Related
I just downloaded R3AA010 (generic). The file is APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010.image
My X1 is HARDspl. Does this mean I can simply rename that file to kovsimg.nbh and flash it from the memory card? Or do I need to convert it somehow? I read
the tutorial but it says i need to change from .image --->.image.nbh
Can I simply rename the file to kovsimg.nbh and flash it?
Any help would be appreciated!
you can simply rename, i did it and it works fine
DriveBuyB said:
I just downloaded R3AA010 (generic). The file is APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010.image
My X1 is HARDspl. Does this mean I can simply rename that file to kovsimg.nbh and flash it from the memory card? Or do I need to convert it somehow? I read
the tutorial but it says i need to change from .image --->.image.nbh
Can I simply rename the file to kovsimg.nbh and flash it?
Any help would be appreciated!
Click to expand...
Click to collapse
This is the way you can flash from your computer (when the X1 is connected via ActiveSync / WMDC)
1. Download X1_CustomRUU.exe and put that in the same directory as your rom.
2. Rename your rom from .image to .nbh (the rest of the name doesn't matter)
3. Execute X1_CustomRUU.exe and follow the steps on the screen.
If you want to use SD-card flashing you have to
1. Rename it to kovsimg.nbh (I don't know if the case is important)
2. Copy to the root of the SD-card (i.e. not in a sub directory)
3. Power off the X1
4. Enter bootloader bij pressing 'volume down' and a little later 'power' until you see a four-colored screen (red / green / blue / white). If everything goes well it will flash automatically
*Update: These instructions now seem to be outdated. I will started an updated thread here: http://forum.xda-developers.com/showthread.php?t=648045
------------
(sorry I tried to post some live links, but the forum won't allow them cause I'm a new user, so this may not be as helpful as I hoped...)
I just spent some hours wading through the forums to find complete instructions for installing the newer android builds using the WM haret.exe linux booter (rather than flashing the entire phone and loosing WM) on my touch Vouge.
I am a bit of a newb, but since I did not find complete instructions, and had to figure some things out using trial and error I thought I would post what I did figure out here in hopes of helping others.
First ignore the install instructions here. sourceforge.net/apps/trac/androidhtc/wiki/HowToInstall . They are old and need to be updated.
Erase all previous android files from your sd card
Go here: sourceforge.net/projects/androidhtc/files/
haretinstall.zip
open the zip and place the andboot folder and all its contents on the / directory of your SD card
then download eclair252_androidinstall.zip
unzip eclair252_androidinstall.zip to get androidinstall.tar
copy androidinstall.tar to your sdcard /andboot folder
(unnecessarily steps deleted - see below)
Then on your phone's file explorer run haret.exe from /andboot folder on you sd card
click run and immediately hold the volume switch up as linux boots
the boot menu appears. choose install
if the installation hangs hold volume up again, and choose quit
As I said I'm new at this, so my instructions may be off or misguided. If so please post with corrections. I just know I was looking for a guide like this and couldn't find one so hope this helps someone.
umbilicalbungee said:
(sorry I tried to post some live links, but the forum won't allow them cause I'm a new user, so this may not be as helpful as I hoped...)
I just spent some hours wading through the forums to find complete instructions for installing the newer android builds using the WM haret.exe linux booter (rather than flashing the entire phone and loosing WM) on my touch Vouge.
I am a bit of a newb, but since I did not find complete instructions, and had to figure some things out using trial and error I thought I would post what I did figure out here in hopes of helping others.
First ignore the install instructions here. sourceforge.net/apps/trac/androidhtc/wiki/HowToInstall . They are old and need to be updated.
Erase all previous android files from your sd card
Go here: sourceforge.net/projects/androidhtc/files/
download basefiles.zip
open the zip and place the andboot folder and all its contents on the / directory of your SD card
then download eclair252_androidinstall.zip
unzip eclair252_androidinstall.zip to get androidinstall.tar
copy androidinstall.tar to your sdcard /andboot folder
then download vogueeclairnbh.zip
unzip vogueeclairnbh.zip to get VOUGIMGx480.NBH
copy VOUGIMGx480.NBH to your sdcard /andboot folder
Then on your phone's file explorer run haret.exe from /andboot folder on you sd card
click run and immediately hold the volume switch up as linux boots
the boot menu appears. choose install
if the installation hangs hold volume up again, and choose quit
As I said I'm new at this, so my instructions may be off or misguided. If so please post with corrections. I just know I was looking for a guide like this and couldn't find one so hope this helps someone.
