Database Develop

Secure Fail: Modem issue

Hey Guys, since there is no A6+ forum on XDA so far, I am putting my question in this forum hopefully I get your support.
I have A6+, I flashed official firmware with the right model number, and the process is successful using ODIN tool and I get the green message "PASS".
but after the reboot, it shows this message:
SECURE FAIL: MODEM
Security Error: this phone has been flashed with unauthorized software & is locked.
Any help is appreciated.

you have solved the problem ?

any one have sulition to fix flash a605x

vwz s8 won't install stock firmware

Ok try and do this as best as I can......
I bought a vwz S8 G950U used off someone from offer up was working fine when I bought it so when I got home I factory reseted to get all the users apps games etc off it and then it asked for a Google log in info (which I don't know) and I tryed to email the person but won't respond
So I tryed to install factory to binary to bypass it from what I been reading says I can do well I can get in factory binary now but now I cannot install oem stock firmware which I have downloaded 7.0 (what was on it ) says factory binary samsmobile and xda but every time odin3 gives me a fail message I have tryed odin3 3.127,3.13.1,3.12.3 and I think 1 more but every time I get a error....
So right now when I turn on the it his to factory binary mode and don't know of this helps but the battery won't charge past 80%....
What I'm asking if someone can be kind enough to help me out with this issue
P.S. I also tryed to instill Oreo 8.0 also but failed as well....
I can get any I go and post pics if that helps as well
Thank you in advance Jason A.KA. PpperoniRedd

trying to flash SM-G950U to stock and I keep getting SW Rev Check Fail fused 5 Binary 1
could anyone point me to what file i need to use i would appreciatw greatly as it has been a week and i have search on google and youtube and i can't figure it out
VZW S8 that had had FRP lock so i flashed to combination file and now I have only binary mode when the phone boot
when i go in binary mode and check under settings i have the followings
SM-G950U
Android 8.0
Secuirty Level Feb 1 2017
baseband: G950USQU5CRF1
Kernel 4.4.16-13344735
build NRD90M.FA70_G950USQU5ARG4
Download mode I have
Carrier : VZW
RPMB fuse blow
RPMB Provisioned
Current Binary: Samsung official
System Status : Official
FRP Lock : off
warranty void 0x0.
qualcom secure boot enabled
RP SWREV B5 (2.1.1.1.1) K4 S5
secure download enabled

G950usqu5crf1
I have the same problem, somebody already fix the problem?

does anyone know where to go after that error?, same error here if someone can point to the right direction will be appreciated

i have the same issue too, any idea guys?

0x0null said:
i have the same issue too, any idea guys?
Click to expand...
Click to collapse
5th digit back is boot loader bit number. This error is commonly from trying to flash with older firm Ware than on the devices

TheMadScientist said:
5th digit back is boot loader bit number. This error is commonly from trying to flash with older firm Ware than on the devices
Click to expand...
Click to collapse
I don't think so because i have 2 S8 with similar issues. I have the latest march firmware plus its confirmed bit5

Galaxy S6 CF-AUTO-ROOT doesn't work

Hello I've bought a secondhand
Samsung Galaxy S6 (refurbished)
It is a Verizon or T-mobile phone (Not sure, don't know US carriers. Model says SM-G920T, must be T-mobile, I suppose... )
Seller claimed it is unlocked for other carriers, and it is, it works fine with Canadian carriers SIM cards.
But Samsung pay and Samsung Health wouldn't open, saying the phone is ROOTED.
I've downloaded the RootChecker app, and tested the phone, result:
it isn't rooted.
Background info:
Settings -> About Device -> Status -> Device status
Custom
Settings -> About device -> Model Number
SM-G920T
Settings -> About device -> Build number
NRD90M.G920TUVS6FRC1
My Android version is 7.0
Developer options
OEM unlock - yes
I've downloaded and installed Samsung drivers
developer[.]samsung[.]com/galaxy/others/android-usb-driver-for-windows[/url]
Then, found this
desktop[.]firmware[.]mobi/device:411/firmware:15878
Friendly name Galaxy S6
Model SM-G920T
Name zerofltetmo
Device zerofltetmo
Board universal7420
Android
- Release 7.0
Display ID NRD90M.G920TUVS6FRC1
It is precisely what my phone is.
Odin connected the phone and flashed the firmware
Odin says PASS
Device reboots
(NO blue "Pirate" Android screen)
Just Ordinary SAMSUNG screen with
RED writing
Recovery is not Seandroid Enforcing
And device reBoots to normal
I've tested with RootChecker, no root.
Am I missing something? It seemed super easy in the guides and on Youtube.
And it was simple, aside from the fact phone is not rooted in the end... :laugh:

i'm facing the same issue.what's the solution?

Samsung Note 8 N950F stock ROM Failed in Odin mode

I have a Samsung Galaxy Note 8 SM-N950F and I am looking to put it back on stock ROM. I have tried downloading several N950F stock BTU ROM's and I tried to flash it in Odin and it gives a message that says FAILED, and my phone that is in download mode says 'sw rev check fail bootloader device 5 binary 1'. I don't know what the problem is. I need to fix this phone as soon as possible, so if you can assist me I would gladly appreciate it.

UcheOJ said:
I have a Samsung Galaxy Note 8 SM-N950F and I am looking to put it back on stock ROM. I have tried downloading several N950F stock BTU ROM's and I tried to flash it in Odin and it gives a message that says FAILED, and my phone that is in download mode says 'sw rev check fail bootloader device 5 binary 1'. I don't know what the problem is. I need to fix this phone as soon as possible, so if you can assist me I would gladly appreciate it.
Click to expand...
Click to collapse
What is your baseband (in about phone/software info)? eg. N950FXXU5CRK1
If your baseband has N950FXX(S or U)5.... (notice the U5, and pay attention to the "#" after U or S). Find the correct firmware with that number or higher and flash it.
You can Not flash any firmware with N950FXXU4(3,2,1) on top of the installed N950FXXU5.... the bootloader won't allow it.
Try another cable or USB slot and see if the usb-c slot isn't dirty. Also make sure you have the latest ODIN software.

My note 9 is blocked on "Custom Binary Blocked By FRP Lock", Odin doesn't worked

Hello everyone,
I'm currently experiencing a problem on my Note 9 since yesterday. I can no longer start it and every time I try I have a red message in the top left that says "Custom Binary Blocked By FRP Lock". I specify that I bought the phone new and I did not try to install any exotic firmware or whatever. After many searches, I wanted to install from the site Sammobile and the software Odin the right firmware while obviously wanting to keep my data (several well done tutorials are present on Youtube).
After many attempts to flash the phone with Odin (an old version as well as a new one) and from several firmwares (more or less recent as well), nothing works, the phone keeps restarting in loop as long as I keep the buttons pressed to tell me always the same message: "Custom Binary Blocked By FRP Lock".
A big thank you to whoever can help me !