastboot boot boot_signed
creating boot image...
creating boot image - 11536384 bytes
downloading 'boot.img'...
OKAY [ 1.432s]
booting...
(bootloader) Command restricted
FAILED (remote failure)
finished. total time: 1.626s
Presumably because this is restricted (ie no root)?
When I try the image file I get:
C:\Users\Greg\Desktop>fastboot flash system system_signed
(bootloader) Variable not supported!
target reported max download size of 104857600 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 733045500 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 626995964 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 515375868 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 407782140 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 296858364 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 185189116 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 74765052 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 8956 is not a multiple of the block size 4096
sending sparse 'system' (90258 KB)...
error: write_sparse_skip_chunk: don't care size 733045500 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 733045500 is not a multiple of the block size 4096
OKAY [ 8.452s]
writing 'system'...
FAILED (remote: Preflash validation failed)
finished. total time: 8.825s
Am I doing something wrong?
GrogSym said:
When I try to flash the boot image through fastboot, I get the following:
C:\Users\Greg\Desktop>fastboot boot boot_signed
creating boot image...
creating boot image - 11536384 bytes
downloading 'boot.img'...
OKAY [ 1.432s]
booting...
(bootloader) Command restricted
FAILED (remote failure)
finished. total time: 1.626s
Presumably because this is restricted (ie no root)?
Click to expand...
Click to collapse
Nope, "root" is only a system thingy and is most commonly used in Android when u can access system files while u are on a running system.
In this case the command "boot" is restricted in the bootloader. No way to enable that one for us. U need to use "flash"
GrogSym said:
When I try the image file I get:
C:\Users\Greg\Desktop>fastboot flash system system_signed
(bootloader) Variable not supported!
target reported max download size of 104857600 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 733045500 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 626995964 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 515375868 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 407782140 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 296858364 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 185189116 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 74765052 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 8956 is not a multiple of the block size 4096
sending sparse 'system' (90258 KB)...
error: write_sparse_skip_chunk: don't care size 733045500 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 733045500 is not a multiple of the block size 4096
OKAY [ 8.452s]
writing 'system'...
FAILED (remote: Preflash validation failed)
finished. total time: 8.825s
Am I doing something wrong?
Click to expand...
Click to collapse
Are u using the "fastboot" executable from the Android sdk? I recommend in this case to use the "mFastboot" executable.
The mfastboot executable in the RSD-Lite package should work just fine.
Just make sure u are using the latest JB (4.1.2) rsd-lite package.
Hazou said:
Nope, "root" is only a system thingy and is most commonly used in Android when u can access system files while u are on a running system.
In this case the command "boot" is restricted in the bootloader. No way to enable that one for us. U need to use "flash"
Are u using the "fastboot" executable from the Android sdk? I recommend in this case to use the "mFastboot" executable.
The mfastboot executable in the RSD-Lite package should work just fine.
Just make sure u are using the latest JB (4.1.2) rsd-lite package.
Click to expand...
Click to collapse
Thank you so much for your continued help - I'm afraid I'm no further ahead. I have tried the following:
C:\Users\Greg\Desktop>mfastboot flash boot boot_signed
(bootloader) Variable not supported!
target max-download-size: 100MB
sending 'boot' (11264 KB)...
OKAY [ 1.421s]
writing 'boot'...
FAILED (remote: Preflash validation failed)
finished. total time: 1.799s
C:\Users\Greg\Desktop>mfastboot flash system system_signed
(bootloader) Variable not supported!
target max-download-size: 100MB
Multi-Flash is enabled!
sending 'system' (102400 KB)...
OKAY [ 9.850s]
writing 'system'...
FAILED (remote: Preflash validation failed)
finished. total time: 10.479s
C:\Users\Greg\Desktop>
The phone returns: (...security version downgraded then)
PIV block validation failed
EIV block validation failed for system
Invalid PIV image: system
Fastboot command failed
Does this suggest I am using the wrong image file? CFC_9.8.2I-50_SMI-29_S7_USASMIJBRTGB.xml
I can't see an alternative for a UK phone on 4.1.2
Maybe I could just fly you to my house and you can fix it for me If there is a tutorial that I should be following that I have missed, then please do let me know.
Many thanks again,
Greg
GrogSym said:
Thank you so much for your continued help - I'm afraid I'm no further ahead. I have tried the following:
C:\Users\Greg\Desktop>mfastboot flash boot boot_signed
(bootloader) Variable not supported!
target max-download-size: 100MB
sending 'boot' (11264 KB)...
OKAY [ 1.421s]
writing 'boot'...
FAILED (remote: Preflash validation failed)
finished. total time: 1.799s
C:\Users\Greg\Desktop>mfastboot flash system system_signed
(bootloader) Variable not supported!
target max-download-size: 100MB
Multi-Flash is enabled!
sending 'system' (102400 KB)...
OKAY [ 9.850s]
writing 'system'...
FAILED (remote: Preflash validation failed)
finished. total time: 10.479s
C:\Users\Greg\Desktop>
The phone returns: (...security version downgraded then)
PIV block validation failed
EIV block validation failed for system
Invalid PIV image: system
Fastboot command failed
Does this suggest I am using the wrong image file? CFC_9.8.2I-50_SMI-29_S7_USASMIJBRTGB.xml
I can't see an alternative for a UK phone on 4.1.2
Maybe I could just fly you to my house and you can fix it for me If there is a tutorial that I should be following that I have missed, then please do let me know.
Many thanks again,
Greg
Click to expand...
Click to collapse
We can't get around that. The error message indicates that the wrong system or other images are flashed into the device. Sry, I have no clue on how to restore that.
Kitkat?
Could it be that failed OTA updates won't allow downgrades?
I have a xt890 that is bootlooping with the very same errors while trying to fastboot flash 4.1.2 en.GB.
I'm coming to the conclusion that the OTA Update partially succeeded and its no longer accepting JB firmware...
Hazou said:
We can't get around that. The error message indicates that the wrong system or other images are flashed into the device. Sry, I have no clue on how to restore that.
Click to expand...
Click to collapse