Click to expand...
Click to collapse
Actually, you just answered my question (which I never posted) about NoRootFS.... Thanks for posting this!!!!
THANK YOU!!!
can you explain what is the benefits of doing it this way compared to the way its always been for me. it was as simple as downloading the sqsh package zip file from my favorite build here. witch included all the files i needed to run anroid. I copied the android folder from the zip file to the root of my sd card and simply ran haret exe. It used to be complicated but not now that most builds include all the basefiles needed for boot. I never had to hold any volume buttons or install anything. i probably look dumb for asking this.
incubus26jc said:
can you explain what is the benefits of doing it this way compared to the way its always been for me. it was as simple as downloading the sqsh package zip file from my favorite build here. witch included all the files i needed to run anroid. I copied the android folder from the zip file to the root of my sd card and simply ran haret exe. It used to be complicated but not now that most builds include all the basefiles needed for boot. I never had to hold any volume buttons or install anything. i probably look dumb for asking this.
Click to expand...
Click to collapse
Although I have not yet tried myself because I have a Polaris and WiFi is not yet working, my understanding is that NoMoRootFS makes more space available for the ROM and makes it easier for developers to roll out updates. In the thread for Myn's (most excellent) Warm Donut, there are several themes and updates that can only be applied to Rev2 if you have installed via NoMoRootFS.
umbilicalbungee said:
First ignore the install instructions here. sourceforge.net/apps/trac/androidhtc/wiki/HowToInstall . They are old and need to be updated.
Erase all previous android files from your sd card
Go here: sourceforge.net/projects/androidhtc/files/
download basefiles.zip
open the zip and place the andboot folder and all its contents on the / directory of your SD card
then download eclair252_androidinstall.zip
unzip eclair252_androidinstall.zip to get androidinstall.tar
copy androidinstall.tar to your sdcard /andboot folder
[*]then download vogueeclairnbh.zip
[*]unzip vogueeclairnbh.zip to get VOUGIMGx480.NBH
[*]copy VOUGIMGx480.NBH to your sdcard /andboot folder
Then on your phone's file explorer run haret.exe from /andboot folder on you sd card
click run and immediately hold the volume switch up as linux boots
the boot menu appears. choose install
if the installation hangs hold volume up again, and choose quit
Click to expand...
Click to collapse
I think that this step is not needed. The NBH files were made for flash your phone. If you run Haret is not needed.
Am I right?
ryomahino said:
I think that this step is not needed. The NBH files were made for flash your phone. If you run Haret is not needed.
Am I right?
Click to expand...
Click to collapse
correct. with the OP method, the .nbh file is just taking up space. you never need to do anything with a .nbh file if you are using haret. OP, please fix and I will add to my list of FAQs, otherwise very informative. thx.
Help
I can't get this to boot on my Vogue. The black Linux screen pops up & starts running but stops. The last line says...
[ 2.226233] Rebooting in 3 seconds.._
I've followed your instruction to the letter & can't see to get it to work. Anyone have suggestions?
Emmie0702 said:
I can't get this to boot on my Vogue. The black Linux screen pops up & starts running but stops. The last line says...
[ 2.226233] Rebooting in 3 seconds.._
I've followed your instruction to the letter & can't see to get it to work. Anyone have suggestions?
Click to expand...
Click to collapse
Did you get into the install menu by holding volume up? easiest and quickest way to help you is if you describe exactly what you did - I know it is similar to the OP, but just give a step by step in your own words.
I did all of the steps but linux boot stops at : failed to reach system.img on SD Card...
tatnai said:
Did you get into the install menu by holding volume up? easiest and quickest way to help you is if you describe exactly what you did - I know it is similar to the OP, but just give a step by step in your own words.
Click to expand...
Click to collapse
Did didn't get past the Linux menu. It only ran for about 4 or 5 seconds then locked up. I had to soft reset to get my phone functioning again.
I did exactly what the instructions in the 1st post said to do.
Downloaded andboot file to \storage card\andboot
Downloaded androidinstall.zip & placed in the andboot file
Clicked haret.exe
Selected run while holding up the volume key
I read in the post that the below items were not necessary so I skipped them:then download vogueeclairnbh.zip
unzip vogueeclairnbh.zip to get VOUGIMGx480.NBH
copy VOUGIMGx480.NBH to your sdcard /andboot folder
I'm running stock rom. My carrier is nTelos (CDMA).
I notice that your rom version and radio version are not the latest. You may have to ungrade those before you can get it to run.
Emmie0702 said:
Did didn't get past the Linux menu. It only ran for about 4 or 5 seconds then locked up. I had to soft reset to get my phone functioning again.
I did exactly what the instructions in the 1st post said to do.
Downloaded andboot file to \storage card\andboot
Downloaded androidinstall.zip & placed in the andboot file
Clicked haret.exe
Selected run while holding up the volume key
I read in the post that the below items were not necessary so I skipped them:then download vogueeclairnbh.zip
unzip vogueeclairnbh.zip to get VOUGIMGx480.NBH
copy VOUGIMGx480.NBH to your sdcard /andboot folder
I'm running stock rom. My carrier is nTelos (CDMA).
Click to expand...
Click to collapse
Stevevo said:
I notice that your rom version and radio version are not the latest. You may have to upgrade those before you can get it to run.
Click to expand...
Click to collapse
always good to have latest radio. i don't know if it will interfere with you booting linux, usually it creates problems with gps or data once you are in android. but who knows, anything is possible I suppose.
list the files that are in /sdcard/andboot/ emmie0702
I've always wanted to update me ROM but there is not a Server cab out there that will give me back my settings for nTelos. Its a small cell network therefore no one has bothered to create one (I really can't blame them). So I've never tried it out of fear of Bricking my phone. For some reason nTelos did not offer WiFi, GPS or MMS with this phone through their network (didn't know that until AFTER I bought it). They have it for other phones but not this one for some reason. That was a little annoying when I 1st got it but I've leaned to live without it. I love my phone even w/o those things. I get pics emailed to me & can email them to other's phone through their carrier address (eg [email protected]). WiFi would be nice but I never use GPS. As far as the Radio. I assume it sort of the same step. I pretty much have to install it & it will wipe out or "Hard Reset" my phone, right...causing me to losing all my network info?
Here are the files I have in the andboot folder:
androidinstall
default
haret
initrd
READE-BASEFILES
zImage
zImage-eclair
** I could not file the "eclair252_androidinstall.zip" file to download so I downloaded the androidinstall.zip under the "2010-01-05" folder from sourceforge.net/projects/androidhtc/files/. Could that be the problem or could it be a combination of my Radio/ROM & the androidinstall tar I downloaded?
Thanks for the help guys!
is it androidinstall.zip or androidinstall.tar?
tatnai said:
is it androidinstall.zip or androidinstall.tar?
Click to expand...
Click to collapse
File Name: androidinstall
File Type: WinRAR archive (.tar)
Emmie0702 said:
I've always wanted to update me ROM but there is not a Server cab out there that will give me back my settings for nTelos. Its a small cell network therefore no one has bothered to create one (I really can't blame them). So I've never tried it out of fear of Bricking my phone. For some reason nTelos did not offer WiFi, GPS or MMS with this phone through their network (didn't know that until AFTER I bought it). They have it for other phones but not this one for some reason. That was a little annoying when I 1st got it but I've leaned to live without it. I love my phone even w/o those things. I get pics emailed to me & can email them to other's phone through their carrier address (eg [email protected]). WiFi would be nice but I never use GPS. As far as the Radio. I assume it sort of the same step. I pretty much have to install it & it will wipe out or "Hard Reset" my phone, right...causing me to losing all my network info?
Here are the files I have in the andboot folder:
androidinstall
default
haret
initrd
READE-BASEFILES
zImage
zImage-eclair
** I could not file the "eclair252_androidinstall.zip" file to download so I downloaded the androidinstall.zip under the "2010-01-05" folder from sourceforge.net/projects/androidhtc/files/. Could that be the problem or could it be a combination of my Radio/ROM & the androidinstall tar I downloaded?
Thanks for the help guys!
Click to expand...
Click to collapse
you should be able to update your radio without touching your rom, there is a radio only version of 3.42.50, see the faqs noob guide to flashing, it is in there.
I am unsure what you downloaded; it looks like you have the right basefiles, but if you got androidinstall.zip from 2010-01-05 I don't think it will have anything compatible with the norootfs method, and is probably causing your problem.
delete androidinstall.tar, download this and drop the androidinstall.tar that is inside into your sdcard/andboot/ folder. then run haret and keep holding volume up until you see the install menu. then post back.
tatnai said:
you should be able to update your radio without touching your rom, there is a radio only version of 3.42.50, see the faqs noob guide to flashing, it is in there.