Error when try to flash stock RUU

Hello everyone,
some months ago i rooted my HTC One (M7) and all works great, but now my camera didn't work. Front camera work sometimes, but rear behave like didn't exist. So i want now to go back to stock ROM, maybe it can help, if not i want to send phone to service.
So far i did this:
- change CID to stock
- lock bootloader
- change bootloader flag (RELOCKED to LOCKED)
and now i must flash stock RUU, but when i try to do this CMD send me error.
I download this RUU (I can't paste link): PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.2_Radio_4T.35.3218.16_10.33Q.1718.01L_release_421790_signed.zip and i type commands:
Code:
adb reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip ruu.zip
And after i do this CMD show me this:
Code:
target reported max download size of 1514139648 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 173350938 is not a multiple of the block size 4096
sending sparse 'zip' (1478649 KB)...
error: write_sparse_skip_chunk: don't care size 173350938 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 173350938 is not a multiple of the block size 4096
OKAY [ 62.557s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) shift signature_size for header checking...
FAILED (remote: 32 header error)
finished. total time: 62.771s
Sorry for my language, i'm from Poland.
Can somebody help me?
darvin55 said:
Hello everyone,
some months ago i rooted my HTC One (M7) and all works great, but now my camera didn't work. Front camera work sometimes, but rear behave like didn't exist. So i want now to go back to stock ROM, maybe it can help, if not i want to send phone to service.
So far i did this:
- change CID to stock
- lock bootloader
- change bootloader flag (RELOCKED to LOCKED)
and now i must flash stock RUU, but when i try to do this CMD send me error.
I download this RUU (I can't paste link): PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.2_Radio_4T.35.3218.16_10.33Q.1718.01L_release_421790_signed.zip and i type commands:
Code:
adb reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip ruu.zip
And after i do this CMD show me this:
Code:
target reported max download size of 1514139648 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 173350938 is not a multiple of the block size 4096
sending sparse 'zip' (1478649 KB)...
error: write_sparse_skip_chunk: don't care size 173350938 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 173350938 is not a multiple of the block size 4096
OKAY [ 62.557s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) shift signature_size for header checking...
FAILED (remote: 32 header error)
finished. total time: 62.771s
Sorry for my language, i'm from Poland.
Can somebody help me?
Click to expand...
Click to collapse
You must use htc_fastboot.exe to flash the ruu (explained at post #1 of the ruu collection thread). Also relocking the bootloader is not required to flash a RUU when s-off (I'm assuming your phone is S-OFF since you were able to change your cid), also explained in at post #1 of the ruu thread. You can download htc_fastboot.exe from androidfilehost.com
I downloaded fastboot for HTC, but maybe it wasn't correct. I try find some fine fastboot and then I write here. Thanks a lot!

Categories

Resources