I am unsure what you downloaded; it looks like you have the right basefiles, but if you got androidinstall.zip from 2010-01-05 I don't think it will have anything compatible with the norootfs method, and is probably causing your problem.
delete androidinstall.tar, download this and drop the androidinstall.tar that is inside into your sdcard/andboot/ folder. then run haret and keep holding volume up until you see the install menu. then post back.
Click to expand...
Click to collapse
OK. Same thing...phone locks up at the same place. I downloaded the file you attached & downloaded the VOGUIMG.nbh file that was linked on PPCGeeks. I followed the instructions on PPCGeeks post "This is the vogue radio 3.42.50 designed for the vogue (this is not the titan port). I removed it directly from the bell rom and recomplied it as a radio only .nbh. This is a radio only rom designed to be flashed from bootloader from sd card and doesn't require a hard reset. Copy VOGUIMG.nbh to root of fat32 micro sd card 2gb or less and place phone in bootloader and it will run."
I still get the same outcome. Both your attachment & the VOGUIMG.nbh file are located \Storage Card\ on my phone. When the Radio instructions say its designed to be flashed from Bootloader what exactly does that mean? Do I need a program for that or is it suppose to start when I Run the default.txt after I select haret in the andboot folder?
the place you got the link to the radio only version also has instructions on how to flash your phone - see the before starting area. short: get into bootloader mode, then flash.
I still think there is something else that you are doing wrong, I just can't put my finger on it right now; i'm hoping others will be able to help.
tatnai said:
the place you got the link to the radio only version also has instructions on how to flash your phone - see the before starting area. short: get into bootloader mode, then flash.
I still think there is something else that you are doing wrong, I just can't put my finger on it right now; i'm hoping others will be able to help.
Click to expand...
Click to collapse
OK. I figured out how to get it in bootloader mode (power button + camera + soft reset). The Red/Blue/Green screen pops up & then a Grey screen that says "loading...". Its been "loading" for over 5 minutes now. What could be the problem?
My Top screen of my phone literally just slide off the bottom, So I need to send it back in to get a new one, But my charging port wont let my phone sync with my computer for some reason. So can someone please convert this new ROM from http://www.htc.com/us/support/tilt-2-att/downloads/ so I can flash it with my SD card and return it soon!
Dragonmaster0430 said:
My Top screen of my phone literally just slide off the bottom, So I need to send it back in to get a new one, But my charging port wont let my phone sync with my computer for some reason. So can someone please convert this new ROM from http://www.htc.com/us/support/tilt-2-att/downloads/ so I can flash it with my SD card and return it soon!
Click to expand...
Click to collapse
All You Have To Do Is Download The Rom From The Url You Posted Then When You Have It On Your Computer Right Click On It & Select Extract Files Then Open The Folder That Gets Extracted & Find RUU_signed.nbh & Rename It RHODIMG.nbh Then Put It On Your Storage Card & Flash & You Should Be Good To Go
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
I Hope This Helps!!!
if your sending it back to your service provider they dont really check the rom they focus the issue and the flash it back to there settibg. my friend and i have done it without the stock rom
groove6969 said:
if your sending it back to your service provider they dont really check the rom they focus the issue and the flash it back to there settibg. my friend and i have done it without the stock rom
Click to expand...
Click to collapse
Rlly? cause I was told if any software is found on the phone when its sent back,ill be charged for a full price?
If you are on AT&T, you have to restore the stock ROM or you will be charged. You also need to restore the SPL.
Problem
I flashed abck to default stock rom some time agon and they voided my warranty just because id didnt return to stock spl. They are full of nonsense over here
i have done numbers of returns of from tilt 1 too the fuze and the tilt 2 for warranty exchange and never had a problem but if u feel confortable follow the steps from the previous post to conver the file over just extract the file and then convert the name over to rhodimg for the nbh filr and put to ur main root of the sd card and flash it that way it will install the stock rom
Doo Doo said:
All You Have To Do Is Download The Rom From The Url You Posted Then When You Have It On Your Computer Right Click On It & Select Extract Files Then Open The Folder That Gets Extracted & Find RUU_signed.nbh & Rename It RHODIMG.nbh Then Put It On Your Storage Card & Flash & You Should Be Good To Go
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Rhodium Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to RHODIMG.nbh
4. Copy the RHODIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
I Hope This Helps!!!
Click to expand...
Click to collapse
When I right-click on it, i dont get a option for "Extract"
Dragonmaster0430 said:
When I right-click on it, i dont get a option for "Extract"
Click to expand...
Click to collapse
Are You Right Clicking On This RUU_Rhodium_S2_Cingular_US_2.10.502.4_Radio_Rhodium_4.49.25.95_Signed_Ship.exe ?
Are You Using Winrar To Extract ?
Doo Doo said:
Are You Right Clicking On This RUU_Rhodium_S2_Cingular_US_2.10.502.4_Radio_Rhodium_4.49.25.95_Signed_Ship.exe ?
Are You Using Winrar To Extract ?
Click to expand...
Click to collapse
Umm when I downloaded it from the link I got "HTC_Tilt 2_2.10.502.4.exe"
Did I do something wrong?
I don't have Winrar, my trail expired..I do 7-zip though
Dragonmaster0430 said:
Umm when I downloaded it from the link I got "HTC_Tilt 2_2.10.502.4.exe"
Did I do something wrong?
I don't have Winrar, my trail expired..I do 7-zip though
Click to expand...
Click to collapse
I Don't Think It Matters What The Name Is You Should Still Be Able To Extract The Exe File Download Winrar Again & Try To Extract It
Doo Doo said:
I Don't Think It Matters What The Name Is You Should Still Be Able To Extract The Exe File Download Winrar Again & Try To Extract It
Click to expand...
Click to collapse
ok so I got the file on my SD card, but I forgot the button combo to flash it, I get to the tricolored screen then it takes me to the hard reset. What button combo do i need to flash?
Think i got it!
Just let us know when you need help with flashing back to stock rom btw with the stock rom that was just updated for the AT&T with sense it has a lot of problems so you may want to flash it as soon as you get the replacement.
Dragonmaster0430 said:
Rlly? cause I was told if any software is found on the phone when its sent back,ill be charged for a full price?
Click to expand...
Click to collapse
Just make sure to flash stock rom and respl your phone if you hgarsled it. coz spl voids the warranty.
it doesn't matter how many softwares you have on your phone when i sent my phone i had spbmobile shell installed on it plus nitrogen core player and all the crap so it doesn't really make any difference.
my phone had a little crack near usb and when they asked me i said nothing is wrong with it there is not even a small scratch on my phone
I have the bootloader cracked by me phone. I have followed all the steps then. When I'm in der Reboot the flash recovery at me Mobile, then I can not find the file find (Super user or whatever). I don't know where I should post the file on mobile to be able to find me. I can not come in those folders on the computer, but on the phone though. I have tried via ASTRO only that I can't. I have listed below a 2 movies uploaded so you guys can see what I mean. (sorry for me bad English, I use a translator)
i send the links later i cant post it now
please help me
Here are the links :
part 1
http://www.youtube.com/watch?v=FO0luugWLeU
part 2
http://www.youtube.com/watch?v=tlUeEozQCss
Anyone??
I'll try to speak very clear English so when you use the translator it comes out nicely....put the "supersu" zip in your download folder...
Click install in twrp...click on "sdcard"...click on "download".. find the zip and click on it
The folder remains empty. Someone else?
Diffeax said:
The folder remains empty. Someone else?
Click to expand...
Click to collapse
What you need to do is:
- start your phone
- Unlock it
- Connect it to you PC with the USB cable
- Copy the supersu.zip file on the SD card of you phone, for exemple create a new folder called "SuperUser" on the root of your sd card
- Restart your phone in recovery
- choose to install zip from sdcard
- go in the /sdcard/SuperUser folder, choose the supersu.zip file and flash it
hi. iv'e been lookin in alot of threads but no luck so far. been doing about 200 dload updates without any more luck. first of all my bluetooth, nfc or nothing like that is working (the wifi is workin and the phone itself works otherwise) so i tried many times to install twpr without any luck. if i use fastboot it goes to the part where it should install the files. then it says : FAILED (remote: image verification error)
locked bootloader and guess i can't do much there now? all the pages i get send to is down. and read something about that it would be like taht for now?
i guess ive just worked myself blind now, so migh be easy, but i can't see it. so can anyone help here?
screenshot fro m the info about device attached
Let me help you, I have a mega folder just for that, gimme a sec
But first tell me what oeminfo have you had before? C432?
rupiec/ said:
Let me help you, I have a mega folder just for that, gimme a sec
But first tell me what oeminfo have you had before? C432?
Click to expand...
Click to collapse
not sure. u see i sold the phone, so did a wipe on it. then it just flipped. so i went and locked for a stock rom and installed that. booted up the phone and it worked. i did not check BT and all that. so the guy gave it back to me and asked if i could fix it.. so heh can't remember what was on it
Do you have any telegram/facebook/whatsapp anything? I could help you more hmm "live"
This way we'd also avoid making a mess in this thread
and if i input that code for project menu *#*#2846579#*#* it just goes back to dialer. nothing else.
kansel said:
hi. iv'e been lookin in alot of threads but no luck so far. been doing about 200 dload updates without any more luck. first of all my bluetooth, nfc or nothing like that is working (the wifi is workin and the phone itself works otherwise) so i tried many times to install twpr without any luck. if i use fastboot it goes to the part where it should install the files. then it says : FAILED (remote: image verification error)
locked bootloader and guess i can't do much there now? all the pages i get send to is down. and read something about that it would be like taht for now?
i guess ive just worked myself blind now, so migh be easy, but i can't see it. so can anyone help here?
screenshot fro m the info about device attached
Click to expand...
Click to collapse
See this :View attachment 4565599
Use only Step 4,Because you're already on C900B300
Dowload this:http://download-c.huawei.com/download/downloadCenter?downloadId=91706&version=358116&siteCode=cz,and unzip.
You're on Android 6 now, go to the settings, system update and Upgrade,There will be more upgrades.:good:
mrleja said:
See this :View attachment 4565599
Use only Step 4,Because you're already on C900B300
Dowload this:http://download-c.huawei.com/download/downloadCenter?downloadId=91706&version=358116&siteCode=cz,and unzip.
You're on Android 6 now, go to the settings, system update and Upgrade,There will be more upgrades.:good:
Click to expand...
Click to collapse
yeah did try this. whatever i do the install of the second one stops at 20% saying it can't complete update, download it again.. and all the files are correct in dload folder. so this phone is just special
kansel said:
yeah did try this. whatever i do the install of the second one stops at 20% saying it can't complete update, download it again.. and all the files are correct in dload folder. so this phone is just special
Click to expand...
Click to collapse
You say:all the files are correct in dload folder???????????
There should only be one file,UPDATE.APP
1- Install terminal emulator from google play
2- Run this command
Code:
getprop ro.hw.custPath
3- If the output is different from this => /cust/hw/eu => let us know
mrleja said:
You say:all the files are correct in dload folder???????????
There should only be one file,UPDATE.APP
Click to expand...
Click to collapse
yeah in that last one there was only update file. but did try different types. and some had more files. and then i also tried with only the update file. so did try everything there. just stops at 20%
Arnys said:
1- Install terminal emulator from google play
2- Run this command
Code:
getprop ro.hw.custPath
3- If the output is different from this => /cust/hw/eu => let us know
Click to expand...
Click to collapse
nope, it's /cust/hw/eu
and the phone was never branded (not locked to any provider) so the locked part itself should not be any issue. the thing is that whatever updates i try, the first small update goes fine. but when i try the second one, it stops at 20% the debugging and everything is ok. and done it all as it should be. now i can't install twpr, i can't put in that dialcode for the project menu (did read that was another way to flash) the phone itself is working, but bluetooth is not. neither nfc and hmm, not sure if any more. now i did insert a SD in the phone, and formated it with the phone. so guess that should work. so im kinda clueless to why none of the updates are working.
kansel said:
nope, it's /cust/hw/eu
Click to expand...
Click to collapse
Edit: maybe first try dload method thease files, seperate, first from update.zip, second from update_full_hw_eu.zip (in dload folder only update.app and then restart phone holding volume + and -)
EVA-L09C432B378 update.zip, update_full_hw_eu.zip and only then try next writed
First, you need download and with dload method instal this https://forum.xda-developers.com/p9/how-to/huawei-p9-rollback-package-eva-l09-t3497882
there are direct download
this file are small, and will configure phone to be able return to android 6
Create backup all files, other things you need, kuz using b136 will wipe all you got there
to return back to android 6 use this package : https://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818
here shortcut to mega site, works well for me
need to work, before start dload charge phone around 70%.
edit: Some questions:
Do you know, how aply dload method? (can you step by step how to? )
Can you enter in fastboot, and send pic what is here ? need to be similar in this picture
Arnys said:
Edit: maybe first try dload method thease files, seperate, first from update.zip, second from update_full_hw_eu.zip (in dload folder only update.app and then restart phone holding volume + and -)
EVA-L09C432B378 update.zip, update_full_hw_eu.zip and only then try next writed
First, you need download and with dload method instal this https://forum.xda-developers.com/p9/how-to/huawei-p9-rollback-package-eva-l09-t3497882
there are direct download
this file are small, and will configure phone to be able return to android 6
Create backup all files, other things you need, kuz using b136 will wipe all you got there
to return back to android 6 use this package : https://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818
here shortcut to mega site, works well for me
need to work, before start dload charge phone around 70%.
edit: Some questions:
Do you know, how aply dload method? (can you step by step how to? )
Can you enter in fastboot, and send pic what is here ? need to be similar in this picture
Click to expand...
Click to collapse
yes fastboot look like that (frp is red if i let the oem lovk in developer settings be enabled) but can make it look just like that yes.
and i insertet a 32gb micro sd card. and made a dload folder in the root of that card. and i put the update file in that folder and i hold volume + and - and power for like 5-6 seconds. and the emui comes up and start the update package
managed to find a working b378 on that last link but can't innstall the update in the megafilelink. says it's not the correct one for my system. so guess i'll try another one. but the phone is garbage soon...
B378 dload 1 update.zip only update.app, then dload 2 update.full.hw.eu.zip only update.app,
then dload small 89mb ?? Update.app from rollback, that's 3 time use dload,
then you need dload 4 all files from mega link, all files, maps, as you unzip it, in dload folder need to be update.app and 2 folders.
It's 4 times to do dload, really don't work?
Arnys said:
B378 dload 1 update.zip only update.app, then dload 2 update.full.hw.eu.zip only update.app,
then dload small 89mb ?? Update.app from rollback, that's 3 time use dload,
then you need dload 4 all files from mega link, all files, maps, as you unzip it, in dload folder need to be update.app and 2 folders.
It's 4 times to do dload, really don't work?
Click to expand...
Click to collapse
the first update.zip stopped at 26% now. saying "failed to check the update pacage. please download the pacage again" and that happens all the time. never on the small files, so wonder if i might have to get another sdcard)might be something wrong with it?
so i get to the part where ive got b378 but the phone is still the same..
Arnys said:
B378 dload 1 update.zip only update.app, then dload 2 update.full.hw.eu.zip only update.app,
then dload small 89mb ?? Update.app from rollback, that's 3 time use dload,
then you need dload 4 all files from mega link, all files, maps, as you unzip it, in dload folder need to be update.app and 2 folders.
It's 4 times to do dload, really don't work?
Click to expand...
Click to collapse
i get to the 378. i run full update hw (second one) and the rollback (third one) but it stops when i take the file from mega, 2 folders and the update total 4.4 gb unpacked. so wonder if there might be something with my SD card, it stops on 5% and says failed to check the update pacage, please download the package again. seems kinda like i don't have the right to write to the system or something, since i believe this should be the correct files so im gonna do a last try with different SDcard.
kansel said:
i get to the 378. i run full update hw (second one) and the rollback (third one) but it stops when i take the file from mega, 2 folders and the update total 4.4 gb unpacked. so wonder if there might be something with my SD card, it stops on 5% and says failed to check the update pacage, please download the package again. seems kinda like i don't have the right to write to the system or something, since i believe this should be the correct files so im gonna do a last try with different SDcard.
Click to expand...
Click to collapse
jeah, dont know anything more that culda help.
good luck with different SD.
ps. do you have bootloader code? maybe can try HuRUpdate in twrp or try HWOTA7
there are latest firmware for your phone EVA-L09C432B504: update.zip , update_data_full_public.zip and update_full_EVA-L09_hw_eu.zip
no need sd card for this, but need all files renamed , read and try.
Arnys said:
jeah, dont know anything more that culda help.
good luck with different SD.
ps. do you have bootloader code? maybe can try HuRUpdate in twrp or try HWOTA7
there are latest firmware for your phone EVA-L09C432B504: update.zip , update_data_full_public.zip and update_full_EVA-L09_hw_eu.zip
no need sd card for this, but need all files renamed , read and try.
Click to expand...
Click to collapse
if i could install twpr i guess that would helt. tried all the flash, just get error when i do it in fastboot